Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "synthetix/contracts/interfaces/ISynthetix.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "../interfaces/ISwap.sol";

/**
 * @title SynthSwapper
 * @notice Replacement of Virtual Synths in favor of gas savings. Allows swapping synths via the Synthetix protocol
 * or Saddle's pools. The `Bridge.sol` contract will deploy minimal clones of this contract upon initiating
 * any cross-asset swaps.
 */
contract SynthSwapper is Initializable {
    using SafeERC20 for IERC20;

    address payable owner;
    // SYNTHETIX points to `ProxyERC20` (0xC011a73ee8576Fb46F5E1c5751cA3B9Fe0af2a6F).
    // This contract is a proxy of `Synthetix` and is used to exchange synths.
    ISynthetix public constant SYNTHETIX =
        ISynthetix(0xC011a73ee8576Fb46F5E1c5751cA3B9Fe0af2a6F);
    // "SADDLE" in bytes32 form
    bytes32 public constant TRACKING =
        0x534144444c450000000000000000000000000000000000000000000000000000;

    /**
     * @notice Initializes the contract when deploying this directly. This prevents
     * others from calling initialize() on the target contract and setting themself as the owner.
     */
    constructor() public {
        initialize();
    }

    /**
     * @notice This modifier checks if the caller is the owner
     */
    modifier onlyOwner() {
        require(msg.sender == owner, "is not owner");
        _;
    }

    /**
     * @notice Sets the `owner` as the caller of this function
     */
    function initialize() public initializer {
        require(owner == address(0), "owner already set");
        owner = msg.sender;
    }

    /**
     * @notice Swaps the synth to another synth via the Synthetix protocol.
     * @param sourceKey currency key of the source synth
     * @param synthAmount amount of the synth to swap
     * @param destKey currency key of the destination synth
     * @return amount of the destination synth received
     */
    function swapSynth(
        bytes32 sourceKey,
        uint256 synthAmount,
        bytes32 destKey
    ) external onlyOwner returns (uint256) {
        return
            SYNTHETIX.exchangeWithTracking(
                sourceKey,
                synthAmount,
                destKey,
                msg.sender,
                TRACKING
            );
    }

    /**
     * @notice Approves the given `tokenFrom` and swaps it to another token via the given `swap` pool.
     * @param swap the address of a pool to swap through
     * @param tokenFrom the address of the stored synth
     * @param tokenFromIndex the index of the token to swap from
     * @param tokenToIndex the token the user wants to swap to
     * @param tokenFromAmount the amount of the token to swap
     * @param minAmount the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     * @param recipient the address of the recipient
     */
    function swapSynthToToken(
        ISwap swap,
        IERC20 tokenFrom,
        uint8 tokenFromIndex,
        uint8 tokenToIndex,
        uint256 tokenFromAmount,
        uint256 minAmount,
        uint256 deadline,
        address recipient
    ) external onlyOwner returns (IERC20, uint256) {
        tokenFrom.approve(address(swap), tokenFromAmount);
        swap.swap(
            tokenFromIndex,
            tokenToIndex,
            tokenFromAmount,
            minAmount,
            deadline
        );
        IERC20 tokenTo = swap.getToken(tokenToIndex);
        uint256 balance = tokenTo.balanceOf(address(this));
        tokenTo.safeTransfer(recipient, balance);
        return (tokenTo, balance);
    }

    /**
     * @notice Withdraws the given amount of `token` to the `recipient`.
     * @param token the address of the token to withdraw
     * @param recipient the address of the account to receive the token
     * @param withdrawAmount the amount of the token to withdraw
     * @param shouldDestroy whether this contract should be destroyed after this call
     */
    function withdraw(
        IERC20 token,
        address recipient,
        uint256 withdrawAmount,
        bool shouldDestroy
    ) external onlyOwner {
        token.safeTransfer(recipient, withdrawAmount);
        if (shouldDestroy) {
            _destroy();
        }
    }

    /**
     * @notice Destroys this contract. Only owner can call this function.
     */
    function destroy() external onlyOwner {
        _destroy();
    }

    function _destroy() internal {
        selfdestruct(msg.sender);
    }
}

// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IAllowlist {
    function getPoolAccountLimit(address poolAddress)
        external
        view
        returns (uint256);

    function getPoolCap(address poolAddress) external view returns (uint256);

    function verifyAddress(address account, bytes32[] calldata merkleProof)
        external
        returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IAllowlist.sol";

interface ISwap {
    // pool data view functions
    function getA() external view returns (uint256);

    function getAllowlist() external view returns (IAllowlist);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 a,
        uint256 fee,
        uint256 adminFee,
        address lpTokenTargetAddress
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);
}

pragma solidity >=0.4.24;

// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}

pragma solidity >=0.4.24;

import "./ISynth.sol";
import "./IVirtualSynth.sol";

// https://docs.synthetix.io/contracts/source/interfaces/isynthetix
interface ISynthetix {
    // Views
    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint);

    function isWaitingPeriod(bytes32 currencyKey) external view returns (bool);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey) external view returns (uint);

    function totalIssuedSynthsExcludeEtherCollateral(bytes32 currencyKey) external view returns (uint);

    function transferableSynthetix(address account) external view returns (uint transferable);

    // Mutative Functions
    function burnSynths(uint amount) external;

    function burnSynthsOnBehalf(address burnForAddress, uint amount) external;

    function burnSynthsToTarget() external;

    function burnSynthsToTargetOnBehalf(address burnForAddress) external;

    function exchange(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeOnBehalf(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeWithTracking(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeOnBehalfWithTracking(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeWithVirtual(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function issueMaxSynths() external;

    function issueMaxSynthsOnBehalf(address issueForAddress) external;

    function issueSynths(uint amount) external;

    function issueSynthsOnBehalf(address issueForAddress, uint amount) external;

    function mint() external returns (bool);

    function settle(bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );

    // Liquidations
    function liquidateDelinquentAccount(address account, uint susdAmount) external returns (bool);

    // Restricted Functions

    function mintSecondary(address account, uint amount) external;

    function mintSecondaryRewards(uint amount) external;

    function burnSecondary(address account, uint amount) external;
}

pragma solidity >=0.4.24;

import "./ISynth.sol";

interface IVirtualSynth {
    // Views
    function balanceOfUnderlying(address account) external view returns (uint);

    function rate() external view returns (uint);

    function readyToSettle() external view returns (bool);

    function secsLeftInWaitingPeriod() external view returns (uint);

    function settled() external view returns (bool);

    function synth() external view returns (ISynth);

    // Mutative functions
    function settle(address account) external;
}

{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"SYNTHETIX","outputs":[{"internalType":"contract ISynthetix","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TRACKING","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"destroy","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"sourceKey","type":"bytes32"},{"internalType":"uint256","name":"synthAmount","type":"uint256"},{"internalType":"bytes32","name":"destKey","type":"bytes32"}],"name":"swapSynth","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISwap","name":"swap","type":"address"},{"internalType":"contract IERC20","name":"tokenFrom","type":"address"},{"internalType":"uint8","name":"tokenFromIndex","type":"uint8"},{"internalType":"uint8","name":"tokenToIndex","type":"uint8"},{"internalType":"uint256","name":"tokenFromAmount","type":"uint256"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"address","name":"recipient","type":"address"}],"name":"swapSynthToToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"withdrawAmount","type":"uint256"},{"internalType":"bool","name":"shouldDestroy","type":"bool"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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