Contract Name:
CryptoRealEstate
Contract Source Code:
File 1 of 1 : CryptoRealEstate
// File: contracts/CRE/interfaces/IUniswapFactory.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.8.19;
interface IUniswapFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
// File: contracts/CRE/interfaces/IUniswapRouter.sol
pragma solidity 0.8.19;
interface IUniswapRouter {
function factory() external pure returns (address);
// solhint-disable-next-line func-name-mixedcase
function WETH() external pure returns (address);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(address from, address to, uint256 amount) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// File: contracts/CRE/CryptoRealEstate.sol
pragma solidity 0.8.19;
/**
* @title CryptoRealEstate
* @dev ERC20 token contract representing CryptoRealEstate.
*/
contract CryptoRealEstate is ERC20, Ownable {
using Address for address payable;
using SafeERC20 for IERC20;
uint256 private constant INITIAL_TOTAL_SUPPLY = 100000000 * 10 ** 18;
IUniswapRouter private immutable uniswapRouter;
address private immutable weth;
address public immutable dex;
bool private tradingOpened;
bool private inSwap = false;
address public marketingAddress;
uint8 public buyTaxFeePercent;
uint8 public transferTaxFeePercent;
uint8 public sellTaxFeePercent;
uint256 private sThreshold = (INITIAL_TOTAL_SUPPLY * 3) / 10000; // 0.03% of initial total supply
mapping(address => bool) public whiteList;
/**
* @dev Emitted when the token contract is initialized.
* @param name The name of the token.
* @param symbol The symbol of the token.
* @param owner The address of the contract owner.
* @param marketingAddress The address for marketing purposes.
* @param initialTokenReceiver The address of the initial token receiver.
* @param uniswapRouter The address of the UniswapSwap router.
* @param buyTaxFeePercent The buy tax fee percentage.
* @param transferTaxFeePercent The transfer tax fee percentage.
* @param sellTaxFeePercent The sell tax fee percentage.
*/
event TokenInitialized(
string name,
string symbol,
address owner,
address marketingAddress,
address initialTokenReceiver,
IUniswapRouter uniswapRouter,
uint256 buyTaxFeePercent,
uint256 transferTaxFeePercent,
uint256 sellTaxFeePercent
);
/**
* @dev Emitted when the swap amount is changed.
* @param oldAmount The old swap amount.
* @param newAmount The new swap amount.
*/
event SwapAmountChanged(uint256 oldAmount, uint256 newAmount);
/**
* @dev Emitted when an address is added to the whitelist.
* @param _address The address added to the whitelist.
*/
event AddedToWhitelist(address _address);
/**
* @dev Emitted when an address is removed from the whitelist.
* @param _address The address removed from the whitelist.
*/
event RemovedFromWhitelist(address _address);
/**
* @dev Emitted when the buy tax fee percentage is changed.
* @param oldPercent The old buy tax fee percentage.
* @param newPercent The new buy tax fee percentage.
*/
event BuyTaxFeePercentChanged(uint256 oldPercent, uint256 newPercent);
/**
* @dev Emitted when the transfer tax fee percentage is changed.
* @param oldPercent The old transfer tax fee percentage.
* @param newPercent The new transfer tax fee percentage.
*/
event TransferTaxFeePercentChanged(uint256 oldPercent, uint256 newPercent);
/**
* @dev Emitted when the sell tax fee percentage is changed.
* @param oldPercent The old sell tax fee percentage.
* @param newPercent The new sell tax fee percentage.
*/
event SellTaxFeePercentChanged(uint256 oldPercent, uint256 newPercent);
/**
* @dev Emitted when the treasury address is changed.
* @param oldAddress The old treasury address.
* @param newAddress The new treasury address.
*/
event TreasuryChanged(address oldAddress, address newAddress);
/**
* @dev Emitted when trading is opened.
* @param timestamp The timestamp when trading was opened.
*/
event TradingOpened(uint256 timestamp);
/**
* @dev Emitted when tokens are withdrawn from the contract.
* @param to The address where the tokens are withdrawn to.
* @param tokenAddress The address of the token being withdrawn.
* @param amount The amount of tokens being withdrawn.
*/
event WithdrawedToken(address to, address tokenAddress, uint256 amount);
/**
* @dev Emitted when Eth is withdrawn from the contract.
* @param to The address where Eth is withdrawn to.
* @param amount The amount of Eth being withdrawn.
*/
event WithdrawedEth(address to, uint256 amount);
/**
* @dev Modifier to lock the swap functionality during certain operations.
*/
modifier lockTheSwap() {
inSwap = true;
_;
inSwap = false;
}
constructor(
string memory _name,
string memory _symbol,
address _owner,
address _marketingAddress,
address _initialTokenReceiver,
IUniswapRouter _uniswapRouter,
uint8 _buyTaxFeePercent,
uint8 _transferTaxFeePercent,
uint8 _sellTaxFeePercent
) ERC20(_name, _symbol) {
require(bytes(_name).length > 0, "Token name must not be empty");
require(bytes(_symbol).length > 0, "Token symbol must not be empty");
require(_owner != address(0), "Invalid owner address");
require(_marketingAddress != address(0), "Invalid treasury address");
require(_initialTokenReceiver != address(0), "Invalid initial token receiver address");
require(address(_uniswapRouter) != address(0), "Invalid uniswapRouter address");
require(_buyTaxFeePercent <= 3, "Unpossible fee amount");
require(_transferTaxFeePercent <= 3, "Unpossible fee amount");
require(_sellTaxFeePercent <= 9, "Unpossible fee amount");
_mint(_initialTokenReceiver, INITIAL_TOTAL_SUPPLY);
_transferOwnership(_owner);
marketingAddress = _marketingAddress;
uniswapRouter = _uniswapRouter;
buyTaxFeePercent = _buyTaxFeePercent;
transferTaxFeePercent = _transferTaxFeePercent;
sellTaxFeePercent = _sellTaxFeePercent;
address _weth = _uniswapRouter.WETH();
weth = _weth;
address pair = IUniswapFactory(_uniswapRouter.factory()).createPair(address(this), _weth);
dex = pair;
_approve(address(this), address(_uniswapRouter), type(uint256).max);
whiteList[address(this)] = true;
emit TokenInitialized(
_name,
_symbol,
_owner,
_marketingAddress,
_initialTokenReceiver,
_uniswapRouter,
_buyTaxFeePercent,
_transferTaxFeePercent,
_sellTaxFeePercent
);
}
receive() external payable {}
/**
* @dev Withdraws the Eth balance from the contract.
*/
function withdrawEth() external onlyOwner {
uint256 amount = address(this).balance;
address payable to = payable(msg.sender);
to.sendValue(amount);
emit WithdrawedEth(to, amount);
}
/**
* @dev Withdraws tokens from the contract, excluded contract's own token.
* @param tokenAddress The address of the token being withdrawn.
* @param amount The amount of tokens being withdrawn.
*/
function withdrawToken(address tokenAddress, uint256 amount) external onlyOwner {
require(tokenAddress != address(this), "Cannot withdraw contract's own token");
IERC20 token = IERC20(tokenAddress);
require(token.balanceOf(address(this)) >= amount, "Insufficient balance");
token.safeTransfer(msg.sender, amount);
emit WithdrawedToken(msg.sender, tokenAddress, amount);
}
/**
* @dev Changes the swap amount threshold for fee distribution.
* @param _newThreshold The new swap amount threshold, represented as a percentage of the initial total supply.
The value should be in the range of 0.005% to 0.03% (300 = 0.03%).
* @notice This function allows the contract owner to adjust the swap amount threshold,
which determines when fees are distributed and tokens are swapped for ETH.
The threshold is specified as a percentage of the initial total supply.
The provided `_newThreshold` value is multiplied by 10^20 to fit the format: 300 = 0.03%.
The function checks if the new threshold is within the valid range and updates the `sThreshold` variable.
* @dev Requirements:
The caller must be the contract owner.
The new threshold value must be within the valid range of 0.005% to 0.03% of the initial total supply.
* @param _newThreshold The new swap amount threshold, represented as a percentage of the initial total supply.
*/
function changeSwapAmount(uint256 _newThreshold) external onlyOwner {
_newThreshold = _newThreshold * 10 ** 20;
require(
_newThreshold <= (INITIAL_TOTAL_SUPPLY * 3) / 10000 &&
_newThreshold >= (INITIAL_TOTAL_SUPPLY * 5) / 100000,
"Out of range: 0.005-0.03% of initial total supply"
);
uint256 oldAmount = sThreshold;
sThreshold = _newThreshold;
emit SwapAmountChanged(oldAmount, _newThreshold);
}
/**
* @dev Adds an address to the whitelist.
* @param _address The address to be added to the whitelist.
*/
function addToWhitelist(address _address) external onlyOwner {
whiteList[_address] = true;
emit AddedToWhitelist(_address);
}
/**
* @dev Removes an address from the whitelist.
* @param _address The address to be removed from the whitelist.
*/
function removeFromWhitelist(address _address) external onlyOwner {
whiteList[_address] = false;
emit RemovedFromWhitelist(_address);
}
/**
* @dev Changes the buy tax fee percentage.
* @param _percent The new buy tax fee percentage.
*/
function changeBuyTaxFeePercent(uint8 _percent) external onlyOwner {
require(_percent <= 3, "Not above 3% for buy tax");
uint256 oldPercent = buyTaxFeePercent;
buyTaxFeePercent = _percent;
emit BuyTaxFeePercentChanged(oldPercent, _percent);
}
/**
* @dev Changes the transfer tax fee percentage.
* @param _percent The new transfer tax fee percentage.
*/
function changeTransferTaxFeePercent(uint8 _percent) external onlyOwner {
require(_percent <= 3, "Not above 3% for transfer tax");
uint256 oldPercent = transferTaxFeePercent;
transferTaxFeePercent = _percent;
emit TransferTaxFeePercentChanged(oldPercent, _percent);
}
/**
* @dev Changes the sell tax fee percentage.
* @param _percent The new sell tax fee percentage.
*/
function changeSellTaxFeePercent(uint8 _percent) external onlyOwner {
require(_percent <= 9, "Not above 9% for sell tax");
uint256 oldPercent = sellTaxFeePercent;
sellTaxFeePercent = _percent;
emit SellTaxFeePercentChanged(oldPercent, _percent);
}
/**
* @dev Sets the treasury address for marketing purposes.
* @param _newMarketingAddress The new treasury address.
*/
function setTreasury(address _newMarketingAddress) external onlyOwner {
require(_newMarketingAddress != address(0), "Invalid treasury address");
address oldAddress = marketingAddress;
marketingAddress = _newMarketingAddress;
emit TreasuryChanged(oldAddress, _newMarketingAddress);
}
/**
* @dev Opens trading, allowing trading of the token.
*/
function openTrading() external onlyOwner {
tradingOpened = true;
emit TradingOpened(block.timestamp);
}
/**
* @dev Reverts the ownership transfer.
* @param newOwner The address to which the ownership should have been transferred.
* @dev Reverts the transaction with an error message.
*/
function transferOwnership(address newOwner) public override onlyOwner {
revert("Ownership transfer is disabled");
}
/**
* @dev Modifies the transfer function to apply taxes and burn fees.
* @param _from The address from which tokens are transferred.
* @param _to The address to which tokens are transferred.
* @param _amount The amount of tokens being transferred.
*/
function _transfer(address _from, address _to, uint256 _amount) internal override {
(uint256 _amtWithoutFee, uint256 _feeAmt) = _calcFee(_from, _to, _amount);
if (_feeAmt == 0 || whiteList[_from] || whiteList[_to]) {
super._transfer(_from, _to, _amount);
return;
}
if (_to == dex) {
require(tradingOpened, "The trading is not open yet");
if (!inSwap) {
uint256 bal = balanceOf(address(this));
if (bal >= sThreshold) {
_distributeFee();
}
super._transfer(_from, _to, _amtWithoutFee);
super._transfer(_from, address(this), _feeAmt);
_burn(address(this), _feeAmt / 2);
} else {
super._transfer(_from, _to, _amount);
}
} else if (_from == dex) {
require(tradingOpened, "The trading is not open yet");
super._transfer(_from, _to, _amtWithoutFee);
_burn(_from, _feeAmt);
} else {
super._transfer(_from, _to, _amtWithoutFee);
_burn(_from, _feeAmt);
}
}
/**
* @dev Distributes the fee by swapping tokens for ETH and sending it to the marketing address.
*/
function _distributeFee() internal lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = weth;
uniswapRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
balanceOf(address(this)),
0,
path,
marketingAddress,
block.timestamp
);
}
/**
* @dev Calculates the fee amount to be deducted from the transfer amount.
* @param _from The address from which tokens are transferred.
* @param _to The address to which tokens are transferred.
* @param _amount The amount of tokens being transferred.
* @return _amtWithoutFee The transfer amount without the fee.
* @return _feeAmt The fee amount to be deducted.
*/
function _calcFee(
address _from,
address _to,
uint256 _amount
) internal view returns (uint256 _amtWithoutFee, uint256 _feeAmt) {
uint256 _feePercent;
if (_from == dex) {
_feePercent = buyTaxFeePercent;
} else if (_to == dex) {
_feePercent = sellTaxFeePercent;
} else {
_feePercent = transferTaxFeePercent;
}
_feeAmt = (_amount * _feePercent) / 100;
_amtWithoutFee = _amount - _feeAmt;
}
}