Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.9;

import "../libraries/ExceptionsLibrary.sol";
import "../strategies/LStrategy.sol";
import "./DefaultAccessControl.sol";

contract RebalanceWrapper is DefaultAccessControl {
    LStrategy public immutable strategy;
    int24 public maxTicksDelta;

    constructor(
        address admin,
        address strategy_,
        int24 initialDelta
    ) DefaultAccessControl(admin) {
        strategy = LStrategy(strategy_);
        maxTicksDelta = initialDelta;
    }

    function setDelta(int24 newMaxTicksDelta) external {
        _requireAdmin();
        maxTicksDelta = newMaxTicksDelta;
    }

    function rebalanceUniV3Vaults(int24 offchainTick, uint256 deadline)
        external
        returns (
            uint256[] memory pulledAmounts,
            uint256[] memory pushedAmounts,
            uint128 depositLiquidity,
            uint128 withdrawLiquidity,
            bool lowerToUpper
        )
    {
        _requireAtLeastOperator();
        _checkPoolState(offchainTick);
        uint256[] memory minValues = new uint256[](2);

        (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity, lowerToUpper) = strategy
            .rebalanceUniV3Vaults(minValues, minValues, deadline);
    }

    function rebalanceERC20UniV3Vaults(int24 offchainTick, uint256 deadline)
        external
        returns (
            uint256[] memory totalPulledAmounts,
            bool isNegativeCapitalDelta,
            uint256 percentageIncreaseD
        )
    {
        _requireAtLeastOperator();
        _checkPoolState(offchainTick);
        uint256[] memory minValues = new uint256[](2);

        (totalPulledAmounts, isNegativeCapitalDelta, percentageIncreaseD) = strategy.rebalanceERC20UniV3Vaults(
            minValues,
            minValues,
            deadline
        );
    }

    function _checkPoolState(int24 offchainTick) internal view {
        IUniswapV3Pool pool = strategy.lowerVault().pool();
        (, int24 spotTick, , , , , ) = pool.slot0();
        require(
            offchainTick + maxTicksDelta >= spotTick && offchainTick - maxTicksDelta <= spotTick,
            ExceptionsLibrary.INVALID_STATE
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        _roleMembers[role].remove(account);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "./utils/IDefaultAccessControl.sol";
import "./IUnitPricesGovernance.sol";

interface IProtocolGovernance is IDefaultAccessControl, IUnitPricesGovernance {
    /// @notice CommonLibrary protocol params.
    /// @param maxTokensPerVault Max different token addresses that could be managed by the vault
    /// @param governanceDelay The delay (in secs) that must pass before setting new pending params to commiting them
    /// @param protocolTreasury The address that collects protocolFees, if protocolFee is not zero
    /// @param forceAllowMask If a permission bit is set in this mask it forces all addresses to have this permission as true
    /// @param withdrawLimit Withdraw limit (in unit prices, i.e. usd)
    struct Params {
        uint256 maxTokensPerVault;
        uint256 governanceDelay;
        address protocolTreasury;
        uint256 forceAllowMask;
        uint256 withdrawLimit;
    }

    // -------------------  EXTERNAL, VIEW  -------------------

    /// @notice Timestamp after which staged granted permissions for the given address can be committed.
    /// @param target The given address
    /// @return Zero if there are no staged permission grants, timestamp otherwise
    function stagedPermissionGrantsTimestamps(address target) external view returns (uint256);

    /// @notice Staged granted permission bitmask for the given address.
    /// @param target The given address
    /// @return Bitmask
    function stagedPermissionGrantsMasks(address target) external view returns (uint256);

    /// @notice Permission bitmask for the given address.
    /// @param target The given address
    /// @return Bitmask
    function permissionMasks(address target) external view returns (uint256);

    /// @notice Timestamp after which staged pending protocol parameters can be committed
    /// @return Zero if there are no staged parameters, timestamp otherwise.
    function stagedParamsTimestamp() external view returns (uint256);

    /// @notice Staged pending protocol parameters.
    function stagedParams() external view returns (Params memory);

    /// @notice Current protocol parameters.
    function params() external view returns (Params memory);

    /// @notice Addresses for which non-zero permissions are set.
    function permissionAddresses() external view returns (address[] memory);

    /// @notice Permission addresses staged for commit.
    function stagedPermissionGrantsAddresses() external view returns (address[] memory);

    /// @notice Return all addresses where rawPermissionMask bit for permissionId is set to 1.
    /// @param permissionId Id of the permission to check.
    /// @return A list of dirty addresses.
    function addressesByPermission(uint8 permissionId) external view returns (address[] memory);

    /// @notice Checks if address has permission or given permission is force allowed for any address.
    /// @param addr Address to check
    /// @param permissionId Permission to check
    function hasPermission(address addr, uint8 permissionId) external view returns (bool);

    /// @notice Checks if address has all permissions.
    /// @param target Address to check
    /// @param permissionIds A list of permissions to check
    function hasAllPermissions(address target, uint8[] calldata permissionIds) external view returns (bool);

    /// @notice Max different ERC20 token addresses that could be managed by the protocol.
    function maxTokensPerVault() external view returns (uint256);

    /// @notice The delay for committing any governance params.
    function governanceDelay() external view returns (uint256);

    /// @notice The address of the protocol treasury.
    function protocolTreasury() external view returns (address);

    /// @notice Permissions mask which defines if ordinary permission should be reverted.
    /// This bitmask is xored with ordinary mask.
    function forceAllowMask() external view returns (uint256);

    /// @notice Withdraw limit per token per block.
    /// @param token Address of the token
    /// @return Withdraw limit per token per block
    function withdrawLimit(address token) external view returns (uint256);

    /// @notice Addresses that has staged validators.
    function stagedValidatorsAddresses() external view returns (address[] memory);

    /// @notice Timestamp after which staged granted permissions for the given address can be committed.
    /// @param target The given address
    /// @return Zero if there are no staged permission grants, timestamp otherwise
    function stagedValidatorsTimestamps(address target) external view returns (uint256);

    /// @notice Staged validator for the given address.
    /// @param target The given address
    /// @return Validator
    function stagedValidators(address target) external view returns (address);

    /// @notice Addresses that has validators.
    function validatorsAddresses() external view returns (address[] memory);

    /// @notice Address that has validators.
    /// @param i The number of address
    /// @return Validator address
    function validatorsAddress(uint256 i) external view returns (address);

    /// @notice Validator for the given address.
    /// @param target The given address
    /// @return Validator
    function validators(address target) external view returns (address);

    // -------------------  EXTERNAL, MUTATING, GOVERNANCE, IMMEDIATE  -------------------

    /// @notice Rollback all staged validators.
    function rollbackStagedValidators() external;

    /// @notice Revoke validator instantly from the given address.
    /// @param target The given address
    function revokeValidator(address target) external;

    /// @notice Stages a new validator for the given address
    /// @param target The given address
    /// @param validator The validator for the given address
    function stageValidator(address target, address validator) external;

    /// @notice Commits validator for the given address.
    /// @dev Reverts if governance delay has not passed yet.
    /// @param target The given address.
    function commitValidator(address target) external;

    /// @notice Commites all staged validators for which governance delay passed
    /// @return Addresses for which validators were committed
    function commitAllValidatorsSurpassedDelay() external returns (address[] memory);

    /// @notice Rollback all staged granted permission grant.
    function rollbackStagedPermissionGrants() external;

    /// @notice Commits permission grants for the given address.
    /// @dev Reverts if governance delay has not passed yet.
    /// @param target The given address.
    function commitPermissionGrants(address target) external;

    /// @notice Commites all staged permission grants for which governance delay passed.
    /// @return An array of addresses for which permission grants were committed.
    function commitAllPermissionGrantsSurpassedDelay() external returns (address[] memory);

    /// @notice Revoke permission instantly from the given address.
    /// @param target The given address.
    /// @param permissionIds A list of permission ids to revoke.
    function revokePermissions(address target, uint8[] memory permissionIds) external;

    /// @notice Commits staged protocol params.
    /// Reverts if governance delay has not passed yet.
    function commitParams() external;

    // -------------------  EXTERNAL, MUTATING, GOVERNANCE, DELAY  -------------------

    /// @notice Sets new pending params that could have been committed after governance delay expires.
    /// @param newParams New protocol parameters to set.
    function stageParams(Params memory newParams) external;

    /// @notice Stage granted permissions that could have been committed after governance delay expires.
    /// Resets commit delay and permissions if there are already staged permissions for this address.
    /// @param target Target address
    /// @param permissionIds A list of permission ids to grant
    function stagePermissionGrants(address target, uint8[] memory permissionIds) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "./utils/IDefaultAccessControl.sol";

interface IUnitPricesGovernance is IDefaultAccessControl, IERC165 {
    // -------------------  EXTERNAL, VIEW  -------------------

    /// @notice Estimated amount of token worth 1 USD staged for commit.
    /// @param token Address of the token
    /// @return The amount of token
    function stagedUnitPrices(address token) external view returns (uint256);

    /// @notice Timestamp after which staged unit prices for the given token can be committed.
    /// @param token Address of the token
    /// @return Timestamp
    function stagedUnitPricesTimestamps(address token) external view returns (uint256);

    /// @notice Estimated amount of token worth 1 USD.
    /// @param token Address of the token
    /// @return The amount of token
    function unitPrices(address token) external view returns (uint256);

    // -------------------  EXTERNAL, MUTATING  -------------------

    /// @notice Stage estimated amount of token worth 1 USD staged for commit.
    /// @param token Address of the token
    /// @param value The amount of token
    function stageUnitPrice(address token, uint256 value) external;

    /// @notice Reset staged value
    /// @param token Address of the token
    function rollbackUnitPrice(address token) external;

    /// @notice Commit staged unit price
    /// @param token Address of the token
    function commitUnitPrice(address token) external;
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.9;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "./IProtocolGovernance.sol";

interface IVaultRegistry is IERC721 {
    /// @notice Get Vault for the giver NFT ID.
    /// @param nftId NFT ID
    /// @return vault Address of the Vault contract
    function vaultForNft(uint256 nftId) external view returns (address vault);

    /// @notice Get NFT ID for given Vault contract address.
    /// @param vault Address of the Vault contract
    /// @return nftId NFT ID
    function nftForVault(address vault) external view returns (uint256 nftId);

    /// @notice Checks if the nft is locked for all transfers
    /// @param nft NFT to check for lock
    /// @return `true` if locked, false otherwise
    function isLocked(uint256 nft) external view returns (bool);

    /// @notice Register new Vault and mint NFT.
    /// @param vault address of the vault
    /// @param owner owner of the NFT
    /// @return nft Nft minted for the given Vault
    function registerVault(address vault, address owner) external returns (uint256 nft);

    /// @notice Number of Vaults registered.
    function vaultsCount() external view returns (uint256);

    /// @notice All Vaults registered.
    function vaults() external view returns (address[] memory);

    /// @notice Address of the ProtocolGovernance.
    function protocolGovernance() external view returns (IProtocolGovernance);

    /// @notice Address of the staged ProtocolGovernance.
    function stagedProtocolGovernance() external view returns (IProtocolGovernance);

    /// @notice Minimal timestamp when staged ProtocolGovernance can be applied.
    function stagedProtocolGovernanceTimestamp() external view returns (uint256);

    /// @notice Stage new ProtocolGovernance.
    /// @param newProtocolGovernance new ProtocolGovernance
    function stageProtocolGovernance(IProtocolGovernance newProtocolGovernance) external;

    /// @notice Commit new ProtocolGovernance.
    function commitStagedProtocolGovernance() external;

    /// @notice Lock NFT for transfers
    /// @dev Use this method when vault structure is set up and should become immutable. Can be called by owner.
    /// @param nft - NFT to lock
    function lockNft(uint256 nft) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

interface IERC1271 {
    /// @notice Verifies offchain signature.
    /// @dev Should return whether the signature provided is valid for the provided hash
    ///
    /// MUST return the bytes4 magic value 0x1626ba7e when function passes.
    ///
    /// MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
    ///
    /// MUST allow external calls
    /// @param _hash Hash of the data to be signed
    /// @param _signature Signature byte array associated with _hash
    /// @return magicValue 0x1626ba7e if valid, 0xffffffff otherwise
    function isValidSignature(bytes32 _hash, bytes memory _signature) external view returns (bytes4 magicValue);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.8.9;
pragma abicoder v2;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "./IPeripheryImmutableState.sol";

/// @title Non-fungible token for positions
/// @notice Wraps Uniswap V3 positions in a non-fungible token interface which allows for them to be transferred
/// and authorized.
interface INonfungiblePositionManager is IPeripheryImmutableState, IERC721 {
    /// @notice Emitted when liquidity is increased for a position NFT
    /// @dev Also emitted when a token is minted
    /// @param tokenId The ID of the token for which liquidity was increased
    /// @param liquidity The amount by which liquidity for the NFT position was increased
    /// @param amount0 The amount of token0 that was paid for the increase in liquidity
    /// @param amount1 The amount of token1 that was paid for the increase in liquidity
    event IncreaseLiquidity(uint256 indexed tokenId, uint128 liquidity, uint256 amount0, uint256 amount1);
    /// @notice Emitted when liquidity is decreased for a position NFT
    /// @param tokenId The ID of the token for which liquidity was decreased
    /// @param liquidity The amount by which liquidity for the NFT position was decreased
    /// @param amount0 The amount of token0 that was accounted for the decrease in liquidity
    /// @param amount1 The amount of token1 that was accounted for the decrease in liquidity
    event DecreaseLiquidity(uint256 indexed tokenId, uint128 liquidity, uint256 amount0, uint256 amount1);
    /// @notice Emitted when tokens are collected for a position NFT
    /// @dev The amounts reported may not be exactly equivalent to the amounts transferred, due to rounding behavior
    /// @param tokenId The ID of the token for which underlying tokens were collected
    /// @param recipient The address of the account that received the collected tokens
    /// @param amount0 The amount of token0 owed to the position that was collected
    /// @param amount1 The amount of token1 owed to the position that was collected
    event Collect(uint256 indexed tokenId, address recipient, uint256 amount0, uint256 amount1);

    /// @notice Returns the position information associated with a given token ID.
    /// @dev Throws if the token ID is not valid.
    /// @param tokenId The ID of the token that represents the position
    /// @return nonce The nonce for permits
    /// @return operator The address that is approved for spending
    /// @return token0 The address of the token0 for a specific pool
    /// @return token1 The address of the token1 for a specific pool
    /// @return fee The fee associated with the pool
    /// @return tickLower The lower end of the tick range for the position
    /// @return tickUpper The higher end of the tick range for the position
    /// @return liquidity The liquidity of the position
    /// @return feeGrowthInside0LastX128 The fee growth of token0 as of the last action on the individual position
    /// @return feeGrowthInside1LastX128 The fee growth of token1 as of the last action on the individual position
    /// @return tokensOwed0 The uncollected amount of token0 owed to the position as of the last computation
    /// @return tokensOwed1 The uncollected amount of token1 owed to the position as of the last computation
    function positions(uint256 tokenId)
        external
        view
        returns (
            uint96 nonce,
            address operator,
            address token0,
            address token1,
            uint24 fee,
            int24 tickLower,
            int24 tickUpper,
            uint128 liquidity,
            uint256 feeGrowthInside0LastX128,
            uint256 feeGrowthInside1LastX128,
            uint128 tokensOwed0,
            uint128 tokensOwed1
        );

    struct MintParams {
        address token0;
        address token1;
        uint24 fee;
        int24 tickLower;
        int24 tickUpper;
        uint256 amount0Desired;
        uint256 amount1Desired;
        uint256 amount0Min;
        uint256 amount1Min;
        address recipient;
        uint256 deadline;
    }

    /// @notice Creates a new position wrapped in a NFT
    /// @dev Call this when the pool does exist and is initialized. Note that if the pool is created but not initialized
    /// a method does not exist, i.e. the pool is assumed to be initialized.
    /// @param params The params necessary to mint a position, encoded as `MintParams` in calldata
    /// @return tokenId The ID of the token that represents the minted position
    /// @return liquidity The amount of liquidity for this position
    /// @return amount0 The amount of token0
    /// @return amount1 The amount of token1
    function mint(MintParams calldata params)
        external
        payable
        returns (
            uint256 tokenId,
            uint128 liquidity,
            uint256 amount0,
            uint256 amount1
        );

    struct IncreaseLiquidityParams {
        uint256 tokenId;
        uint256 amount0Desired;
        uint256 amount1Desired;
        uint256 amount0Min;
        uint256 amount1Min;
        uint256 deadline;
    }

    /// @notice Increases the amount of liquidity in a position, with tokens paid by the `msg.sender`
    /// @param params tokenId The ID of the token for which liquidity is being increased,
    /// amount0Desired The desired amount of token0 to be spent,
    /// amount1Desired The desired amount of token1 to be spent,
    /// amount0Min The minimum amount of token0 to spend, which serves as a slippage check,
    /// amount1Min The minimum amount of token1 to spend, which serves as a slippage check,
    /// deadline The time by which the transaction must be included to effect the change
    /// @return liquidity The new liquidity amount as a result of the increase
    /// @return amount0 The amount of token0 to acheive resulting liquidity
    /// @return amount1 The amount of token1 to acheive resulting liquidity
    function increaseLiquidity(IncreaseLiquidityParams calldata params)
        external
        payable
        returns (
            uint128 liquidity,
            uint256 amount0,
            uint256 amount1
        );

    struct DecreaseLiquidityParams {
        uint256 tokenId;
        uint128 liquidity;
        uint256 amount0Min;
        uint256 amount1Min;
        uint256 deadline;
    }

    /// @notice Decreases the amount of liquidity in a position and accounts it to the position
    /// @param params tokenId The ID of the token for which liquidity is being decreased,
    /// amount The amount by which liquidity will be decreased,
    /// amount0Min The minimum amount of token0 that should be accounted for the burned liquidity,
    /// amount1Min The minimum amount of token1 that should be accounted for the burned liquidity,
    /// deadline The time by which the transaction must be included to effect the change
    /// @return amount0 The amount of token0 accounted to the position's tokens owed
    /// @return amount1 The amount of token1 accounted to the position's tokens owed
    function decreaseLiquidity(DecreaseLiquidityParams calldata params)
        external
        payable
        returns (uint256 amount0, uint256 amount1);

    struct CollectParams {
        uint256 tokenId;
        address recipient;
        uint128 amount0Max;
        uint128 amount1Max;
    }

    /// @notice Collects up to a maximum amount of fees owed to a specific position to the recipient
    /// @param params tokenId The ID of the NFT for which tokens are being collected,
    /// recipient The account that should receive the tokens,
    /// amount0Max The maximum amount of token0 to collect,
    /// amount1Max The maximum amount of token1 to collect
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(CollectParams calldata params) external payable returns (uint256 amount0, uint256 amount1);

    /// @notice Burns a token ID, which deletes it from the NFT contract. The token must have 0 liquidity and all tokens
    /// must be collected first.
    /// @param tokenId The ID of the token that is being burned
    function burn(uint256 tokenId) external payable;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.8.9;

/// @title Immutable state
/// @notice Functions that return immutable state of the router
interface IPeripheryImmutableState {
    /// @return Returns the address of the Uniswap V3 factory
    function factory() external view returns (address);

    /// @return Returns the address of WETH9
    function WETH9() external view returns (address);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import "./pool/IUniswapV3PoolActions.sol";
import "./pool/IUniswapV3PoolImmutables.sol";
import "./pool/IUniswapV3PoolState.sol";
import "./pool/IUniswapV3PoolDerivedState.sol";

/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
    IUniswapV3PoolImmutables,
    IUniswapV3PoolState,
    IUniswapV3PoolDerivedState,
    IUniswapV3PoolActions
{

}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
    /// @notice Sets the initial price for the pool
    /// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
    /// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
    function initialize(uint160 sqrtPriceX96) external;

    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Collects tokens owed to a position
    /// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
    /// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
    /// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
    /// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
    /// @param recipient The address which should receive the fees collected
    /// @param tickLower The lower tick of the position for which to collect fees
    /// @param tickUpper The upper tick of the position for which to collect fees
    /// @param amount0Requested How much token0 should be withdrawn from the fees owed
    /// @param amount1Requested How much token1 should be withdrawn from the fees owed
    /// @return amount0 The amount of fees collected in token0
    /// @return amount1 The amount of fees collected in token1
    function collect(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount0Requested,
        uint128 amount1Requested
    ) external returns (uint128 amount0, uint128 amount1);

    /// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
    /// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
    /// @dev Fees must be collected separately via a call to #collect
    /// @param tickLower The lower tick of the position for which to burn liquidity
    /// @param tickUpper The upper tick of the position for which to burn liquidity
    /// @param amount How much liquidity to burn
    /// @return amount0 The amount of token0 sent to the recipient
    /// @return amount1 The amount of token1 sent to the recipient
    function burn(
        int24 tickLower,
        int24 tickUpper,
        uint128 amount
    ) external returns (uint256 amount0, uint256 amount1);

    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
    /// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
    /// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
    /// with 0 amount{0,1} and sending the donation amount(s) from the callback
    /// @param recipient The address which will receive the token0 and token1 amounts
    /// @param amount0 The amount of token0 to send
    /// @param amount1 The amount of token1 to send
    /// @param data Any data to be passed through to the callback
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external;

    /// @notice Increase the maximum number of price and liquidity observations that this pool will store
    /// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
    /// the input observationCardinalityNext.
    /// @param observationCardinalityNext The desired minimum number of observations for the pool to store
    function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
    /// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
    /// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
    /// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
    /// you must call it with secondsAgos = [3600, 0].
    /// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
    /// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
    /// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
    /// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
    /// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
    /// timestamp
    function observe(uint32[] calldata secondsAgos)
        external
        view
        returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
    /// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
    /// @return The contract address
    function factory() external view returns (address);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);

    /// @notice The pool tick spacing
    /// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
    /// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
    /// This value is an int24 to avoid casting even though it is always positive.
    /// @return The tick spacing
    function tickSpacing() external view returns (int24);

    /// @notice The maximum amount of position liquidity that can use any tick in the range
    /// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
    /// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
    /// @return The max amount of liquidity per tick
    function maxLiquidityPerTick() external view returns (uint128);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.8.9;

/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
    /// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
    /// when accessed externally.
    /// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
    /// tick The current tick of the pool, i.e. according to the last tick transition that was run.
    /// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
    /// boundary.
    /// observationIndex The index of the last oracle observation that was written,
    /// observationCardinality The current maximum number of observations stored in the pool,
    /// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
    /// feeProtocol The protocol fee for both tokens of the pool.
    /// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
    /// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
    /// unlocked Whether the pool is currently locked to reentrancy
    function slot0()
        external
        view
        returns (
            uint160 sqrtPriceX96,
            int24 tick,
            uint16 observationIndex,
            uint16 observationCardinality,
            uint16 observationCardinalityNext,
            uint8 feeProtocol,
            bool unlocked
        );

    /// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal0X128() external view returns (uint256);

    /// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
    /// @dev This value can overflow the uint256
    function feeGrowthGlobal1X128() external view returns (uint256);

    /// @notice The amounts of token0 and token1 that are owed to the protocol
    /// @dev Protocol fees will never exceed uint128 max in either token
    function protocolPerformanceFees() external view returns (uint128 token0, uint128 token1);

    /// @notice The currently in range liquidity available to the pool
    /// @dev This value has no relationship to the total liquidity across all ticks
    function liquidity() external view returns (uint128);

    /// @notice Look up information about a specific tick in the pool
    /// @param tick The tick to look up
    /// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
    /// tick upper,
    /// liquidityNet how much liquidity changes when the pool price crosses the tick,
    /// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
    /// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
    /// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
    /// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
    /// secondsOutside the seconds spent on the other side of the tick from the current tick,
    /// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
    /// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
    /// In addition, these values are only relative and must be used only in comparison to previous snapshots for
    /// a specific position.
    function ticks(int24 tick)
        external
        view
        returns (
            uint128 liquidityGross,
            int128 liquidityNet,
            uint256 feeGrowthOutside0X128,
            uint256 feeGrowthOutside1X128,
            int56 tickCumulativeOutside,
            uint160 secondsPerLiquidityOutsideX128,
            uint32 secondsOutside,
            bool initialized
        );

    /// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
    function tickBitmap(int16 wordPosition) external view returns (uint256);

    /// @notice Returns the information about a position by the position's key
    /// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
    /// @return _liquidity The amount of liquidity in the position,
    /// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
    /// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
    /// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
    /// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
    function positions(bytes32 key)
        external
        view
        returns (
            uint128 _liquidity,
            uint256 feeGrowthInside0LastX128,
            uint256 feeGrowthInside1LastX128,
            uint128 tokensOwed0,
            uint128 tokensOwed1
        );

    /// @notice Returns data about a specific observation index
    /// @param index The element of the observations array to fetch
    /// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
    /// ago, rather than at a specific index in the array.
    /// @return blockTimestamp The timestamp of the observation,
    /// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
    /// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
    /// Returns initialized whether the observation has been initialized and the values are safe to use
    function observations(uint256 index)
        external
        view
        returns (
            uint32 blockTimestamp,
            int56 tickCumulative,
            uint160 secondsPerLiquidityCumulativeX128,
            bool initialized
        );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

interface IOracle {
    /// @notice Oracle price for tokens as a Q64.96 value.
    /// @notice Returns pricing information based on the indexes of non-zero bits in safetyIndicesSet.
    /// @notice It is possible that not all indices will have their respective prices returned.
    /// @dev The price is token1 / token0 i.e. how many weis of token1 required for 1 wei of token0.
    /// The safety indexes are:
    ///
    /// 1 - unsafe, this is typically a spot price that can be easily manipulated,
    ///
    /// 2 - 4 - more or less safe, this is typically a uniV3 oracle, where the safety is defined by the timespan of the average price
    ///
    /// 5 - safe - this is typically a chailink oracle
    /// @param token0 Reference to token0
    /// @param token1 Reference to token1
    /// @param safetyIndicesSet Bitmask of safety indices that are allowed for the return prices. For set of safety indexes = { 1 }, safetyIndicesSet = 0x2
    /// @return pricesX96 Prices that satisfy safetyIndex and tokens
    /// @return safetyIndices Safety indices for those prices
    function priceX96(
        address token0,
        address token1,
        uint256 safetyIndicesSet
    ) external view returns (uint256[] memory pricesX96, uint256[] memory safetyIndices);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "@openzeppelin/contracts/access/IAccessControlEnumerable.sol";

interface IDefaultAccessControl is IAccessControlEnumerable {
    /// @notice Checks that the address is contract admin.
    /// @param who Address to check
    /// @return `true` if who is admin, `false` otherwise
    function isAdmin(address who) external view returns (bool);

    /// @notice Checks that the address is contract admin.
    /// @param who Address to check
    /// @return `true` if who is operator, `false` otherwise
    function isOperator(address who) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "../../libraries/external/GPv2Order.sol";

interface ILStrategyHelper {
    function checkOrder(
        GPv2Order.Data memory order,
        bytes calldata uuid,
        address tokenIn,
        address tokenOut,
        uint256 amountIn,
        uint256 minAmountOut,
        uint256 deadline,
        address erc20Vault,
        uint256 fee
    ) external;

    function tickFromPriceX96(uint256 priceX96) external pure returns (int24);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "./IIntegrationVault.sol";

interface IERC20Vault is IIntegrationVault {
    /// @notice Initialized a new contract.
    /// @dev Can only be initialized by vault governance
    /// @param nft_ NFT of the vault in the VaultRegistry
    /// @param vaultTokens_ ERC20 tokens that will be managed by this Vault
    function initialize(uint256 nft_, address[] memory vaultTokens_) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "../external/erc/IERC1271.sol";
import "./IVault.sol";

interface IIntegrationVault is IVault, IERC1271 {
    /// @notice Pushes tokens on the vault balance to the underlying protocol. For example, for Yearn this operation will take USDC from
    /// the contract balance and convert it to yUSDC.
    /// @dev Tokens **must** be a subset of Vault Tokens. However, the convention is that if tokenAmount == 0 it is the same as token is missing.
    ///
    /// Also notice that this operation doesn't guarantee that tokenAmounts will be invested in full.
    /// @param tokens Tokens to push
    /// @param tokenAmounts Amounts of tokens to push
    /// @param options Additional options that could be needed for some vaults. E.g. for Uniswap this could be `deadline` param. For the exact bytes structure see concrete vault descriptions
    /// @return actualTokenAmounts The amounts actually invested. It could be less than tokenAmounts (but not higher)
    function push(
        address[] memory tokens,
        uint256[] memory tokenAmounts,
        bytes memory options
    ) external returns (uint256[] memory actualTokenAmounts);

    /// @notice The same as `push` method above but transfers tokens to vault balance prior to calling push.
    /// After the `push` it returns all the leftover tokens back (`push` method doesn't guarantee that tokenAmounts will be invested in full).
    /// @param tokens Tokens to push
    /// @param tokenAmounts Amounts of tokens to push
    /// @param options Additional options that could be needed for some vaults. E.g. for Uniswap this could be `deadline` param. For the exact bytes structure see concrete vault descriptions
    /// @return actualTokenAmounts The amounts actually invested. It could be less than tokenAmounts (but not higher)
    function transferAndPush(
        address from,
        address[] memory tokens,
        uint256[] memory tokenAmounts,
        bytes memory options
    ) external returns (uint256[] memory actualTokenAmounts);

    /// @notice Pulls tokens from the underlying protocol to the `to` address.
    /// @dev Can only be called but Vault Owner or Strategy. Vault owner is the owner of NFT for this vault in VaultManager.
    /// Strategy is approved address for the vault NFT.
    /// When called by vault owner this method just pulls the tokens from the protocol to the `to` address
    /// When called by strategy on vault other than zero vault it pulls the tokens to zero vault (required `to` == zero vault)
    /// When called by strategy on zero vault it pulls the tokens to zero vault, pushes tokens on the `to` vault, and reclaims everything that's left.
    /// Thus any vault other than zero vault cannot have any tokens on it
    ///
    /// Tokens **must** be a subset of Vault Tokens. However, the convention is that if tokenAmount == 0 it is the same as token is missing.
    ///
    /// Pull is fulfilled on the best effort basis, i.e. if the tokenAmounts overflows available funds it withdraws all the funds.
    /// @param to Address to receive the tokens
    /// @param tokens Tokens to pull
    /// @param tokenAmounts Amounts of tokens to pull
    /// @param options Additional options that could be needed for some vaults. E.g. for Uniswap this could be `deadline` param. For the exact bytes structure see concrete vault descriptions
    /// @return actualTokenAmounts The amounts actually withdrawn. It could be less than tokenAmounts (but not higher)
    function pull(
        address to,
        address[] memory tokens,
        uint256[] memory tokenAmounts,
        bytes memory options
    ) external returns (uint256[] memory actualTokenAmounts);

    /// @notice Claim ERC20 tokens from vault balance to zero vault.
    /// @dev Cannot be called from zero vault.
    /// @param tokens Tokens to claim
    /// @return actualTokenAmounts Amounts reclaimed
    function reclaimTokens(address[] memory tokens) external returns (uint256[] memory actualTokenAmounts);

    /// @notice Execute one of whitelisted calls.
    /// @dev Can only be called by Vault Owner or Strategy. Vault owner is the owner of NFT for this vault in VaultManager.
    /// Strategy is approved address for the vault NFT.
    ///
    /// Since this method allows sending arbitrary transactions, the destinations of the calls
    /// are whitelisted by Protocol Governance.
    /// @param to Address of the reward pool
    /// @param selector Selector of the call
    /// @param data Abi encoded parameters to `to::selector`
    /// @return result Result of execution of the call
    function externalCall(
        address to,
        bytes4 selector,
        bytes memory data
    ) external payable returns (bytes memory result);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.8.9;

import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "./IIntegrationVault.sol";
import "../external/univ3/INonfungiblePositionManager.sol";
import "../external/univ3/IUniswapV3Pool.sol";

interface IUniV3Vault is IERC721Receiver, IIntegrationVault {
    struct Options {
        uint256 amount0Min;
        uint256 amount1Min;
        uint256 deadline;
    }

    /// @notice Reference to INonfungiblePositionManager of UniswapV3 protocol.
    function positionManager() external view returns (INonfungiblePositionManager);

    /// @notice Reference to UniswapV3 pool.
    function pool() external view returns (IUniswapV3Pool);

    /// @notice NFT of UniV3 position manager
    function uniV3Nft() external view returns (uint256);

    /// @notice Returns tokenAmounts corresponding to liquidity, based on the current Uniswap position
    /// @param liquidity Liquidity that will be converted to token amounts
    /// @return tokenAmounts Token amounts for the specified liquidity
    function liquidityToTokenAmounts(uint128 liquidity) external view returns (uint256[] memory tokenAmounts);

    /// @notice Returns liquidity corresponding to token amounts, based on the current Uniswap position
    /// @param tokenAmounts Token amounts that will be converted to liquidity
    /// @return liquidity Liquidity for the specified token amounts
    function tokenAmountsToLiquidity(uint256[] memory tokenAmounts) external view returns (uint128 liquidity);

    /// @notice Initialized a new contract.
    /// @dev Can only be initialized by vault governance
    /// @param nft_ NFT of the vault in the VaultRegistry
    /// @param vaultTokens_ ERC20 tokens that will be managed by this Vault
    /// @param fee_ Fee of the UniV3 pool
    /// @param uniV3Helper_ address of helper for UniV3 arithmetic with ticks
    function initialize(
        uint256 nft_,
        address[] memory vaultTokens_,
        uint24 fee_,
        address uniV3Helper_
    ) external;

    /// @notice Collect UniV3 fees to zero vault.
    function collectEarnings() external returns (uint256[] memory collectedEarnings);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "./IVaultGovernance.sol";

interface IVault is IERC165 {
    /// @notice Checks if the vault is initialized

    function initialized() external view returns (bool);

    /// @notice VaultRegistry NFT for this vault
    function nft() external view returns (uint256);

    /// @notice Address of the Vault Governance for this contract.
    function vaultGovernance() external view returns (IVaultGovernance);

    /// @notice ERC20 tokens under Vault management.
    function vaultTokens() external view returns (address[] memory);

    /// @notice Checks if a token is vault token
    /// @param token Address of the token to check
    /// @return `true` if this token is managed by Vault
    function isVaultToken(address token) external view returns (bool);

    /// @notice Total value locked for this contract.
    /// @dev Generally it is the underlying token value of this contract in some
    /// other DeFi protocol. For example, for USDC Yearn Vault this would be total USDC balance that could be withdrawn for Yearn to this contract.
    /// The tvl itself is estimated in some range. Sometimes the range is exact, sometimes it's not
    /// @return minTokenAmounts Lower bound for total available balances estimation (nth tokenAmount corresponds to nth token in vaultTokens)
    /// @return maxTokenAmounts Upper bound for total available balances estimation (nth tokenAmount corresponds to nth token in vaultTokens)
    function tvl() external view returns (uint256[] memory minTokenAmounts, uint256[] memory maxTokenAmounts);

    /// @notice Existential amounts for each token
    function pullExistentials() external view returns (uint256[] memory);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "../IProtocolGovernance.sol";
import "../IVaultRegistry.sol";
import "./IVault.sol";

interface IVaultGovernance {
    /// @notice Internal references of the contract.
    /// @param protocolGovernance Reference to Protocol Governance
    /// @param registry Reference to Vault Registry
    struct InternalParams {
        IProtocolGovernance protocolGovernance;
        IVaultRegistry registry;
        IVault singleton;
    }

    // -------------------  EXTERNAL, VIEW  -------------------

    /// @notice Timestamp in unix time seconds after which staged Delayed Strategy Params could be committed.
    /// @param nft Nft of the vault
    function delayedStrategyParamsTimestamp(uint256 nft) external view returns (uint256);

    /// @notice Timestamp in unix time seconds after which staged Delayed Protocol Params could be committed.
    function delayedProtocolParamsTimestamp() external view returns (uint256);

    /// @notice Timestamp in unix time seconds after which staged Delayed Protocol Params Per Vault could be committed.
    /// @param nft Nft of the vault
    function delayedProtocolPerVaultParamsTimestamp(uint256 nft) external view returns (uint256);

    /// @notice Timestamp in unix time seconds after which staged Internal Params could be committed.
    function internalParamsTimestamp() external view returns (uint256);

    /// @notice Internal Params of the contract.
    function internalParams() external view returns (InternalParams memory);

    /// @notice Staged new Internal Params.
    /// @dev The Internal Params could be committed after internalParamsTimestamp
    function stagedInternalParams() external view returns (InternalParams memory);

    // -------------------  EXTERNAL, MUTATING  -------------------

    /// @notice Stage new Internal Params.
    /// @param newParams New Internal Params
    function stageInternalParams(InternalParams memory newParams) external;

    /// @notice Commit staged Internal Params.
    function commitInternalParams() external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

import "./ExceptionsLibrary.sol";

/// @notice CommonLibrary shared utilities
library CommonLibrary {
    uint256 constant DENOMINATOR = 10**9;
    uint256 constant D18 = 10**18;
    uint256 constant YEAR = 365 * 24 * 3600;
    uint256 constant Q128 = 2**128;
    uint256 constant Q96 = 2**96;
    uint256 constant Q48 = 2**48;
    uint256 constant Q160 = 2**160;
    uint256 constant UNI_FEE_DENOMINATOR = 10**6;

    /// @notice Sort uint256 using bubble sort. The sorting is done in-place.
    /// @param arr Array of uint256
    function sortUint(uint256[] memory arr) internal pure {
        uint256 l = arr.length;
        for (uint256 i = 0; i < l; ++i) {
            for (uint256 j = i + 1; j < l; ++j) {
                if (arr[i] > arr[j]) {
                    uint256 temp = arr[i];
                    arr[i] = arr[j];
                    arr[j] = temp;
                }
            }
        }
    }

    /// @notice Checks if array of addresses is sorted and all adresses are unique
    /// @param tokens A set of addresses to check
    /// @return `true` if all addresses are sorted and unique, `false` otherwise
    function isSortedAndUnique(address[] memory tokens) internal pure returns (bool) {
        if (tokens.length < 2) {
            return true;
        }
        for (uint256 i = 0; i < tokens.length - 1; ++i) {
            if (tokens[i] >= tokens[i + 1]) {
                return false;
            }
        }
        return true;
    }

    /// @notice Projects tokenAmounts onto subset or superset of tokens
    /// @dev
    /// Requires both sets of tokens to be sorted. When tokens are not sorted, it's undefined behavior.
    /// If there is a token in tokensToProject that is not part of tokens and corresponding tokenAmountsToProject > 0, reverts.
    /// Zero token amount is eqiuvalent to missing token
    function projectTokenAmounts(
        address[] memory tokens,
        address[] memory tokensToProject,
        uint256[] memory tokenAmountsToProject
    ) internal pure returns (uint256[] memory) {
        uint256[] memory res = new uint256[](tokens.length);
        uint256 t = 0;
        uint256 tp = 0;
        while ((t < tokens.length) && (tp < tokensToProject.length)) {
            if (tokens[t] < tokensToProject[tp]) {
                res[t] = 0;
                t++;
            } else if (tokens[t] > tokensToProject[tp]) {
                if (tokenAmountsToProject[tp] == 0) {
                    tp++;
                } else {
                    revert("TPS");
                }
            } else {
                res[t] = tokenAmountsToProject[tp];
                t++;
                tp++;
            }
        }
        while (t < tokens.length) {
            res[t] = 0;
            t++;
        }
        return res;
    }

    /// @notice Calculated sqrt of uint in X96 format
    /// @param xX96 input number in X96 format
    /// @return sqrt of xX96 in X96 format
    function sqrtX96(uint256 xX96) internal pure returns (uint256) {
        uint256 sqX96 = sqrt(xX96);
        return sqX96 << 48;
    }

    /// @notice Calculated sqrt of uint
    /// @param x input number
    /// @return sqrt of x
    function sqrt(uint256 x) internal pure returns (uint256) {
        if (x == 0) return 0;
        uint256 xx = x;
        uint256 r = 1;
        if (xx >= 0x100000000000000000000000000000000) {
            xx >>= 128;
            r <<= 64;
        }
        if (xx >= 0x10000000000000000) {
            xx >>= 64;
            r <<= 32;
        }
        if (xx >= 0x100000000) {
            xx >>= 32;
            r <<= 16;
        }
        if (xx >= 0x10000) {
            xx >>= 16;
            r <<= 8;
        }
        if (xx >= 0x100) {
            xx >>= 8;
            r <<= 4;
        }
        if (xx >= 0x10) {
            xx >>= 4;
            r <<= 2;
        }
        if (xx >= 0x4) {
            r <<= 1;
        }
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        uint256 r1 = x / r;
        return (r < r1 ? r : r1);
    }

    /// @notice Recovers signer address from signed message hash
    /// @param _ethSignedMessageHash signed message
    /// @param _signature contatenated ECDSA r, s, v (65 bytes)
    /// @return Recovered address if the signature is valid, address(0) otherwise
    function recoverSigner(bytes32 _ethSignedMessageHash, bytes memory _signature) internal pure returns (address) {
        (bytes32 r, bytes32 s, uint8 v) = splitSignature(_signature);

        return ecrecover(_ethSignedMessageHash, v, r, s);
    }

    /// @notice Get ECDSA r, s, v from signature
    /// @param sig signature (65 bytes)
    /// @return r ECDSA r
    /// @return s ECDSA s
    /// @return v ECDSA v
    function splitSignature(bytes memory sig)
        internal
        pure
        returns (
            bytes32 r,
            bytes32 s,
            uint8 v
        )
    {
        require(sig.length == 65, ExceptionsLibrary.INVALID_LENGTH);

        assembly {
            r := mload(add(sig, 32))
            s := mload(add(sig, 64))
            v := byte(0, mload(add(sig, 96)))
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;

/// @notice Exceptions stores project`s smart-contracts exceptions
library ExceptionsLibrary {
    string constant ADDRESS_ZERO = "AZ";
    string constant VALUE_ZERO = "VZ";
    string constant EMPTY_LIST = "EMPL";
    string constant NOT_FOUND = "NF";
    string constant INIT = "INIT";
    string constant DUPLICATE = "DUP";
    string constant NULL = "NULL";
    string constant TIMESTAMP = "TS";
    string constant FORBIDDEN = "FRB";
    string constant ALLOWLIST = "ALL";
    string constant LIMIT_OVERFLOW = "LIMO";
    string constant LIMIT_UNDERFLOW = "LIMU";
    string constant INVALID_VALUE = "INV";
    string constant INVARIANT = "INVA";
    string constant INVALID_TARGET = "INVTR";
    string constant INVALID_TOKEN = "INVTO";
    string constant INVALID_INTERFACE = "INVI";
    string constant INVALID_SELECTOR = "INVS";
    string constant INVALID_STATE = "INVST";
    string constant INVALID_LENGTH = "INVL";
    string constant LOCK = "LCKD";
    string constant DISABLED = "DIS";
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.9;

/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        // diff: original lib works under 0.7.6 with overflows enabled
        unchecked {
            // 512-bit multiply [prod1 prod0] = a * b
            // Compute the product mod 2**256 and mod 2**256 - 1
            // then use the Chinese Remainder Theorem to reconstruct
            // the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2**256 + prod0
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(a, b, not(0))
                prod0 := mul(a, b)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division
            if (prod1 == 0) {
                require(denominator > 0);
                assembly {
                    result := div(prod0, denominator)
                }
                return result;
            }

            // Make sure the result is less than 2**256.
            // Also prevents denominator == 0
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0]
            // Compute remainder using mulmod
            uint256 remainder;
            assembly {
                remainder := mulmod(a, b, denominator)
            }
            // Subtract 256 bit number from 512 bit number
            assembly {
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator
            // Compute largest power of two divisor of denominator.
            // Always >= 1.
            // diff: original uint256 twos = -denominator & denominator;
            uint256 twos = uint256(-int256(denominator)) & denominator;
            // Divide denominator by power of two
            assembly {
                denominator := div(denominator, twos)
            }

            // Divide [prod1 prod0] by the factors of two
            assembly {
                prod0 := div(prod0, twos)
            }
            // Shift in bits from prod1 into prod0. For this we need
            // to flip `twos` such that it is 2**256 / twos.
            // If twos is zero, then it becomes one
            assembly {
                twos := add(div(sub(0, twos), twos), 1)
            }
            prod0 |= prod1 * twos;

            // Invert denominator mod 2**256
            // Now that denominator is an odd number, it has an inverse
            // modulo 2**256 such that denominator * inv = 1 mod 2**256.
            // Compute the inverse by starting with a seed that is correct
            // correct for four bits. That is, denominator * inv = 1 mod 2**4
            uint256 inv = (3 * denominator) ^ 2;
            // Now use Newton-Raphson iteration to improve the precision.
            // Thanks to Hensel's lifting lemma, this also works in modular
            // arithmetic, doubling the correct bits in each step.
            inv *= 2 - denominator * inv; // inverse mod 2**8
            inv *= 2 - denominator * inv; // inverse mod 2**16
            inv *= 2 - denominator * inv; // inverse mod 2**32
            inv *= 2 - denominator * inv; // inverse mod 2**64
            inv *= 2 - denominator * inv; // inverse mod 2**128
            inv *= 2 - denominator * inv; // inverse mod 2**256

            // Because the division is now exact we can divide by multiplying
            // with the modular inverse of denominator. This will give us the
            // correct result modulo 2**256. Since the precoditions guarantee
            // that the outcome is less than 2**256, this is the final result.
            // We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inv;
            return result;
        }
    }

    /// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    function mulDivRoundingUp(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        // diff: original lib works under 0.7.6 with overflows enabled
        unchecked {
            result = mulDiv(a, b, denominator);
            if (mulmod(a, b, denominator) > 0) {
                require(result < type(uint256).max);
                result++;
            }
        }
    }
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity 0.8.9;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/// @title Gnosis Protocol v2 Order Library
/// @author Gnosis Developers
library GPv2Order {
    /// @dev The complete data for a Gnosis Protocol order. This struct contains
    /// all order parameters that are signed for submitting to GP.
    struct Data {
        IERC20 sellToken;
        IERC20 buyToken;
        address receiver;
        uint256 sellAmount;
        uint256 buyAmount;
        uint32 validTo;
        bytes32 appData;
        uint256 feeAmount;
        bytes32 kind;
        bool partiallyFillable;
        bytes32 sellTokenBalance;
        bytes32 buyTokenBalance;
    }

    /// @dev The order EIP-712 type hash for the [`GPv2Order.Data`] struct.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256(
    ///     "Order(" +
    ///         "address sellToken," +
    ///         "address buyToken," +
    ///         "address receiver," +
    ///         "uint256 sellAmount," +
    ///         "uint256 buyAmount," +
    ///         "uint32 validTo," +
    ///         "bytes32 appData," +
    ///         "uint256 feeAmount," +
    ///         "string kind," +
    ///         "bool partiallyFillable" +
    ///         "string sellTokenBalance" +
    ///         "string buyTokenBalance" +
    ///     ")"
    /// )
    /// ```
    bytes32 internal constant TYPE_HASH = hex"d5a25ba2e97094ad7d83dc28a6572da797d6b3e7fc6663bd93efb789fc17e489";

    /// @dev The marker value for a sell order for computing the order struct
    /// hash. This allows the EIP-712 compatible wallets to display a
    /// descriptive string for the order kind (instead of 0 or 1).
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("sell")
    /// ```
    bytes32 internal constant KIND_SELL = hex"f3b277728b3fee749481eb3e0b3b48980dbbab78658fc419025cb16eee346775";

    /// @dev The OrderKind marker value for a buy order for computing the order
    /// struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("buy")
    /// ```
    bytes32 internal constant KIND_BUY = hex"6ed88e868af0a1983e3886d5f3e95a2fafbd6c3450bc229e27342283dc429ccc";

    /// @dev The TokenBalance marker value for using direct ERC20 balances for
    /// computing the order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("erc20")
    /// ```
    bytes32 internal constant BALANCE_ERC20 = hex"5a28e9363bb942b639270062aa6bb295f434bcdfc42c97267bf003f272060dc9";

    /// @dev The TokenBalance marker value for using Balancer Vault external
    /// balances (in order to re-use Vault ERC20 approvals) for computing the
    /// order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("external")
    /// ```
    bytes32 internal constant BALANCE_EXTERNAL = hex"abee3b73373acd583a130924aad6dc38cfdc44ba0555ba94ce2ff63980ea0632";

    /// @dev The TokenBalance marker value for using Balancer Vault internal
    /// balances for computing the order struct hash.
    ///
    /// This value is pre-computed from the following expression:
    /// ```
    /// keccak256("internal")
    /// ```
    bytes32 internal constant BALANCE_INTERNAL = hex"4ac99ace14ee0a5ef932dc609df0943ab7ac16b7583634612f8dc35a4289a6ce";

    /// @dev Marker address used to indicate that the receiver of the trade
    /// proceeds should the owner of the order.
    ///
    /// This is chosen to be `address(0)` for gas efficiency as it is expected
    /// to be the most common case.
    address internal constant RECEIVER_SAME_AS_OWNER = address(0);

    /// @dev The byte length of an order unique identifier.
    uint256 internal constant UID_LENGTH = 56;

    /// @dev Returns the actual receiver for an order. This function checks
    /// whether or not the [`receiver`] field uses the marker value to indicate
    /// it is the same as the order owner.
    ///
    /// @return receiver The actual receiver of trade proceeds.
    function actualReceiver(Data memory order, address owner) internal pure returns (address receiver) {
        if (order.receiver == RECEIVER_SAME_AS_OWNER) {
            receiver = owner;
        } else {
            receiver = order.receiver;
        }
    }

    /// @dev Return the EIP-712 signing hash for the specified order.
    ///
    /// @param order The order to compute the EIP-712 signing hash for.
    /// @param domainSeparator The EIP-712 domain separator to use.
    /// @return orderDigest The 32 byte EIP-712 struct hash.
    function hash(Data memory order, bytes32 domainSeparator) internal pure returns (bytes32 orderDigest) {
        bytes32 structHash;

        // NOTE: Compute the EIP-712 order struct hash in place. As suggested
        // in the EIP proposal, noting that the order struct has 10 fields, and
        // including the type hash `(12 + 1) * 32 = 416` bytes to hash.
        // <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#rationale-for-encodedata>
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let dataStart := sub(order, 32)
            let temp := mload(dataStart)
            mstore(dataStart, TYPE_HASH)
            structHash := keccak256(dataStart, 416)
            mstore(dataStart, temp)
        }

        // NOTE: Now that we have the struct hash, compute the EIP-712 signing
        // hash using scratch memory past the free memory pointer. The signing
        // hash is computed from `"\x19\x01" || domainSeparator || structHash`.
        // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory>
        // <https://github.com/ethereum/EIPs/blob/master/EIPS/eip-712.md#specification>
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let freeMemoryPointer := mload(0x40)
            mstore(freeMemoryPointer, "\x19\x01")
            mstore(add(freeMemoryPointer, 2), domainSeparator)
            mstore(add(freeMemoryPointer, 34), structHash)
            orderDigest := keccak256(freeMemoryPointer, 66)
        }
    }

    /// @dev Packs order UID parameters into the specified memory location. The
    /// result is equivalent to `abi.encodePacked(...)` with the difference that
    /// it allows re-using the memory for packing the order UID.
    ///
    /// This function reverts if the order UID buffer is not the correct size.
    ///
    /// @param orderUid The buffer pack the order UID parameters into.
    /// @param orderDigest The EIP-712 struct digest derived from the order
    /// parameters.
    /// @param owner The address of the user who owns this order.
    /// @param validTo The epoch time at which the order will stop being valid.
    function packOrderUidParams(
        bytes memory orderUid,
        bytes32 orderDigest,
        address owner,
        uint32 validTo
    ) internal pure {
        require(orderUid.length == UID_LENGTH, "GPv2: uid buffer overflow");

        // NOTE: Write the order UID to the allocated memory buffer. The order
        // parameters are written to memory in **reverse order** as memory
        // operations write 32-bytes at a time and we want to use a packed
        // encoding. This means, for example, that after writing the value of
        // `owner` to bytes `20:52`, writing the `orderDigest` to bytes `0:32`
        // will **overwrite** bytes `20:32`. This is desirable as addresses are
        // only 20 bytes and `20:32` should be `0`s:
        //
        //        |           1111111111222222222233333333334444444444555555
        //   byte | 01234567890123456789012345678901234567890123456789012345
        // -------+---------------------------------------------------------
        //  field | [.........orderDigest..........][......owner.......][vT]
        // -------+---------------------------------------------------------
        // mstore |                         [000000000000000000000000000.vT]
        //        |                     [00000000000.......owner.......]
        //        | [.........orderDigest..........]
        //
        // Additionally, since Solidity `bytes memory` are length prefixed,
        // 32 needs to be added to all the offsets.
        //
        // solhint-disable-next-line no-inline-assembly
        assembly {
            mstore(add(orderUid, 56), validTo)
            mstore(add(orderUid, 52), owner)
            mstore(add(orderUid, 32), orderDigest)
        }
    }

    /// @dev Extracts specific order information from the standardized unique
    /// order id of the protocol.
    ///
    /// @param orderUid The unique identifier used to represent an order in
    /// the protocol. This uid is the packed concatenation of the order digest,
    /// the validTo order parameter and the address of the user who created the
    /// order. It is used by the user to interface with the contract directly,
    /// and not by calls that are triggered by the solvers.
    /// @return orderDigest The EIP-712 signing digest derived from the order
    /// parameters.
    /// @return owner The address of the user who owns this order.
    /// @return validTo The epoch time at which the order will stop being valid.
    function extractOrderUidParams(bytes calldata orderUid)
        internal
        pure
        returns (
            bytes32 orderDigest,
            address owner,
            uint32 validTo
        )
    {
        require(orderUid.length == UID_LENGTH, "GPv2: invalid uid");

        // Use assembly to efficiently decode packed calldata.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            orderDigest := calldataload(orderUid.offset)
            owner := shr(96, calldataload(add(orderUid.offset, 32)))
            validTo := shr(224, calldataload(add(orderUid.offset, 52)))
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.8.9;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../interfaces/external/univ3/INonfungiblePositionManager.sol";
import "../interfaces/vaults/IERC20Vault.sol";
import "../interfaces/vaults/IUniV3Vault.sol";
import "../interfaces/oracles/IOracle.sol";
import "../interfaces/utils/ILStrategyHelper.sol";
import "../libraries/ExceptionsLibrary.sol";
import "../libraries/CommonLibrary.sol";
import "../libraries/external/FullMath.sol";
import "../libraries/external/GPv2Order.sol";
import "../utils/DefaultAccessControl.sol";

contract LStrategy is DefaultAccessControl {
    using SafeERC20 for IERC20;

    // IMMUTABLES
    uint256 public constant DENOMINATOR = 10**9;
    bytes4 public constant SET_PRESIGNATURE_SELECTOR = 0xec6cb13f;
    bytes4 public constant APPROVE_SELECTOR = 0x095ea7b3;
    address[] public tokens;
    IERC20Vault public immutable erc20Vault;
    INonfungiblePositionManager public immutable positionManager;
    ILStrategyHelper public immutable orderHelper;
    uint24 public immutable poolFee;
    address public immutable cowswapSettlement;
    address public immutable cowswapVaultRelayer;
    uint16 public immutable intervalWidthInTicks;

    // INTERNAL STATE

    IUniV3Vault public lowerVault;
    IUniV3Vault public upperVault;
    uint256 public lastRebalanceERC20UniV3VaultsTimestamp;
    uint256 public lastRebalanceUniV3VaultsTimestamp;
    uint256 public orderDeadline;
    uint256[] internal _pullExistentials;

    // MUTABLE PARAMS

    struct TradingParams {
        IOracle oracle;
        uint32 maxSlippageD;
        uint32 orderDeadline;
        uint256 oracleSafetyMask;
        uint256 maxFee0;
        uint256 maxFee1;
    }

    struct RatioParams {
        uint32 erc20UniV3CapitalRatioD;
        uint32 erc20TokenRatioD;
        uint32 minErc20UniV3CapitalRatioDeviationD;
        uint32 minErc20TokenRatioDeviationD;
        uint32 minUniV3LiquidityRatioDeviationD;
    }

    struct OtherParams {
        uint256 minToken0ForOpening;
        uint256 minToken1ForOpening;
        uint256 secondsBetweenRebalances;
    }

    struct PreOrder {
        address tokenIn;
        address tokenOut;
        uint64 deadline;
        uint256 amountIn;
        uint256 minAmountOut;
    }

    struct LiquidityParams {
        uint128 targetUniV3LiquidityRatioD;
        bool isNegativeLiquidityRatio;
    }

    TradingParams public tradingParams;
    RatioParams public ratioParams;
    OtherParams public otherParams;
    PreOrder public preOrder;

    // @notice Constructor for a new contract
    // @param positionManager_ Reference to UniswapV3 positionManager
    // @param erc20vault_ Reference to ERC20 Vault
    // @param vault1_ Reference to Uniswap V3 Vault 1
    // @param vault2_ Reference to Uniswap V3 Vault 2
    constructor(
        INonfungiblePositionManager positionManager_,
        address cowswapSettlement_,
        address cowswapVaultRelayer_,
        IERC20Vault erc20vault_,
        IUniV3Vault vault1_,
        IUniV3Vault vault2_,
        ILStrategyHelper orderHelper_,
        address admin_,
        uint16 intervalWidthInTicks_
    ) DefaultAccessControl(admin_) {
        require(
            (address(positionManager_) != address(0)) &&
                (address(orderHelper_) != address(0)) &&
                (address(vault1_) != address(0)) &&
                (address(vault2_) != address(0)) &&
                (address(erc20vault_) != address(0)) &&
                (cowswapVaultRelayer_ != address(0)) &&
                (cowswapSettlement_ != address(0)),
            ExceptionsLibrary.ADDRESS_ZERO
        );

        require(intervalWidthInTicks_ > 0, ExceptionsLibrary.VALUE_ZERO);

        positionManager = positionManager_;
        erc20Vault = erc20vault_;
        lowerVault = vault1_;
        upperVault = vault2_;
        tokens = vault1_.vaultTokens();
        poolFee = vault1_.pool().fee();
        _pullExistentials = vault1_.pullExistentials();
        cowswapSettlement = cowswapSettlement_;
        cowswapVaultRelayer = cowswapVaultRelayer_;
        orderHelper = orderHelper_;
        intervalWidthInTicks = intervalWidthInTicks_;
    }

    // -------------------  EXTERNAL, VIEW  -------------------

    /// @notice Target price based on mutable params, as a Q64.96 value
    function getTargetPriceX96(
        address token0,
        address token1,
        TradingParams memory tradingParams_
    ) public view returns (uint256 priceX96) {
        (uint256[] memory pricesX96, ) = tradingParams_.oracle.priceX96(
            token0,
            token1,
            tradingParams_.oracleSafetyMask
        );
        require(pricesX96.length > 0, ExceptionsLibrary.INVALID_LENGTH);
        for (uint256 i = 0; i < pricesX96.length; i++) {
            priceX96 += pricesX96[i];
        }
        priceX96 /= pricesX96.length;
    }

    /// @notice Target liquidity ratio for UniV3 vaults
    function targetUniV3LiquidityRatio(int24 targetTick_)
        public
        view
        returns (uint128 liquidityRatioD, bool isNegative)
    {
        (int24 tickLower, int24 tickUpper, ) = _getVaultStats(lowerVault);
        int24 midTick = (tickUpper + tickLower) / 2;
        isNegative = midTick > targetTick_;
        if (isNegative) {
            liquidityRatioD = uint128(uint24(midTick - targetTick_));
        } else {
            liquidityRatioD = uint128(uint24(targetTick_ - midTick));
        }
        liquidityRatioD = uint128(liquidityRatioD * DENOMINATOR) / uint128(uint24(tickUpper - tickLower) / 2);
    }

    // -------------------  EXTERNAL, MUTATING  -------------------

    /// @notice Make a rebalance between ERC20 and UniV3 Vaults
    /// @param minLowerVaultTokens Min accepted tokenAmounts for lower vault
    /// @param minUpperVaultTokens Min accepted tokenAmounts for upper vault
    /// @param deadline Timestamp after which the transaction reverts
    /// @return totalPulledAmounts total amounts pulled from erc20 vault or Uni vaults
    /// @return isNegativeCapitalDelta `true` if rebalance if from UniVaults, false otherwise
    /// @return percentageIncreaseD the percentage of capital change of UniV3 vaults
    function rebalanceERC20UniV3Vaults(
        uint256[] memory minLowerVaultTokens,
        uint256[] memory minUpperVaultTokens,
        uint256 deadline
    )
        public
        returns (
            uint256[] memory totalPulledAmounts,
            bool isNegativeCapitalDelta,
            uint256 percentageIncreaseD
        )
    {
        _requireAtLeastOperator();
        require(
            block.timestamp >= lastRebalanceERC20UniV3VaultsTimestamp + otherParams.secondsBetweenRebalances,
            ExceptionsLibrary.TIMESTAMP
        );
        lastRebalanceERC20UniV3VaultsTimestamp = block.timestamp;
        uint256[] memory lowerTokenAmounts;
        uint256[] memory upperTokenAmounts;
        uint128 lowerVaultLiquidity;
        uint128 upperVaultLiquidity;

        totalPulledAmounts = new uint256[](2);

        {
            uint256 priceX96 = getTargetPriceX96(tokens[0], tokens[1], tradingParams);
            uint256 sumUniV3Capital = _getCapital(priceX96, lowerVault) + _getCapital(priceX96, upperVault);

            if (sumUniV3Capital == 0) {
                bytes memory options = _makeUniswapVaultOptions(new uint256[](2), deadline);

                erc20Vault.pull(address(lowerVault), tokens, _pullExistentials, options);

                erc20Vault.pull(address(upperVault), tokens, _pullExistentials, options);

                sumUniV3Capital = _getCapital(priceX96, lowerVault) + _getCapital(priceX96, upperVault);
            }

            uint256 erc20VaultCapital = _getCapital(priceX96, erc20Vault);
            uint256 capitalDelta;

            (capitalDelta, isNegativeCapitalDelta) = _liquidityDelta(
                erc20VaultCapital,
                sumUniV3Capital,
                ratioParams.erc20UniV3CapitalRatioD,
                ratioParams.minErc20UniV3CapitalRatioDeviationD
            );
            if (capitalDelta == 0) {
                return (new uint256[](2), false, 0);
            }

            percentageIncreaseD = FullMath.mulDiv(DENOMINATOR, capitalDelta, sumUniV3Capital);
            (, , lowerVaultLiquidity) = _getVaultStats(lowerVault);
            (, , upperVaultLiquidity) = _getVaultStats(upperVault);
            lowerTokenAmounts = lowerVault.liquidityToTokenAmounts(
                uint128(FullMath.mulDiv(percentageIncreaseD, lowerVaultLiquidity, DENOMINATOR))
            );
            upperTokenAmounts = upperVault.liquidityToTokenAmounts(
                uint128(FullMath.mulDiv(percentageIncreaseD, upperVaultLiquidity, DENOMINATOR))
            );
        }

        if (!isNegativeCapitalDelta) {
            if (lowerVaultLiquidity > 0) {
                totalPulledAmounts = erc20Vault.pull(
                    address(lowerVault),
                    tokens,
                    lowerTokenAmounts,
                    _makeUniswapVaultOptions(minLowerVaultTokens, deadline)
                );
            }
            if (upperVaultLiquidity > 0) {
                uint256[] memory pulledAmounts = erc20Vault.pull(
                    address(upperVault),
                    tokens,
                    upperTokenAmounts,
                    _makeUniswapVaultOptions(minUpperVaultTokens, deadline)
                );
                for (uint256 i = 0; i < 2; i++) {
                    totalPulledAmounts[i] += pulledAmounts[i];
                }
            }
        } else {
            totalPulledAmounts = lowerVault.pull(
                address(erc20Vault),
                tokens,
                lowerTokenAmounts,
                _makeUniswapVaultOptions(minLowerVaultTokens, deadline)
            );
            uint256[] memory pulledAmounts = upperVault.pull(
                address(erc20Vault),
                tokens,
                upperTokenAmounts,
                _makeUniswapVaultOptions(minUpperVaultTokens, deadline)
            );
            for (uint256 i = 0; i < 2; i++) {
                totalPulledAmounts[i] += pulledAmounts[i];
            }
        }
        emit RebalancedErc20UniV3(tx.origin, msg.sender, !isNegativeCapitalDelta, totalPulledAmounts);
    }

    /// @notice Make a rebalance of UniV3 vaults
    /// @param minWithdrawTokens Min accepted tokenAmounts for withdrawal
    /// @param minDepositTokens Min accepted tokenAmounts for deposit
    /// @param deadline Timestamp after which the transaction reverts
    /// @return pulledAmounts Amounts pulled from one vault
    /// @return pushedAmounts Amounts pushed to the other vault
    /// @return depositLiquidity Amount of liquidity deposited to vault
    /// @return withdrawLiquidity Amount of liquidity withdrawn from vault
    /// @return lowerToUpper true if liquidity is moved from lower vault to upper
    function rebalanceUniV3Vaults(
        uint256[] memory minWithdrawTokens,
        uint256[] memory minDepositTokens,
        uint256 deadline
    )
        external
        returns (
            uint256[] memory pulledAmounts,
            uint256[] memory pushedAmounts,
            uint128 depositLiquidity,
            uint128 withdrawLiquidity,
            bool lowerToUpper
        )
    {
        _requireAtLeastOperator();
        require(
            block.timestamp >= lastRebalanceUniV3VaultsTimestamp + otherParams.secondsBetweenRebalances,
            ExceptionsLibrary.TIMESTAMP
        );
        lastRebalanceUniV3VaultsTimestamp = block.timestamp;
        LiquidityParams memory liquidityParams;

        {
            uint256 targetPriceX96 = getTargetPriceX96(tokens[0], tokens[1], tradingParams);
            int24 targetTick = _tickFromPriceX96(targetPriceX96);
            (
                liquidityParams.targetUniV3LiquidityRatioD,
                liquidityParams.isNegativeLiquidityRatio
            ) = targetUniV3LiquidityRatio(targetTick);
            // we crossed the interval right to left
            if (liquidityParams.isNegativeLiquidityRatio) {
                (, , uint128 liquidity) = _getVaultStats(upperVault);
                if (liquidity > 0) {
                    // pull all liquidity to other vault
                    (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity) = _rebalanceUniV3Liquidity(
                        upperVault,
                        lowerVault,
                        type(uint128).max,
                        minWithdrawTokens,
                        minDepositTokens,
                        deadline
                    );
                    return (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity, lowerToUpper);
                } else {
                    _swapVaults(false, deadline);
                    return (new uint256[](2), new uint256[](2), 0, 0, false);
                }
            }
            // we crossed the interval left to right
            if (liquidityParams.targetUniV3LiquidityRatioD > DENOMINATOR) {
                lowerToUpper = true;
                (, , uint128 liquidity) = _getVaultStats(lowerVault);
                if (liquidity > 0) {
                    (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity) = _rebalanceUniV3Liquidity(
                        lowerVault,
                        upperVault,
                        type(uint128).max,
                        minWithdrawTokens,
                        minDepositTokens,
                        deadline
                    );
                    return (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity, lowerToUpper);
                } else {
                    _swapVaults(true, deadline);
                    return (new uint256[](2), new uint256[](2), 0, 0, true);
                }
            }
        }
        uint256 liquidityDelta;
        IUniV3Vault fromVault;
        IUniV3Vault toVault;

        {
            bool isNegativeLiquidityDelta;
            (, , uint128 lowerLiquidity) = _getVaultStats(lowerVault);
            (, , uint128 upperLiquidity) = _getVaultStats(upperVault);
            (liquidityDelta, isNegativeLiquidityDelta) = _liquidityDelta(
                lowerLiquidity,
                upperLiquidity,
                DENOMINATOR - liquidityParams.targetUniV3LiquidityRatioD,
                ratioParams.minUniV3LiquidityRatioDeviationD
            );
            if (isNegativeLiquidityDelta) {
                fromVault = upperVault;
                toVault = lowerVault;
            } else {
                lowerToUpper = true;
                fromVault = lowerVault;
                toVault = upperVault;
            }
        }
        (pulledAmounts, pushedAmounts, depositLiquidity, withdrawLiquidity) = _rebalanceUniV3Liquidity(
            fromVault,
            toVault,
            uint128(liquidityDelta),
            minWithdrawTokens,
            minDepositTokens,
            deadline
        );
    }

    /// @notice Post preorder for ERC20 vault rebalance.
    /// @param minAmountOut minimum amount out of tokens to swap
    /// @return preOrder_ Posted preorder
    function postPreOrder(uint256 minAmountOut) external returns (PreOrder memory preOrder_) {
        _requireAtLeastOperator();
        require(block.timestamp > orderDeadline, ExceptionsLibrary.TIMESTAMP);
        (uint256[] memory tvl, ) = erc20Vault.tvl();
        uint256 priceX96 = getTargetPriceX96(tokens[0], tokens[1], tradingParams);
        (uint256 tokenDelta, bool isNegative) = _liquidityDelta(
            FullMath.mulDiv(tvl[0], priceX96, CommonLibrary.Q96),
            tvl[1],
            ratioParams.erc20TokenRatioD,
            ratioParams.minErc20TokenRatioDeviationD
        );
        TradingParams memory tradingParams_ = tradingParams;

        uint256 isNegativeInt = isNegative ? 1 : 0;
        uint256[2] memory tokenValuesToTransfer = [
            FullMath.mulDiv(tokenDelta, CommonLibrary.Q96, priceX96),
            tokenDelta
        ];
        uint256 amountOut = FullMath.mulDiv(
            tokenValuesToTransfer[1 ^ isNegativeInt],
            DENOMINATOR - tradingParams_.maxSlippageD,
            DENOMINATOR
        );
        amountOut = amountOut > minAmountOut ? amountOut : minAmountOut;
        preOrder_ = PreOrder({
            tokenIn: tokens[isNegativeInt],
            tokenOut: tokens[1 ^ isNegativeInt],
            deadline: uint64(block.timestamp + tradingParams_.orderDeadline),
            amountIn: tokenValuesToTransfer[isNegativeInt],
            minAmountOut: amountOut
        });

        preOrder = preOrder_;
        emit PreOrderPosted(tx.origin, msg.sender, preOrder_);
    }

    /// @notice Sign offchain cowswap order onchain
    /// @param order Cowswap order data
    /// @param uuid Cowswap order id
    /// @param signed To sign order set to `true`
    function signOrder(
        GPv2Order.Data memory order,
        bytes calldata uuid,
        bool signed
    ) external {
        _requireAtLeastOperator();
        if (signed) {
            address sellToken = address(order.sellToken);
            orderHelper.checkOrder(
                order,
                uuid,
                preOrder.tokenIn,
                preOrder.tokenOut,
                preOrder.amountIn,
                preOrder.minAmountOut,
                preOrder.deadline,
                address(erc20Vault),
                (sellToken == tokens[0] ? tradingParams.maxFee0 : tradingParams.maxFee1)
            );
            erc20Vault.externalCall(
                address(order.sellToken),
                APPROVE_SELECTOR,
                abi.encode(cowswapVaultRelayer, order.sellAmount + order.feeAmount)
            );
            erc20Vault.externalCall(cowswapSettlement, SET_PRESIGNATURE_SELECTOR, abi.encode(uuid, signed));
            orderDeadline = order.validTo;
            delete preOrder;
            emit OrderSigned(tx.origin, msg.sender, uuid, order, preOrder, signed);
        } else {
            erc20Vault.externalCall(cowswapSettlement, SET_PRESIGNATURE_SELECTOR, abi.encode(uuid, false));
        }
    }

    /// @notice Reset cowswap allowance to 0
    /// @param tokenNumber The number of token in LStrategy
    function resetCowswapAllowance(uint8 tokenNumber) external {
        _requireAtLeastOperator();
        bytes memory approveData = abi.encode(cowswapVaultRelayer, uint256(0));
        erc20Vault.externalCall(tokens[tokenNumber], APPROVE_SELECTOR, approveData);
        emit CowswapAllowanceReset(tx.origin, msg.sender);
    }

    /// @notice Collect Uniswap pool fees to erc20 vault
    /// @return totalCollectedEarnings Total collected fees
    function collectUniFees() external returns (uint256[] memory totalCollectedEarnings) {
        _requireAtLeastOperator();
        totalCollectedEarnings = new uint256[](2);
        uint256[] memory collectedEarnings = new uint256[](2);
        totalCollectedEarnings = lowerVault.collectEarnings();
        collectedEarnings = upperVault.collectEarnings();
        for (uint256 i = 0; i < 2; i++) {
            totalCollectedEarnings[i] += collectedEarnings[i];
        }
        emit FeesCollected(tx.origin, msg.sender, totalCollectedEarnings);
    }

    /// @notice Manually pull tokens from fromVault to toVault
    /// @param fromVault Pull tokens from this vault
    /// @param toVault Pull tokens to this vault
    /// @param tokenAmounts Token amounts to pull
    /// @param minTokensAmounts Minimal token amounts to pull
    /// @param deadline Timestamp after which the transaction is invalid
    function manualPull(
        IIntegrationVault fromVault,
        IIntegrationVault toVault,
        uint256[] memory tokenAmounts,
        uint256[] memory minTokensAmounts,
        uint256 deadline
    ) external returns (uint256[] memory actualTokenAmounts) {
        _requireAdmin();
        actualTokenAmounts = fromVault.pull(
            address(toVault),
            tokens,
            tokenAmounts,
            _makeUniswapVaultOptions(minTokensAmounts, deadline)
        );
        emit ManualPull(tx.origin, msg.sender, tokenAmounts, actualTokenAmounts);
    }

    /// @notice Sets new trading params
    /// @param newTradingParams New trading parameters to set
    function updateTradingParams(TradingParams calldata newTradingParams) external {
        _requireAdmin();
        require(
            (newTradingParams.maxSlippageD <= DENOMINATOR) &&
                (newTradingParams.orderDeadline <= 86400 * 30) &&
                (newTradingParams.oracleSafetyMask > 3),
            ExceptionsLibrary.INVARIANT
        );
        require(address(newTradingParams.oracle) != address(0), ExceptionsLibrary.ADDRESS_ZERO);
        tradingParams = newTradingParams;
        emit TradingParamsUpdated(tx.origin, msg.sender, tradingParams);
    }

    /// @notice Sets new ratio params
    /// @param newRatioParams New ratio parameters to set
    function updateRatioParams(RatioParams calldata newRatioParams) external {
        _requireAdmin();
        require(
            (newRatioParams.erc20UniV3CapitalRatioD <= DENOMINATOR) &&
                (newRatioParams.erc20TokenRatioD <= DENOMINATOR) &&
                (newRatioParams.minErc20UniV3CapitalRatioDeviationD <= DENOMINATOR) &&
                (newRatioParams.minErc20TokenRatioDeviationD <= DENOMINATOR) &&
                (newRatioParams.minUniV3LiquidityRatioDeviationD <= DENOMINATOR),
            ExceptionsLibrary.INVARIANT
        );
        ratioParams = newRatioParams;
        emit RatioParamsUpdated(tx.origin, msg.sender, ratioParams);
    }

    /// @notice Sets new other params
    /// @param newOtherParams New other parameters to set
    function updateOtherParams(OtherParams calldata newOtherParams) external {
        _requireAdmin();
        require(
            (newOtherParams.minToken0ForOpening > 0) &&
                (newOtherParams.minToken1ForOpening > 0) &&
                (newOtherParams.minToken0ForOpening <= 1000000000) &&
                (newOtherParams.minToken1ForOpening <= 1000000000) &&
                (newOtherParams.secondsBetweenRebalances <= 86400 * 30),
            ExceptionsLibrary.INVARIANT
        );
        otherParams = newOtherParams;
        emit OtherParamsUpdated(tx.origin, msg.sender, otherParams);
    }

    // -------------------  INTERNAL, VIEW  -------------------

    /// @notice Calculate a pure (not Uniswap) liquidity
    /// @param priceX96 Current price y / x
    /// @param vault Vault for liquidity calculation
    /// @return Capital = x * p + y
    function _getCapital(uint256 priceX96, IVault vault) internal view returns (uint256) {
        (uint256[] memory minTvl, uint256[] memory maxTvl) = vault.tvl();
        return FullMath.mulDiv((minTvl[0] + maxTvl[0]) / 2, priceX96, CommonLibrary.Q96) + (minTvl[1] + maxTvl[1]) / 2;
    }

    /// @notice Target tick based on mutable params
    function _tickFromPriceX96(uint256 priceX96) internal view returns (int24) {
        return orderHelper.tickFromPriceX96(priceX96);
    }

    /// @notice The vault to get stats from
    /// @return tickLower Lower tick for the uniV3 poistion inside the vault
    /// @return tickUpper Upper tick for the uniV3 poistion inside the vault
    /// @return liquidity Vault liquidity
    function _getVaultStats(IUniV3Vault vault)
        internal
        view
        returns (
            int24 tickLower,
            int24 tickUpper,
            uint128 liquidity
        )
    {
        (, , , , , tickLower, tickUpper, liquidity, , , , ) = positionManager.positions(vault.uniV3Nft());
    }

    /// @notice Liquidity required to be sold to reach targetLiquidityRatioD
    /// @param lowerLiquidity Lower vault liquidity
    /// @param upperLiquidity Upper vault liquidity
    /// @param targetLiquidityRatioD Target liquidity ratio (multiplied by DENOMINATOR)
    /// @param minDeviation Minimum allowed deviation between current and target liquidities (if the real is less, zero liquidity delta returned)
    /// @return delta Liquidity required to be sold from LowerVault (if isNegative is true) of to be bought to LowerVault (if isNegative is false) to reach targetLiquidityRatioD
    /// @return isNegative If `true` then delta needs to be bought to reach targetLiquidityRatioD, o/w needs to be sold
    function _liquidityDelta(
        uint256 lowerLiquidity,
        uint256 upperLiquidity,
        uint256 targetLiquidityRatioD,
        uint256 minDeviation
    ) internal pure returns (uint256 delta, bool isNegative) {
        uint256 targetLowerLiquidity = FullMath.mulDiv(
            targetLiquidityRatioD,
            lowerLiquidity + upperLiquidity,
            DENOMINATOR
        );
        if (minDeviation > 0) {
            uint256 liquidityRatioD = FullMath.mulDiv(lowerLiquidity, DENOMINATOR, lowerLiquidity + upperLiquidity);
            uint256 deviation = targetLiquidityRatioD > liquidityRatioD
                ? targetLiquidityRatioD - liquidityRatioD
                : liquidityRatioD - targetLiquidityRatioD;
            if (deviation < minDeviation) {
                return (0, false);
            }
        }
        if (targetLowerLiquidity > lowerLiquidity) {
            isNegative = true;
            delta = targetLowerLiquidity - lowerLiquidity;
        } else {
            isNegative = false;
            delta = lowerLiquidity - targetLowerLiquidity;
        }
    }

    /// @notice Covert token amounts and deadline to byte options
    /// @dev Empty tokenAmounts are equivalent to zero tokenAmounts
    function _makeUniswapVaultOptions(uint256[] memory tokenAmounts, uint256 deadline)
        internal
        pure
        returns (bytes memory options)
    {
        options = new bytes(0x60);
        assembly {
            mstore(add(options, 0x60), deadline)
        }
        if (tokenAmounts.length == 2) {
            uint256 tokenAmount0 = tokenAmounts[0];
            uint256 tokenAmount1 = tokenAmounts[1];
            assembly {
                mstore(add(options, 0x20), tokenAmount0)
                mstore(add(options, 0x40), tokenAmount1)
            }
        }
    }

    // -------------------  INTERNAL, MUTATING  -------------------

    /// @notice Pull liquidity from `fromVault` and put into `toVault`
    /// @param fromVault The vault to pull liquidity from
    /// @param toVault The vault to pull liquidity to
    /// @param desiredLiquidity The amount of liquidity desired for rebalance. This could be cut to available erc20 vault balance and available uniV3 vault liquidity.
    /// @param minWithdrawTokens Min accepted tokenAmounts for withdrawal
    /// @param minDepositTokens Min accepted tokenAmounts for deposit
    /// @param deadline Timestamp after which the transaction reverts
    /// @return pulledAmounts amounts pulled from fromVault
    /// @return pushedAmounts amounts pushed to toVault
    function _rebalanceUniV3Liquidity(
        IUniV3Vault fromVault,
        IUniV3Vault toVault,
        uint128 desiredLiquidity,
        uint256[] memory minWithdrawTokens,
        uint256[] memory minDepositTokens,
        uint256 deadline
    )
        internal
        returns (
            uint256[] memory pulledAmounts,
            uint256[] memory pushedAmounts,
            uint128 liquidity,
            uint128 withdrawLiquidity
        )
    {
        if (desiredLiquidity == 0) {
            return (new uint256[](2), new uint256[](2), 0, 0);
        }
        liquidity = desiredLiquidity;

        // Cut for available liquidity in the vault
        {
            (, , uint128 fromVaultLiquidity) = _getVaultStats(fromVault);
            liquidity = fromVaultLiquidity > liquidity ? liquidity : fromVaultLiquidity;
        }

        //--- Cut rebalance to available token balances on ERC20 Vault
        // The rough idea is to translate one unit of liquituty into tokens for each interval shouldDepositTokenAmountsD, shouldWithdrawTokenAmountsD
        // Then the actual tokens in the vault are shouldDepositTokenAmountsD * l, shouldWithdrawTokenAmountsD * l
        // So the equation could be built: erc20 balances + l * shouldWithdrawTokenAmountsD >= l * shouldDepositTokenAmountsD and l tweaked so this inequality holds
        {
            (uint256[] memory availableBalances, ) = erc20Vault.tvl();
            uint256[] memory shouldDepositTokenAmountsD = toVault.liquidityToTokenAmounts(uint128(DENOMINATOR));
            uint256[] memory shouldWithdrawTokenAmountsD = fromVault.liquidityToTokenAmounts(uint128(DENOMINATOR));
            for (uint256 i = 0; i < 2; i++) {
                uint256 availableBalance = availableBalances[i] +
                    FullMath.mulDiv(shouldWithdrawTokenAmountsD[i], liquidity, DENOMINATOR);
                uint256 requiredBalance = FullMath.mulDiv(shouldDepositTokenAmountsD[i], liquidity, DENOMINATOR);
                if (availableBalance < requiredBalance) {
                    // since balances >= 0, this case means that shouldWithdrawTokenAmountsD < shouldDepositTokenAmountsD
                    // this also means that liquidity on the line below will decrease compared to the liqiduity above
                    uint128 potentialLiquidity = uint128(
                        FullMath.mulDiv(
                            availableBalances[i],
                            DENOMINATOR,
                            shouldDepositTokenAmountsD[i] - shouldWithdrawTokenAmountsD[i]
                        )
                    );
                    liquidity = potentialLiquidity < liquidity ? potentialLiquidity : liquidity;
                }
            }
        }
        //--- End cut
        {
            withdrawLiquidity = desiredLiquidity == type(uint128).max ? desiredLiquidity : liquidity;
            uint256[] memory depositTokenAmounts = toVault.liquidityToTokenAmounts(liquidity);
            uint256[] memory withdrawTokenAmounts = fromVault.liquidityToTokenAmounts(withdrawLiquidity);
            pulledAmounts = fromVault.pull(
                address(erc20Vault),
                tokens,
                withdrawTokenAmounts,
                _makeUniswapVaultOptions(minWithdrawTokens, deadline)
            );
            // The pull is on best effort so we don't worry on overflow
            pushedAmounts = erc20Vault.pull(
                address(toVault),
                tokens,
                depositTokenAmounts,
                _makeUniswapVaultOptions(minDepositTokens, deadline)
            );
        }
        emit RebalancedUniV3(
            tx.origin,
            msg.sender,
            address(fromVault),
            address(toVault),
            pulledAmounts,
            pushedAmounts,
            desiredLiquidity,
            liquidity
        );
    }

    /// @notice Closes position with zero liquidity and creates a new one.
    /// @dev This happens when the price croses "zero" point and a new interval must be created while old one is close
    /// @param positiveTickGrowth `true` if price tick increased
    /// @param deadline Deadline for Uniswap V3 operations
    function _swapVaults(bool positiveTickGrowth, uint256 deadline) internal {
        IUniV3Vault fromVault;
        IUniV3Vault toVault;
        if (!positiveTickGrowth) {
            (fromVault, toVault) = (upperVault, lowerVault);
        } else {
            (fromVault, toVault) = (lowerVault, upperVault);
        }
        uint256 fromNft = fromVault.uniV3Nft();
        uint256 toNft = toVault.uniV3Nft();

        {
            fromVault.collectEarnings();
            (, , , , , , , uint128 fromLiquidity, , , , ) = positionManager.positions(fromNft);
            require(fromLiquidity == 0, ExceptionsLibrary.INVARIANT);
        }

        (, , , , , int24 toTickLower, int24 toTickUpper, , , , , ) = positionManager.positions(toNft);
        int24 newTickLower;
        int24 newTickUpper;
        if (positiveTickGrowth) {
            newTickLower = (toTickLower + toTickUpper) / 2;
            newTickUpper = newTickLower + int24(uint24(intervalWidthInTicks));
        } else {
            newTickUpper = (toTickLower + toTickUpper) / 2;
            newTickLower = newTickUpper - int24(uint24(intervalWidthInTicks));
        }

        uint256 newNft = _mintNewNft(newTickLower, newTickUpper, deadline);
        positionManager.safeTransferFrom(address(this), address(fromVault), newNft);
        positionManager.burn(fromNft);

        (lowerVault, upperVault) = (upperVault, lowerVault);

        emit SwapVault(fromNft, newNft, newTickLower, newTickUpper);
    }

    /// @notice Mints new Nft in Uniswap V3 positionManager
    /// @param lowerTick Lower tick of the Uni interval
    /// @param upperTick Upper tick of the Uni interval
    /// @param deadline Timestamp after which the transaction will be reverted
    function _mintNewNft(
        int24 lowerTick,
        int24 upperTick,
        uint256 deadline
    ) internal returns (uint256 newNft) {
        uint256 minToken0ForOpening = otherParams.minToken0ForOpening;
        uint256 minToken1ForOpening = otherParams.minToken1ForOpening;
        IERC20(tokens[0]).safeApprove(address(positionManager), minToken0ForOpening);
        IERC20(tokens[1]).safeApprove(address(positionManager), minToken1ForOpening);
        (newNft, , , ) = positionManager.mint(
            INonfungiblePositionManager.MintParams({
                token0: tokens[0],
                token1: tokens[1],
                fee: poolFee,
                tickLower: lowerTick,
                tickUpper: upperTick,
                amount0Desired: minToken0ForOpening,
                amount1Desired: minToken1ForOpening,
                amount0Min: 0,
                amount1Min: 0,
                recipient: address(this),
                deadline: deadline
            })
        );
        IERC20(tokens[0]).safeApprove(address(positionManager), 0);
        IERC20(tokens[1]).safeApprove(address(positionManager), 0);
    }

    /// @notice Emitted when a new cowswap preOrder is posted.
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param preOrder Preorder that was posted
    event PreOrderPosted(address indexed origin, address indexed sender, PreOrder preOrder);

    /// @notice Emitted when cowswap preOrder was signed onchain.
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param order Cowswap order
    /// @param preOrder PreOrder that the order fulfills
    /// @param signed Singned or unsigned
    event OrderSigned(
        address indexed origin,
        address indexed sender,
        bytes uuid,
        GPv2Order.Data order,
        PreOrder preOrder,
        bool signed
    );

    /// @notice Emitted when manual pull from vault is executed.
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param tokenAmounts The amounts of tokens that were
    event ManualPull(
        address indexed origin,
        address indexed sender,
        uint256[] tokenAmounts,
        uint256[] actualTokenAmounts
    );

    /// @notice Emitted when vault is swapped.
    /// @param oldNft UniV3 nft that was burned
    /// @param newNft UniV3 nft that was created
    /// @param newTickLower Lower tick for created UniV3 nft
    /// @param newTickUpper Upper tick for created UniV3 nft
    event SwapVault(uint256 oldNft, uint256 newNft, int24 newTickLower, int24 newTickUpper);

    /// @notice Emitted when rebalance from UniV3 to ERC20 or vice versa happens
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param fromErc20 `true` if the rebalance is made
    /// @param pulledAmounts amounts pulled from fromVault
    event RebalancedErc20UniV3(address indexed origin, address indexed sender, bool fromErc20, uint256[] pulledAmounts);

    /// @param fromVault The vault to pull liquidity from
    /// @param toVault The vault to pull liquidity to
    /// @param pulledAmounts amounts pulled from fromVault
    /// @param pushedAmounts amounts pushed to toVault
    /// @param desiredLiquidity The amount of liquidity desired for rebalance. This could be cut to available erc20 vault balance and available uniV3 vault liquidity.
    /// @param liquidity The actual amount of liquidity rebalanced.
    event RebalancedUniV3(
        address indexed origin,
        address indexed sender,
        address fromVault,
        address toVault,
        uint256[] pulledAmounts,
        uint256[] pushedAmounts,
        uint128 desiredLiquidity,
        uint128 liquidity
    );

    /// @notice Emitted when trading params were updated
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param tradingParams New trading parameters
    event TradingParamsUpdated(address indexed origin, address indexed sender, TradingParams tradingParams);

    /// @notice Emitted when ratio params were updated
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param ratioParams New ratio parameters
    event RatioParamsUpdated(address indexed origin, address indexed sender, RatioParams ratioParams);

    /// @notice Emitted when other params were updated
    /// @param origin Origin of the transaction (tx.origin)
    /// @param sender Sender of the call (msg.sender)
    /// @param otherParams New trading parameters
    event OtherParamsUpdated(address indexed origin, address indexed sender, OtherParams otherParams);

    event CowswapAllowanceReset(address indexed origin, address indexed sender);
    event FeesCollected(address indexed origin, address indexed sender, uint256[] collectedEarnings);
}

// SPDX-License-Identifier: BSL-1.1
pragma solidity 0.8.9;

import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";
import "../interfaces/utils/IDefaultAccessControl.sol";
import "../libraries/ExceptionsLibrary.sol";

/// @notice This is a default access control with 3 roles:
///
/// - ADMIN: allowed to do anything
/// - ADMIN_DELEGATE: allowed to do anything except assigning ADMIN and ADMIN_DELEGATE roles
/// - OPERATOR: low-privileged role, generally keeper or some other bot
contract DefaultAccessControl is IDefaultAccessControl, AccessControlEnumerable {
    bytes32 public constant OPERATOR = keccak256("operator");
    bytes32 public constant ADMIN_ROLE = keccak256("admin");
    bytes32 public constant ADMIN_DELEGATE_ROLE = keccak256("admin_delegate");

    /// @notice Creates a new contract.
    /// @param admin Admin of the contract
    constructor(address admin) {
        require(admin != address(0), ExceptionsLibrary.ADDRESS_ZERO);

        _setupRole(OPERATOR, admin);
        _setupRole(ADMIN_ROLE, admin);

        _setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
        _setRoleAdmin(ADMIN_DELEGATE_ROLE, ADMIN_ROLE);
        _setRoleAdmin(OPERATOR, ADMIN_DELEGATE_ROLE);
    }

    // -------------------------  EXTERNAL, VIEW  ------------------------------

    /// @notice Checks if the address is ADMIN or ADMIN_DELEGATE.
    /// @param sender Adddress to check
    /// @return `true` if sender is an admin, `false` otherwise
    function isAdmin(address sender) public view returns (bool) {
        return hasRole(ADMIN_ROLE, sender) || hasRole(ADMIN_DELEGATE_ROLE, sender);
    }

    /// @notice Checks if the address is OPERATOR.
    /// @param sender Adddress to check
    /// @return `true` if sender is an admin, `false` otherwise
    function isOperator(address sender) public view returns (bool) {
        return hasRole(OPERATOR, sender);
    }

    // -------------------------  INTERNAL, VIEW  ------------------------------

    function _requireAdmin() internal view {
        require(isAdmin(msg.sender), ExceptionsLibrary.FORBIDDEN);
    }

    function _requireAtLeastOperator() internal view {
        require(isAdmin(msg.sender) || isOperator(msg.sender), ExceptionsLibrary.FORBIDDEN);
    }
}

{
  "remappings": [
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@solmate/=lib/solmate/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200,
    "details": {
      "yul": true,
      "yulDetails": {
        "stackAllocation": true
      }
    }
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"admin","type":"address"},{"internalType":"address","name":"strategy_","type":"address"},{"internalType":"int24","name":"initialDelta","type":"int24"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"ADMIN_DELEGATE_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"OPERATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"isAdmin","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"isOperator","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxTicksDelta","outputs":[{"internalType":"int24","name":"","type":"int24"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"int24","name":"offchainTick","type":"int24"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"rebalanceERC20UniV3Vaults","outputs":[{"internalType":"uint256[]","name":"totalPulledAmounts","type":"uint256[]"},{"internalType":"bool","name":"isNegativeCapitalDelta","type":"bool"},{"internalType":"uint256","name":"percentageIncreaseD","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"int24","name":"offchainTick","type":"int24"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"rebalanceUniV3Vaults","outputs":[{"internalType":"uint256[]","name":"pulledAmounts","type":"uint256[]"},{"internalType":"uint256[]","name":"pushedAmounts","type":"uint256[]"},{"internalType":"uint128","name":"depositLiquidity","type":"uint128"},{"internalType":"uint128","name":"withdrawLiquidity","type":"uint128"},{"internalType":"bool","name":"lowerToUpper","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"int24","name":"newMaxTicksDelta","type":"int24"}],"name":"setDelta","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"strategy","outputs":[{"internalType":"contract LStrategy","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000007ee9247b6199877f86703644c97784495549ac5e000000000000000000000000ef39c188e2bc8eb45daf49a3fe2f72bf32050892000000000000000000000000000000000000000000000000000000000000000a

-----Decoded View---------------
Arg [0] : admin (address): 0x7ee9247b6199877F86703644c97784495549aC5E
Arg [1] : strategy_ (address): 0xeF39C188E2Bc8EB45dAF49A3fE2f72Bf32050892
Arg [2] : initialDelta (int24): 10

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000007ee9247b6199877f86703644c97784495549ac5e
Arg [1] : 000000000000000000000000ef39c188e2bc8eb45daf49a3fe2f72bf32050892
Arg [2] : 000000000000000000000000000000000000000000000000000000000000000a