Contract Name:
MythicEnhancements
Contract Source Code:
File 1 of 1 : MythicEnhancements
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.16;
/*
_____ __ .__ .__
/ \ ___.__._/ |_| |__ |__| ____
/ \ / < | |\ __\ | \| |/ ___\
/ Y \___ | | | | Y \ \ \___
\____|__ / ____| |__| |___| /__|\___ >
\/\/ \/ \/
Standing on the shoulders of giants -- Yuga Labs & CryptoPunks
* Written by Aleph 0ne for the ApeLiquid community *
* Mythic Enhancements by ApeLiquid.io (OpenSea Creator Fees) *
*/
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC1155/[email protected]
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(
address indexed operator,
address indexed from,
address indexed to,
uint256 id,
uint256 value
);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(
address indexed account,
address indexed operator,
bool approved
);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
external
view
returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator)
external
view
returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File @openzeppelin/contracts/token/ERC1155/[email protected]
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC1155/extensions/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// File @openzeppelin/contracts/token/ERC1155/[email protected]
pragma solidity ^0.8.0;
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
public
view
virtual
override
returns (uint256)
{
require(
account != address(0),
"ERC1155: address zero is not a valid owner"
);
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(
accounts.length == ids.length,
"ERC1155: accounts and ids length mismatch"
);
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
uint256 fromBalance = _balances[id][from];
require(
fromBalance >= amount,
"ERC1155: insufficient balance for transfer"
);
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(
fromBalance >= amount,
"ERC1155: insufficient balance for transfer"
);
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(
operator,
from,
to,
ids,
amounts,
data
);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(
operator,
address(0),
to,
id,
amount,
data
);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(
operator,
address(0),
to,
ids,
amounts,
data
);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(
fromBalance >= amount,
"ERC1155: burn amount exceeds balance"
);
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `ids` and `amounts` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
/**
* @dev Hook that is called after any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155Received(
operator,
from,
id,
amount,
data
)
returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155BatchReceived(
operator,
from,
ids,
amounts,
data
)
returns (bytes4 response) {
if (
response != IERC1155Receiver.onERC1155BatchReceived.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element)
private
pure
returns (uint256[] memory)
{
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/token/ERC1155/extensions/[email protected]
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of ERC1155 that adds tracking of total supply per id.
*
* Useful for scenarios where Fungible and Non-fungible tokens have to be
* clearly identified. Note: While a totalSupply of 1 might mean the
* corresponding is an NFT, there is no guarantees that no other token with the
* same id are not going to be minted.
*/
abstract contract ERC1155Supply is ERC1155 {
mapping(uint256 => uint256) private _totalSupply;
/**
* @dev Total amount of tokens in with a given id.
*/
function totalSupply(uint256 id) public view virtual returns (uint256) {
return _totalSupply[id];
}
/**
* @dev Indicates whether any token exist with a given id, or not.
*/
function exists(uint256 id) public view virtual returns (bool) {
return ERC1155Supply.totalSupply(id) > 0;
}
/**
* @dev See {ERC1155-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual override {
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
if (from == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] += amounts[i];
}
}
if (to == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 supply = _totalSupply[id];
require(
supply >= amount,
"ERC1155: burn amount exceeds totalSupply"
);
unchecked {
_totalSupply[id] = supply - amount;
}
}
}
}
}
// SafeMath
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transfer.selector, to, value)
);
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, value)
);
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(
oldAllowance >= value,
"SafeERC20: decreased allowance below zero"
);
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(
data,
"SafeERC20: low-level call failed"
);
if (returndata.length > 0) {
// Return data is optional
require(
abi.decode(returndata, (bool)),
"SafeERC20: ERC20 operation did not succeed"
);
}
}
}
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value)
private
view
returns (bool)
{
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index)
private
view
returns (bytes32)
{
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value)
internal
returns (bool)
{
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value)
internal
returns (bool)
{
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value)
internal
view
returns (bool)
{
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index)
internal
view
returns (bytes32)
{
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set)
internal
view
returns (bytes32[] memory)
{
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value)
internal
returns (bool)
{
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index)
internal
view
returns (address)
{
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set)
internal
view
returns (address[] memory)
{
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index)
internal
view
returns (uint256)
{
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set)
internal
view
returns (uint256[] memory)
{
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// OPENSEA BULLSHIT
pragma solidity ^0.8.13;
interface IOperatorFilterRegistry {
function isOperatorAllowed(address registrant, address operator)
external
view
returns (bool);
function register(address registrant) external;
function registerAndSubscribe(address registrant, address subscription)
external;
function registerAndCopyEntries(
address registrant,
address registrantToCopy
) external;
function unregister(address addr) external;
function updateOperator(
address registrant,
address operator,
bool filtered
) external;
function updateOperators(
address registrant,
address[] calldata operators,
bool filtered
) external;
function updateCodeHash(
address registrant,
bytes32 codehash,
bool filtered
) external;
function updateCodeHashes(
address registrant,
bytes32[] calldata codeHashes,
bool filtered
) external;
function subscribe(address registrant, address registrantToSubscribe)
external;
function unsubscribe(address registrant, bool copyExistingEntries) external;
function subscriptionOf(address addr) external returns (address registrant);
function subscribers(address registrant)
external
returns (address[] memory);
function subscriberAt(address registrant, uint256 index)
external
returns (address);
function copyEntriesOf(address registrant, address registrantToCopy)
external;
function isOperatorFiltered(address registrant, address operator)
external
returns (bool);
function isCodeHashOfFiltered(address registrant, address operatorWithCode)
external
returns (bool);
function isCodeHashFiltered(address registrant, bytes32 codeHash)
external
returns (bool);
function filteredOperators(address addr)
external
returns (address[] memory);
function filteredCodeHashes(address addr)
external
returns (bytes32[] memory);
function filteredOperatorAt(address registrant, uint256 index)
external
returns (address);
function filteredCodeHashAt(address registrant, uint256 index)
external
returns (bytes32);
function isRegistered(address addr) external returns (bool);
function codeHashOf(address addr) external returns (bytes32);
}
pragma solidity ^0.8.13;
//import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";
/**
* @title OperatorFilterer
* @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
* registrant's entries in the OperatorFilterRegistry.
* @dev This smart contract is meant to be inherited by token contracts so they can use the following:
* - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
* - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
*/
abstract contract OperatorFilterer {
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (subscribe) {
OPERATOR_FILTER_REGISTRY.registerAndSubscribe(
address(this),
subscriptionOrRegistrantToCopy
);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(
address(this),
subscriptionOrRegistrantToCopy
);
} else {
OPERATOR_FILTER_REGISTRY.register(address(this));
}
}
}
}
modifier onlyAllowedOperator(address from) virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
// Allow spending tokens from addresses with balance
// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
// from an EOA.
if (from == msg.sender) {
_;
return;
}
if (
!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(
address(this),
msg.sender
)
) {
revert OperatorNotAllowed(msg.sender);
}
}
_;
}
modifier onlyAllowedOperatorApproval(address operator) virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (
!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(
address(this),
operator
)
) {
revert OperatorNotAllowed(operator);
}
}
_;
}
}
pragma solidity ^0.8.0;
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*
* NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
* tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
* to run tests before sending real value to this contract.
*/
contract PaymentSplitter is Context {
event PayeeAdded(address account, uint256 shares);
event PaymentReleased(address to, uint256 amount);
event ERC20PaymentReleased(
IERC20 indexed token,
address to,
uint256 amount
);
event PaymentReceived(address from, uint256 amount);
uint256 private _totalShares;
uint256 private _totalReleased;
mapping(address => uint256) private _shares;
mapping(address => uint256) private _released;
address[] private _payees;
mapping(IERC20 => uint256) private _erc20TotalReleased;
mapping(IERC20 => mapping(address => uint256)) private _erc20Released;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/
constructor(address[] memory payees, uint256[] memory shares_) payable {
require(
payees.length == shares_.length,
"PaymentSplitter: payees and shares length mismatch"
);
require(payees.length > 0, "PaymentSplitter: no payees");
for (uint256 i = 0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/
receive() external payable virtual {
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/
function totalShares() public view returns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/
function totalReleased() public view returns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
* contract.
*/
function totalReleased(IERC20 token) public view returns (uint256) {
return _erc20TotalReleased[token];
}
/**
* @dev Getter for the amount of shares held by an account.
*/
function shares(address account) public view returns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/
function released(address account) public view returns (uint256) {
return _released[account];
}
/**
* @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
* IERC20 contract.
*/
function released(IERC20 token, address account)
public
view
returns (uint256)
{
return _erc20Released[token][account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/
function payee(uint256 index) public view returns (address) {
return _payees[index];
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/
function release(address payable account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = address(this).balance + totalReleased();
uint256 payment = _pendingPayment(
account,
totalReceived,
released(account)
);
require(payment != 0, "PaymentSplitter: account is not due payment");
_released[account] += payment;
_totalReleased += payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
* percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
* contract.
*/
function release(IERC20 token, address account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = token.balanceOf(address(this)) +
totalReleased(token);
uint256 payment = _pendingPayment(
account,
totalReceived,
released(token, account)
);
require(payment != 0, "PaymentSplitter: account is not due payment");
_erc20Released[token][account] += payment;
_erc20TotalReleased[token] += payment;
SafeERC20.safeTransfer(token, account, payment);
emit ERC20PaymentReleased(token, account, payment);
}
/**
* @dev internal logic for computing the pending payment of an `account` given the token historical balances and
* already released amounts.
*/
function _pendingPayment(
address account,
uint256 totalReceived,
uint256 alreadyReleased
) private view returns (uint256) {
return
(totalReceived * _shares[account]) / _totalShares - alreadyReleased;
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/
function _addPayee(address account, uint256 shares_) private {
require(
account != address(0),
"PaymentSplitter: account is the zero address"
);
require(shares_ > 0, "PaymentSplitter: shares are 0");
require(
_shares[account] == 0,
"PaymentSplitter: account already has shares"
);
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
pragma solidity ^0.8.13;
//import {OperatorFilterer} from "./OperatorFilterer.sol";
/**
* @title DefaultOperatorFilterer
* @notice Inherits from OperatorFilterer and automatically subscribes to the default
* OpenSea subscription.
*/
abstract contract DefaultOperatorFilterer is OperatorFilterer {
address constant DEFAULT_SUBSCRIPTION =
address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);
constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
contract MythicEnhancements is
Ownable,
PaymentSplitter,
DefaultOperatorFilterer,
ERC1155
{
using Strings for uint256;
// Sale Status
bool public saleIsActive = false;
address public LiquidDeployer = 0x866cfDa1B7cD90Cd250485cd8b700211480845D7;
uint256 public RandomNumberRange = 100;
string private baseURI = "https://apeliquid.io/enhancements/json/";
string public name = "Mythic Ehnancements";
mapping(uint256 => bool) public validItem;
uint256 private maxItemID = 24;
// Liquid METL -- bang your head as you read this line of code
address public METLToken = 0xFcbE615dEf610E806BB64427574A2c5c1fB55510;
// Specify the IERC20 interface to the METL Token
IERC20 METLTokenAddress = IERC20(address(METLToken));
uint256 public mintMETLRequired = 10 ether;
uint256 public mintETHRequired = 1000000000000000;
event SetBaseURI(string indexed _baseURI);
// Enumerate all the items for minting
constructor()
ERC1155("MythicEnhancements")
PaymentSplitter(_payees, _shares)
{
validItem[1] = true;
validItem[2] = true;
validItem[3] = true;
validItem[4] = true;
validItem[5] = true;
validItem[6] = true;
validItem[7] = true;
validItem[8] = true;
validItem[9] = true;
validItem[10] = true;
validItem[11] = true;
validItem[12] = true;
validItem[13] = true;
validItem[14] = true;
validItem[15] = true;
validItem[16] = true;
validItem[17] = true;
validItem[18] = true;
validItem[19] = true;
validItem[20] = true;
validItem[21] = true;
validItem[22] = true;
validItem[23] = true;
validItem[24] = true;
emit SetBaseURI(baseURI);
}
// -------------------------------------------------------------------
// Functions for setting variables and changing values (only by owner)
// -------------------------------------------------------------------
function setRandomNumberRange(uint256 r) external onlyOwner {
RandomNumberRange = r;
}
/**
* @notice Airdrop tokens to multiple addresses at once.
* No strict supply is set in the contract. All methods are ownerOnly,
* it is up to the owner to control the supply by not minting
* past their desired number for each token.
* @dev Airdrop tokens to each address in the calldata list,
* setting the supply to the length of the list + previously minted (airdropped) supply.
* Add an address once per token you would like to send.
* @param _tokenIds The tokenIDs to send
* @param _list address[] list of wallets to send tokens to
* @param _qty The qty of each token we are sending
*/
function airdrop(
uint256[] memory _tokenIds,
address[] calldata _list,
uint256[] memory _qty
) external onlyOwner {
for (uint256 i = 0; i < _list.length; i++) {
_mint(_list[i], _tokenIds[i], _qty[i], "Drop-a-palooza error!");
}
}
function updateBaseUri(string memory _baseURI) external onlyOwner {
baseURI = _baseURI;
emit SetBaseURI(baseURI);
}
function uri(uint256 typeId) public view override returns (string memory) {
require(validItem[typeId], "URI requested for invalid type");
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, typeId.toString()))
: baseURI;
}
// -------------------------------------------------------------------------------
// MINT and Sale details
// -------------------------------------------------------------------------------
event SaleActivation(bool isActive);
function toggleSaleStatus() external onlyOwner {
saleIsActive = !saleIsActive;
emit SaleActivation(saleIsActive);
}
event ItemMinted(
address contractAddress,
uint256 tokenId,
uint256 timestamp
);
function newMints(uint256 _count) private {
for (uint256 i = 0; i < _count; i++) {
uint256 randomItem = RandomNumber(maxItemID);
_mint(msg.sender, randomItem, 1, "Mint Failed");
emit ItemMinted(msg.sender, randomItem, block.timestamp);
}
}
// @notice mint The mint function, which can be done in ETH or METL
// @params _count How many to mint
// @params mintInMETL Boolean that determines if mint is in METL (or ETH)
function mint(uint256 _count, bool mintInMETL) public payable {
require(saleIsActive, "Sale not active!");
if (mintInMETL) {
require(
METLTokenAddress.allowance(msg.sender, address(this)) >=
mintMETLRequired * _count,
"Error: Transfer not approved"
);
METLTokenAddress.transferFrom(
msg.sender,
address(this),
(mintMETLRequired) * _count
);
} else {
require(
mintETHRequired * _count <= msg.value,
"Not Enough ETH to mint!"
);
}
newMints(_count);
}
// @notice Generate random number based on totalnumbers
// @param totalnumbers The Maximum number to return (i.e. 100 returns 0-99)
function RandomNumber(uint256 totalnumbers) public view returns (uint256) {
uint256 seed = uint256(
keccak256(
abi.encodePacked(
block.timestamp +
block.difficulty +
((
uint256(keccak256(abi.encodePacked(block.coinbase)))
) / (block.timestamp)) +
block.gaslimit +
((uint256(keccak256(abi.encodePacked(msg.sender)))) /
(block.timestamp)) +
block.number
)
)
);
return seed % totalnumbers;
}
// -------------------------------------------------------------------------------
// PRIVATE FUNCTIONS + ADDITIONAL REQUIREMENTS FOR CONTRACT
// -------------------------------------------------------------------------------
function DestroyWeapons(
address tokenOwner,
uint256 tokenId,
uint256 totalToBurn
) external onlyOwner {
_burn(tokenOwner, tokenId, totalToBurn);
}
function changeMintETH(uint256 neweth) external onlyOwner {
mintETHRequired = neweth;
}
function changeMintMETL(uint256 neweth) external onlyOwner {
mintMETLRequired = neweth;
}
function receiveETH() public payable {
require(msg.value > mintETHRequired, "Not enough ETH");
}
// Payments using splitter go here...
address[] public _payees = [
0x7FDE663601A53A6953bbb98F1Ab87E86dEE81b35, // Liquid Payments
0x867Eb0804eACA9FEeda8a0E1d2B9a32eEF58AF8f,
0x0C07747AB98EE84971C90Fbd353eda207B737c43,
0xfebbB48C8f7A67Dc3DcEE19524A410E078e6A6a1
];
uint256[] private _shares = [5, 65, 15, 15];
// Payments
function claim() external {
release(payable(msg.sender));
}
/**
* @notice Withdraw all tokens from the contract (emergency function)
*/
function removeAllMETL() public onlyOwner {
uint256 balance = METLTokenAddress.balanceOf(address(this));
METLTokenAddress.transfer(LiquidDeployer, balance);
}
// OpenSea's new bullshit requirements, which violate my moral code, but
// are nonetheless necessary to make this all work properly.
function setApprovalForAll(address operator, bool approved)
public
override
onlyAllowedOperatorApproval(operator)
{
super.setApprovalForAll(operator, approved);
}
// Take my love, take my land, Take me where I cannot stand.
// I don't care, I'm still free, You can't take the sky from me.
//
function SelfDestruct() external onlyOwner {
// Walk through all the keys and return them to the contract
removeAllMETL();
address payable os = payable(address(LiquidDeployer));
selfdestruct(os);
}
}