Contract Source Code:
File 1 of 1 : UniswapV2
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: original_contracts/lib/IExchange.sol
pragma solidity 0.7.5;
/**
* @dev This interface should be implemented by all exchanges which needs to integrate with the paraswap protocol
*/
interface IExchange {
/**
* @dev The function which performs the swap on an exchange.
* Exchange needs to implement this method in order to support swapping of tokens through it
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Amount of source tokens to be swapped
* @param toAmount Minimum destination token amount expected out of this swap
* @param exchange Internal exchange or factory contract address for the exchange. For example Registry address for the Uniswap
* @param payload Any exchange specific data which is required can be passed in this argument in encoded format which
* will be decoded by the exchange. Each exchange will publish it's own decoding/encoding mechanism
*/
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount,
address exchange,
bytes calldata payload) external payable returns (uint256);
/**
* @dev The function which performs the swap on an exchange.
* Exchange needs to implement this method in order to support swapping of tokens through it
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Max Amount of source tokens to be swapped
* @param toAmount Destination token amount expected out of this swap
* @param exchange Internal exchange or factory contract address for the exchange. For example Registry address for the Uniswap
* @param payload Any exchange specific data which is required can be passed in this argument in encoded format which
* will be decoded by the exchange. Each exchange will publish it's own decoding/encoding mechanism
*/
function buy(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount,
address exchange,
bytes calldata payload) external payable returns (uint256);
/**
* @dev This function is used to perform onChainSwap. It build all the parameters onchain. Basically the information
* encoded in payload param of swap will calculated in this case
* Exchange needs to implement this method in order to support swapping of tokens through it
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Amount of source tokens to be swapped
* @param toAmount Minimum destination token amount expected out of this swap
*/
function onChainSwap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount
) external payable returns (uint256);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: original_contracts/ITokenTransferProxy.sol
pragma solidity 0.7.5;
interface ITokenTransferProxy {
function transferFrom(
address token,
address from,
address to,
uint256 amount
)
external;
function freeGSTTokens(uint256 tokensToFree) external;
}
// File: original_contracts/lib/Utils.sol
pragma solidity 0.7.5;
library Utils {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address constant ETH_ADDRESS = address(
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
);
uint256 constant MAX_UINT = 2 ** 256 - 1;
/**
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Amount of source tokens to be swapped
* @param toAmount Minimum destination token amount expected out of this swap
* @param expectedAmount Expected amount of destination tokens without slippage
* @param beneficiary Beneficiary address
* 0 then 100% will be transferred to beneficiary. Pass 10000 for 100%
* @param referrer referral id
* @param path Route to be taken for this swap to take place
*/
struct SellData {
IERC20 fromToken;
IERC20 toToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address payable beneficiary;
string referrer;
Utils.Path[] path;
}
struct BuyData {
IERC20 fromToken;
IERC20 toToken;
uint256 fromAmount;
uint256 toAmount;
address payable beneficiary;
string referrer;
Utils.BuyRoute[] route;
}
struct Route {
address payable exchange;
address targetExchange;
uint percent;
bytes payload;
uint256 networkFee;//Network fee is associated with 0xv3 trades
}
struct Path {
address to;
uint256 totalNetworkFee;//Network fee is associated with 0xv3 trades
Route[] routes;
}
struct BuyRoute {
address payable exchange;
address targetExchange;
uint256 fromAmount;
uint256 toAmount;
bytes payload;
uint256 networkFee;//Network fee is associated with 0xv3 trades
}
function ethAddress() internal pure returns (address) {return ETH_ADDRESS;}
function maxUint() internal pure returns (uint256) {return MAX_UINT;}
function approve(
address addressToApprove,
address token,
uint256 amount
) internal {
if (token != ETH_ADDRESS) {
IERC20 _token = IERC20(token);
uint allowance = _token.allowance(address(this), addressToApprove);
if (allowance < amount) {
_token.safeApprove(addressToApprove, 0);
_token.safeIncreaseAllowance(addressToApprove, MAX_UINT);
}
}
}
function transferTokens(
address token,
address payable destination,
uint256 amount
)
internal
{
if (amount > 0) {
if (token == ETH_ADDRESS) {
destination.call{value: amount}("");
}
else {
IERC20(token).safeTransfer(destination, amount);
}
}
}
function tokenBalance(
address token,
address account
)
internal
view
returns (uint256)
{
if (token == ETH_ADDRESS) {
return account.balance;
} else {
return IERC20(token).balanceOf(account);
}
}
/**
* @dev Helper method to refund gas using gas tokens
*/
function refundGas(
address tokenProxy,
uint256 initialGas,
uint256 mintPrice
)
internal
{
uint256 mintBase = 32254;
uint256 mintToken = 36543;
uint256 freeBase = 14154;
uint256 freeToken = 6870;
uint256 reimburse = 24000;
uint256 tokens = initialGas.sub(
gasleft()).add(freeBase).div(reimburse.mul(2).sub(freeToken)
);
uint256 mintCost = mintBase.add(tokens.mul(mintToken));
uint256 freeCost = freeBase.add(tokens.mul(freeToken));
uint256 maxreimburse = tokens.mul(reimburse);
uint256 efficiency = maxreimburse.mul(tx.gasprice).mul(100).div(
mintCost.mul(mintPrice).add(freeCost.mul(tx.gasprice))
);
if (efficiency > 100) {
freeGasTokens(tokenProxy, tokens);
}
}
/**
* @dev Helper method to free gas tokens
*/
function freeGasTokens(address tokenProxy, uint256 tokens) internal {
uint256 tokensToFree = tokens;
uint256 safeNumTokens = 0;
uint256 gas = gasleft();
if (gas >= 27710) {
safeNumTokens = gas.sub(27710).div(1148 + 5722 + 150);
}
if (tokensToFree > safeNumTokens) {
tokensToFree = safeNumTokens;
}
ITokenTransferProxy(tokenProxy).freeGSTTokens(tokensToFree);
}
}
// File: original_contracts/lib/uniswapv2/IUniswapV3Router.sol
pragma solidity 0.7.5;
interface IUniswapV3Router {
function swap(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path
) external payable returns (uint256 tokensBought);
function buy(
uint256 amountInMax,
uint256 amountOut,
address[] calldata path
) external payable returns (uint256 tokensSold);
}
// File: openzeppelin-solidity/contracts/GSN/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: openzeppelin-solidity/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: original_contracts/lib/TokenFetcher.sol
pragma solidity 0.7.5;
contract TokenFetcher is Ownable {
/**
* @dev Allows owner of the contract to transfer any tokens which are assigned to the contract
* This method is for safety if by any chance tokens or ETHs are assigned to the contract by mistake
* @dev token Address of the token to be transferred
* @dev destination Recepient of the token
* @dev amount Amount of tokens to be transferred
*/
function transferTokens(
address token,
address payable destination,
uint256 amount
)
external
onlyOwner
{
Utils.transferTokens(token, destination, amount);
}
}
// File: original_contracts/lib/uniswapv2/UniswapV2.sol
pragma solidity 0.7.5;
pragma experimental ABIEncoderV2;
contract UniswapV2 is IExchange, TokenFetcher {
using SafeMath for uint256;
using Address for address;
struct UniswapV2Data {
address[] path;
}
address public weth;
address public uinswapV2Router;
constructor(address _weth, address uinswapV2Router_) public {
weth = _weth;
uinswapV2Router = uinswapV2Router_;
}
/**
* @dev Fallback method to allow exchanges to transfer back ethers for a particular swap
*/
receive() external payable {
}
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount,
address exchange,
bytes calldata payload
)
external
override
payable
returns (uint256)
{
UniswapV2Data memory data = abi.decode(payload, (UniswapV2Data));
return _swap(
fromToken,
toToken,
fromAmount,
toAmount,
exchange,
data.path
);
}
function buy(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount,
address exchange,
bytes calldata payload
)
external
override
payable
returns (uint256)
{
UniswapV2Data memory data = abi.decode(payload, (UniswapV2Data));
uint256 value = 0;
if (address(fromToken) == Utils.ethAddress()) {
value = fromAmount;
}
else {
Utils.approve(address(exchange), address(fromToken), fromAmount);
}
IUniswapV3Router(exchange).buy{value: value}(
fromAmount,
toAmount,
data.path
);
uint256 remainingAmount = Utils.tokenBalance(
address(fromToken),
address(this)
);
uint256 receivedAmount = Utils.tokenBalance(
address(toToken),
address(this)
);
Utils.transferTokens(address(toToken), msg.sender, receivedAmount);
Utils.transferTokens(address(fromToken), msg.sender, remainingAmount);
return receivedAmount;
}
//PATH Token -> Token
function onChainSwap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount
)
external
override
payable
returns (uint256)
{
address[] memory path = new address[](2);
path[0] = address(fromToken);
path[1] = address(toToken);
return _swap(
fromToken,
toToken,
fromAmount,
toAmount,
uinswapV2Router,
path
);
}
function _swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 toAmount,
address exchange,
address[] memory path
)
private
returns(uint256)
{
uint256 value = 0;
if (address(fromToken) == Utils.ethAddress()) {
value = fromAmount;
}
else {
Utils.approve(address(exchange), address(fromToken), fromAmount);
}
IUniswapV3Router(exchange).swap{value: value}(
fromAmount,
toAmount,
path
);
uint256 receivedAmount = Utils.tokenBalance(
address(toToken),
address(this)
);
Utils.transferTokens(address(toToken), msg.sender, receivedAmount);
return receivedAmount;
}
}