Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

import { Guild } from "./Guild.sol";

/// @title Staking contract for farming generic rewards in return for staking a whitelisted token(s)
/// @author BlockRocket.tech
/// @dev Fork of MasterChef.sol from SushiSwap
/// @dev Only the owner can add new pools
contract LaunchPoolStakingWithGuild is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    /// @dev Details about each user in a pool
    struct UserInfo {
        uint256 amount;     // How many tokens the user has provided to a pool
        uint256 rewardDebt; // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of reward tokens
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accRewardPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws ERC20 tokens to a pool. Here's what happens:
        //   1. The pool's `accRewardPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    /// @dev Info of each pool.
    struct PoolInfo {
        IERC20 erc20Token; // Address of token contract.
        uint256 allocPoint; // How many allocation points assigned to this pool; this is a weighting for rewards.
        uint256 lastRewardBlock; // Last block number that reward token distribution has occurred up to endBlock.
        uint256 accRewardPerShare; // Per LP token staked, how much reward token earned in pool that users will get
        uint256 maxStakingAmountPerUser; // Max. amount of tokens that can be staked per account/user
    }

    /// @dev Container for holding all rewards
    Guild public rewardGuildBank;

    /// @dev Number of reward tokens distributed per block, across all pools.
    uint256 public rewardPerBlock;

    /// @dev The total amount of reward token available for farming across all pools between start and end block.
    uint256 public maxRewardTokenAvailableForFarming;

    /// @dev List of pools that users can stake into
    PoolInfo[] public poolInfo;

    /// @dev Per pool, info of each user that stakes ERC20 tokens.
    /// @dev Pool ID => User Address => User Info
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;

    /// @dev Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint;

    /// @dev The block number when rewards starts across all pools.
    uint256 public startBlock;

    /// @dev The block number when rewards ends.
    uint256 public endBlock;

    /// @dev Tracks ERC20 tokens added by owner
    mapping(address => bool) isErc20TokenWhitelisted;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);

    /// @param _rewardToken Address of the reward token
    /// @param _maxRewardTokenAvailableForFarming Maximum number of reward token that will be distributed between the start and end of farming
    /// @param _startBlock Block number when farming will begin for all pools
    /// @param _endBlock Block number when farming will end for all pools
    constructor(
        IERC20 _rewardToken,
        uint256 _maxRewardTokenAvailableForFarming,
        uint256 _startBlock,
        uint256 _endBlock
    ) public {
        require(address(_rewardToken) != address(0), "constructor: _rewardToken must not be zero address");
        require(_maxRewardTokenAvailableForFarming > 0, "constructor: _maxRewardTokenAvailableForFarming must be greater than zero");

        maxRewardTokenAvailableForFarming = _maxRewardTokenAvailableForFarming;
        startBlock = _startBlock;
        endBlock = _endBlock;

        uint256 numberOfBlocksForFarming = endBlock.sub(startBlock);
        rewardPerBlock = maxRewardTokenAvailableForFarming.div(numberOfBlocksForFarming);

        rewardGuildBank = new Guild(IERC20(address(_rewardToken)), address(this));
    }

    /// @dev Returns the number of pools that have been added by the owner
    /// @return Number of pools
    function numberOfPools() external view returns (uint256) {
        return poolInfo.length;
    }

    /// @dev Create a new reward pool by whitelisting a new ERC20 token.
    /// @dev Can only be called by the contract owner
    /// @param _allocPoint Governs what percentage of the total rewards this pool and other pools will get
    /// @param _erc20Token Address of the staking token being whitelisted
    /// @param _maxStakingAmountPerUser For this pool, maximum amount per user that can be staked
    /// @param _withUpdate Set to true for updating all pools before adding this one
    function add(uint256 _allocPoint, IERC20 _erc20Token, uint256 _maxStakingAmountPerUser, bool _withUpdate) public onlyOwner {
        require(block.number < endBlock, "add: must be before end");
        address erc20TokenAddress = address(_erc20Token);
        require(erc20TokenAddress != address(0), "add: _erc20Token must not be zero address");
        require(isErc20TokenWhitelisted[erc20TokenAddress] == false, "add: already whitelisted");
        require(_maxStakingAmountPerUser > 0, "add: _maxStakingAmountPerUser must be greater than zero");

        if (_withUpdate) {
            massUpdatePools();
        }

        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(PoolInfo({
            erc20Token : _erc20Token,
            allocPoint : _allocPoint,
            lastRewardBlock : lastRewardBlock,
            accRewardPerShare : 0,
            maxStakingAmountPerUser: _maxStakingAmountPerUser
        }));

        isErc20TokenWhitelisted[erc20TokenAddress] = true;
    }

    /// @dev Update a pool's allocation point to increase or decrease its share of contract-level rewards
    /// @dev Can also update the max amount that can be staked per user
    /// @dev Can only be called by the owner
    /// @param _pid ID of the pool being updated
    /// @param _allocPoint New allocation point
    /// @param _maxStakingAmountPerUser Maximum amount that a user can deposit into the far
    /// @param _withUpdate Set to true if you want to update all pools before making this change - it will checkpoint those rewards
    function set(uint256 _pid, uint256 _allocPoint, uint256 _maxStakingAmountPerUser, bool _withUpdate) public onlyOwner {
        require(block.number < endBlock, "set: must be before end");
        require(_pid < poolInfo.length, "set: invalid _pid");
        require(_maxStakingAmountPerUser > 0, "set: _maxStakingAmountPerUser must be greater than zero");

        if (_withUpdate) {
            massUpdatePools();
        }

        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);

        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].maxStakingAmountPerUser = _maxStakingAmountPerUser;
    }

    /// @dev View function to see pending and unclaimed reward tokens for a given user
    /// @param _pid ID of the pool where a user has a stake
    /// @param _user Account being queried
    /// @return Amount of reward tokens due to a user
    function pendingRewards(uint256 _pid, address _user) external view returns (uint256) {
        require(_pid < poolInfo.length, "pendingRewards: invalid _pid");

        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];

        uint256 accRewardPerShare = pool.accRewardPerShare;
        uint256 lpSupply = pool.erc20Token.balanceOf(address(this));

        if (block.number > pool.lastRewardBlock && lpSupply != 0) {
            uint256 maxEndBlock = block.number <= endBlock ? block.number : endBlock;
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, maxEndBlock);
            uint256 reward = multiplier.mul(rewardPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accRewardPerShare = accRewardPerShare.add(reward.mul(1e18).div(lpSupply));
        }

        return user.amount.mul(accRewardPerShare).div(1e18).sub(user.rewardDebt);
    }

    /// @dev Cycles through the pools to update all of the rewards accrued
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    /// @dev Updates a specific pool to track all of the rewards accrued up to the TX block
    /// @param _pid ID of the pool
    function updatePool(uint256 _pid) public {
        require(_pid < poolInfo.length, "updatePool: invalid _pid");

        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }

        uint256 erc20Supply = pool.erc20Token.balanceOf(address(this));
        if (erc20Supply == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }

        uint256 maxEndBlock = block.number <= endBlock ? block.number : endBlock;
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, maxEndBlock);

        // No point in doing any more logic as the rewards have ended
        if (multiplier == 0) {
            return;
        }

        uint256 reward = multiplier.mul(rewardPerBlock).mul(pool.allocPoint).div(totalAllocPoint);

        pool.accRewardPerShare = pool.accRewardPerShare.add(reward.mul(1e18).div(erc20Supply));
        pool.lastRewardBlock = maxEndBlock;
    }

    /// @dev Where any user can stake their ERC20 tokens into a pool in order to farm rewards
    /// @param _pid ID of the pool
    /// @param _amount Amount of ERC20 being staked
    function deposit(uint256 _pid, uint256 _amount) external {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];

        require(user.amount.add(_amount) <= pool.maxStakingAmountPerUser, "deposit: can not exceed max staking amount per user");

        updatePool(_pid);

        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accRewardPerShare).div(1e18).sub(user.rewardDebt);
            if (pending > 0) {
                safeRewardTransfer(msg.sender, pending);
            }
        }

        if (_amount > 0) {
            pool.erc20Token.safeTransferFrom(address(msg.sender), address(this), _amount);
            user.amount = user.amount.add(_amount);
        }

        user.rewardDebt = user.amount.mul(pool.accRewardPerShare).div(1e18);
        emit Deposit(msg.sender, _pid, _amount);
    }

    /// @dev Allows a user to withdraw any ERC20 tokens staked in a pool
    /// @dev Partial withdrawals permitted
    /// @param _pid Pool ID
    /// @param _amount Being withdrawn
    function withdraw(uint256 _pid, uint256 _amount) external {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];

        require(user.amount >= _amount, "withdraw: _amount not good");

        updatePool(_pid);

        uint256 pending = user.amount.mul(pool.accRewardPerShare).div(1e18).sub(user.rewardDebt);
        if (pending > 0) {
            safeRewardTransfer(msg.sender, pending);
        }

        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.erc20Token.safeTransfer(address(msg.sender), _amount);
        }

        user.rewardDebt = user.amount.mul(pool.accRewardPerShare).div(1e18);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    /// @dev Emergency only. Should the rewards issuance mechanism fail, people can still withdraw their stake
    /// @param _pid Pool ID
    function emergencyWithdraw(uint256 _pid) external {
        require(_pid < poolInfo.length, "updatePool: invalid _pid");

        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];

        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;

        pool.erc20Token.safeTransfer(address(msg.sender), amount);
        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    ////////////
    // Private /
    ////////////

    /// @dev Safe reward transfer function, just in case if rounding error causes pool to not have enough rewards.
    /// @param _to Whom to send reward into
    /// @param _amount of reward to send
    function safeRewardTransfer(address _to, uint256 _amount) private {
        uint256 bal = rewardGuildBank.tokenBalance();
        if (_amount > bal) {
            rewardGuildBank.withdrawTo(_to, bal);
        } else {
            rewardGuildBank.withdrawTo(_to, _amount);
        }
    }

    /// @dev Return reward multiplier over the given _from to _to block.
    /// @param _from Block number
    /// @param _to Block number
    /// @return Number of blocks that have passed
    function getMultiplier(uint256 _from, uint256 _to) private view returns (uint256) {
        return _to.sub(_from);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

contract Guild {
    using SafeERC20 for IERC20;

    IERC20 public token;

    address public stakingContract;

    constructor(IERC20 _token, address _stakingContract) public {
        token = _token;
        stakingContract = _stakingContract;
    }

    function withdrawTo(address _recipient, uint256 _amount) external {
        require(msg.sender == stakingContract, "Guild.withdrawTo: Only staking contract");
        token.safeTransfer(_recipient, _amount);
    }

    function tokenBalance() external returns (uint256) {
        return token.balanceOf(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IERC20","name":"_rewardToken","type":"address"},{"internalType":"uint256","name":"_maxRewardTokenAvailableForFarming","type":"uint256"},{"internalType":"uint256","name":"_startBlock","type":"uint256"},{"internalType":"uint256","name":"_endBlock","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_erc20Token","type":"address"},{"internalType":"uint256","name":"_maxStakingAmountPerUser","type":"uint256"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"endBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"maxRewardTokenAvailableForFarming","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numberOfPools","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"erc20Token","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accRewardPerShare","type":"uint256"},{"internalType":"uint256","name":"maxStakingAmountPerUser","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardGuildBank","outputs":[{"internalType":"contract Guild","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"uint256","name":"_maxStakingAmountPerUser","type":"uint256"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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