Contract Name:
DummyMintableERC1155
Contract Source Code:
// File: @openzeppelin/contracts/introspection/IERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transfered from `from` to `to` by `operator`.
*/
event TransferSingle(
address indexed operator,
address indexed from,
address indexed to,
uint256 id,
uint256 value
);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(
address indexed account,
address indexed operator,
bool approved
);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
external
view
returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator)
external
view
returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155MetadataURI.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/introspection/ERC165.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor() internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId)
public
view
override
returns (bool)
{
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC1155/ERC1155.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
*
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using SafeMath for uint256;
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substition, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/*
* bytes4(keccak256('balanceOf(address,uint256)')) == 0x00fdd58e
* bytes4(keccak256('balanceOfBatch(address[],uint256[])')) == 0x4e1273f4
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('safeTransferFrom(address,address,uint256,uint256,bytes)')) == 0xf242432a
* bytes4(keccak256('safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)')) == 0x2eb2c2d6
*
* => 0x00fdd58e ^ 0x4e1273f4 ^ 0xa22cb465 ^
* 0xe985e9c5 ^ 0xf242432a ^ 0x2eb2c2d6 == 0xd9b67a26
*/
bytes4 private constant _INTERFACE_ID_ERC1155 = 0xd9b67a26;
/*
* bytes4(keccak256('uri(uint256)')) == 0x0e89341c
*/
bytes4 private constant _INTERFACE_ID_ERC1155_METADATA_URI = 0x0e89341c;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri) public {
_setURI(uri);
// register the supported interfaces to conform to ERC1155 via ERC165
_registerInterface(_INTERFACE_ID_ERC1155);
// register the supported interfaces to conform to ERC1155MetadataURI via ERC165
_registerInterface(_INTERFACE_ID_ERC1155_METADATA_URI);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substituion mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) external view override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id)
public
view
override
returns (uint256)
{
require(
account != address(0),
"ERC1155: balance query for the zero address"
);
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
override
returns (uint256[] memory)
{
require(
accounts.length == ids.length,
"ERC1155: accounts and ids length mismatch"
);
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
require(
accounts[i] != address(0),
"ERC1155: batch balance query for the zero address"
);
batchBalances[i] = _balances[ids[i]][accounts[i]];
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(
_msgSender() != operator,
"ERC1155: setting approval status for self"
);
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator)
public
view
override
returns (bool)
{
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(
operator,
from,
to,
_asSingletonArray(id),
_asSingletonArray(amount),
data
);
_balances[id][from] = _balances[id][from].sub(
amount,
"ERC1155: insufficient balance for transfer"
);
_balances[id][to] = _balances[id][to].add(amount);
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
require(to != address(0), "ERC1155: transfer to the zero address");
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
_balances[id][from] = _balances[id][from].sub(
amount,
"ERC1155: insufficient balance for transfer"
);
_balances[id][to] = _balances[id][to].add(amount);
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(
operator,
from,
to,
ids,
amounts,
data
);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substituion mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `account`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address account,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(account != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(
operator,
address(0),
account,
_asSingletonArray(id),
_asSingletonArray(amount),
data
);
_balances[id][account] = _balances[id][account].add(amount);
emit TransferSingle(operator, address(0), account, id, amount);
_doSafeTransferAcceptanceCheck(
operator,
address(0),
account,
id,
amount,
data
);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] = amounts[i].add(_balances[ids[i]][to]);
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(
operator,
address(0),
to,
ids,
amounts,
data
);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `account`
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address account,
uint256 id,
uint256 amount
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(
operator,
account,
address(0),
_asSingletonArray(id),
_asSingletonArray(amount),
""
);
_balances[id][account] = _balances[id][account].sub(
amount,
"ERC1155: burn amount exceeds balance"
);
emit TransferSingle(operator, account, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address account,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(account != address(0), "ERC1155: burn from the zero address");
require(
ids.length == amounts.length,
"ERC1155: ids and amounts length mismatch"
);
address operator = _msgSender();
_beforeTokenTransfer(operator, account, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][account] = _balances[ids[i]][account].sub(
amounts[i],
"ERC1155: burn amount exceeds balance"
);
}
emit TransferBatch(operator, account, address(0), ids, amounts);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155Received(
operator,
from,
id,
amount,
data
)
returns (bytes4 response) {
if (
response != IERC1155Receiver(to).onERC1155Received.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try
IERC1155Receiver(to).onERC1155BatchReceived(
operator,
from,
ids,
amounts,
data
)
returns (bytes4 response) {
if (
response !=
IERC1155Receiver(to).onERC1155BatchReceived.selector
) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element)
private
pure
returns (uint256[] memory)
{
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File: contracts/root/RootToken/IMintableERC1155.sol
pragma solidity 0.6.6;
interface IMintableERC1155 is IERC1155 {
/**
* @notice Creates `amount` tokens of token type `id`, and assigns them to `account`.
* @dev Should be callable only by MintableERC1155Predicate
* Make sure minting is done only by this function
* @param account user address for whom token is being minted
* @param id token which is being minted
* @param amount amount of token being minted
* @param data extra byte data to be accompanied with minted tokens
*/
function mint(
address account,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @notice Batched version of singular token minting, where
* for each token in `ids` respective amount to be minted from `amounts`
* array, for address `to`.
* @dev Should be callable only by MintableERC1155Predicate
* Make sure minting is done only by this function
* @param to user address for whom token is being minted
* @param ids tokens which are being minted
* @param amounts amount of each token being minted
* @param data extra byte data to be accompanied with minted tokens
*/
function mintBatch(
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File: contracts/common/Initializable.sol
pragma solidity 0.6.6;
contract Initializable {
bool inited = false;
modifier initializer() {
require(!inited, "already inited");
_;
inited = true;
}
}
// File: contracts/common/EIP712Base.sol
pragma solidity 0.6.6;
contract EIP712Base is Initializable {
struct EIP712Domain {
string name;
string version;
address verifyingContract;
bytes32 salt;
}
string public constant ERC712_VERSION = "1";
bytes32 internal constant EIP712_DOMAIN_TYPEHASH =
keccak256(
bytes(
"EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
)
);
bytes32 internal domainSeperator;
// supposed to be called once while initializing.
// one of the contractsa that inherits this contract follows proxy pattern
// so it is not possible to do this in a constructor
function _initializeEIP712(string memory name) internal initializer {
_setDomainSeperator(name);
}
function _setDomainSeperator(string memory name) internal {
domainSeperator = keccak256(
abi.encode(
EIP712_DOMAIN_TYPEHASH,
keccak256(bytes(name)),
keccak256(bytes(ERC712_VERSION)),
address(this),
bytes32(getChainId())
)
);
}
function getDomainSeperator() public view returns (bytes32) {
return domainSeperator;
}
function getChainId() public pure returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
/**
* Accept message hash and returns hash message in EIP712 compatible form
* So that it can be used to recover signer from signature signed using EIP712 formatted data
* https://eips.ethereum.org/EIPS/eip-712
* "\\x19" makes the encoding deterministic
* "\\x01" is the version byte to make it compatible to EIP-191
*/
function toTypedMessageHash(bytes32 messageHash)
internal
view
returns (bytes32)
{
return
keccak256(
abi.encodePacked("\x19\x01", getDomainSeperator(), messageHash)
);
}
}
// File: contracts/common/NativeMetaTransaction.sol
pragma solidity 0.6.6;
contract NativeMetaTransaction is EIP712Base {
using SafeMath for uint256;
bytes32 private constant META_TRANSACTION_TYPEHASH =
keccak256(
bytes(
"MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
)
);
event MetaTransactionExecuted(
address userAddress,
address payable relayerAddress,
bytes functionSignature
);
mapping(address => uint256) nonces;
/*
* Meta transaction structure.
* No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
* He should call the desired function directly in that case.
*/
struct MetaTransaction {
uint256 nonce;
address from;
bytes functionSignature;
}
function executeMetaTransaction(
address userAddress,
bytes memory functionSignature,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) public payable returns (bytes memory) {
MetaTransaction memory metaTx = MetaTransaction({
nonce: nonces[userAddress],
from: userAddress,
functionSignature: functionSignature
});
require(
verify(userAddress, metaTx, sigR, sigS, sigV),
"Signer and signature do not match"
);
// increase nonce for user (to avoid re-use)
nonces[userAddress] = nonces[userAddress].add(1);
emit MetaTransactionExecuted(
userAddress,
msg.sender,
functionSignature
);
// Append userAddress and relayer address at the end to extract it from calling context
(bool success, bytes memory returnData) = address(this).call(
abi.encodePacked(functionSignature, userAddress)
);
require(success, "Function call not successful");
return returnData;
}
function hashMetaTransaction(MetaTransaction memory metaTx)
internal
pure
returns (bytes32)
{
return
keccak256(
abi.encode(
META_TRANSACTION_TYPEHASH,
metaTx.nonce,
metaTx.from,
keccak256(metaTx.functionSignature)
)
);
}
function getNonce(address user) public view returns (uint256 nonce) {
nonce = nonces[user];
}
function verify(
address signer,
MetaTransaction memory metaTx,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) internal view returns (bool) {
require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
return
signer ==
ecrecover(
toTypedMessageHash(hashMetaTransaction(metaTx)),
sigV,
sigR,
sigS
);
}
}
// File: contracts/common/ContextMixin.sol
pragma solidity 0.6.6;
abstract contract ContextMixin {
function msgSender() internal view returns (address payable sender) {
if (msg.sender == address(this)) {
bytes memory array = msg.data;
uint256 index = msg.data.length;
assembly {
// Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
sender := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
} else {
sender = msg.sender;
}
return sender;
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value)
private
view
returns (bool)
{
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index)
private
view
returns (bytes32)
{
require(
set._values.length > index,
"EnumerableSet: index out of bounds"
);
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value)
internal
returns (bool)
{
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index)
internal
view
returns (address)
{
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index)
internal
view
returns (uint256)
{
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/access/AccessControl.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(
bytes32 indexed role,
bytes32 indexed previousAdminRole,
bytes32 indexed newAdminRole
);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(
bytes32 indexed role,
address indexed account,
address indexed sender
);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(
bytes32 indexed role,
address indexed account,
address indexed sender
);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index)
public
view
returns (address)
{
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(
hasRole(_roles[role].adminRole, _msgSender()),
"AccessControl: sender must be an admin to grant"
);
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(
hasRole(_roles[role].adminRole, _msgSender()),
"AccessControl: sender must be an admin to revoke"
);
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(
account == _msgSender(),
"AccessControl: can only renounce roles for self"
);
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts/common/AccessControlMixin.sol
pragma solidity 0.6.6;
contract AccessControlMixin is AccessControl {
string private _revertMsg;
function _setupContractId(string memory contractId) internal {
_revertMsg = string(
abi.encodePacked(contractId, ": INSUFFICIENT_PERMISSIONS")
);
}
modifier only(bytes32 role) {
require(hasRole(role, _msgSender()), _revertMsg);
_;
}
}
// File: contracts/root/RootToken/DummyMintableERC1155.sol
// This contract is not supposed to be used in production
// It's strictly for testing purpose
pragma solidity 0.6.6;
contract DummyMintableERC1155 is
ERC1155,
AccessControlMixin,
NativeMetaTransaction,
ContextMixin,
IMintableERC1155
{
bytes32 public constant PREDICATE_ROLE = keccak256("PREDICATE_ROLE");
constructor(string memory uri_) public ERC1155(uri_) {
_setupContractId("DummyMintableERC1155");
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(PREDICATE_ROLE, _msgSender());
_initializeEIP712(uri_);
}
function mint(
address account,
uint256 id,
uint256 amount,
bytes calldata data
) external override only(PREDICATE_ROLE) {
_mint(account, id, amount, data);
}
function mintBatch(
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external override only(PREDICATE_ROLE) {
_mintBatch(to, ids, amounts, data);
}
function _msgSender()
internal
view
override
returns (address payable sender)
{
return ContextMixin.msgSender();
}
}