Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Predeploys } from "src/libraries/Predeploys.sol";
import { StandardBridge } from "src/universal/StandardBridge.sol";
import { ISemver } from "src/universal/ISemver.sol";
import { CrossDomainMessenger } from "src/universal/CrossDomainMessenger.sol";
import { SuperchainConfig } from "src/L1/SuperchainConfig.sol";
import { Constants } from "src/libraries/Constants.sol";

/// @custom:proxied
/// @title L1StandardBridge
/// @notice The L1StandardBridge is responsible for transfering ETH and ERC20 tokens between L1 and
///         L2. In the case that an ERC20 token is native to L1, it will be escrowed within this
///         contract. If the ERC20 token is native to L2, it will be burnt. Before Bedrock, ETH was
///         stored within this contract. After Bedrock, ETH is instead stored inside the
///         OptimismPortal contract.
///         NOTE: this contract is not intended to support all variations of ERC20 tokens. Examples
///         of some token types that may not be properly supported by this contract include, but are
///         not limited to: tokens with transfer fees, rebasing tokens, and tokens with blocklists.
contract L1StandardBridge is StandardBridge, ISemver {
    /// @custom:legacy
    /// @notice Emitted whenever a deposit of ETH from L1 into L2 is initiated.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of ETH deposited.
    /// @param extraData Extra data attached to the deposit.
    event ETHDepositInitiated(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @custom:legacy
    /// @notice Emitted whenever a withdrawal of ETH from L2 to L1 is finalized.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of ETH withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ETHWithdrawalFinalized(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 deposit is initiated.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of the ERC20 deposited.
    /// @param extraData Extra data attached to the deposit.
    event ERC20DepositInitiated(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 withdrawal is finalized.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of the ERC20 withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ERC20WithdrawalFinalized(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @notice Semantic version.
    /// @custom:semver 2.1.0
    string public constant version = "2.1.0";

    /// @notice Address of the SuperchainConfig contract.
    SuperchainConfig public superchainConfig;

    /// @notice Constructs the L1StandardBridge contract.
    constructor() StandardBridge() {
        initialize({ _messenger: CrossDomainMessenger(address(0)), _superchainConfig: SuperchainConfig(address(0)) });
    }

    /// @notice Initializer.
    /// @param _messenger        Contract for the CrossDomainMessenger on this network.
    /// @param _superchainConfig Contract for the SuperchainConfig on this network.
    function initialize(CrossDomainMessenger _messenger, SuperchainConfig _superchainConfig) public initializer {
        superchainConfig = _superchainConfig;
        __StandardBridge_init({
            _messenger: _messenger,
            _otherBridge: StandardBridge(payable(Predeploys.L2_STANDARD_BRIDGE))
        });
    }

    /// @inheritdoc StandardBridge
    function paused() public view override returns (bool) {
        return superchainConfig.paused();
    }

    /// @notice Allows EOAs to bridge ETH by sending directly to the bridge.
    receive() external payable override onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, RECEIVE_DEFAULT_GAS_LIMIT, bytes(""));
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ETH into the sender's account on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETH(uint32 _minGasLimit, bytes calldata _extraData) external payable onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ETH into a target account on L2.
    ///         Note that if ETH is sent to a contract on L2 and the call fails, then that ETH will
    ///         be locked in the L2StandardBridge. ETH may be recoverable if the call can be
    ///         successfully replayed by increasing the amount of gas supplied to the call. If the
    ///         call will fail for any amount of gas, then the ETH will be locked permanently.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETHTo(address _to, uint32 _minGasLimit, bytes calldata _extraData) external payable {
        _initiateETHDeposit(msg.sender, _to, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into the sender's account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20(
        address _l1Token,
        address _l2Token,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
        onlyEOA
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into a target account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, _to, _amount, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ETH from L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of ETH to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeETHWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
        payable
    {
        finalizeBridgeETH(_from, _to, _amount, _extraData);
    }

    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ERC20 tokens from L2.
    /// @param _l1Token   Address of the token on L1.
    /// @param _l2Token   Address of the corresponding token on L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of the ERC20 to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeERC20Withdrawal(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
    {
        finalizeBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _extraData);
    }

    /// @custom:legacy
    /// @notice Retrieves the access of the corresponding L2 bridge contract.
    /// @return Address of the corresponding L2 bridge contract.
    function l2TokenBridge() external view returns (address) {
        return address(otherBridge);
    }

    /// @notice Internal function for initiating an ETH deposit.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateETHDeposit(address _from, address _to, uint32 _minGasLimit, bytes memory _extraData) internal {
        _initiateBridgeETH(_from, _to, msg.value, _minGasLimit, _extraData);
    }

    /// @notice Internal function for initiating an ERC20 deposit.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateERC20Deposit(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        _initiateBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _minGasLimit, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ETHDepositInitiated event followed by the ETHBridgeInitiated event.
    ///         This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHDepositInitiated(_from, _to, _amount, _extraData);
        super._emitETHBridgeInitiated(_from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20DepositInitiated event followed by the ERC20BridgeInitiated
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHWithdrawalFinalized(_from, _to, _amount, _extraData);
        super._emitETHBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20DepositInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20WithdrawalFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Predeploys
/// @notice Contains constant addresses for contracts that are pre-deployed to the L2 system.
library Predeploys {
    /// @notice Address of the L2ToL1MessagePasser predeploy.
    address internal constant L2_TO_L1_MESSAGE_PASSER = 0x4200000000000000000000000000000000000016;

    /// @notice Address of the L2CrossDomainMessenger predeploy.
    address internal constant L2_CROSS_DOMAIN_MESSENGER = 0x4200000000000000000000000000000000000007;

    /// @notice Address of the L2StandardBridge predeploy.
    address internal constant L2_STANDARD_BRIDGE = 0x4200000000000000000000000000000000000010;

    /// @notice Address of the L2ERC721Bridge predeploy.
    address internal constant L2_ERC721_BRIDGE = 0x4200000000000000000000000000000000000014;

    //// @notice Address of the SequencerFeeWallet predeploy.
    address internal constant SEQUENCER_FEE_WALLET = 0x4200000000000000000000000000000000000011;

    /// @notice Address of the OptimismMintableERC20Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC20_FACTORY = 0x4200000000000000000000000000000000000012;

    /// @notice Address of the OptimismMintableERC721Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC721_FACTORY = 0x4200000000000000000000000000000000000017;

    /// @notice Address of the L1Block predeploy.
    address internal constant L1_BLOCK_ATTRIBUTES = 0x4200000000000000000000000000000000000015;

    /// @notice Address of the GasPriceOracle predeploy. Includes fee information
    ///         and helpers for computing the L1 portion of the transaction fee.
    address internal constant GAS_PRICE_ORACLE = 0x420000000000000000000000000000000000000F;

    /// @custom:legacy
    /// @notice Address of the L1MessageSender predeploy. Deprecated. Use L2CrossDomainMessenger
    ///         or access tx.origin (or msg.sender) in a L1 to L2 transaction instead.
    address internal constant L1_MESSAGE_SENDER = 0x4200000000000000000000000000000000000001;

    /// @custom:legacy
    /// @notice Address of the DeployerWhitelist predeploy. No longer active.
    address internal constant DEPLOYER_WHITELIST = 0x4200000000000000000000000000000000000002;

    /// @notice Address of the canonical WETH9 contract.
    address internal constant WETH9 = 0x4200000000000000000000000000000000000006;

    /// @custom:legacy
    /// @notice Address of the LegacyERC20ETH predeploy. Deprecated. Balances are migrated to the
    ///         state trie as of the Bedrock upgrade. Contract has been locked and write functions
    ///         can no longer be accessed.
    address internal constant LEGACY_ERC20_ETH = 0xDeadDeAddeAddEAddeadDEaDDEAdDeaDDeAD0000;

    /// @custom:legacy
    /// @notice Address of the L1BlockNumber predeploy. Deprecated. Use the L1Block predeploy
    ///         instead, which exposes more information about the L1 state.
    address internal constant L1_BLOCK_NUMBER = 0x4200000000000000000000000000000000000013;

    /// @custom:legacy
    /// @notice Address of the LegacyMessagePasser predeploy. Deprecate. Use the updated
    ///         L2ToL1MessagePasser contract instead.
    address internal constant LEGACY_MESSAGE_PASSER = 0x4200000000000000000000000000000000000000;

    /// @notice Address of the ProxyAdmin predeploy.
    address internal constant PROXY_ADMIN = 0x4200000000000000000000000000000000000018;

    /// @notice Address of the BaseFeeVault predeploy.
    address internal constant BASE_FEE_VAULT = 0x4200000000000000000000000000000000000019;

    /// @notice Address of the L1FeeVault predeploy.
    address internal constant L1_FEE_VAULT = 0x420000000000000000000000000000000000001A;

    /// @notice Address of the GovernanceToken predeploy.
    address internal constant GOVERNANCE_TOKEN = 0x4200000000000000000000000000000000000042;

    /// @notice Address of the SchemaRegistry predeploy.
    address internal constant SCHEMA_REGISTRY = 0x4200000000000000000000000000000000000020;

    /// @notice Address of the EAS predeploy.
    address internal constant EAS = 0x4200000000000000000000000000000000000021;

    /// @notice Address of the MultiCall3 predeploy.
    address internal constant MultiCall3 = 0xcA11bde05977b3631167028862bE2a173976CA11;

    /// @notice Address of the Create2Deployer predeploy.
    address internal constant Create2Deployer = 0x13b0D85CcB8bf860b6b79AF3029fCA081AE9beF2;

    /// @notice Address of the Safe_v130 predeploy.
    address internal constant Safe_v130 = 0x69f4D1788e39c87893C980c06EdF4b7f686e2938;

    /// @notice Address of the SafeL2_v130 predeploy.
    address internal constant SafeL2_v130 = 0xfb1bffC9d739B8D520DaF37dF666da4C687191EA;

    /// @notice Address of the MultiSendCallOnly_v130 predeploy.
    address internal constant MultiSendCallOnly_v130 = 0xA1dabEF33b3B82c7814B6D82A79e50F4AC44102B;

    /// @notice Address of the SafeSingletonFactory predeploy.
    address internal constant SafeSingletonFactory = 0x914d7Fec6aaC8cd542e72Bca78B30650d45643d7;

    /// @notice Address of the DeterministicDeploymentProxy predeploy.
    address internal constant DeterministicDeploymentProxy = 0x4e59b44847b379578588920cA78FbF26c0B4956C;

    /// @notice Address of the MultiSend_v130 predeploy.
    address internal constant MultiSend_v130 = 0x998739BFdAAdde7C933B942a68053933098f9EDa;

    /// @notice Address of the Permit2 predeploy.
    address internal constant Permit2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;

    /// @notice Address of the SenderCreator predeploy.
    address internal constant SenderCreator = 0x7fc98430eAEdbb6070B35B39D798725049088348;

    /// @notice Address of the EntryPoint predeploy.
    address internal constant EntryPoint = 0x5FF137D4b0FDCD49DcA30c7CF57E578a026d2789;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { ERC165Checker } from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { SafeCall } from "src/libraries/SafeCall.sol";
import { IOptimismMintableERC20, ILegacyMintableERC20 } from "src/universal/IOptimismMintableERC20.sol";
import { CrossDomainMessenger } from "src/universal/CrossDomainMessenger.sol";
import { OptimismMintableERC20 } from "src/universal/OptimismMintableERC20.sol";
import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";

/// @custom:upgradeable
/// @title StandardBridge
/// @notice StandardBridge is a base contract for the L1 and L2 standard ERC20 bridges. It handles
///         the core bridging logic, including escrowing tokens that are native to the local chain
///         and minting/burning tokens that are native to the remote chain.
abstract contract StandardBridge is Initializable {
    using SafeERC20 for IERC20;

    /// @notice The L2 gas limit set when eth is depoisited using the receive() function.
    uint32 internal constant RECEIVE_DEFAULT_GAS_LIMIT = 200_000;

    /// @custom:legacy
    /// @custom:spacer messenger
    /// @notice Spacer for backwards compatibility.
    bytes30 private spacer_0_2_30;

    /// @custom:legacy
    /// @custom:spacer l2TokenBridge
    /// @notice Spacer for backwards compatibility.
    address private spacer_1_0_20;

    /// @notice Mapping that stores deposits for a given pair of local and remote tokens.
    mapping(address => mapping(address => uint256)) public deposits;

    /// @notice Messenger contract on this domain.
    /// @custom:network-specific
    CrossDomainMessenger public messenger;

    /// @notice Corresponding bridge on the other domain.
    /// @custom:network-specific
    StandardBridge public otherBridge;

    /// @notice Reserve extra slots (to a total of 50) in the storage layout for future upgrades.
    ///         A gap size of 45 was chosen here, so that the first slot used in a child contract
    ///         would be a multiple of 50.
    uint256[45] private __gap;

    /// @notice Emitted when an ETH bridge is initiated to the other chain.
    /// @param from      Address of the sender.
    /// @param to        Address of the receiver.
    /// @param amount    Amount of ETH sent.
    /// @param extraData Extra data sent with the transaction.
    event ETHBridgeInitiated(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @notice Emitted when an ETH bridge is finalized on this chain.
    /// @param from      Address of the sender.
    /// @param to        Address of the receiver.
    /// @param amount    Amount of ETH sent.
    /// @param extraData Extra data sent with the transaction.
    event ETHBridgeFinalized(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @notice Emitted when an ERC20 bridge is initiated to the other chain.
    /// @param localToken  Address of the ERC20 on this chain.
    /// @param remoteToken Address of the ERC20 on the remote chain.
    /// @param from        Address of the sender.
    /// @param to          Address of the receiver.
    /// @param amount      Amount of the ERC20 sent.
    /// @param extraData   Extra data sent with the transaction.
    event ERC20BridgeInitiated(
        address indexed localToken,
        address indexed remoteToken,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @notice Emitted when an ERC20 bridge is finalized on this chain.
    /// @param localToken  Address of the ERC20 on this chain.
    /// @param remoteToken Address of the ERC20 on the remote chain.
    /// @param from        Address of the sender.
    /// @param to          Address of the receiver.
    /// @param amount      Amount of the ERC20 sent.
    /// @param extraData   Extra data sent with the transaction.
    event ERC20BridgeFinalized(
        address indexed localToken,
        address indexed remoteToken,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @notice Only allow EOAs to call the functions. Note that this is not safe against contracts
    ///         calling code within their constructors, but also doesn't really matter since we're
    ///         just trying to prevent users accidentally depositing with smart contract wallets.
    modifier onlyEOA() {
        require(!Address.isContract(msg.sender), "StandardBridge: function can only be called from an EOA");
        _;
    }

    /// @notice Ensures that the caller is a cross-chain message from the other bridge.
    modifier onlyOtherBridge() {
        require(
            msg.sender == address(messenger) && messenger.xDomainMessageSender() == address(otherBridge),
            "StandardBridge: function can only be called from the other bridge"
        );
        _;
    }

    /// @notice Initializer.
    /// @param _messenger   Contract for CrossDomainMessenger on this network.
    /// @param _otherBridge Contract for the other StandardBridge contract.
    // solhint-disable-next-line func-name-mixedcase
    function __StandardBridge_init(
        CrossDomainMessenger _messenger,
        StandardBridge _otherBridge
    )
        internal
        onlyInitializing
    {
        messenger = _messenger;
        otherBridge = _otherBridge;
    }

    /// @notice Allows EOAs to bridge ETH by sending directly to the bridge.
    ///         Must be implemented by contracts that inherit.
    receive() external payable virtual;

    /// @notice Getter for messenger contract.
    ///         Public getter is legacy and will be removed in the future. Use `messenger` instead.
    /// @return Contract of the messenger on this domain.
    /// @custom:legacy
    function MESSENGER() external view returns (CrossDomainMessenger) {
        return messenger;
    }

    /// @notice Getter for the other bridge contract.
    ///         Public getter is legacy and will be removed in the future. Use `otherBridge` instead.
    /// @return Contract of the bridge on the other network.
    /// @custom:legacy
    function OTHER_BRIDGE() external view returns (StandardBridge) {
        return otherBridge;
    }

    /// @notice This function should return true if the contract is paused.
    ///         On L1 this function will check the SuperchainConfig for its paused status.
    ///         On L2 this function should be a no-op.
    /// @return Whether or not the contract is paused.
    function paused() public view virtual returns (bool) {
        return false;
    }

    /// @notice Sends ETH to the sender's address on the other chain.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeETH(uint32 _minGasLimit, bytes calldata _extraData) public payable onlyEOA {
        _initiateBridgeETH(msg.sender, msg.sender, msg.value, _minGasLimit, _extraData);
    }

    /// @notice Sends ETH to a receiver's address on the other chain. Note that if ETH is sent to a
    ///         smart contract and the call fails, the ETH will be temporarily locked in the
    ///         StandardBridge on the other chain until the call is replayed. If the call cannot be
    ///         replayed with any amount of gas (call always reverts), then the ETH will be
    ///         permanently locked in the StandardBridge on the other chain. ETH will also
    ///         be locked if the receiver is the other bridge, because finalizeBridgeETH will revert
    ///         in that case.
    /// @param _to          Address of the receiver.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeETHTo(address _to, uint32 _minGasLimit, bytes calldata _extraData) public payable {
        _initiateBridgeETH(msg.sender, _to, msg.value, _minGasLimit, _extraData);
    }

    /// @notice Sends ERC20 tokens to the sender's address on the other chain. Note that if the
    ///         ERC20 token on the other chain does not recognize the local token as the correct
    ///         pair token, the ERC20 bridge will fail and the tokens will be returned to sender on
    ///         this chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeERC20(
        address _localToken,
        address _remoteToken,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        public
        virtual
        onlyEOA
    {
        _initiateBridgeERC20(_localToken, _remoteToken, msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }

    /// @notice Sends ERC20 tokens to a receiver's address on the other chain. Note that if the
    ///         ERC20 token on the other chain does not recognize the local token as the correct
    ///         pair token, the ERC20 bridge will fail and the tokens will be returned to sender on
    ///         this chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeERC20To(
        address _localToken,
        address _remoteToken,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        public
        virtual
    {
        _initiateBridgeERC20(_localToken, _remoteToken, msg.sender, _to, _amount, _minGasLimit, _extraData);
    }

    /// @notice Finalizes an ETH bridge on this chain. Can only be triggered by the other
    ///         StandardBridge contract on the remote chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH being bridged.
    /// @param _extraData Extra data to be sent with the transaction. Note that the recipient will
    ///                   not be triggered with this data, but it will be emitted and can be used
    ///                   to identify the transaction.
    function finalizeBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        public
        payable
        onlyOtherBridge
    {
        require(paused() == false, "StandardBridge: paused");
        require(msg.value == _amount, "StandardBridge: amount sent does not match amount required");
        require(_to != address(this), "StandardBridge: cannot send to self");
        require(_to != address(messenger), "StandardBridge: cannot send to messenger");

        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeFinalized(_from, _to, _amount, _extraData);

        bool success = SafeCall.call(_to, gasleft(), _amount, hex"");
        require(success, "StandardBridge: ETH transfer failed");
    }

    /// @notice Finalizes an ERC20 bridge on this chain. Can only be triggered by the other
    ///         StandardBridge contract on the remote chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 being bridged.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function finalizeBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        public
        onlyOtherBridge
    {
        require(paused() == false, "StandardBridge: paused");
        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );

            OptimismMintableERC20(_localToken).mint(_to, _amount);
        } else {
            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] - _amount;
            IERC20(_localToken).safeTransfer(_to, _amount);
        }

        // Emit the correct events. By default this will be ERC20BridgeFinalized, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /// @notice Initiates a bridge of ETH through the CrossDomainMessenger.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of ETH being bridged.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function _initiateBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        require(msg.value == _amount, "StandardBridge: bridging ETH must include sufficient ETH value");

        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeInitiated(_from, _to, _amount, _extraData);

        messenger.sendMessage{ value: _amount }({
            _target: address(otherBridge),
            _message: abi.encodeWithSelector(this.finalizeBridgeETH.selector, _from, _to, _amount, _extraData),
            _minGasLimit: _minGasLimit
        });
    }

    /// @notice Sends ERC20 tokens to a receiver's address on the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function _initiateBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );

            OptimismMintableERC20(_localToken).burn(_from, _amount);
        } else {
            IERC20(_localToken).safeTransferFrom(_from, address(this), _amount);
            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] + _amount;
        }

        // Emit the correct events. By default this will be ERC20BridgeInitiated, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);

        messenger.sendMessage({
            _target: address(otherBridge),
            _message: abi.encodeWithSelector(
                this.finalizeBridgeERC20.selector,
                // Because this call will be executed on the remote chain, we reverse the order of
                // the remote and local token addresses relative to their order in the
                // finalizeBridgeERC20 function.
                _remoteToken,
                _localToken,
                _from,
                _to,
                _amount,
                _extraData
                ),
            _minGasLimit: _minGasLimit
        });
    }

    /// @notice Checks if a given address is an OptimismMintableERC20. Not perfect, but good enough.
    ///         Just the way we like it.
    /// @param _token Address of the token to check.
    /// @return True if the token is an OptimismMintableERC20.
    function _isOptimismMintableERC20(address _token) internal view returns (bool) {
        return ERC165Checker.supportsInterface(_token, type(ILegacyMintableERC20).interfaceId)
            || ERC165Checker.supportsInterface(_token, type(IOptimismMintableERC20).interfaceId);
    }

    /// @notice Checks if the "other token" is the correct pair token for the OptimismMintableERC20.
    ///         Calls can be saved in the future by combining this logic with
    ///         `_isOptimismMintableERC20`.
    /// @param _mintableToken OptimismMintableERC20 to check against.
    /// @param _otherToken    Pair token to check.
    /// @return True if the other token is the correct pair token for the OptimismMintableERC20.
    function _isCorrectTokenPair(address _mintableToken, address _otherToken) internal view returns (bool) {
        if (ERC165Checker.supportsInterface(_mintableToken, type(ILegacyMintableERC20).interfaceId)) {
            return _otherToken == ILegacyMintableERC20(_mintableToken).l1Token();
        } else {
            return _otherToken == IOptimismMintableERC20(_mintableToken).remoteToken();
        }
    }

    /// @notice Emits the ETHBridgeInitiated event and if necessary the appropriate legacy event
    ///         when an ETH bridge is finalized on this chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH sent.
    /// @param _extraData Extra data sent with the transaction.
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ETHBridgeInitiated(_from, _to, _amount, _extraData);
    }

    /// @notice Emits the ETHBridgeFinalized and if necessary the appropriate legacy event when an
    ///         ETH bridge is finalized on this chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH sent.
    /// @param _extraData Extra data sent with the transaction.
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ETHBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /// @notice Emits the ERC20BridgeInitiated event and if necessary the appropriate legacy
    ///         event when an ERC20 bridge is initiated to the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the ERC20 on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 sent.
    /// @param _extraData   Extra data sent with the transaction.
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /// @notice Emits the ERC20BridgeFinalized event and if necessary the appropriate legacy
    ///         event when an ERC20 bridge is initiated to the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the ERC20 on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 sent.
    /// @param _extraData   Extra data sent with the transaction.
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title ISemver
/// @notice ISemver is a simple contract for ensuring that contracts are
///         versioned using semantic versioning.
interface ISemver {
    /// @notice Getter for the semantic version of the contract. This is not
    ///         meant to be used onchain but instead meant to be used by offchain
    ///         tooling.
    /// @return Semver contract version as a string.
    function version() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Initializable } from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import { SafeCall } from "src/libraries/SafeCall.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { Encoding } from "src/libraries/Encoding.sol";
import { Constants } from "src/libraries/Constants.sol";

/// @custom:legacy
/// @title CrossDomainMessengerLegacySpacer0
/// @notice Contract only exists to add a spacer to the CrossDomainMessenger where the
///         libAddressManager variable used to exist. Must be the first contract in the inheritance
///         tree of the CrossDomainMessenger.
contract CrossDomainMessengerLegacySpacer0 {
    /// @custom:legacy
    /// @custom:spacer libAddressManager
    /// @notice Spacer for backwards compatibility.
    address private spacer_0_0_20;
}

/// @custom:legacy
/// @title CrossDomainMessengerLegacySpacer1
/// @notice Contract only exists to add a spacer to the CrossDomainMessenger where the
///         PausableUpgradable and OwnableUpgradeable variables used to exist. Must be
///         the third contract in the inheritance tree of the CrossDomainMessenger.
contract CrossDomainMessengerLegacySpacer1 {
    /// @custom:legacy
    /// @custom:spacer ContextUpgradable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         ContextUpgradable.
    uint256[50] private spacer_1_0_1600;

    /// @custom:legacy
    /// @custom:spacer OwnableUpgradeable's _owner
    /// @notice Spacer for backwards compatibility.
    ///         Come from OpenZeppelin OwnableUpgradeable.
    address private spacer_51_0_20;

    /// @custom:legacy
    /// @custom:spacer OwnableUpgradeable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         OwnableUpgradeable.
    uint256[49] private spacer_52_0_1568;

    /// @custom:legacy
    /// @custom:spacer PausableUpgradable's _paused
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         PausableUpgradable.
    bool private spacer_101_0_1;

    /// @custom:legacy
    /// @custom:spacer PausableUpgradable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         PausableUpgradable.
    uint256[49] private spacer_102_0_1568;

    /// @custom:legacy
    /// @custom:spacer ReentrancyGuardUpgradeable's `_status` field.
    /// @notice Spacer for backwards compatibility.
    uint256 private spacer_151_0_32;

    /// @custom:legacy
    /// @custom:spacer ReentrancyGuardUpgradeable's __gap
    /// @notice Spacer for backwards compatibility.
    uint256[49] private spacer_152_0_1568;

    /// @custom:legacy
    /// @custom:spacer blockedMessages
    /// @notice Spacer for backwards compatibility.
    mapping(bytes32 => bool) private spacer_201_0_32;

    /// @custom:legacy
    /// @custom:spacer relayedMessages
    /// @notice Spacer for backwards compatibility.
    mapping(bytes32 => bool) private spacer_202_0_32;
}

/// @custom:upgradeable
/// @title CrossDomainMessenger
/// @notice CrossDomainMessenger is a base contract that provides the core logic for the L1 and L2
///         cross-chain messenger contracts. It's designed to be a universal interface that only
///         needs to be extended slightly to provide low-level message passing functionality on each
///         chain it's deployed on. Currently only designed for message passing between two paired
///         chains and does not support one-to-many interactions.
///         Any changes to this contract MUST result in a semver bump for contracts that inherit it.
abstract contract CrossDomainMessenger is
    CrossDomainMessengerLegacySpacer0,
    Initializable,
    CrossDomainMessengerLegacySpacer1
{
    /// @notice Current message version identifier.
    uint16 public constant MESSAGE_VERSION = 1;

    /// @notice Constant overhead added to the base gas for a message.
    uint64 public constant RELAY_CONSTANT_OVERHEAD = 200_000;

    /// @notice Numerator for dynamic overhead added to the base gas for a message.
    uint64 public constant MIN_GAS_DYNAMIC_OVERHEAD_NUMERATOR = 64;

    /// @notice Denominator for dynamic overhead added to the base gas for a message.
    uint64 public constant MIN_GAS_DYNAMIC_OVERHEAD_DENOMINATOR = 63;

    /// @notice Extra gas added to base gas for each byte of calldata in a message.
    uint64 public constant MIN_GAS_CALLDATA_OVERHEAD = 16;

    /// @notice Gas reserved for performing the external call in `relayMessage`.
    uint64 public constant RELAY_CALL_OVERHEAD = 40_000;

    /// @notice Gas reserved for finalizing the execution of `relayMessage` after the safe call.
    uint64 public constant RELAY_RESERVED_GAS = 40_000;

    /// @notice Gas reserved for the execution between the `hasMinGas` check and the external
    ///         call in `relayMessage`.
    uint64 public constant RELAY_GAS_CHECK_BUFFER = 5_000;

    /// @notice Mapping of message hashes to boolean receipt values. Note that a message will only
    ///         be present in this mapping if it has successfully been relayed on this chain, and
    ///         can therefore not be relayed again.
    mapping(bytes32 => bool) public successfulMessages;

    /// @notice Address of the sender of the currently executing message on the other chain. If the
    ///         value of this variable is the default value (0x00000000...dead) then no message is
    ///         currently being executed. Use the xDomainMessageSender getter which will throw an
    ///         error if this is the case.
    address internal xDomainMsgSender;

    /// @notice Nonce for the next message to be sent, without the message version applied. Use the
    ///         messageNonce getter which will insert the message version into the nonce to give you
    ///         the actual nonce to be used for the message.
    uint240 internal msgNonce;

    /// @notice Mapping of message hashes to a boolean if and only if the message has failed to be
    ///         executed at least once. A message will not be present in this mapping if it
    ///         successfully executed on the first attempt.
    mapping(bytes32 => bool) public failedMessages;

    /// @notice CrossDomainMessenger contract on the other chain.
    /// @custom:network-specific
    CrossDomainMessenger public otherMessenger;

    /// @notice Reserve extra slots in the storage layout for future upgrades.
    ///         A gap size of 43 was chosen here, so that the first slot used in a child contract
    ///         would be 1 plus a multiple of 50.
    uint256[43] private __gap;

    /// @notice Emitted whenever a message is sent to the other chain.
    /// @param target       Address of the recipient of the message.
    /// @param sender       Address of the sender of the message.
    /// @param message      Message to trigger the recipient address with.
    /// @param messageNonce Unique nonce attached to the message.
    /// @param gasLimit     Minimum gas limit that the message can be executed with.
    event SentMessage(address indexed target, address sender, bytes message, uint256 messageNonce, uint256 gasLimit);

    /// @notice Additional event data to emit, required as of Bedrock. Cannot be merged with the
    ///         SentMessage event without breaking the ABI of this contract, this is good enough.
    /// @param sender Address of the sender of the message.
    /// @param value  ETH value sent along with the message to the recipient.
    event SentMessageExtension1(address indexed sender, uint256 value);

    /// @notice Emitted whenever a message is successfully relayed on this chain.
    /// @param msgHash Hash of the message that was relayed.
    event RelayedMessage(bytes32 indexed msgHash);

    /// @notice Emitted whenever a message fails to be relayed on this chain.
    /// @param msgHash Hash of the message that failed to be relayed.
    event FailedRelayedMessage(bytes32 indexed msgHash);

    /// @notice Sends a message to some target address on the other chain. Note that if the call
    ///         always reverts, then the message will be unrelayable, and any ETH sent will be
    ///         permanently locked. The same will occur if the target on the other chain is
    ///         considered unsafe (see the _isUnsafeTarget() function).
    /// @param _target      Target contract or wallet address.
    /// @param _message     Message to trigger the target address with.
    /// @param _minGasLimit Minimum gas limit that the message can be executed with.
    function sendMessage(address _target, bytes calldata _message, uint32 _minGasLimit) external payable {
        // Triggers a message to the other messenger. Note that the amount of gas provided to the
        // message is the amount of gas requested by the user PLUS the base gas value. We want to
        // guarantee the property that the call to the target contract will always have at least
        // the minimum gas limit specified by the user.
        _sendMessage({
            _to: address(otherMessenger),
            _gasLimit: baseGas(_message, _minGasLimit),
            _value: msg.value,
            _data: abi.encodeWithSelector(
                this.relayMessage.selector, messageNonce(), msg.sender, _target, msg.value, _minGasLimit, _message
                )
        });

        emit SentMessage(_target, msg.sender, _message, messageNonce(), _minGasLimit);
        emit SentMessageExtension1(msg.sender, msg.value);

        unchecked {
            ++msgNonce;
        }
    }

    /// @notice Relays a message that was sent by the other CrossDomainMessenger contract. Can only
    ///         be executed via cross-chain call from the other messenger OR if the message was
    ///         already received once and is currently being replayed.
    /// @param _nonce       Nonce of the message being relayed.
    /// @param _sender      Address of the user who sent the message.
    /// @param _target      Address that the message is targeted at.
    /// @param _value       ETH value to send with the message.
    /// @param _minGasLimit Minimum amount of gas that the message can be executed with.
    /// @param _message     Message to send to the target.
    function relayMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _minGasLimit,
        bytes calldata _message
    )
        external
        payable
    {
        // On L1 this function will check the Portal for its paused status.
        // On L2 this function should be a no-op, because paused will always return false.
        require(paused() == false, "CrossDomainMessenger: paused");

        (, uint16 version) = Encoding.decodeVersionedNonce(_nonce);
        require(version < 2, "CrossDomainMessenger: only version 0 or 1 messages are supported at this time");

        // If the message is version 0, then it's a migrated legacy withdrawal. We therefore need
        // to check that the legacy version of the message has not already been relayed.
        if (version == 0) {
            bytes32 oldHash = Hashing.hashCrossDomainMessageV0(_target, _sender, _message, _nonce);
            require(successfulMessages[oldHash] == false, "CrossDomainMessenger: legacy withdrawal already relayed");
        }

        // We use the v1 message hash as the unique identifier for the message because it commits
        // to the value and minimum gas limit of the message.
        bytes32 versionedHash =
            Hashing.hashCrossDomainMessageV1(_nonce, _sender, _target, _value, _minGasLimit, _message);

        if (_isOtherMessenger()) {
            // These properties should always hold when the message is first submitted (as
            // opposed to being replayed).
            assert(msg.value == _value);
            assert(!failedMessages[versionedHash]);
        } else {
            require(msg.value == 0, "CrossDomainMessenger: value must be zero unless message is from a system address");

            require(failedMessages[versionedHash], "CrossDomainMessenger: message cannot be replayed");
        }

        require(
            _isUnsafeTarget(_target) == false, "CrossDomainMessenger: cannot send message to blocked system address"
        );

        require(successfulMessages[versionedHash] == false, "CrossDomainMessenger: message has already been relayed");

        // If there is not enough gas left to perform the external call and finish the execution,
        // return early and assign the message to the failedMessages mapping.
        // We are asserting that we have enough gas to:
        // 1. Call the target contract (_minGasLimit + RELAY_CALL_OVERHEAD + RELAY_GAS_CHECK_BUFFER)
        //   1.a. The RELAY_CALL_OVERHEAD is included in `hasMinGas`.
        // 2. Finish the execution after the external call (RELAY_RESERVED_GAS).
        //
        // If `xDomainMsgSender` is not the default L2 sender, this function
        // is being re-entered. This marks the message as failed to allow it to be replayed.
        if (
            !SafeCall.hasMinGas(_minGasLimit, RELAY_RESERVED_GAS + RELAY_GAS_CHECK_BUFFER)
                || xDomainMsgSender != Constants.DEFAULT_L2_SENDER
        ) {
            failedMessages[versionedHash] = true;
            emit FailedRelayedMessage(versionedHash);

            // Revert in this case if the transaction was triggered by the estimation address. This
            // should only be possible during gas estimation or we have bigger problems. Reverting
            // here will make the behavior of gas estimation change such that the gas limit
            // computed will be the amount required to relay the message, even if that amount is
            // greater than the minimum gas limit specified by the user.
            if (tx.origin == Constants.ESTIMATION_ADDRESS) {
                revert("CrossDomainMessenger: failed to relay message");
            }

            return;
        }

        xDomainMsgSender = _sender;
        bool success = SafeCall.call(_target, gasleft() - RELAY_RESERVED_GAS, _value, _message);
        xDomainMsgSender = Constants.DEFAULT_L2_SENDER;

        if (success) {
            // This check is identical to one above, but it ensures that the same message cannot be relayed
            // twice, and adds a layer of protection against rentrancy.
            assert(successfulMessages[versionedHash] == false);
            successfulMessages[versionedHash] = true;
            emit RelayedMessage(versionedHash);
        } else {
            failedMessages[versionedHash] = true;
            emit FailedRelayedMessage(versionedHash);

            // Revert in this case if the transaction was triggered by the estimation address. This
            // should only be possible during gas estimation or we have bigger problems. Reverting
            // here will make the behavior of gas estimation change such that the gas limit
            // computed will be the amount required to relay the message, even if that amount is
            // greater than the minimum gas limit specified by the user.
            if (tx.origin == Constants.ESTIMATION_ADDRESS) {
                revert("CrossDomainMessenger: failed to relay message");
            }
        }
    }

    /// @notice Retrieves the address of the contract or wallet that initiated the currently
    ///         executing message on the other chain. Will throw an error if there is no message
    ///         currently being executed. Allows the recipient of a call to see who triggered it.
    /// @return Address of the sender of the currently executing message on the other chain.
    function xDomainMessageSender() external view returns (address) {
        require(
            xDomainMsgSender != Constants.DEFAULT_L2_SENDER, "CrossDomainMessenger: xDomainMessageSender is not set"
        );

        return xDomainMsgSender;
    }

    /// @notice Retrieves the address of the paired CrossDomainMessenger contract on the other chain
    ///         Public getter is legacy and will be removed in the future. Use `otherMessenger()` instead.
    /// @return CrossDomainMessenger contract on the other chain.
    /// @custom:legacy
    function OTHER_MESSENGER() public view returns (CrossDomainMessenger) {
        return otherMessenger;
    }

    /// @notice Retrieves the next message nonce. Message version will be added to the upper two
    ///         bytes of the message nonce. Message version allows us to treat messages as having
    ///         different structures.
    /// @return Nonce of the next message to be sent, with added message version.
    function messageNonce() public view returns (uint256) {
        return Encoding.encodeVersionedNonce(msgNonce, MESSAGE_VERSION);
    }

    /// @notice Computes the amount of gas required to guarantee that a given message will be
    ///         received on the other chain without running out of gas. Guaranteeing that a message
    ///         will not run out of gas is important because this ensures that a message can always
    ///         be replayed on the other chain if it fails to execute completely.
    /// @param _message     Message to compute the amount of required gas for.
    /// @param _minGasLimit Minimum desired gas limit when message goes to target.
    /// @return Amount of gas required to guarantee message receipt.
    function baseGas(bytes calldata _message, uint32 _minGasLimit) public pure returns (uint64) {
        return
        // Constant overhead
        RELAY_CONSTANT_OVERHEAD
        // Calldata overhead
        + (uint64(_message.length) * MIN_GAS_CALLDATA_OVERHEAD)
        // Dynamic overhead (EIP-150)
        + ((_minGasLimit * MIN_GAS_DYNAMIC_OVERHEAD_NUMERATOR) / MIN_GAS_DYNAMIC_OVERHEAD_DENOMINATOR)
        // Gas reserved for the worst-case cost of 3/5 of the `CALL` opcode's dynamic gas
        // factors. (Conservative)
        + RELAY_CALL_OVERHEAD
        // Relay reserved gas (to ensure execution of `relayMessage` completes after the
        // subcontext finishes executing) (Conservative)
        + RELAY_RESERVED_GAS
        // Gas reserved for the execution between the `hasMinGas` check and the `CALL`
        // opcode. (Conservative)
        + RELAY_GAS_CHECK_BUFFER;
    }

    /// @notice Initializer.
    /// @param _otherMessenger CrossDomainMessenger contract on the other chain.
    // solhint-disable-next-line func-name-mixedcase
    function __CrossDomainMessenger_init(CrossDomainMessenger _otherMessenger) internal onlyInitializing {
        // We only want to set the xDomainMsgSender to the default value if it hasn't been initialized yet,
        // meaning that this is a fresh contract deployment.
        // This prevents resetting the xDomainMsgSender to the default value during an upgrade, which would enable
        // a reentrant withdrawal to sandwhich the upgrade replay a withdrawal twice.
        if (xDomainMsgSender == address(0)) {
            xDomainMsgSender = Constants.DEFAULT_L2_SENDER;
        }
        otherMessenger = _otherMessenger;
    }

    /// @notice Sends a low-level message to the other messenger. Needs to be implemented by child
    ///         contracts because the logic for this depends on the network where the messenger is
    ///         being deployed.
    /// @param _to       Recipient of the message on the other chain.
    /// @param _gasLimit Minimum gas limit the message can be executed with.
    /// @param _value    Amount of ETH to send with the message.
    /// @param _data     Message data.
    function _sendMessage(address _to, uint64 _gasLimit, uint256 _value, bytes memory _data) internal virtual;

    /// @notice Checks whether the message is coming from the other messenger. Implemented by child
    ///         contracts because the logic for this depends on the network where the messenger is
    ///         being deployed.
    /// @return Whether the message is coming from the other messenger.
    function _isOtherMessenger() internal view virtual returns (bool);

    /// @notice Checks whether a given call target is a system address that could cause the
    ///         messenger to peform an unsafe action. This is NOT a mechanism for blocking user
    ///         addresses. This is ONLY used to prevent the execution of messages to specific
    ///         system addresses that could cause security issues, e.g., having the
    ///         CrossDomainMessenger send messages to itself.
    /// @param _target Address of the contract to check.
    /// @return Whether or not the address is an unsafe system address.
    function _isUnsafeTarget(address _target) internal view virtual returns (bool);

    /// @notice This function should return true if the contract is paused.
    ///         On L1 this function will check the SuperchainConfig for its paused status.
    ///         On L2 this function should be a no-op.
    /// @return Whether or not the contract is paused.
    function paused() public view virtual returns (bool) {
        return false;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import { ISemver } from "src/universal/ISemver.sol";
import { Storage } from "src/libraries/Storage.sol";

/// @custom:audit none This contracts is not yet audited.
/// @title SuperchainConfig
/// @notice The SuperchainConfig contract is used to manage configuration of global superchain values.
contract SuperchainConfig is Initializable, ISemver {
    /// @notice Enum representing different types of updates.
    /// @custom:value GUARDIAN            Represents an update to the guardian.
    enum UpdateType {
        GUARDIAN
    }

    /// @notice Whether or not the Superchain is paused.
    bytes32 public constant PAUSED_SLOT = bytes32(uint256(keccak256("superchainConfig.paused")) - 1);

    /// @notice The address of the guardian, which can pause withdrawals from the System.
    ///         It can only be modified by an upgrade.
    bytes32 public constant GUARDIAN_SLOT = bytes32(uint256(keccak256("superchainConfig.guardian")) - 1);

    /// @notice Emitted when the pause is triggered.
    /// @param identifier A string helping to identify provenance of the pause transaction.
    event Paused(string identifier);

    /// @notice Emitted when the pause is lifted.
    event Unpaused();

    /// @notice Emitted when configuration is updated.
    /// @param updateType Type of update.
    /// @param data       Encoded update data.
    event ConfigUpdate(UpdateType indexed updateType, bytes data);

    /// @notice Semantic version.
    /// @custom:semver 1.1.0
    string public constant version = "1.1.0";

    /// @notice Constructs the SuperchainConfig contract.
    constructor() {
        initialize({ _guardian: address(0), _paused: false });
    }

    /// @notice Initializer.
    /// @param _guardian    Address of the guardian, can pause the OptimismPortal.
    /// @param _paused      Initial paused status.
    function initialize(address _guardian, bool _paused) public initializer {
        _setGuardian(_guardian);
        if (_paused) {
            _pause("Initializer paused");
        }
    }

    /// @notice Getter for the guardian address.
    function guardian() public view returns (address guardian_) {
        guardian_ = Storage.getAddress(GUARDIAN_SLOT);
    }

    /// @notice Getter for the current paused status.
    function paused() public view returns (bool paused_) {
        paused_ = Storage.getBool(PAUSED_SLOT);
    }

    /// @notice Pauses withdrawals.
    /// @param _identifier (Optional) A string to identify provenance of the pause transaction.
    function pause(string memory _identifier) external {
        require(msg.sender == guardian(), "SuperchainConfig: only guardian can pause");
        _pause(_identifier);
    }

    /// @notice Pauses withdrawals.
    /// @param _identifier (Optional) A string to identify provenance of the pause transaction.
    function _pause(string memory _identifier) internal {
        Storage.setBool(PAUSED_SLOT, true);
        emit Paused(_identifier);
    }

    /// @notice Unpauses withdrawals.
    function unpause() external {
        require(msg.sender == guardian(), "SuperchainConfig: only guardian can unpause");
        Storage.setBool(PAUSED_SLOT, false);
        emit Unpaused();
    }

    /// @notice Sets the guardian address. This is only callable during initialization, so an upgrade
    ///         will be required to change the guardian.
    /// @param _guardian The new guardian address.
    function _setGuardian(address _guardian) internal {
        Storage.setAddress(GUARDIAN_SLOT, _guardian);
        emit ConfigUpdate(UpdateType.GUARDIAN, abi.encode(_guardian));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { ResourceMetering } from "src/L1/ResourceMetering.sol";

/// @title Constants
/// @notice Constants is a library for storing constants. Simple! Don't put everything in here, just
///         the stuff used in multiple contracts. Constants that only apply to a single contract
///         should be defined in that contract instead.
library Constants {
    /// @notice Special address to be used as the tx origin for gas estimation calls in the
    ///         OptimismPortal and CrossDomainMessenger calls. You only need to use this address if
    ///         the minimum gas limit specified by the user is not actually enough to execute the
    ///         given message and you're attempting to estimate the actual necessary gas limit. We
    ///         use address(1) because it's the ecrecover precompile and therefore guaranteed to
    ///         never have any code on any EVM chain.
    address internal constant ESTIMATION_ADDRESS = address(1);

    /// @notice Value used for the L2 sender storage slot in both the OptimismPortal and the
    ///         CrossDomainMessenger contracts before an actual sender is set. This value is
    ///         non-zero to reduce the gas cost of message passing transactions.
    address internal constant DEFAULT_L2_SENDER = 0x000000000000000000000000000000000000dEaD;

    /// @notice The storage slot that holds the address of a proxy implementation.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)`
    bytes32 internal constant PROXY_IMPLEMENTATION_ADDRESS =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /// @notice The storage slot that holds the address of the owner.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)`
    bytes32 internal constant PROXY_OWNER_ADDRESS = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /// @notice Returns the default values for the ResourceConfig. These are the recommended values
    ///         for a production network.
    function DEFAULT_RESOURCE_CONFIG() internal pure returns (ResourceMetering.ResourceConfig memory) {
        ResourceMetering.ResourceConfig memory config = ResourceMetering.ResourceConfig({
            maxResourceLimit: 20_000_000,
            elasticityMultiplier: 10,
            baseFeeMaxChangeDenominator: 8,
            minimumBaseFee: 1 gwei,
            systemTxMaxGas: 1_000_000,
            maximumBaseFee: type(uint128).max
        });
        return config;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.2) (utils/introspection/ERC165Checker.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            _supportsERC165Interface(account, type(IERC165).interfaceId) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
        internal
        view
        returns (bool[] memory)
    {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        // prepare call
        bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);

        // perform static call
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly {
            success := staticcall(30000, account, add(encodedParams, 0x20), mload(encodedParams), 0x00, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0x00)
        }

        return success && returnSize >= 0x20 && returnValue > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

/// @title SafeCall
/// @notice Perform low level safe calls
library SafeCall {
    /// @notice Performs a low level call without copying any returndata.
    /// @dev Passes no calldata to the call context.
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _gas, uint256 _value) internal returns (bool) {
        bool _success;
        assembly {
            _success :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    0, // inloc
                    0, // inlen
                    0, // outloc
                    0 // outlen
                )
        }
        return _success;
    }

    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, uint256 _gas, uint256 _value, bytes memory _calldata) internal returns (bool) {
        bool _success;
        assembly {
            _success :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0, // outloc
                    0 // outlen
                )
        }
        return _success;
    }

    /// @notice Helper function to determine if there is sufficient gas remaining within the context
    ///         to guarantee that the minimum gas requirement for a call will be met as well as
    ///         optionally reserving a specified amount of gas for after the call has concluded.
    /// @param _minGas      The minimum amount of gas that may be passed to the target context.
    /// @param _reservedGas Optional amount of gas to reserve for the caller after the execution
    ///                     of the target context.
    /// @return `true` if there is enough gas remaining to safely supply `_minGas` to the target
    ///         context as well as reserve `_reservedGas` for the caller after the execution of
    ///         the target context.
    /// @dev !!!!! FOOTGUN ALERT !!!!!
    ///      1.) The 40_000 base buffer is to account for the worst case of the dynamic cost of the
    ///          `CALL` opcode's `address_access_cost`, `positive_value_cost`, and
    ///          `value_to_empty_account_cost` factors with an added buffer of 5,700 gas. It is
    ///          still possible to self-rekt by initiating a withdrawal with a minimum gas limit
    ///          that does not account for the `memory_expansion_cost` & `code_execution_cost`
    ///          factors of the dynamic cost of the `CALL` opcode.
    ///      2.) This function should *directly* precede the external call if possible. There is an
    ///          added buffer to account for gas consumed between this check and the call, but it
    ///          is only 5,700 gas.
    ///      3.) Because EIP-150 ensures that a maximum of 63/64ths of the remaining gas in the call
    ///          frame may be passed to a subcontext, we need to ensure that the gas will not be
    ///          truncated.
    ///      4.) Use wisely. This function is not a silver bullet.
    function hasMinGas(uint256 _minGas, uint256 _reservedGas) internal view returns (bool) {
        bool _hasMinGas;
        assembly {
            // Equation: gas × 63 ≥ minGas × 64 + 63(40_000 + reservedGas)
            _hasMinGas := iszero(lt(mul(gas(), 63), add(mul(_minGas, 64), mul(add(40000, _reservedGas), 63))))
        }
        return _hasMinGas;
    }

    /// @notice Perform a low level call without copying any returndata. This function
    ///         will revert if the call cannot be performed with the specified minimum
    ///         gas.
    /// @param _target   Address to call
    /// @param _minGas   The minimum amount of gas that may be passed to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function callWithMinGas(
        address _target,
        uint256 _minGas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool)
    {
        bool _success;
        bool _hasMinGas = hasMinGas(_minGas, 0);
        assembly {
            // Assertion: gasleft() >= (_minGas * 64) / 63 + 40_000
            if iszero(_hasMinGas) {
                // Store the "Error(string)" selector in scratch space.
                mstore(0, 0x08c379a0)
                // Store the pointer to the string length in scratch space.
                mstore(32, 32)
                // Store the string.
                //
                // SAFETY:
                // - We pad the beginning of the string with two zero bytes as well as the
                // length (24) to ensure that we override the free memory pointer at offset
                // 0x40. This is necessary because the free memory pointer is likely to
                // be greater than 1 byte when this function is called, but it is incredibly
                // unlikely that it will be greater than 3 bytes. As for the data within
                // 0x60, it is ensured that it is 0 due to 0x60 being the zero offset.
                // - It's fine to clobber the free memory pointer, we're reverting.
                mstore(88, 0x0000185361666543616c6c3a204e6f7420656e6f75676820676173)

                // Revert with 'Error("SafeCall: Not enough gas")'
                revert(28, 100)
            }

            // The call will be supplied at least ((_minGas * 64) / 63) gas due to the
            // above assertion. This ensures that, in all circumstances (except for when the
            // `_minGas` does not account for the `memory_expansion_cost` and `code_execution_cost`
            // factors of the dynamic cost of the `CALL` opcode), the call will receive at least
            // the minimum amount of gas specified.
            _success :=
                call(
                    gas(), // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0x00, // outloc
                    0x00 // outlen
                )
        }
        return _success;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";

/// @title IOptimismMintableERC20
/// @notice This interface is available on the OptimismMintableERC20 contract.
///         We declare it as a separate interface so that it can be used in
///         custom implementations of OptimismMintableERC20.
interface IOptimismMintableERC20 is IERC165 {
    function remoteToken() external view returns (address);

    function bridge() external returns (address);

    function mint(address _to, uint256 _amount) external;

    function burn(address _from, uint256 _amount) external;
}

/// @custom:legacy
/// @title ILegacyMintableERC20
/// @notice This interface was available on the legacy L2StandardERC20 contract.
///         It remains available on the OptimismMintableERC20 contract for
///         backwards compatibility.
interface ILegacyMintableERC20 is IERC165 {
    function l1Token() external view returns (address);

    function mint(address _to, uint256 _amount) external;

    function burn(address _from, uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import { ILegacyMintableERC20, IOptimismMintableERC20 } from "src/universal/IOptimismMintableERC20.sol";
import { ISemver } from "src/universal/ISemver.sol";

/// @title OptimismMintableERC20
/// @notice OptimismMintableERC20 is a standard extension of the base ERC20 token contract designed
///         to allow the StandardBridge contracts to mint and burn tokens. This makes it possible to
///         use an OptimismMintablERC20 as the L2 representation of an L1 token, or vice-versa.
///         Designed to be backwards compatible with the older StandardL2ERC20 token which was only
///         meant for use on L2.
contract OptimismMintableERC20 is IOptimismMintableERC20, ILegacyMintableERC20, ERC20, ISemver {
    /// @notice Address of the corresponding version of this token on the remote chain.
    address public immutable REMOTE_TOKEN;

    /// @notice Address of the StandardBridge on this network.
    address public immutable BRIDGE;

    /// @notice Decimals of the token
    uint8 private immutable DECIMALS;

    /// @notice Emitted whenever tokens are minted for an account.
    /// @param account Address of the account tokens are being minted for.
    /// @param amount  Amount of tokens minted.
    event Mint(address indexed account, uint256 amount);

    /// @notice Emitted whenever tokens are burned from an account.
    /// @param account Address of the account tokens are being burned from.
    /// @param amount  Amount of tokens burned.
    event Burn(address indexed account, uint256 amount);

    /// @notice A modifier that only allows the bridge to call
    modifier onlyBridge() {
        require(msg.sender == BRIDGE, "OptimismMintableERC20: only bridge can mint and burn");
        _;
    }

    /// @notice Semantic version.
    /// @custom:semver 1.3.0
    string public constant version = "1.3.0";

    /// @param _bridge      Address of the L2 standard bridge.
    /// @param _remoteToken Address of the corresponding L1 token.
    /// @param _name        ERC20 name.
    /// @param _symbol      ERC20 symbol.
    constructor(
        address _bridge,
        address _remoteToken,
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    )
        ERC20(_name, _symbol)
    {
        REMOTE_TOKEN = _remoteToken;
        BRIDGE = _bridge;
        DECIMALS = _decimals;
    }

    /// @notice Allows the StandardBridge on this network to mint tokens.
    /// @param _to     Address to mint tokens to.
    /// @param _amount Amount of tokens to mint.
    function mint(
        address _to,
        uint256 _amount
    )
        external
        virtual
        override(IOptimismMintableERC20, ILegacyMintableERC20)
        onlyBridge
    {
        _mint(_to, _amount);
        emit Mint(_to, _amount);
    }

    /// @notice Allows the StandardBridge on this network to burn tokens.
    /// @param _from   Address to burn tokens from.
    /// @param _amount Amount of tokens to burn.
    function burn(
        address _from,
        uint256 _amount
    )
        external
        virtual
        override(IOptimismMintableERC20, ILegacyMintableERC20)
        onlyBridge
    {
        _burn(_from, _amount);
        emit Burn(_from, _amount);
    }

    /// @notice ERC165 interface check function.
    /// @param _interfaceId Interface ID to check.
    /// @return Whether or not the interface is supported by this contract.
    function supportsInterface(bytes4 _interfaceId) external pure virtual returns (bool) {
        bytes4 iface1 = type(IERC165).interfaceId;
        // Interface corresponding to the legacy L2StandardERC20.
        bytes4 iface2 = type(ILegacyMintableERC20).interfaceId;
        // Interface corresponding to the updated OptimismMintableERC20 (this contract).
        bytes4 iface3 = type(IOptimismMintableERC20).interfaceId;
        return _interfaceId == iface1 || _interfaceId == iface2 || _interfaceId == iface3;
    }

    /// @custom:legacy
    /// @notice Legacy getter for the remote token. Use REMOTE_TOKEN going forward.
    function l1Token() public view returns (address) {
        return REMOTE_TOKEN;
    }

    /// @custom:legacy
    /// @notice Legacy getter for the bridge. Use BRIDGE going forward.
    function l2Bridge() public view returns (address) {
        return BRIDGE;
    }

    /// @custom:legacy
    /// @notice Legacy getter for REMOTE_TOKEN.
    function remoteToken() public view returns (address) {
        return REMOTE_TOKEN;
    }

    /// @custom:legacy
    /// @notice Legacy getter for BRIDGE.
    function bridge() public view returns (address) {
        return BRIDGE;
    }

    /// @dev Returns the number of decimals used to get its user representation.
    /// For example, if `decimals` equals `2`, a balance of `505` tokens should
    /// be displayed to a user as `5.05` (`505 / 10 ** 2`).
    /// NOTE: This information is only used for _display_ purposes: it in
    /// no way affects any of the arithmetic of the contract, including
    /// {IERC20-balanceOf} and {IERC20-transfer}.
    function decimals() public view override returns (uint8) {
        return DECIMALS;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/Address.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { Types } from "src/libraries/Types.sol";
import { Encoding } from "src/libraries/Encoding.sol";

/// @title Hashing
/// @notice Hashing handles Optimism's various different hashing schemes.
library Hashing {
    /// @notice Computes the hash of the RLP encoded L2 transaction that would be generated when a
    ///         given deposit is sent to the L2 system. Useful for searching for a deposit in the L2
    ///         system.
    /// @param _tx User deposit transaction to hash.
    /// @return Hash of the RLP encoded L2 deposit transaction.
    function hashDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(Encoding.encodeDepositTransaction(_tx));
    }

    /// @notice Computes the deposit transaction's "source hash", a value that guarantees the hash
    ///         of the L2 transaction that corresponds to a deposit is unique and is
    ///         deterministically generated from L1 transaction data.
    /// @param _l1BlockHash Hash of the L1 block where the deposit was included.
    /// @param _logIndex    The index of the log that created the deposit transaction.
    /// @return Hash of the deposit transaction's "source hash".
    function hashDepositSource(bytes32 _l1BlockHash, uint256 _logIndex) internal pure returns (bytes32) {
        bytes32 depositId = keccak256(abi.encode(_l1BlockHash, _logIndex));
        return keccak256(abi.encode(bytes32(0), depositId));
    }

    /// @notice Hashes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        (, uint16 version) = Encoding.decodeVersionedNonce(_nonce);
        if (version == 0) {
            return hashCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return hashCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Hashing: unknown cross domain message version");
        }
    }

    /// @notice Hashes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV0(_target, _sender, _data, _nonce));
    }

    /// @notice Hashes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data));
    }

    /// @notice Derives the withdrawal hash according to the encoding in the L2 Withdrawer contract
    /// @param _tx Withdrawal transaction to hash.
    /// @return Hashed withdrawal transaction.
    function hashWithdrawal(Types.WithdrawalTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(abi.encode(_tx.nonce, _tx.sender, _tx.target, _tx.value, _tx.gasLimit, _tx.data));
    }

    /// @notice Hashes the various elements of an output root proof into an output root hash which
    ///         can be used to check if the proof is valid.
    /// @param _outputRootProof Output root proof which should hash to an output root.
    /// @return Hashed output root proof.
    function hashOutputRootProof(Types.OutputRootProof memory _outputRootProof) internal pure returns (bytes32) {
        return keccak256(
            abi.encode(
                _outputRootProof.version,
                _outputRootProof.stateRoot,
                _outputRootProof.messagePasserStorageRoot,
                _outputRootProof.latestBlockhash
            )
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { Types } from "src/libraries/Types.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { RLPWriter } from "src/libraries/rlp/RLPWriter.sol";

/// @title Encoding
/// @notice Encoding handles Optimism's various different encoding schemes.
library Encoding {
    /// @notice RLP encodes the L2 transaction that would be generated when a given deposit is sent
    ///         to the L2 system. Useful for searching for a deposit in the L2 system. The
    ///         transaction is prefixed with 0x7e to identify its EIP-2718 type.
    /// @param _tx User deposit transaction to encode.
    /// @return RLP encoded L2 deposit transaction.
    function encodeDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes memory) {
        bytes32 source = Hashing.hashDepositSource(_tx.l1BlockHash, _tx.logIndex);
        bytes[] memory raw = new bytes[](8);
        raw[0] = RLPWriter.writeBytes(abi.encodePacked(source));
        raw[1] = RLPWriter.writeAddress(_tx.from);
        raw[2] = _tx.isCreation ? RLPWriter.writeBytes("") : RLPWriter.writeAddress(_tx.to);
        raw[3] = RLPWriter.writeUint(_tx.mint);
        raw[4] = RLPWriter.writeUint(_tx.value);
        raw[5] = RLPWriter.writeUint(uint256(_tx.gasLimit));
        raw[6] = RLPWriter.writeBool(false);
        raw[7] = RLPWriter.writeBytes(_tx.data);
        return abi.encodePacked(uint8(0x7e), RLPWriter.writeList(raw));
    }

    /// @notice Encodes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        (, uint16 version) = decodeVersionedNonce(_nonce);
        if (version == 0) {
            return encodeCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Encoding: unknown cross domain message version");
        }
    }

    /// @notice Encodes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSignature("relayMessage(address,address,bytes,uint256)", _target, _sender, _data, _nonce);
    }

    /// @notice Encodes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSignature(
            "relayMessage(uint256,address,address,uint256,uint256,bytes)",
            _nonce,
            _sender,
            _target,
            _value,
            _gasLimit,
            _data
        );
    }

    /// @notice Adds a version number into the first two bytes of a message nonce.
    /// @param _nonce   Message nonce to encode into.
    /// @param _version Version number to encode into the message nonce.
    /// @return Message nonce with version encoded into the first two bytes.
    function encodeVersionedNonce(uint240 _nonce, uint16 _version) internal pure returns (uint256) {
        uint256 nonce;
        assembly {
            nonce := or(shl(240, _version), _nonce)
        }
        return nonce;
    }

    /// @notice Pulls the version out of a version-encoded nonce.
    /// @param _nonce Message nonce with version encoded into the first two bytes.
    /// @return Nonce without encoded version.
    /// @return Version of the message.
    function decodeVersionedNonce(uint256 _nonce) internal pure returns (uint240, uint16) {
        uint240 nonce;
        uint16 version;
        assembly {
            nonce := and(_nonce, 0x0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            version := shr(240, _nonce)
        }
        return (nonce, version);
    }

    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesEcotone
    /// @param baseFeeScalar       L1 base fee Scalar
    /// @param blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param sequenceNumber      Number of L2 blocks since epoch start.
    /// @param timestamp           L1 timestamp.
    /// @param number              L1 blocknumber.
    /// @param baseFee             L1 base fee.
    /// @param blobBaseFee         L1 blob base fee.
    /// @param hash                L1 blockhash.
    /// @param batcherHash         Versioned hash to authenticate batcher by.
    function encodeSetL1BlockValuesEcotone(
        uint32 baseFeeScalar,
        uint32 blobBaseFeeScalar,
        uint64 sequenceNumber,
        uint64 timestamp,
        uint64 number,
        uint256 baseFee,
        uint256 blobBaseFee,
        bytes32 hash,
        bytes32 batcherHash
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesEcotone()"));
        return abi.encodePacked(
            functionSignature,
            baseFeeScalar,
            blobBaseFeeScalar,
            sequenceNumber,
            timestamp,
            number,
            baseFee,
            blobBaseFee,
            hash,
            batcherHash
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Storage
/// @notice Storage handles reading and writing to arbitary storage locations
library Storage {
    /// @notice Returns an address stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getAddress(bytes32 _slot) internal view returns (address addr_) {
        assembly {
            addr_ := sload(_slot)
        }
    }

    /// @notice Stores an address in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _address The protocol version to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting addresses
    ///      in arbitrary storage slots.
    function setAddress(bytes32 _slot, address _address) internal {
        assembly {
            sstore(_slot, _address)
        }
    }

    /// @notice Returns a uint256 stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getUint(bytes32 _slot) internal view returns (uint256 value_) {
        assembly {
            value_ := sload(_slot)
        }
    }

    /// @notice Stores a value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _value The protocol version to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setUint(bytes32 _slot, uint256 _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Returns a bytes32 stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getBytes32(bytes32 _slot) internal view returns (bytes32 value_) {
        assembly {
            value_ := sload(_slot)
        }
    }

    /// @notice Stores a bytes32 value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _value The bytes32 value to store.
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setBytes32(bytes32 _slot, bytes32 _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Stores a bool value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the bool in.
    /// @param _value The bool value to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setBool(bytes32 _slot, bool _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Returns a bool stored in an arbitrary storage slot.
    /// @param _slot The storage slot to retrieve the bool from.
    function getBool(bytes32 _slot) internal view returns (bool value_) {
        assembly {
            value_ := sload(_slot)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { Burn } from "src/libraries/Burn.sol";
import { Arithmetic } from "src/libraries/Arithmetic.sol";

/// @custom:upgradeable
/// @title ResourceMetering
/// @notice ResourceMetering implements an EIP-1559 style resource metering system where pricing
///         updates automatically based on current demand.
abstract contract ResourceMetering is Initializable {
    /// @notice Represents the various parameters that control the way in which resources are
    ///         metered. Corresponds to the EIP-1559 resource metering system.
    /// @custom:field prevBaseFee   Base fee from the previous block(s).
    /// @custom:field prevBoughtGas Amount of gas bought so far in the current block.
    /// @custom:field prevBlockNum  Last block number that the base fee was updated.
    struct ResourceParams {
        uint128 prevBaseFee;
        uint64 prevBoughtGas;
        uint64 prevBlockNum;
    }

    /// @notice Represents the configuration for the EIP-1559 based curve for the deposit gas
    ///         market. These values should be set with care as it is possible to set them in
    ///         a way that breaks the deposit gas market. The target resource limit is defined as
    ///         maxResourceLimit / elasticityMultiplier. This struct was designed to fit within a
    ///         single word. There is additional space for additions in the future.
    /// @custom:field maxResourceLimit             Represents the maximum amount of deposit gas that
    ///                                            can be purchased per block.
    /// @custom:field elasticityMultiplier         Determines the target resource limit along with
    ///                                            the resource limit.
    /// @custom:field baseFeeMaxChangeDenominator  Determines max change on fee per block.
    /// @custom:field minimumBaseFee               The min deposit base fee, it is clamped to this
    ///                                            value.
    /// @custom:field systemTxMaxGas               The amount of gas supplied to the system
    ///                                            transaction. This should be set to the same
    ///                                            number that the op-node sets as the gas limit
    ///                                            for the system transaction.
    /// @custom:field maximumBaseFee               The max deposit base fee, it is clamped to this
    ///                                            value.
    struct ResourceConfig {
        uint32 maxResourceLimit;
        uint8 elasticityMultiplier;
        uint8 baseFeeMaxChangeDenominator;
        uint32 minimumBaseFee;
        uint32 systemTxMaxGas;
        uint128 maximumBaseFee;
    }

    /// @notice EIP-1559 style gas parameters.
    ResourceParams public params;

    /// @notice Reserve extra slots (to a total of 50) in the storage layout for future upgrades.
    uint256[48] private __gap;

    /// @notice Meters access to a function based an amount of a requested resource.
    /// @param _amount Amount of the resource requested.
    modifier metered(uint64 _amount) {
        // Record initial gas amount so we can refund for it later.
        uint256 initialGas = gasleft();

        // Run the underlying function.
        _;

        // Run the metering function.
        _metered(_amount, initialGas);
    }

    /// @notice An internal function that holds all of the logic for metering a resource.
    /// @param _amount     Amount of the resource requested.
    /// @param _initialGas The amount of gas before any modifier execution.
    function _metered(uint64 _amount, uint256 _initialGas) internal {
        // Update block number and base fee if necessary.
        uint256 blockDiff = block.number - params.prevBlockNum;

        ResourceConfig memory config = _resourceConfig();
        int256 targetResourceLimit =
            int256(uint256(config.maxResourceLimit)) / int256(uint256(config.elasticityMultiplier));

        if (blockDiff > 0) {
            // Handle updating EIP-1559 style gas parameters. We use EIP-1559 to restrict the rate
            // at which deposits can be created and therefore limit the potential for deposits to
            // spam the L2 system. Fee scheme is very similar to EIP-1559 with minor changes.
            int256 gasUsedDelta = int256(uint256(params.prevBoughtGas)) - targetResourceLimit;
            int256 baseFeeDelta = (int256(uint256(params.prevBaseFee)) * gasUsedDelta)
                / (targetResourceLimit * int256(uint256(config.baseFeeMaxChangeDenominator)));

            // Update base fee by adding the base fee delta and clamp the resulting value between
            // min and max.
            int256 newBaseFee = Arithmetic.clamp({
                _value: int256(uint256(params.prevBaseFee)) + baseFeeDelta,
                _min: int256(uint256(config.minimumBaseFee)),
                _max: int256(uint256(config.maximumBaseFee))
            });

            // If we skipped more than one block, we also need to account for every empty block.
            // Empty block means there was no demand for deposits in that block, so we should
            // reflect this lack of demand in the fee.
            if (blockDiff > 1) {
                // Update the base fee by repeatedly applying the exponent 1-(1/change_denominator)
                // blockDiff - 1 times. Simulates multiple empty blocks. Clamp the resulting value
                // between min and max.
                newBaseFee = Arithmetic.clamp({
                    _value: Arithmetic.cdexp({
                        _coefficient: newBaseFee,
                        _denominator: int256(uint256(config.baseFeeMaxChangeDenominator)),
                        _exponent: int256(blockDiff - 1)
                    }),
                    _min: int256(uint256(config.minimumBaseFee)),
                    _max: int256(uint256(config.maximumBaseFee))
                });
            }

            // Update new base fee, reset bought gas, and update block number.
            params.prevBaseFee = uint128(uint256(newBaseFee));
            params.prevBoughtGas = 0;
            params.prevBlockNum = uint64(block.number);
        }

        // Make sure we can actually buy the resource amount requested by the user.
        params.prevBoughtGas += _amount;
        require(
            int256(uint256(params.prevBoughtGas)) <= int256(uint256(config.maxResourceLimit)),
            "ResourceMetering: cannot buy more gas than available gas limit"
        );

        // Determine the amount of ETH to be paid.
        uint256 resourceCost = uint256(_amount) * uint256(params.prevBaseFee);

        // We currently charge for this ETH amount as an L1 gas burn, so we convert the ETH amount
        // into gas by dividing by the L1 base fee. We assume a minimum base fee of 1 gwei to avoid
        // division by zero for L1s that don't support 1559 or to avoid excessive gas burns during
        // periods of extremely low L1 demand. One-day average gas fee hasn't dipped below 1 gwei
        // during any 1 day period in the last 5 years, so should be fine.
        uint256 gasCost = resourceCost / Math.max(block.basefee, 1 gwei);

        // Give the user a refund based on the amount of gas they used to do all of the work up to
        // this point. Since we're at the end of the modifier, this should be pretty accurate. Acts
        // effectively like a dynamic stipend (with a minimum value).
        uint256 usedGas = _initialGas - gasleft();
        if (gasCost > usedGas) {
            Burn.gas(gasCost - usedGas);
        }
    }

    /// @notice Virtual function that returns the resource config.
    ///         Contracts that inherit this contract must implement this function.
    /// @return ResourceConfig
    function _resourceConfig() internal virtual returns (ResourceConfig memory);

    /// @notice Sets initial resource parameter values.
    ///         This function must either be called by the initializer function of an upgradeable
    ///         child contract.
    // solhint-disable-next-line func-name-mixedcase
    function __ResourceMetering_init() internal onlyInitializing {
        if (params.prevBlockNum == 0) {
            params = ResourceParams({ prevBaseFee: 1 gwei, prevBoughtGas: 0, prevBlockNum: uint64(block.number) });
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Types
/// @notice Contains various types used throughout the Optimism contract system.
library Types {
    /// @notice OutputProposal represents a commitment to the L2 state. The timestamp is the L1
    ///         timestamp that the output root is posted. This timestamp is used to verify that the
    ///         finalization period has passed since the output root was submitted.
    /// @custom:field outputRoot    Hash of the L2 output.
    /// @custom:field timestamp     Timestamp of the L1 block that the output root was submitted in.
    /// @custom:field l2BlockNumber L2 block number that the output corresponds to.
    struct OutputProposal {
        bytes32 outputRoot;
        uint128 timestamp;
        uint128 l2BlockNumber;
    }

    /// @notice Struct representing the elements that are hashed together to generate an output root
    ///         which itself represents a snapshot of the L2 state.
    /// @custom:field version                  Version of the output root.
    /// @custom:field stateRoot                Root of the state trie at the block of this output.
    /// @custom:field messagePasserStorageRoot Root of the message passer storage trie.
    /// @custom:field latestBlockhash          Hash of the block this output was generated from.
    struct OutputRootProof {
        bytes32 version;
        bytes32 stateRoot;
        bytes32 messagePasserStorageRoot;
        bytes32 latestBlockhash;
    }

    /// @notice Struct representing a deposit transaction (L1 => L2 transaction) created by an end
    ///         user (as opposed to a system deposit transaction generated by the system).
    /// @custom:field from        Address of the sender of the transaction.
    /// @custom:field to          Address of the recipient of the transaction.
    /// @custom:field isCreation  True if the transaction is a contract creation.
    /// @custom:field value       Value to send to the recipient.
    /// @custom:field mint        Amount of ETH to mint.
    /// @custom:field gasLimit    Gas limit of the transaction.
    /// @custom:field data        Data of the transaction.
    /// @custom:field l1BlockHash Hash of the block the transaction was submitted in.
    /// @custom:field logIndex    Index of the log in the block the transaction was submitted in.
    struct UserDepositTransaction {
        address from;
        address to;
        bool isCreation;
        uint256 value;
        uint256 mint;
        uint64 gasLimit;
        bytes data;
        bytes32 l1BlockHash;
        uint256 logIndex;
    }

    /// @notice Struct representing a withdrawal transaction.
    /// @custom:field nonce    Nonce of the withdrawal transaction
    /// @custom:field sender   Address of the sender of the transaction.
    /// @custom:field target   Address of the recipient of the transaction.
    /// @custom:field value    Value to send to the recipient.
    /// @custom:field gasLimit Gas limit of the transaction.
    /// @custom:field data     Data of the transaction.
    struct WithdrawalTransaction {
        uint256 nonce;
        address sender;
        address target;
        uint256 value;
        uint256 gasLimit;
        bytes data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @custom:attribution https://github.com/bakaoh/solidity-rlp-encode
/// @title RLPWriter
/// @author RLPWriter is a library for encoding Solidity types to RLP bytes. Adapted from Bakaoh's
///         RLPEncode library (https://github.com/bakaoh/solidity-rlp-encode) with minor
///         modifications to improve legibility.
library RLPWriter {
    /// @notice RLP encodes a byte string.
    /// @param _in The byte string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeBytes(bytes memory _in) internal pure returns (bytes memory out_) {
        if (_in.length == 1 && uint8(_in[0]) < 128) {
            out_ = _in;
        } else {
            out_ = abi.encodePacked(_writeLength(_in.length, 128), _in);
        }
    }

    /// @notice RLP encodes a list of RLP encoded byte byte strings.
    /// @param _in The list of RLP encoded byte strings.
    /// @return list_ The RLP encoded list of items in bytes.
    function writeList(bytes[] memory _in) internal pure returns (bytes memory list_) {
        list_ = _flatten(_in);
        list_ = abi.encodePacked(_writeLength(list_.length, 192), list_);
    }

    /// @notice RLP encodes a string.
    /// @param _in The string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeString(string memory _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(bytes(_in));
    }

    /// @notice RLP encodes an address.
    /// @param _in The address to encode.
    /// @return out_ The RLP encoded address in bytes.
    function writeAddress(address _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(abi.encodePacked(_in));
    }

    /// @notice RLP encodes a uint.
    /// @param _in The uint256 to encode.
    /// @return out_ The RLP encoded uint256 in bytes.
    function writeUint(uint256 _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(_toBinary(_in));
    }

    /// @notice RLP encodes a bool.
    /// @param _in The bool to encode.
    /// @return out_ The RLP encoded bool in bytes.
    function writeBool(bool _in) internal pure returns (bytes memory out_) {
        out_ = new bytes(1);
        out_[0] = (_in ? bytes1(0x01) : bytes1(0x80));
    }

    /// @notice Encode the first byte and then the `len` in binary form if `length` is more than 55.
    /// @param _len    The length of the string or the payload.
    /// @param _offset 128 if item is string, 192 if item is list.
    /// @return out_ RLP encoded bytes.
    function _writeLength(uint256 _len, uint256 _offset) private pure returns (bytes memory out_) {
        if (_len < 56) {
            out_ = new bytes(1);
            out_[0] = bytes1(uint8(_len) + uint8(_offset));
        } else {
            uint256 lenLen;
            uint256 i = 1;
            while (_len / i != 0) {
                lenLen++;
                i *= 256;
            }

            out_ = new bytes(lenLen + 1);
            out_[0] = bytes1(uint8(lenLen) + uint8(_offset) + 55);
            for (i = 1; i <= lenLen; i++) {
                out_[i] = bytes1(uint8((_len / (256 ** (lenLen - i))) % 256));
            }
        }
    }

    /// @notice Encode integer in big endian binary form with no leading zeroes.
    /// @param _x The integer to encode.
    /// @return out_ RLP encoded bytes.
    function _toBinary(uint256 _x) private pure returns (bytes memory out_) {
        bytes memory b = abi.encodePacked(_x);

        uint256 i = 0;
        for (; i < 32; i++) {
            if (b[i] != 0) {
                break;
            }
        }

        out_ = new bytes(32 - i);
        for (uint256 j = 0; j < out_.length; j++) {
            out_[j] = b[i++];
        }
    }

    /// @custom:attribution https://github.com/Arachnid/solidity-stringutils
    /// @notice Copies a piece of memory to another location.
    /// @param _dest Destination location.
    /// @param _src  Source location.
    /// @param _len  Length of memory to copy.
    function _memcpy(uint256 _dest, uint256 _src, uint256 _len) private pure {
        uint256 dest = _dest;
        uint256 src = _src;
        uint256 len = _len;

        for (; len >= 32; len -= 32) {
            assembly {
                mstore(dest, mload(src))
            }
            dest += 32;
            src += 32;
        }

        uint256 mask;
        unchecked {
            mask = 256 ** (32 - len) - 1;
        }
        assembly {
            let srcpart := and(mload(src), not(mask))
            let destpart := and(mload(dest), mask)
            mstore(dest, or(destpart, srcpart))
        }
    }

    /// @custom:attribution https://github.com/sammayo/solidity-rlp-encoder
    /// @notice Flattens a list of byte strings into one byte string.
    /// @param _list List of byte strings to flatten.
    /// @return out_ The flattened byte string.
    function _flatten(bytes[] memory _list) private pure returns (bytes memory out_) {
        if (_list.length == 0) {
            return new bytes(0);
        }

        uint256 len;
        uint256 i = 0;
        for (; i < _list.length; i++) {
            len += _list[i].length;
        }

        out_ = new bytes(len);
        uint256 flattenedPtr;
        assembly {
            flattenedPtr := add(out_, 0x20)
        }

        for (i = 0; i < _list.length; i++) {
            bytes memory item = _list[i];

            uint256 listPtr;
            assembly {
                listPtr := add(item, 0x20)
            }

            _memcpy(flattenedPtr, listPtr, item.length);
            flattenedPtr += _list[i].length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
        // good first aproximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

/// @title Burn
/// @notice Utilities for burning stuff.
library Burn {
    /// @notice Burns a given amount of ETH.
    /// @param _amount Amount of ETH to burn.
    function eth(uint256 _amount) internal {
        new Burner{ value: _amount }();
    }

    /// @notice Burns a given amount of gas.
    /// @param _amount Amount of gas to burn.
    function gas(uint256 _amount) internal view {
        uint256 i = 0;
        uint256 initialGas = gasleft();
        while (initialGas - gasleft() < _amount) {
            ++i;
        }
    }
}

/// @title Burner
/// @notice Burner self-destructs on creation and sends all ETH to itself, removing all ETH given to
///         the contract from the circulating supply. Self-destructing is the only way to remove ETH
///         from the circulating supply.
contract Burner {
    constructor() payable {
        selfdestruct(payable(address(this)));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { SignedMath } from "@openzeppelin/contracts/utils/math/SignedMath.sol";
import { FixedPointMathLib } from "@rari-capital/solmate/src/utils/FixedPointMathLib.sol";

/// @title Arithmetic
/// @notice Even more math than before.
library Arithmetic {
    /// @notice Clamps a value between a minimum and maximum.
    /// @param _value The value to clamp.
    /// @param _min   The minimum value.
    /// @param _max   The maximum value.
    /// @return The clamped value.
    function clamp(int256 _value, int256 _min, int256 _max) internal pure returns (int256) {
        return SignedMath.min(SignedMath.max(_value, _min), _max);
    }

    /// @notice (c)oefficient (d)enominator (exp)onentiation function.
    ///         Returns the result of: c * (1 - 1/d)^exp.
    /// @param _coefficient Coefficient of the function.
    /// @param _denominator Fractional denominator.
    /// @param _exponent    Power function exponent.
    /// @return Result of c * (1 - 1/d)^exp.
    function cdexp(int256 _coefficient, int256 _denominator, int256 _exponent) internal pure returns (int256) {
        return (_coefficient * (FixedPointMathLib.powWad(1e18 - (1e18 / _denominator), _exponent * 1e18))) / 1e18;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;

/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/FixedPointMathLib.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.

    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }

    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }

    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }

    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }

    function powWad(int256 x, int256 y) internal pure returns (int256) {
        // Equivalent to x to the power of y because x ** y = (e ** ln(x)) ** y = e ** (ln(x) * y)
        return expWad((lnWad(x) * y) / int256(WAD)); // Using ln(x) means x must be greater than 0.
    }

    function expWad(int256 x) internal pure returns (int256 r) {
        unchecked {
            // When the result is < 0.5 we return zero. This happens when
            // x <= floor(log(0.5e18) * 1e18) ~ -42e18
            if (x <= -42139678854452767551) return 0;

            // When the result is > (2**255 - 1) / 1e18 we can not represent it as an
            // int. This happens when x >= floor(log((2**255 - 1) / 1e18) * 1e18) ~ 135.
            if (x >= 135305999368893231589) revert("EXP_OVERFLOW");

            // x is now in the range (-42, 136) * 1e18. Convert to (-42, 136) * 2**96
            // for more intermediate precision and a binary basis. This base conversion
            // is a multiplication by 1e18 / 2**96 = 5**18 / 2**78.
            x = (x << 78) / 5**18;

            // Reduce range of x to (-½ ln 2, ½ ln 2) * 2**96 by factoring out powers
            // of two such that exp(x) = exp(x') * 2**k, where k is an integer.
            // Solving this gives k = round(x / log(2)) and x' = x - k * log(2).
            int256 k = ((x << 96) / 54916777467707473351141471128 + 2**95) >> 96;
            x = x - k * 54916777467707473351141471128;

            // k is in the range [-61, 195].

            // Evaluate using a (6, 7)-term rational approximation.
            // p is made monic, we'll multiply by a scale factor later.
            int256 y = x + 1346386616545796478920950773328;
            y = ((y * x) >> 96) + 57155421227552351082224309758442;
            int256 p = y + x - 94201549194550492254356042504812;
            p = ((p * y) >> 96) + 28719021644029726153956944680412240;
            p = p * x + (4385272521454847904659076985693276 << 96);

            // We leave p in 2**192 basis so we don't need to scale it back up for the division.
            int256 q = x - 2855989394907223263936484059900;
            q = ((q * x) >> 96) + 50020603652535783019961831881945;
            q = ((q * x) >> 96) - 533845033583426703283633433725380;
            q = ((q * x) >> 96) + 3604857256930695427073651918091429;
            q = ((q * x) >> 96) - 14423608567350463180887372962807573;
            q = ((q * x) >> 96) + 26449188498355588339934803723976023;

            assembly {
                // Div in assembly because solidity adds a zero check despite the unchecked.
                // The q polynomial won't have zeros in the domain as all its roots are complex.
                // No scaling is necessary because p is already 2**96 too large.
                r := sdiv(p, q)
            }

            // r should be in the range (0.09, 0.25) * 2**96.

            // We now need to multiply r by:
            // * the scale factor s = ~6.031367120.
            // * the 2**k factor from the range reduction.
            // * the 1e18 / 2**96 factor for base conversion.
            // We do this all at once, with an intermediate result in 2**213
            // basis, so the final right shift is always by a positive amount.
            r = int256((uint256(r) * 3822833074963236453042738258902158003155416615667) >> uint256(195 - k));
        }
    }

    function lnWad(int256 x) internal pure returns (int256 r) {
        unchecked {
            require(x > 0, "UNDEFINED");

            // We want to convert x from 10**18 fixed point to 2**96 fixed point.
            // We do this by multiplying by 2**96 / 10**18. But since
            // ln(x * C) = ln(x) + ln(C), we can simply do nothing here
            // and add ln(2**96 / 10**18) at the end.

            // Reduce range of x to (1, 2) * 2**96
            // ln(2^k * x) = k * ln(2) + ln(x)
            int256 k = int256(log2(uint256(x))) - 96;
            x <<= uint256(159 - k);
            x = int256(uint256(x) >> 159);

            // Evaluate using a (8, 8)-term rational approximation.
            // p is made monic, we will multiply by a scale factor later.
            int256 p = x + 3273285459638523848632254066296;
            p = ((p * x) >> 96) + 24828157081833163892658089445524;
            p = ((p * x) >> 96) + 43456485725739037958740375743393;
            p = ((p * x) >> 96) - 11111509109440967052023855526967;
            p = ((p * x) >> 96) - 45023709667254063763336534515857;
            p = ((p * x) >> 96) - 14706773417378608786704636184526;
            p = p * x - (795164235651350426258249787498 << 96);

            // We leave p in 2**192 basis so we don't need to scale it back up for the division.
            // q is monic by convention.
            int256 q = x + 5573035233440673466300451813936;
            q = ((q * x) >> 96) + 71694874799317883764090561454958;
            q = ((q * x) >> 96) + 283447036172924575727196451306956;
            q = ((q * x) >> 96) + 401686690394027663651624208769553;
            q = ((q * x) >> 96) + 204048457590392012362485061816622;
            q = ((q * x) >> 96) + 31853899698501571402653359427138;
            q = ((q * x) >> 96) + 909429971244387300277376558375;
            assembly {
                // Div in assembly because solidity adds a zero check despite the unchecked.
                // The q polynomial is known not to have zeros in the domain.
                // No scaling required because p is already 2**96 too large.
                r := sdiv(p, q)
            }

            // r is in the range (0, 0.125) * 2**96

            // Finalization, we need to:
            // * multiply by the scale factor s = 5.549…
            // * add ln(2**96 / 10**18)
            // * add k * ln(2)
            // * multiply by 10**18 / 2**96 = 5**18 >> 78

            // mul s * 5e18 * 2**96, base is now 5**18 * 2**192
            r *= 1677202110996718588342820967067443963516166;
            // add ln(2) * k * 5e18 * 2**192
            r += 16597577552685614221487285958193947469193820559219878177908093499208371 * k;
            // add ln(2**96 / 10**18) * 5e18 * 2**192
            r += 600920179829731861736702779321621459595472258049074101567377883020018308;
            // base conversion: mul 2**18 / 2**192
            r >>= 174;
        }
    }

    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)

            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }

            // Divide z by the denominator.
            z := div(z, denominator)
        }
    }

    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)

            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }

            // First, divide z - 1 by the denominator and add 1.
            // We allow z - 1 to underflow if z is 0, because we multiply the
            // end result by 0 if z is zero, ensuring we return 0 if z is zero.
            z := mul(iszero(iszero(z)), add(div(sub(z, 1), denominator), 1))
        }
    }

    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }

                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)

                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }

                    // Store x squared.
                    let xx := mul(x, x)

                    // Round to the nearest number.
                    let xxRound := add(xx, half)

                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }

                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)

                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)

                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }

                        // Round to the nearest number.
                        let zxRound := add(zx, half)

                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }

                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }

    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/

    function sqrt(uint256 x) internal pure returns (uint256 z) {
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.

            z := 181 // The "correct" value is 1, but this saves a multiplication later.

            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.

            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }

            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.

            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.

            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.

            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.

            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.

            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))

            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }

    function log2(uint256 x) internal pure returns (uint256 r) {
        require(x > 0, "UNDEFINED");

        assembly {
            r := shl(7, lt(0xffffffffffffffffffffffffffffffff, x))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            r := or(r, shl(2, lt(0xf, shr(r, x))))
            r := or(r, shl(1, lt(0x3, shr(r, x))))
            r := or(r, lt(0x1, shr(r, x)))
        }
    }
}

{
  "remappings": [
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@rari-capital/solmate/=lib/solmate/",
    "@cwia/=lib/clones-with-immutable-args/src/",
    "@lib-keccak/=lib/lib-keccak/contracts/lib/",
    "forge-std/=lib/forge-std/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "safe-contracts/=lib/safe-contracts/contracts/",
    "kontrol-cheatcodes/=lib/kontrol-cheatcodes/src/",
    "solady/=lib/solady/src/",
    "clones-with-immutable-args/=lib/clones-with-immutable-args/src/",
    "lib-keccak/=lib/lib-keccak/contracts/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"localToken","type":"address"},{"indexed":true,"internalType":"address","name":"remoteToken","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ERC20BridgeFinalized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"localToken","type":"address"},{"indexed":true,"internalType":"address","name":"remoteToken","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ERC20BridgeInitiated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"l1Token","type":"address"},{"indexed":true,"internalType":"address","name":"l2Token","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ERC20DepositInitiated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"l1Token","type":"address"},{"indexed":true,"internalType":"address","name":"l2Token","type":"address"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ERC20WithdrawalFinalized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ETHBridgeFinalized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ETHBridgeInitiated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ETHDepositInitiated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"extraData","type":"bytes"}],"name":"ETHWithdrawalFinalized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"inputs":[],"name":"MESSENGER","outputs":[{"internalType":"contract CrossDomainMessenger","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OTHER_BRIDGE","outputs":[{"internalType":"contract StandardBridge","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_localToken","type":"address"},{"internalType":"address","name":"_remoteToken","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"bridgeERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_localToken","type":"address"},{"internalType":"address","name":"_remoteToken","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"bridgeERC20To","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"bridgeETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"bridgeETHTo","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Token","type":"address"},{"internalType":"address","name":"_l2Token","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"depositERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Token","type":"address"},{"internalType":"address","name":"_l2Token","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"depositERC20To","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"depositETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint32","name":"_minGasLimit","type":"uint32"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"depositETHTo","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"deposits","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_localToken","type":"address"},{"internalType":"address","name":"_remoteToken","type":"address"},{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"finalizeBridgeERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"finalizeBridgeETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Token","type":"address"},{"internalType":"address","name":"_l2Token","type":"address"},{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"finalizeERC20Withdrawal","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_extraData","type":"bytes"}],"name":"finalizeETHWithdrawal","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract CrossDomainMessenger","name":"_messenger","type":"address"},{"internalType":"contract SuperchainConfig","name":"_superchainConfig","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"l2TokenBridge","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"messenger","outputs":[{"internalType":"contract CrossDomainMessenger","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"otherBridge","outputs":[{"internalType":"contract StandardBridge","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"superchainConfig","outputs":[{"internalType":"contract SuperchainConfig","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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