Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity =0.8.24;

// IERC20
import {IERC20} from "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import {ReentrancyGuard} from "openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol";
import {Meme} from "./Meme.sol";
import {IFairLaunch, FairLaunchLimitBlockStruct} from "./IFairLaunch.sol";
import {NoDelegateCall} from "./NoDelegateCall.sol";
import {IERC721} from "openzeppelin-contracts/contracts/token/ERC721/IERC721.sol";

interface IUniLocker {
    function lock(
        address lpToken,
        uint256 amountOrId,
        uint256 unlockBlock
    ) external returns (uint256 id);
}

interface IUniswapV3Factory {
    function getPool(
        address tokenA,
        address tokenB,
        uint24 fee
    ) external view returns (address pool);

    function createPool(
        address tokenA,
        address tokenB,
        uint24 fee
    ) external returns (address pool);
}

interface IFactory {
    function owner() external view returns (address);
}

interface INonfungiblePositionManager {
    function WETH9() external pure returns (address);

    struct MintParams {
        address token0;
        address token1;
        uint24 fee;
        int24 tickLower;
        int24 tickUpper;
        uint256 amount0Desired;
        uint256 amount1Desired;
        uint256 amount0Min;
        uint256 amount1Min;
        address recipient;
        uint256 deadline;
    }

    function mint(
        MintParams calldata params
    )
        external
        payable
        returns (
            uint256 tokenId,
            uint128 liquidity,
            uint256 amount0,
            uint256 amount1
        );

    function createAndInitializePoolIfNecessary(
        address token0,
        address token1,
        uint24 fee,
        uint160 sqrtPriceX96
    ) external payable returns (address pool);

    function refundETH() external payable;
}

contract FairLaunchLimitBlockTokenV3 is
    IFairLaunch,
    Meme,
    ReentrancyGuard,
    NoDelegateCall
{
    using SafeERC20 for IERC20;
    using Math for uint256;

    // refund command
    // before start, you can always refund
    // send 0.0002 ether to the contract address to refund all ethers
    uint256 public constant REFUND_COMMAND = 0.0002 ether;

    // claim command
    // after start, you can claim extra eth
    // send 0.0002 ether to the contract address to claim extra eth
    uint256 public constant CLAIM_COMMAND = 0.0002 ether;

    // start trading command
    // if the untilBlockNumber reached, you can start trading with this command
    // send 0.0005 ether to the contract address to start trading
    uint256 public constant START_COMMAND = 0.0005 ether;

    // mint command
    // if the untilBlockNumber reached, you can mint token with this command
    // send 0.0001 ether to the contract address to get tokens
    uint256 public constant MINT_COMMAND = 0.0001 ether;

    // minimal fund
    uint256 public constant MINIMAL_FUND = 0.0001 ether;

    // is trading started
    bool public started;

    address public immutable uniswapPositionManager;
    address public immutable uniswapFactory;

    // fund balance
    mapping(address => uint256) public fundBalanceOf;

    // is address minted
    mapping(address => bool) public minted;

    // total dispatch amount
    uint256 public immutable totalDispatch;

    // until block number
    uint256 public immutable untilBlockNumber;

    // total ethers funded
    uint256 public totalEthers;

    // soft top cap
    uint256 public immutable softTopCap;

    // refund fee rate
    uint256 public refundFeeRate;

    // refund fee to
    address public immutable refundFeeTo;

    // is address claimed extra eth
    mapping(address => bool) public claimed;

    // recipient must be a contract address of IUniLocker
    address public immutable locker;

    // feePool
    uint24 public immutable poolFee;

    // project owner, whill receive the locked lp
    address public immutable projectOwner;

    // fair launch factory
    address public immutable factory;

    // weth
    address public immutable weth;

    // launchfeerate 0.3%
    uint256 public constant launchFeeRate = 30;

    //
    uint256 public constant maxFundLimit = 10 ether;

    int24 public immutable tickLower;

    int24 public immutable tickUpper;

    constructor(
        address _locker,
        uint24 _poolFee,
        address _projectOwner,
        FairLaunchLimitBlockStruct memory params
    ) Meme(params.name, params.symbol, params.meta) {
        started = false;

        totalDispatch = params.totalSupply;
        _mint(address(this), totalDispatch);

        // set uniswap router
        uniswapPositionManager = params.uniswapRouter;
        uniswapFactory = params.uniswapFactory;

        meta = params.meta;

        untilBlockNumber = params.afterBlock + block.number;
        softTopCap = params.softTopCap;

        refundFeeRate = params.refundFeeRate;
        refundFeeTo = params.refundFeeTo;

        locker = _locker;
        projectOwner = _projectOwner;

        poolFee = _poolFee;
        factory = msg.sender;

        tickLower = block.chainid == 56 || block.chainid == 97
            ? -887250
            : -887220;
        tickUpper = block.chainid == 56 || block.chainid == 97
            ? int24(887250)
            : int24(887220);

        weth = INonfungiblePositionManager(uniswapPositionManager).WETH9();

        (address token0, address token1) = address(this) < weth
            ? (address(this), weth)
            : (weth, address(this));

        (uint256 amount0, uint256 amount1) = address(this) < weth
            ? (totalDispatch / 2, softTopCap)
            : (softTopCap, totalDispatch / 2);

        uint160 sqrtPriceX96 = getSqrtPriceX96(amount0, amount1);
        INonfungiblePositionManager(uniswapPositionManager)
            .createAndInitializePoolIfNecessary(
                token0,
                token1,
                poolFee,
                sqrtPriceX96
            );
    }

    // clear refund fee
    function clearRefundFee() public {
        IFactory _factory = IFactory(factory);
        require(msg.sender == _factory.owner(), "FairMint: only owner");
        refundFeeRate = 0;
    }

    receive() external payable noDelegateCall {
        if (msg.sender == uniswapPositionManager) {
            return;
        }
        require(
            tx.origin == msg.sender,
            "FairMint: can not send command from contract."
        );

        if (started) {
            // after started
            if (msg.value == MINT_COMMAND) {
                // mint token
                _mintToken();
            } else if (msg.value == CLAIM_COMMAND) {
                _claimExtraETH();
            } else {
                revert("FairMint: invalid command - mint or claim only");
            }
        } else {
            // before started
            if (canStart()) {
                if (msg.value == REFUND_COMMAND) {
                    // before start, you can always refund
                    _refund();
                } else if (msg.value == START_COMMAND) {
                    // start trading, add liquidity to uniswap
                    _start();
                } else {
                    revert("FairMint: invalid command - start or refund only");
                }
            } else {
                if (msg.value == REFUND_COMMAND) {
                    // before start, you can always refund
                    _refund();
                } else {
                    // before start, any other value will be considered as fund
                    _fund();
                }
            }
        }
    }

    function canStart() public view returns (bool) {
        return block.number >= untilBlockNumber;
    }

    // get extra eth
    function getExtraETH(address _addr) public view returns (uint256) {
        uint256 left = totalEthers - _getFee(totalEthers);
        if (left > softTopCap) {
            // 0.001 * （left - softTopCap） / left
            uint256 claimAmount = fundBalanceOf[_addr] * (left - softTopCap) /
                totalEthers;
            return claimAmount;
        }
        return 0;
    }

    function _getFee(uint256 amount) private pure returns (uint256) {
        return (amount * launchFeeRate) / 10000;
    }

    // claim extra eth
    function _claimExtraETH() private nonReentrant {
        // must after start
        require(started, "FairMint: withdraw extra eth must after start");
        require(softTopCap > 0, "FairMint: soft top cap must be set");
        require(totalEthers > softTopCap, "FairMint: no extra eth");

        uint256 fundAmount = fundBalanceOf[msg.sender];
        require(fundAmount > 0, "FairMint: no fund");

        require(!claimed[msg.sender], "FairMint: already claimed");
        claimed[msg.sender] = true;

        uint256 claimAmount = getExtraETH(msg.sender);
        // send to msg sender
        (bool success, ) = msg.sender.call{value: claimAmount + CLAIM_COMMAND}(
            ""
        );
        require(success, "FairMint: withdraw failed");
    }

    // estimate how many tokens you might get
    function mightGet(address account) public view returns (uint256) {
        if (totalEthers == 0) {
            return 0;
        }
        uint256 _mintAmount = (totalDispatch * fundBalanceOf[account]) /
            2 /
            totalEthers;
        return _mintAmount;
    }

    function _fund() private nonReentrant {
        // require msg.value > 0.0001 ether
        require(!started, "FairMint: already started");
        require(msg.value >= MINIMAL_FUND, "FairMint: value too low");
        // each account can only fund 10 ethers
        require(
            fundBalanceOf[msg.sender] + msg.value <= maxFundLimit,
            "FairMint: fund limit reached"
        );
        fundBalanceOf[msg.sender] += msg.value;
        totalEthers += msg.value;
        emit FundEvent(msg.sender, msg.value, 0);
    }

    function _refund() private nonReentrant {
        require(!started, "FairMint: already started");

        address account = msg.sender;
        uint256 amount = fundBalanceOf[account];
        require(amount > 0, "FairMint: no fund");
        fundBalanceOf[account] = 0;
        totalEthers -= amount;

        uint256 fee = (amount * refundFeeRate) / 10000;
        assert(fee < amount);

        if (fee > 0 && refundFeeTo != address(0)) {
            (bool success, ) = refundFeeTo.call{value: fee}("");
            require(success, "FairMint: refund fee failed");
        }

        (bool success1, ) = account.call{value: amount - fee + REFUND_COMMAND}(
            ""
        );
        require(success1, "FairMint: refund failed");
        emit RefundEvent(account, 0, amount);
    }

    function _mintToken() private nonReentrant {
        require(started, "FairMint: not started");
        require(msg.sender == tx.origin, "FairMint: can not mint to contract.");
        require(!minted[msg.sender], "FairMint: already minted");

        minted[msg.sender] = true;

        uint256 _mintAmount = mightGet(msg.sender);

        require(_mintAmount > 0, "FairMint: mint amount is zero");
        assert(_mintAmount <= totalDispatch / 2);
        _transfer(address(this), msg.sender, _mintAmount);

        (bool success, ) = msg.sender.call{value: MINT_COMMAND}("");
        require(success, "FairMint: mint failed");
    }

    function _start() private nonReentrant {
        require(!started, "FairMint: already started");
        require(balanceOf(address(this)) > 0, "FairMint: no balance");
        INonfungiblePositionManager _positionManager = INonfungiblePositionManager(
                uniswapPositionManager
            );

        uint256 fee = _getFee(totalEthers);
        uint256 left = totalEthers - fee;

        uint256 totalAdd = softTopCap > 0
            ? softTopCap < left ? softTopCap : left
            : left;

        _approve(
            address(this),
            uniswapPositionManager,
            type(uint256).max,
            false
        );

        (address token0, address token1) = address(this) < weth
            ? (address(this), weth)
            : (weth, address(this));

        (uint256 amount0, uint256 amount1) = address(this) < weth
            ? (totalDispatch / 2, totalAdd)
            : (totalAdd, totalDispatch / 2);

        INonfungiblePositionManager.MintParams memory params = INonfungiblePositionManager
            .MintParams({
                token0: token0,
                token1: token1,
                fee: poolFee,
                tickLower: tickLower, 
                tickUpper: tickUpper, 
                amount0Desired: amount0,
                amount1Desired: amount1,
                amount0Min: weth == token0 ? (amount0 * 9800) / 10000 : 0,
                amount1Min: weth == token1 ? (amount1 * 9800) / 10000 : 0,
                recipient: locker == address(0) ? address(0) : address(this),
                deadline: block.timestamp + 1 hours
            });

        (
            uint256 tokenId,
            uint128 liquidity,
            uint256 _amount0,
            uint256 _amount1
        ) = _positionManager.mint{value: totalAdd}(params);

        _positionManager.refundETH();
        started = true;

        // drop all of the rest tokens to zero
        if (
            IERC20(address(this)).balanceOf(address(this)) > totalDispatch / 2
        ) {
            _burn(address(this), balanceOf(address(this)) - totalDispatch / 2);
        }

        emit LaunchEvent(address(this), _amount0, _amount1, liquidity);
        // lock lp into contract forever
        if (locker != address(0)) {
            IERC721(uniswapPositionManager).approve(locker, tokenId);
            IUniLocker _locker = IUniLocker(locker);
            uint256 _lockId = _locker.lock(
                uniswapPositionManager,
                tokenId,
                type(uint256).max
            );
            IERC721(locker).transferFrom(address(this), projectOwner, _lockId);
        }

        // split fee : refundAddress 0.1% , projectOwner 0.2%
        if (fee > 0) {
            (bool success1, ) = refundFeeTo.call{value: totalEthers / 1000}("");
            require(success1, "FairMint: refund fee failed");

            (bool success2, ) = projectOwner.call{
                value: (totalEthers * 2) / 1000
            }("");
            require(success2, "FairMint: project fee failed");
        }

        // mint token
        (bool success, ) = msg.sender.call{value: START_COMMAND}("");
        require(success, "FairMint: mint failed");
    }

    function _update(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(value > 0, "ERC20: transfer from the zero address");
        super._update(from, to, value);
    }

    function getSqrtPriceX96(
        uint256 amount0,
        uint256 amount1
    ) internal pure returns (uint160) {
        require(amount0 > 0 && amount1 > 0, "Amounts must be greater than 0");

        uint256 price = (amount1 * 1e18) / amount0;
        uint256 sqrtPrice = price.sqrt();
        uint256 sqrtPriceX96Full = (sqrtPrice << 96) / 1e9;
        return uint160(sqrtPriceX96Full);
    }
}

library Math {
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 result = a;
        uint256 k = a / 2 + 1;
        while (k < result) {
            result = k;
            k = (a / k + k) / 2;
        }
        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {IMeme} from "./IMeme.sol";
import {ERC20} from "openzeppelin-contracts/contracts/token/ERC20/ERC20.sol";

contract Meme is IMeme, ERC20 {
    string public override meta;

    constructor(
        string memory name,
        string memory symbol,
        string memory _meta) ERC20(name, symbol) {
        meta = _meta;
    }

    function _update(address from, address to, uint256 value) internal virtual override {
        super._update(from, to, value);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

interface IFairLaunch {
    event Deployed(address indexed addr, uint256 _type);
    event FundEvent(
        address indexed to,
        uint256 ethAmount,
        uint256 amountOfTokens
    );

    event LaunchEvent(
        address indexed to,
        uint256 amount,
        uint256 ethAmount,
        uint256 liquidity
    );
    event RefundEvent(address indexed from, uint256 amount, uint256 eth);
}

struct FairLaunchLimitAmountStruct {
    uint256 price;
    uint256 amountPerUnits;
    uint256 totalSupply;
    address launcher;
    address uniswapRouter;
    address uniswapFactory;
    string name;
    string symbol;
    string meta;
    uint256 eachAddressLimitEthers;
    uint256 refundFeeRate;
    address refundFeeTo;
}

struct FairLaunchLimitBlockStruct {
    uint256 totalSupply;
    address uniswapRouter;
    address uniswapFactory;
    string name;
    string symbol;
    string meta;
    uint256 afterBlock;
    uint256 softTopCap;
    uint256 refundFeeRate;
    address refundFeeTo;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.19;

/// @title Prevents delegatecall to a contract
/// @notice Base contract that provides a modifier for preventing delegatecall to methods in a child contract
abstract contract NoDelegateCall {
    /// @dev The original address of this contract
    address private immutable original;

    constructor() {
        // Immutables are computed in the init code of the contract, and then inlined into the deployed bytecode.
        // In other words, this variable won't change when it's checked at runtime.
        original = address(this);
    }

    /// @dev Private method is used instead of inlining into modifier because modifiers are copied into each method,
    ///     and the use of immutable means the address bytes are copied in every place the modifier is used.
    function checkNotDelegateCall() private view {
        require(address(this) == original);
    }

    /// @notice Prevents delegatecall into the modified method
    modifier noDelegateCall() {
        checkNotDelegateCall();
        _;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19;

import {IERC20Metadata} from "openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol";

interface IMeme is IERC20Metadata {
    function meta() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/openzeppelin-contracts/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_locker","type":"address"},{"internalType":"uint24","name":"_poolFee","type":"uint24"},{"internalType":"address","name":"_projectOwner","type":"address"},{"components":[{"internalType":"uint256","name":"totalSupply","type":"uint256"},{"internalType":"address","name":"uniswapRouter","type":"address"},{"internalType":"address","name":"uniswapFactory","type":"address"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"string","name":"meta","type":"string"},{"internalType":"uint256","name":"afterBlock","type":"uint256"},{"internalType":"uint256","name":"softTopCap","type":"uint256"},{"internalType":"uint256","name":"refundFeeRate","type":"uint256"},{"internalType":"address","name":"refundFeeTo","type":"address"}],"internalType":"struct FairLaunchLimitBlockStruct","name":"params","type":"tuple"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"addr","type":"address"},{"indexed":false,"internalType":"uint256","name":"_type","type":"uint256"}],"name":"Deployed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"ethAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountOfTokens","type":"uint256"}],"name":"FundEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"ethAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"liquidity","type":"uint256"}],"name":"LaunchEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"eth","type":"uint256"}],"name":"RefundEvent","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"CLAIM_COMMAND","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINIMAL_FUND","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINT_COMMAND","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"REFUND_COMMAND","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"START_COMMAND","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"canStart","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"claimed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"clearRefundFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"factory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"fundBalanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_addr","type":"address"}],"name":"getExtraETH","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"launchFeeRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"locker","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxFundLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"meta","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"mightGet","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"minted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolFee","outputs":[{"internalType":"uint24","name":"","type":"uint24"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"projectOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"refundFeeRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"refundFeeTo","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"softTopCap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"started","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tickLower","outputs":[{"internalType":"int24","name":"","type":"int24"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tickUpper","outputs":[{"internalType":"int24","name":"","type":"int24"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalDispatch","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalEthers","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswapFactory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"uniswapPositionManager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"untilBlockNumber","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"weth","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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