Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
// @notice send a LayerZero message to the specified address at a LayerZero endpoint.
// @param _dstChainId - the destination chain identifier
// @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
// @param _payload - a custom bytes payload to send to the destination contract
// @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
// @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
// @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
// @notice used by the messaging library to publish verified payload
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source contract (as bytes) at the source chain
// @param _dstAddress - the address on destination chain
// @param _nonce - the unbound message ordering nonce
// @param _gasLimit - the gas limit for external contract execution
// @param _payload - verified payload to send to the destination contract
function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
// @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
// @notice get the outboundNonce from this source chain which, consequently, is always an EVM
// @param _srcAddress - the source chain contract address
function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
// @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
// @param _dstChainId - the destination chain identifier
// @param _userApplication - the user app address on this EVM chain
// @param _payload - the custom message to send over LayerZero
// @param _payInZRO - if false, user app pays the protocol fee in native token
// @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
// @notice get this Endpoint's immutable source identifier
function getChainId() external view returns (uint16);
// @notice the interface to retry failed message on this Endpoint destination
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
// @param _payload - the payload to be retried
function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
// @notice query if any STORED payload (message blocking) at the endpoint.
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
// @notice query if the _libraryAddress is valid for sending msgs.
// @param _userApplication - the user app address on this EVM chain
function getSendLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the _libraryAddress is valid for receiving msgs.
// @param _userApplication - the user app address on this EVM chain
function getReceiveLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the non-reentrancy guard for send() is on
// @return true if the guard is on. false otherwise
function isSendingPayload() external view returns (bool);
// @notice query if the non-reentrancy guard for receive() is on
// @return true if the guard is on. false otherwise
function isReceivingPayload() external view returns (bool);
// @notice get the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _userApplication - the contract address of the user application
// @param _configType - type of configuration. every messaging library has its own convention.
function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
// @notice get the send() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getSendVersion(address _userApplication) external view returns (uint16);
// @notice get the lzReceive() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
// @notice LayerZero endpoint will invoke this function to deliver the message on the destination
// @param _srcChainId - the source endpoint identifier
// @param _srcAddress - the source sending contract address from the source chain
// @param _nonce - the ordered message nonce
// @param _payload - the signed payload is the UA bytes has encoded to be sent
function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
// @notice set the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _configType - type of configuration. every messaging library has its own convention.
// @param _config - configuration in the bytes. can encode arbitrary content.
function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
// @notice set the send() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setSendVersion(uint16 _version) external;
// @notice set the lzReceive() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setReceiveVersion(uint16 _version) external;
// @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
// @param _srcChainId - the chainId of the source chain
// @param _srcAddress - the contract address of the source contract at the source chain
function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "../interfaces/ILayerZeroReceiver.sol";
import "../interfaces/ILayerZeroUserApplicationConfig.sol";
import "../interfaces/ILayerZeroEndpoint.sol";
import "../util/BytesLib.sol";
/*
* a generic LzReceiver implementation
*/
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
using BytesLib for bytes;
// ua can not send payload larger than this by default, but it can be changed by the ua owner
uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;
ILayerZeroEndpoint public immutable lzEndpoint;
mapping(uint16 => bytes) public trustedRemoteLookup;
mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
mapping(uint16 => uint) public payloadSizeLimitLookup;
address public precrime;
event SetPrecrime(address precrime);
event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);
constructor(address _endpoint) {
lzEndpoint = ILayerZeroEndpoint(_endpoint);
}
function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
// lzReceive must be called by the endpoint for security
require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");
bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
// if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");
_blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
// abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
_checkPayloadSize(_dstChainId, _payload.length);
lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
}
function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
uint providedGasLimit = _getGasLimit(_adapterParams);
uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
require(minGasLimit > 0, "LzApp: minGasLimit not set");
require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
}
function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
assembly {
gasLimit := mload(add(_adapterParams, 34))
}
}
function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
if (payloadSizeLimit == 0) { // use default if not set
payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
}
require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
}
//---------------------------UserApplication config----------------------------------------
function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
}
// generic config for LayerZero user Application
function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
lzEndpoint.setConfig(_version, _chainId, _configType, _config);
}
function setSendVersion(uint16 _version) external override onlyOwner {
lzEndpoint.setSendVersion(_version);
}
function setReceiveVersion(uint16 _version) external override onlyOwner {
lzEndpoint.setReceiveVersion(_version);
}
function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
}
// _path = abi.encodePacked(remoteAddress, localAddress)
// this function set the trusted path for the cross-chain communication
function setTrustedRemote(uint16 _srcChainId, bytes calldata _path) external onlyOwner {
trustedRemoteLookup[_srcChainId] = _path;
emit SetTrustedRemote(_srcChainId, _path);
}
function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
}
function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
bytes memory path = trustedRemoteLookup[_remoteChainId];
require(path.length != 0, "LzApp: no trusted path record");
return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
}
function setPrecrime(address _precrime) external onlyOwner {
precrime = _precrime;
emit SetPrecrime(_precrime);
}
function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
require(_minGas > 0, "LzApp: invalid minGas");
minDstGasLookup[_dstChainId][_packetType] = _minGas;
emit SetMinDstGas(_dstChainId, _packetType, _minGas);
}
// if the size is 0, it means default size limit
function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
payloadSizeLimitLookup[_dstChainId] = _size;
}
//--------------------------- VIEW FUNCTION ----------------------------------------
function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
return keccak256(trustedSource) == keccak256(_srcAddress);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./LzApp.sol";
import "../util/ExcessivelySafeCall.sol";
/*
* the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
* this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
* NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
*/
abstract contract NonblockingLzApp is LzApp {
using ExcessivelySafeCall for address;
constructor(address _endpoint) LzApp(_endpoint) {}
mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;
event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);
// overriding the virtual function in LzReceiver
function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
(bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
// try-catch all errors/exceptions
if (!success) {
_storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
}
}
function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
}
function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
// only internal transaction
require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
_nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
//@notice override this function
function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;
function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
// assert there is message to retry
bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
// clear the stored message
failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
// execute the message. revert if it fails again
_nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./IOFTCore.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @dev Interface of the OFT standard
*/
interface IOFT is IOFTCore, IERC20 {
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Interface of the IOFT core standard
*/
interface IOFTCore is IERC165 {
/**
* @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
* _dstChainId - L0 defined chain id to send tokens too
* _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
* _amount - amount of the tokens to transfer
* _useZro - indicates to use zro to pay L0 fees
* _adapterParam - flexible bytes array to indicate messaging adapter services in L0
*/
function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
/**
* @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
* `_from` the owner of token
* `_dstChainId` the destination chain identifier
* `_toAddress` can be any size depending on the `dstChainId`.
* `_amount` the quantity of tokens in wei
* `_refundAddress` the address LayerZero refunds if too much message fee is sent
* `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
* `_adapterParams` is a flexible bytes array to indicate messaging adapter services
*/
function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _amount, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
/**
* @dev returns the circulating amount of tokens on current chain
*/
function circulatingSupply() external view returns (uint);
/**
* @dev returns the address of the ERC20 token
*/
function token() external view returns (address);
/**
* @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
* `_nonce` is the outbound nonce
*/
event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes _toAddress, uint _amount);
/**
* @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
* `_nonce` is the inbound nonce.
*/
event ReceiveFromChain(uint16 indexed _srcChainId, address indexed _to, uint _amount);
event SetUseCustomAdapterParams(bool _useCustomAdapterParams);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "./IOFT.sol";
import "./OFTCore.sol";
// override decimal() function is needed
contract OFT is OFTCore, ERC20, IOFT {
constructor(
string memory _name,
string memory _symbol,
address _lzEndpoint
) ERC20(_name, _symbol) OFTCore(_lzEndpoint) {}
function supportsInterface(
bytes4 interfaceId
) public view virtual override(OFTCore, IERC165) returns (bool) {
return
interfaceId == type(IOFT).interfaceId ||
interfaceId == type(IERC20).interfaceId ||
super.supportsInterface(interfaceId);
}
function token() public view virtual override returns (address) {
return address(this);
}
function circulatingSupply() public view virtual override returns (uint) {
return totalSupply();
}
function _debitFrom(
address _from,
uint16,
bytes memory,
uint _amount
) internal virtual override returns (uint) {
address spender = _msgSender();
if (_from != spender) _spendAllowance(_from, spender, _amount);
_burn(_from, _amount);
return _amount;
}
function _creditTo(
uint16,
address _toAddress,
uint _amount
) internal virtual override returns (uint) {
_mint(_toAddress, _amount);
return _amount;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../lzApp/NonblockingLzApp.sol";
import "./IOFTCore.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract OFTCore is NonblockingLzApp, ERC165, IOFTCore {
using BytesLib for bytes;
uint public constant NO_EXTRA_GAS = 0;
// packet type
uint16 public constant PT_SEND = 0;
bool public useCustomAdapterParams;
constructor(address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {}
function supportsInterface(
bytes4 interfaceId
) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IOFTCore).interfaceId ||
super.supportsInterface(interfaceId);
}
function estimateSendFee(
uint16 _dstChainId,
bytes calldata _toAddress,
uint _amount,
bool _useZro,
bytes calldata _adapterParams
) public view virtual override returns (uint nativeFee, uint zroFee) {
// mock the payload for sendFrom()
bytes memory payload = abi.encode(PT_SEND, _toAddress, _amount);
return
lzEndpoint.estimateFees(
_dstChainId,
address(this),
payload,
_useZro,
_adapterParams
);
}
function sendFrom(
address _from,
uint16 _dstChainId,
bytes calldata _toAddress,
uint _amount,
address payable _refundAddress,
address _zroPaymentAddress,
bytes calldata _adapterParams
) public payable virtual override {
_send(
_from,
_dstChainId,
_toAddress,
_amount,
_refundAddress,
_zroPaymentAddress,
_adapterParams
);
}
function setUseCustomAdapterParams(
bool _useCustomAdapterParams
) public virtual onlyOwner {
useCustomAdapterParams = _useCustomAdapterParams;
emit SetUseCustomAdapterParams(_useCustomAdapterParams);
}
function _nonblockingLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual override {
uint16 packetType;
assembly {
packetType := mload(add(_payload, 32))
}
if (packetType == PT_SEND) {
_sendAck(_srcChainId, _srcAddress, _nonce, _payload);
} else {
revert("OFTCore: unknown packet type");
}
}
function _send(
address _from,
uint16 _dstChainId,
bytes memory _toAddress,
uint _amount,
address payable _refundAddress,
address _zroPaymentAddress,
bytes memory _adapterParams
) internal virtual {
_checkAdapterParams(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);
uint amount = _debitFrom(_from, _dstChainId, _toAddress, _amount);
bytes memory lzPayload = abi.encode(PT_SEND, _toAddress, amount);
_lzSend(
_dstChainId,
lzPayload,
_refundAddress,
_zroPaymentAddress,
_adapterParams,
msg.value
);
emit SendToChain(_dstChainId, _from, _toAddress, amount);
}
function _sendAck(
uint16 _srcChainId,
bytes memory,
uint64,
bytes memory _payload
) internal virtual {
(, bytes memory toAddressBytes, uint amount) = abi.decode(
_payload,
(uint16, bytes, uint)
);
address to = toAddressBytes.toAddress(0);
amount = _creditTo(_srcChainId, to, amount);
emit ReceiveFromChain(_srcChainId, to, amount);
}
function _checkAdapterParams(
uint16 _dstChainId,
uint16 _pkType,
bytes memory _adapterParams,
uint _extraGas
) internal virtual {
if (useCustomAdapterParams) {
_checkGasLimit(_dstChainId, _pkType, _adapterParams, _extraGas);
} else {
require(
_adapterParams.length == 0,
"OFTCore: _adapterParams must be empty."
);
}
}
function _debitFrom(
address _from,
uint16 _dstChainId,
bytes memory _toAddress,
uint _amount
) internal virtual returns (uint);
function _creditTo(
uint16 _srcChainId,
address _toAddress,
uint _amount
) internal virtual returns (uint);
}
// SPDX-License-Identifier: Unlicense
/*
* @title Solidity Bytes Arrays Utils
* @author Gonçalo Sá <[email protected]>
*
* @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
* The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
*/
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
function concat(
bytes memory _preBytes,
bytes memory _postBytes
)
internal
pure
returns (bytes memory)
{
bytes memory tempBytes;
assembly {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// Store the length of the first bytes array at the beginning of
// the memory for tempBytes.
let length := mload(_preBytes)
mstore(tempBytes, length)
// Maintain a memory counter for the current write location in the
// temp bytes array by adding the 32 bytes for the array length to
// the starting location.
let mc := add(tempBytes, 0x20)
// Stop copying when the memory counter reaches the length of the
// first bytes array.
let end := add(mc, length)
for {
// Initialize a copy counter to the start of the _preBytes data,
// 32 bytes into its memory.
let cc := add(_preBytes, 0x20)
} lt(mc, end) {
// Increase both counters by 32 bytes each iteration.
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// Write the _preBytes data into the tempBytes memory 32 bytes
// at a time.
mstore(mc, mload(cc))
}
// Add the length of _postBytes to the current length of tempBytes
// and store it as the new length in the first 32 bytes of the
// tempBytes memory.
length := mload(_postBytes)
mstore(tempBytes, add(length, mload(tempBytes)))
// Move the memory counter back from a multiple of 0x20 to the
// actual end of the _preBytes data.
mc := end
// Stop copying when the memory counter reaches the new combined
// length of the arrays.
end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
// Update the free-memory pointer by padding our last write location
// to 32 bytes: add 31 bytes to the end of tempBytes to move to the
// next 32 byte block, then round down to the nearest multiple of
// 32. If the sum of the length of the two arrays is zero then add
// one before rounding down to leave a blank 32 bytes (the length block with 0).
mstore(0x40, and(
add(add(end, iszero(add(length, mload(_preBytes)))), 31),
not(31) // Round down to the nearest 32 bytes.
))
}
return tempBytes;
}
function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
assembly {
// Read the first 32 bytes of _preBytes storage, which is the length
// of the array. (We don't need to use the offset into the slot
// because arrays use the entire slot.)
let fslot := sload(_preBytes.slot)
// Arrays of 31 bytes or less have an even value in their slot,
// while longer arrays have an odd value. The actual length is
// the slot divided by two for odd values, and the lowest order
// byte divided by two for even values.
// If the slot is even, bitwise and the slot with 255 and divide by
// two to get the length. If the slot is odd, bitwise and the slot
// with -1 and divide by two.
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
let newlength := add(slength, mlength)
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
switch add(lt(slength, 32), lt(newlength, 32))
case 2 {
// Since the new array still fits in the slot, we just need to
// update the contents of the slot.
// uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
sstore(
_preBytes.slot,
// all the modifications to the slot are inside this
// next block
add(
// we can just add to the slot contents because the
// bytes we want to change are the LSBs
fslot,
add(
mul(
div(
// load the bytes from memory
mload(add(_postBytes, 0x20)),
// zero all bytes to the right
exp(0x100, sub(32, mlength))
),
// and now shift left the number of bytes to
// leave space for the length in the slot
exp(0x100, sub(32, newlength))
),
// increase length by the double of the memory
// bytes length
mul(mlength, 2)
)
)
)
}
case 1 {
// The stored value fits in the slot, but the combined value
// will exceed it.
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// The contents of the _postBytes array start 32 bytes into
// the structure. Our first read should obtain the `submod`
// bytes that can fit into the unused space in the last word
// of the stored array. To get this, we read 32 bytes starting
// from `submod`, so the data we read overlaps with the array
// contents by `submod` bytes. Masking the lowest-order
// `submod` bytes allows us to add that value directly to the
// stored value.
let submod := sub(32, slength)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(
sc,
add(
and(
fslot,
0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
),
and(mload(mc), mask)
)
)
for {
mc := add(mc, 0x20)
sc := add(sc, 1)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
default {
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
// Start copying to the last used word of the stored array.
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// Copy over the first `submod` bytes of the new data as in
// case 1 above.
let slengthmod := mod(slength, 32)
let mlengthmod := mod(mlength, 32)
let submod := sub(32, slengthmod)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(sc, add(sload(sc), and(mload(mc), mask)))
for {
sc := add(sc, 1)
mc := add(mc, 0x20)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
}
}
function slice(
bytes memory _bytes,
uint256 _start,
uint256 _length
)
internal
pure
returns (bytes memory)
{
require(_length + 31 >= _length, "slice_overflow");
require(_bytes.length >= _start + _length, "slice_outOfBounds");
bytes memory tempBytes;
assembly {
switch iszero(_length)
case 0 {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// The first word of the slice result is potentially a partial
// word read from the original array. To read it, we calculate
// the length of that partial word and start copying that many
// bytes into the array. The first word we copy will start with
// data we don't care about, but the last `lengthmod` bytes will
// land at the beginning of the contents of the new array. When
// we're done copying, we overwrite the full first word with
// the actual length of the slice.
let lengthmod := and(_length, 31)
// The multiplication in the next line is necessary
// because when slicing multiples of 32 bytes (lengthmod == 0)
// the following copy loop was copying the origin's length
// and then ending prematurely not copying everything it should.
let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
let end := add(mc, _length)
for {
// The multiplication in the next line has the same exact purpose
// as the one above.
let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
mstore(tempBytes, _length)
//update free-memory pointer
//allocating the array padded to 32 bytes like the compiler does now
mstore(0x40, and(add(mc, 31), not(31)))
}
//if we want a zero-length slice let's just return a zero-length array
default {
tempBytes := mload(0x40)
//zero out the 32 bytes slice we are about to return
//we need to do it because Solidity does not garbage collect
mstore(tempBytes, 0)
mstore(0x40, add(tempBytes, 0x20))
}
}
return tempBytes;
}
function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
address tempAddress;
assembly {
tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
}
return tempAddress;
}
function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
uint8 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x1), _start))
}
return tempUint;
}
function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
uint16 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x2), _start))
}
return tempUint;
}
function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
uint32 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x4), _start))
}
return tempUint;
}
function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
uint64 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x8), _start))
}
return tempUint;
}
function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
uint96 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0xc), _start))
}
return tempUint;
}
function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
uint128 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x10), _start))
}
return tempUint;
}
function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
uint256 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x20), _start))
}
return tempUint;
}
function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
bytes32 tempBytes32;
assembly {
tempBytes32 := mload(add(add(_bytes, 0x20), _start))
}
return tempBytes32;
}
function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
bool success = true;
assembly {
let length := mload(_preBytes)
// if lengths don't match the arrays are not equal
switch eq(length, mload(_postBytes))
case 1 {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
let mc := add(_preBytes, 0x20)
let end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
} eq(add(lt(mc, end), cb), 2) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// if any of these checks fails then arrays are not equal
if iszero(eq(mload(mc), mload(cc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
function equalStorage(
bytes storage _preBytes,
bytes memory _postBytes
)
internal
view
returns (bool)
{
bool success = true;
assembly {
// we know _preBytes_offset is 0
let fslot := sload(_preBytes.slot)
// Decode the length of the stored array like in concatStorage().
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
// if lengths don't match the arrays are not equal
switch eq(slength, mlength)
case 1 {
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
if iszero(iszero(slength)) {
switch lt(slength, 32)
case 1 {
// blank the last byte which is the length
fslot := mul(div(fslot, 0x100), 0x100)
if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
// unsuccess:
success := 0
}
}
default {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := keccak256(0x0, 0x20)
let mc := add(_postBytes, 0x20)
let end := add(mc, mlength)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
for {} eq(add(lt(mc, end), cb), 2) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
if iszero(eq(sload(sc), mload(mc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;
library ExcessivelySafeCall {
uint256 constant LOW_28_MASK =
0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
/// @notice Use when you _really_ really _really_ don't trust the called
/// contract. This prevents the called contract from causing reversion of
/// the caller in as many ways as we can.
/// @dev The main difference between this and a solidity low-level call is
/// that we limit the number of bytes that the callee can cause to be
/// copied to caller memory. This prevents stupid things like malicious
/// contracts returning 10,000,000 bytes causing a local OOG when copying
/// to memory.
/// @param _target The address to call
/// @param _gas The amount of gas to forward to the remote contract
/// @param _maxCopy The maximum number of bytes of returndata to copy
/// to memory.
/// @param _calldata The data to send to the remote contract
/// @return success and returndata, as `.call()`. Returndata is capped to
/// `_maxCopy` bytes.
function excessivelySafeCall(
address _target,
uint256 _gas,
uint16 _maxCopy,
bytes memory _calldata
) internal returns (bool, bytes memory) {
// set up for assembly call
uint256 _toCopy;
bool _success;
bytes memory _returnData = new bytes(_maxCopy);
// dispatch message to recipient
// by assembly calling "handle" function
// we call via assembly to avoid memcopying a very large returndata
// returned by a malicious contract
assembly {
_success := call(
_gas, // gas
_target, // recipient
0, // ether value
add(_calldata, 0x20), // inloc
mload(_calldata), // inlen
0, // outloc
0 // outlen
)
// limit our copy to 256 bytes
_toCopy := returndatasize()
if gt(_toCopy, _maxCopy) {
_toCopy := _maxCopy
}
// Store the length of the copied bytes
mstore(_returnData, _toCopy)
// copy the bytes from returndata[0:_toCopy]
returndatacopy(add(_returnData, 0x20), 0, _toCopy)
}
return (_success, _returnData);
}
/// @notice Use when you _really_ really _really_ don't trust the called
/// contract. This prevents the called contract from causing reversion of
/// the caller in as many ways as we can.
/// @dev The main difference between this and a solidity low-level call is
/// that we limit the number of bytes that the callee can cause to be
/// copied to caller memory. This prevents stupid things like malicious
/// contracts returning 10,000,000 bytes causing a local OOG when copying
/// to memory.
/// @param _target The address to call
/// @param _gas The amount of gas to forward to the remote contract
/// @param _maxCopy The maximum number of bytes of returndata to copy
/// to memory.
/// @param _calldata The data to send to the remote contract
/// @return success and returndata, as `.call()`. Returndata is capped to
/// `_maxCopy` bytes.
function excessivelySafeStaticCall(
address _target,
uint256 _gas,
uint16 _maxCopy,
bytes memory _calldata
) internal view returns (bool, bytes memory) {
// set up for assembly call
uint256 _toCopy;
bool _success;
bytes memory _returnData = new bytes(_maxCopy);
// dispatch message to recipient
// by assembly calling "handle" function
// we call via assembly to avoid memcopying a very large returndata
// returned by a malicious contract
assembly {
_success := staticcall(
_gas, // gas
_target, // recipient
add(_calldata, 0x20), // inloc
mload(_calldata), // inlen
0, // outloc
0 // outlen
)
// limit our copy to 256 bytes
_toCopy := returndatasize()
if gt(_toCopy, _maxCopy) {
_toCopy := _maxCopy
}
// Store the length of the copied bytes
mstore(_returnData, _toCopy)
// copy the bytes from returndata[0:_toCopy]
returndatacopy(add(_returnData, 0x20), 0, _toCopy)
}
return (_success, _returnData);
}
/**
* @notice Swaps function selectors in encoded contract calls
* @dev Allows reuse of encoded calldata for functions with identical
* argument types but different names. It simply swaps out the first 4 bytes
* for the new selector. This function modifies memory in place, and should
* only be used with caution.
* @param _newSelector The new 4-byte selector
* @param _buf The encoded contract args
*/
function swapSelector(bytes4 _newSelector, bytes memory _buf)
internal
pure
{
require(_buf.length >= 4);
uint256 _mask = LOW_28_MASK;
assembly {
// load the first word of
let _word := mload(add(_buf, 0x20))
// mask out the top 4 bytes
// /x
_word := and(_word, _mask)
_word := or(_newSelector, _word)
mstore(add(_buf, 0x20), _word)
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.19;
import "./token/oft/OFT.sol";
/**
__ __ _ _
\ \ / /_ _| | ___ _ __(_) __ _
\ \ / / _` | |/ _ \ '__| |/ _` |
\ V / (_| | | __/ | | | (_| |
\_/ \__,_|_|\___|_| |_|\__,_|
*/
/// @title Valeria
/// @notice The ERC20 token (VAL) for Valeria games
/// @author @ValeriaStudios
contract Valeria is OFT {
constructor(address _lzEndpoint) OFT("Valeria", "VAL", _lzEndpoint) {
_mint(
0xa00c7632d5B84010231A342E47e92107B538B0aE,
400_000_000_000_000_000_000_000_000
);
}
}