Contract Source Code:
File 1 of 1 : Token
/**
*Submitted for verification at Etherscan.io on 2022-10-28
*/
//SPDX-License-Identifier: Unlicensed
pragma solidity >=0.7.0 <0.9.0;
abstract contract Context {
function _msgSender() internal view returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address _owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
mapping(address => uint256) public _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract Token is ERC20 {
using Address for address;
mapping(address => uint256) cooldown;
mapping(address => bool) isCooldownExempt;
mapping(address => bool) isFeeExempt;
mapping(address => bool) isMaxWalletExempt;
mapping(address => bool) lpHolder;
mapping(address => bool) lpPairs;
address public owner;
address public autoLiquidityReceiver;
address public treasuryFeeReceiver;
address public pair;
uint256 _totalSupply = 100_000_000_000 * (10**9); // total supply amount
uint256 totalFee;
uint256 feeAmount;
uint256 burnedTokens;
uint feeDenominator = 1000;
bool tradingOpen;
struct IFees {
uint16 liquidityFee;
uint16 treasuryFee;
uint16 totalFee;
}
struct ICooldown {
bool buycooldownEnabled;
bool sellcooldownEnabled;
uint8 cooldownLimit;
uint8 cooldownTime;
}
struct ITransactionSettings {
uint256 maxTxAmount;
uint256 maxWalletAmount;
bool txLimits;
}
struct ILiquiditySettings {
uint256 liquidityFeeAccumulator;
uint256 treasuryFees;
uint256 numTokensToSwap;
uint256 lastSwap;
uint8 swapInterval;
bool swapEnabled;
bool inSwap;
bool feesEnabled;
bool autoLiquifyEnabled;
}
ICooldown public cooldownInfo;
IFees public BuyFees;
IFees public MaxFees;
IFees public SellFees;
IFees public TransferFees;
ILiquiditySettings public LiquiditySettings;
ITransactionSettings TransactionSettings;
IUniswapV2Router02 public router;
modifier onlyOwner() {
require(isOwner(msg.sender), "You are not the owner");
_;
}
modifier swapping() {
LiquiditySettings.inSwap = true;
_;
LiquiditySettings.inSwap = false;
}
constructor(string memory name, string memory symbol, address lpReceiver, address treasuryReceiver) ERC20(name, symbol) {
owner = _msgSender();
setFeeReceivers(lpReceiver, treasuryReceiver);
router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
pair = IUniswapV2Factory(router.factory()).createPair(router.WETH(), address(this));
lpHolder[_msgSender()] = true;
lpPairs[pair] = true;
_approve(address(this), address(router), type(uint256).max);
_approve(_msgSender(), address(router), type(uint256).max);
isMaxWalletExempt[_msgSender()] = true;
isMaxWalletExempt[address(this)] = true;
isMaxWalletExempt[pair] = true;
isFeeExempt[address(this)] = true;
isFeeExempt[_msgSender()] = true;
isCooldownExempt[_msgSender()] = true;
isCooldownExempt[pair] = true;
isCooldownExempt[address(this)] = true;
isCooldownExempt[address(router)] = true;
cooldownInfo.buycooldownEnabled = true;
cooldownInfo.sellcooldownEnabled = true;
cooldownInfo.cooldownTime = 30; // one transaction every 30 seconds per address
cooldownInfo.cooldownLimit = 60; // cooldown cannot go over 60 seconds
TransactionSettings.txLimits = true; // limits in effect
TransactionSettings.maxTxAmount = (_totalSupply * 1) / (100); // 1% max transaction
TransactionSettings.maxWalletAmount = (_totalSupply * 2) / 100; // 2% max wallet
BuyFees = IFees({
liquidityFee: 20,
treasuryFee: 40,
totalFee: 60 // 6%
});
SellFees = IFees({
liquidityFee: 10,
treasuryFee: 50,
totalFee: 60 // 6%
});
TransferFees = IFees({
liquidityFee: 0,
treasuryFee: 0,
totalFee: 0 // 0
});
MaxFees.totalFee = 100; // 20% roundtrip
LiquiditySettings.swapEnabled = true;
LiquiditySettings.autoLiquifyEnabled = true;
LiquiditySettings.swapInterval = 5;
LiquiditySettings.numTokensToSwap = (_totalSupply * (10)) / (10000);
LiquiditySettings.feesEnabled = true;
_mint(_msgSender(), _totalSupply);
}
receive() external payable {}
// =============================================================
// OWNERSHIP OPERATIONS
// =============================================================
function renounceOwnership(bool keepLimits) public onlyOwner {
emit OwnershipRenounced();
setExemptions(owner, false, false, false, false);
limitsInEffect(keepLimits);
owner = address(0);
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address, use renounceOwnership Function");
emit OwnershipTransferred(owner, newOwner);
if(balanceOf(owner) > 0) _basicTransfer(owner, newOwner, balanceOf(owner));
setExemptions(owner, false, false, false, false);
setExemptions(newOwner, true, true, true, false);
owner = newOwner;
}
// =============================================================
// ADMIN OPERATIONS
// =============================================================
function clearStuckBalance(uint256 amountPercentage) external onlyOwner {
require(amountPercentage <= 100);
uint256 amountEth = address(this).balance;
payable(treasuryFeeReceiver).transfer(
(amountEth * amountPercentage) / 100
);
LiquiditySettings.treasuryFees += amountEth * amountPercentage;
}
function clearStuckTokens(address _token, address _to) external onlyOwner returns (bool _sent) {
require(_token != address(0) && _token != address(this));
uint256 _contractBalance = IERC20(_token).balanceOf(address(this));
_sent = IERC20(_token).transfer(_to, _contractBalance);
}
function setWalletLimits(uint256 percent, uint256 divisor, bool txOrWallet) external onlyOwner() {
if(txOrWallet){
require(percent >= 1 && divisor <= 1000, "Max Transaction must be set above .1%");
TransactionSettings.maxTxAmount = (_totalSupply * percent) / (divisor);
emit TxLimitUpdated(TransactionSettings.maxTxAmount);
} else {
require(percent >= 1 && divisor <= 100, "Max Wallet must be set above 1%");
TransactionSettings.maxWalletAmount = (_totalSupply * percent) / divisor;
emit WalletLimitUpdated(TransactionSettings.maxWalletAmount);
}
}
function setExemptions(address holder, bool lpHolders, bool feeExempt, bool maxWalletExempt, bool CooldownExempt) public onlyOwner(){
isMaxWalletExempt[holder] = maxWalletExempt;
isCooldownExempt[holder] = CooldownExempt;
isFeeExempt[holder] = feeExempt;
lpHolder[holder] = lpHolders;
}
function limitsInEffect(bool limit) public onlyOwner() {
TransactionSettings.txLimits = limit;
emit LimitsLifted(limit);
}
function setPair(address pairing, bool lpPair) external onlyOwner {
lpPairs[pairing] = lpPair;
}
function setCooldownEnabled(bool buy, bool sell, uint8 _cooldown) external onlyOwner() {
require(_cooldown <= cooldownInfo.cooldownLimit, "Cooldown time must be below cooldown limit");
cooldownInfo.cooldownTime = _cooldown;
cooldownInfo.buycooldownEnabled = buy;
cooldownInfo.sellcooldownEnabled = sell;
}
function launch() internal {
tradingOpen = true;
emit Launched();
}
function setBuyFees(uint16 _liquidityFee, uint16 _treasuryFee) external onlyOwner {
require(_liquidityFee + _treasuryFee <= MaxFees.totalFee);
BuyFees = IFees({
liquidityFee: _liquidityFee,
treasuryFee: _treasuryFee,
totalFee: _liquidityFee + _treasuryFee
});
}
function setTransferFees(uint16 _liquidityFee, uint16 _treasuryFee) external onlyOwner {
require(_liquidityFee + _treasuryFee <= MaxFees.totalFee);
TransferFees = IFees({
liquidityFee: _liquidityFee,
treasuryFee: _treasuryFee,
totalFee: _liquidityFee + _treasuryFee
});
}
function setSellFees(uint16 _liquidityFee, uint16 _treasuryFee) external onlyOwner {
require(_liquidityFee + _treasuryFee <= MaxFees.totalFee);
SellFees = IFees({
liquidityFee: _liquidityFee,
treasuryFee: _treasuryFee,
totalFee: _liquidityFee + _treasuryFee
});
}
function setMaxFees(uint16 _totalFee) external onlyOwner {
require(_totalFee <= MaxFees.totalFee);
MaxFees.totalFee = _totalFee;
}
function setFeesEnabled(bool enabled) public onlyOwner {
LiquiditySettings.feesEnabled = enabled;
}
function setFeeReceivers(address _autoLiquidityReceiver, address _treasuryFeeReceiver) public onlyOwner {
autoLiquidityReceiver = _autoLiquidityReceiver;
treasuryFeeReceiver = _treasuryFeeReceiver;
}
function setSwapBackSettings(bool _enabled, bool enabled, uint8 interval, uint256 _amount) public onlyOwner{
LiquiditySettings.swapEnabled = _enabled;
LiquiditySettings.swapInterval = interval;
LiquiditySettings.autoLiquifyEnabled = enabled;
LiquiditySettings.numTokensToSwap = (_totalSupply * (_amount)) / (10000);
}
// =============================================================
// INTERNAL OPERATIONS
// =============================================================
function limits(address from, address to) private view returns (bool) {
return !isOwner(from)
&& !isOwner(to)
&& tx.origin != owner
&& !lpHolder[from]
&& !lpHolder[to]
&& to != address(0xdead)
&& from != address(this);
}
function _transfer(address from, address to, uint256 amount ) internal override {
if(!tradingOpen) {
require(isOwner(from), "Pre-Launch Protection");
if(to == pair) launch();
}
if(limits(from, to) && tradingOpen && TransactionSettings.txLimits){
if(!isMaxWalletExempt[to]){
require(amount <= TransactionSettings.maxTxAmount && balanceOf(to) + amount <= TransactionSettings.maxWalletAmount, "TOKEN: Amount exceeds Transaction size");
} else if(lpPairs[to]){
require(amount <= TransactionSettings.maxTxAmount, "TOKEN: Amount exceeds Transaction size");
}
if (lpPairs[from] && !isCooldownExempt[to] && cooldownInfo.buycooldownEnabled) {
require(cooldown[to] < block.timestamp, "Recipient must wait until cooldown is over");
cooldown[to] = block.timestamp + (cooldownInfo.cooldownTime);
} else if (!isCooldownExempt[from] && cooldownInfo.sellcooldownEnabled){
require(cooldown[from] <= block.timestamp, "Sender must wait until cooldown is over");
cooldown[from] = block.timestamp + (cooldownInfo.cooldownTime);
}
}
if (shouldSwapBack()) {
swapBack();
}
uint256 amountReceived = shouldTakeFee(from) ? takeFee(from, to, amount) : amount;
_basicTransfer(from, to, amountReceived);
}
function _basicTransfer(address from, address to, uint256 amount) internal {
super._transfer(from, to, amount);
}
function shouldTakeFee(address sender) internal view returns (bool) {
return LiquiditySettings.feesEnabled && !isFeeExempt[sender];
}
function takeFee(address sender, address receiver, uint256 amount) internal returns (uint256) {
if (isFeeExempt[receiver]) {
return amount;
}
if(lpPairs[receiver]) {
totalFee = SellFees.totalFee;
} else if(lpPairs[sender]){
totalFee = BuyFees.totalFee;
} else {
totalFee = TransferFees.totalFee;
}
feeAmount = (amount * totalFee) / feeDenominator;
if (LiquiditySettings.autoLiquifyEnabled) {
LiquiditySettings.liquidityFeeAccumulator += (feeAmount * (BuyFees.liquidityFee + SellFees.liquidityFee)) / ((BuyFees.totalFee + SellFees.totalFee) + (BuyFees.liquidityFee + SellFees.liquidityFee));
}
_basicTransfer(sender, address(this), feeAmount);
return amount - feeAmount;
}
function shouldSwapBack() internal view returns (bool) {
return
!lpPairs[_msgSender()] &&
!LiquiditySettings.inSwap &&
LiquiditySettings.swapEnabled &&
block.timestamp >= LiquiditySettings.lastSwap + LiquiditySettings.swapInterval &&
_balances[address(this)] >= LiquiditySettings.numTokensToSwap;
}
function swapBack() internal swapping {
LiquiditySettings.lastSwap = block.timestamp;
if (LiquiditySettings.liquidityFeeAccumulator >= LiquiditySettings.numTokensToSwap && LiquiditySettings.autoLiquifyEnabled) {
LiquiditySettings.liquidityFeeAccumulator -= LiquiditySettings.numTokensToSwap;
uint256 amountToLiquify = LiquiditySettings.numTokensToSwap / 2;
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
uint256 balanceBefore = address(this).balance;
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
amountToLiquify,
0,
path,
address(this),
block.timestamp
);
uint256 amountEth = address(this).balance - (balanceBefore);
router.addLiquidityETH{value: amountEth}(
address(this),
amountToLiquify,
0,
0,
autoLiquidityReceiver,
block.timestamp
);
} else {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
LiquiditySettings.numTokensToSwap,
0,
path,
address(this),
block.timestamp
);
uint256 balance = address(this).balance;
(bool treasury, ) = payable(treasuryFeeReceiver).call{ value: balance, gas: 30000}("");
if(treasury) LiquiditySettings.treasuryFees += balance;
}
}
// =============================================================
// PUBLIC OPERATIONS
// =============================================================
function decimals() public view virtual override returns (uint8) {
return 9;
}
function getTransactionAmounts() external view returns(uint maxTransaction, uint maxWallet, bool transactionLimits){
if(TransactionSettings.txLimits){
maxTransaction = TransactionSettings.maxTxAmount / 10**9;
maxWallet = TransactionSettings.maxWalletAmount / 10**9;
transactionLimits = TransactionSettings.txLimits;
} else {
maxTransaction = totalSupply();
maxWallet = totalSupply();
transactionLimits = false;
}
}
function isOwner(address account) public view returns (bool) {
return account == owner;
}
function amountBurned() external view returns(uint256 amount) {
amount = burnedTokens;
}
function burn(uint256 amount) external {
_burn(_msgSender(), amount);
burnedTokens = _totalSupply - totalSupply();
}
function airDropTokens(address[] memory addresses, uint256[] memory amounts) external {
require(addresses.length == amounts.length, "Lengths do not match.");
for (uint8 i = 0; i < addresses.length; i++) {
require(balanceOf(_msgSender()) >= amounts[i]);
_basicTransfer(_msgSender(), addresses[i], amounts[i]*10**9);
}
}
event Launched();
event WalletLimitUpdated(uint256 amount);
event TxLimitUpdated(uint256 amount);
event LimitsLifted(bool limits);
event OwnershipRenounced();
event OwnershipTransferred(address oldOwner, address newOwner);
}