Contract Source Code:
File 1 of 1 : AstaInu
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal virtual view returns (address payable) {
return msg.sender;
}
function _msgData() internal virtual view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function ceil(uint256 a, uint256 m) internal pure returns (uint256) {
uint256 c = add(a,m);
uint256 d = sub(c,1);
return mul(div(d,m),m);
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash
= 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Pair {
function sync() external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
}
contract AstaInu is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
string private _name = "AstaInu";
string private _symbol = "AINU";
uint256 private _decimals = 18;
mapping(address => uint256) internal _reflectionBalance;
mapping(address => uint256) internal _tokenBalance;
mapping(address => mapping(address => uint256)) internal _allowances;
uint256 private constant MAX = ~uint256(0);
uint256 internal _tokenTotal = 1_000_000_000_000*(10**decimals());
uint256 internal _reflectionTotal = (MAX - (MAX % _tokenTotal));
mapping(address => bool) isTaxless;
mapping(address => bool) internal _isExcluded;
address[] internal _excluded;
uint256 public _feeDecimal = 0; // do not change this value...
uint256 public _taxFee = 0; // means 2% which distribute to all holders
uint256 public _liquidityFee = 8; // means 10% add liquidity on each buy and sell
uint256 public _burnFee = 0; // means 3% it means burn 3%
address liquidityWallet=0xF09b8A7aa3F4CfAC9e05ec3751407465203BF83D;
address DEAD = 0x000000000000000000000000000000000000dEaD;
uint256 public _taxFeeTotal;
uint256 public _burnFeeTotal;
uint256 public _liquidityFeeTotal;
bool public isFeeActive = true; // should be true
bool private inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public maxTxAmount = 10000000000*(10**decimals()) ; // 1%
uint256 public minTokensBeforeSwap = 1_000_000*(10**decimals());
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(uint256 tokensSwapped,uint256 ethReceived, uint256 tokensIntoLiqudity);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() public {
//IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x10ED43C718714eb63d5aA57B78B54704E256024E); // for BSC Pncake v2
// IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x05fF2B0DB69458A0750badebc4f9e13aDd608C7F); // for BSC pancake v1
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // for Ethereum uniswap v2
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
isTaxless[owner()] = true;
isTaxless[address(this)] = true;
// exlcude pair address from tax rewards
_isExcluded[address(uniswapV2Pair)] = true;
_excluded.push(address(uniswapV2Pair));
_reflectionBalance[owner()] = _reflectionTotal;
emit Transfer(address(0),owner(), _tokenTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint256) {
return _decimals;
}
function totalSupply() public override view returns (uint256) {
return _tokenTotal;
}
function balanceOf(address account) public override view returns (uint256) {
if (_isExcluded[account]) return _tokenBalance[account];
return tokenFromReflection(_reflectionBalance[account]);
}
function transfer(address recipient, uint256 amount)
public
override
virtual
returns (bool)
{
_transfer(_msgSender(),recipient,amount);
return true;
}
function allowance(address owner, address spender)
public
override
view
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override virtual returns (bool) {
_transfer(sender,recipient,amount);
_approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub( amount,"ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function reflectionFromToken(uint256 tokenAmount, bool deductTransferFee)
public
view
returns (uint256)
{
require(tokenAmount <= _tokenTotal, "Amount must be less than supply");
if (!deductTransferFee) {
return tokenAmount.mul(_getReflectionRate());
} else {
return
tokenAmount.sub(tokenAmount.mul(_taxFee).div(10** _feeDecimal + 2)).mul(
_getReflectionRate()
);
}
}
function tokenFromReflection(uint256 reflectionAmount)
public
view
returns (uint256)
{
require(
reflectionAmount <= _reflectionTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getReflectionRate();
return reflectionAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(
account != address(uniswapV2Router),
"ERC20: We can not exclude Uniswap router."
);
require(!_isExcluded[account], "ERC20: Account is already excluded");
if (_reflectionBalance[account] > 0) {
_tokenBalance[account] = tokenFromReflection(
_reflectionBalance[account]
);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "ERC20: Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tokenBalance[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address sender,
address recipient,
uint256 amount
) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(amount <= maxTxAmount, "Transfer Limit Exceeds");
uint256 contractTokenBalance = balanceOf(address(this));
bool overMinTokenBalance = contractTokenBalance >= minTokensBeforeSwap;
if (!inSwapAndLiquify && overMinTokenBalance && sender != uniswapV2Pair && swapAndLiquifyEnabled) {
swapAndLiquify(contractTokenBalance);
}
uint256 transferAmount = amount;
uint256 rate = _getReflectionRate();
if(isFeeActive && !isTaxless[_msgSender()] && !isTaxless[recipient] && !inSwapAndLiquify){
transferAmount = collectFee(sender,transferAmount,rate);
}
//transfer reflection
_reflectionBalance[sender] = _reflectionBalance[sender].sub(amount.mul(rate));
_reflectionBalance[recipient] = _reflectionBalance[recipient].add(transferAmount.mul(rate));
//if any account belongs to the excludedAccount transfer token
if (_isExcluded[sender]) {
_tokenBalance[sender] = _tokenBalance[sender].sub(amount);
}
if (_isExcluded[recipient]) {
_tokenBalance[recipient] = _tokenBalance[recipient].add(transferAmount);
emit Transfer(sender, recipient, transferAmount);
return;
}
emit Transfer(sender, recipient, transferAmount);
}
function collectFee(address account, uint256 amount, uint256 rate) private returns (uint256) {
uint256 transferAmount = amount;
//@dev tax fee
if(_taxFee != 0){
uint256 taxFee = amount.mul(_taxFee).div(10**(_feeDecimal + 2));
transferAmount = transferAmount.sub(taxFee);
_reflectionTotal = _reflectionTotal.sub(taxFee.mul(rate));
_taxFeeTotal = _taxFeeTotal.add(taxFee);
}
//@dev liquidity fee
if(_liquidityFee != 0){
uint256 liquidityFee = amount.mul(_liquidityFee).div(10**(_feeDecimal + 2));
transferAmount = transferAmount.sub(liquidityFee);
_reflectionBalance[address(this)] = _reflectionBalance[address(this)].add(liquidityFee.mul(rate));
if(_isExcluded[address(this)]){
_tokenBalance[address(this)] = _tokenBalance[address(this)].add(liquidityFee);
}
_liquidityFeeTotal = _liquidityFeeTotal.add(liquidityFee);
emit Transfer(account,address(this),liquidityFee);
}
if(_burnFee != 0){
uint256 burnFee = amount.mul(_burnFee).div(10**(_feeDecimal + 2));
transferAmount = transferAmount.sub(burnFee);
_tokenTotal = _tokenTotal.sub(burnFee);
_reflectionBalance[DEAD] = _reflectionBalance[DEAD].add(burnFee.mul(rate));
if (_isExcluded[DEAD]) {
_tokenBalance[DEAD] = _tokenBalance[DEAD].add(burnFee);
}
_reflectionTotal = _reflectionTotal.sub(burnFee.mul(rate));
_burnFeeTotal = _burnFeeTotal.add(burnFee);
emit Transfer(account,DEAD,burnFee);
}
return transferAmount;
}
function _getReflectionRate() private view returns (uint256) {
uint256 reflectionSupply = _reflectionTotal;
uint256 tokenSupply = _tokenTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (
_reflectionBalance[_excluded[i]] > reflectionSupply ||
_tokenBalance[_excluded[i]] > tokenSupply
) return _reflectionTotal.div(_tokenTotal);
reflectionSupply = reflectionSupply.sub(
_reflectionBalance[_excluded[i]]
);
tokenSupply = tokenSupply.sub(_tokenBalance[_excluded[i]]);
}
if (reflectionSupply < _reflectionTotal.div(_tokenTotal))
return _reflectionTotal.div(_tokenTotal);
return reflectionSupply.div(tokenSupply);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
if(contractTokenBalance > maxTxAmount){
contractTokenBalance = maxTxAmount;
}
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(contractTokenBalance); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
payable(liquidityWallet).transfer(newBalance);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function setPair(address pair) external onlyOwner {
uniswapV2Pair = pair;
}
function setTaxless(address account, bool value) external onlyOwner {
isTaxless[account] = value;
}
function setSwapAndLiquifyEnabled(bool enabled) external onlyOwner {
swapAndLiquifyEnabled = enabled;
SwapAndLiquifyEnabledUpdated(enabled);
}
function setFeeActive(bool value) external onlyOwner {
isFeeActive = value;
}
function setTaxFee(uint256 fee) external onlyOwner {
_taxFee = fee;
}
function setBurnFee(uint256 fee) external onlyOwner {
_burnFee = fee;
}
function setLiquidityFee(uint256 fee) external onlyOwner {
_liquidityFee = fee;
}
function setMaxTxAmount(uint256 amount) external onlyOwner {
maxTxAmount = amount;
}
function setMinTokensBeforeSwap(uint256 amount) external onlyOwner {
minTokensBeforeSwap = amount;
}
receive() external payable {}
}