Contract Name:
FloatMintingCeremonyZapInV1
Contract Source Code:
// ███████╗░█████╗░██████╗░██████╗░███████╗██████╗░░░░███████╗██╗
// ╚════██║██╔══██╗██╔══██╗██╔══██╗██╔════╝██╔══██╗░░░██╔════╝██║
// ░░███╔═╝███████║██████╔╝██████╔╝█████╗░░██████╔╝░░░█████╗░░██║
// ██╔══╝░░██╔══██║██╔═══╝░██╔═══╝░██╔══╝░░██╔══██╗░░░██╔══╝░░██║
// ███████╗██║░░██║██║░░░░░██║░░░░░███████╗██║░░██║██╗██║░░░░░██║
// ╚══════╝╚═╝░░╚═╝╚═╝░░░░░╚═╝░░░░░╚══════╝╚═╝░░╚═╝╚═╝╚═╝░░░░░╚═╝
// Copyright (C) 2021 zapper
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
///@author Zapper
// SPDX-License-Identifier: GPLv2
// Changes:
// - Uses msg.sender / removes the transfer from the zap contract.
// - Uses IMintingCeremony over IVault
pragma solidity =0.7.6;
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../funds/interfaces/IMintingCeremony.sol";
import "../external-lib/zapper/ZapInBaseV2.sol";
contract FloatMintingCeremonyZapInV1 is ZapInBaseV2 {
using SafeMath for uint256;
// calldata only accepted for approved zap contracts
mapping(address => bool) public approvedTargets;
event zapIn(address sender, address pool, uint256 tokensRec);
constructor(uint256 _goodwill, uint256 _affiliateSplit)
ZapBaseV1(_goodwill, _affiliateSplit)
{}
/**
@notice This function commits to the Float Minting Ceremony with ETH or ERC20 tokens
@param fromToken The token used for entry (address(0) if ether)
@param amountIn The amount of fromToken to invest
@param ceremony Float Protocol: Minting Ceremony address
@param minFloatTokens The minimum acceptable quantity Float tokens to receive. Reverts otherwise
@param intermediateToken Token to swap fromToken to before entering ceremony
@param swapTarget Excecution target for the swap or zap
@param swapData DEX or Zap data
@param affiliate Affiliate address
@return tokensReceived - Quantity of FLOAT that will be received
*/
function ZapIn(
address fromToken,
uint256 amountIn,
address ceremony,
uint256 minFloatTokens,
address intermediateToken,
address swapTarget,
bytes calldata swapData,
address affiliate,
bool shouldSellEntireBalance
) external payable stopInEmergency returns (uint256 tokensReceived) {
require(
approvedTargets[swapTarget] || swapTarget == address(0),
"Target not Authorized"
);
// get incoming tokens
uint256 toInvest =
_pullTokens(
fromToken,
amountIn,
affiliate,
true,
shouldSellEntireBalance
);
// get intermediate token
uint256 intermediateAmt =
_fillQuote(fromToken, intermediateToken, toInvest, swapTarget, swapData);
// Deposit to Minting Ceremony
tokensReceived = _ceremonyCommit(intermediateAmt, ceremony, minFloatTokens);
}
function _ceremonyCommit(
uint256 amount,
address toCeremony,
uint256 minTokensRec
) internal returns (uint256 tokensReceived) {
address underlyingVaultToken = IMintingCeremony(toCeremony).underlying();
_approveToken(underlyingVaultToken, toCeremony);
uint256 initialBal = IERC20(toCeremony).balanceOf(msg.sender);
IMintingCeremony(toCeremony).commit(msg.sender, amount, minTokensRec);
tokensReceived = IERC20(toCeremony).balanceOf(msg.sender).sub(initialBal);
require(tokensReceived >= minTokensRec, "Err: High Slippage");
// Note that tokens are gifted directly, so we don't transfer from vault.
// IERC20(toCeremony).safeTransfer(msg.sender, tokensReceived);
emit zapIn(msg.sender, toCeremony, tokensReceived);
}
function _fillQuote(
address _fromTokenAddress,
address toToken,
uint256 _amount,
address _swapTarget,
bytes memory swapCallData
) internal returns (uint256 amtBought) {
uint256 valueToSend;
if (_fromTokenAddress == toToken) {
return _amount;
}
if (_fromTokenAddress == address(0)) {
valueToSend = _amount;
} else {
_approveToken(_fromTokenAddress, _swapTarget);
}
uint256 iniBal = _getBalance(toToken);
(bool success, ) = _swapTarget.call{value: valueToSend}(swapCallData);
require(success, "Error Swapping Tokens 1");
uint256 finalBal = _getBalance(toToken);
amtBought = finalBal.sub(iniBal);
}
function setApprovedTargets(
address[] calldata targets,
bool[] calldata isApproved
) external onlyOwner {
require(targets.length == isApproved.length, "Invalid Input length");
for (uint256 i = 0; i < targets.length; i++) {
approvedTargets[targets[i]] = isApproved[i];
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;
/**
* @title Minting Ceremony
*/
interface IMintingCeremony {
function allowance(address account)
external
view
returns (uint256 remainingAllowance);
function underlying() external view returns (address);
function commit(
address recipient,
uint256 underlyingIn,
uint256 floatOutMin
) external returns (uint256 floatOut);
function mint() external;
}
// ███████╗░█████╗░██████╗░██████╗░███████╗██████╗░░░░███████╗██╗
// ╚════██║██╔══██╗██╔══██╗██╔══██╗██╔════╝██╔══██╗░░░██╔════╝██║
// ░░███╔═╝███████║██████╔╝██████╔╝█████╗░░██████╔╝░░░█████╗░░██║
// ██╔══╝░░██╔══██║██╔═══╝░██╔═══╝░██╔══╝░░██╔══██╗░░░██╔══╝░░██║
// ███████╗██║░░██║██║░░░░░██║░░░░░███████╗██║░░██║██╗██║░░░░░██║
// ╚══════╝╚═╝░░╚═╝╚═╝░░░░░╚═╝░░░░░╚══════╝╚═╝░░╚═╝╚═╝╚═╝░░░░░╚═╝
// Copyright (C) 2021 zapper
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
///@author Zapper
// SPDX-License-Identifier: GPLv2
// Changes:
// - Conversion to 0.7.6
// - abstract type
// - library imports throughout
pragma solidity ^0.7.6;
import "./ZapBaseV1.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
abstract contract ZapInBaseV2 is ZapBaseV1 {
using SafeMath for uint256;
using SafeERC20 for IERC20;
function _pullTokens(
address token,
uint256 amount,
address affiliate,
bool enableGoodwill,
bool shouldSellEntireBalance
) internal returns (uint256 value) {
uint256 totalGoodwillPortion;
if (token == address(0)) {
require(msg.value > 0, "No eth sent");
// subtract goodwill
totalGoodwillPortion = _subtractGoodwill(
ETHAddress,
msg.value,
affiliate,
enableGoodwill
);
return msg.value.sub(totalGoodwillPortion);
}
require(amount > 0, "Invalid token amount");
require(msg.value == 0, "Eth sent with token");
//transfer token
if (shouldSellEntireBalance) {
require(
Address.isContract(msg.sender),
"ERR: shouldSellEntireBalance is true for EOA"
);
amount = IERC20(token).allowance(msg.sender, address(this));
}
IERC20(token).safeTransferFrom(msg.sender, address(this), amount);
// subtract goodwill
totalGoodwillPortion = _subtractGoodwill(
token,
amount,
affiliate,
enableGoodwill
);
return amount.sub(totalGoodwillPortion);
}
function _subtractGoodwill(
address token,
uint256 amount,
address affiliate,
bool enableGoodwill
) internal returns (uint256 totalGoodwillPortion) {
bool whitelisted = feeWhitelist[msg.sender];
if (enableGoodwill && !whitelisted && goodwill > 0) {
totalGoodwillPortion = SafeMath.div(
SafeMath.mul(amount, goodwill),
10000
);
if (affiliates[affiliate]) {
if (token == address(0)) {
token = ETHAddress;
}
uint256 affiliatePortion =
totalGoodwillPortion.mul(affiliateSplit).div(100);
affiliateBalance[affiliate][token] = affiliateBalance[affiliate][token]
.add(affiliatePortion);
totalAffiliateBalance[token] = totalAffiliateBalance[token].add(
affiliatePortion
);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// ███████╗░█████╗░██████╗░██████╗░███████╗██████╗░░░░███████╗██╗
// ╚════██║██╔══██╗██╔══██╗██╔══██╗██╔════╝██╔══██╗░░░██╔════╝██║
// ░░███╔═╝███████║██████╔╝██████╔╝█████╗░░██████╔╝░░░█████╗░░██║
// ██╔══╝░░██╔══██║██╔═══╝░██╔═══╝░██╔══╝░░██╔══██╗░░░██╔══╝░░██║
// ███████╗██║░░██║██║░░░░░██║░░░░░███████╗██║░░██║██╗██║░░░░░██║
// ╚══════╝╚═╝░░╚═╝╚═╝░░░░░╚═╝░░░░░╚══════╝╚═╝░░╚═╝╚═╝╚═╝░░░░░╚═╝
// Copyright (C) 2021 zapper
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
///@author Zapper
// SPDX-License-Identifier: GPLv2
// Changes:
// - Conversion to 0.7.6
// - library imports throughout
// - remove revert fallback as now default
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
pragma solidity ^0.7.6;
contract ZapBaseV1 is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
bool public stopped = false;
// if true, goodwill is not deducted
mapping(address => bool) public feeWhitelist;
uint256 public goodwill;
// % share of goodwill (0-100 %)
uint256 affiliateSplit;
// restrict affiliates
mapping(address => bool) public affiliates;
// affiliate => token => amount
mapping(address => mapping(address => uint256)) public affiliateBalance;
// token => amount
mapping(address => uint256) public totalAffiliateBalance;
address internal constant ETHAddress =
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
constructor(uint256 _goodwill, uint256 _affiliateSplit) {
goodwill = _goodwill;
affiliateSplit = _affiliateSplit;
}
// circuit breaker modifiers
modifier stopInEmergency {
if (stopped) {
revert("Temporarily Paused");
} else {
_;
}
}
function _getBalance(address token) internal view returns (uint256 balance) {
if (token == address(0)) {
balance = address(this).balance;
} else {
balance = IERC20(token).balanceOf(address(this));
}
}
function _approveToken(address token, address spender) internal {
IERC20 _token = IERC20(token);
if (_token.allowance(address(this), spender) > 0) return;
else {
_token.safeApprove(spender, uint256(-1));
}
}
function _approveToken(
address token,
address spender,
uint256 amount
) internal {
IERC20 _token = IERC20(token);
_token.safeApprove(spender, 0);
_token.safeApprove(spender, amount);
}
// - to Pause the contract
function toggleContractActive() public onlyOwner {
stopped = !stopped;
}
function set_feeWhitelist(address zapAddress, bool status)
external
onlyOwner
{
feeWhitelist[zapAddress] = status;
}
function set_new_goodwill(uint256 _new_goodwill) public onlyOwner {
require(
_new_goodwill >= 0 && _new_goodwill <= 100,
"GoodWill Value not allowed"
);
goodwill = _new_goodwill;
}
function set_new_affiliateSplit(uint256 _new_affiliateSplit)
external
onlyOwner
{
require(_new_affiliateSplit <= 100, "Affiliate Split Value not allowed");
affiliateSplit = _new_affiliateSplit;
}
function set_affiliate(address _affiliate, bool _status) external onlyOwner {
affiliates[_affiliate] = _status;
}
///@notice Withdraw goodwill share, retaining affilliate share
function withdrawTokens(address[] calldata tokens) external onlyOwner {
for (uint256 i = 0; i < tokens.length; i++) {
uint256 qty;
if (tokens[i] == ETHAddress) {
qty = address(this).balance.sub(totalAffiliateBalance[tokens[i]]);
Address.sendValue(payable(owner()), qty);
} else {
qty = IERC20(tokens[i]).balanceOf(address(this)).sub(
totalAffiliateBalance[tokens[i]]
);
IERC20(tokens[i]).safeTransfer(owner(), qty);
}
}
}
///@notice Withdraw affilliate share, retaining goodwill share
function affilliateWithdraw(address[] calldata tokens) external {
uint256 tokenBal;
for (uint256 i = 0; i < tokens.length; i++) {
tokenBal = affiliateBalance[msg.sender][tokens[i]];
affiliateBalance[msg.sender][tokens[i]] = 0;
totalAffiliateBalance[tokens[i]] = totalAffiliateBalance[tokens[i]].sub(
tokenBal
);
if (tokens[i] == ETHAddress) {
Address.sendValue(msg.sender, tokenBal);
} else {
IERC20(tokens[i]).safeTransfer(msg.sender, tokenBal);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}