Contract Source Code:
File 1 of 1 : Controller
// SPDX-License-Identifier: MIT
pragma solidity 0.5.17;
// Part: IConverter
interface IConverter {
function convert(address) external returns (uint256);
}
// Part: IOneSplitAudit
interface IOneSplitAudit {
function swap(
address fromToken,
address destToken,
uint256 amount,
uint256 minReturn,
uint256[] calldata distribution,
uint256 flags
) external payable returns (uint256 returnAmount);
function getExpectedReturn(
address fromToken,
address destToken,
uint256 amount,
uint256 parts,
uint256 flags // See constants in IOneSplit.sol
)
external
view
returns (uint256 returnAmount, uint256[] memory distribution);
}
// Part: IStrategy
interface IStrategy {
function want() external view returns (address);
function deposit() external;
// NOTE: must exclude any tokens used in the yield
// Controller role - withdraw should return to Controller
function withdraw(address) external;
// Controller | Vault role - withdraw should always return to Vault
function withdraw(uint256) external;
function skim() external;
// Controller | Vault role - withdraw should always return to Vault
function withdrawAll() external returns (uint256);
function balanceOf() external view returns (uint256);
}
// Part: OpenZeppelin/[email protected]/Address
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// Part: OpenZeppelin/[email protected]/IERC20
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Part: OpenZeppelin/[email protected]/SafeMath
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// Part: OpenZeppelin/[email protected]/SafeERC20
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: Controller.sol
contract Controller {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint256;
address public governance;
address public strategist;
address public onesplit;
address public rewards;
mapping(address => address) public vaults;
mapping(address => address) public strategies;
mapping(address => mapping(address => address)) public converters;
mapping(address => mapping(address => bool)) public approvedStrategies;
uint256 public split = 500;
uint256 public constant max = 10000;
constructor(address _rewards) public {
governance = msg.sender;
strategist = msg.sender;
onesplit = address(0x50FDA034C0Ce7a8f7EFDAebDA7Aa7cA21CC1267e);
rewards = _rewards;
}
function setRewards(address _rewards) public {
require(msg.sender == governance, "!governance");
rewards = _rewards;
}
function setStrategist(address _strategist) public {
require(msg.sender == governance, "!governance");
strategist = _strategist;
}
function setSplit(uint256 _split) public {
require(msg.sender == governance, "!governance");
split = _split;
}
function setOneSplit(address _onesplit) public {
require(msg.sender == governance, "!governance");
onesplit = _onesplit;
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function setVault(address _token, address _vault) public {
require(msg.sender == strategist || msg.sender == governance, "!strategist");
require(vaults[_token] == address(0), "vault");
vaults[_token] = _vault;
}
function approveStrategy(address _token, address _strategy) public {
require(msg.sender == governance, "!governance");
approvedStrategies[_token][_strategy] = true;
}
function revokeStrategy(address _token, address _strategy) public {
require(msg.sender == governance, "!governance");
approvedStrategies[_token][_strategy] = false;
}
function setConverter(
address _input,
address _output,
address _converter
) public {
require(msg.sender == strategist || msg.sender == governance, "!strategist");
converters[_input][_output] = _converter;
}
function setStrategy(address _token, address _strategy) public {
require(msg.sender == strategist || msg.sender == governance, "!strategist");
require(approvedStrategies[_token][_strategy] == true, "!approved");
address _current = strategies[_token];
if (_current != address(0)) {
IStrategy(_current).withdrawAll();
}
strategies[_token] = _strategy;
}
function earn(address _token, uint256 _amount) public {
address _strategy = strategies[_token];
address _want = IStrategy(_strategy).want();
if (_want != _token) {
address converter = converters[_token][_want];
IERC20(_token).safeTransfer(converter, _amount);
_amount = IConverter(converter).convert(_strategy);
IERC20(_want).safeTransfer(_strategy, _amount);
} else {
IERC20(_token).safeTransfer(_strategy, _amount);
}
IStrategy(_strategy).deposit();
}
function balanceOf(address _token) external view returns (uint256) {
return IStrategy(strategies[_token]).balanceOf();
}
function withdrawAll(address _token) public {
require(msg.sender == strategist || msg.sender == governance, "!strategist");
IStrategy(strategies[_token]).withdrawAll();
}
function inCaseTokensGetStuck(address _token, uint256 _amount) public {
require(msg.sender == strategist || msg.sender == governance, "!governance");
IERC20(_token).safeTransfer(msg.sender, _amount);
}
function inCaseStrategyTokenGetStuck(address _strategy, address _token) public {
require(msg.sender == strategist || msg.sender == governance, "!governance");
IStrategy(_strategy).withdraw(_token);
}
function getExpectedReturn(
address _strategy,
address _token,
uint256 parts
) public view returns (uint256 expected) {
uint256 _balance = IERC20(_token).balanceOf(_strategy);
address _want = IStrategy(_strategy).want();
(expected, ) = IOneSplitAudit(onesplit).getExpectedReturn(_token, _want, _balance, parts, 0);
}
// Only allows to withdraw non-core strategy tokens ~ this is over and above normal yield
function yearn(
address _strategy,
address _token,
uint256 parts
) public {
require(msg.sender == strategist || msg.sender == governance, "!governance");
// This contract should never have value in it, but just incase since this is a public call
uint256 _before = IERC20(_token).balanceOf(address(this));
IStrategy(_strategy).withdraw(_token);
uint256 _after = IERC20(_token).balanceOf(address(this));
if (_after > _before) {
uint256 _amount = _after.sub(_before);
address _want = IStrategy(_strategy).want();
uint256[] memory _distribution;
uint256 _expected;
_before = IERC20(_want).balanceOf(address(this));
IERC20(_token).safeApprove(onesplit, 0);
IERC20(_token).safeApprove(onesplit, _amount);
(_expected, _distribution) = IOneSplitAudit(onesplit).getExpectedReturn(_token, _want, _amount, parts, 0);
IOneSplitAudit(onesplit).swap(_token, _want, _amount, _expected, _distribution, 0);
_after = IERC20(_want).balanceOf(address(this));
if (_after > _before) {
_amount = _after.sub(_before);
uint256 _reward = _amount.mul(split).div(max);
earn(_want, _amount.sub(_reward));
IERC20(_want).safeTransfer(rewards, _reward);
}
}
}
function withdraw(address _token, uint256 _amount) public {
require(msg.sender == vaults[_token], "!vault");
IStrategy(strategies[_token]).withdraw(_amount);
}
}