Contract Name:
BrawlerBearzBattlePassSeason3
Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "erc721a/contracts/extensions/ERC721AQueryable.sol";
import "erc721a/contracts/extensions/ERC721ABurnable.sol";
import {IBrawlerBearzDynamicItems} from "./interfaces/IBrawlerBearzDynamicItems.sol";
import "./tunnel/FxBaseRootTunnel.sol";
/*******************************************************************************
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|(@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|,|@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&&@@@@@@@@@@@|,*|&@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%,**%@@@@@@@@%|******%&@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&##*****|||**,(%%%%%**|%@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@***,#%%%%**#&@@@@@#**,|@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@*,(@@@@@@@@@@**,(&@@@@#**%@@@@@@||(%@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@%|,****&@((@&***&@@@@@@%||||||||#%&@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@&%#*****||||||**#%&@%%||||||||#@&%#(@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@&**,(&@@@@@%|||||*##&&&&##|||||(%@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@**,%@@@@@@@(|*|#%@@@@@@@@#||#%%@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@#||||#@@@@||*|%@@@@@@@@&|||%%&@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@#,,,,,,*|**||%|||||||###&@@@@@@@#|||#%@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@&#||*|||||%%%@%%%#|||%@@@@@@@@&(|(%&@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@&&%%(||||@@@@@@&|||||(%&((||(#%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@%%(||||||||||#%#(|||||%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@&%#######%%@@**||(#%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%##%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
********************************************************************************/
/**
* @title BrawlerBearzBattlePassSeason3
* @author @scottybmitch
* @dev Battle pass public mint and L2 sync on mint, non-transferable, or sellable
*/
contract BrawlerBearzBattlePassSeason3 is
FxBaseRootTunnel,
ERC721AQueryable,
ERC721ABurnable,
Ownable
{
using Strings for uint256;
/// @dev Sync actions
bytes32 public constant MINTED = keccak256("MINTED");
bytes32 public constant REWARDS_CLAIM = keccak256("REWARDS_CLAIM");
/// @notice Vendor contract
IBrawlerBearzDynamicItems public vendorContract;
// @dev Base uri for the nft
string private baseURI =
"ipfs://bafybeibcjnairw3alc65whtvcy7vosjion5csp5zctn7e4gehbqb77kbye/";
/// @notice Pro battle pass tier
uint256 constant PRO_PASS = 1;
/// @notice Pro pass mint price
uint256 public proPrice = 0.03 ether;
// @dev Treasury
address public treasury =
payable(0x39bfA2b4319581bc885A2d4b9F0C90C2e1c24B87);
/*
* @notice All mints live ~ July 12th, 12PM EST
* @dev Mints go live date
*/
uint256 public liveAt = 1689177600;
/*
* @notice All mints expired ~ July 29th, 12PM EST
* @dev Mints expire at
*/
uint256 public expiresAt = 1690646400;
/// @dev Thrown on approval
error CannotApproveAll();
/// @dev Thrown on transfer
error Nontransferable();
modifier mintIsActive() {
require(
block.timestamp > liveAt && block.timestamp < expiresAt,
"Minting is not active."
);
_;
}
constructor(
address _checkpointManager,
address _fxRoot,
address _vendorContractAddress
)
FxBaseRootTunnel(_checkpointManager, _fxRoot)
ERC721A("Brawler Bearz Battle Pass: S3", "BBBPS3")
{
vendorContract = IBrawlerBearzDynamicItems(_vendorContractAddress);
}
/**
* @notice Pro pass mints
* @param _amount The amount of passes to mint
**/
function proPassMint(uint256 _amount) external payable mintIsActive {
require(msg.value >= _amount * proPrice, "Not enough funds.");
address to = _msgSender();
// Mint passes
_mint(to, _amount);
// Mint a synthesizer per mint
uint256[] memory itemIds = new uint256[](_amount);
for (uint256 i; i < _amount; i++) {
itemIds[i] = 211; // Synthesizer item id
}
vendorContract.dropItems(to, itemIds);
// Sync w/ child
_sendMessageToChild(
abi.encode(
MINTED,
abi.encode(to, _nextTokenId(), PRO_PASS, _amount)
)
);
}
/**
* @notice Returns the URI for a given token id
* @param _tokenId A tokenId
*/
function tokenURI(uint256 _tokenId)
public
view
override
returns (string memory)
{
if (!_exists(_tokenId)) revert OwnerQueryForNonexistentToken();
return string(abi.encodePacked(baseURI, Strings.toString(PRO_PASS)));
}
// @dev Check if mint is live
function isLive() public view returns (bool) {
return block.timestamp > liveAt && block.timestamp < expiresAt;
}
// @dev Returns the starting token ID.
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
/**
* @notice Sets pro price
* @param _proPrice A base uri
*/
function setProPrice(uint256 _proPrice) external onlyOwner {
proPrice = _proPrice;
}
/**
* @notice Sets the base URI of the NFT
* @param _baseURI A base uri
*/
function setBaseURI(string calldata _baseURI) external onlyOwner {
baseURI = _baseURI;
}
/**
* @notice Sets timestamps for live and expires timeframe
* @param _liveAt A unix timestamp for live date
* @param _expiresAt A unix timestamp for expiration date
*/
function setMintWindow(uint256 _liveAt, uint256 _expiresAt)
external
onlyOwner
{
liveAt = _liveAt;
expiresAt = _expiresAt;
}
/**
* @notice Sets the treasury recipient
* @param _treasury The treasury address
*/
function setTreasury(address _treasury) public onlyOwner {
treasury = payable(_treasury);
}
/**
* Set FxChildTunnel
* @param _fxChildTunnel - the fxChildTunnel address
*/
function setFxChildTunnel(address _fxChildTunnel)
public
override
onlyOwner
{
fxChildTunnel = _fxChildTunnel;
}
/**
* @notice Sets the bearz vendor item contract
* @dev only owner call this function
* @param _vendorContractAddress The new contract address
*/
function setVendorContractAddress(address _vendorContractAddress)
external
onlyOwner
{
vendorContract = IBrawlerBearzDynamicItems(_vendorContractAddress);
}
/// @notice Withdraws funds from contract
function withdraw() public onlyOwner {
(bool success, ) = treasury.call{value: address(this).balance}("");
require(success, "999");
}
/// @dev Prevent approvals of token
function setApprovalForAll(address, bool) public virtual override {
revert CannotApproveAll();
}
/// @dev Prevent token transfer unless burning
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal override(ERC721A) {
if (to != address(0) && from != address(0)) {
revert Nontransferable();
}
super._beforeTokenTransfers(from, to, startTokenId, quantity);
}
function _processRewardsClaim(bytes memory data) internal {
(address to, uint256[] memory itemIds) = abi.decode(
data,
(address, uint256[])
);
vendorContract.dropItems(to, itemIds);
}
/// @dev TEST
function _processMessageFromChildTest(bytes memory message)
external
onlyOwner
{
(bytes32 syncType, bytes memory syncData) = abi.decode(
message,
(bytes32, bytes)
);
if (syncType == REWARDS_CLAIM) {
_processRewardsClaim(syncData);
} else {
revert("INVALID_SYNC_TYPE");
}
}
function _processMessageFromChild(bytes memory message) internal override {
(bytes32 syncType, bytes memory syncData) = abi.decode(
message,
(bytes32, bytes)
);
if (syncType == REWARDS_CLAIM) {
_processRewardsClaim(syncData);
} else {
revert("INVALID_SYNC_TYPE");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721AQueryable.sol';
import '../ERC721A.sol';
/**
* @title ERC721A Queryable
* @dev ERC721A subclass with convenience query functions.
*/
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
* - `extraData` = `0`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
* - `extraData` = `<Extra data when token was burned>`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
* - `extraData` = `<Extra data at start of ownership>`
*/
function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) {
TokenOwnership memory ownership;
if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {
return ownership;
}
ownership = _ownershipAt(tokenId);
if (ownership.burned) {
return ownership;
}
return _ownershipOf(tokenId);
}
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) {
unchecked {
uint256 tokenIdsLength = tokenIds.length;
TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
for (uint256 i; i != tokenIdsLength; ++i) {
ownerships[i] = explicitOwnershipOf(tokenIds[i]);
}
return ownerships;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view override returns (uint256[] memory) {
unchecked {
if (start >= stop) revert InvalidQueryRange();
uint256 tokenIdsIdx;
uint256 stopLimit = _nextTokenId();
// Set `start = max(start, _startTokenId())`.
if (start < _startTokenId()) {
start = _startTokenId();
}
// Set `stop = min(stop, stopLimit)`.
if (stop > stopLimit) {
stop = stopLimit;
}
uint256 tokenIdsMaxLength = balanceOf(owner);
// Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
// to cater for cases where `balanceOf(owner)` is too big.
if (start < stop) {
uint256 rangeLength = stop - start;
if (rangeLength < tokenIdsMaxLength) {
tokenIdsMaxLength = rangeLength;
}
} else {
tokenIdsMaxLength = 0;
}
uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
if (tokenIdsMaxLength == 0) {
return tokenIds;
}
// We need to call `explicitOwnershipOf(start)`,
// because the slot at `start` may not be initialized.
TokenOwnership memory ownership = explicitOwnershipOf(start);
address currOwnershipAddr;
// If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
// `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
if (!ownership.burned) {
currOwnershipAddr = ownership.addr;
}
for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
// Downsize the array to fit.
assembly {
mstore(tokenIds, tokenIdsIdx)
}
return tokenIds;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view override returns (uint256[] memory) {
unchecked {
uint256 tokenIdsIdx;
address currOwnershipAddr;
uint256 tokenIdsLength = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenIdsLength);
TokenOwnership memory ownership;
for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
return tokenIds;
}
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721ABurnable.sol';
import '../ERC721A.sol';
/**
* @title ERC721A Burnable Token
* @dev ERC721A Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721ABurnable is ERC721A, IERC721ABurnable {
/**
* @dev Burns `tokenId`. See {ERC721A-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual override {
_burn(tokenId, true);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts-upgradeable/token/ERC1155/IERC1155Upgradeable.sol";
interface IBrawlerBearzDynamicItems is IERC1155Upgradeable {
struct CustomMetadata {
string typeOf;
string name;
uint256 xp; // Min XP required to equip
string rarity; // LEGENDARY, SUPER_RARE, RARE, UNCOMMON, COMMON
uint256 atk; // Correlated to Strength
uint256 def; // Correlated to Endurance
uint256 usageChance; // DEPRECATED
string usageDuration; // PERSISTENT - equipable items, TEMPORARY - battles, ONE-TIME - buffs
string description;
uint256 intel; // Correlated to intellgience
uint256 luck; // Correlated to luck
}
function getMetadata(uint256 tokenId)
external
view
returns (CustomMetadata memory);
function getMetadataBatch(uint256[] calldata tokenIds)
external
view
returns (CustomMetadata[] memory);
function getItemType(uint256 tokenId) external view returns (string memory);
function getItemName(uint256 tokenId) external view returns (string memory);
function getItemXPReq(uint256 tokenId) external view returns (uint256);
function setItemMetadata(
uint256 tokenId,
string calldata typeOf,
string calldata name,
uint256 xp
) external;
function setItemMetadataStruct(
uint256 tokenId,
CustomMetadata memory metadata
) external;
function shopDrop(address _toAddress, uint256 _amount) external;
function dropItems(address _toAddress, uint256[] calldata itemIds) external;
function burnItemForOwnerAddress(
uint256 _typeId,
uint256 _quantity,
address _materialOwnerAddress
) external;
function mintItemToAddress(
uint256 _typeId,
uint256 _quantity,
address _toAddress
) external;
function mintBatchItemsToAddress(
uint256[] memory _typeIds,
uint256[] memory _quantities,
address _toAddress
) external;
function bulkSafeTransfer(
uint256 _typeId,
uint256 _quantityPerRecipient,
address[] calldata recipients
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {RLPReader} from "../lib/RLPReader.sol";
import {MerklePatriciaProof} from "../lib/MerklePatriciaProof.sol";
import {Merkle} from "../lib/Merkle.sol";
import "../lib/ExitPayloadReader.sol";
interface IFxStateSender {
function sendMessageToChild(address _receiver, bytes calldata _data)
external;
}
contract ICheckpointManager {
struct HeaderBlock {
bytes32 root;
uint256 start;
uint256 end;
uint256 createdAt;
address proposer;
}
/**
* @notice mapping of checkpoint header numbers to block details
* @dev These checkpoints are submited by plasma contracts
*/
mapping(uint256 => HeaderBlock) public headerBlocks;
}
abstract contract FxBaseRootTunnel {
using RLPReader for RLPReader.RLPItem;
using Merkle for bytes32;
using ExitPayloadReader for bytes;
using ExitPayloadReader for ExitPayloadReader.ExitPayload;
using ExitPayloadReader for ExitPayloadReader.Log;
using ExitPayloadReader for ExitPayloadReader.LogTopics;
using ExitPayloadReader for ExitPayloadReader.Receipt;
// keccak256(MessageSent(bytes))
bytes32 public constant SEND_MESSAGE_EVENT_SIG =
0x8c5261668696ce22758910d05bab8f186d6eb247ceac2af2e82c7dc17669b036;
// state sender contract
IFxStateSender public fxRoot;
// root chain manager
ICheckpointManager public checkpointManager;
// child tunnel contract which receives and sends messages
address public fxChildTunnel;
// storage to avoid duplicate exits
mapping(bytes32 => bool) public processedExits;
constructor(address _checkpointManager, address _fxRoot) {
checkpointManager = ICheckpointManager(_checkpointManager);
fxRoot = IFxStateSender(_fxRoot);
}
// set fxChildTunnel if not set already
function setFxChildTunnel(address _fxChildTunnel) public virtual {
require(
fxChildTunnel == address(0x0),
"FxBaseRootTunnel: CHILD_TUNNEL_ALREADY_SET"
);
fxChildTunnel = _fxChildTunnel;
}
/**
* @notice Send bytes message to Child Tunnel
* @param message bytes message that will be sent to Child Tunnel
* some message examples -
* abi.encode(tokenId);
* abi.encode(tokenId, tokenMetadata);
* abi.encode(messageType, messageData);
*/
function _sendMessageToChild(bytes memory message) internal {
fxRoot.sendMessageToChild(fxChildTunnel, message);
}
function _validateAndExtractMessage(bytes memory inputData)
internal
returns (bytes memory)
{
ExitPayloadReader.ExitPayload memory payload = inputData
.toExitPayload();
bytes memory branchMaskBytes = payload.getBranchMaskAsBytes();
uint256 blockNumber = payload.getBlockNumber();
// checking if exit has already been processed
// unique exit is identified using hash of (blockNumber, branchMask, receiptLogIndex)
bytes32 exitHash = keccak256(
abi.encodePacked(
blockNumber,
// first 2 nibbles are dropped while generating nibble array
// this allows branch masks that are valid but bypass exitHash check (changing first 2 nibbles only)
// so converting to nibble array and then hashing it
MerklePatriciaProof._getNibbleArray(branchMaskBytes),
payload.getReceiptLogIndex()
)
);
require(
processedExits[exitHash] == false,
"FxRootTunnel: EXIT_ALREADY_PROCESSED"
);
processedExits[exitHash] = true;
ExitPayloadReader.Receipt memory receipt = payload.getReceipt();
ExitPayloadReader.Log memory log = receipt.getLog();
// check child tunnel
require(
fxChildTunnel == log.getEmitter(),
"FxRootTunnel: INVALID_FX_CHILD_TUNNEL"
);
bytes32 receiptRoot = payload.getReceiptRoot();
// verify receipt inclusion
require(
MerklePatriciaProof.verify(
receipt.toBytes(),
branchMaskBytes,
payload.getReceiptProof(),
receiptRoot
),
"FxRootTunnel: INVALID_RECEIPT_PROOF"
);
// verify checkpoint inclusion
_checkBlockMembershipInCheckpoint(
blockNumber,
payload.getBlockTime(),
payload.getTxRoot(),
receiptRoot,
payload.getHeaderNumber(),
payload.getBlockProof()
);
ExitPayloadReader.LogTopics memory topics = log.getTopics();
require(
bytes32(topics.getField(0).toUint()) == SEND_MESSAGE_EVENT_SIG, // topic0 is event sig
"FxRootTunnel: INVALID_SIGNATURE"
);
// received message data
bytes memory message = abi.decode(log.getData(), (bytes)); // event decodes params again, so decoding bytes to get message
return message;
}
function _checkBlockMembershipInCheckpoint(
uint256 blockNumber,
uint256 blockTime,
bytes32 txRoot,
bytes32 receiptRoot,
uint256 headerNumber,
bytes memory blockProof
) private view returns (uint256) {
(
bytes32 headerRoot,
uint256 startBlock,
,
uint256 createdAt,
) = checkpointManager.headerBlocks(headerNumber);
require(
keccak256(
abi.encodePacked(blockNumber, blockTime, txRoot, receiptRoot)
).checkMembership(blockNumber - startBlock, headerRoot, blockProof),
"FxRootTunnel: INVALID_HEADER"
);
return createdAt;
}
/**
* @notice receive message from L2 to L1, validated by proof
* @dev This function verifies if the transaction actually happened on child chain
*
* @param inputData RLP encoded data of the reference tx containing following list of fields
* 0 - headerNumber - Checkpoint header block number containing the reference tx
* 1 - blockProof - Proof that the block header (in the child chain) is a leaf in the submitted merkle root
* 2 - blockNumber - Block number containing the reference tx on child chain
* 3 - blockTime - Reference tx block time
* 4 - txRoot - Transactions root of block
* 5 - receiptRoot - Receipts root of block
* 6 - receipt - Receipt of the reference transaction
* 7 - receiptProof - Merkle proof of the reference receipt
* 8 - branchMask - 32 bits denoting the path of receipt in merkle tree
* 9 - receiptLogIndex - Log Index to read from the receipt
*/
function receiveMessage(bytes memory inputData) public virtual {
bytes memory message = _validateAndExtractMessage(inputData);
_processMessageFromChild(message);
}
/**
* @notice Process message received from Child Tunnel
* @dev function needs to be implemented to handle message as per requirement
* This is called by onStateReceive function.
* Since it is called via a system call, any event will not be emitted during its execution.
* @param message bytes message that was sent from Child Tunnel
*/
function _processMessageFromChild(bytes memory message) internal virtual;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '../IERC721A.sol';
/**
* @dev Interface of an ERC721AQueryable compliant contract.
*/
interface IERC721AQueryable is IERC721A {
/**
* Invalid query range (`start` >= `stop`).
*/
error InvalidQueryRange();
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view returns (uint256[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view returns (uint256[] memory);
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
/**
* @dev ERC721 token receiver interface.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard,
* including the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at `_startTokenId()`
* (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Mask of an entry in packed address data.
uint256 private constant BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with `_mintERC2309`.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to `_mintERC2309`
// is required to cause an overflow, which is unrealistic.
uint256 private constant MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The tokenId of the next token to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See `_packedOwnershipOf` implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see `_totalMinted`.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to `_startTokenId()`
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view returns (uint256) {
return _burnCounter;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes of the XOR of
// all function selectors in the interface. See: https://eips.ethereum.org/EIPS/eip-165
// e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> BITPOS_NUMBER_MINTED) & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> BITPOS_NUMBER_BURNED) & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & BITMASK_AUX_COMPLEMENT) | (auxCasted << BITPOS_AUX);
_packedAddressData[owner] = packed;
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & BITMASK_BURNED == 0) {
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed is zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> BITPOS_START_TIMESTAMP);
ownership.burned = packed & BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> BITPOS_EXTRA_DATA);
}
/**
* Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, BITMASK_ADDRESS)
// `owner | (block.timestamp << BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << BITPOS_NEXT_INITIALIZED`.
result := shl(BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSenderERC721A()) revert ApproveToCaller();
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 tokenId = startTokenId;
uint256 end = startTokenId + quantity;
do {
emit Transfer(address(0), to, tokenId++);
} while (tokenId < end);
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
mapping(uint256 => address) storage tokenApprovalsPtr = _tokenApprovals;
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.
assembly {
// Compute the slot.
mstore(0x00, tokenId)
mstore(0x20, tokenApprovalsPtr.slot)
approvedAddressSlot := keccak256(0x00, 0x40)
// Load the slot's value from storage.
approvedAddress := sload(approvedAddressSlot)
}
}
/**
* @dev Returns whether the `approvedAddress` is equals to `from` or `msgSender`.
*/
function _isOwnerOrApproved(
address approvedAddress,
address from,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `from` to the lower 160 bits, in case the upper bits somehow aren't clean.
from := and(from, BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, BITMASK_ADDRESS)
// `msgSender == from || msgSender == approvedAddress`.
result := or(eq(msgSender, from), eq(msgSender, approvedAddress))
}
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(BITMASK_BURNED | BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << BITPOS_EXTRA_DATA;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred.
* This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred.
* This includes minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function _toString(uint256 value) internal pure returns (string memory ptr) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit),
// but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged.
// We will need 1 32-byte word to store the length,
// and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128.
ptr := add(mload(0x40), 128)
// Update the free memory pointer to allocate.
mstore(0x40, ptr)
// Cache the end of the memory to calculate the length later.
let end := ptr
// We write the string from the rightmost digit to the leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// Costs a bit more than early returning for the zero case,
// but cheaper in terms of deployment and overall runtime costs.
for {
// Initialize and perform the first pass without check.
let temp := value
// Move the pointer 1 byte leftwards to point to an empty character slot.
ptr := sub(ptr, 1)
// Write the character to the pointer. 48 is the ASCII index of '0'.
mstore8(ptr, add(48, mod(temp, 10)))
temp := div(temp, 10)
} temp {
// Keep dividing `temp` until zero.
temp := div(temp, 10)
} {
// Body of the for loop.
ptr := sub(ptr, 1)
mstore8(ptr, add(48, mod(temp, 10)))
}
let length := sub(end, ptr)
// Move the pointer 32 bytes leftwards to make room for the length.
ptr := sub(ptr, 32)
// Store the length.
mstore(ptr, length)
}
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set through `_extraData`.
uint24 extraData;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
// ==============================
// IERC165
// ==============================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// ==============================
// IERC721
// ==============================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// ==============================
// IERC721Metadata
// ==============================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// ==============================
// IERC2309
// ==============================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId` (inclusive) is transferred from `from` to `to`,
* as defined in the ERC2309 standard. See `_mintERC2309` for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '../IERC721A.sol';
/**
* @dev Interface of an ERC721ABurnable compliant contract.
*/
interface IERC721ABurnable is IERC721A {
/**
* @dev Burns `tokenId`. See {ERC721A-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/*
* @author Hamdi Allam [email protected]
* Please reach out with any questions or concerns
*/
pragma solidity ^0.8.0;
library RLPReader {
uint8 constant STRING_SHORT_START = 0x80;
uint8 constant STRING_LONG_START = 0xb8;
uint8 constant LIST_SHORT_START = 0xc0;
uint8 constant LIST_LONG_START = 0xf8;
uint8 constant WORD_SIZE = 32;
struct RLPItem {
uint256 len;
uint256 memPtr;
}
struct Iterator {
RLPItem item; // Item that's being iterated over.
uint256 nextPtr; // Position of the next item in the list.
}
/*
* @dev Returns the next element in the iteration. Reverts if it has not next element.
* @param self The iterator.
* @return The next element in the iteration.
*/
function next(Iterator memory self) internal pure returns (RLPItem memory) {
require(hasNext(self));
uint256 ptr = self.nextPtr;
uint256 itemLength = _itemLength(ptr);
self.nextPtr = ptr + itemLength;
return RLPItem(itemLength, ptr);
}
/*
* @dev Returns true if the iteration has more elements.
* @param self The iterator.
* @return true if the iteration has more elements.
*/
function hasNext(Iterator memory self) internal pure returns (bool) {
RLPItem memory item = self.item;
return self.nextPtr < item.memPtr + item.len;
}
/*
* @param item RLP encoded bytes
*/
function toRlpItem(bytes memory item) internal pure returns (RLPItem memory) {
uint256 memPtr;
assembly {
memPtr := add(item, 0x20)
}
return RLPItem(item.length, memPtr);
}
/*
* @dev Create an iterator. Reverts if item is not a list.
* @param self The RLP item.
* @return An 'Iterator' over the item.
*/
function iterator(RLPItem memory self) internal pure returns (Iterator memory) {
require(isList(self));
uint256 ptr = self.memPtr + _payloadOffset(self.memPtr);
return Iterator(self, ptr);
}
/*
* @param item RLP encoded bytes
*/
function rlpLen(RLPItem memory item) internal pure returns (uint256) {
return item.len;
}
/*
* @param item RLP encoded bytes
*/
function payloadLen(RLPItem memory item) internal pure returns (uint256) {
return item.len - _payloadOffset(item.memPtr);
}
/*
* @param item RLP encoded list in bytes
*/
function toList(RLPItem memory item) internal pure returns (RLPItem[] memory) {
require(isList(item));
uint256 items = numItems(item);
RLPItem[] memory result = new RLPItem[](items);
uint256 memPtr = item.memPtr + _payloadOffset(item.memPtr);
uint256 dataLen;
for (uint256 i = 0; i < items; i++) {
dataLen = _itemLength(memPtr);
result[i] = RLPItem(dataLen, memPtr);
memPtr = memPtr + dataLen;
}
return result;
}
// @return indicator whether encoded payload is a list. negate this function call for isData.
function isList(RLPItem memory item) internal pure returns (bool) {
if (item.len == 0) return false;
uint8 byte0;
uint256 memPtr = item.memPtr;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < LIST_SHORT_START) return false;
return true;
}
/*
* @dev A cheaper version of keccak256(toRlpBytes(item)) that avoids copying memory.
* @return keccak256 hash of RLP encoded bytes.
*/
function rlpBytesKeccak256(RLPItem memory item) internal pure returns (bytes32) {
uint256 ptr = item.memPtr;
uint256 len = item.len;
bytes32 result;
assembly {
result := keccak256(ptr, len)
}
return result;
}
function payloadLocation(RLPItem memory item) internal pure returns (uint256, uint256) {
uint256 offset = _payloadOffset(item.memPtr);
uint256 memPtr = item.memPtr + offset;
uint256 len = item.len - offset; // data length
return (memPtr, len);
}
/*
* @dev A cheaper version of keccak256(toBytes(item)) that avoids copying memory.
* @return keccak256 hash of the item payload.
*/
function payloadKeccak256(RLPItem memory item) internal pure returns (bytes32) {
(uint256 memPtr, uint256 len) = payloadLocation(item);
bytes32 result;
assembly {
result := keccak256(memPtr, len)
}
return result;
}
/** RLPItem conversions into data types **/
// @returns raw rlp encoding in bytes
function toRlpBytes(RLPItem memory item) internal pure returns (bytes memory) {
bytes memory result = new bytes(item.len);
if (result.length == 0) return result;
uint256 ptr;
assembly {
ptr := add(0x20, result)
}
copy(item.memPtr, ptr, item.len);
return result;
}
// any non-zero byte is considered true
function toBoolean(RLPItem memory item) internal pure returns (bool) {
require(item.len == 1);
uint256 result;
uint256 memPtr = item.memPtr;
assembly {
result := byte(0, mload(memPtr))
}
return result == 0 ? false : true;
}
function toAddress(RLPItem memory item) internal pure returns (address) {
// 1 byte for the length prefix
require(item.len == 21);
return address(uint160(toUint(item)));
}
function toUint(RLPItem memory item) internal pure returns (uint256) {
require(item.len > 0 && item.len <= 33);
uint256 offset = _payloadOffset(item.memPtr);
uint256 len = item.len - offset;
uint256 result;
uint256 memPtr = item.memPtr + offset;
assembly {
result := mload(memPtr)
// shfit to the correct location if neccesary
if lt(len, 32) {
result := div(result, exp(256, sub(32, len)))
}
}
return result;
}
// enforces 32 byte length
function toUintStrict(RLPItem memory item) internal pure returns (uint256) {
// one byte prefix
require(item.len == 33);
uint256 result;
uint256 memPtr = item.memPtr + 1;
assembly {
result := mload(memPtr)
}
return result;
}
function toBytes(RLPItem memory item) internal pure returns (bytes memory) {
require(item.len > 0);
uint256 offset = _payloadOffset(item.memPtr);
uint256 len = item.len - offset; // data length
bytes memory result = new bytes(len);
uint256 destPtr;
assembly {
destPtr := add(0x20, result)
}
copy(item.memPtr + offset, destPtr, len);
return result;
}
/*
* Private Helpers
*/
// @return number of payload items inside an encoded list.
function numItems(RLPItem memory item) private pure returns (uint256) {
if (item.len == 0) return 0;
uint256 count = 0;
uint256 currPtr = item.memPtr + _payloadOffset(item.memPtr);
uint256 endPtr = item.memPtr + item.len;
while (currPtr < endPtr) {
currPtr = currPtr + _itemLength(currPtr); // skip over an item
count++;
}
return count;
}
// @return entire rlp item byte length
function _itemLength(uint256 memPtr) private pure returns (uint256) {
uint256 itemLen;
uint256 byte0;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < STRING_SHORT_START) itemLen = 1;
else if (byte0 < STRING_LONG_START) itemLen = byte0 - STRING_SHORT_START + 1;
else if (byte0 < LIST_SHORT_START) {
assembly {
let byteLen := sub(byte0, 0xb7) // # of bytes the actual length is
memPtr := add(memPtr, 1) // skip over the first byte
/* 32 byte word size */
let dataLen := div(mload(memPtr), exp(256, sub(32, byteLen))) // right shifting to get the len
itemLen := add(dataLen, add(byteLen, 1))
}
} else if (byte0 < LIST_LONG_START) {
itemLen = byte0 - LIST_SHORT_START + 1;
} else {
assembly {
let byteLen := sub(byte0, 0xf7)
memPtr := add(memPtr, 1)
let dataLen := div(mload(memPtr), exp(256, sub(32, byteLen))) // right shifting to the correct length
itemLen := add(dataLen, add(byteLen, 1))
}
}
return itemLen;
}
// @return number of bytes until the data
function _payloadOffset(uint256 memPtr) private pure returns (uint256) {
uint256 byte0;
assembly {
byte0 := byte(0, mload(memPtr))
}
if (byte0 < STRING_SHORT_START) return 0;
else if (byte0 < STRING_LONG_START || (byte0 >= LIST_SHORT_START && byte0 < LIST_LONG_START)) return 1;
else if (byte0 < LIST_SHORT_START)
// being explicit
return byte0 - (STRING_LONG_START - 1) + 1;
else return byte0 - (LIST_LONG_START - 1) + 1;
}
/*
* @param src Pointer to source
* @param dest Pointer to destination
* @param len Amount of memory to copy from the source
*/
function copy(
uint256 src,
uint256 dest,
uint256 len
) private pure {
if (len == 0) return;
// copy as many word sizes as possible
for (; len >= WORD_SIZE; len -= WORD_SIZE) {
assembly {
mstore(dest, mload(src))
}
src += WORD_SIZE;
dest += WORD_SIZE;
}
if (len == 0) return;
// left over bytes. Mask is used to remove unwanted bytes from the word
uint256 mask = 256**(WORD_SIZE - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask)) // zero out src
let destpart := and(mload(dest), mask) // retrieve the bytes
mstore(dest, or(destpart, srcpart))
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {RLPReader} from "./RLPReader.sol";
library MerklePatriciaProof {
/*
* @dev Verifies a merkle patricia proof.
* @param value The terminating value in the trie.
* @param encodedPath The path in the trie leading to value.
* @param rlpParentNodes The rlp encoded stack of nodes.
* @param root The root hash of the trie.
* @return The boolean validity of the proof.
*/
function verify(
bytes memory value,
bytes memory encodedPath,
bytes memory rlpParentNodes,
bytes32 root
) internal pure returns (bool) {
RLPReader.RLPItem memory item = RLPReader.toRlpItem(rlpParentNodes);
RLPReader.RLPItem[] memory parentNodes = RLPReader.toList(item);
bytes memory currentNode;
RLPReader.RLPItem[] memory currentNodeList;
bytes32 nodeKey = root;
uint256 pathPtr = 0;
bytes memory path = _getNibbleArray(encodedPath);
if (path.length == 0) {
return false;
}
for (uint256 i = 0; i < parentNodes.length; i++) {
if (pathPtr > path.length) {
return false;
}
currentNode = RLPReader.toRlpBytes(parentNodes[i]);
if (nodeKey != keccak256(currentNode)) {
return false;
}
currentNodeList = RLPReader.toList(parentNodes[i]);
if (currentNodeList.length == 17) {
if (pathPtr == path.length) {
if (keccak256(RLPReader.toBytes(currentNodeList[16])) == keccak256(value)) {
return true;
} else {
return false;
}
}
uint8 nextPathNibble = uint8(path[pathPtr]);
if (nextPathNibble > 16) {
return false;
}
nodeKey = bytes32(RLPReader.toUintStrict(currentNodeList[nextPathNibble]));
pathPtr += 1;
} else if (currentNodeList.length == 2) {
uint256 traversed = _nibblesToTraverse(RLPReader.toBytes(currentNodeList[0]), path, pathPtr);
if (pathPtr + traversed == path.length) {
//leaf node
if (keccak256(RLPReader.toBytes(currentNodeList[1])) == keccak256(value)) {
return true;
} else {
return false;
}
}
//extension node
if (traversed == 0) {
return false;
}
pathPtr += traversed;
nodeKey = bytes32(RLPReader.toUintStrict(currentNodeList[1]));
} else {
return false;
}
}
}
function _nibblesToTraverse(
bytes memory encodedPartialPath,
bytes memory path,
uint256 pathPtr
) private pure returns (uint256) {
uint256 len = 0;
// encodedPartialPath has elements that are each two hex characters (1 byte), but partialPath
// and slicedPath have elements that are each one hex character (1 nibble)
bytes memory partialPath = _getNibbleArray(encodedPartialPath);
bytes memory slicedPath = new bytes(partialPath.length);
// pathPtr counts nibbles in path
// partialPath.length is a number of nibbles
for (uint256 i = pathPtr; i < pathPtr + partialPath.length; i++) {
bytes1 pathNibble = path[i];
slicedPath[i - pathPtr] = pathNibble;
}
if (keccak256(partialPath) == keccak256(slicedPath)) {
len = partialPath.length;
} else {
len = 0;
}
return len;
}
// bytes b must be hp encoded
function _getNibbleArray(bytes memory b) internal pure returns (bytes memory) {
bytes memory nibbles = "";
if (b.length > 0) {
uint8 offset;
uint8 hpNibble = uint8(_getNthNibbleOfBytes(0, b));
if (hpNibble == 1 || hpNibble == 3) {
nibbles = new bytes(b.length * 2 - 1);
bytes1 oddNibble = _getNthNibbleOfBytes(1, b);
nibbles[0] = oddNibble;
offset = 1;
} else {
nibbles = new bytes(b.length * 2 - 2);
offset = 0;
}
for (uint256 i = offset; i < nibbles.length; i++) {
nibbles[i] = _getNthNibbleOfBytes(i - offset + 2, b);
}
}
return nibbles;
}
function _getNthNibbleOfBytes(uint256 n, bytes memory str) private pure returns (bytes1) {
return bytes1(n % 2 == 0 ? uint8(str[n / 2]) / 0x10 : uint8(str[n / 2]) % 0x10);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library Merkle {
function checkMembership(
bytes32 leaf,
uint256 index,
bytes32 rootHash,
bytes memory proof
) internal pure returns (bool) {
require(proof.length % 32 == 0, "Invalid proof length");
uint256 proofHeight = proof.length / 32;
// Proof of size n means, height of the tree is n+1.
// In a tree of height n+1, max #leafs possible is 2 ^ n
require(index < 2**proofHeight, "Leaf index is too big");
bytes32 proofElement;
bytes32 computedHash = leaf;
for (uint256 i = 32; i <= proof.length; i += 32) {
assembly {
proofElement := mload(add(proof, i))
}
if (index % 2 == 0) {
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
index = index / 2;
}
return computedHash == rootHash;
}
}
pragma solidity ^0.8.0;
import {RLPReader} from "./RLPReader.sol";
library ExitPayloadReader {
using RLPReader for bytes;
using RLPReader for RLPReader.RLPItem;
uint8 constant WORD_SIZE = 32;
struct ExitPayload {
RLPReader.RLPItem[] data;
}
struct Receipt {
RLPReader.RLPItem[] data;
bytes raw;
uint256 logIndex;
}
struct Log {
RLPReader.RLPItem data;
RLPReader.RLPItem[] list;
}
struct LogTopics {
RLPReader.RLPItem[] data;
}
// copy paste of private copy() from RLPReader to avoid changing of existing contracts
function copy(
uint256 src,
uint256 dest,
uint256 len
) private pure {
if (len == 0) return;
// copy as many word sizes as possible
for (; len >= WORD_SIZE; len -= WORD_SIZE) {
assembly {
mstore(dest, mload(src))
}
src += WORD_SIZE;
dest += WORD_SIZE;
}
// left over bytes. Mask is used to remove unwanted bytes from the word
uint256 mask = 256**(WORD_SIZE - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask)) // zero out src
let destpart := and(mload(dest), mask) // retrieve the bytes
mstore(dest, or(destpart, srcpart))
}
}
function toExitPayload(bytes memory data) internal pure returns (ExitPayload memory) {
RLPReader.RLPItem[] memory payloadData = data.toRlpItem().toList();
return ExitPayload(payloadData);
}
function getHeaderNumber(ExitPayload memory payload) internal pure returns (uint256) {
return payload.data[0].toUint();
}
function getBlockProof(ExitPayload memory payload) internal pure returns (bytes memory) {
return payload.data[1].toBytes();
}
function getBlockNumber(ExitPayload memory payload) internal pure returns (uint256) {
return payload.data[2].toUint();
}
function getBlockTime(ExitPayload memory payload) internal pure returns (uint256) {
return payload.data[3].toUint();
}
function getTxRoot(ExitPayload memory payload) internal pure returns (bytes32) {
return bytes32(payload.data[4].toUint());
}
function getReceiptRoot(ExitPayload memory payload) internal pure returns (bytes32) {
return bytes32(payload.data[5].toUint());
}
function getReceipt(ExitPayload memory payload) internal pure returns (Receipt memory receipt) {
receipt.raw = payload.data[6].toBytes();
RLPReader.RLPItem memory receiptItem = receipt.raw.toRlpItem();
if (receiptItem.isList()) {
// legacy tx
receipt.data = receiptItem.toList();
} else {
// pop first byte before parsting receipt
bytes memory typedBytes = receipt.raw;
bytes memory result = new bytes(typedBytes.length - 1);
uint256 srcPtr;
uint256 destPtr;
assembly {
srcPtr := add(33, typedBytes)
destPtr := add(0x20, result)
}
copy(srcPtr, destPtr, result.length);
receipt.data = result.toRlpItem().toList();
}
receipt.logIndex = getReceiptLogIndex(payload);
return receipt;
}
function getReceiptProof(ExitPayload memory payload) internal pure returns (bytes memory) {
return payload.data[7].toBytes();
}
function getBranchMaskAsBytes(ExitPayload memory payload) internal pure returns (bytes memory) {
return payload.data[8].toBytes();
}
function getBranchMaskAsUint(ExitPayload memory payload) internal pure returns (uint256) {
return payload.data[8].toUint();
}
function getReceiptLogIndex(ExitPayload memory payload) internal pure returns (uint256) {
return payload.data[9].toUint();
}
// Receipt methods
function toBytes(Receipt memory receipt) internal pure returns (bytes memory) {
return receipt.raw;
}
function getLog(Receipt memory receipt) internal pure returns (Log memory) {
RLPReader.RLPItem memory logData = receipt.data[3].toList()[receipt.logIndex];
return Log(logData, logData.toList());
}
// Log methods
function getEmitter(Log memory log) internal pure returns (address) {
return RLPReader.toAddress(log.list[0]);
}
function getTopics(Log memory log) internal pure returns (LogTopics memory) {
return LogTopics(log.list[1].toList());
}
function getData(Log memory log) internal pure returns (bytes memory) {
return log.list[2].toBytes();
}
function toRlpBytes(Log memory log) internal pure returns (bytes memory) {
return log.data.toRlpBytes();
}
// LogTopics methods
function getField(LogTopics memory topics, uint256 index) internal pure returns (RLPReader.RLPItem memory) {
return topics.data[index];
}
}