ETH Price: $2,672.40 (+0.14%)
Gas: 14 Gwei

Contract

0xcb474FbEc33Fbc4E96fc0149d991Fb3f85A54C98
 

Overview

ETH Balance

0 ETH

Eth Value

$0.00

Multichain Info

No addresses found
Transaction Hash
Method
Block
From
To

There are no matching entries

Please try again later

Latest 1 internal transaction

Advanced mode:
Parent Transaction Hash Block From To
137550952021-12-06 23:12:461058 days ago1638832366  Contract Creation0 ETH
Loading...
Loading

Minimal Proxy Contract for 0xbc20c6582259f440ae628819be80062a576f06ed

Contract Name:
ClaimableFundsSplitterV1

Compiler Version
v0.8.4+commit.c7e474f2

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license
/**
 *Submitted for verification at Etherscan.io on 2021-08-23
*/

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/security/ReentrancyGuard.sol



pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: contracts/collab/handlers/ICollabFundsHandler.sol



pragma solidity 0.8.4;

interface ICollabFundsHandler {

    function init(address[] calldata _recipients, uint256[] calldata _splits) external;

    function totalRecipients() external view returns (uint256);

    function shareAtIndex(uint256 index) external view returns (address _recipient, uint256 _split);
}

// File: contracts/collab/handlers/CollabFundsHandlerBase.sol



pragma solidity 0.8.4;


abstract contract CollabFundsHandlerBase is ICollabFundsHandler {

    /// @notice in line with EIP-2981 format - precision 100.00000%
    uint256 internal constant modulo = 100_00000;

    address[] public recipients;
    uint256[] public splits;

    bool internal locked = false;

    /**
     * @notice Using a minimal proxy contract pattern initialises the contract and sets delegation
     * @dev initialises the FundsReceiver (see https://eips.ethereum.org/EIPS/eip-1167)
     */
    function init(address[] calldata _recipients, uint256[] calldata _splits) override virtual external {
        require(!locked, "contract locked sorry");

        // Validate splits are correct
        uint256 total;
        for (uint256 i = 0; i < _splits.length; i++) {
            total = total + _splits[i];
        }
        require(total == modulo, "Shares dont not equal 100%");

        locked = true;
        recipients = _recipients;
        splits = _splits;
    }

    /// get the number of recipients this funds handler is configured for
    function totalRecipients() public override virtual view returns (uint256) {
        return recipients.length;
    }

    /// get the recipient and split at the given index of the shares list
    function shareAtIndex(uint256 _index) public override view returns (address recipient, uint256 split) {
        recipient = recipients[_index];
        split = splits[_index];
    }
}

// File: contracts/collab/handlers/ICollabFundsDrainable.sol



pragma solidity 0.8.4;


// Drain all funds for all parties
interface ICollabFundsDrainable {

    event FundsDrained(uint256 total, address[] recipients, uint256[] amounts, address erc20);

    function drain() external;

    function drainERC20(IERC20 token) external;
}

// Drain your specific share of funds only
interface ICollabFundsShareDrainable is ICollabFundsDrainable {
    function drainShare() external;

    function drainShareERC20(IERC20 token) external;
}

// File: contracts/collab/handlers/ClaimableFundsReceiverV1.sol



pragma solidity 0.8.4;






/// @title Allows funds to be received and then split later on using a pull pattern, holding a balance until drained.
/// @notice Supports claiming/draining all balances at one
/// @notice Doe not an individual shares
///
/// @author KnownOrigin Labs - https://knownorigin.io/
contract ClaimableFundsReceiverV1 is ReentrancyGuard, CollabFundsHandlerBase, ICollabFundsDrainable {

    // accept all funds
    receive() external virtual payable {
        // But do not do anything with them ... assuming all funds are drained manually
    }

    /// split current contract balance among recipients
    function drain() public nonReentrant override {

        // Check that there are funds to drain
        uint256 balance = address(this).balance;
        require(balance > 0, "No funds to drain");

        uint256[] memory shares = new uint256[](recipients.length);

        // Calculate and send share for each recipient
        uint256 singleUnitOfValue = balance / modulo;
        uint256 sumPaidOut;
        for (uint256 i = 0; i < recipients.length; i++) {
            shares[i] = singleUnitOfValue * splits[i];

            // Deal with the first recipient later (see comment below)
            if (i != 0) {
                payable(recipients[i]).call{value : shares[i]}("");
            }

            sumPaidOut += shares[i];
        }

        // The first recipient is a special address as it receives any dust left over from splitting up the funds
        uint256 remainingBalance = balance - sumPaidOut;
        // Either going to be a zero or non-zero value
        payable(recipients[0]).call{value : remainingBalance + shares[0]}("");

        emit FundsDrained(balance, recipients, shares, address(0));
    }

    /// split the current token balance among recipients
    function drainERC20(IERC20 token) public nonReentrant override {

        // Check that there are funds to drain
        uint256 balance = token.balanceOf(address(this));
        require(balance > 0, "No funds to drain");

        uint256[] memory shares = new uint256[](recipients.length);

        // Calculate and send share for each recipient
        uint256 singleUnitOfValue = balance / modulo;
        uint256 sumPaidOut;
        for (uint256 i = 0; i < recipients.length; i++) {
            shares[i] = singleUnitOfValue * splits[i];

            // Deal with the first recipient later (see comment below)
            if (i != 0) {
                token.transfer(recipients[i], shares[i]);
            }

            sumPaidOut += shares[i];
        }

        // The first recipient is a special address as it receives any dust left over from splitting up the funds
        uint256 remainingBalance = balance - sumPaidOut;
        // Either going to be a zero or non-zero value
        token.transfer(recipients[0], remainingBalance + shares[0]);

        emit FundsDrained(balance, recipients, shares, address(token));
    }

}

// File: contracts/collab/handlers/ClaimableFundsSplitterV1.sol



pragma solidity 0.8.4;







/// @title Allows funds to be split on receiving the funds
/// @notice This should not be used for large number of collaborators due to the potential of out of gas errors
///        when splitting between many participants when natively receiving ETH
///
/// @author KnownOrigin Labs - https://knownorigin.io/
contract ClaimableFundsSplitterV1 is ClaimableFundsReceiverV1 {

    // accept all funds and split
    receive() external override payable {
        drain();
    }

}

Contract ABI

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"total","type":"uint256"},{"indexed":false,"internalType":"address[]","name":"recipients","type":"address[]"},{"indexed":false,"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"indexed":false,"internalType":"address","name":"erc20","type":"address"}],"name":"FundsDrained","type":"event"},{"inputs":[],"name":"drain","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"drainERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"_recipients","type":"address[]"},{"internalType":"uint256[]","name":"_splits","type":"uint256[]"}],"name":"init","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"recipients","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_index","type":"uint256"}],"name":"shareAtIndex","outputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"split","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"splits","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalRecipients","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

Block Transaction Difficulty Gas Used Reward
View All Blocks Produced

Block Uncle Number Difficulty Gas Used Reward
View All Uncles
Loading...
Loading
Loading...
Loading

Validator Index Block Amount
View All Withdrawals

Transaction Hash Block Value Eth2 PubKey Valid
View All Deposits
Loading...
Loading
[ Download: CSV Export  ]

A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.