Contract Name:
AXYSPaymaster
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```solidity
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
*
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized != type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal onlyInitializing {
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal onlyInitializing {
_paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuardUpgradeable is Initializable {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
function __ReentrancyGuard_init() internal onlyInitializing {
__ReentrancyGuard_init_unchained();
}
function __ReentrancyGuard_init_unchained() internal onlyInitializing {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == _ENTERED;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20PermitUpgradeable {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
import "../extensions/IERC20PermitUpgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20Upgradeable {
using AddressUpgradeable for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20Upgradeable token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20Upgradeable token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20Upgradeable token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20Upgradeable token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20Upgradeable token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20Upgradeable token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20PermitUpgradeable token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20Upgradeable token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && AddressUpgradeable.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import "./interfaces/IAXYSNFT.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
contract AXYSPaymaster is
Initializable,
OwnableUpgradeable,
PausableUpgradeable,
ReentrancyGuardUpgradeable
{
// USDT token instance
IERC20Upgradeable usdtToken;
// Use for USDT token transfer safely
using SafeERC20Upgradeable for IERC20Upgradeable;
// Boolean variables to control specific functionalities
bool public isTransactionFeeAllowed;
// Integers state variables
uint256 public transactionFee;
uint256 public creatorPercentage;
uint256 public custodyWalletPercentage;
// Addresses for admin wallet & different receivers
address public adminWallet;
address public creatorAddress;
address public fixedAmountReceiver;
address public custodyWalletAddress;
address public transactionFeeReceiver;
// Addresses for different contracts
address public axysNftContractAddress;
address public usdtContractAddress;
// Event emitted upon transfer amount
event AmountTransfered(
bool isUSDT,
uint256 totalAmount,
uint256 creatorTotalAmount,
uint256 fixedAmount,
uint256 creatorAmount,
uint256 creatorTransactionFee,
uint256 custodyAmount,
address creatorAddress,
address transactionFeeReceiver,
address fixedAmountReceiver,
address custodyWalletAddress
);
// Event emitted upon when transfer fee send in blockchian native token
event SentTransactionFeeInNativeTokens(
uint256 totalAmount,
uint256 Tranacationfee,
address sender,
address transactionFeeReceiver
);
// Event emitted upon when transfer fee send in USDT
event SentTransactionFeeInUSDT(
uint256 totalAmount,
uint256 Tranacationfee,
address sender,
address transactionFeeReceiver
);
// Modifier to ensure required addresses are not set to zero address
modifier amountReceivers() {
require(
creatorAddress != address(0) &&
fixedAmountReceiver != address(0) &&
custodyWalletAddress != address(0),
"Zero address not allowed"
);
_;
}
// Modifier to restrict access to only the contract owner or admin wallet
modifier onlyOwnerOrAdmin() {
require(
_msgSender() == owner() || _msgSender() == adminWallet,
"Access denied"
);
_;
}
// Modifier to prevent functions from being called with zero address arguments
modifier restrictZeroAddress(address _address) {
require(_address != address(0), "Invalid Address");
_;
}
/**
* @dev Initializes the contract with initial values.
* @param _creatorAddress Address of the creator.
* @param _fixedAmountReceiver Address to receive fixed amounts.
* @param _custodyWalletAddress Address for custody wallet.
* @param _transactionFeeReceiver Address to receive transaction fees.
*/
function initialize(
address _creatorAddress,
address _fixedAmountReceiver,
address _custodyWalletAddress,
address _transactionFeeReceiver,
address _usdtContractAddress
) public initializer {
require(
_creatorAddress != address(0) &&
_fixedAmountReceiver != address(0) &&
_custodyWalletAddress != address(0) &&
_transactionFeeReceiver != address(0) &&
_usdtContractAddress != address(0),
"Zero address not allowed"
);
transactionFee = 5; // 0.5% transaction fee
creatorPercentage = 600; // receive 60 percent amount
custodyWalletPercentage = 400; // receive 40 percent amount
creatorAddress = _creatorAddress;
fixedAmountReceiver = _fixedAmountReceiver;
custodyWalletAddress = _custodyWalletAddress;
transactionFeeReceiver = _transactionFeeReceiver;
usdtContractAddress = _usdtContractAddress;
usdtToken = IERC20Upgradeable(usdtContractAddress);
__Ownable_init();
}
/**
* @dev Sets whether transaction fees are allowed or not.
* @param _isTransactionFeeAllowed Boolean value to allow transaction fees.
*/
function setIsTransactionFeeAllowed(
bool _isTransactionFeeAllowed
) public onlyOwner {
require(
_isTransactionFeeAllowed != isTransactionFeeAllowed,
"Revert with same value"
);
isTransactionFeeAllowed = _isTransactionFeeAllowed;
}
/**
* @dev Sets the address for the USDT contract and initializes the token.
* @param _usdtContractAddress Address of the USDT contract.
*/
function setUsdtContractAddress(
address _usdtContractAddress
) public onlyOwner restrictZeroAddress(_usdtContractAddress) {
usdtContractAddress = _usdtContractAddress;
}
/**
* @dev Sets addresses for fixed amount receiver, creator, and custody wallet.
* @param _fixedAmountReceiver Address to receive fixed amounts.
* @param _creator Address of the creator.
* @param _custodyWallet Address for custody wallet.
*/
function setAmountReceiverAddresses(
address _fixedAmountReceiver,
address _creator,
address _custodyWallet
) public onlyOwner {
require(
_fixedAmountReceiver != address(0) &&
_creator != address(0) &&
_custodyWallet != address(0),
"Invalid Address"
);
creatorAddress = _creator;
custodyWalletAddress = _custodyWallet;
fixedAmountReceiver = _fixedAmountReceiver;
}
/**
* @dev Sets the admin wallet address.
* @param _adminWallet Address of the admin wallet.
*/
function setAdminWallet(
address _adminWallet
) public onlyOwner restrictZeroAddress(_adminWallet) {
adminWallet = _adminWallet;
}
/**
* @dev Sets the percentage amounts for creator and custody wallet.
* @param _creatorPercentage Percentage for the creator.
* @param _custodyWalletPercentage Percentage for the custody wallet.
*/
function setReceiveingAmountPercentage(
uint256 _creatorPercentage,
uint256 _custodyWalletPercentage
) public onlyOwner {
creatorPercentage = _creatorPercentage;
custodyWalletPercentage = _custodyWalletPercentage;
}
/**
* @dev Sets the NFT contract address.
* @param _axysNftContract Address of the NFT contract address.
*/
function setAXYSNftContract(
address _axysNftContract
) public onlyOwner restrictZeroAddress(_axysNftContract) {
axysNftContractAddress = _axysNftContract;
}
/**
* @notice Sets the transaction fee percentage.
* @param _transactionFee Transaction fee percentage.
*/
function setTransactionFee(uint256 _transactionFee) public onlyOwner {
transactionFee = _transactionFee;
}
/**
* @notice Sets the address to receive transaction fees.
* @param _transactionFeeReceiver Address to receive transaction fees.
*/
function setTransactionFeeReceiver(
address _transactionFeeReceiver
) public onlyOwner restrictZeroAddress(_transactionFeeReceiver) {
transactionFeeReceiver = _transactionFeeReceiver;
}
/**
* @notice Handles minting of NFTs with ETH, including fee calculation and transfer.
* @param _to Address to receive the minted NFT.
* @param _randomString Random string for NFT mintng.
* @param _uri URI for NFT metadata.
* @param _price Price in ETH for the NFT.
* @param _fixedAmount Fixed amount to be deducted.
*/
function lazyMintWithNativeTokens(
address _to,
bytes32 _randomString,
string memory _uri,
uint256 _price,
uint256 _fixedAmount
) public payable whenNotPaused amountReceivers {
uint256 fee = 0;
if (isTransactionFeeAllowed)
fee = paymasterFeeCalculator(_price, transactionFee);
require(msg.value == _price + fee, "Invalid price");
_lazyMint(_to, _randomString, _uri, _price, _fixedAmount, fee, false);
emit SentTransactionFeeInNativeTokens(
msg.value,
fee,
_msgSender(),
transactionFeeReceiver
);
}
/**
* @notice Handles minting of NFTs with USDT, including fee calculation and transfer.
* @param _to Address to receive the minted NFT.
* @param _randomString Random string for NFT minting.
* @param _uri URI for NFT metadata.
* @param _price Price in USDT for the NFT.
* @param _fixedAmount Fixed amount to be deducted.
*/
function lazyMintWithUSDT(
address _to,
bytes32 _randomString,
string memory _uri,
uint256 _price,
uint256 _fixedAmount,
uint256 _totalPrice
) public payable whenNotPaused amountReceivers {
uint256 fee = 0;
bool _isUSDT = true;
require(_fixedAmount < _price, 'Invalid fixed amount');
if (isTransactionFeeAllowed)
fee = paymasterFeeCalculator(_price, transactionFee);
require(_totalPrice == _price + fee, "Invalid USDT price");
require(
usdtToken.balanceOf(_msgSender()) >= _totalPrice / 10 ** 12,
"Insufficient USDT balance"
);
_lazyMint(_to, _randomString, _uri, _price, _fixedAmount, fee, _isUSDT);
emit SentTransactionFeeInUSDT(
_totalPrice,
fee,
_msgSender(),
transactionFeeReceiver
);
}
/**
* @notice mints an NFT in special scenario when free minting allowed by owner.
* @param _to Address to receive the pre-minted NFT.
* @param _randomString Random string for NFT metadata.
* @param _uri URI for NFT metadata.
*/
function preMintNft(
address _to,
bytes32 _randomString,
string memory _uri
) public whenNotPaused {
IAXYSNFT(axysNftContractAddress).preMintNft(_to, _randomString, _uri);
}
/**
* @notice Mints an NFT by admins.
* @param _to Address to receive the minted NFT.
* @param _randomString Random string for NFT metadata.
* @param _uri URI for NFT metadata.
*/
function mintNftByAdmins(
address _to,
bytes32 _randomString,
string memory _uri
) public onlyOwnerOrAdmin {
IAXYSNFT(axysNftContractAddress).mintNftByAdmins(
_to,
_randomString,
_uri
);
}
/**
* @notice Internal function for minting NFTs, fee calculation, and transfers.
* @param _isUSDT Boolean indicating whether USDT is used.
* @param _to Address to receive the minted NFT.
* @param _randomString Random string for NFT metadata.
* @param _uri URI for NFT metadata.
* @param _price Price in ETH or USDT for the NFT.
* @param _fixedAmount Fixed amount to be deducted.
* @param _fee Fee amount for the transaction.
*/
function _lazyMint(
address _to,
bytes32 _randomString,
string memory _uri,
uint256 _price,
uint256 _fixedAmount,
uint256 _fee,
bool _isUSDT
) internal whenNotPaused amountReceivers {
IAXYSNFT(axysNftContractAddress).lazyMint(
_to,
_randomString,
_uri,
_price
);
if (_price != 0) _transferAmount(_isUSDT, _price, _fixedAmount, _fee);
}
/**
* @notice Internal function for transferring amounts based on the payment method.
* @param _isUSDT Boolean indicating whether USDT is used.
* @param _price Price in ETH or USDT for the NFT.
* @param _fixedAmount Fixed amount to be deducted.
* @param _fee Fee amount for the transaction.
*/
function _transferAmount(
bool _isUSDT,
uint256 _price,
uint256 _fixedAmount,
uint256 _fee
) internal whenNotPaused nonReentrant {
require(_fixedAmount >= 0, "Invalid discount value");
uint256 _updatedPrice = _price - _fixedAmount;
uint256 _creatorTotalPrice = paymasterFeeCalculator(
_updatedPrice,
creatorPercentage
);
uint256 _creatorTransactionFee = paymasterFeeCalculator(
_creatorTotalPrice,
transactionFee
);
uint256 _creatorPrice = _creatorTotalPrice - _creatorTransactionFee;
uint256 _custodyWalletPrice = paymasterFeeCalculator(
_updatedPrice,
custodyWalletPercentage
);
if (_fixedAmount != 0)
paymasterFeeTransfer(_isUSDT, _fixedAmount, fixedAmountReceiver);
if (_fee != 0)
paymasterFeeTransfer(_isUSDT, _fee, transactionFeeReceiver);
paymasterFeeTransfer(_isUSDT, _creatorPrice, creatorAddress);
paymasterFeeTransfer(
_isUSDT,
_custodyWalletPrice,
custodyWalletAddress
);
paymasterFeeTransfer(
_isUSDT,
_creatorTransactionFee,
transactionFeeReceiver
);
emit AmountTransfered(
_isUSDT,
_price,
_creatorTotalPrice,
_fixedAmount,
_creatorPrice,
_creatorTransactionFee,
_custodyWalletPrice,
creatorAddress,
transactionFeeReceiver,
fixedAmountReceiver,
custodyWalletAddress
);
}
/**
* @notice Internal function to calculate the transaction fee.
* @param _percentage Percentage to calculate the fee.
* @param _amount Amount to apply the percentage on.
*/
function paymasterFeeCalculator(
uint256 _percentage,
uint256 _amount
) internal pure returns (uint256) {
uint256 fee = (_amount * _percentage) / 1000;
return fee;
}
/**
* @notice Internal function to transfer fees based on the payment method.
* @param isUSDT Boolean indicating whether USDT is used.
* @param _amount Amount to transfer.
* @param _receiver Address to receive the transferred amount.
*/
function paymasterFeeTransfer(
bool isUSDT,
uint256 _amount,
address _receiver
) internal {
if (!isUSDT)
payable(_receiver).transfer(_amount);
else
IERC20Upgradeable(usdtContractAddress).safeTransferFrom(
_msgSender(),
_receiver,
_amount
);
}
/**
* @notice Internal function to get the usdt allowance for paymaster contract.
*/
function getAllowance() internal view returns (uint256) {
return usdtToken.allowance(msg.sender, address(this));
}
/**
* @notice Calculate the fee and amount and return the both value.
* @param _percentage Percentage to calculate the fee.
* @param _price Amount to apply the percentage on
*/
function amountCalculator(
uint256 _percentage,
uint256 _price
) public pure returns (uint256, uint256, uint256) {
uint256 fee = (_price * _percentage) / 1000;
uint256 totalPrice = _price + fee;
return (totalPrice, _price, fee);
}
/**
* @notice Pauses certain functionalities of the contract.
*/
function pause() public onlyOwner {
_pause();
}
/**
* @notice Unpauses certain functionalities of the contract.
*/
function unpause() public onlyOwner {
_unpause();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IAXYSNFT {
function lazyMint(
address _to,
bytes32 _randomString,
string memory _uri,
uint256 _price
) external;
function preMintNft(
address _to,
bytes32 _randomString,
string memory _uri
) external;
function mintNftByAdmins(
address _to,
bytes32 _randomString,
string memory _uri
) external;
}
