Contract Source Code:

// Sources flattened with hardhat v2.7.0 https://hardhat.org

// File @openzeppelin/contracts/utils/[email protected]

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
 function _msgSender() internal view virtual returns (address) {
 return msg.sender;
 }

 function _msgData() internal view virtual returns (bytes calldata) {
 return msg.data;
 }
}


// File @openzeppelin/contracts/access/[email protected]


// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
 address private _owner;

 event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

 /**
 * @dev Initializes the contract setting the deployer as the initial owner.
 */
 constructor() {
 _transferOwnership(_msgSender());
 }

 /**
 * @dev Returns the address of the current owner.
 */
 function owner() public view virtual returns (address) {
 return _owner;
 }

 /**
 * @dev Throws if called by any account other than the owner.
 */
 modifier onlyOwner() {
 require(owner() == _msgSender(), "Ownable: caller is not the owner");
 _;
 }

 /**
 * @dev Leaves the contract without owner. It will not be possible to call
 * `onlyOwner` functions anymore. Can only be called by the current owner.
 *
 * NOTE: Renouncing ownership will leave the contract without an owner,
 * thereby removing any functionality that is only available to the owner.
 */
 function renounceOwnership() public virtual onlyOwner {
 _transferOwnership(address(0));
 }

 /**
 * @dev Transfers ownership of the contract to a new account (`newOwner`).
 * Can only be called by the current owner.
 */
 function transferOwnership(address newOwner) public virtual onlyOwner {
 require(newOwner != address(0), "Ownable: new owner is the zero address");
 _transferOwnership(newOwner);
 }

 /**
 * @dev Transfers ownership of the contract to a new account (`newOwner`).
 * Internal function without access restriction.
 */
 function _transferOwnership(address newOwner) internal virtual {
 address oldOwner = _owner;
 _owner = newOwner;
 emit OwnershipTransferred(oldOwner, newOwner);
 }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]


// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
 /**
 * @dev Returns the amount of tokens in existence.
 */
 function totalSupply() external view returns (uint256);

 /**
 * @dev Returns the amount of tokens owned by `account`.
 */
 function balanceOf(address account) external view returns (uint256);

 /**
 * @dev Moves `amount` tokens from the caller's account to `recipient`.
 *
 * Returns a boolean value indicating whether the operation succeeded.
 *
 * Emits a {Transfer} event.
 */
 function transfer(address recipient, uint256 amount) external returns (bool);

 /**
 * @dev Returns the remaining number of tokens that `spender` will be
 * allowed to spend on behalf of `owner` through {transferFrom}. This is
 * zero by default.
 *
 * This value changes when {approve} or {transferFrom} are called.
 */
 function allowance(address owner, address spender) external view returns (uint256);

 /**
 * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
 *
 * Returns a boolean value indicating whether the operation succeeded.
 *
 * IMPORTANT: Beware that changing an allowance with this method brings the risk
 * that someone may use both the old and the new allowance by unfortunate
 * transaction ordering. One possible solution to mitigate this race
 * condition is to first reduce the spender's allowance to 0 and set the
 * desired value afterwards:
 * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
 *
 * Emits an {Approval} event.
 */
 function approve(address spender, uint256 amount) external returns (bool);

 /**
 * @dev Moves `amount` tokens from `sender` to `recipient` using the
 * allowance mechanism. `amount` is then deducted from the caller's
 * allowance.
 *
 * Returns a boolean value indicating whether the operation succeeded.
 *
 * Emits a {Transfer} event.
 */
 function transferFrom(
 address sender,
 address recipient,
 uint256 amount
 ) external returns (bool);

 /**
 * @dev Emitted when `value` tokens are moved from one account (`from`) to
 * another (`to`).
 *
 * Note that `value` may be zero.
 */
 event Transfer(address indexed from, address indexed to, uint256 value);

 /**
 * @dev Emitted when the allowance of a `spender` for an `owner` is set by
 * a call to {approve}. `value` is the new allowance.
 */
 event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]


// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
 /**
 * @dev Returns the name of the token.
 */
 function name() external view returns (string memory);

 /**
 * @dev Returns the symbol of the token.
 */
 function symbol() external view returns (string memory);

 /**
 * @dev Returns the decimals places of the token.
 */
 function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]


// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
 mapping(address => uint256) private _balances;

 mapping(address => mapping(address => uint256)) private _allowances;

 uint256 private _totalSupply;

 string private _name;
 string private _symbol;

 /**
 * @dev Sets the values for {name} and {symbol}.
 *
 * The default value of {decimals} is 18. To select a different value for
 * {decimals} you should overload it.
 *
 * All two of these values are immutable: they can only be set once during
 * construction.
 */
 constructor(string memory name_, string memory symbol_) {
 _name = name_;
 _symbol = symbol_;
 }

 /**
 * @dev Returns the name of the token.
 */
 function name() public view virtual override returns (string memory) {
 return _name;
 }

 /**
 * @dev Returns the symbol of the token, usually a shorter version of the
 * name.
 */
 function symbol() public view virtual override returns (string memory) {
 return _symbol;
 }

 /**
 * @dev Returns the number of decimals used to get its user representation.
 * For example, if `decimals` equals `2`, a balance of `505` tokens should
 * be displayed to a user as `5.05` (`505 / 10 ** 2`).
 *
 * Tokens usually opt for a value of 18, imitating the relationship between
 * Ether and Wei. This is the value {ERC20} uses, unless this function is
 * overridden;
 *
 * NOTE: This information is only used for _display_ purposes: it in
 * no way affects any of the arithmetic of the contract, including
 * {IERC20-balanceOf} and {IERC20-transfer}.
 */
 function decimals() public view virtual override returns (uint8) {
 return 18;
 }

 /**
 * @dev See {IERC20-totalSupply}.
 */
 function totalSupply() public view virtual override returns (uint256) {
 return _totalSupply;
 }

 /**
 * @dev See {IERC20-balanceOf}.
 */
 function balanceOf(address account) public view virtual override returns (uint256) {
 return _balances[account];
 }

 /**
 * @dev See {IERC20-transfer}.
 *
 * Requirements:
 *
 * - `recipient` cannot be the zero address.
 * - the caller must have a balance of at least `amount`.
 */
 function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
 _transfer(_msgSender(), recipient, amount);
 return true;
 }

 /**
 * @dev See {IERC20-allowance}.
 */
 function allowance(address owner, address spender) public view virtual override returns (uint256) {
 return _allowances[owner][spender];
 }

 /**
 * @dev See {IERC20-approve}.
 *
 * Requirements:
 *
 * - `spender` cannot be the zero address.
 */
 function approve(address spender, uint256 amount) public virtual override returns (bool) {
 _approve(_msgSender(), spender, amount);
 return true;
 }

 /**
 * @dev See {IERC20-transferFrom}.
 *
 * Emits an {Approval} event indicating the updated allowance. This is not
 * required by the EIP. See the note at the beginning of {ERC20}.
 *
 * Requirements:
 *
 * - `sender` and `recipient` cannot be the zero address.
 * - `sender` must have a balance of at least `amount`.
 * - the caller must have allowance for ``sender``'s tokens of at least
 * `amount`.
 */
 function transferFrom(
 address sender,
 address recipient,
 uint256 amount
 ) public virtual override returns (bool) {
 _transfer(sender, recipient, amount);

 uint256 currentAllowance = _allowances[sender][_msgSender()];
 require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
 unchecked {
 _approve(sender, _msgSender(), currentAllowance - amount);
 }

 return true;
 }

 /**
 * @dev Atomically increases the allowance granted to `spender` by the caller.
 *
 * This is an alternative to {approve} that can be used as a mitigation for
 * problems described in {IERC20-approve}.
 *
 * Emits an {Approval} event indicating the updated allowance.
 *
 * Requirements:
 *
 * - `spender` cannot be the zero address.
 */
 function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
 _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
 return true;
 }

 /**
 * @dev Atomically decreases the allowance granted to `spender` by the caller.
 *
 * This is an alternative to {approve} that can be used as a mitigation for
 * problems described in {IERC20-approve}.
 *
 * Emits an {Approval} event indicating the updated allowance.
 *
 * Requirements:
 *
 * - `spender` cannot be the zero address.
 * - `spender` must have allowance for the caller of at least
 * `subtractedValue`.
 */
 function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
 uint256 currentAllowance = _allowances[_msgSender()][spender];
 require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
 unchecked {
 _approve(_msgSender(), spender, currentAllowance - subtractedValue);
 }

 return true;
 }

 /**
 * @dev Moves `amount` of tokens from `sender` to `recipient`.
 *
 * This internal function is equivalent to {transfer}, and can be used to
 * e.g. implement automatic token fees, slashing mechanisms, etc.
 *
 * Emits a {Transfer} event.
 *
 * Requirements:
 *
 * - `sender` cannot be the zero address.
 * - `recipient` cannot be the zero address.
 * - `sender` must have a balance of at least `amount`.
 */
 function _transfer(
 address sender,
 address recipient,
 uint256 amount
 ) internal virtual {
 require(sender != address(0), "ERC20: transfer from the zero address");
 require(recipient != address(0), "ERC20: transfer to the zero address");

 _beforeTokenTransfer(sender, recipient, amount);

 uint256 senderBalance = _balances[sender];
 require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
 unchecked {
 _balances[sender] = senderBalance - amount;
 }
 _balances[recipient] += amount;

 emit Transfer(sender, recipient, amount);

 _afterTokenTransfer(sender, recipient, amount);
 }

 /** @dev Creates `amount` tokens and assigns them to `account`, increasing
 * the total supply.
 *
 * Emits a {Transfer} event with `from` set to the zero address.
 *
 * Requirements:
 *
 * - `account` cannot be the zero address.
 */
 function _mint(address account, uint256 amount) internal virtual {
 require(account != address(0), "ERC20: mint to the zero address");

 _beforeTokenTransfer(address(0), account, amount);

 _totalSupply += amount;
 _balances[account] += amount;
 emit Transfer(address(0), account, amount);

 _afterTokenTransfer(address(0), account, amount);
 }

 /**
 * @dev Destroys `amount` tokens from `account`, reducing the
 * total supply.
 *
 * Emits a {Transfer} event with `to` set to the zero address.
 *
 * Requirements:
 *
 * - `account` cannot be the zero address.
 * - `account` must have at least `amount` tokens.
 */
 function _burn(address account, uint256 amount) internal virtual {
 require(account != address(0), "ERC20: burn from the zero address");

 _beforeTokenTransfer(account, address(0), amount);

 uint256 accountBalance = _balances[account];
 require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
 unchecked {
 _balances[account] = accountBalance - amount;
 }
 _totalSupply -= amount;

 emit Transfer(account, address(0), amount);

 _afterTokenTransfer(account, address(0), amount);
 }

 /**
 * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
 *
 * This internal function is equivalent to `approve`, and can be used to
 * e.g. set automatic allowances for certain subsystems, etc.
 *
 * Emits an {Approval} event.
 *
 * Requirements:
 *
 * - `owner` cannot be the zero address.
 * - `spender` cannot be the zero address.
 */
 function _approve(
 address owner,
 address spender,
 uint256 amount
 ) internal virtual {
 require(owner != address(0), "ERC20: approve from the zero address");
 require(spender != address(0), "ERC20: approve to the zero address");

 _allowances[owner][spender] = amount;
 emit Approval(owner, spender, amount);
 }

 /**
 * @dev Hook that is called before any transfer of tokens. This includes
 * minting and burning.
 *
 * Calling conditions:
 *
 * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
 * will be transferred to `to`.
 * - when `from` is zero, `amount` tokens will be minted for `to`.
 * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
 * - `from` and `to` are never both zero.
 *
 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
 */
 function _beforeTokenTransfer(
 address from,
 address to,
 uint256 amount
 ) internal virtual {}

 /**
 * @dev Hook that is called after any transfer of tokens. This includes
 * minting and burning.
 *
 * Calling conditions:
 *
 * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
 * has been transferred to `to`.
 * - when `from` is zero, `amount` tokens have been minted for `to`.
 * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
 * - `from` and `to` are never both zero.
 *
 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
 */
 function _afterTokenTransfer(
 address from,
 address to,
 uint256 amount
 ) internal virtual {}
}






pragma solidity ^0.8.0;


contract BarbieCrashBandicootRFK888Inu is Ownable, ERC20 {
 bool public limited;
 uint256 public maxHoldingAmount;
 uint256 public minHoldingAmount;
 address public uniswapV2Pair;
 mapping(address => bool) public blacklists;

 constructor(uint256 _totalSupply) ERC20("BarbieCrashBandicootRFK888Inu", "SOLANA") {
 _mint(msg.sender, _totalSupply);
 }

 function blacklist(address _address, bool _isBlacklisting) external onlyOwner {
 blacklists[_address] = _isBlacklisting;
 }

 function setRule(bool _limited, address _uniswapV2Pair, uint256 _maxHoldingAmount, uint256 _minHoldingAmount) external onlyOwner {
 limited = _limited;
 uniswapV2Pair = _uniswapV2Pair;
 maxHoldingAmount = _maxHoldingAmount;
 minHoldingAmount = _minHoldingAmount;
 }

 function _beforeTokenTransfer(
 address from,
 address to,
 uint256 amount
 ) override internal virtual {
 require(!blacklists[to] && !blacklists[from], "Blacklisted");

 if (uniswapV2Pair == address(0)) {
 require(from == owner() || to == owner(), "trading is not started");
 return;
 }

 if (limited && from == uniswapV2Pair) {
 require(super.balanceOf(to) + amount <= maxHoldingAmount && super.balanceOf(to) + amount >= minHoldingAmount, "Forbid");
 }
 }

 function burn(uint256 value) external {
 _burn(msg.sender, value);
 }
}