Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

/// @title PAYT Token Presale Contract
/// @notice This contract manages the presale of PAYT tokens
contract PAYTPresale is ReentrancyGuard, Ownable {
    using SafeERC20 for IERC20;

    IERC20 public token;
    uint256 public rate;
    uint256 public round;
    uint256 public weiRaised;
    uint256 public totalTokensSold;
    uint256 public totalTokensClaimed;
    uint256 public minPurchaseAmount;
    bool public isPresaleActive = false;
    bool public isPresaleEnded = false;

    modifier whenPresaleActive() { 
        require(isPresaleActive, "TokenPresale: Presale is not active"); 
        _; 
    }

    mapping(address => uint256) public contributions;
    mapping(address => uint256) public tokensBought;

    event TokenPurchasedWithEther(address indexed purchaser, uint256 value, uint256 amount);
    
    /// @notice Constructor to set initial values
    /// @param initialOwner The initial owner of the contract
    /// @param _token The token being sold
    /// @param _rate The rate of token per Ether
    constructor(address initialOwner, address _token, uint256 _rate) Ownable(initialOwner) {
        require(_rate > 0 && _rate < 50000 && address(_token) != address(0) , "TokenPresale: Invalid parameters");
        token = IERC20(_token); 
        rate = _rate;
        minPurchaseAmount = 0.01 ether;
    }

    receive() external payable { 
        buy(); 
    }

    function getCurrentRate() public view returns (uint256) { return rate; }
    function getTotalTokensSold() public view returns (uint256) { return totalTokensSold; }
    function getTokensAvailable() public view returns (uint256) { return token.balanceOf(address(this)); }
    function setRate(uint256 _rate) external onlyOwner { require(_rate > 0 && _rate < 50000, "TokenPresale: Invalid rate"); rate = _rate; }
    function startPresale() external onlyOwner { isPresaleActive = true; }
    function stopPresale() external onlyOwner { isPresaleActive = false; }
    function endPresale() external onlyOwner { isPresaleActive = false; isPresaleEnded = true; }

    function getClaimedAmount(address beneficiary) public view returns (uint256) {
        return tokensBought[beneficiary];
    }

    /// @notice Allows users to buy tokens with ETH
    function buy() public nonReentrant payable whenPresaleActive {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(msg.sender, weiAmount);
        uint256 tokens = _getTokenAmountForEther(weiAmount);

        contributions[msg.sender] += weiAmount;
        tokensBought[msg.sender] += tokens;
        weiRaised += weiAmount;
        totalTokensSold += tokens;

        emit TokenPurchasedWithEther(msg.sender, weiAmount, tokens);
    }
    
    /// @notice Allows users to claim tokens
    function claim() external nonReentrant {
        require(isPresaleEnded, "TokenPresale: Presale is not ended yet!");

        // Doublecheck if the beneficiary did contribute
        uint256 amountContributed = contributions[msg.sender];
        require(amountContributed > 0, "TokenPresale: No contributions found");

        // Calculate the amount of tokens in the different rounds and ensure that the tokens are available to claim
        uint256 tokensToClaim = tokensBought[msg.sender];
        require(tokensToClaim <= token.balanceOf(address(this)), "TokenPresale: Insufficient tokens");

        // Reset contribution to prevent double claiming
        contributions[msg.sender] = 0;
        totalTokensClaimed += tokensToClaim;
        tokensBought[msg.sender] = 0;

        // Transfer tokens to the beneficiary
        token.safeTransfer(msg.sender, tokensToClaim);
    }

    function claimERC20(IERC20 _token) external onlyOwner {
        uint256 contractTokenBalance = _token.balanceOf(address(this));
        uint256 unsoldTokens = contractTokenBalance - totalTokensSold; // Need to put the amount which is left to claim.
        require(unsoldTokens > 0, "TokenPresale: No ERC20 tokens to withdraw");
        _token.safeTransfer(owner(), unsoldTokens);
    }

    function claimETH() external onlyOwner {
        uint256 balance = address(this).balance;
        require(balance > 0, "TokenPresale: No ETH to withdraw");
        address payable to = payable(owner());
        to.transfer(balance);
    }

    function _preValidatePurchase(address beneficiary, uint256 amount) internal view { 
        require(beneficiary != address(0) && amount != 0, "TokenPresale: Invalid purchase parameters"); 
        require(amount >= minPurchaseAmount, "TokenPresale: Amount is less than the minimum purchase amount");
    }

    function _getTokenAmountForEther(uint256 weiAmount) private view returns (uint256) { return weiAmount * rate; }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"initialOwner","type":"address"},{"internalType":"address","name":"_token","type":"address"},{"internalType":"uint256","name":"_rate","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"purchaser","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokenPurchasedWithEther","type":"event"},{"inputs":[],"name":"buy","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"}],"name":"claimERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"contributions","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"endPresale","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"beneficiary","type":"address"}],"name":"getClaimedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCurrentRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTokensAvailable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTotalTokensSold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isPresaleActive","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isPresaleEnded","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minPurchaseAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"round","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_rate","type":"uint256"}],"name":"setRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startPresale","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stopPresale","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"tokensBought","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalTokensClaimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalTokensSold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"weiRaised","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000009c88a8cf9ecbc7776da218f759b09e1f4aebd8430000000000000000000000008ef47555856f6ce2e0cd7c36aef4fab317d2e2e20000000000000000000000000000000000000000000000000000000000004e20

-----Decoded View---------------
Arg [0] : initialOwner (address): 0x9c88A8cF9ECBc7776DA218f759B09e1F4aebd843
Arg [1] : _token (address): 0x8EF47555856f6Ce2E0cd7C36AeF4FAb317d2e2E2
Arg [2] : _rate (uint256): 20000

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000009c88a8cf9ecbc7776da218f759b09e1f4aebd843
Arg [1] : 0000000000000000000000008ef47555856f6ce2e0cd7c36aef4fab317d2e2e2
Arg [2] : 0000000000000000000000000000000000000000000000000000000000004e20