Contract Source Code:
File 1 of 1 : BaseToken
// BUILT FOR FREE ON https://vittominacori.github.io/erc20-generator
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20MinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: @openzeppelin/contracts/token/ERC20/ERC20Capped.sol
pragma solidity ^0.6.0;
/**
* @dev Extension of {ERC20} that adds a cap to the supply of tokens.
*/
abstract contract ERC20Capped is ERC20 {
uint256 private _cap;
/**
* @dev Sets the value of the `cap`. This value is immutable, it can only be
* set once during construction.
*/
constructor (uint256 cap) public {
require(cap > 0, "ERC20Capped: cap is 0");
_cap = cap;
}
/**
* @dev Returns the cap on the token's total supply.
*/
function cap() public view returns (uint256) {
return _cap;
}
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - minted tokens must not cause the total supply to go over the cap.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
if (from == address(0)) { // When minting tokens
require(totalSupply().add(amount) <= _cap, "ERC20Capped: cap exceeded");
}
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20Burnable.sol
pragma solidity ^0.6.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
// File: @openzeppelin/contracts/introspection/IERC165.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363.sol
pragma solidity ^0.6.0;
/**
* @title IERC1363 Interface
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Interface for a Payable Token contract as defined in
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1363.md
*/
interface IERC1363 is IERC20, IERC165 {
/*
* Note: the ERC-165 identifier for this interface is 0x4bbee2df.
* 0x4bbee2df ===
* bytes4(keccak256('transferAndCall(address,uint256)')) ^
* bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)'))
*/
/*
* Note: the ERC-165 identifier for this interface is 0xfb9ec8ce.
* 0xfb9ec8ce ===
* bytes4(keccak256('approveAndCall(address,uint256)')) ^
* bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
*/
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param to address The address which you want to transfer to
* @param value uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferAndCall(address to, uint256 value) external returns (bool);
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param to address The address which you want to transfer to
* @param value uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `to`
* @return true unless throwing
*/
function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferFromAndCall(address from, address to, uint256 value) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `to`
* @return true unless throwing
*/
function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param value uint256 The amount of tokens to be spent
*/
function approveAndCall(address spender, uint256 value) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param value uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format, sent in call to `spender`
*/
function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Receiver.sol
pragma solidity ^0.6.0;
/**
* @title IERC1363Receiver Interface
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Interface for any contract that wants to support transferAndCall or transferFromAndCall
* from ERC1363 token contracts as defined in
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1363.md
*/
interface IERC1363Receiver {
/*
* Note: the ERC-165 identifier for this interface is 0x88a7ca5c.
* 0x88a7ca5c === bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))
*/
/**
* @notice Handle the receipt of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
* transfer. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
* @param from address The address which are token transferred from
* @param value uint256 The amount of tokens transferred
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))`
* unless throwing
*/
function onTransferReceived(address operator, address from, uint256 value, bytes calldata data) external returns (bytes4); // solhint-disable-line max-line-length
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Spender.sol
pragma solidity ^0.6.0;
/**
* @title IERC1363Spender Interface
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Interface for any contract that wants to support approveAndCall
* from ERC1363 token contracts as defined in
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1363.md
*/
interface IERC1363Spender {
/*
* Note: the ERC-165 identifier for this interface is 0x7b04a2d0.
* 0x7b04a2d0 === bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))
*/
/**
* @notice Handle the approval of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after an `approve`. This function MAY throw to revert and reject the
* approval. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param owner address The address which called `approveAndCall` function
* @param value uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))`
* unless throwing
*/
function onApprovalReceived(address owner, uint256 value, bytes calldata data) external returns (bytes4);
}
// File: @openzeppelin/contracts/introspection/ERC165Checker.sol
pragma solidity ^0.6.2;
/**
* @dev Library used to query support of an interface declared via {IERC165}.
*
* Note that these functions return the actual result of the query: they do not
* `revert` if an interface is not supported. It is up to the caller to decide
* what to do in these cases.
*/
library ERC165Checker {
// As per the EIP-165 spec, no interface should ever match 0xffffffff
bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Returns true if `account` supports the {IERC165} interface,
*/
function supportsERC165(address account) internal view returns (bool) {
// Any contract that implements ERC165 must explicitly indicate support of
// InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
return _supportsERC165Interface(account, _INTERFACE_ID_ERC165) &&
!_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
}
/**
* @dev Returns true if `account` supports the interface defined by
* `interfaceId`. Support for {IERC165} itself is queried automatically.
*
* See {IERC165-supportsInterface}.
*/
function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
// query support of both ERC165 as per the spec and support of _interfaceId
return supportsERC165(account) &&
_supportsERC165Interface(account, interfaceId);
}
/**
* @dev Returns true if `account` supports all the interfaces defined in
* `interfaceIds`. Support for {IERC165} itself is queried automatically.
*
* Batch-querying can lead to gas savings by skipping repeated checks for
* {IERC165} support.
*
* See {IERC165-supportsInterface}.
*/
function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
// query support of ERC165 itself
if (!supportsERC165(account)) {
return false;
}
// query support of each interface in _interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
if (!_supportsERC165Interface(account, interfaceIds[i])) {
return false;
}
}
// all interfaces supported
return true;
}
/**
* @notice Query if a contract implements an interface, does not check ERC165 support
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return true if the contract at account indicates support of the interface with
* identifier interfaceId, false otherwise
* @dev Assumes that account contains a contract that supports ERC165, otherwise
* the behavior of this method is undefined. This precondition can be checked
* with {supportsERC165}.
* Interface identification is specified in ERC-165.
*/
function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
// success determines whether the staticcall succeeded and result determines
// whether the contract at account indicates support of _interfaceId
(bool success, bool result) = _callERC165SupportsInterface(account, interfaceId);
return (success && result);
}
/**
* @notice Calls the function with selector 0x01ffc9a7 (ERC165) and suppresses throw
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return success true if the STATICCALL succeeded, false otherwise
* @return result true if the STATICCALL succeeded and the contract at account
* indicates support of the interface with identifier interfaceId, false otherwise
*/
function _callERC165SupportsInterface(address account, bytes4 interfaceId)
private
view
returns (bool, bool)
{
bytes memory encodedParams = abi.encodeWithSelector(_INTERFACE_ID_ERC165, interfaceId);
(bool success, bytes memory result) = account.staticcall{ gas: 30000 }(encodedParams);
if (result.length < 32) return (false, false);
return (success, abi.decode(result, (bool)));
}
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: erc-payable-token/contracts/token/ERC1363/ERC1363.sol
pragma solidity ^0.6.0;
/**
* @title ERC1363
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Implementation of an ERC1363 interface
*/
contract ERC1363 is ERC20, IERC1363, ERC165 {
using Address for address;
/*
* Note: the ERC-165 identifier for this interface is 0x4bbee2df.
* 0x4bbee2df ===
* bytes4(keccak256('transferAndCall(address,uint256)')) ^
* bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
* bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)'))
*/
bytes4 internal constant _INTERFACE_ID_ERC1363_TRANSFER = 0x4bbee2df;
/*
* Note: the ERC-165 identifier for this interface is 0xfb9ec8ce.
* 0xfb9ec8ce ===
* bytes4(keccak256('approveAndCall(address,uint256)')) ^
* bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
*/
bytes4 internal constant _INTERFACE_ID_ERC1363_APPROVE = 0xfb9ec8ce;
// Equals to `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC1363Receiver(0).onTransferReceived.selector`
bytes4 private constant _ERC1363_RECEIVED = 0x88a7ca5c;
// Equals to `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))`
// which can be also obtained as `IERC1363Spender(0).onApprovalReceived.selector`
bytes4 private constant _ERC1363_APPROVED = 0x7b04a2d0;
/**
* @param name Name of the token
* @param symbol A symbol to be used as ticker
*/
constructor (
string memory name,
string memory symbol
) public payable ERC20(name, symbol) {
// register the supported interfaces to conform to ERC1363 via ERC165
_registerInterface(_INTERFACE_ID_ERC1363_TRANSFER);
_registerInterface(_INTERFACE_ID_ERC1363_APPROVE);
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param to The address to transfer to.
* @param value The amount to be transferred.
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address to, uint256 value) public override returns (bool) {
return transferAndCall(to, value, "");
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param to The address to transfer to
* @param value The amount to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address to, uint256 value, bytes memory data) public override returns (bool) {
transfer(to, value);
require(_checkAndCallTransfer(_msgSender(), to, value, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param from The address which you want to send tokens from
* @param to The address which you want to transfer to
* @param value The amount of tokens to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(address from, address to, uint256 value) public override returns (bool) {
return transferFromAndCall(from, to, value, "");
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param from The address which you want to send tokens from
* @param to The address which you want to transfer to
* @param value The amount of tokens to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(address from, address to, uint256 value, bytes memory data) public override returns (bool) {
transferFrom(from, to, value);
require(_checkAndCallTransfer(from, to, value, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to
* @param value The amount allowed to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 value) public override returns (bool) {
return approveAndCall(spender, value, "");
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to.
* @param value The amount allowed to be transferred.
* @param data Additional data with no specified format.
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 value, bytes memory data) public override returns (bool) {
approve(spender, value);
require(_checkAndCallApprove(spender, value, data), "ERC1363: _checkAndCallApprove reverts");
return true;
}
/**
* @dev Internal function to invoke `onTransferReceived` on a target address
* The call is not executed if the target address is not a contract
* @param from address Representing the previous owner of the given token value
* @param to address Target address that will receive the tokens
* @param value uint256 The amount mount of tokens to be transferred
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallTransfer(address from, address to, uint256 value, bytes memory data) internal returns (bool) {
if (!to.isContract()) {
return false;
}
bytes4 retval = IERC1363Receiver(to).onTransferReceived(
_msgSender(), from, value, data
);
return (retval == _ERC1363_RECEIVED);
}
/**
* @dev Internal function to invoke `onApprovalReceived` on a target address
* The call is not executed if the target address is not a contract
* @param spender address The address which will spend the funds
* @param value uint256 The amount of tokens to be spent
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallApprove(address spender, uint256 value, bytes memory data) internal returns (bool) {
if (!spender.isContract()) {
return false;
}
bytes4 retval = IERC1363Spender(spender).onApprovalReceived(
_msgSender(), value, data
);
return (retval == _ERC1363_APPROVED);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: eth-token-recover/contracts/TokenRecover.sol
pragma solidity ^0.6.0;
/**
* @title TokenRecover
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Allow to recover any ERC20 sent into the contract for error
*/
contract TokenRecover is Ownable {
/**
* @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/access/AccessControl.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, _msgSender()));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts/access/Roles.sol
pragma solidity ^0.6.0;
contract Roles is AccessControl {
bytes32 public constant MINTER_ROLE = keccak256("MINTER");
bytes32 public constant OPERATOR_ROLE = keccak256("OPERATOR");
constructor () public {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(OPERATOR_ROLE, _msgSender());
}
modifier onlyMinter() {
require(hasRole(MINTER_ROLE, _msgSender()), "Roles: caller does not have the MINTER role");
_;
}
modifier onlyOperator() {
require(hasRole(OPERATOR_ROLE, _msgSender()), "Roles: caller does not have the OPERATOR role");
_;
}
}
// File: contracts/BaseToken.sol
pragma solidity ^0.6.0;
/**
* @title BaseToken
* @author Vittorio Minacori (https://github.com/vittominacori)
* @dev Implementation of the BaseToken
*/
contract BaseToken is ERC20Capped, ERC20Burnable, ERC1363, Roles, TokenRecover {
// indicates if minting is finished
bool private _mintingFinished = false;
// indicates if transfer is enabled
bool private _transferEnabled = false;
string public constant BUILT_ON = "https://vittominacori.github.io/erc20-generator";
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Emitted during transfer enabling
*/
event TransferEnabled();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "BaseToken: minting is finished");
_;
}
/**
* @dev Tokens can be moved only after if transfer enabled or if you are an approved operator.
*/
modifier canTransfer(address from) {
require(
_transferEnabled || hasRole(OPERATOR_ROLE, from),
"BaseToken: transfer is not enabled or from does not have the OPERATOR role"
);
_;
}
/**
* @param name Name of the token
* @param symbol A symbol to be used as ticker
* @param decimals Number of decimals. All the operations are done using the smallest and indivisible token unit
* @param cap Maximum number of tokens mintable
* @param initialSupply Initial token supply
* @param transferEnabled If transfer is enabled on token creation
* @param mintingFinished If minting is finished after token creation
*/
constructor(
string memory name,
string memory symbol,
uint8 decimals,
uint256 cap,
uint256 initialSupply,
bool transferEnabled,
bool mintingFinished
)
public
ERC20Capped(cap)
ERC1363(name, symbol)
{
require(
mintingFinished == false || cap == initialSupply,
"BaseToken: if finish minting, cap must be equal to initialSupply"
);
_setupDecimals(decimals);
if (initialSupply > 0) {
_mint(owner(), initialSupply);
}
if (mintingFinished) {
finishMinting();
}
if (transferEnabled) {
enableTransfer();
}
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() public view returns (bool) {
return _mintingFinished;
}
/**
* @return if transfer is enabled or not.
*/
function transferEnabled() public view returns (bool) {
return _transferEnabled;
}
/**
* @dev Function to mint tokens.
* @param to The address that will receive the minted tokens
* @param value The amount of tokens to mint
*/
function mint(address to, uint256 value) public canMint onlyMinter {
_mint(to, value);
}
/**
* @dev Transfer tokens to a specified address.
* @param to The address to transfer to
* @param value The amount to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transfer(address to, uint256 value) public virtual override(ERC20) canTransfer(_msgSender()) returns (bool) {
return super.transfer(to, value);
}
/**
* @dev Transfer tokens from one address to another.
* @param from The address which you want to send tokens from
* @param to The address which you want to transfer to
* @param value the amount of tokens to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transferFrom(address from, address to, uint256 value) public virtual override(ERC20) canTransfer(from) returns (bool) {
return super.transferFrom(from, to, value);
}
/**
* @dev Function to stop minting new tokens.
*/
function finishMinting() public canMint onlyOwner {
_mintingFinished = true;
emit MintFinished();
}
/**
* @dev Function to enable transfers.
*/
function enableTransfer() public onlyOwner {
_transferEnabled = true;
emit TransferEnabled();
}
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Capped) {
super._beforeTokenTransfer(from, to, amount);
}
}
