Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
interface IUniswapV2Factory {
function createPair(
address tokenA,
address tokenB
) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
)
external
payable
returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Midget is Context, IERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 private uniswapV2Router;
struct TokenHolder {
address holder;
uint256 balance;
}
TokenHolder[] tokenHolders;
uint256 firstBlock;
uint256 tokenHoldersCount;
address private uniswapV2Pair;
address public adminWallet;
address payable public taxWallet;
string private constant _name = unicode"The Midget’s secret";
string private constant _symbol = unicode"MIDGET";
uint256 public buyTax = 20; // 20%
uint256 public sellTax = 20; // 20%
uint8 private constant _decimals = 18;
uint256 private constant _tTotal = 1089 * 10 ** _decimals; // 1089
uint256 public maxTxAmount = _tTotal.div(100); // 1% of total supply
uint256 public maxWalletSize = _tTotal.mul(2).div(100); // 2% of total supply
uint256 public initialTokenAmountForLp = _tTotal; // 100% of total supply
uint256 public taxSwapThreshold = _tTotal.div(1000); // 0.1% of total supply
uint256 public maxTaxSwap = _tTotal.div(1000); // 0.1% of total supply
bool private tradingOpen = false;
bool private inSwap = false;
bool private swapEnabled = false;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
mapping(address => bool) private _isExitHolder;
mapping(address => uint256) private _tokenHolderIndex;
modifier lockTheSwap() {
inSwap = true;
_;
inSwap = false;
}
event MaxTxAmountUpdated(uint maxTxAmount);
constructor() {
adminWallet = _msgSender();
taxWallet = payable(0x2FF4cb530B2b33A49991DE9dD8c1eF7C90E06D6c); // midgeteth.eth
_balances[_msgSender()] = _tTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[taxWallet] = true;
setTokenHolders(_msgSender());
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(
address owner,
address spender
) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(
address spender,
uint256 amount
) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (
from == uniswapV2Pair &&
to != address(uniswapV2Router) &&
!_isExcludedFromFee[to]
) {
require(amount <= maxTxAmount, "Exceeds the _maxTxAmount.");
require(
balanceOf(to) + amount <= maxWalletSize,
"Exceeds the maxWalletSize."
);
if (firstBlock + 1 > block.number) {
require(!isContract(to));
}
}
if (to != uniswapV2Pair && !_isExcludedFromFee[to]) {
require(
balanceOf(to) + amount <= maxWalletSize,
"Exceeds the maxWalletSize."
);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (
!inSwap &&
to == uniswapV2Pair &&
swapEnabled &&
contractTokenBalance > taxSwapThreshold
) {
swapTokensForEth(
min(amount, min(contractTokenBalance, maxTaxSwap))
);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
uint256 taxAmount = 0;
if (
(_isExcludedFromFee[from] || _isExcludedFromFee[to]) ||
(from != uniswapV2Pair && to != uniswapV2Pair)
) {
taxAmount = 0;
} else {
//Set Fee for Buys
if (from == uniswapV2Pair && to != address(uniswapV2Router)) {
taxAmount = amount
.mul(buyTax)
.div(100);
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
taxAmount = amount
.mul(sellTax)
.div(100);
}
}
if (taxAmount > 0) {
_balances[address(this)] = _balances[address(this)].add(taxAmount);
setTokenHolders(address(this));
emit Transfer(from, address(this), taxAmount);
}
_balances[from] = _balances[from].sub(amount);
_balances[to] = _balances[to].add(amount.sub(taxAmount));
setTokenHolders(from);
setTokenHolders(to);
emit Transfer(from, to, amount.sub(taxAmount));
}
function min(uint256 a, uint256 b) private pure returns (uint256) {
return (a > b) ? b : a;
}
function isContract(address account) private view returns (bool) {
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
function swapTokensForEth(uint256 _tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), _tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
_tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function manualswap(uint256 _tokenAmount) external {
require(
(msg.sender == adminWallet) || (msg.sender == owner()),
"Only admin can call this method."
);
require(
_tokenAmount <= balanceOf(address(this)),
"Exceeds the maxWalletSize."
);
swapTokensForEth(_tokenAmount);
}
function withdrawFees() external {
require(
(msg.sender == adminWallet) || (msg.sender == owner()),
"Only admin can call this method."
);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setBuyTax(uint256 _buyTax) external onlyOwner {
buyTax = _buyTax;
}
function setSellTax(uint256 _sellTax) external onlyOwner {
sellTax = _sellTax;
}
function setMaxTxAmount(uint256 _maxTxAmount) external onlyOwner {
maxTxAmount = _maxTxAmount;
}
function setMaxWalletSize(uint256 _maxWalletSize) external onlyOwner {
maxWalletSize = _maxWalletSize;
}
function removeLimits() external onlyOwner {
maxTxAmount = _tTotal;
maxWalletSize = _tTotal;
emit MaxTxAmountUpdated(_tTotal);
}
function setMaxTaxSwap(uint256 _maxTaxSwap) external onlyOwner {
maxTaxSwap = _maxTaxSwap;
}
function setTaxSwapThreshold(uint256 _taxSwapThreshold) external onlyOwner {
taxSwapThreshold = _taxSwapThreshold;
}
function toggleSwap(bool _swapEnabled) external onlyOwner {
swapEnabled = _swapEnabled;
}
function sendETHToFee(uint256 _amount) private {
taxWallet.transfer(_amount);
}
function setTokenHolders(address _holder) private {
if (_isExitHolder[_holder]) {
uint256 tokenHolderId = _tokenHolderIndex[_holder];
TokenHolder storage tokenHolder = tokenHolders[tokenHolderId];
tokenHolder.balance = _balances[_holder];
} else {
_tokenHolderIndex[_holder] = tokenHoldersCount;
tokenHolders.push(TokenHolder(_holder, _balances[_holder]));
_isExitHolder[_holder] = true;
tokenHoldersCount ++;
}
}
function getHolders() public view returns (TokenHolder[] memory) {
return tokenHolders;
}
function openTrading() external onlyOwner {
require(!tradingOpen, "trading is already open");
require(balanceOf(address(this)) >= initialTokenAmountForLp, "insufficient token balance");
uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
address(this),
uniswapV2Router.WETH()
);
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
initialTokenAmountForLp,
0,
0,
address(0),
block.timestamp
);
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
swapEnabled = true;
tradingOpen = true;
firstBlock = block.number;
}
receive() external payable {}
}