Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.18;

import { BaseStrategy } from "tokenized-strategy/BaseStrategy.sol";
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { IERC4626 } from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import { CurveRouterSwapper } from "src/swappers/CurveRouterSwapper.sol";
import { YearnGaugeStrategyBase } from "./YearnGaugeStrategyBase.sol";
import { IYearnStakingDelegate } from "src/interfaces/IYearnStakingDelegate.sol";
import { Errors } from "src/libraries/Errors.sol";

/**
 * @title YearnGaugeStrategy
 * @notice Strategy for interacting with Yearn Gauge
 */
contract YearnGaugeStrategy is BaseStrategy, CurveRouterSwapper, YearnGaugeStrategyBase {
    // Libraries
    using SafeERC20 for IERC20;

    /// @notice Parameters for Curve swap used during harvest
    CurveSwapParams internal _harvestSwapParams;

    /// @notice Address of the contract that will be redeeming dYFI for YFI for this strategy
    address private _dYfiRedeemer;

    //// events ////
    event DYfiRedeemerSet(address oldDYfiRedeemer, address newDYfiRedeemer);

    /**
     * @notice Initializes the YearnGaugeStrategy
     * @param asset_ The address of the asset (gauge token)
     * @param yearnStakingDelegate_ The address of the YearnStakingDelegate
     * @param curveRouter_ The address of the Curve router
     */
    constructor(
        address asset_,
        address yearnStakingDelegate_,
        address curveRouter_
    )
        payable
        BaseStrategy(asset_, "Wrapped YearnV3 Strategy")
        CurveRouterSwapper(curveRouter_)
        YearnGaugeStrategyBase(asset_, yearnStakingDelegate_)
    {
        _approveTokenForSwap(_YFI);
    }

    /**
     * @notice Sets the parameters for the Curve swap used in the harvest function
     * @param curveSwapParams The parameters for the Curve swap
     */
    function setHarvestSwapParams(CurveSwapParams calldata curveSwapParams) external onlyManagement {
        // Checks (includes external view calls)
        _validateSwapParams(curveSwapParams, _YFI, _VAULT_ASSET);

        // Effects
        _harvestSwapParams = curveSwapParams;
    }

    /**
     * @notice Sets the address of the contract that will be redeeming dYFI
     * @param newDYfiRedeemer The address of the new dYFI redeemer contract
     */
    function setDYfiRedeemer(address newDYfiRedeemer) external onlyManagement {
        // Checks
        if (newDYfiRedeemer == address(0)) {
            revert Errors.ZeroAddress();
        }
        address currentDYfiRedeemer = _dYfiRedeemer;
        if (newDYfiRedeemer == currentDYfiRedeemer) {
            revert Errors.SameAddress();
        }
        // Effects
        _dYfiRedeemer = newDYfiRedeemer;
        // Interactions
        emit DYfiRedeemerSet(currentDYfiRedeemer, newDYfiRedeemer);
        if (currentDYfiRedeemer != address(0)) {
            IERC20(_DYFI).forceApprove(currentDYfiRedeemer, 0);
        }
        IERC20(_DYFI).forceApprove(newDYfiRedeemer, type(uint256).max);
    }

    /**
     * @notice Get the address of the contract that will be redeeming dYFI from this strategy
     * @return The address of the dYFI redeemer contract
     */
    function dYfiRedeemer() external view returns (address) {
        return _dYfiRedeemer;
    }

    /**
     * @notice Calculates the available deposit limit for the strategy
     * @return The strategy's available deposit limit
     */
    function availableDepositLimit(address) public view override returns (uint256) {
        return IYearnStakingDelegate(_YEARN_STAKING_DELEGATE).availableDepositLimit(address(asset));
    }

    /**
     * @dev Deploys funds into the YearnStakingDelegate by depositing the asset.
     * @param _amount The amount of the asset to deposit.
     */
    function _deployFunds(uint256 _amount) internal override {
        _depositToYSD(address(asset), _amount);
    }

    /**
     * @dev Withdraws funds from the YearnStakingDelegate by withdrawing the asset.
     * @param _amount The amount of the asset to withdraw.
     */
    function _freeFunds(uint256 _amount) internal override {
        _withdrawFromYSD(address(asset), _amount);
    }

    /**
     * @dev Performs an emergency withdrawal from the YearnStakingDelegate, withdrawing the asset to the strategy.
     * @param amount The amount to withdraw in case of an emergency.
     */
    function _emergencyWithdraw(uint256 amount) internal override {
        uint256 deployedAmount = depositedInYSD(address(asset));
        uint256 withdrawAmount = amount > deployedAmount ? deployedAmount : amount;
        _withdrawFromYSD(address(asset), withdrawAmount);
    }

    /**
     * @notice Harvests dYfi rewards, swaps YFI for the vault asset, and re-deposits or adds to idle balance
     * @return _totalAssets The total assets after harvest and redeposit/idle balance update
     */
    function _harvestAndReport() internal override returns (uint256 _totalAssets) {
        // Check for any dYfi that has been redeemed for Yfi
        uint256 yfiBalance = IERC20(_YFI).balanceOf(address(this));
        // If dfi has been redeemed for Yfi, swap it for vault asset and deploy it to the strategy
        if (yfiBalance > 0) {
            // This is a dangerous swap call that will get sandwiched if sent to a public network
            // Must be sent to a private network or use a minAmount derived from a price oracle
            uint256 receivedBaseTokens = _swap(_harvestSwapParams, yfiBalance, 0, address(this));
            uint256 receivedVaultTokens = IERC4626(_VAULT).deposit(receivedBaseTokens, address(this));
            uint256 receivedGaugeTokens = IERC4626(address(asset)).deposit(receivedVaultTokens, address(this));

            // If the strategy is not shutdown, deploy the funds
            // Else add the received tokens to the idle balance
            if (!TokenizedStrategy.isShutdown()) {
                _deployFunds(receivedGaugeTokens);
            }
        }
        // Return the total idle assets and the deployed assets
        return asset.balanceOf(address(this)) + depositedInYSD(address(asset));
    }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";

// TokenizedStrategy interface used for internal view delegateCalls.
import {ITokenizedStrategy} from "./interfaces/ITokenizedStrategy.sol";

/**
 * @title YearnV3 Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to
 *  seamlessly integrate with the `TokenizedStrategy` implementation contract
 *  allowing anyone to easily build a fully permissionless ERC-4626 compliant
 *  Vault by inheriting this contract and overriding three simple functions.

 *  It utilizes an immutable proxy pattern that allows the BaseStrategy
 *  to remain simple and small. All standard logic is held within the
 *  `TokenizedStrategy` and is reused over any n strategies all using the
 *  `fallback` function to delegatecall the implementation so that strategists
 *  can only be concerned with writing their strategy specific code.
 *
 *  This contract should be inherited and the three main abstract methods
 *  `_deployFunds`, `_freeFunds` and `_harvestAndReport` implemented to adapt
 *  the Strategy to the particular needs it has to generate yield. There are
 *  other optional methods that can be implemented to further customize
 *  the strategy if desired.
 *
 *  All default storage for the strategy is controlled and updated by the
 *  `TokenizedStrategy`. The implementation holds a storage struct that
 *  contains all needed global variables in a manual storage slot. This
 *  means strategists can feel free to implement their own custom storage
 *  variables as they need with no concern of collisions. All global variables
 *  can be viewed within the Strategy by a simple call using the
 *  `TokenizedStrategy` variable. IE: TokenizedStrategy.globalVariable();.
 */
abstract contract BaseStrategy {
    /*//////////////////////////////////////////////////////////////
                            MODIFIERS
    //////////////////////////////////////////////////////////////*/
    /**
     * @dev Used on TokenizedStrategy callback functions to make sure it is post
     * a delegateCall from this address to the TokenizedStrategy.
     */
    modifier onlySelf() {
        _onlySelf();
        _;
    }

    /**
     * @dev Use to assure that the call is coming from the strategies management.
     */
    modifier onlyManagement() {
        TokenizedStrategy.requireManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the keeper.
     */
    modifier onlyKeepers() {
        TokenizedStrategy.requireKeeperOrManagement(msg.sender);
        _;
    }

    /**
     * @dev Use to assure that the call is coming from either the strategies
     * management or the emergency admin.
     */
    modifier onlyEmergencyAuthorized() {
        TokenizedStrategy.requireEmergencyAuthorized(msg.sender);
        _;
    }

    /**
     * @dev Require that the msg.sender is this address.
     */
    function _onlySelf() internal view {
        require(msg.sender == address(this), "!self");
    }

    /*//////////////////////////////////////////////////////////////
                            CONSTANTS
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev This is the address of the TokenizedStrategy implementation
     * contract that will be used by all strategies to handle the
     * accounting, logic, storage etc.
     *
     * Any external calls to the that don't hit one of the functions
     * defined in this base or the strategy will end up being forwarded
     * through the fallback function, which will delegateCall this address.
     *
     * This address should be the same for every strategy, never be adjusted
     * and always be checked before any integration with the Strategy.
     */
    address public constant tokenizedStrategyAddress =
        0xBB51273D6c746910C7C06fe718f30c936170feD0;

    /*//////////////////////////////////////////////////////////////
                            IMMUTABLES
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Underlying asset the Strategy is earning yield on.
     * Stored here for cheap retrievals within the strategy.
     */
    ERC20 internal immutable asset;

    /**
     * @dev This variable is set to address(this) during initialization of each strategy.
     *
     * This can be used to retrieve storage data within the strategy
     * contract as if it were a linked library.
     *
     *       i.e. uint256 totalAssets = TokenizedStrategy.totalAssets()
     *
     * Using address(this) will mean any calls using this variable will lead
     * to a call to itself. Which will hit the fallback function and
     * delegateCall that to the actual TokenizedStrategy.
     */
    ITokenizedStrategy internal immutable TokenizedStrategy;

    /**
     * @notice Used to initialize the strategy on deployment.
     *
     * This will set the `TokenizedStrategy` variable for easy
     * internal view calls to the implementation. As well as
     * initializing the default storage variables based on the
     * parameters and using the deployer for the permissioned roles.
     *
     * @param _asset Address of the underlying asset.
     * @param _name Name the strategy will use.
     */
    constructor(address _asset, string memory _name) {
        asset = ERC20(_asset);

        // Set instance of the implementation for internal use.
        TokenizedStrategy = ITokenizedStrategy(address(this));

        // Initialize the strategy's storage variables.
        _delegateCall(
            abi.encodeCall(
                ITokenizedStrategy.initialize,
                (_asset, _name, msg.sender, msg.sender, msg.sender)
            )
        );

        // Store the tokenizedStrategyAddress at the standard implementation
        // address storage slot so etherscan picks up the interface. This gets
        // stored on initialization and never updated.
        assembly {
            sstore(
                // keccak256('eip1967.proxy.implementation' - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                tokenizedStrategyAddress
            )
        }
    }

    /*//////////////////////////////////////////////////////////////
                NEEDED TO BE OVERRIDDEN BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Can deploy up to '_amount' of 'asset' in the yield source.
     *
     * This function is called at the end of a {deposit} or {mint}
     * call. Meaning that unless a whitelist is implemented it will
     * be entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can attempt
     * to deposit in the yield source.
     */
    function _deployFunds(uint256 _amount) internal virtual;

    /**
     * @dev Should attempt to free the '_amount' of 'asset'.
     *
     * NOTE: The amount of 'asset' that is already loose has already
     * been accounted for.
     *
     * This function is called during {withdraw} and {redeem} calls.
     * Meaning that unless a whitelist is implemented it will be
     * entirely permissionless and thus can be sandwiched or otherwise
     * manipulated.
     *
     * Should not rely on asset.balanceOf(address(this)) calls other than
     * for diff accounting purposes.
     *
     * Any difference between `_amount` and what is actually freed will be
     * counted as a loss and passed on to the withdrawer. This means
     * care should be taken in times of illiquidity. It may be better to revert
     * if withdraws are simply illiquid so not to realize incorrect losses.
     *
     * @param _amount, The amount of 'asset' to be freed.
     */
    function _freeFunds(uint256 _amount) internal virtual;

    /**
     * @dev Internal function to harvest all rewards, redeploy any idle
     * funds and return an accurate accounting of all funds currently
     * held by the Strategy.
     *
     * This should do any needed harvesting, rewards selling, accrual,
     * redepositing etc. to get the most accurate view of current assets.
     *
     * NOTE: All applicable assets including loose assets should be
     * accounted for in this function.
     *
     * Care should be taken when relying on oracles or swap values rather
     * than actual amounts as all Strategy profit/loss accounting will
     * be done based on this returned value.
     *
     * This can still be called post a shutdown, a strategist can check
     * `TokenizedStrategy.isShutdown()` to decide if funds should be
     * redeployed or simply realize any profits/losses.
     *
     * @return _totalAssets A trusted and accurate account for the total
     * amount of 'asset' the strategy currently holds including idle funds.
     */
    function _harvestAndReport()
        internal
        virtual
        returns (uint256 _totalAssets);

    /*//////////////////////////////////////////////////////////////
                    OPTIONAL TO OVERRIDE BY STRATEGIST
    //////////////////////////////////////////////////////////////*/

    /**
     * @dev Optional function for strategist to override that can
     *  be called in between reports.
     *
     * If '_tend' is used tendTrigger() will also need to be overridden.
     *
     * This call can only be called by a permissioned role so may be
     * through protected relays.
     *
     * This can be used to harvest and compound rewards, deposit idle funds,
     * perform needed position maintenance or anything else that doesn't need
     * a full report for.
     *
     *   EX: A strategy that can not deposit funds without getting
     *       sandwiched can use the tend when a certain threshold
     *       of idle to totalAssets has been reached.
     *
     * This will have no effect on PPS of the strategy till report() is called.
     *
     * @param _totalIdle The current amount of idle funds that are available to deploy.
     */
    function _tend(uint256 _totalIdle) internal virtual {}

    /**
     * @dev Optional trigger to override if tend() will be used by the strategy.
     * This must be implemented if the strategy hopes to invoke _tend().
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     */
    function _tendTrigger() internal view virtual returns (bool) {
        return false;
    }

    /**
     * @notice Returns if tend() should be called by a keeper.
     *
     * @return . Should return true if tend() should be called by keeper or false if not.
     * @return . Calldata for the tend call.
     */
    function tendTrigger() external view virtual returns (bool, bytes memory) {
        return (
            // Return the status of the tend trigger.
            _tendTrigger(),
            // And the needed calldata either way.
            abi.encodeWithSelector(ITokenizedStrategy.tend.selector)
        );
    }

    /**
     * @notice Gets the max amount of `asset` that an address can deposit.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any deposit or mints to enforce
     * any limits desired by the strategist. This can be used for either a
     * traditional deposit limit or for implementing a whitelist etc.
     *
     *   EX:
     *      if(isAllowed[_owner]) return super.availableDepositLimit(_owner);
     *
     * This does not need to take into account any conversion rates
     * from shares to assets. But should know that any non max uint256
     * amounts may be converted to shares. So it is recommended to keep
     * custom amounts low enough as not to cause overflow when multiplied
     * by `totalSupply`.
     *
     * @param . The address that is depositing into the strategy.
     * @return . The available amount the `_owner` can deposit in terms of `asset`
     */
    function availableDepositLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @notice Gets the max amount of `asset` that can be withdrawn.
     * @dev Defaults to an unlimited amount for any address. But can
     * be overridden by strategists.
     *
     * This function will be called before any withdraw or redeem to enforce
     * any limits desired by the strategist. This can be used for illiquid
     * or sandwichable strategies. It should never be lower than `totalIdle`.
     *
     *   EX:
     *       return TokenIzedStrategy.totalIdle();
     *
     * This does not need to take into account the `_owner`'s share balance
     * or conversion rates from shares to assets.
     *
     * @param . The address that is withdrawing from the strategy.
     * @return . The available amount that can be withdrawn in terms of `asset`
     */
    function availableWithdrawLimit(
        address /*_owner*/
    ) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /**
     * @dev Optional function for a strategist to override that will
     * allow management to manually withdraw deployed funds from the
     * yield source if a strategy is shutdown.
     *
     * This should attempt to free `_amount`, noting that `_amount` may
     * be more than is currently deployed.
     *
     * NOTE: This will not realize any profits or losses. A separate
     * {report} will be needed in order to record any profit/loss. If
     * a report may need to be called after a shutdown it is important
     * to check if the strategy is shutdown during {_harvestAndReport}
     * so that it does not simply re-deploy all funds that had been freed.
     *
     * EX:
     *   if(freeAsset > 0 && !TokenizedStrategy.isShutdown()) {
     *       depositFunds...
     *    }
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function _emergencyWithdraw(uint256 _amount) internal virtual {}

    /*//////////////////////////////////////////////////////////////
                        TokenizedStrategy HOOKS
    //////////////////////////////////////////////////////////////*/

    /**
     * @notice Can deploy up to '_amount' of 'asset' in yield source.
     * @dev Callback for the TokenizedStrategy to call during a {deposit}
     * or {mint} to tell the strategy it can deploy funds.
     *
     * Since this can only be called after a {deposit} or {mint}
     * delegateCall to the TokenizedStrategy msg.sender == address(this).
     *
     * Unless a whitelist is implemented this will be entirely permissionless
     * and thus can be sandwiched or otherwise manipulated.
     *
     * @param _amount The amount of 'asset' that the strategy can
     * attempt to deposit in the yield source.
     */
    function deployFunds(uint256 _amount) external virtual onlySelf {
        _deployFunds(_amount);
    }

    /**
     * @notice Should attempt to free the '_amount' of 'asset'.
     * @dev Callback for the TokenizedStrategy to call during a withdraw
     * or redeem to free the needed funds to service the withdraw.
     *
     * This can only be called after a 'withdraw' or 'redeem' delegateCall
     * to the TokenizedStrategy so msg.sender == address(this).
     *
     * @param _amount The amount of 'asset' that the strategy should attempt to free up.
     */
    function freeFunds(uint256 _amount) external virtual onlySelf {
        _freeFunds(_amount);
    }

    /**
     * @notice Returns the accurate amount of all funds currently
     * held by the Strategy.
     * @dev Callback for the TokenizedStrategy to call during a report to
     * get an accurate accounting of assets the strategy controls.
     *
     * This can only be called after a report() delegateCall to the
     * TokenizedStrategy so msg.sender == address(this).
     *
     * @return . A trusted and accurate account for the total amount
     * of 'asset' the strategy currently holds including idle funds.
     */
    function harvestAndReport() external virtual onlySelf returns (uint256) {
        return _harvestAndReport();
    }

    /**
     * @notice Will call the internal '_tend' when a keeper tends the strategy.
     * @dev Callback for the TokenizedStrategy to initiate a _tend call in the strategy.
     *
     * This can only be called after a tend() delegateCall to the TokenizedStrategy
     * so msg.sender == address(this).
     *
     * We name the function `tendThis` so that `tend` calls are forwarded to
     * the TokenizedStrategy.

     * @param _totalIdle The amount of current idle funds that can be
     * deployed during the tend
     */
    function tendThis(uint256 _totalIdle) external virtual onlySelf {
        _tend(_totalIdle);
    }

    /**
     * @notice Will call the internal '_emergencyWithdraw' function.
     * @dev Callback for the TokenizedStrategy during an emergency withdraw.
     *
     * This can only be called after a emergencyWithdraw() delegateCall to
     * the TokenizedStrategy so msg.sender == address(this).
     *
     * We name the function `shutdownWithdraw` so that `emergencyWithdraw`
     * calls are forwarded to the TokenizedStrategy.
     *
     * @param _amount The amount of asset to attempt to free.
     */
    function shutdownWithdraw(uint256 _amount) external virtual onlySelf {
        _emergencyWithdraw(_amount);
    }

    /**
     * @dev Function used to delegate call the TokenizedStrategy with
     * certain `_calldata` and return any return values.
     *
     * This is used to setup the initial storage of the strategy, and
     * can be used by strategist to forward any other call to the
     * TokenizedStrategy implementation.
     *
     * @param _calldata The abi encoded calldata to use in delegatecall.
     * @return . The return value if the call was successful in bytes.
     */
    function _delegateCall(
        bytes memory _calldata
    ) internal returns (bytes memory) {
        // Delegate call the tokenized strategy with provided calldata.
        (bool success, bytes memory result) = tokenizedStrategyAddress
            .delegatecall(_calldata);

        // If the call reverted. Return the error.
        if (!success) {
            assembly {
                let ptr := mload(0x40)
                let size := returndatasize()
                returndatacopy(ptr, 0, size)
                revert(ptr, size)
            }
        }

        // Return the result.
        return result;
    }

    /**
     * @dev Execute a function on the TokenizedStrategy and return any value.
     *
     * This fallback function will be executed when any of the standard functions
     * defined in the TokenizedStrategy are called since they wont be defined in
     * this contract.
     *
     * It will delegatecall the TokenizedStrategy implementation with the exact
     * calldata and return any relevant values.
     *
     */
    fallback() external {
        // load our target address
        address _tokenizedStrategyAddress = tokenizedStrategyAddress;
        // Execute external function using delegatecall and return any value.
        assembly {
            // Copy function selector and any arguments.
            calldatacopy(0, 0, calldatasize())
            // Execute function delegatecall.
            let result := delegatecall(
                gas(),
                _tokenizedStrategyAddress,
                0,
                calldatasize(),
                0,
                0
            )
            // Get any return value
            returndatacopy(0, 0, returndatasize())
            // Return any return value or error back to the caller
            switch result
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";
import "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * _Available since v4.7._
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.18;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Errors } from "src/libraries/Errors.sol";
import { ICurveRouter } from "src/interfaces/deps/curve/ICurveRouter.sol";
import { IERC20Metadata } from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @title Curve Router Library
 * @notice Contains helper methods for interacting with Curve Router.
 * @dev Curve router is deployed on these networks at 0xF0d4c12A5768D806021F80a262B4d39d26C58b8D
 * - Ethereum
 * - Optimism
 * - Gnosis
 * - Polygon
 * - Fantom
 * - Kava
 * - Arbitrum
 * - Avalanche
 * - Base at 0xd6681e74eEA20d196c15038C580f721EF2aB6320
 * https://github.com/curvefi/curve-router-ng/tree/master
 */
contract CurveRouterSwapper {
    using SafeERC20 for IERC20;

    /// @notice The address of the Curve Router contract
    // solhint-disable-next-line var-name-mixedcase
    // slither-disable-next-line naming-convention
    address private immutable _CURVE_ROUTER;

    /// @notice Struct to store parameters for a Curve swap
    struct CurveSwapParams {
        address[11] route;
        uint256[5][5] swapParams;
        address[5] pools;
    }

    /**
     * @dev Sets the Curve Router address on contract deployment.
     * @param curveRouter_ The address of the Curve Router.
     */
    constructor(address curveRouter_) payable {
        // Checks
        if (curveRouter_ == address(0)) {
            revert Errors.ZeroAddress();
        }
        // Effects
        _CURVE_ROUTER = curveRouter_;
    }

    /**
     * @dev Approves the Curve Router to spend the specified token.
     * @param token The ERC20 token address to approve.
     */
    function _approveTokenForSwap(address token) internal {
        IERC20(token).forceApprove(_CURVE_ROUTER, type(uint256).max);
    }

    /**
     * @dev Executes a token swap via the Curve Router.
     * @param curveSwapParams The parameters for the swap.
     * @param amount The amount of the input token to swap.
     * @param expected The minimum amount of the output token expected to receive.
     * @param receiver The address that will receive the output tokens.
     * @return The amount of the output token received from the swap.
     */
    function _swap(
        CurveSwapParams memory curveSwapParams,
        uint256 amount,
        uint256 expected,
        address receiver
    )
        internal
        returns (uint256)
    {
        return ICurveRouter(_CURVE_ROUTER).exchange(
            curveSwapParams.route, curveSwapParams.swapParams, amount, expected, curveSwapParams.pools, receiver
        );
    }

    /**
     * @dev Validates the swap parameters against the provided route and tokens.
     * @param curveSwapParams The parameters for the swap.
     * @param fromToken The address of the input token.
     * @param toToken The address of the output token.
     */
    function _validateSwapParams(
        CurveSwapParams memory curveSwapParams,
        address fromToken,
        address toToken
    )
        internal
        view
    {
        // Check if fromToken is in the route
        if (fromToken != curveSwapParams.route[0]) {
            revert Errors.InvalidFromToken(fromToken, curveSwapParams.route[0]);
        }
        // Check if toToken is in the route
        address toTokenInRoute = address(0);
        uint256 routeLength = curveSwapParams.route.length;
        for (uint256 i = 0; i < routeLength;) {
            if (curveSwapParams.route[i] == address(0)) {
                break;
            }
            toTokenInRoute = curveSwapParams.route[i];

            /// @dev The unchecked block is used here because the loop index `i` is simply incremented in each
            /// iteration, ensuring that `i` will not exceed the length of the array and cause an overflow. Underflow is
            /// not a concern as `i` is initialized to 0 and only incremented.
            unchecked {
                ++i;
            }
        }
        if (toTokenInRoute != toToken) {
            revert Errors.InvalidToToken(toToken, toTokenInRoute);
        }
        // Note that this does not check whether supplied token exists in the pool since the
        // get_dy function only relies on the indexes on swaps instead of addresses.
        try ICurveRouter(_CURVE_ROUTER).get_dy(
            curveSwapParams.route,
            curveSwapParams.swapParams,
            10 ** IERC20Metadata(fromToken).decimals(),
            curveSwapParams.pools
        ) returns (uint256 expected) {
            if (expected == 0) {
                revert Errors.ExpectedAmountZero();
            }
        } catch {
            revert Errors.InvalidSwapParams();
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.18;

import { IYearnStakingDelegate } from "src/interfaces/IYearnStakingDelegate.sol";
import { Errors } from "src/libraries/Errors.sol";
import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { IERC4626 } from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import { IYearnVaultV2 } from "src/interfaces/deps/yearn/veYFI/IYearnVaultV2.sol";

/**
 * @title YearnGaugeStrategyBase
 * @notice Abstract base contract for Yearn gauge strategies, handling deposits and withdrawals to the
 * YearnStakingDelegate.
 */
abstract contract YearnGaugeStrategyBase {
    // Libraries
    using SafeERC20 for IERC20;

    // Constant storage variables
    // solhint-disable const-name-snakecase
    /// @notice Address of the dYFI token
    address internal constant _DYFI = 0x41252E8691e964f7DE35156B68493bAb6797a275;
    /// @notice Address of the YFI token
    address internal constant _YFI = 0x0bc529c00C6401aEF6D220BE8C6Ea1667F6Ad93e;
    // solhint-enable const-name-snakecase

    // Immutable storage variables
    // solhint-disable immutable-vars-naming
    // slither-disable-start naming-convention
    /// @notice Address of the YearnStakingDelegate contract
    address internal immutable _YEARN_STAKING_DELEGATE;
    /// @notice Address of the vault's underlying asset
    address internal immutable _VAULT_ASSET;
    /// @notice Address of the Yearn vault
    address internal immutable _VAULT;
    // solhint-enable immutable-vars-naming
    // slither-disable-end naming-convention

    /**
     * @dev Sets the initial configuration of the strategy and approves the maximum amount of tokens to the
     * YearnStakingDelegate.
     * @param asset_ The address of the asset (gauge token).
     * @param yearnStakingDelegate_ The address of the Yearn Staking Delegate.
     */
    constructor(address asset_, address yearnStakingDelegate_) {
        address vault_ = IERC4626(asset_).asset();
        address vaultAsset_ = address(0);
        try IERC4626(vault_).asset() returns (address returnedVaultAsset) {
            vaultAsset_ = returnedVaultAsset;
        } catch {
            vaultAsset_ = IYearnVaultV2(vault_).token();
        }
        // Check for zero addresses
        if (yearnStakingDelegate_ == address(0) || vault_ == address(0) || vaultAsset_ == address(0)) {
            revert Errors.ZeroAddress();
        }

        // Effects
        // Set storage variable values
        _YEARN_STAKING_DELEGATE = yearnStakingDelegate_;
        _VAULT = vault_;
        _VAULT_ASSET = vaultAsset_;

        // Interactions
        IERC20(asset_).forceApprove(yearnStakingDelegate_, type(uint256).max);
        IERC20(vaultAsset_).forceApprove(vault_, type(uint256).max);
        IERC20(vault_).forceApprove(asset_, type(uint256).max);
    }

    /**
     * @notice Get the address of the YearnStakingDelegate.
     * @return The address of the YearnStakingDelegate.
     */
    function yearnStakingDelegate() external view returns (address) {
        return _YEARN_STAKING_DELEGATE;
    }

    /**
     * @notice Get the address of the vault's underlying asset. This is the asset that is deposited into the
     * vault which then is deposited into the gauge.
     * @return The address of the vault's underlying asset.
     */
    function vaultAsset() external view returns (address) {
        return _VAULT_ASSET;
    }

    /**
     * @notice Get the address of the vault. This is the Yearn vault that the gauge is for.
     * @return The address of the vault.
     */
    function vault() external view returns (address) {
        return _VAULT;
    }

    /**
     * @dev Internal function to deposit assets into the YearnStakingDelegate.
     * @param asset The address of the asset to deposit.
     * @param amount The amount of the asset to deposit.
     */
    function _depositToYSD(address asset, uint256 amount) internal virtual {
        IYearnStakingDelegate(_YEARN_STAKING_DELEGATE).deposit(asset, amount);
    }

    /**
     * @dev Internal function to withdraw assets from the YearnStakingDelegate.
     * @param asset The address of the asset to withdraw.
     * @param amount The amount of the asset to withdraw.
     */
    function _withdrawFromYSD(address asset, uint256 amount) internal virtual {
        // Withdraw gauge from YSD which transfers to msg.sender
        IYearnStakingDelegate(_YEARN_STAKING_DELEGATE).withdraw(asset, amount);
    }

    /**
     * @notice Return the amount of the asset deposited by this contract in the YearnStakingDelegate.
     * @param asset The address of the asset to check.
     * @return The amount of the asset deposited in the YearnStakingDelegate.
     */
    function depositedInYSD(address asset) public view returns (uint256) {
        return IYearnStakingDelegate(_YEARN_STAKING_DELEGATE).balanceOf(address(this), asset);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.18;

import { IVotingYFI } from "./deps/yearn/veYFI/IVotingYFI.sol";

interface IYearnStakingDelegate {
    // Struct definitions
    struct RewardSplit {
        uint64 treasury;
        uint64 coveYfi;
        uint64 user;
        uint64 lock;
    }

    struct ExitRewardSplit {
        uint128 treasury;
        uint128 coveYfi;
    }

    struct BoostRewardSplit {
        uint128 treasury;
        uint128 coveYfi;
    }

    function deposit(address gauge, uint256 amount) external;
    function withdraw(address gauge, uint256 amount) external;
    function withdraw(address gauge, uint256 amount, address receiver) external;
    function lockYfi(uint256 amount) external returns (IVotingYFI.LockedBalance memory);
    function harvest(address vault) external returns (uint256);
    function setCoveYfiRewardForwarder(address forwarder) external;
    function setGaugeRewardSplit(
        address gauge,
        uint64 treasuryPct,
        uint64 coveYfiPct,
        uint64 userPct,
        uint64 veYfiPct
    )
        external;

    function setBoostRewardSplit(uint128 treasuryPct, uint128 coveYfiPct) external;
    function setExitRewardSplit(uint128 treasuryPct, uint128 coveYfiPct) external;
    function setSwapAndLock(address swapAndLock) external;
    function balanceOf(address user, address gauge) external view returns (uint256);
    function totalDeposited(address gauge) external view returns (uint256);
    function depositLimit(address gauge) external view returns (uint256);
    function availableDepositLimit(address gauge) external view returns (uint256);
    function gaugeStakingRewards(address gauge) external view returns (address);
    function gaugeRewardReceivers(address gauge) external view returns (address);
    function getGaugeRewardSplit(address gauge) external view returns (RewardSplit memory);
    function getBoostRewardSplit() external view returns (BoostRewardSplit memory);
    function getExitRewardSplit() external view returns (ExitRewardSplit memory);
    function treasury() external view returns (address);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.8.18;

/// @title Errors
/// @notice Library containing all custom errors the protocol may revert with.
library Errors {
    //// MASTER REGISTRY ////

    /// @notice Thrown when the registry name given is empty.
    error NameEmpty();

    /// @notice Thrown when the registry address given is empty.
    error AddressEmpty();

    /// @notice Thrown when the registry name is found when calling addRegistry().
    error RegistryNameFound(bytes32 name);

    /// @notice Thrown when the registry name is not found but is expected to be.
    error RegistryNameNotFound(bytes32 name);

    /// @notice Thrown when the registry address is not found but is expected to be.
    error RegistryAddressNotFound(address registryAddress);

    /// @notice Thrown when the registry name and version is not found but is expected to be.
    error RegistryNameVersionNotFound(bytes32 name, uint256 version);

    /// @notice Thrown when a duplicate registry address is found.
    error DuplicateRegistryAddress(address registryAddress);

    //// YEARN STAKING DELEGATE ////

    /// @notice Error for when an address is zero which is not allowed.
    error ZeroAddress();

    /// @notice Error for when an amount is zero which is not allowed.
    error ZeroAmount();

    /// @notice Error for when a reward split is invalid.
    error InvalidRewardSplit();

    /// @notice Error for when the treasury percentage is too high.
    error TreasuryPctTooHigh();

    /// @notice Error for when perpetual lock is enabled and an action cannot be taken.
    error PerpetualLockEnabled();

    /// @notice Error for when perpetual lock is disabled and an action cannot be taken.
    error PerpetualLockDisabled();

    /// @notice Error for when swap and lock settings are not set.
    error SwapAndLockNotSet();

    /// @notice Error for when gauge rewards have already been added.
    error GaugeRewardsAlreadyAdded();

    /// @notice Error for when gauge rewards have not yet been added.
    error GaugeRewardsNotYetAdded();

    /// @notice Error for when execution of an action is not allowed.
    error ExecutionNotAllowed();

    /// @notice Error for when execution of an action has failed.
    error ExecutionFailed();

    /// @notice Error for when Cove YFI reward forwarder is not set.
    error CoveYfiRewardForwarderNotSet();

    //// STAKING DELEGATE REWARDS ////

    /// @notice Error for when a rescue operation is not allowed.
    error RescueNotAllowed();

    /// @notice Error for when the previous rewards period has not been completed.
    error PreviousRewardsPeriodNotCompleted();

    /// @notice Error for when only the staking delegate can update a user's balance.
    error OnlyStakingDelegateCanUpdateUserBalance();

    /// @notice Error for when only the staking delegate can add a staking token.
    error OnlyStakingDelegateCanAddStakingToken();

    /// @notice Error for when only the reward distributor can notify the reward amount.
    error OnlyRewardDistributorCanNotifyRewardAmount();

    /// @notice Error for when a staking token has already been added.
    error StakingTokenAlreadyAdded();

    /// @notice Error for when a staking token has not been added.
    error StakingTokenNotAdded();

    /// @notice Error for when the reward rate is too low.
    error RewardRateTooLow();

    /// @notice Error for when the reward duration cannot be zero.
    error RewardDurationCannotBeZero();

    //// WRAPPED STRATEGY CURVE SWAPPER ////

    /// @notice Error for when slippage is too high.
    error SlippageTooHigh();

    /// @notice Error for when invalid tokens are received.
    error InvalidTokensReceived();

    /// CURVE ROUTER SWAPPER ///

    /*
     * @notice Error for when the from token is invalid.
     * @param intendedFromToken The intended from token address.
     * @param actualFromToken The actual from token address received.
     */
    error InvalidFromToken(address intendedFromToken, address actualFromToken);

    /*
     * @notice Error for when the to token is invalid.
     * @param intendedToToken The intended to token address.
     * @param actualToToken The actual to token address received.
     */
    error InvalidToToken(address intendedToToken, address actualToToken);

    /// @notice Error for when the expected amount is zero.
    error ExpectedAmountZero();

    /// @notice Error for when swap parameters are invalid.
    error InvalidSwapParams();

    /// SWAP AND LOCK ///

    /// @notice Error for when the same address is used in a context where it is not allowed.
    error SameAddress();

    //// COVEYFI ////

    /// @notice Error for when only minting is enabled.
    error OnlyMintingEnabled();

    /// RESCUABLE ///

    /// @notice Error for when an ETH transfer of zero is attempted.
    error ZeroEthTransfer();

    /// @notice Error for when an ETH transfer fails.
    error EthTransferFailed();

    /// @notice Error for when a token transfer of zero is attempted.
    error ZeroTokenTransfer();

    /// GAUGE REWARD RECEIVER ///

    /// @notice Error for when an action is not authorized.
    error NotAuthorized();

    /// @notice Error for when rescuing a reward token is not allowed.
    error CannotRescueRewardToken();

    /// DYFI REDEEMER ///

    /// @notice Error for when an array length is invalid.
    error InvalidArrayLength();

    /// @notice Error for when a price feed is outdated.
    error PriceFeedOutdated();

    /// @notice Error for when a price feed round is incorrect.
    error PriceFeedIncorrectRound();

    /// @notice Error for when a price feed returns a zero price.
    error PriceFeedReturnedZeroPrice();

    /// @notice Error for when there is no DYFI to redeem.
    error NoDYfiToRedeem();

    /// @notice Error for when an ETH transfer for caller reward fails.
    error CallerRewardEthTransferFailed();

    /// COVE YEARN GAUGE FACTORY ///

    /// @notice Error for when a gauge has already been deployed.
    error GaugeAlreadyDeployed();

    /// @notice Error for when a gauge has not been deployed.
    error GaugeNotDeployed();

    /// MINICHEF V3 ////

    /// @notice Error for when an LP token is invalid.
    error InvalidLPToken();

    /// @notice Error for when an LP token has not been added.
    error LPTokenNotAdded();

    /// @notice Error for when an LP token does not match the pool ID.
    error LPTokenDoesNotMatchPoolId();

    /// @notice Error for when there is an insufficient balance.
    error InsufficientBalance();

    /// @notice Error for when an LP token has already been added.
    error LPTokenAlreadyAdded();

    /// @notice Error for when the reward rate is too high.
    error RewardRateTooHigh();

    /// Yearn4626RouterExt ///

    /// @notice Error for when there are insufficient shares.
    error InsufficientShares();

    /// @notice Error for when the 'to' address is invalid.
    error InvalidTo();

    /// @notice Error esure the has enough remaining gas.
    error InsufficientGas();

    /// TESTING ///

    /// @notice Error for when there is not enough balance to take away.
    error TakeAwayNotEnoughBalance();

    /// @notice Error for when a strategy has not been added to a vault.
    error StrategyNotAddedToVault();

    /// COVE TOKEN ///

    /// @notice Error for when a transfer is attempted before it is allowed.
    error TransferNotAllowedYet();

    /// @notice Error for when an address is being added as both a sender and a receiver.
    error CannotBeBothSenderAndReceiver();

    /// @notice Error for when an unpause is attempted too early.
    error UnpauseTooEarly();

    /// @notice Error for when the pause period is too long.
    error PausePeriodTooLong();

    /// @notice Error for when minting is attempted too early.
    error MintingAllowedTooEarly();

    /// @notice Error for when the mint amount exceeds the cap.
    error InflationTooLarge();

    /*
     * @notice Error for when an unauthorized account attempts an action requiring a specific role.
     * @param account The account attempting the unauthorized action.
     * @param neededRole The role required for the action.
     */
    error AccessControlEnumerableUnauthorizedAccount(address account, bytes32 neededRole);

    /// @notice Error for when an action is unauthorized.
    error Unauthorized();

    /// @notice Error for when a pause is expected but not enacted.
    error ExpectedPause();

    /// COVE YEARN GAUGE FACTORY ///

    /// @notice Error for when an address is not a contract.
    error AddressNotContract();
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC4626} from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";

// Interface that implements the 4626 standard and the implementation functions
interface ITokenizedStrategy is IERC4626, IERC20Permit {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event StrategyShutdown();

    event NewTokenizedStrategy(
        address indexed strategy,
        address indexed asset,
        string apiVersion
    );

    event Reported(
        uint256 profit,
        uint256 loss,
        uint256 protocolFees,
        uint256 performanceFees
    );

    event UpdatePerformanceFeeRecipient(
        address indexed newPerformanceFeeRecipient
    );

    event UpdateKeeper(address indexed newKeeper);

    event UpdatePerformanceFee(uint16 newPerformanceFee);

    event UpdateManagement(address indexed newManagement);

    event UpdateEmergencyAdmin(address indexed newEmergencyAdmin);

    event UpdateProfitMaxUnlockTime(uint256 newProfitMaxUnlockTime);

    event UpdatePendingManagement(address indexed newPendingManagement);

    /*//////////////////////////////////////////////////////////////
                           INITIALIZATION
    //////////////////////////////////////////////////////////////*/

    function initialize(
        address _asset,
        string memory _name,
        address _management,
        address _performanceFeeRecipient,
        address _keeper
    ) external;

    /*//////////////////////////////////////////////////////////////
                    NON-STANDARD 4626 OPTIONS
    //////////////////////////////////////////////////////////////*/

    function withdraw(
        uint256 assets,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    function redeem(
        uint256 shares,
        address receiver,
        address owner,
        uint256 maxLoss
    ) external returns (uint256);

    /*//////////////////////////////////////////////////////////////
                        MODIFIER HELPERS
    //////////////////////////////////////////////////////////////*/

    function requireManagement(address _sender) external view;

    function requireKeeperOrManagement(address _sender) external view;

    function requireEmergencyAuthorized(address _sender) external view;

    /*//////////////////////////////////////////////////////////////
                        KEEPERS FUNCTIONS
    //////////////////////////////////////////////////////////////*/

    function tend() external;

    function report() external returns (uint256 _profit, uint256 _loss);

    /*//////////////////////////////////////////////////////////////
                        CONSTANTS
    //////////////////////////////////////////////////////////////*/

    function MAX_FEE() external view returns (uint16);

    function FACTORY() external view returns (address);

    /*//////////////////////////////////////////////////////////////
                            GETTERS
    //////////////////////////////////////////////////////////////*/

    function apiVersion() external view returns (string memory);

    function pricePerShare() external view returns (uint256);

    function management() external view returns (address);

    function pendingManagement() external view returns (address);

    function keeper() external view returns (address);

    function emergencyAdmin() external view returns (address);

    function performanceFee() external view returns (uint16);

    function performanceFeeRecipient() external view returns (address);

    function fullProfitUnlockDate() external view returns (uint256);

    function profitUnlockingRate() external view returns (uint256);

    function profitMaxUnlockTime() external view returns (uint256);

    function lastReport() external view returns (uint256);

    function isShutdown() external view returns (bool);

    function unlockedShares() external view returns (uint256);

    /*//////////////////////////////////////////////////////////////
                            SETTERS
    //////////////////////////////////////////////////////////////*/

    function setPendingManagement(address) external;

    function acceptManagement() external;

    function setKeeper(address _keeper) external;

    function setEmergencyAdmin(address _emergencyAdmin) external;

    function setPerformanceFee(uint16 _performanceFee) external;

    function setPerformanceFeeRecipient(
        address _performanceFeeRecipient
    ) external;

    function setProfitMaxUnlockTime(uint256 _profitMaxUnlockTime) external;

    function shutdownStrategy() external;

    function emergencyWithdraw(uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

interface ICurveRouter {
    /**
     * @notice Performs an exchange operation.
     * @dev `route` and `swapParams` should be determined off chain.
     * @param route An array of [initial token, pool or zap, token, pool or zap, token, ...]. The iteration continues
     * until a pool address of 0x00, then the last given token is transferred to `_receiver`
     * @param swapParams A multidimensional array of [i, j, swap type, pool_type, n_coins] where:
     * i is the index of the input token,
     * j is the index of the output token,
     * swap type should be:
     *         - 1 for `exchange`,
     *         - 2 for `exchange_underlying`,
     *         - 3 for underlying exchange via zap: factory stable metapools with lending base pool
     * `exchange_underlying` and factory crypto-metapools underlying exchange (`exchange` method in zap);
     *         - 4 for coin -> LP token "exchange" (actually `add_liquidity`),
     *         - 5 for lending pool underlying coin -> LP token "exchange" (actually `add_liquidity`),
     *         - 6 for LP token -> coin "exchange" (actually `remove_liquidity_one_coin`),
     *         - 7 for LP token -> lending or fake pool underlying coin "exchange" (actually
     * `remove_liquidity_one_coin`),
     *         - 8 for ETH <-> WETH, ETH -> stETH or ETH -> frxETH, stETH <-> wstETH, frxETH <-> sfrxETH, ETH -> wBETH,
     *         - 9 for SNX swaps (sUSD, sEUR, sETH, sBTC)
     *         Pool type:
     *         - 1 - stable, 2 - crypto, 3 - tricrypto, 4 - llama
     *         `n_coins` indicates the number of coins in the pool
     * @param amount The amount of `route[0]` to be sent.
     * @param expected The minimum amount received after the final swap.
     * @return The received amount of the final output token.
     */
    function exchange(
        address[11] calldata route,
        uint256[5][5] calldata swapParams,
        uint256 amount,
        uint256 expected
    )
        external
        payable
        returns (uint256);

    /**
     * @notice Performs up to 5 swaps in a single transaction.
     * @dev Routing and swap params must be determined off-chain. This functionality is designed for gas efficiency over
     * ease-of-use.
     * @param route Array of the route.
     * @param swapParams Parameters for the swap operation.
     * @param amount The amount of `route[0]` to be sent.
     * @param expected The minimum amount expected after all the swaps.
     * @param pools Array of pool addresses for swaps via zap contracts. Needed only for swap type = 3.
     * @param receiver The address to transfer the final output token to.
     * @return The received amount of the final output token.
     */
    function exchange(
        address[11] calldata route,
        uint256[5][5] calldata swapParams,
        uint256 amount,
        uint256 expected,
        address[5] calldata pools,
        address receiver
    )
        external
        payable
        returns (uint256);

    /**
     * @notice Executes an exchange operation.
     * @param route Array containing the route for exchange.
     * @param swapParams Parameters for the swap operation.
     * @param amount The amount of input token to be sent.
     * @param expected The minimum amount expected after the exchange.
     * @param pools Array of pool addresses for swaps via zap contracts.
     * @return The received amount of the final output token.
     */
    function exchange(
        address[11] calldata route,
        uint256[5][5] calldata swapParams,
        uint256 amount,
        uint256 expected,
        address[5] calldata pools
    )
        external
        payable
        returns (uint256);

    function get_dy(
        address[11] calldata route,
        uint256[5][5] calldata swapParams,
        uint256 amount,
        address[5] calldata pools
    )
        external
        view
        returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

// @dev YearnVaultV2 does not follow ERC4626 interface for `asset()` instead it uses `token()`
interface IYearnVaultV2 {
    function token() external view returns (address);
    function deposit(uint256 amount, address recipient) external returns (uint256 shares);
    function deposit(uint256 amount) external returns (uint256 shares);
    function withdraw(uint256 shares, address recipient) external returns (uint256 amount);
    function pricePerShare() external view returns (uint256);
    function totalSupply() external view returns (uint256);
    function totalAssets() external view returns (uint256);
    function lastReport() external view returns (uint256);
    function lockedProfitDegradation() external view returns (uint256);
    function lockedProfit() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IVotingYFI is IERC20 {
    event ModifyLock(address indexed sender, address indexed user, uint256 amount, uint256 locktime, uint256 ts);
    event Withdraw(address indexed user, uint256 amount, uint256 ts);
    event Penalty(address indexed user, uint256 amount, uint256 ts);
    event Supply(uint256 oldSupply, uint256 newSupply, uint256 ts);

    struct LockedBalance {
        uint256 amount;
        uint256 end;
    }

    struct Withdrawn {
        uint256 amount;
        uint256 penalty;
    }

    struct Point {
        int128 bias;
        int128 slope;
        uint256 ts;
        uint256 blk;
    }

    function totalSupply() external view returns (uint256);

    function locked(address _user) external view returns (LockedBalance memory);

    function modify_lock(
        uint256 _amount,
        uint256 _unlock_time,
        address _user
    )
        external
        returns (LockedBalance memory);

    function withdraw() external returns (Withdrawn memory);

    function point_history(address user, uint256 epoch) external view returns (Point memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

{
  "remappings": [
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@openzeppelin-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "tokenized-strategy/=lib/tokenized-strategy/src/",
    "yearn-vaults-v3/=lib/yearn-vaults-v3/contracts/",
    "Yearn-ERC4626-Router/=lib/Yearn-ERC4626-Router/src/",
    "solmate/=lib/permit2/lib/solmate/src/",
    "permit2/=lib/permit2/src/",
    "forge-std/=lib/forge-std/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "@crytic/properties/=lib/properties/",
    "forge-deploy/=lib/forge-deploy/contracts/",
    "script/=script/",
    "src/=src/",
    "test/=test/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"asset_","type":"address"},{"internalType":"address","name":"yearnStakingDelegate_","type":"address"},{"internalType":"address","name":"curveRouter_","type":"address"}],"stateMutability":"payable","type":"constructor"},{"inputs":[],"name":"ExpectedAmountZero","type":"error"},{"inputs":[{"internalType":"address","name":"intendedFromToken","type":"address"},{"internalType":"address","name":"actualFromToken","type":"address"}],"name":"InvalidFromToken","type":"error"},{"inputs":[],"name":"InvalidSwapParams","type":"error"},{"inputs":[{"internalType":"address","name":"intendedToToken","type":"address"},{"internalType":"address","name":"actualToToken","type":"address"}],"name":"InvalidToToken","type":"error"},{"inputs":[],"name":"SameAddress","type":"error"},{"inputs":[],"name":"ZeroAddress","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldDYfiRedeemer","type":"address"},{"indexed":false,"internalType":"address","name":"newDYfiRedeemer","type":"address"}],"name":"DYfiRedeemerSet","type":"event"},{"stateMutability":"nonpayable","type":"fallback"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"availableDepositLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"availableWithdrawLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"dYfiRedeemer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deployFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"asset","type":"address"}],"name":"depositedInYSD","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"freeFunds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"harvestAndReport","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newDYfiRedeemer","type":"address"}],"name":"setDYfiRedeemer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address[11]","name":"route","type":"address[11]"},{"internalType":"uint256[5][5]","name":"swapParams","type":"uint256[5][5]"},{"internalType":"address[5]","name":"pools","type":"address[5]"}],"internalType":"struct CurveRouterSwapper.CurveSwapParams","name":"curveSwapParams","type":"tuple"}],"name":"setHarvestSwapParams","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"shutdownWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_totalIdle","type":"uint256"}],"name":"tendThis","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tendTrigger","outputs":[{"internalType":"bool","name":"","type":"bool"},{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenizedStrategyAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vaultAsset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"yearnStakingDelegate","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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