Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import "../interfaces/IDonationsProxy.sol";

interface IWETH is IERC20 {
  function deposit() external payable;
}

contract DonationsProxy is IDonationsProxy {
  using SafeERC20 for ERC20;
  using SafeERC20 for IWETH;

  // The Targeted ERC20 for Swaps
  ERC20 public baseToken;

  // The WETH contract.
  IWETH public immutable WETH;

  constructor(IWETH _weth, ERC20 _baseToken) {
    if (address(_weth) == address(0) || address(_baseToken) == address(0))
      revert CannotBeZeroAddress();
    WETH = _weth;
    baseToken = _baseToken;
  }

  receive() external payable {}

  function _swap(
    ERC20 sellToken,
    ERC20 buyToken,
    uint256 amount,
    address location,
    address spender,
    address payable swapTarget,
    bytes calldata swapCallData,
    uint256 protocolFee
  ) internal {
    uint256 boughtAmount = buyToken.balanceOf(address(this));
    if (sellToken.allowance(address(this), spender) == 0) {
      sellToken.safeApprove(spender, type(uint256).max);
    } else if (sellToken.allowance(address(this), spender) < amount) {
      sellToken.safeApprove(spender, 0);
      sellToken.safeApprove(spender, type(uint256).max);
    }
    (bool success, ) = swapTarget.call{ value: protocolFee }(swapCallData);
    if (!success) revert ZeroXSwapFailed();
    payable(msg.sender).transfer(address(this).balance);
    boughtAmount = buyToken.balanceOf(address(this)) - boughtAmount;
    buyToken.safeTransfer(location, boughtAmount);
  }

  function depositETH(
    ERC20 buyToken,
    uint256 amount,
    address location,
    address spender,
    address payable swapTarget,
    bytes calldata swapCallData
  ) external payable {
    if (buyToken != baseToken) revert IncorrectBuyToken();
    WETH.deposit{ value: amount }();
    emit SwapETH(msg.sender, amount, location);
    _swap(
      ERC20(address(WETH)),
      buyToken,
      amount,
      location,
      spender,
      swapTarget,
      swapCallData,
      msg.value - amount
    );
  }

  function depositERC20(
    ERC20 sellToken,
    ERC20 buyToken,
    uint256 amount,
    address location,
    address spender,
    address payable swapTarget,
    bytes calldata swapCallData
  ) external payable override {
    if (buyToken != baseToken) revert IncorrectBuyToken();
    sellToken.safeTransferFrom(msg.sender, address(this), amount);
    _swap(
      sellToken,
      buyToken,
      amount,
      location,
      spender,
      swapTarget,
      swapCallData,
      msg.value
    );
    emit SwapDeposit(msg.sender, amount, sellToken, location);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, _allowances[owner][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = _allowances[owner][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Spend `amount` form the allowance of `owner` toward `spender`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IThinWallet.sol";

interface IDonationsProxy {
  /** ERRORS */

  /// @notice reverts when a zero address is passed in as a potential admin or smart contract location
  error CannotBeZeroAddress();
  /// @notice reverts when the 0x token swap fails
  error ZeroXSwapFailed();
  /// @notice reverts when the user provides an incorrect buy token
  error IncorrectBuyToken();

  /**
    @notice emits when a user swaps a token to deposit into a thin wallet
    @param user the user who swapped the token
    @param amount the amount the user swapped of their token
    @param token the token that the user swapped
    @param target the thin wallet that the user was depositing into
  */
  event SwapDeposit(address user, uint256 amount, ERC20 token, address target);

  /**
    @notice emits when a user swaps a token to deposit into a thin wallet
    @param user the user who swapped the token
    @param amount the amount the user swapped of their token
    @param target the thin wallet that the user was depositing into
  */
  event SwapETH(address user, uint256 amount, address target);

  /**
    @notice this function is used to swap donated ETH to a desired token before it is deposited into another external contract
    @param buyToken the token that the user wishes to swap for, should be the base token
    @param amount the amount the user is selling of their sellToken
    @param location where the bought tokens will be sent after they are swapped
    @param spender an address provided by the 0x Quote API
    @param swapTarget an address provided by the 0x Quote API
    @param swapCallData the calldata provided by the 0x Quote API
  */
  function depositETH(
    ERC20 buyToken,
    uint256 amount,
    address location,
    address spender,
    address payable swapTarget,
    bytes calldata swapCallData
  ) external payable;

  /**
    @notice this function is used to swap donated ERC20 tokens to a desired token before it is deposited into another external contract
    @param sellToken the token that the user is selling to acquire the base token
    @param buyToken the token that the user wishes to swap for, should be the base token
    @param amount the amount the user is selling of their sellToken
    @param location where the bought tokens will be sent after they are swapped
    @param spender an address provided by the 0x Quote API
    @param swapTarget an address provided by the 0x Quote API
    @param swapCallData the calldata provided by the 0x Quote API
  */
  function depositERC20(
    ERC20 sellToken,
    ERC20 buyToken,
    uint256 amount,
    address location,
    address spender,
    address payable swapTarget,
    bytes calldata swapCallData
  ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.13;

interface IThinWallet {
    error InvalidPermissions(address _user);
    error InvalidAddress();

    struct TokenMovement {
        address token;
        address recipient;
        uint256 amount;
    }

    struct EtherPaymentTransfer {
        address recipient;
        uint256 amount;
    }

    /// ### Events
    event TransferERC20(TokenMovement[] transfers);
    event TransferEther(EtherPaymentTransfer[] transfers);

    /// ### Functions
    /// @notice Initializes the thin wallet clone with the accounts that can control it
    /// @param _admin  This is should be set as the default admin. This will be the donation router
    /// @param _owners  The accounts that can call the transfer functions
    function initialize(address _admin, address[] calldata _owners) external;

    /// @notice Transfers amounts of an ERC20 to one or more recipients
    /// @dev If the `setApprove` field is true, the contract should approve that recipient for type(uint256).max
    /// @param _transfers  An array of transfers. Each transfer object specifies the amount and recipient to send tokens to
    function transferERC20(TokenMovement[] calldata _transfers) external;

    /// @notice Transfers amounts of ether to one or more recipeints
    /// @dev This should use address(recipient).call to transfer the ether
    /// @param _transfers  The ether transfers
    function transferEther(EtherPaymentTransfer[] calldata _transfers) external;

    /// @notice Transfers the current balance of a token to a destination without processing a split
    /// @param _token  The token to transfer
    /// @param _destination  The acccount to send the tokens to
    function emergencyEjectERC20(address _token, address _destination) external;

    /// @notice Transfers the current balance of Ether to the destination without processing a split
    /// @param _destination  The account to send the ether to.
    function emergencyEjectEth(address _destination) external;
}

{
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IWETH","name":"_weth","type":"address"},{"internalType":"contract ERC20","name":"_baseToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CannotBeZeroAddress","type":"error"},{"inputs":[],"name":"IncorrectBuyToken","type":"error"},{"inputs":[],"name":"ZeroXSwapFailed","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"contract ERC20","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"target","type":"address"}],"name":"SwapDeposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"address","name":"target","type":"address"}],"name":"SwapETH","type":"event"},{"inputs":[],"name":"WETH","outputs":[{"internalType":"contract IWETH","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseToken","outputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"sellToken","type":"address"},{"internalType":"contract ERC20","name":"buyToken","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"location","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"address payable","name":"swapTarget","type":"address"},{"internalType":"bytes","name":"swapCallData","type":"bytes"}],"name":"depositERC20","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"buyToken","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"location","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"address payable","name":"swapTarget","type":"address"},{"internalType":"bytes","name":"swapCallData","type":"bytes"}],"name":"depositETH","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7

-----Decoded View---------------
Arg [0] : _weth (address): 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2
Arg [1] : _baseToken (address): 0xdAC17F958D2ee523a2206206994597C13D831ec7

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2
Arg [1] : 000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7