Contract Source Code:
File 1 of 1 : TREN
// ❚█══█❚ ❚█══█❚ ❚█══█❚ ୧ʕ•̀ᴥ•́ʔ୨ ❚█══█❚ ❚█══█❚ ❚█══█❚
pragma solidity ^0.6.2;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @title SafeMathInt
* @dev Math operations for int256 with overflow safety checks.
*/
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
/**
* @title SafeMathUint
* @dev Math operations with safety checks that revert on error
*/
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 9;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () public {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
contract TREN is Context, IERC20, Ownable, ReentrancyGuard {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) public _isBlacklistWallet;
mapping (address => bool) private isinwl;
mapping (address => bool) public isExcludedFromMax;
mapping (address => bool) public isrouterother;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tTotalDistributedToken;
uint256 private maxBuyLimit = 20000000000 * (10**18);
uint256 public maxWallet = _tTotal.div(10000).mul(50);
string private _name = "Inubolic";
string private _symbol = "TREN";
uint8 private _decimals = 18;
uint256 public _taxFee = 0;
uint256 private _previousTaxFee = _taxFee;
uint256 public _marketingFee = 40;
uint256 public _burnFee = 0;
uint256 public _liquidityFee = 0;
uint256 public _devFee = 0;
uint256 private _marketingDevLiquidNBurnFee = _marketingFee + _burnFee + _liquidityFee + _devFee;
uint256 private _previousMarketingDevLiquidNBurnFee = _marketingDevLiquidNBurnFee;
uint256 accumulatedForLiquid;
uint256 accumulatedForMarketing;
uint256 accumulatedForDev;
uint256 public stakeRewardSupply;
address public deadWallet = 0x000000000000000000000000000000000000dEaD;
address public marketingWallet;
address public devWallet;
address public promotionWallet;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
bool public CEX = false;
bool public trading = false;
bool public limitsEnabled = true;
bool public routerselllimit = true;
uint256 private numTokensSellToAddToLiquidity = 10000000 * 10**18;
uint256 private routerselllimittokens = 2500000000 * 10**18;
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //For Mainnet
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
marketingWallet = _msgSender();
devWallet = _msgSender();
promotionWallet = _msgSender();
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalDistributedFees() public view returns (uint256) {
return _tTotalDistributedToken;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingWallet(address account) external onlyOwner() {
marketingWallet = account;
}
function setPromoWallet(address account) external onlyOwner() {
promotionWallet = account;
}
function setDevWallet(address account) external onlyOwner() {
devWallet = account;
}
function setBlacklistWallet(address account, bool blacklisted) external onlyOwner() {
_isBlacklistWallet[account] = blacklisted;
}
function setFeesPercent(uint256 distributionFee, uint256 liquidityFee, uint256 marketingFee, uint256 burnFee,uint256 devFee ) external onlyOwner() {
require(distributionFee + liquidityFee + marketingFee + burnFee + devFee <= 900, "Total tax should not more than 90% (900/1000)");
_taxFee = distributionFee;
_liquidityFee = liquidityFee;
_marketingFee = marketingFee;
_burnFee = burnFee;
_devFee = devFee;
_marketingDevLiquidNBurnFee = _liquidityFee + _marketingFee + _burnFee + _devFee;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
function setLimitsEnabled(bool _enabled) public onlyOwner() {
limitsEnabled = _enabled;
}
function setTradingEnabled(bool _enabled) public onlyOwner() {
trading = _enabled;
}
function RouterSellLimitEnabled(bool _enabled) public onlyOwner() {
routerselllimit = _enabled;
}
function setTransferDelay(bool _enabled) public onlyOwner() {
transferDelayEnabled = _enabled;
}
function setThresoldToSwap(uint256 amount) public onlyOwner() {
numTokensSellToAddToLiquidity = amount;
}
function setRouterSellLimitTokens(uint256 amount) public onlyOwner() {
routerselllimittokens = amount;
}
function setMaxBuyLimit(uint256 percentage) public onlyOwner() {
maxBuyLimit = _tTotal.div(10**4).mul(percentage);
}
function setMaxWallet(uint256 percentage) public onlyOwner() {
require(percentage >= 150);
maxWallet = _tTotal.div(10000).mul(percentage);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tTotalDistributedToken = _tTotalDistributedToken.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingDevStakeLiquidBurnFee) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tMarketingDevStakeLiquidBurnFee, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingDevStakeLiquidBurnFee);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tMarketingDevLiquidBurnFee = calculateMarketingDevLiquidNBurnFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tMarketingDevLiquidBurnFee);
return (tTransferAmount, tFee, tMarketingDevLiquidBurnFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tMarketingDevStakeLiquidBurnFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rMarketingDevStakeLiquidBurnFee = tMarketingDevStakeLiquidBurnFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rMarketingDevStakeLiquidBurnFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeMarketingDevLiquidBurnFee(uint256 tMarketingDevLiquidBurnFee, address sender) private {
if(_marketingDevLiquidNBurnFee == 0){
return;
}
uint256 tMarketing = tMarketingDevLiquidBurnFee.mul(_marketingFee).div(_marketingDevLiquidNBurnFee);
uint256 tDev = tMarketingDevLiquidBurnFee.mul(_devFee).div(_marketingDevLiquidNBurnFee);
uint256 tBurn = tMarketingDevLiquidBurnFee.mul(_burnFee).div(_marketingDevLiquidNBurnFee);
uint256 tLiquid = tMarketingDevLiquidBurnFee.sub(tMarketing).sub(tDev).sub(tBurn);
_sendFee(sender, deadWallet, tBurn);
accumulatedForLiquid = accumulatedForLiquid.add(tLiquid);
accumulatedForMarketing = accumulatedForMarketing.add(tMarketing);
accumulatedForDev = accumulatedForDev.add(tDev);
_sendFee(sender, address(this), tLiquid.add(tMarketing).add(tDev));
}
function _sendFee(address from, address to, uint256 amount) private{
uint256 currentRate = _getRate();
uint256 rAmount = amount.mul(currentRate);
_rOwned[to] = _rOwned[to].add(rAmount);
if(_isExcluded[to])
_tOwned[to] = _tOwned[to].add(amount);
emit Transfer(from, to, amount);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**3
);
}
function calculateMarketingDevLiquidNBurnFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_marketingDevLiquidNBurnFee).div(
10**3
);
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingDevLiquidNBurnFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingDevLiquidNBurnFee = _marketingDevLiquidNBurnFee;
_taxFee = 0;
_marketingDevLiquidNBurnFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingDevLiquidNBurnFee = _previousMarketingDevLiquidNBurnFee;
}
function setWL(address wl) public onlyOwner() {
isinwl[wl] = true;
isExcludedFromMax[wl] = true;
}
function delwl(address notwl) public onlyOwner() {
isinwl[notwl] = false;
isExcludedFromMax[notwl] = false;
}
function manualswap() external lockTheSwap onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external onlyOwner() {
uint256 amount = address(this).balance;
uint256 ethMarketing = amount.mul(_marketingFee).div(_devFee.add(_marketingFee));
uint256 ethDev = amount.mul(_devFee).div(_devFee.add(_marketingFee));
//Send out fees
if(ethDev > 0)
payable(devWallet).transfer(ethDev);
if(ethMarketing > 0)
payable(marketingWallet).transfer(ethMarketing);
}
function manualswapcustom(uint256 percentage) external lockTheSwap onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
uint256 swapbalance = contractBalance.div(10**5).mul(percentage);
swapTokensForEth(swapbalance);
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(_isBlacklistWallet[from] == false, "You're in blacklist");
if(limitsEnabled){
if(!isExcludedFromMax[to] && !_isExcludedFromFee[to] && from != owner() && to != owner() && to != uniswapV2Pair ){
require(amount <= maxBuyLimit,"Over the Max buy");
require(amount.add(balanceOf(to)) <= maxWallet);
}
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!inSwapAndLiquify
){
if(!trading){
require(_isExcludedFromFee[from] || _isExcludedFromFee[to] || isinwl[to], "Trading is not active.");
}
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
}
}
uint256 swapAmount = accumulatedForLiquid.add(accumulatedForMarketing).add(accumulatedForDev);
bool overMinTokenBalance = swapAmount >= numTokensSellToAddToLiquidity;
if (
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled &&
overMinTokenBalance
) {
//swap add liquid
swapAndLiquify();
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to] || (from != uniswapV2Pair && to != uniswapV2Pair)){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify() private lockTheSwap {
uint256 totalcontracttokens = accumulatedForDev.add(accumulatedForLiquid).add(accumulatedForMarketing);
uint256 remainForDev = 0;
uint256 remainForMarketing = 0;
uint256 remainForLiq = 0;
if (routerselllimit && totalcontracttokens > numTokensSellToAddToLiquidity.mul(20)){
remainForDev = accumulatedForDev.div(20).mul(19);
accumulatedForDev = accumulatedForDev.sub(remainForDev);
remainForMarketing = accumulatedForMarketing.div(20).mul(19);
accumulatedForMarketing = accumulatedForMarketing.sub(remainForMarketing);
remainForLiq = accumulatedForLiquid.div(20).mul(19);
accumulatedForLiquid = accumulatedForLiquid.sub(remainForLiq);
}
// split the liquidity balance into halves
uint256 half = accumulatedForLiquid .div(2);
uint256 otherHalf = accumulatedForLiquid.sub(half);
uint256 swapAmount = half.add(accumulatedForMarketing).add(accumulatedForDev);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(swapAmount); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 delta = address(this).balance.sub(initialBalance);
uint256 ethLiquid = delta.mul(half).div(swapAmount);
uint256 ethMarketing = delta.mul(accumulatedForMarketing).div(swapAmount);
uint256 ethDev = delta.sub(ethLiquid).sub(ethMarketing);
uint256 ethpromo = ethMarketing.mul(2).div(6);
uint256 ethmarketers = ethMarketing.mul(4).div(6);
if(ethLiquid > 0){
// add liquidity to uniswap
addLiquidity(otherHalf, ethLiquid);
emit SwapAndLiquify(half, ethLiquid, otherHalf);
}
if(ethMarketing > 0){
payable(marketingWallet).transfer(ethmarketers);
payable(promotionWallet).transfer(ethpromo);
}
if(ethDev > 0){
payable(devWallet).transfer(ethDev);
}
//Reset accumulated amount
accumulatedForLiquid = remainForLiq;
accumulatedForMarketing = remainForMarketing;
accumulatedForDev = remainForDev;
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingDevLiquidBurnFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingDevLiquidBurnFee(tMarketingDevLiquidBurnFee, sender);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingDevLiquidBurnFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingDevLiquidBurnFee(tMarketingDevLiquidBurnFee, sender);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingDevLiquidBurnFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingDevLiquidBurnFee(tMarketingDevLiquidBurnFee, sender);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingDevLiquidBurnFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingDevLiquidBurnFee(tMarketingDevLiquidBurnFee, sender);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}