Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: agpl-3.0
// From commit https://github.com/aave/protocol-v2/commit/5f817c7c09139585c7dbc18aef07380ab8148869
pragma solidity >=0.6.12;

import {SafeMath} from '../dependencies/SafeMath.sol';
import {IReserveInterestRateStrategy} from './IReserveInterestRateStrategy.sol';
import {WadRayMath} from '../dependencies/WadRayMath.sol';
import {PercentageMath} from '../dependencies/PercentageMath.sol';
import {ILendingPoolAddressesProvider, ILendingRateOracle} from 'aave-address-book/AaveV2.sol';
import {IERC20} from 'solidity-utils/contracts/oz-common/interfaces/IERC20.sol';

/**
 * @title DefaultReserveInterestRateStrategy contract
 * @notice Implements the calculation of the interest rates depending on the reserve state
 * @dev The model of interest rate is based on 2 slopes, one before the `OPTIMAL_UTILIZATION_RATE`
 * point of utilization and another from that one to 100%
 * - An instance of this same contract, can't be used across different Aave markets, due to the caching
 *   of the LendingPoolAddressesProvider
 * @author Aave
 **/
contract DefaultReserveInterestRateStrategy is IReserveInterestRateStrategy {
  using WadRayMath for uint256;
  using SafeMath for uint256;
  using PercentageMath for uint256;

  /**
   * @dev this constant represents the utilization rate at which the pool aims to obtain most competitive borrow rates.
   * Expressed in ray
   **/
  uint256 public immutable OPTIMAL_UTILIZATION_RATE;

  /**
   * @dev This constant represents the excess utilization rate above the optimal. It's always equal to
   * 1-optimal utilization rate. Added as a constant here for gas optimizations.
   * Expressed in ray
   **/

  uint256 public immutable EXCESS_UTILIZATION_RATE;

  ILendingPoolAddressesProvider public immutable addressesProvider;

  // Base variable borrow rate when Utilization rate = 0. Expressed in ray
  uint256 internal immutable _baseVariableBorrowRate;

  // Slope of the variable interest curve when utilization rate > 0 and <= OPTIMAL_UTILIZATION_RATE. Expressed in ray
  uint256 internal immutable _variableRateSlope1;

  // Slope of the variable interest curve when utilization rate > OPTIMAL_UTILIZATION_RATE. Expressed in ray
  uint256 internal immutable _variableRateSlope2;

  // Slope of the stable interest curve when utilization rate > 0 and <= OPTIMAL_UTILIZATION_RATE. Expressed in ray
  uint256 internal immutable _stableRateSlope1;

  // Slope of the stable interest curve when utilization rate > OPTIMAL_UTILIZATION_RATE. Expressed in ray
  uint256 internal immutable _stableRateSlope2;

  constructor(
    ILendingPoolAddressesProvider provider,
    uint256 optimalUtilizationRate_,
    uint256 baseVariableBorrowRate_,
    uint256 variableRateSlope1_,
    uint256 variableRateSlope2_,
    uint256 stableRateSlope1_,
    uint256 stableRateSlope2_
  ) {
    OPTIMAL_UTILIZATION_RATE = optimalUtilizationRate_;
    EXCESS_UTILIZATION_RATE = WadRayMath.ray().sub(optimalUtilizationRate_);
    addressesProvider = provider;
    _baseVariableBorrowRate = baseVariableBorrowRate_;
    _variableRateSlope1 = variableRateSlope1_;
    _variableRateSlope2 = variableRateSlope2_;
    _stableRateSlope1 = stableRateSlope1_;
    _stableRateSlope2 = stableRateSlope2_;
  }

  function variableRateSlope1() external view returns (uint256) {
    return _variableRateSlope1;
  }

  function variableRateSlope2() external view returns (uint256) {
    return _variableRateSlope2;
  }

  function stableRateSlope1() external view returns (uint256) {
    return _stableRateSlope1;
  }

  function stableRateSlope2() external view returns (uint256) {
    return _stableRateSlope2;
  }

  function baseVariableBorrowRate() external view override returns (uint256) {
    return _baseVariableBorrowRate;
  }

  function getMaxVariableBorrowRate() external view override returns (uint256) {
    return _baseVariableBorrowRate.add(_variableRateSlope1).add(_variableRateSlope2);
  }

  /**
   * @dev Calculates the interest rates depending on the reserve's state and configurations
   * @param reserve The address of the reserve
   * @param liquidityAdded The liquidity added during the operation
   * @param liquidityTaken The liquidity taken during the operation
   * @param totalStableDebt The total borrowed from the reserve a stable rate
   * @param totalVariableDebt The total borrowed from the reserve at a variable rate
   * @param averageStableBorrowRate The weighted average of all the stable rate loans
   * @param reserveFactor The reserve portion of the interest that goes to the treasury of the market
   * @return The liquidity rate, the stable borrow rate and the variable borrow rate
   **/
  function calculateInterestRates(
    address reserve,
    address aToken,
    uint256 liquidityAdded,
    uint256 liquidityTaken,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  ) external view override returns (uint256, uint256, uint256) {
    uint256 availableLiquidity = IERC20(reserve).balanceOf(aToken);
    //avoid stack too deep
    availableLiquidity = availableLiquidity.add(liquidityAdded).sub(liquidityTaken);

    return
      calculateInterestRates(
      reserve,
      availableLiquidity,
      totalStableDebt,
      totalVariableDebt,
      averageStableBorrowRate,
      reserveFactor
    );
  }

  struct CalcInterestRatesLocalVars {
    uint256 totalDebt;
    uint256 currentVariableBorrowRate;
    uint256 currentStableBorrowRate;
    uint256 currentLiquidityRate;
    uint256 utilizationRate;
  }

  /**
   * @dev Calculates the interest rates depending on the reserve's state and configurations.
   * NOTE This function is kept for compatibility with the previous DefaultInterestRateStrategy interface.
   * New protocol implementation uses the new calculateInterestRates() interface
   * @param reserve The address of the reserve
   * @param availableLiquidity The liquidity available in the corresponding aToken
   * @param totalStableDebt The total borrowed from the reserve a stable rate
   * @param totalVariableDebt The total borrowed from the reserve at a variable rate
   * @param averageStableBorrowRate The weighted average of all the stable rate loans
   * @param reserveFactor The reserve portion of the interest that goes to the treasury of the market
   * @return The liquidity rate, the stable borrow rate and the variable borrow rate
   **/
  function calculateInterestRates(
    address reserve,
    uint256 availableLiquidity,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  ) public view override returns (uint256, uint256, uint256) {
    CalcInterestRatesLocalVars memory vars;

    vars.totalDebt = totalStableDebt.add(totalVariableDebt);
    vars.currentVariableBorrowRate = 0;
    vars.currentStableBorrowRate = 0;
    vars.currentLiquidityRate = 0;

    vars.utilizationRate = vars.totalDebt == 0
      ? 0
      : vars.totalDebt.rayDiv(availableLiquidity.add(vars.totalDebt));

    vars.currentStableBorrowRate = ILendingRateOracle(addressesProvider.getLendingRateOracle())
      .getMarketBorrowRate(reserve);

    if (vars.utilizationRate > OPTIMAL_UTILIZATION_RATE) {
      uint256 excessUtilizationRateRatio = vars
        .utilizationRate
        .sub(OPTIMAL_UTILIZATION_RATE)
        .rayDiv(EXCESS_UTILIZATION_RATE);

      vars.currentStableBorrowRate = vars.currentStableBorrowRate.add(_stableRateSlope1).add(
        _stableRateSlope2.rayMul(excessUtilizationRateRatio)
      );

      vars.currentVariableBorrowRate = _baseVariableBorrowRate.add(_variableRateSlope1).add(
        _variableRateSlope2.rayMul(excessUtilizationRateRatio)
      );
    } else {
      vars.currentStableBorrowRate = vars.currentStableBorrowRate.add(
        _stableRateSlope1.rayMul(vars.utilizationRate.rayDiv(OPTIMAL_UTILIZATION_RATE))
      );
      vars.currentVariableBorrowRate = _baseVariableBorrowRate.add(
        vars.utilizationRate.rayMul(_variableRateSlope1).rayDiv(OPTIMAL_UTILIZATION_RATE)
      );
    }

    vars.currentLiquidityRate = _getOverallBorrowRate(
      totalStableDebt,
      totalVariableDebt,
      vars.currentVariableBorrowRate,
      averageStableBorrowRate
    ).rayMul(vars.utilizationRate).percentMul(PercentageMath.PERCENTAGE_FACTOR.sub(reserveFactor));

    return (
      vars.currentLiquidityRate,
      vars.currentStableBorrowRate,
      vars.currentVariableBorrowRate
    );
  }

  /**
   * @dev Calculates the overall borrow rate as the weighted average between the total variable debt and total stable debt
   * @param totalStableDebt The total borrowed from the reserve a stable rate
   * @param totalVariableDebt The total borrowed from the reserve at a variable rate
   * @param currentVariableBorrowRate The current variable borrow rate of the reserve
   * @param currentAverageStableBorrowRate The current weighted average of all the stable rate loans
   * @return The weighted averaged borrow rate
   **/
  function _getOverallBorrowRate(
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 currentVariableBorrowRate,
    uint256 currentAverageStableBorrowRate
  ) internal pure returns (uint256) {
    uint256 totalDebt = totalStableDebt.add(totalVariableDebt);

    if (totalDebt == 0) return 0;

    uint256 weightedVariableRate = totalVariableDebt.wadToRay().rayMul(currentVariableBorrowRate);

    uint256 weightedStableRate = totalStableDebt.wadToRay().rayMul(currentAverageStableBorrowRate);

    uint256 overallBorrowRate = weightedVariableRate.add(weightedStableRate).rayDiv(
      totalDebt.wadToRay()
    );

    return overallBorrowRate;
  }
}

// SPDX-License-Identifier: agpl-3.0
// From commit https://github.com/aave/protocol-v2/commit/8c03180f89eea25e98356b80d8187cb0f12f29cd
pragma solidity >=0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, 'SafeMath: addition overflow');

    return c;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return sub(a, b, 'SafeMath: subtraction overflow');
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
    require(b <= a, errorMessage);
    uint256 c = a - b;

    return c;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
    if (a == 0) {
      return 0;
    }

    uint256 c = a * b;
    require(c / a == b, 'SafeMath: multiplication overflow');

    return c;
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return div(a, b, 'SafeMath: division by zero');
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
    // Solidity only automatically asserts when dividing by 0
    require(b > 0, errorMessage);
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold

    return c;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    return mod(a, b, 'SafeMath: modulo by zero');
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts with custom message when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
    require(b != 0, errorMessage);
    return a % b;
  }
}

// SPDX-License-Identifier: agpl-3.0
// From commit https://github.com/aave/protocol-v2/commit/7f44a0c2422cf08290a7a35b5652b5ef43d4d22f
pragma solidity >=0.6.12;

/**
 * @title IReserveInterestRateStrategyInterface interface
 * @dev Interface for the calculation of the interest rates
 * @author Aave
 */
interface IReserveInterestRateStrategy {
  function baseVariableBorrowRate() external view returns (uint256);

  function getMaxVariableBorrowRate() external view returns (uint256);

  function calculateInterestRates(
    address reserve,
    uint256 availableLiquidity,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  ) external view returns (uint256, uint256, uint256);

  function calculateInterestRates(
    address reserve,
    address aToken,
    uint256 liquidityAdded,
    uint256 liquidityTaken,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  )
  external
  view
  returns (uint256 liquidityRate, uint256 stableBorrowRate, uint256 variableBorrowRate);
}

// SPDX-License-Identifier: agpl-3.0
// From commit https://github.com/aave/protocol-v2/commit/92a731ec2c536734924f5a55d3e6db0385b0c824
pragma solidity >=0.6.12;

import {Errors} from 'aave-address-book/AaveV2.sol';

/**
 * @title WadRayMath library
 * @author Aave
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits precision) and rays (decimals with 27 digits)
 **/

library WadRayMath {
  uint256 internal constant WAD = 1e18;
  uint256 internal constant halfWAD = WAD / 2;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant halfRAY = RAY / 2;

  uint256 internal constant WAD_RAY_RATIO = 1e9;

  /**
   * @return One ray, 1e27
   **/
  function ray() internal pure returns (uint256) {
    return RAY;
  }

  /**
   * @return One wad, 1e18
   **/

  function wad() internal pure returns (uint256) {
    return WAD;
  }

  /**
   * @return Half ray, 1e27/2
   **/
  function halfRay() internal pure returns (uint256) {
    return halfRAY;
  }

  /**
   * @return Half ray, 1e18/2
   **/
  function halfWad() internal pure returns (uint256) {
    return halfWAD;
  }

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @param a Wad
   * @param b Wad
   * @return The result of a*b, in wad
   **/
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0 || b == 0) {
      return 0;
    }

    require(a <= (type(uint256).max - halfWAD) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * b + halfWAD) / WAD;
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @param a Wad
   * @param b Wad
   * @return The result of a/b, in wad
   **/
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfB = b / 2;

    require(a <= (type(uint256).max - halfB) / WAD, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * WAD + halfB) / b;
  }

  /**
   * @dev Multiplies two ray, rounding half up to the nearest ray
   * @param a Ray
   * @param b Ray
   * @return The result of a*b, in ray
   **/
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0 || b == 0) {
      return 0;
    }

    require(a <= (type(uint256).max - halfRAY) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * b + halfRAY) / RAY;
  }

  /**
   * @dev Divides two ray, rounding half up to the nearest ray
   * @param a Ray
   * @param b Ray
   * @return The result of a/b, in ray
   **/
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfB = b / 2;

    require(a <= (type(uint256).max - halfB) / RAY, Errors.MATH_MULTIPLICATION_OVERFLOW);

    return (a * RAY + halfB) / b;
  }

  /**
   * @dev Casts ray down to wad
   * @param a Ray
   * @return a casted to wad, rounded half up to the nearest wad
   **/
  function rayToWad(uint256 a) internal pure returns (uint256) {
    uint256 halfRatio = WAD_RAY_RATIO / 2;
    uint256 result = halfRatio + a;
    require(result >= halfRatio, Errors.MATH_ADDITION_OVERFLOW);

    return result / WAD_RAY_RATIO;
  }

  /**
   * @dev Converts wad up to ray
   * @param a Wad
   * @return a converted in ray
   **/
  function wadToRay(uint256 a) internal pure returns (uint256) {
    uint256 result = a * WAD_RAY_RATIO;
    require(result / WAD_RAY_RATIO == a, Errors.MATH_MULTIPLICATION_OVERFLOW);
    return result;
  }
}

// SPDX-License-Identifier: agpl-3.0
// From commit https://github.com/aave/protocol-v2/commit/92a731ec2c536734924f5a55d3e6db0385b0c824
pragma solidity >=0.6.12;

import {Errors} from 'aave-address-book/AaveV2.sol';

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded half up
 **/

library PercentageMath {
  uint256 constant PERCENTAGE_FACTOR = 1e4; //percentage plus two decimals
  uint256 constant HALF_PERCENT = PERCENTAGE_FACTOR / 2;

  /**
   * @dev Executes a percentage multiplication
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return The percentage of value
   **/
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256) {
    if (value == 0 || percentage == 0) {
      return 0;
    }

    require(
      value <= (type(uint256).max - HALF_PERCENT) / percentage,
      Errors.MATH_MULTIPLICATION_OVERFLOW
    );

    return (value * percentage + HALF_PERCENT) / PERCENTAGE_FACTOR;
  }

  /**
   * @dev Executes a percentage division
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return The value divided the percentage
   **/
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256) {
    require(percentage != 0, Errors.MATH_DIVISION_BY_ZERO);
    uint256 halfPercentage = percentage / 2;

    require(
      value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR,
      Errors.MATH_MULTIPLICATION_OVERFLOW
    );

    return (value * PERCENTAGE_FACTOR + halfPercentage) / percentage;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;
pragma experimental ABIEncoderV2;

import {AggregatorInterface} from './common/AggregatorInterface.sol';

library DataTypes {
  // refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    uint40 lastUpdateTimestamp;
    //tokens addresses
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint8 id;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: Reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60-63: reserved
    //bit 64-79: reserve factor
    uint256 data;
  }

  struct UserConfigurationMap {
    uint256 data;
  }

  enum InterestRateMode {
    NONE,
    STABLE,
    VARIABLE
  }
}

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 * @dev Error messages prefix glossary:
 *  - VL = ValidationLogic
 *  - MATH = Math libraries
 *  - CT = Common errors between tokens (AToken, VariableDebtToken and StableDebtToken)
 *  - AT = AToken
 *  - SDT = StableDebtToken
 *  - VDT = VariableDebtToken
 *  - LP = LendingPool
 *  - LPAPR = LendingPoolAddressesProviderRegistry
 *  - LPC = LendingPoolConfiguration
 *  - RL = ReserveLogic
 *  - LPCM = LendingPoolCollateralManager
 *  - P = Pausable
 */
library Errors {
  //common errors
  string public constant CALLER_NOT_POOL_ADMIN = '33'; // 'The caller must be the pool admin'
  string public constant BORROW_ALLOWANCE_NOT_ENOUGH = '59'; // User borrows on behalf, but allowance are too small

  //contract specific errors
  string public constant VL_INVALID_AMOUNT = '1'; // 'Amount must be greater than 0'
  string public constant VL_NO_ACTIVE_RESERVE = '2'; // 'Action requires an active reserve'
  string public constant VL_RESERVE_FROZEN = '3'; // 'Action cannot be performed because the reserve is frozen'
  string public constant VL_CURRENT_AVAILABLE_LIQUIDITY_NOT_ENOUGH = '4'; // 'The current liquidity is not enough'
  string public constant VL_NOT_ENOUGH_AVAILABLE_USER_BALANCE = '5'; // 'User cannot withdraw more than the available balance'
  string public constant VL_TRANSFER_NOT_ALLOWED = '6'; // 'Transfer cannot be allowed.'
  string public constant VL_BORROWING_NOT_ENABLED = '7'; // 'Borrowing is not enabled'
  string public constant VL_INVALID_INTEREST_RATE_MODE_SELECTED = '8'; // 'Invalid interest rate mode selected'
  string public constant VL_COLLATERAL_BALANCE_IS_0 = '9'; // 'The collateral balance is 0'
  string public constant VL_HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '10'; // 'Health factor is lesser than the liquidation threshold'
  string public constant VL_COLLATERAL_CANNOT_COVER_NEW_BORROW = '11'; // 'There is not enough collateral to cover a new borrow'
  string public constant VL_STABLE_BORROWING_NOT_ENABLED = '12'; // stable borrowing not enabled
  string public constant VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY = '13'; // collateral is (mostly) the same currency that is being borrowed
  string public constant VL_AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '14'; // 'The requested amount is greater than the max loan size in stable rate mode
  string public constant VL_NO_DEBT_OF_SELECTED_TYPE = '15'; // 'for repayment of stable debt, the user needs to have stable debt, otherwise, he needs to have variable debt'
  string public constant VL_NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '16'; // 'To repay on behalf of an user an explicit amount to repay is needed'
  string public constant VL_NO_STABLE_RATE_LOAN_IN_RESERVE = '17'; // 'User does not have a stable rate loan in progress on this reserve'
  string public constant VL_NO_VARIABLE_RATE_LOAN_IN_RESERVE = '18'; // 'User does not have a variable rate loan in progress on this reserve'
  string public constant VL_UNDERLYING_BALANCE_NOT_GREATER_THAN_0 = '19'; // 'The underlying balance needs to be greater than 0'
  string public constant VL_DEPOSIT_ALREADY_IN_USE = '20'; // 'User deposit is already being used as collateral'
  string public constant LP_NOT_ENOUGH_STABLE_BORROW_BALANCE = '21'; // 'User does not have any stable rate loan for this reserve'
  string public constant LP_INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '22'; // 'Interest rate rebalance conditions were not met'
  string public constant LP_LIQUIDATION_CALL_FAILED = '23'; // 'Liquidation call failed'
  string public constant LP_NOT_ENOUGH_LIQUIDITY_TO_BORROW = '24'; // 'There is not enough liquidity available to borrow'
  string public constant LP_REQUESTED_AMOUNT_TOO_SMALL = '25'; // 'The requested amount is too small for a FlashLoan.'
  string public constant LP_INCONSISTENT_PROTOCOL_ACTUAL_BALANCE = '26'; // 'The actual balance of the protocol is inconsistent'
  string public constant LP_CALLER_NOT_LENDING_POOL_CONFIGURATOR = '27'; // 'The caller of the function is not the lending pool configurator'
  string public constant LP_INCONSISTENT_FLASHLOAN_PARAMS = '28';
  string public constant CT_CALLER_MUST_BE_LENDING_POOL = '29'; // 'The caller of this function must be a lending pool'
  string public constant CT_CANNOT_GIVE_ALLOWANCE_TO_HIMSELF = '30'; // 'User cannot give allowance to himself'
  string public constant CT_TRANSFER_AMOUNT_NOT_GT_0 = '31'; // 'Transferred amount needs to be greater than zero'
  string public constant RL_RESERVE_ALREADY_INITIALIZED = '32'; // 'Reserve has already been initialized'
  string public constant LPC_RESERVE_LIQUIDITY_NOT_0 = '34'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_ATOKEN_POOL_ADDRESS = '35'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_STABLE_DEBT_TOKEN_POOL_ADDRESS = '36'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_POOL_ADDRESS = '37'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_STABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '38'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '39'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_ADDRESSES_PROVIDER_ID = '40'; // 'The liquidity of the reserve needs to be 0'
  string public constant LPC_INVALID_CONFIGURATION = '75'; // 'Invalid risk parameters for the reserve'
  string public constant LPC_CALLER_NOT_EMERGENCY_ADMIN = '76'; // 'The caller must be the emergency admin'
  string public constant LPAPR_PROVIDER_NOT_REGISTERED = '41'; // 'Provider is not registered'
  string public constant LPCM_HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '42'; // 'Health factor is not below the threshold'
  string public constant LPCM_COLLATERAL_CANNOT_BE_LIQUIDATED = '43'; // 'The collateral chosen cannot be liquidated'
  string public constant LPCM_SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '44'; // 'User did not borrow the specified currency'
  string public constant LPCM_NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE = '45'; // "There isn't enough liquidity available to liquidate"
  string public constant LPCM_NO_ERRORS = '46'; // 'No errors'
  string public constant LP_INVALID_FLASHLOAN_MODE = '47'; //Invalid flashloan mode selected
  string public constant MATH_MULTIPLICATION_OVERFLOW = '48';
  string public constant MATH_ADDITION_OVERFLOW = '49';
  string public constant MATH_DIVISION_BY_ZERO = '50';
  string public constant RL_LIQUIDITY_INDEX_OVERFLOW = '51'; //  Liquidity index overflows uint128
  string public constant RL_VARIABLE_BORROW_INDEX_OVERFLOW = '52'; //  Variable borrow index overflows uint128
  string public constant RL_LIQUIDITY_RATE_OVERFLOW = '53'; //  Liquidity rate overflows uint128
  string public constant RL_VARIABLE_BORROW_RATE_OVERFLOW = '54'; //  Variable borrow rate overflows uint128
  string public constant RL_STABLE_BORROW_RATE_OVERFLOW = '55'; //  Stable borrow rate overflows uint128
  string public constant CT_INVALID_MINT_AMOUNT = '56'; //invalid amount to mint
  string public constant LP_FAILED_REPAY_WITH_COLLATERAL = '57';
  string public constant CT_INVALID_BURN_AMOUNT = '58'; //invalid amount to burn
  string public constant LP_FAILED_COLLATERAL_SWAP = '60';
  string public constant LP_INVALID_EQUAL_ASSETS_TO_SWAP = '61';
  string public constant LP_REENTRANCY_NOT_ALLOWED = '62';
  string public constant LP_CALLER_MUST_BE_AN_ATOKEN = '63';
  string public constant LP_IS_PAUSED = '64'; // 'Pool is paused'
  string public constant LP_NO_MORE_RESERVES_ALLOWED = '65';
  string public constant LP_INVALID_FLASH_LOAN_EXECUTOR_RETURN = '66';
  string public constant RC_INVALID_LTV = '67';
  string public constant RC_INVALID_LIQ_THRESHOLD = '68';
  string public constant RC_INVALID_LIQ_BONUS = '69';
  string public constant RC_INVALID_DECIMALS = '70';
  string public constant RC_INVALID_RESERVE_FACTOR = '71';
  string public constant LPAPR_INVALID_ADDRESSES_PROVIDER_ID = '72';
  string public constant VL_INCONSISTENT_FLASHLOAN_PARAMS = '73';
  string public constant LP_INCONSISTENT_PARAMS_LENGTH = '74';
  string public constant UL_INVALID_INDEX = '77';
  string public constant LP_NOT_CONTRACT = '78';
  string public constant SDT_STABLE_DEBT_OVERFLOW = '79';
  string public constant SDT_BURN_EXCEEDS_BALANCE = '80';

  enum CollateralManagerErrors {
    NO_ERROR,
    NO_COLLATERAL_AVAILABLE,
    COLLATERAL_CANNOT_BE_LIQUIDATED,
    CURRRENCY_NOT_BORROWED,
    HEALTH_FACTOR_ABOVE_THRESHOLD,
    NOT_ENOUGH_LIQUIDITY,
    NO_ACTIVE_RESERVE,
    HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD,
    INVALID_EQUAL_ASSETS_TO_SWAP,
    FROZEN_RESERVE
  }
}

library ConfiguratorInputTypes {
  struct InitReserveInput {
    address aTokenImpl;
    address stableDebtTokenImpl;
    address variableDebtTokenImpl;
    uint8 underlyingAssetDecimals;
    address interestRateStrategyAddress;
    address underlyingAsset;
    address treasury;
    address incentivesController;
    string underlyingAssetName;
    string aTokenName;
    string aTokenSymbol;
    string variableDebtTokenName;
    string variableDebtTokenSymbol;
    string stableDebtTokenName;
    string stableDebtTokenSymbol;
    bytes params;
  }

  struct UpdateATokenInput {
    address asset;
    address treasury;
    address incentivesController;
    string name;
    string symbol;
    address implementation;
    bytes params;
  }

  struct UpdateDebtTokenInput {
    address asset;
    address incentivesController;
    string name;
    string symbol;
    address implementation;
    bytes params;
  }
}

interface ILendingPoolAddressesProvider {
  event MarketIdSet(string newMarketId);
  event LendingPoolUpdated(address indexed newAddress);
  event ConfigurationAdminUpdated(address indexed newAddress);
  event EmergencyAdminUpdated(address indexed newAddress);
  event LendingPoolConfiguratorUpdated(address indexed newAddress);
  event LendingPoolCollateralManagerUpdated(address indexed newAddress);
  event PriceOracleUpdated(address indexed newAddress);
  event LendingRateOracleUpdated(address indexed newAddress);
  event ProxyCreated(bytes32 id, address indexed newAddress);
  event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);

  function getMarketId() external view returns (string memory);

  function setMarketId(string calldata marketId) external;

  function setAddress(bytes32 id, address newAddress) external;

  function setAddressAsProxy(bytes32 id, address impl) external;

  function getAddress(bytes32 id) external view returns (address);

  function getLendingPool() external view returns (address);

  function setLendingPoolImpl(address pool) external;

  function getLendingPoolConfigurator() external view returns (address);

  function setLendingPoolConfiguratorImpl(address configurator) external;

  function getLendingPoolCollateralManager() external view returns (address);

  function setLendingPoolCollateralManager(address manager) external;

  function getPoolAdmin() external view returns (address);

  function setPoolAdmin(address admin) external;

  function getEmergencyAdmin() external view returns (address);

  function setEmergencyAdmin(address admin) external;

  function getPriceOracle() external view returns (address);

  function setPriceOracle(address priceOracle) external;

  function getLendingRateOracle() external view returns (address);

  function setLendingRateOracle(address lendingRateOracle) external;
}

interface ILendingPool {
  /**
   * @dev Emitted on deposit()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the deposit
   * @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
   * @param amount The amount deposited
   * @param referral The referral code used
   **/
  event Deposit(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlyng asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to Address that will receive the underlying
   * @param amount The amount to be withdrawn
   **/
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed
   * @param referral The referral code used
   **/
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint256 borrowRateMode,
    uint256 borrowRate,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   **/
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param rateMode The rate mode that the user wants to swap to
   **/
  event Swap(address indexed reserve, address indexed user, uint256 rateMode);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   **/
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   **/
  event FlashLoan(
    address indexed target,
    address indexed initiator,
    address indexed asset,
    uint256 amount,
    uint256 premium,
    uint16 referralCode
  );

  /**
   * @dev Emitted when the pause is triggered.
   */
  event Paused();

  /**
   * @dev Emitted when the pause is lifted.
   */
  event Unpaused();

  /**
   * @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
   * LendingPoolCollateral manager using a DELEGATECALL
   * This allows to have the events in the generated ABI for LendingPool.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
   * in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
   * the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
   * gets added to the LendingPool ABI
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The new liquidity rate
   * @param stableBorrowRate The new stable borrow rate
   * @param variableBorrowRate The new variable borrow rate
   * @param liquidityIndex The new liquidity index
   * @param variableBorrowIndex The new variable borrow index
   **/
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User deposits 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to deposit
   * @param amount The amount to be deposited
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to Address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   **/
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already deposited enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   **/
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   **/
  function repay(
    address asset,
    uint256 amount,
    uint256 rateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
   * @param asset The address of the underlying asset borrowed
   * @param rateMode The rate mode that the user wants to swap to
   **/
  function swapBorrowRateMode(address asset, uint256 rateMode) external;

  /**
   * @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
   *        borrowed at a stable rate and depositors are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   **/
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @dev Allows depositors to enable/disable a specific deposited asset as collateral
   * @param asset The address of the underlying asset deposited
   * @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
   **/
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
   * For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts amounts being flash-borrowed
   * @param modes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata modes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @dev Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralETH the total collateral in ETH of the user
   * @return totalDebtETH the total debt in ETH of the user
   * @return availableBorrowsETH the borrowing power left of the user
   * @return currentLiquidationThreshold the liquidation threshold of the user
   * @return ltv the loan to value of the user
   * @return healthFactor the current health factor of the user
   **/
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralETH,
      uint256 totalDebtETH,
      uint256 availableBorrowsETH,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  function initReserve(
    address reserve,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  function setReserveInterestRateStrategyAddress(
    address reserve,
    address rateStrategyAddress
  ) external;

  function setConfiguration(address reserve, uint256 configuration) external;

  /**
   * @dev Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   **/
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @dev Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   **/
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @dev Returns the normalized income normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @dev Returns the normalized variable debt per unit of asset
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @dev Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state of the reserve
   **/
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromAfter,
    uint256 balanceToBefore
  ) external;

  function getReservesList() external view returns (address[] memory);

  function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);

  function setPause(bool val) external;

  function paused() external view returns (bool);
}

interface ILendingPoolConfigurator {
  /**
   * @dev Emitted when a reserve is initialized.
   * @param asset The address of the underlying asset of the reserve
   * @param aToken The address of the associated aToken contract
   * @param stableDebtToken The address of the associated stable rate debt token
   * @param variableDebtToken The address of the associated variable rate debt token
   * @param interestRateStrategyAddress The address of the interest rate strategy for the reserve
   **/
  event ReserveInitialized(
    address indexed asset,
    address indexed aToken,
    address stableDebtToken,
    address variableDebtToken,
    address interestRateStrategyAddress
  );

  /**
   * @dev Emitted when borrowing is enabled on a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param stableRateEnabled True if stable rate borrowing is enabled, false otherwise
   **/
  event BorrowingEnabledOnReserve(address indexed asset, bool stableRateEnabled);

  /**
   * @dev Emitted when borrowing is disabled on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  event BorrowingDisabledOnReserve(address indexed asset);

  /**
   * @dev Emitted when the collateralization risk parameters for the specified asset are updated.
   * @param asset The address of the underlying asset of the reserve
   * @param ltv The loan to value of the asset when used as collateral
   * @param liquidationThreshold The threshold at which loans using this asset as collateral will be considered undercollateralized
   * @param liquidationBonus The bonus liquidators receive to liquidate this asset
   **/
  event CollateralConfigurationChanged(
    address indexed asset,
    uint256 ltv,
    uint256 liquidationThreshold,
    uint256 liquidationBonus
  );

  /**
   * @dev Emitted when stable rate borrowing is enabled on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  event StableRateEnabledOnReserve(address indexed asset);

  /**
   * @dev Emitted when stable rate borrowing is disabled on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  event StableRateDisabledOnReserve(address indexed asset);

  /**
   * @dev Emitted when a reserve is activated
   * @param asset The address of the underlying asset of the reserve
   **/
  event ReserveActivated(address indexed asset);

  /**
   * @dev Emitted when a reserve is deactivated
   * @param asset The address of the underlying asset of the reserve
   **/
  event ReserveDeactivated(address indexed asset);

  /**
   * @dev Emitted when a reserve is frozen
   * @param asset The address of the underlying asset of the reserve
   **/
  event ReserveFrozen(address indexed asset);

  /**
   * @dev Emitted when a reserve is unfrozen
   * @param asset The address of the underlying asset of the reserve
   **/
  event ReserveUnfrozen(address indexed asset);

  /**
   * @dev Emitted when a reserve factor is updated
   * @param asset The address of the underlying asset of the reserve
   * @param factor The new reserve factor
   **/
  event ReserveFactorChanged(address indexed asset, uint256 factor);

  /**
   * @dev Emitted when the reserve decimals are updated
   * @param asset The address of the underlying asset of the reserve
   * @param decimals The new decimals
   **/
  event ReserveDecimalsChanged(address indexed asset, uint256 decimals);

  /**
   * @dev Emitted when a reserve interest strategy contract is updated
   * @param asset The address of the underlying asset of the reserve
   * @param strategy The new address of the interest strategy contract
   **/
  event ReserveInterestRateStrategyChanged(address indexed asset, address strategy);

  /**
   * @dev Emitted when an aToken implementation is upgraded
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The aToken proxy address
   * @param implementation The new aToken implementation
   **/
  event ATokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Emitted when the implementation of a stable debt token is upgraded
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The stable debt token proxy address
   * @param implementation The new aToken implementation
   **/
  event StableDebtTokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Emitted when the implementation of a variable debt token is upgraded
   * @param asset The address of the underlying asset of the reserve
   * @param proxy The variable debt token proxy address
   * @param implementation The new aToken implementation
   **/
  event VariableDebtTokenUpgraded(
    address indexed asset,
    address indexed proxy,
    address indexed implementation
  );

  /**
   * @dev Initializes a reserve
   * @param aTokenImpl  The address of the aToken contract implementation
   * @param stableDebtTokenImpl The address of the stable debt token contract
   * @param variableDebtTokenImpl The address of the variable debt token contract
   * @param underlyingAssetDecimals The decimals of the reserve underlying asset
   * @param interestRateStrategyAddress The address of the interest rate strategy contract for this reserve
   **/
  function initReserve(
    address aTokenImpl,
    address stableDebtTokenImpl,
    address variableDebtTokenImpl,
    uint8 underlyingAssetDecimals,
    address interestRateStrategyAddress
  ) external;

  function batchInitReserve(ConfiguratorInputTypes.InitReserveInput[] calldata input) external;

  /**
   * @dev Updates the aToken implementation for the reserve
   * @param asset The address of the underlying asset of the reserve to be updated
   * @param implementation The address of the new aToken implementation
   **/
  function updateAToken(address asset, address implementation) external;

  /**
   * @dev Updates the stable debt token implementation for the reserve
   * @param asset The address of the underlying asset of the reserve to be updated
   * @param implementation The address of the new aToken implementation
   **/
  function updateStableDebtToken(address asset, address implementation) external;

  /**
   * @dev Updates the variable debt token implementation for the asset
   * @param asset The address of the underlying asset of the reserve to be updated
   * @param implementation The address of the new aToken implementation
   **/
  function updateVariableDebtToken(address asset, address implementation) external;

  /**
   * @dev Enables borrowing on a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param stableBorrowRateEnabled True if stable borrow rate needs to be enabled by default on this reserve
   **/
  function enableBorrowingOnReserve(address asset, bool stableBorrowRateEnabled) external;

  /**
   * @dev Disables borrowing on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function disableBorrowingOnReserve(address asset) external;

  /**
   * @dev Configures the reserve collateralization parameters
   * all the values are expressed in percentages with two decimals of precision. A valid value is 10000, which means 100.00%
   * @param asset The address of the underlying asset of the reserve
   * @param ltv The loan to value of the asset when used as collateral
   * @param liquidationThreshold The threshold at which loans using this asset as collateral will be considered undercollateralized
   * @param liquidationBonus The bonus liquidators receive to liquidate this asset. The values is always above 100%. A value of 105%
   * means the liquidator will receive a 5% bonus
   **/
  function configureReserveAsCollateral(
    address asset,
    uint256 ltv,
    uint256 liquidationThreshold,
    uint256 liquidationBonus
  ) external;

  /**
   * @dev Enable stable rate borrowing on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function enableReserveStableRate(address asset) external;

  /**
   * @dev Disable stable rate borrowing on a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function disableReserveStableRate(address asset) external;

  /**
   * @dev Activates a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function activateReserve(address asset) external;

  /**
   * @dev Deactivates a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function deactivateReserve(address asset) external;

  /**
   * @dev Freezes a reserve. A frozen reserve doesn't allow any new deposit, borrow or rate swap
   *  but allows repayments, liquidations, rate rebalances and withdrawals
   * @param asset The address of the underlying asset of the reserve
   **/
  function freezeReserve(address asset) external;

  /**
   * @dev Unfreezes a reserve
   * @param asset The address of the underlying asset of the reserve
   **/
  function unfreezeReserve(address asset) external;

  /**
   * @dev Updates the reserve factor of a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param reserveFactor The new reserve factor of the reserve
   **/
  function setReserveFactor(address asset, uint256 reserveFactor) external;

  /**
   * @dev Sets the interest rate strategy of a reserve
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The new address of the interest strategy contract
   **/
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @dev pauses or unpauses all the actions of the protocol, including aToken transfers
   * @param val true if protocol needs to be paused, false otherwise
   **/
  function setPoolPause(bool val) external;
}

interface IAaveOracle {
  event WethSet(address indexed weth);
  event AssetSourceUpdated(address indexed asset, address indexed source);
  event FallbackOracleUpdated(address indexed fallbackOracle);

  /// @notice Returns the WETH address (reference asset of the oracle)
  function WETH() external returns (address);

  /// @notice External function called by the Aave governance to set or replace sources of assets
  /// @param assets The addresses of the assets
  /// @param sources The address of the source of each asset
  function setAssetSources(address[] calldata assets, address[] calldata sources) external;

  /// @notice Sets the fallbackOracle
  /// - Callable only by the Aave governance
  /// @param fallbackOracle The address of the fallbackOracle
  function setFallbackOracle(address fallbackOracle) external;

  /// @notice Gets an asset price by address
  /// @param asset The asset address
  function getAssetPrice(address asset) external view returns (uint256);

  /// @notice Gets a list of prices from a list of assets addresses
  /// @param assets The list of assets addresses
  function getAssetsPrices(address[] calldata assets) external view returns (uint256[] memory);

  /// @notice Gets the address of the source for an asset address
  /// @param asset The address of the asset
  /// @return address The address of the source
  function getSourceOfAsset(address asset) external view returns (address);

  /// @notice Gets the address of the fallback oracle
  /// @return address The address of the fallback oracle
  function getFallbackOracle() external view returns (address);
}

struct TokenData {
  string symbol;
  address tokenAddress;
}

// TODO: incomplete interface
interface IAaveProtocolDataProvider {
  function getReserveConfigurationData(
    address asset
  )
    external
    view
    returns (
      uint256 decimals,
      uint256 ltv,
      uint256 liquidationThreshold,
      uint256 liquidationBonus,
      uint256 reserveFactor,
      bool usageAsCollateralEnabled,
      bool borrowingEnabled,
      bool stableBorrowRateEnabled,
      bool isActive,
      bool isFrozen
    );

  function getAllReservesTokens() external view returns (TokenData[] memory);

  function getReserveTokensAddresses(
    address asset
  )
    external
    view
    returns (
      address aTokenAddress,
      address stableDebtTokenAddress,
      address variableDebtTokenAddress
    );

  function getUserReserveData(
    address asset,
    address user
  )
    external
    view
    returns (
      uint256 currentATokenBalance,
      uint256 currentStableDebt,
      uint256 currentVariableDebt,
      uint256 principalStableDebt,
      uint256 scaledVariableDebt,
      uint256 stableBorrowRate,
      uint256 liquidityRate,
      uint40 stableRateLastUpdated,
      bool usageAsCollateralEnabled
    );
}

interface ILendingRateOracle {
  /**
    @dev returns the market borrow rate in ray
    **/
  function getMarketBorrowRate(address asset) external view returns (uint256);

  /**
    @dev sets the market borrow rate. Rate value must be in ray
    **/
  function setMarketBorrowRate(address asset, uint256 rate) external;
}

interface IDefaultInterestRateStrategy {
  function EXCESS_UTILIZATION_RATE() external view returns (uint256);

  function OPTIMAL_UTILIZATION_RATE() external view returns (uint256);

  function addressesProvider() external view returns (address);

  function baseVariableBorrowRate() external view returns (uint256);

  function calculateInterestRates(
    address reserve,
    uint256 availableLiquidity,
    uint256 totalStableDebt,
    uint256 totalVariableDebt,
    uint256 averageStableBorrowRate,
    uint256 reserveFactor
  ) external view returns (uint256, uint256, uint256);

  function getMaxVariableBorrowRate() external view returns (uint256);

  function stableRateSlope1() external view returns (uint256);

  function stableRateSlope2() external view returns (uint256);

  function variableRateSlope1() external view returns (uint256);

  function variableRateSlope2() external view returns (uint256);
}

interface IATokenV2 {
  /**
   * @dev Emitted after the mint action
   * @param from The address performing the mint
   * @param value The amount being
   * @param index The new liquidity index of the reserve
   **/
  event Mint(address indexed from, uint256 value, uint256 index);

  /**
   * @dev Emitted after aTokens are burned
   * @param from The owner of the aTokens, getting them burned
   * @param target The address that will receive the underlying
   * @param value The amount being burned
   * @param index The new liquidity index of the reserve
   **/
  event Burn(address indexed from, address indexed target, uint256 value, uint256 index);

  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The amount being transferred
   * @param index The new liquidity index of the reserve
   **/
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @dev Mints `amount` aTokens to `user`
   * @param user The address receiving the minted tokens
   * @param amount The amount of tokens getting minted
   * @param index The new liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(address user, uint256 amount, uint256 index) external returns (bool);

  /**
   * @dev Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @param user The owner of the aTokens, getting them burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The new liquidity index of the reserve
   **/
  function burn(address user, address receiverOfUnderlying, uint256 amount, uint256 index) external;

  /**
   * @dev Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The new liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @dev Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   **/
  function transferOnLiquidation(address from, address to, uint256 value) external;

  /**
   * @dev Transfers the underlying asset to `target`. Used by the LendingPool to transfer
   * assets in borrow(), withdraw() and flashLoan()
   * @param user The recipient of the underlying
   * @param amount The amount getting transferred
   * @return The amount transferred
   **/
  function transferUnderlyingTo(address user, uint256 amount) external returns (uint256);

  /**
   * @dev Invoked to execute actions on the aToken side after a repayment.
   * @param user The user executing the repayment
   * @param amount The amount getting repaid
   **/
  function handleRepayment(address user, uint256 amount) external;

  /**
   * @dev Returns the nonce of the given user.
   * @param user The user to fetch the nonce for.
   */
  function _nonces(address user) external view returns (uint256);

  /**
   * @dev Returns the address of the incentives controller contract
   **/
  function getIncentivesController() external view returns (IAaveIncentivesController);

  /**
   * @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   **/
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}

interface IAaveIncentivesController {
  event RewardsAccrued(address indexed user, uint256 amount);

  event RewardsClaimed(address indexed user, address indexed to, uint256 amount);

  event RewardsClaimed(
    address indexed user,
    address indexed to,
    address indexed claimer,
    uint256 amount
  );

  event ClaimerSet(address indexed user, address indexed claimer);

  /*
   * @dev Returns the configuration of the distribution for a certain asset
   * @param asset The address of the reference asset of the distribution
   * @return The asset index, the emission per second and the last updated timestamp
   **/
  function getAssetData(address asset) external view returns (uint256, uint256, uint256);

  /*
   * LEGACY **************************
   * @dev Returns the configuration of the distribution for a certain asset
   * @param asset The address of the reference asset of the distribution
   * @return The asset index, the emission per second and the last updated timestamp
   **/
  function assets(address asset) external view returns (uint128, uint128, uint256);

  /**
   * @dev Whitelists an address to claim the rewards on behalf of another address
   * @param user The address of the user
   * @param claimer The address of the claimer
   */
  function setClaimer(address user, address claimer) external;

  /**
   * @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
   * @param user The address of the user
   * @return The claimer address
   */
  function getClaimer(address user) external view returns (address);

  /**
   * @dev Configure assets for a certain rewards emission
   * @param assets The assets to incentivize
   * @param emissionsPerSecond The emission for each asset
   */
  function configureAssets(
    address[] calldata assets,
    uint256[] calldata emissionsPerSecond
  ) external;

  /**
   * @dev Called by the corresponding asset on any update that affects the rewards distribution
   * @param asset The address of the user
   * @param userBalance The balance of the user of the asset in the lending pool
   * @param totalSupply The total supply of the asset in the lending pool
   **/
  function handleAction(address asset, uint256 userBalance, uint256 totalSupply) external;

  /**
   * @dev Returns the total of rewards of an user, already accrued + not yet accrued
   * @param user The address of the user
   * @return The rewards
   **/
  function getRewardsBalance(
    address[] calldata assets,
    address user
  ) external view returns (uint256);

  /**
   * @dev Claims reward for an user, on all the assets of the lending pool, accumulating the pending rewards
   * @param amount Amount of rewards to claim
   * @param to Address that will be receiving the rewards
   * @return Rewards claimed
   **/
  function claimRewards(
    address[] calldata assets,
    uint256 amount,
    address to
  ) external returns (uint256);

  /**
   * @dev Claims reward for an user on behalf, on all the assets of the lending pool, accumulating the pending rewards. The caller must
   * be whitelisted via "allowClaimOnBehalf" function by the RewardsAdmin role manager
   * @param amount Amount of rewards to claim
   * @param user Address to check and claim rewards
   * @param to Address that will be receiving the rewards
   * @return Rewards claimed
   **/
  function claimRewardsOnBehalf(
    address[] calldata assets,
    uint256 amount,
    address user,
    address to
  ) external returns (uint256);

  /**
   * @dev returns the unclaimed rewards of the user
   * @param user the address of the user
   * @return the unclaimed user rewards
   */
  function getUserUnclaimedRewards(address user) external view returns (uint256);

  /**
   * @dev returns the unclaimed rewards of the user
   * @param user the address of the user
   * @param asset The asset to incentivize
   * @return the user index for the asset
   */
  function getUserAssetData(address user, address asset) external view returns (uint256);

  /**
   * @dev for backward compatibility with previous implementation of the Incentives controller
   */
  function REWARD_TOKEN() external view returns (address);

  /**
   * @dev for backward compatibility with previous implementation of the Incentives controller
   */
  function PRECISION() external view returns (uint8);

  /**
   * @dev Gets the distribution end timestamp of the emissions
   */
  function DISTRIBUTION_END() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
// From commit https://github.com/OpenZeppelin/openzeppelin-contracts/commit/a035b235b4f2c9af4ba88edc4447f02e37f8d124

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;

interface AggregatorInterface {
  function latestAnswer() external view returns (int256);

  function latestTimestamp() external view returns (uint256);

  function latestRound() external view returns (uint256);

  function getAnswer(uint256 roundId) external view returns (int256);

  function getTimestamp(uint256 roundId) external view returns (uint256);

  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);

  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}

{
  "remappings": [
    "aave-address-book/=lib/aave-address-book/src/",
    "aave-v3-origin/=lib/aave-address-book/lib/aave-v3-origin/src/",
    "aave-v3-core/=lib/aave-address-book/lib/aave-v3-origin/src/core/",
    "aave-v3-periphery/=lib/aave-address-book/lib/aave-v3-origin/src/periphery/",
    "forge-std/=lib/forge-std/src/",
    "solidity-utils/=lib/solidity-utils/src/",
    "@openzeppelin/contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/solidity-utils/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "openzeppelin-contracts-upgradeable/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract ILendingPoolAddressesProvider","name":"provider","type":"address"},{"internalType":"uint256","name":"optimalUtilizationRate_","type":"uint256"},{"internalType":"uint256","name":"baseVariableBorrowRate_","type":"uint256"},{"internalType":"uint256","name":"variableRateSlope1_","type":"uint256"},{"internalType":"uint256","name":"variableRateSlope2_","type":"uint256"},{"internalType":"uint256","name":"stableRateSlope1_","type":"uint256"},{"internalType":"uint256","name":"stableRateSlope2_","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"EXCESS_UTILIZATION_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OPTIMAL_UTILIZATION_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"addressesProvider","outputs":[{"internalType":"contract ILendingPoolAddressesProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"},{"internalType":"address","name":"aToken","type":"address"},{"internalType":"uint256","name":"liquidityAdded","type":"uint256"},{"internalType":"uint256","name":"liquidityTaken","type":"uint256"},{"internalType":"uint256","name":"totalStableDebt","type":"uint256"},{"internalType":"uint256","name":"totalVariableDebt","type":"uint256"},{"internalType":"uint256","name":"averageStableBorrowRate","type":"uint256"},{"internalType":"uint256","name":"reserveFactor","type":"uint256"}],"name":"calculateInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"},{"internalType":"uint256","name":"availableLiquidity","type":"uint256"},{"internalType":"uint256","name":"totalStableDebt","type":"uint256"},{"internalType":"uint256","name":"totalVariableDebt","type":"uint256"},{"internalType":"uint256","name":"averageStableBorrowRate","type":"uint256"},{"internalType":"uint256","name":"reserveFactor","type":"uint256"}],"name":"calculateInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getMaxVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stableRateSlope1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stableRateSlope2","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"variableRateSlope1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"variableRateSlope2","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

0x608060405234801561001057600080fd5b50600436106100a95760003560e01c806380031e371161007157806380031e37146101845780639584df281461018c578063a15f30ac1461019f578063b2589544146101c6578063c72c4d10146101ec578063ccab01a31461022b57600080fd5b80630bdf953f146100ae57806317319873146100e357806329db497d1461010a57806365614f81146101385780637b832f581461015e575b600080fd5b7f000000000000000000000000000000000000000000108b2a2c280290940000005b6040519081526020015b60405180910390f35b6100d07f00000000000000000000000000000000000000000052b7d2dcc80cd2e400000081565b61011d610118366004610ba7565b610251565b604080519384526020840192909252908201526060016100da565b7f000000000000000000000000000000000000000001f04ef12cb04cf1580000006100d0565b7f0000000000000000000000000000000000000000004a723dc6b40b8a9a0000006100d0565b6100d06102ff565b61011d61019a366004610c12565b61037a565b6100d07f000000000000000000000000000000000000000002e87669c308736a0400000081565b7f00000000000000000000000000000000000000000000000000000000000000006100d0565b6102137f000000000000000000000000b53c1a33016b2dc2ff3653530bff1848a515c8c581565b6040516001600160a01b0390911681526020016100da565b7f000000000000000000000000000000000000000001f04ef12cb04cf1580000006100d0565b6040516370a0823160e01b81526001600160a01b0388811660048301526000918291829182918d16906370a0823190602401602060405180830381865afa1580156102a0573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906102c49190610c5e565b90506102da896102d4838d6107b9565b90610826565b90506102ea8c828a8a8a8a61037a565b93509350935050985098509895505050505050565b60006103757f000000000000000000000000000000000000000001f04ef12cb04cf15800000061036f7f00000000000000000000000000000000000000000000000000000000000000007f0000000000000000000000000000000000000000004a723dc6b40b8a9a0000006107b9565b906107b9565b905090565b60008060006103b16040518060a0016040528060008152602001600081526020016000815260200160008152602001600081525090565b6103bb88886107b9565b808252600060208301819052604083018190526060830152156103f65780516103f1906103e9908b906107b9565b825190610868565b6103f9565b60005b8160800181815250507f000000000000000000000000b53c1a33016b2dc2ff3653530bff1848a515c8c56001600160a01b0316633618abba6040518163ffffffff1660e01b8152600401602060405180830381865afa158015610460573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906104849190610c77565b60405163bb85c0bb60e01b81526001600160a01b038c81166004830152919091169063bb85c0bb90602401602060405180830381865afa1580156104cc573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906104f09190610c5e565b604082015260808101517f000000000000000000000000000000000000000002e87669c308736a0400000010156106695760006105847f00000000000000000000000000000000000000000052b7d2dcc80cd2e400000061057e7f000000000000000000000000000000000000000002e87669c308736a04000000856080015161082690919063ffffffff16565b90610868565b90506105e26105b37f000000000000000000000000000000000000000001f04ef12cb04cf15800000083610946565b604084015161036f907f000000000000000000000000000000000000000000108b2a2c280290940000006107b9565b604083015261065e6106147f000000000000000000000000000000000000000001f04ef12cb04cf15800000083610946565b61036f7f00000000000000000000000000000000000000000000000000000000000000007f0000000000000000000000000000000000000000004a723dc6b40b8a9a0000006107b9565b602083015250610763565b6106d86106cd6106a67f000000000000000000000000000000000000000002e87669c308736a04000000846080015161086890919063ffffffff16565b7f000000000000000000000000000000000000000000108b2a2c2802909400000090610946565b6040830151906107b9565b6040820152608081015161075d90610736907f000000000000000000000000000000000000000002e87669c308736a040000009061057e907f0000000000000000000000000000000000000000004a723dc6b40b8a9a000000610946565b7f0000000000000000000000000000000000000000000000000000000000000000906107b9565b60208201525b61079661077261271087610826565b610790836080015161078a8c8c87602001518d610a01565b90610946565b90610a69565b606082018190526040820151602090920151909b919a5098509650505050505050565b6000806107c68385610caa565b90508381101561081d5760405162461bcd60e51b815260206004820152601b60248201527f536166654d6174683a206164646974696f6e206f766572666c6f77000000000060448201526064015b60405180910390fd5b90505b92915050565b600061081d83836040518060400160405280601e81526020017f536166654d6174683a207375627472616374696f6e206f766572666c6f770000815250610af2565b604080518082019091526002815261035360f41b6020820152600090826108a25760405162461bcd60e51b81526004016108149190610cbd565b5060006108b0600284610d0b565b90506b033b2e3c9fd0803ce80000006108cb82600019610d2d565b6108d59190610d0b565b84111560405180604001604052806002815260200161068760f31b815250906109115760405162461bcd60e51b81526004016108149190610cbd565b50828161092a6b033b2e3c9fd0803ce800000087610d40565b6109349190610caa565b61093e9190610d0b565b949350505050565b6000821580610953575081155b1561096057506000610820565b8161097860026b033b2e3c9fd0803ce8000000610d0b565b61098490600019610d2d565b61098e9190610d0b565b83111560405180604001604052806002815260200161068760f31b815250906109ca5760405162461bcd60e51b81526004016108149190610cbd565b506b033b2e3c9fd0803ce80000006109e3600282610d0b565b6109ed8486610d40565b6109f79190610caa565b61081d9190610d0b565b600080610a0e86866107b9565b905080600003610a2257600091505061093e565b6000610a318561078a88610b2c565b90506000610a428561078a8a610b2c565b90506000610a5c610a5285610b2c565b61057e85856107b9565b9998505050505050505050565b6000821580610a76575081155b15610a8357506000610820565b81610a916002612710610d0b565b610a9d90600019610d2d565b610aa79190610d0b565b83111560405180604001604052806002815260200161068760f31b81525090610ae35760405162461bcd60e51b81526004016108149190610cbd565b506127106109e3600282610d0b565b60008184841115610b165760405162461bcd60e51b81526004016108149190610cbd565b506000610b238486610d2d565b95945050505050565b600080610b3d633b9aca0084610d40565b905082610b4e633b9aca0083610d0b565b1460405180604001604052806002815260200161068760f31b81525090610b885760405162461bcd60e51b81526004016108149190610cbd565b5092915050565b6001600160a01b0381168114610ba457600080fd5b50565b600080600080600080600080610100898b031215610bc457600080fd5b8835610bcf81610b8f565b97506020890135610bdf81610b8f565b979a9799505050506040860135956060810135956080820135955060a0820135945060c0820135935060e0909101359150565b60008060008060008060c08789031215610c2b57600080fd5b8635610c3681610b8f565b9860208801359850604088013597606081013597506080810135965060a00135945092505050565b600060208284031215610c7057600080fd5b5051919050565b600060208284031215610c8957600080fd5b815161081d81610b8f565b634e487b7160e01b600052601160045260246000fd5b8082018082111561082057610820610c94565b600060208083528351808285015260005b81811015610cea57858101830151858201604001528201610cce565b506000604082860101526040601f19601f8301168501019250505092915050565b600082610d2857634e487b7160e01b600052601260045260246000fd5b500490565b8181038181111561082057610820610c94565b808202811582820484141761082057610820610c9456fea2646970667358221220ba5b56d67f44f142b6a3b77229d0eff70dce35adb2ab0a278debb007773698fb64736f6c63430008130033