Contract Name:
AAVEDNTVault
Contract Source Code:
// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity 0.8.10;
import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';
/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
/// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
/// also when the token returns `false`.
function safeTransfer(IERC20 token, address to, uint256 value) internal {
bytes4 selector_ = token.transfer.selector;
// solhint-disable-next-line no-inline-assembly
assembly {
let freeMemoryPointer := mload(0x40)
mstore(freeMemoryPointer, selector_)
mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
mstore(add(freeMemoryPointer, 36), value)
if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
returndatacopy(0, 0, returndatasize())
revert(0, returndatasize())
}
}
require(getLastTransferResult(token), 'GPv2: failed transfer');
}
/// @dev Wrapper around a call to the ERC20 function `transferFrom` that
/// reverts also when the token returns `false`.
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
bytes4 selector_ = token.transferFrom.selector;
// solhint-disable-next-line no-inline-assembly
assembly {
let freeMemoryPointer := mload(0x40)
mstore(freeMemoryPointer, selector_)
mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
mstore(add(freeMemoryPointer, 68), value)
if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
returndatacopy(0, 0, returndatasize())
revert(0, returndatasize())
}
}
require(getLastTransferResult(token), 'GPv2: failed transferFrom');
}
/// @dev Verifies that the last return was a successful `transfer*` call.
/// This is done by checking that the return data is either empty, or
/// is a valid ABI encoded boolean.
function getLastTransferResult(IERC20 token) private view returns (bool success) {
// NOTE: Inspecting previous return data requires assembly. Note that
// we write the return data to memory 0 in the case where the return
// data size is 32, this is OK since the first 64 bytes of memory are
// reserved by Solidy as a scratch space that can be used within
// assembly blocks.
// <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
// solhint-disable-next-line no-inline-assembly
assembly {
/// @dev Revert with an ABI encoded Solidity error with a message
/// that fits into 32-bytes.
///
/// An ABI encoded Solidity error has the following memory layout:
///
/// ------------+----------------------------------
/// byte range | value
/// ------------+----------------------------------
/// 0x00..0x04 | selector("Error(string)")
/// 0x04..0x24 | string offset (always 0x20)
/// 0x24..0x44 | string length
/// 0x44..0x64 | string value, padded to 32-bytes
function revertWithMessage(length, message) {
mstore(0x00, '\x08\xc3\x79\xa0')
mstore(0x04, 0x20)
mstore(0x24, length)
mstore(0x44, message)
revert(0x00, 0x64)
}
switch returndatasize()
// Non-standard ERC20 transfer without return.
case 0 {
// NOTE: When the return data size is 0, verify that there
// is code at the address. This is done in order to maintain
// compatibility with Solidity calling conventions.
// <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
if iszero(extcodesize(token)) {
revertWithMessage(20, 'GPv2: not a contract')
}
success := 1
}
// Standard ERC20 transfer returning boolean success value.
case 32 {
returndatacopy(0, 0, returndatasize())
// NOTE: For ABI encoding v1, any non-zero value is accepted
// as `true` for a boolean. In order to stay compatible with
// OpenZeppelin's `SafeERC20` library which is known to work
// with the existing ERC20 implementation we care about,
// make sure we return success for any non-zero return value
// from the `transfer*` call.
success := iszero(iszero(mload(0)))
}
default {
revertWithMessage(31, 'GPv2: malformed transfer result')
}
}
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity 0.8.10;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, 'SafeCast: value must be positive');
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(
value >= type(int128).min && value <= type(int128).max,
"SafeCast: value doesn't fit in 128 bits"
);
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(
value >= type(int64).min && value <= type(int64).max,
"SafeCast: value doesn't fit in 64 bits"
);
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(
value >= type(int32).min && value <= type(int32).max,
"SafeCast: value doesn't fit in 32 bits"
);
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(
value >= type(int16).min && value <= type(int16).max,
"SafeCast: value doesn't fit in 16 bits"
);
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(
value >= type(int8).min && value <= type(int8).max,
"SafeCast: value doesn't fit in 8 bits"
);
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
* @title IAaveIncentivesController
* @author Aave
* @notice Defines the basic interface for an Aave Incentives Controller.
* @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
*/
interface IAaveIncentivesController {
/**
* @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
* @dev The units of `totalSupply` and `userBalance` should be the same.
* @param user The address of the user whose asset balance has changed
* @param totalSupply The total supply of the asset prior to user balance change
* @param userBalance The previous user balance prior to balance change
*/
function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
/**
* @title IAToken
* @author Aave
* @notice Defines the basic interface for an AToken.
*/
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
/**
* @dev Emitted during the transfer action
* @param from The user whose tokens are being transferred
* @param to The recipient
* @param value The scaled amount being transferred
* @param index The next liquidity index of the reserve
*/
event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
/**
* @notice Mints `amount` aTokens to `user`
* @param caller The address performing the mint
* @param onBehalfOf The address of the user that will receive the minted aTokens
* @param amount The amount of tokens getting minted
* @param index The next liquidity index of the reserve
* @return `true` if the the previous balance of the user was 0
*/
function mint(
address caller,
address onBehalfOf,
uint256 amount,
uint256 index
) external returns (bool);
/**
* @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
* @dev In some instances, the mint event could be emitted from a burn transaction
* if the amount to burn is less than the interest that the user accrued
* @param from The address from which the aTokens will be burned
* @param receiverOfUnderlying The address that will receive the underlying
* @param amount The amount being burned
* @param index The next liquidity index of the reserve
*/
function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;
/**
* @notice Mints aTokens to the reserve treasury
* @param amount The amount of tokens getting minted
* @param index The next liquidity index of the reserve
*/
function mintToTreasury(uint256 amount, uint256 index) external;
/**
* @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
* @param from The address getting liquidated, current owner of the aTokens
* @param to The recipient
* @param value The amount of tokens getting transferred
*/
function transferOnLiquidation(address from, address to, uint256 value) external;
/**
* @notice Transfers the underlying asset to `target`.
* @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
* @param target The recipient of the underlying
* @param amount The amount getting transferred
*/
function transferUnderlyingTo(address target, uint256 amount) external;
/**
* @notice Handles the underlying received by the aToken after the transfer has been completed.
* @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
* transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
* to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
* @param user The user executing the repayment
* @param onBehalfOf The address of the user who will get his debt reduced/removed
* @param amount The amount getting repaid
*/
function handleRepayment(address user, address onBehalfOf, uint256 amount) external;
/**
* @notice Allow passing a signed message to approve spending
* @dev implements the permit function as for
* https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
* @param owner The owner of the funds
* @param spender The spender
* @param value The amount
* @param deadline The deadline timestamp, type(uint256).max for max deadline
* @param v Signature param
* @param s Signature param
* @param r Signature param
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @return The address of the underlying asset
*/
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
/**
* @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
* @return Address of the Aave treasury
*/
function RESERVE_TREASURY_ADDRESS() external view returns (address);
/**
* @notice Get the domain separator for the token
* @dev Return cached value if chainId matches cache, otherwise recomputes separator
* @return The domain separator of the token at current chain
*/
function DOMAIN_SEPARATOR() external view returns (bytes32);
/**
* @notice Returns the nonce for owner.
* @param owner The address of the owner
* @return The nonce of the owner
*/
function nonces(address owner) external view returns (uint256);
/**
* @notice Rescue and transfer tokens locked in this contract
* @param token The address of the token
* @param to The address of the recipient
* @param amount The amount of token to transfer
*/
function rescueTokens(address token, address to, uint256 amount) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
* @title IInitializableAToken
* @author Aave
* @notice Interface for the initialize function on AToken
*/
interface IInitializableAToken {
/**
* @dev Emitted when an aToken is initialized
* @param underlyingAsset The address of the underlying asset
* @param pool The address of the associated pool
* @param treasury The address of the treasury
* @param incentivesController The address of the incentives controller for this aToken
* @param aTokenDecimals The decimals of the underlying
* @param aTokenName The name of the aToken
* @param aTokenSymbol The symbol of the aToken
* @param params A set of encoded parameters for additional initialization
*/
event Initialized(
address indexed underlyingAsset,
address indexed pool,
address treasury,
address incentivesController,
uint8 aTokenDecimals,
string aTokenName,
string aTokenSymbol,
bytes params
);
/**
* @notice Initializes the aToken
* @param pool The pool contract that is initializing this contract
* @param treasury The address of the Aave treasury, receiving the fees on this aToken
* @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @param incentivesController The smart contract managing potential incentives distribution
* @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
* @param aTokenName The name of the aToken
* @param aTokenSymbol The symbol of the aToken
* @param params A set of encoded parameters for additional initialization
*/
function initialize(
IPool pool,
address treasury,
address underlyingAsset,
IAaveIncentivesController incentivesController,
uint8 aTokenDecimals,
string calldata aTokenName,
string calldata aTokenSymbol,
bytes calldata params
) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';
/**
* @title IInitializableDebtToken
* @author Aave
* @notice Interface for the initialize function common between debt tokens
*/
interface IInitializableDebtToken {
/**
* @dev Emitted when a debt token is initialized
* @param underlyingAsset The address of the underlying asset
* @param pool The address of the associated pool
* @param incentivesController The address of the incentives controller for this aToken
* @param debtTokenDecimals The decimals of the debt token
* @param debtTokenName The name of the debt token
* @param debtTokenSymbol The symbol of the debt token
* @param params A set of encoded parameters for additional initialization
*/
event Initialized(
address indexed underlyingAsset,
address indexed pool,
address incentivesController,
uint8 debtTokenDecimals,
string debtTokenName,
string debtTokenSymbol,
bytes params
);
/**
* @notice Initializes the debt token.
* @param pool The pool contract that is initializing this contract
* @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @param incentivesController The smart contract managing potential incentives distribution
* @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
* @param debtTokenName The name of the token
* @param debtTokenSymbol The symbol of the token
* @param params A set of encoded parameters for additional initialization
*/
function initialize(
IPool pool,
address underlyingAsset,
IAaveIncentivesController incentivesController,
uint8 debtTokenDecimals,
string memory debtTokenName,
string memory debtTokenSymbol,
bytes calldata params
) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
* @title IPool
* @author Aave
* @notice Defines the basic interface for an Aave Pool.
*/
interface IPool {
/**
* @dev Emitted on mintUnbacked()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the supply
* @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
* @param amount The amount of supplied assets
* @param referralCode The referral code used
*/
event MintUnbacked(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referralCode
);
/**
* @dev Emitted on backUnbacked()
* @param reserve The address of the underlying asset of the reserve
* @param backer The address paying for the backing
* @param amount The amount added as backing
* @param fee The amount paid in fees
*/
event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);
/**
* @dev Emitted on supply()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the supply
* @param onBehalfOf The beneficiary of the supply, receiving the aTokens
* @param amount The amount supplied
* @param referralCode The referral code used
*/
event Supply(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referralCode
);
/**
* @dev Emitted on withdraw()
* @param reserve The address of the underlying asset being withdrawn
* @param user The address initiating the withdrawal, owner of aTokens
* @param to The address that will receive the underlying
* @param amount The amount to be withdrawn
*/
event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
/**
* @dev Emitted on borrow() and flashLoan() when debt needs to be opened
* @param reserve The address of the underlying asset being borrowed
* @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
* initiator of the transaction on flashLoan()
* @param onBehalfOf The address that will be getting the debt
* @param amount The amount borrowed out
* @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
* @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
* @param referralCode The referral code used
*/
event Borrow(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
DataTypes.InterestRateMode interestRateMode,
uint256 borrowRate,
uint16 indexed referralCode
);
/**
* @dev Emitted on repay()
* @param reserve The address of the underlying asset of the reserve
* @param user The beneficiary of the repayment, getting his debt reduced
* @param repayer The address of the user initiating the repay(), providing the funds
* @param amount The amount repaid
* @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
*/
event Repay(
address indexed reserve,
address indexed user,
address indexed repayer,
uint256 amount,
bool useATokens
);
/**
* @dev Emitted on swapBorrowRateMode()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user swapping his rate mode
* @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
*/
event SwapBorrowRateMode(
address indexed reserve,
address indexed user,
DataTypes.InterestRateMode interestRateMode
);
/**
* @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
* @param asset The address of the underlying asset of the reserve
* @param totalDebt The total isolation mode debt for the reserve
*/
event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);
/**
* @dev Emitted when the user selects a certain asset category for eMode
* @param user The address of the user
* @param categoryId The category id
*/
event UserEModeSet(address indexed user, uint8 categoryId);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
*/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
*/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on rebalanceStableBorrowRate()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user for which the rebalance has been executed
*/
event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
/**
* @dev Emitted on flashLoan()
* @param target The address of the flash loan receiver contract
* @param initiator The address initiating the flash loan
* @param asset The address of the asset being flash borrowed
* @param amount The amount flash borrowed
* @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
* @param premium The fee flash borrowed
* @param referralCode The referral code used
*/
event FlashLoan(
address indexed target,
address initiator,
address indexed asset,
uint256 amount,
DataTypes.InterestRateMode interestRateMode,
uint256 premium,
uint16 indexed referralCode
);
/**
* @dev Emitted when a borrower is liquidated.
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param liquidatedCollateralAmount The amount of collateral received by the liquidator
* @param liquidator The address of the liquidator
* @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
*/
event LiquidationCall(
address indexed collateralAsset,
address indexed debtAsset,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when the state of a reserve is updated.
* @param reserve The address of the underlying asset of the reserve
* @param liquidityRate The next liquidity rate
* @param stableBorrowRate The next stable borrow rate
* @param variableBorrowRate The next variable borrow rate
* @param liquidityIndex The next liquidity index
* @param variableBorrowIndex The next variable borrow index
*/
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
* @param reserve The address of the reserve
* @param amountMinted The amount minted to the treasury
*/
event MintedToTreasury(address indexed reserve, uint256 amountMinted);
/**
* @notice Mints an `amount` of aTokens to the `onBehalfOf`
* @param asset The address of the underlying asset to mint
* @param amount The amount to mint
* @param onBehalfOf The address that will receive the aTokens
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function mintUnbacked(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
/**
* @notice Back the current unbacked underlying with `amount` and pay `fee`.
* @param asset The address of the underlying asset to back
* @param amount The amount to back
* @param fee The amount paid in fees
* @return The backed amount
*/
function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);
/**
* @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User supplies 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
/**
* @notice Supply with transfer approval of asset to be supplied done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param deadline The deadline timestamp that the permit is valid
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
*/
function supplyWithPermit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external;
/**
* @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to The address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
* @return The final amount withdrawn
*/
function withdraw(address asset, uint256 amount, address to) external returns (uint256);
/**
* @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already supplied enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
*/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @return The final amount repaid
*/
function repay(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf
) external returns (uint256);
/**
* @notice Repay with transfer approval of asset to be repaid done via permit function
* see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @param deadline The deadline timestamp that the permit is valid
* @param permitV The V parameter of ERC712 permit sig
* @param permitR The R parameter of ERC712 permit sig
* @param permitS The S parameter of ERC712 permit sig
* @return The final amount repaid
*/
function repayWithPermit(
address asset,
uint256 amount,
uint256 interestRateMode,
address onBehalfOf,
uint256 deadline,
uint8 permitV,
bytes32 permitR,
bytes32 permitS
) external returns (uint256);
/**
* @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
* equivalent debt tokens
* - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
* @dev Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
* balance is not enough to cover the whole debt
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @return The final amount repaid
*/
function repayWithATokens(
address asset,
uint256 amount,
uint256 interestRateMode
) external returns (uint256);
/**
* @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
* @param asset The address of the underlying asset borrowed
* @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
*/
function swapBorrowRateMode(address asset, uint256 interestRateMode) external;
/**
* @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
* much has been borrowed at a stable rate and suppliers are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
*/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @notice Allows suppliers to enable/disable a specific supplied asset as collateral
* @param asset The address of the underlying asset supplied
* @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
*/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
*/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
* into consideration. For further details please visit https://docs.aave.com/developers/
* @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
* @param assets The addresses of the assets being flash-borrowed
* @param amounts The amounts of the assets being flash-borrowed
* @param interestRateModes Types of the debt to open if the flash loan is not returned:
* 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
* 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function flashLoan(
address receiverAddress,
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata interestRateModes,
address onBehalfOf,
bytes calldata params,
uint16 referralCode
) external;
/**
* @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
* into consideration. For further details please visit https://docs.aave.com/developers/
* @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
* @param asset The address of the asset being flash-borrowed
* @param amount The amount of the asset being flash-borrowed
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode The code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function flashLoanSimple(
address receiverAddress,
address asset,
uint256 amount,
bytes calldata params,
uint16 referralCode
) external;
/**
* @notice Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
* @return totalDebtBase The total debt of the user in the base currency used by the price feed
* @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
* @return currentLiquidationThreshold The liquidation threshold of the user
* @return ltv The loan to value of The user
* @return healthFactor The current health factor of the user
*/
function getUserAccountData(
address user
)
external
view
returns (
uint256 totalCollateralBase,
uint256 totalDebtBase,
uint256 availableBorrowsBase,
uint256 currentLiquidationThreshold,
uint256 ltv,
uint256 healthFactor
);
/**
* @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
* interest rate strategy
* @dev Only callable by the PoolConfigurator contract
* @param asset The address of the underlying asset of the reserve
* @param aTokenAddress The address of the aToken that will be assigned to the reserve
* @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
* @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
* @param interestRateStrategyAddress The address of the interest rate strategy contract
*/
function initReserve(
address asset,
address aTokenAddress,
address stableDebtAddress,
address variableDebtAddress,
address interestRateStrategyAddress
) external;
/**
* @notice Drop a reserve
* @dev Only callable by the PoolConfigurator contract
* @param asset The address of the underlying asset of the reserve
*/
function dropReserve(address asset) external;
/**
* @notice Updates the address of the interest rate strategy contract
* @dev Only callable by the PoolConfigurator contract
* @param asset The address of the underlying asset of the reserve
* @param rateStrategyAddress The address of the interest rate strategy contract
*/
function setReserveInterestRateStrategyAddress(
address asset,
address rateStrategyAddress
) external;
/**
* @notice Sets the configuration bitmap of the reserve as a whole
* @dev Only callable by the PoolConfigurator contract
* @param asset The address of the underlying asset of the reserve
* @param configuration The new configuration bitmap
*/
function setConfiguration(
address asset,
DataTypes.ReserveConfigurationMap calldata configuration
) external;
/**
* @notice Returns the configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The configuration of the reserve
*/
function getConfiguration(
address asset
) external view returns (DataTypes.ReserveConfigurationMap memory);
/**
* @notice Returns the configuration of the user across all the reserves
* @param user The user address
* @return The configuration of the user
*/
function getUserConfiguration(
address user
) external view returns (DataTypes.UserConfigurationMap memory);
/**
* @notice Returns the normalized income of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The reserve's normalized income
*/
function getReserveNormalizedIncome(address asset) external view returns (uint256);
/**
* @notice Returns the normalized variable debt per unit of asset
* @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
* "dynamic" variable index based on time, current stored index and virtual rate at the current
* moment (approx. a borrower would get if opening a position). This means that is always used in
* combination with variable debt supply/balances.
* If using this function externally, consider that is possible to have an increasing normalized
* variable debt that is not equivalent to how the variable debt index would be updated in storage
* (e.g. only updates with non-zero variable debt supply)
* @param asset The address of the underlying asset of the reserve
* @return The reserve normalized variable debt
*/
function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
/**
* @notice Returns the state and configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The state and configuration data of the reserve
*/
function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
/**
* @notice Validates and finalizes an aToken transfer
* @dev Only callable by the overlying aToken of the `asset`
* @param asset The address of the underlying asset of the aToken
* @param from The user from which the aTokens are transferred
* @param to The user receiving the aTokens
* @param amount The amount being transferred/withdrawn
* @param balanceFromBefore The aToken balance of the `from` user before the transfer
* @param balanceToBefore The aToken balance of the `to` user before the transfer
*/
function finalizeTransfer(
address asset,
address from,
address to,
uint256 amount,
uint256 balanceFromBefore,
uint256 balanceToBefore
) external;
/**
* @notice Returns the list of the underlying assets of all the initialized reserves
* @dev It does not include dropped reserves
* @return The addresses of the underlying assets of the initialized reserves
*/
function getReservesList() external view returns (address[] memory);
/**
* @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
* @param id The id of the reserve as stored in the DataTypes.ReserveData struct
* @return The address of the reserve associated with id
*/
function getReserveAddressById(uint16 id) external view returns (address);
/**
* @notice Returns the PoolAddressesProvider connected to this contract
* @return The address of the PoolAddressesProvider
*/
function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);
/**
* @notice Updates the protocol fee on the bridging
* @param bridgeProtocolFee The part of the premium sent to the protocol treasury
*/
function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;
/**
* @notice Updates flash loan premiums. Flash loan premium consists of two parts:
* - A part is sent to aToken holders as extra, one time accumulated interest
* - A part is collected by the protocol treasury
* @dev The total premium is calculated on the total borrowed amount
* @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
* @dev Only callable by the PoolConfigurator contract
* @param flashLoanPremiumTotal The total premium, expressed in bps
* @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
*/
function updateFlashloanPremiums(
uint128 flashLoanPremiumTotal,
uint128 flashLoanPremiumToProtocol
) external;
/**
* @notice Configures a new category for the eMode.
* @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
* The category 0 is reserved as it's the default for volatile assets
* @param id The id of the category
* @param config The configuration of the category
*/
function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;
/**
* @notice Returns the data of an eMode category
* @param id The id of the category
* @return The configuration data of the category
*/
function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);
/**
* @notice Allows a user to use the protocol in eMode
* @param categoryId The id of the category
*/
function setUserEMode(uint8 categoryId) external;
/**
* @notice Returns the eMode the user is using
* @param user The address of the user
* @return The eMode id
*/
function getUserEMode(address user) external view returns (uint256);
/**
* @notice Resets the isolation mode total debt of the given asset to zero
* @dev It requires the given asset has zero debt ceiling
* @param asset The address of the underlying asset to reset the isolationModeTotalDebt
*/
function resetIsolationModeTotalDebt(address asset) external;
/**
* @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
* @return The percentage of available liquidity to borrow, expressed in bps
*/
function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);
/**
* @notice Returns the total fee on flash loans
* @return The total fee on flashloans
*/
function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);
/**
* @notice Returns the part of the bridge fees sent to protocol
* @return The bridge fee sent to the protocol treasury
*/
function BRIDGE_PROTOCOL_FEE() external view returns (uint256);
/**
* @notice Returns the part of the flashloan fees sent to protocol
* @return The flashloan fee sent to the protocol treasury
*/
function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);
/**
* @notice Returns the maximum number of reserves supported to be listed in this Pool
* @return The maximum number of reserves supported
*/
function MAX_NUMBER_RESERVES() external view returns (uint16);
/**
* @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
* @param assets The list of reserves for which the minting needs to be executed
*/
function mintToTreasury(address[] calldata assets) external;
/**
* @notice Rescue and transfer tokens locked in this contract
* @param token The address of the token
* @param to The address of the recipient
* @param amount The amount of token to transfer
*/
function rescueTokens(address token, address to, uint256 amount) external;
/**
* @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User supplies 100 USDC and gets in return 100 aUSDC
* @dev Deprecated: Use the `supply` function instead
* @param asset The address of the underlying asset to supply
* @param amount The amount to be supplied
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
*/
function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
* @title IPoolAddressesProvider
* @author Aave
* @notice Defines the basic interface for a Pool Addresses Provider.
*/
interface IPoolAddressesProvider {
/**
* @dev Emitted when the market identifier is updated.
* @param oldMarketId The old id of the market
* @param newMarketId The new id of the market
*/
event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);
/**
* @dev Emitted when the pool is updated.
* @param oldAddress The old address of the Pool
* @param newAddress The new address of the Pool
*/
event PoolUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the pool configurator is updated.
* @param oldAddress The old address of the PoolConfigurator
* @param newAddress The new address of the PoolConfigurator
*/
event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the price oracle is updated.
* @param oldAddress The old address of the PriceOracle
* @param newAddress The new address of the PriceOracle
*/
event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the ACL manager is updated.
* @param oldAddress The old address of the ACLManager
* @param newAddress The new address of the ACLManager
*/
event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the ACL admin is updated.
* @param oldAddress The old address of the ACLAdmin
* @param newAddress The new address of the ACLAdmin
*/
event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the price oracle sentinel is updated.
* @param oldAddress The old address of the PriceOracleSentinel
* @param newAddress The new address of the PriceOracleSentinel
*/
event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the pool data provider is updated.
* @param oldAddress The old address of the PoolDataProvider
* @param newAddress The new address of the PoolDataProvider
*/
event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when a new proxy is created.
* @param id The identifier of the proxy
* @param proxyAddress The address of the created proxy contract
* @param implementationAddress The address of the implementation contract
*/
event ProxyCreated(
bytes32 indexed id,
address indexed proxyAddress,
address indexed implementationAddress
);
/**
* @dev Emitted when a new non-proxied contract address is registered.
* @param id The identifier of the contract
* @param oldAddress The address of the old contract
* @param newAddress The address of the new contract
*/
event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);
/**
* @dev Emitted when the implementation of the proxy registered with id is updated
* @param id The identifier of the contract
* @param proxyAddress The address of the proxy contract
* @param oldImplementationAddress The address of the old implementation contract
* @param newImplementationAddress The address of the new implementation contract
*/
event AddressSetAsProxy(
bytes32 indexed id,
address indexed proxyAddress,
address oldImplementationAddress,
address indexed newImplementationAddress
);
/**
* @notice Returns the id of the Aave market to which this contract points to.
* @return The market id
*/
function getMarketId() external view returns (string memory);
/**
* @notice Associates an id with a specific PoolAddressesProvider.
* @dev This can be used to create an onchain registry of PoolAddressesProviders to
* identify and validate multiple Aave markets.
* @param newMarketId The market id
*/
function setMarketId(string calldata newMarketId) external;
/**
* @notice Returns an address by its identifier.
* @dev The returned address might be an EOA or a contract, potentially proxied
* @dev It returns ZERO if there is no registered address with the given id
* @param id The id
* @return The address of the registered for the specified id
*/
function getAddress(bytes32 id) external view returns (address);
/**
* @notice General function to update the implementation of a proxy registered with
* certain `id`. If there is no proxy registered, it will instantiate one and
* set as implementation the `newImplementationAddress`.
* @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
* setter function, in order to avoid unexpected consequences
* @param id The id
* @param newImplementationAddress The address of the new implementation
*/
function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;
/**
* @notice Sets an address for an id replacing the address saved in the addresses map.
* @dev IMPORTANT Use this function carefully, as it will do a hard replacement
* @param id The id
* @param newAddress The address to set
*/
function setAddress(bytes32 id, address newAddress) external;
/**
* @notice Returns the address of the Pool proxy.
* @return The Pool proxy address
*/
function getPool() external view returns (address);
/**
* @notice Updates the implementation of the Pool, or creates a proxy
* setting the new `pool` implementation when the function is called for the first time.
* @param newPoolImpl The new Pool implementation
*/
function setPoolImpl(address newPoolImpl) external;
/**
* @notice Returns the address of the PoolConfigurator proxy.
* @return The PoolConfigurator proxy address
*/
function getPoolConfigurator() external view returns (address);
/**
* @notice Updates the implementation of the PoolConfigurator, or creates a proxy
* setting the new `PoolConfigurator` implementation when the function is called for the first time.
* @param newPoolConfiguratorImpl The new PoolConfigurator implementation
*/
function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;
/**
* @notice Returns the address of the price oracle.
* @return The address of the PriceOracle
*/
function getPriceOracle() external view returns (address);
/**
* @notice Updates the address of the price oracle.
* @param newPriceOracle The address of the new PriceOracle
*/
function setPriceOracle(address newPriceOracle) external;
/**
* @notice Returns the address of the ACL manager.
* @return The address of the ACLManager
*/
function getACLManager() external view returns (address);
/**
* @notice Updates the address of the ACL manager.
* @param newAclManager The address of the new ACLManager
*/
function setACLManager(address newAclManager) external;
/**
* @notice Returns the address of the ACL admin.
* @return The address of the ACL admin
*/
function getACLAdmin() external view returns (address);
/**
* @notice Updates the address of the ACL admin.
* @param newAclAdmin The address of the new ACL admin
*/
function setACLAdmin(address newAclAdmin) external;
/**
* @notice Returns the address of the price oracle sentinel.
* @return The address of the PriceOracleSentinel
*/
function getPriceOracleSentinel() external view returns (address);
/**
* @notice Updates the address of the price oracle sentinel.
* @param newPriceOracleSentinel The address of the new PriceOracleSentinel
*/
function setPriceOracleSentinel(address newPriceOracleSentinel) external;
/**
* @notice Returns the address of the data provider.
* @return The address of the DataProvider
*/
function getPoolDataProvider() external view returns (address);
/**
* @notice Updates the address of the data provider.
* @param newDataProvider The address of the new DataProvider
*/
function setPoolDataProvider(address newDataProvider) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
/**
* @title IReserveInterestRateStrategy
* @author Aave
* @notice Interface for the calculation of the interest rates
*/
interface IReserveInterestRateStrategy {
/**
* @notice Calculates the interest rates depending on the reserve's state and configurations
* @param params The parameters needed to calculate interest rates
* @return liquidityRate The liquidity rate expressed in rays
* @return stableBorrowRate The stable borrow rate expressed in rays
* @return variableBorrowRate The variable borrow rate expressed in rays
*/
function calculateInterestRates(
DataTypes.CalculateInterestRatesParams memory params
) external view returns (uint256, uint256, uint256);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
/**
* @title IScaledBalanceToken
* @author Aave
* @notice Defines the basic interface for a scaled-balance token.
*/
interface IScaledBalanceToken {
/**
* @dev Emitted after the mint action
* @param caller The address performing the mint
* @param onBehalfOf The address of the user that will receive the minted tokens
* @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
* @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
* @param index The next liquidity index of the reserve
*/
event Mint(
address indexed caller,
address indexed onBehalfOf,
uint256 value,
uint256 balanceIncrease,
uint256 index
);
/**
* @dev Emitted after the burn action
* @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
* @param from The address from which the tokens will be burned
* @param target The address that will receive the underlying, if any
* @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
* @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
* @param index The next liquidity index of the reserve
*/
event Burn(
address indexed from,
address indexed target,
uint256 value,
uint256 balanceIncrease,
uint256 index
);
/**
* @notice Returns the scaled balance of the user.
* @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
* at the moment of the update
* @param user The user whose balance is calculated
* @return The scaled balance of the user
*/
function scaledBalanceOf(address user) external view returns (uint256);
/**
* @notice Returns the scaled balance of the user and the scaled total supply.
* @param user The address of the user
* @return The scaled balance of the user
* @return The scaled total supply
*/
function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
/**
* @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
* @return The scaled total supply
*/
function scaledTotalSupply() external view returns (uint256);
/**
* @notice Returns last index interest was accrued to the user's balance
* @param user The address of the user
* @return The last index interest was accrued to the user's balance, expressed in ray
*/
function getPreviousIndex(address user) external view returns (uint256);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
/**
* @title IStableDebtToken
* @author Aave
* @notice Defines the interface for the stable debt token
* @dev It does not inherit from IERC20 to save in code size
*/
interface IStableDebtToken is IInitializableDebtToken {
/**
* @dev Emitted when new stable debt is minted
* @param user The address of the user who triggered the minting
* @param onBehalfOf The recipient of stable debt tokens
* @param amount The amount minted (user entered amount + balance increase from interest)
* @param currentBalance The balance of the user based on the previous balance and balance increase from interest
* @param balanceIncrease The increase in balance since the last action of the user 'onBehalfOf'
* @param newRate The rate of the debt after the minting
* @param avgStableRate The next average stable rate after the minting
* @param newTotalSupply The next total supply of the stable debt token after the action
*/
event Mint(
address indexed user,
address indexed onBehalfOf,
uint256 amount,
uint256 currentBalance,
uint256 balanceIncrease,
uint256 newRate,
uint256 avgStableRate,
uint256 newTotalSupply
);
/**
* @dev Emitted when new stable debt is burned
* @param from The address from which the debt will be burned
* @param amount The amount being burned (user entered amount - balance increase from interest)
* @param currentBalance The balance of the user based on the previous balance and balance increase from interest
* @param balanceIncrease The increase in balance since the last action of 'from'
* @param avgStableRate The next average stable rate after the burning
* @param newTotalSupply The next total supply of the stable debt token after the action
*/
event Burn(
address indexed from,
uint256 amount,
uint256 currentBalance,
uint256 balanceIncrease,
uint256 avgStableRate,
uint256 newTotalSupply
);
/**
* @notice Mints debt token to the `onBehalfOf` address.
* @dev The resulting rate is the weighted average between the rate of the new debt
* and the rate of the previous debt
* @param user The address receiving the borrowed underlying, being the delegatee in case
* of credit delegate, or same as `onBehalfOf` otherwise
* @param onBehalfOf The address receiving the debt tokens
* @param amount The amount of debt tokens to mint
* @param rate The rate of the debt being minted
* @return True if it is the first borrow, false otherwise
* @return The total stable debt
* @return The average stable borrow rate
*/
function mint(
address user,
address onBehalfOf,
uint256 amount,
uint256 rate
) external returns (bool, uint256, uint256);
/**
* @notice Burns debt of `user`
* @dev The resulting rate is the weighted average between the rate of the new debt
* and the rate of the previous debt
* @dev In some instances, a burn transaction will emit a mint event
* if the amount to burn is less than the interest the user earned
* @param from The address from which the debt will be burned
* @param amount The amount of debt tokens getting burned
* @return The total stable debt
* @return The average stable borrow rate
*/
function burn(address from, uint256 amount) external returns (uint256, uint256);
/**
* @notice Returns the average rate of all the stable rate loans.
* @return The average stable rate
*/
function getAverageStableRate() external view returns (uint256);
/**
* @notice Returns the stable rate of the user debt
* @param user The address of the user
* @return The stable rate of the user
*/
function getUserStableRate(address user) external view returns (uint256);
/**
* @notice Returns the timestamp of the last update of the user
* @param user The address of the user
* @return The timestamp
*/
function getUserLastUpdated(address user) external view returns (uint40);
/**
* @notice Returns the principal, the total supply, the average stable rate and the timestamp for the last update
* @return The principal
* @return The total supply
* @return The average stable rate
* @return The timestamp of the last update
*/
function getSupplyData() external view returns (uint256, uint256, uint256, uint40);
/**
* @notice Returns the timestamp of the last update of the total supply
* @return The timestamp
*/
function getTotalSupplyLastUpdated() external view returns (uint40);
/**
* @notice Returns the total supply and the average stable rate
* @return The total supply
* @return The average rate
*/
function getTotalSupplyAndAvgRate() external view returns (uint256, uint256);
/**
* @notice Returns the principal debt balance of the user
* @return The debt balance of the user since the last burn/mint action
*/
function principalBalanceOf(address user) external view returns (uint256);
/**
* @notice Returns the address of the underlying asset of this stableDebtToken (E.g. WETH for stableDebtWETH)
* @return The address of the underlying asset
*/
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
/**
* @title IVariableDebtToken
* @author Aave
* @notice Defines the basic interface for a variable debt token.
*/
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
/**
* @notice Mints debt token to the `onBehalfOf` address
* @param user The address receiving the borrowed underlying, being the delegatee in case
* of credit delegate, or same as `onBehalfOf` otherwise
* @param onBehalfOf The address receiving the debt tokens
* @param amount The amount of debt being minted
* @param index The variable debt index of the reserve
* @return True if the previous balance of the user is 0, false otherwise
* @return The scaled total debt of the reserve
*/
function mint(
address user,
address onBehalfOf,
uint256 amount,
uint256 index
) external returns (bool, uint256);
/**
* @notice Burns user variable debt
* @dev In some instances, a burn transaction will emit a mint event
* if the amount to burn is less than the interest that the user accrued
* @param from The address from which the debt will be burned
* @param amount The amount getting burned
* @param index The variable debt index of the reserve
* @return The scaled total debt of the reserve
*/
function burn(address from, uint256 amount, uint256 index) external returns (uint256);
/**
* @notice Returns the address of the underlying asset of this debtToken (E.g. WETH for variableDebtWETH)
* @return The address of the underlying asset
*/
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title ReserveConfiguration library
* @author Aave
* @notice Implements the bitmap logic to handle the reserve configuration
*/
library ReserveConfiguration {
uint256 internal constant LTV_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
uint256 internal constant LIQUIDATION_THRESHOLD_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
uint256 internal constant LIQUIDATION_BONUS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
uint256 internal constant DECIMALS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
uint256 internal constant ACTIVE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant FROZEN_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant STABLE_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant PAUSED_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant BORROWABLE_IN_ISOLATION_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant SILOED_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant FLASHLOAN_ENABLED_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant RESERVE_FACTOR_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant BORROW_CAP_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant SUPPLY_CAP_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant EMODE_CATEGORY_MASK = 0xFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant UNBACKED_MINT_CAP_MASK = 0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
uint256 internal constant DEBT_CEILING_MASK = 0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
/// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
uint256 internal constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59;
uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
uint256 internal constant EMODE_CATEGORY_START_BIT_POSITION = 168;
uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
uint256 internal constant MAX_VALID_LTV = 65535;
uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
uint256 internal constant MAX_VALID_DECIMALS = 255;
uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
uint256 internal constant MAX_VALID_EMODE_CATEGORY = 255;
uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;
uint256 public constant DEBT_CEILING_DECIMALS = 2;
uint16 public constant MAX_RESERVES_COUNT = 128;
/**
* @notice Sets the Loan to Value of the reserve
* @param self The reserve configuration
* @param ltv The new ltv
*/
function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);
self.data = (self.data & LTV_MASK) | ltv;
}
/**
* @notice Gets the Loan to Value of the reserve
* @param self The reserve configuration
* @return The loan to value
*/
function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
return self.data & ~LTV_MASK;
}
/**
* @notice Sets the liquidation threshold of the reserve
* @param self The reserve configuration
* @param threshold The new liquidation threshold
*/
function setLiquidationThreshold(
DataTypes.ReserveConfigurationMap memory self,
uint256 threshold
) internal pure {
require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);
self.data =
(self.data & LIQUIDATION_THRESHOLD_MASK) |
(threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
}
/**
* @notice Gets the liquidation threshold of the reserve
* @param self The reserve configuration
* @return The liquidation threshold
*/
function getLiquidationThreshold(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
}
/**
* @notice Sets the liquidation bonus of the reserve
* @param self The reserve configuration
* @param bonus The new liquidation bonus
*/
function setLiquidationBonus(
DataTypes.ReserveConfigurationMap memory self,
uint256 bonus
) internal pure {
require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);
self.data =
(self.data & LIQUIDATION_BONUS_MASK) |
(bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
}
/**
* @notice Gets the liquidation bonus of the reserve
* @param self The reserve configuration
* @return The liquidation bonus
*/
function getLiquidationBonus(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
}
/**
* @notice Sets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @param decimals The decimals
*/
function setDecimals(
DataTypes.ReserveConfigurationMap memory self,
uint256 decimals
) internal pure {
require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);
self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
}
/**
* @notice Gets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @return The decimals of the asset
*/
function getDecimals(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
}
/**
* @notice Sets the active state of the reserve
* @param self The reserve configuration
* @param active The active state
*/
function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
self.data =
(self.data & ACTIVE_MASK) |
(uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
}
/**
* @notice Gets the active state of the reserve
* @param self The reserve configuration
* @return The active state
*/
function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
return (self.data & ~ACTIVE_MASK) != 0;
}
/**
* @notice Sets the frozen state of the reserve
* @param self The reserve configuration
* @param frozen The frozen state
*/
function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
self.data =
(self.data & FROZEN_MASK) |
(uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
}
/**
* @notice Gets the frozen state of the reserve
* @param self The reserve configuration
* @return The frozen state
*/
function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
return (self.data & ~FROZEN_MASK) != 0;
}
/**
* @notice Sets the paused state of the reserve
* @param self The reserve configuration
* @param paused The paused state
*/
function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
self.data =
(self.data & PAUSED_MASK) |
(uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
}
/**
* @notice Gets the paused state of the reserve
* @param self The reserve configuration
* @return The paused state
*/
function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
return (self.data & ~PAUSED_MASK) != 0;
}
/**
* @notice Sets the borrowable in isolation flag for the reserve.
* @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
* amount will be accumulated in the isolated collateral's total debt exposure.
* @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
* consistency in the debt ceiling calculations.
* @param self The reserve configuration
* @param borrowable True if the asset is borrowable
*/
function setBorrowableInIsolation(
DataTypes.ReserveConfigurationMap memory self,
bool borrowable
) internal pure {
self.data =
(self.data & BORROWABLE_IN_ISOLATION_MASK) |
(uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
}
/**
* @notice Gets the borrowable in isolation flag for the reserve.
* @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
* isolated collateral is accounted for in the isolated collateral's total debt exposure.
* @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
* consistency in the debt ceiling calculations.
* @param self The reserve configuration
* @return The borrowable in isolation flag
*/
function getBorrowableInIsolation(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool) {
return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
}
/**
* @notice Sets the siloed borrowing flag for the reserve.
* @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
* @param self The reserve configuration
* @param siloed True if the asset is siloed
*/
function setSiloedBorrowing(
DataTypes.ReserveConfigurationMap memory self,
bool siloed
) internal pure {
self.data =
(self.data & SILOED_BORROWING_MASK) |
(uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
}
/**
* @notice Gets the siloed borrowing flag for the reserve.
* @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
* @param self The reserve configuration
* @return The siloed borrowing flag
*/
function getSiloedBorrowing(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool) {
return (self.data & ~SILOED_BORROWING_MASK) != 0;
}
/**
* @notice Enables or disables borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the borrowing needs to be enabled, false otherwise
*/
function setBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self,
bool enabled
) internal pure {
self.data =
(self.data & BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @notice Gets the borrowing state of the reserve
* @param self The reserve configuration
* @return The borrowing state
*/
function getBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool) {
return (self.data & ~BORROWING_MASK) != 0;
}
/**
* @notice Enables or disables stable rate borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the stable rate borrowing needs to be enabled, false otherwise
*/
function setStableRateBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self,
bool enabled
) internal pure {
self.data =
(self.data & STABLE_BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @notice Gets the stable rate borrowing state of the reserve
* @param self The reserve configuration
* @return The stable rate borrowing state
*/
function getStableRateBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool) {
return (self.data & ~STABLE_BORROWING_MASK) != 0;
}
/**
* @notice Sets the reserve factor of the reserve
* @param self The reserve configuration
* @param reserveFactor The reserve factor
*/
function setReserveFactor(
DataTypes.ReserveConfigurationMap memory self,
uint256 reserveFactor
) internal pure {
require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);
self.data =
(self.data & RESERVE_FACTOR_MASK) |
(reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
}
/**
* @notice Gets the reserve factor of the reserve
* @param self The reserve configuration
* @return The reserve factor
*/
function getReserveFactor(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
}
/**
* @notice Sets the borrow cap of the reserve
* @param self The reserve configuration
* @param borrowCap The borrow cap
*/
function setBorrowCap(
DataTypes.ReserveConfigurationMap memory self,
uint256 borrowCap
) internal pure {
require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);
self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
}
/**
* @notice Gets the borrow cap of the reserve
* @param self The reserve configuration
* @return The borrow cap
*/
function getBorrowCap(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
}
/**
* @notice Sets the supply cap of the reserve
* @param self The reserve configuration
* @param supplyCap The supply cap
*/
function setSupplyCap(
DataTypes.ReserveConfigurationMap memory self,
uint256 supplyCap
) internal pure {
require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);
self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
}
/**
* @notice Gets the supply cap of the reserve
* @param self The reserve configuration
* @return The supply cap
*/
function getSupplyCap(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
}
/**
* @notice Sets the debt ceiling in isolation mode for the asset
* @param self The reserve configuration
* @param ceiling The maximum debt ceiling for the asset
*/
function setDebtCeiling(
DataTypes.ReserveConfigurationMap memory self,
uint256 ceiling
) internal pure {
require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);
self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
}
/**
* @notice Gets the debt ceiling for the asset if the asset is in isolation mode
* @param self The reserve configuration
* @return The debt ceiling (0 = isolation mode disabled)
*/
function getDebtCeiling(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
}
/**
* @notice Sets the liquidation protocol fee of the reserve
* @param self The reserve configuration
* @param liquidationProtocolFee The liquidation protocol fee
*/
function setLiquidationProtocolFee(
DataTypes.ReserveConfigurationMap memory self,
uint256 liquidationProtocolFee
) internal pure {
require(
liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
);
self.data =
(self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
(liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
}
/**
* @dev Gets the liquidation protocol fee
* @param self The reserve configuration
* @return The liquidation protocol fee
*/
function getLiquidationProtocolFee(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return
(self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
}
/**
* @notice Sets the unbacked mint cap of the reserve
* @param self The reserve configuration
* @param unbackedMintCap The unbacked mint cap
*/
function setUnbackedMintCap(
DataTypes.ReserveConfigurationMap memory self,
uint256 unbackedMintCap
) internal pure {
require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);
self.data =
(self.data & UNBACKED_MINT_CAP_MASK) |
(unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
}
/**
* @dev Gets the unbacked mint cap of the reserve
* @param self The reserve configuration
* @return The unbacked mint cap
*/
function getUnbackedMintCap(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
}
/**
* @notice Sets the eMode asset category
* @param self The reserve configuration
* @param category The asset category when the user selects the eMode
*/
function setEModeCategory(
DataTypes.ReserveConfigurationMap memory self,
uint256 category
) internal pure {
require(category <= MAX_VALID_EMODE_CATEGORY, Errors.INVALID_EMODE_CATEGORY);
self.data = (self.data & EMODE_CATEGORY_MASK) | (category << EMODE_CATEGORY_START_BIT_POSITION);
}
/**
* @dev Gets the eMode asset category
* @param self The reserve configuration
* @return The eMode category for the asset
*/
function getEModeCategory(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256) {
return (self.data & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION;
}
/**
* @notice Sets the flashloanable flag for the reserve
* @param self The reserve configuration
* @param flashLoanEnabled True if the asset is flashloanable, false otherwise
*/
function setFlashLoanEnabled(
DataTypes.ReserveConfigurationMap memory self,
bool flashLoanEnabled
) internal pure {
self.data =
(self.data & FLASHLOAN_ENABLED_MASK) |
(uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
}
/**
* @notice Gets the flashloanable flag for the reserve
* @param self The reserve configuration
* @return The flashloanable flag
*/
function getFlashLoanEnabled(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool) {
return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
}
/**
* @notice Gets the configuration flags of the reserve
* @param self The reserve configuration
* @return The state flag representing active
* @return The state flag representing frozen
* @return The state flag representing borrowing enabled
* @return The state flag representing stableRateBorrowing enabled
* @return The state flag representing paused
*/
function getFlags(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (bool, bool, bool, bool, bool) {
uint256 dataLocal = self.data;
return (
(dataLocal & ~ACTIVE_MASK) != 0,
(dataLocal & ~FROZEN_MASK) != 0,
(dataLocal & ~BORROWING_MASK) != 0,
(dataLocal & ~STABLE_BORROWING_MASK) != 0,
(dataLocal & ~PAUSED_MASK) != 0
);
}
/**
* @notice Gets the configuration parameters of the reserve from storage
* @param self The reserve configuration
* @return The state param representing ltv
* @return The state param representing liquidation threshold
* @return The state param representing liquidation bonus
* @return The state param representing reserve decimals
* @return The state param representing reserve factor
* @return The state param representing eMode category
*/
function getParams(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256, uint256, uint256, uint256, uint256, uint256) {
uint256 dataLocal = self.data;
return (
dataLocal & ~LTV_MASK,
(dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
(dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
(dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
(dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION,
(dataLocal & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION
);
}
/**
* @notice Gets the caps parameters of the reserve from storage
* @param self The reserve configuration
* @return The state param representing borrow cap
* @return The state param representing supply cap.
*/
function getCaps(
DataTypes.ReserveConfigurationMap memory self
) internal pure returns (uint256, uint256) {
uint256 dataLocal = self.data;
return (
(dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
(dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
* @title Errors library
* @author Aave
* @notice Defines the error messages emitted by the different contracts of the Aave protocol
*/
library Errors {
string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled'
string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode'
string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve'
string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero'
string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio'
string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled'
string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.10;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../../../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IStableDebtToken} from '../../../interfaces/IStableDebtToken.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {MathUtils} from '../math/MathUtils.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {SafeCast} from '../../../dependencies/openzeppelin/contracts/SafeCast.sol';
/**
* @title ReserveLogic library
* @author Aave
* @notice Implements the logic to update the reserves state
*/
library ReserveLogic {
using WadRayMath for uint256;
using PercentageMath for uint256;
using SafeCast for uint256;
using GPv2SafeERC20 for IERC20;
using ReserveLogic for DataTypes.ReserveData;
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
// See `IPool` for descriptions
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @notice Returns the ongoing normalized income for the reserve.
* @dev A value of 1e27 means there is no income. As time passes, the income is accrued
* @dev A value of 2*1e27 means for each unit of asset one unit of income has been accrued
* @param reserve The reserve object
* @return The normalized income, expressed in ray
*/
function getNormalizedIncome(
DataTypes.ReserveData storage reserve
) internal view returns (uint256) {
uint40 timestamp = reserve.lastUpdateTimestamp;
//solium-disable-next-line
if (timestamp == block.timestamp) {
//if the index was updated in the same block, no need to perform any calculation
return reserve.liquidityIndex;
} else {
return
MathUtils.calculateLinearInterest(reserve.currentLiquidityRate, timestamp).rayMul(
reserve.liquidityIndex
);
}
}
/**
* @notice Returns the ongoing normalized variable debt for the reserve.
* @dev A value of 1e27 means there is no debt. As time passes, the debt is accrued
* @dev A value of 2*1e27 means that for each unit of debt, one unit worth of interest has been accumulated
* @param reserve The reserve object
* @return The normalized variable debt, expressed in ray
*/
function getNormalizedDebt(
DataTypes.ReserveData storage reserve
) internal view returns (uint256) {
uint40 timestamp = reserve.lastUpdateTimestamp;
//solium-disable-next-line
if (timestamp == block.timestamp) {
//if the index was updated in the same block, no need to perform any calculation
return reserve.variableBorrowIndex;
} else {
return
MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp).rayMul(
reserve.variableBorrowIndex
);
}
}
/**
* @notice Updates the liquidity cumulative index and the variable borrow index.
* @param reserve The reserve object
* @param reserveCache The caching layer for the reserve data
*/
function updateState(
DataTypes.ReserveData storage reserve,
DataTypes.ReserveCache memory reserveCache
) internal {
// If time didn't pass since last stored timestamp, skip state update
//solium-disable-next-line
if (reserve.lastUpdateTimestamp == uint40(block.timestamp)) {
return;
}
_updateIndexes(reserve, reserveCache);
_accrueToTreasury(reserve, reserveCache);
//solium-disable-next-line
reserve.lastUpdateTimestamp = uint40(block.timestamp);
}
/**
* @notice Accumulates a predefined amount of asset to the reserve as a fixed, instantaneous income. Used for example
* to accumulate the flashloan fee to the reserve, and spread it between all the suppliers.
* @param reserve The reserve object
* @param totalLiquidity The total liquidity available in the reserve
* @param amount The amount to accumulate
* @return The next liquidity index of the reserve
*/
function cumulateToLiquidityIndex(
DataTypes.ReserveData storage reserve,
uint256 totalLiquidity,
uint256 amount
) internal returns (uint256) {
//next liquidity index is calculated this way: `((amount / totalLiquidity) + 1) * liquidityIndex`
//division `amount / totalLiquidity` done in ray for precision
uint256 result = (amount.wadToRay().rayDiv(totalLiquidity.wadToRay()) + WadRayMath.RAY).rayMul(
reserve.liquidityIndex
);
reserve.liquidityIndex = result.toUint128();
return result;
}
/**
* @notice Initializes a reserve.
* @param reserve The reserve object
* @param aTokenAddress The address of the overlying atoken contract
* @param stableDebtTokenAddress The address of the overlying stable debt token contract
* @param variableDebtTokenAddress The address of the overlying variable debt token contract
* @param interestRateStrategyAddress The address of the interest rate strategy contract
*/
function init(
DataTypes.ReserveData storage reserve,
address aTokenAddress,
address stableDebtTokenAddress,
address variableDebtTokenAddress,
address interestRateStrategyAddress
) internal {
require(reserve.aTokenAddress == address(0), Errors.RESERVE_ALREADY_INITIALIZED);
reserve.liquidityIndex = uint128(WadRayMath.RAY);
reserve.variableBorrowIndex = uint128(WadRayMath.RAY);
reserve.aTokenAddress = aTokenAddress;
reserve.stableDebtTokenAddress = stableDebtTokenAddress;
reserve.variableDebtTokenAddress = variableDebtTokenAddress;
reserve.interestRateStrategyAddress = interestRateStrategyAddress;
}
struct UpdateInterestRatesLocalVars {
uint256 nextLiquidityRate;
uint256 nextStableRate;
uint256 nextVariableRate;
uint256 totalVariableDebt;
}
/**
* @notice Updates the reserve current stable borrow rate, the current variable borrow rate and the current liquidity rate.
* @param reserve The reserve reserve to be updated
* @param reserveCache The caching layer for the reserve data
* @param reserveAddress The address of the reserve to be updated
* @param liquidityAdded The amount of liquidity added to the protocol (supply or repay) in the previous action
* @param liquidityTaken The amount of liquidity taken from the protocol (redeem or borrow)
*/
function updateInterestRates(
DataTypes.ReserveData storage reserve,
DataTypes.ReserveCache memory reserveCache,
address reserveAddress,
uint256 liquidityAdded,
uint256 liquidityTaken
) internal {
UpdateInterestRatesLocalVars memory vars;
vars.totalVariableDebt = reserveCache.nextScaledVariableDebt.rayMul(
reserveCache.nextVariableBorrowIndex
);
(
vars.nextLiquidityRate,
vars.nextStableRate,
vars.nextVariableRate
) = IReserveInterestRateStrategy(reserve.interestRateStrategyAddress).calculateInterestRates(
DataTypes.CalculateInterestRatesParams({
unbacked: reserve.unbacked,
liquidityAdded: liquidityAdded,
liquidityTaken: liquidityTaken,
totalStableDebt: reserveCache.nextTotalStableDebt,
totalVariableDebt: vars.totalVariableDebt,
averageStableBorrowRate: reserveCache.nextAvgStableBorrowRate,
reserveFactor: reserveCache.reserveFactor,
reserve: reserveAddress,
aToken: reserveCache.aTokenAddress
})
);
reserve.currentLiquidityRate = vars.nextLiquidityRate.toUint128();
reserve.currentStableBorrowRate = vars.nextStableRate.toUint128();
reserve.currentVariableBorrowRate = vars.nextVariableRate.toUint128();
emit ReserveDataUpdated(
reserveAddress,
vars.nextLiquidityRate,
vars.nextStableRate,
vars.nextVariableRate,
reserveCache.nextLiquidityIndex,
reserveCache.nextVariableBorrowIndex
);
}
struct AccrueToTreasuryLocalVars {
uint256 prevTotalStableDebt;
uint256 prevTotalVariableDebt;
uint256 currTotalVariableDebt;
uint256 cumulatedStableInterest;
uint256 totalDebtAccrued;
uint256 amountToMint;
}
/**
* @notice Mints part of the repaid interest to the reserve treasury as a function of the reserve factor for the
* specific asset.
* @param reserve The reserve to be updated
* @param reserveCache The caching layer for the reserve data
*/
function _accrueToTreasury(
DataTypes.ReserveData storage reserve,
DataTypes.ReserveCache memory reserveCache
) internal {
AccrueToTreasuryLocalVars memory vars;
if (reserveCache.reserveFactor == 0) {
return;
}
//calculate the total variable debt at moment of the last interaction
vars.prevTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
reserveCache.currVariableBorrowIndex
);
//calculate the new total variable debt after accumulation of the interest on the index
vars.currTotalVariableDebt = reserveCache.currScaledVariableDebt.rayMul(
reserveCache.nextVariableBorrowIndex
);
//calculate the stable debt until the last timestamp update
vars.cumulatedStableInterest = MathUtils.calculateCompoundedInterest(
reserveCache.currAvgStableBorrowRate,
reserveCache.stableDebtLastUpdateTimestamp,
reserveCache.reserveLastUpdateTimestamp
);
vars.prevTotalStableDebt = reserveCache.currPrincipalStableDebt.rayMul(
vars.cumulatedStableInterest
);
//debt accrued is the sum of the current debt minus the sum of the debt at the last update
vars.totalDebtAccrued =
vars.currTotalVariableDebt +
reserveCache.currTotalStableDebt -
vars.prevTotalVariableDebt -
vars.prevTotalStableDebt;
vars.amountToMint = vars.totalDebtAccrued.percentMul(reserveCache.reserveFactor);
if (vars.amountToMint != 0) {
reserve.accruedToTreasury += vars
.amountToMint
.rayDiv(reserveCache.nextLiquidityIndex)
.toUint128();
}
}
/**
* @notice Updates the reserve indexes and the timestamp of the update.
* @param reserve The reserve reserve to be updated
* @param reserveCache The cache layer holding the cached protocol data
*/
function _updateIndexes(
DataTypes.ReserveData storage reserve,
DataTypes.ReserveCache memory reserveCache
) internal {
// Only cumulating on the supply side if there is any income being produced
// The case of Reserve Factor 100% is not a problem (currentLiquidityRate == 0),
// as liquidity index should not be updated
if (reserveCache.currLiquidityRate != 0) {
uint256 cumulatedLiquidityInterest = MathUtils.calculateLinearInterest(
reserveCache.currLiquidityRate,
reserveCache.reserveLastUpdateTimestamp
);
reserveCache.nextLiquidityIndex = cumulatedLiquidityInterest.rayMul(
reserveCache.currLiquidityIndex
);
reserve.liquidityIndex = reserveCache.nextLiquidityIndex.toUint128();
}
// Variable borrow index only gets updated if there is any variable debt.
// reserveCache.currVariableBorrowRate != 0 is not a correct validation,
// because a positive base variable rate can be stored on
// reserveCache.currVariableBorrowRate, but the index should not increase
if (reserveCache.currScaledVariableDebt != 0) {
uint256 cumulatedVariableBorrowInterest = MathUtils.calculateCompoundedInterest(
reserveCache.currVariableBorrowRate,
reserveCache.reserveLastUpdateTimestamp
);
reserveCache.nextVariableBorrowIndex = cumulatedVariableBorrowInterest.rayMul(
reserveCache.currVariableBorrowIndex
);
reserve.variableBorrowIndex = reserveCache.nextVariableBorrowIndex.toUint128();
}
}
/**
* @notice Creates a cache object to avoid repeated storage reads and external contract calls when updating state and
* interest rates.
* @param reserve The reserve object for which the cache will be filled
* @return The cache object
*/
function cache(
DataTypes.ReserveData storage reserve
) internal view returns (DataTypes.ReserveCache memory) {
DataTypes.ReserveCache memory reserveCache;
reserveCache.reserveConfiguration = reserve.configuration;
reserveCache.reserveFactor = reserveCache.reserveConfiguration.getReserveFactor();
reserveCache.currLiquidityIndex = reserveCache.nextLiquidityIndex = reserve.liquidityIndex;
reserveCache.currVariableBorrowIndex = reserveCache.nextVariableBorrowIndex = reserve
.variableBorrowIndex;
reserveCache.currLiquidityRate = reserve.currentLiquidityRate;
reserveCache.currVariableBorrowRate = reserve.currentVariableBorrowRate;
reserveCache.aTokenAddress = reserve.aTokenAddress;
reserveCache.stableDebtTokenAddress = reserve.stableDebtTokenAddress;
reserveCache.variableDebtTokenAddress = reserve.variableDebtTokenAddress;
reserveCache.reserveLastUpdateTimestamp = reserve.lastUpdateTimestamp;
reserveCache.currScaledVariableDebt = reserveCache.nextScaledVariableDebt = IVariableDebtToken(
reserveCache.variableDebtTokenAddress
).scaledTotalSupply();
(
reserveCache.currPrincipalStableDebt,
reserveCache.currTotalStableDebt,
reserveCache.currAvgStableBorrowRate,
reserveCache.stableDebtLastUpdateTimestamp
) = IStableDebtToken(reserveCache.stableDebtTokenAddress).getSupplyData();
// by default the actions are considered as not affecting the debt balances.
// if the action involves mint/burn of debt, the cache needs to be updated
reserveCache.nextTotalStableDebt = reserveCache.currTotalStableDebt;
reserveCache.nextAvgStableBorrowRate = reserveCache.currAvgStableBorrowRate;
return reserveCache;
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
import {WadRayMath} from './WadRayMath.sol';
/**
* @title MathUtils library
* @author Aave
* @notice Provides functions to perform linear and compounded interest calculations
*/
library MathUtils {
using WadRayMath for uint256;
/// @dev Ignoring leap years
uint256 internal constant SECONDS_PER_YEAR = 365 days;
/**
* @dev Function to calculate the interest accumulated using a linear interest rate formula
* @param rate The interest rate, in ray
* @param lastUpdateTimestamp The timestamp of the last update of the interest
* @return The interest rate linearly accumulated during the timeDelta, in ray
*/
function calculateLinearInterest(
uint256 rate,
uint40 lastUpdateTimestamp
) internal view returns (uint256) {
//solium-disable-next-line
uint256 result = rate * (block.timestamp - uint256(lastUpdateTimestamp));
unchecked {
result = result / SECONDS_PER_YEAR;
}
return WadRayMath.RAY + result;
}
/**
* @dev Function to calculate the interest using a compounded interest rate formula
* To avoid expensive exponentiation, the calculation is performed using a binomial approximation:
*
* (1+x)^n = 1+n*x+[n/2*(n-1)]*x^2+[n/6*(n-1)*(n-2)*x^3...
*
* The approximation slightly underpays liquidity providers and undercharges borrowers, with the advantage of great
* gas cost reductions. The whitepaper contains reference to the approximation and a table showing the margin of
* error per different time periods
*
* @param rate The interest rate, in ray
* @param lastUpdateTimestamp The timestamp of the last update of the interest
* @return The interest rate compounded during the timeDelta, in ray
*/
function calculateCompoundedInterest(
uint256 rate,
uint40 lastUpdateTimestamp,
uint256 currentTimestamp
) internal pure returns (uint256) {
//solium-disable-next-line
uint256 exp = currentTimestamp - uint256(lastUpdateTimestamp);
if (exp == 0) {
return WadRayMath.RAY;
}
uint256 expMinusOne;
uint256 expMinusTwo;
uint256 basePowerTwo;
uint256 basePowerThree;
unchecked {
expMinusOne = exp - 1;
expMinusTwo = exp > 2 ? exp - 2 : 0;
basePowerTwo = rate.rayMul(rate) / (SECONDS_PER_YEAR * SECONDS_PER_YEAR);
basePowerThree = basePowerTwo.rayMul(rate) / SECONDS_PER_YEAR;
}
uint256 secondTerm = exp * expMinusOne * basePowerTwo;
unchecked {
secondTerm /= 2;
}
uint256 thirdTerm = exp * expMinusOne * expMinusTwo * basePowerThree;
unchecked {
thirdTerm /= 6;
}
return WadRayMath.RAY + (rate * exp) / SECONDS_PER_YEAR + secondTerm + thirdTerm;
}
/**
* @dev Calculates the compounded interest between the timestamp of the last update and the current block timestamp
* @param rate The interest rate (in ray)
* @param lastUpdateTimestamp The timestamp from which the interest accumulation needs to be calculated
* @return The interest rate compounded between lastUpdateTimestamp and current block timestamp, in ray
*/
function calculateCompoundedInterest(
uint256 rate,
uint40 lastUpdateTimestamp
) internal view returns (uint256) {
return calculateCompoundedInterest(rate, lastUpdateTimestamp, block.timestamp);
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
* @title PercentageMath library
* @author Aave
* @notice Provides functions to perform percentage calculations
* @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
* @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
*/
library PercentageMath {
// Maximum percentage factor (100.00%)
uint256 internal constant PERCENTAGE_FACTOR = 1e4;
// Half percentage factor (50.00%)
uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;
/**
* @notice Executes a percentage multiplication
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param value The value of which the percentage needs to be calculated
* @param percentage The percentage of the value to be calculated
* @return result value percentmul percentage
*/
function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
// to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
assembly {
if iszero(
or(
iszero(percentage),
iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
)
) {
revert(0, 0)
}
result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
}
}
/**
* @notice Executes a percentage division
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param value The value of which the percentage needs to be calculated
* @param percentage The percentage of the value to be calculated
* @return result value percentdiv percentage
*/
function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
// to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
assembly {
if or(
iszero(percentage),
iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
) {
revert(0, 0)
}
result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
/**
* @title WadRayMath library
* @author Aave
* @notice Provides functions to perform calculations with Wad and Ray units
* @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
* with 27 digits of precision)
* @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
*/
library WadRayMath {
// HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
uint256 internal constant WAD = 1e18;
uint256 internal constant HALF_WAD = 0.5e18;
uint256 internal constant RAY = 1e27;
uint256 internal constant HALF_RAY = 0.5e27;
uint256 internal constant WAD_RAY_RATIO = 1e9;
/**
* @dev Multiplies two wad, rounding half up to the nearest wad
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Wad
* @param b Wad
* @return c = a*b, in wad
*/
function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
assembly {
if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
revert(0, 0)
}
c := div(add(mul(a, b), HALF_WAD), WAD)
}
}
/**
* @dev Divides two wad, rounding half up to the nearest wad
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Wad
* @param b Wad
* @return c = a/b, in wad
*/
function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
// to avoid overflow, a <= (type(uint256).max - halfB) / WAD
assembly {
if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
revert(0, 0)
}
c := div(add(mul(a, WAD), div(b, 2)), b)
}
}
/**
* @notice Multiplies two ray, rounding half up to the nearest ray
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Ray
* @param b Ray
* @return c = a raymul b
*/
function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
// to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
assembly {
if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
revert(0, 0)
}
c := div(add(mul(a, b), HALF_RAY), RAY)
}
}
/**
* @notice Divides two ray, rounding half up to the nearest ray
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Ray
* @param b Ray
* @return c = a raydiv b
*/
function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
// to avoid overflow, a <= (type(uint256).max - halfB) / RAY
assembly {
if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
revert(0, 0)
}
c := div(add(mul(a, RAY), div(b, 2)), b)
}
}
/**
* @dev Casts ray down to wad
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Ray
* @return b = a converted to wad, rounded half up to the nearest wad
*/
function rayToWad(uint256 a) internal pure returns (uint256 b) {
assembly {
b := div(a, WAD_RAY_RATIO)
let remainder := mod(a, WAD_RAY_RATIO)
if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
b := add(b, 1)
}
}
}
/**
* @dev Converts wad up to ray
* @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
* @param a Wad
* @return b = a converted in ray
*/
function wadToRay(uint256 a) internal pure returns (uint256 b) {
// to avoid overflow, b/WAD_RAY_RATIO == a
assembly {
b := mul(a, WAD_RAY_RATIO)
if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
revert(0, 0)
}
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
library DataTypes {
struct ReserveData {
//stores the reserve configuration
ReserveConfigurationMap configuration;
//the liquidity index. Expressed in ray
uint128 liquidityIndex;
//the current supply rate. Expressed in ray
uint128 currentLiquidityRate;
//variable borrow index. Expressed in ray
uint128 variableBorrowIndex;
//the current variable borrow rate. Expressed in ray
uint128 currentVariableBorrowRate;
//the current stable borrow rate. Expressed in ray
uint128 currentStableBorrowRate;
//timestamp of last update
uint40 lastUpdateTimestamp;
//the id of the reserve. Represents the position in the list of the active reserves
uint16 id;
//aToken address
address aTokenAddress;
//stableDebtToken address
address stableDebtTokenAddress;
//variableDebtToken address
address variableDebtTokenAddress;
//address of the interest rate strategy
address interestRateStrategyAddress;
//the current treasury balance, scaled
uint128 accruedToTreasury;
//the outstanding unbacked aTokens minted through the bridging feature
uint128 unbacked;
//the outstanding debt borrowed against this asset in isolation mode
uint128 isolationModeTotalDebt;
}
struct ReserveConfigurationMap {
//bit 0-15: LTV
//bit 16-31: Liq. threshold
//bit 32-47: Liq. bonus
//bit 48-55: Decimals
//bit 56: reserve is active
//bit 57: reserve is frozen
//bit 58: borrowing is enabled
//bit 59: stable rate borrowing enabled
//bit 60: asset is paused
//bit 61: borrowing in isolation mode is enabled
//bit 62-63: reserved
//bit 64-79: reserve factor
//bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
//bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
//bit 152-167 liquidation protocol fee
//bit 168-175 eMode category
//bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
//bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
//bit 252-255 unused
uint256 data;
}
struct UserConfigurationMap {
/**
* @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
* The first bit indicates if an asset is used as collateral by the user, the second whether an
* asset is borrowed by the user.
*/
uint256 data;
}
struct EModeCategory {
// each eMode category has a custom ltv and liquidation threshold
uint16 ltv;
uint16 liquidationThreshold;
uint16 liquidationBonus;
// each eMode category may or may not have a custom oracle to override the individual assets price oracles
address priceSource;
string label;
}
enum InterestRateMode {NONE, STABLE, VARIABLE}
struct ReserveCache {
uint256 currScaledVariableDebt;
uint256 nextScaledVariableDebt;
uint256 currPrincipalStableDebt;
uint256 currAvgStableBorrowRate;
uint256 currTotalStableDebt;
uint256 nextAvgStableBorrowRate;
uint256 nextTotalStableDebt;
uint256 currLiquidityIndex;
uint256 nextLiquidityIndex;
uint256 currVariableBorrowIndex;
uint256 nextVariableBorrowIndex;
uint256 currLiquidityRate;
uint256 currVariableBorrowRate;
uint256 reserveFactor;
ReserveConfigurationMap reserveConfiguration;
address aTokenAddress;
address stableDebtTokenAddress;
address variableDebtTokenAddress;
uint40 reserveLastUpdateTimestamp;
uint40 stableDebtLastUpdateTimestamp;
}
struct ExecuteLiquidationCallParams {
uint256 reservesCount;
uint256 debtToCover;
address collateralAsset;
address debtAsset;
address user;
bool receiveAToken;
address priceOracle;
uint8 userEModeCategory;
address priceOracleSentinel;
}
struct ExecuteSupplyParams {
address asset;
uint256 amount;
address onBehalfOf;
uint16 referralCode;
}
struct ExecuteBorrowParams {
address asset;
address user;
address onBehalfOf;
uint256 amount;
InterestRateMode interestRateMode;
uint16 referralCode;
bool releaseUnderlying;
uint256 maxStableRateBorrowSizePercent;
uint256 reservesCount;
address oracle;
uint8 userEModeCategory;
address priceOracleSentinel;
}
struct ExecuteRepayParams {
address asset;
uint256 amount;
InterestRateMode interestRateMode;
address onBehalfOf;
bool useATokens;
}
struct ExecuteWithdrawParams {
address asset;
uint256 amount;
address to;
uint256 reservesCount;
address oracle;
uint8 userEModeCategory;
}
struct ExecuteSetUserEModeParams {
uint256 reservesCount;
address oracle;
uint8 categoryId;
}
struct FinalizeTransferParams {
address asset;
address from;
address to;
uint256 amount;
uint256 balanceFromBefore;
uint256 balanceToBefore;
uint256 reservesCount;
address oracle;
uint8 fromEModeCategory;
}
struct FlashloanParams {
address receiverAddress;
address[] assets;
uint256[] amounts;
uint256[] interestRateModes;
address onBehalfOf;
bytes params;
uint16 referralCode;
uint256 flashLoanPremiumToProtocol;
uint256 flashLoanPremiumTotal;
uint256 maxStableRateBorrowSizePercent;
uint256 reservesCount;
address addressesProvider;
uint8 userEModeCategory;
bool isAuthorizedFlashBorrower;
}
struct FlashloanSimpleParams {
address receiverAddress;
address asset;
uint256 amount;
bytes params;
uint16 referralCode;
uint256 flashLoanPremiumToProtocol;
uint256 flashLoanPremiumTotal;
}
struct FlashLoanRepaymentParams {
uint256 amount;
uint256 totalPremium;
uint256 flashLoanPremiumToProtocol;
address asset;
address receiverAddress;
uint16 referralCode;
}
struct CalculateUserAccountDataParams {
UserConfigurationMap userConfig;
uint256 reservesCount;
address user;
address oracle;
uint8 userEModeCategory;
}
struct ValidateBorrowParams {
ReserveCache reserveCache;
UserConfigurationMap userConfig;
address asset;
address userAddress;
uint256 amount;
InterestRateMode interestRateMode;
uint256 maxStableLoanPercent;
uint256 reservesCount;
address oracle;
uint8 userEModeCategory;
address priceOracleSentinel;
bool isolationModeActive;
address isolationModeCollateralAddress;
uint256 isolationModeDebtCeiling;
}
struct ValidateLiquidationCallParams {
ReserveCache debtReserveCache;
uint256 totalDebt;
uint256 healthFactor;
address priceOracleSentinel;
}
struct CalculateInterestRatesParams {
uint256 unbacked;
uint256 liquidityAdded;
uint256 liquidityTaken;
uint256 totalStableDebt;
uint256 totalVariableDebt;
uint256 averageStableBorrowRate;
uint256 reserveFactor;
address reserve;
address aToken;
}
struct InitReserveParams {
address asset;
address aTokenAddress;
address stableDebtAddress;
address variableDebtAddress;
address interestRateStrategyAddress;
uint16 reservesCount;
uint16 maxNumberReserves;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC1271 standard signature validation method for
* contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
*
* _Available since v4.1._
*/
interface IERC1271Upgradeable {
/**
* @dev Should return whether the signature provided is valid for the provided data
* @param hash Hash of the data to be signed
* @param signature Signature byte array associated with _data
*/
function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```solidity
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
*
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized != type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuardUpgradeable is Initializable {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
function __ReentrancyGuard_init() internal onlyInitializing {
__ReentrancyGuard_init_unchained();
}
function __ReentrancyGuard_init_unchained() internal onlyInitializing {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
/**
* @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
* `nonReentrant` function in the call stack.
*/
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == _ENTERED;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "./IERC1155Upgradeable.sol";
import "./IERC1155ReceiverUpgradeable.sol";
import "./extensions/IERC1155MetadataURIUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC1155Upgradeable, IERC1155MetadataURIUpgradeable {
using AddressUpgradeable for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
function __ERC1155_init(string memory uri_) internal onlyInitializing {
__ERC1155_init_unchained(uri_);
}
function __ERC1155_init_unchained(string memory uri_) internal onlyInitializing {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
return
interfaceId == type(IERC1155Upgradeable).interfaceId ||
interfaceId == type(IERC1155MetadataURIUpgradeable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: address zero is not a valid owner");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] memory accounts,
uint256[] memory ids
) public view virtual override returns (uint256[] memory) {
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(address to, uint256 id, uint256 amount, bytes memory data) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(address from, uint256 id, uint256 amount) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(address from, uint256[] memory ids, uint256[] memory amounts) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `ids` and `amounts` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
/**
* @dev Hook that is called after any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155ReceiverUpgradeable.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155ReceiverUpgradeable.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[47] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "../IERC1155Upgradeable.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURIUpgradeable is IERC1155Upgradeable {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155ReceiverUpgradeable is IERC165Upgradeable {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(
address[] calldata accounts,
uint256[] calldata ids
) external view returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)
pragma solidity ^0.8.0;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../StringsUpgradeable.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSAUpgradeable {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, "\x19Ethereum Signed Message:\n32")
mstore(0x1c, hash)
message := keccak256(0x00, 0x3c)
}
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", StringsUpgradeable.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
/// @solidity memory-safe-assembly
assembly {
let ptr := mload(0x40)
mstore(ptr, "\x19\x01")
mstore(add(ptr, 0x02), domainSeparator)
mstore(add(ptr, 0x22), structHash)
data := keccak256(ptr, 0x42)
}
}
/**
* @dev Returns an Ethereum Signed Data with intended validator, created from a
* `validator` and `data` according to the version 0 of EIP-191.
*
* See {recover}.
*/
function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x00", validator, data));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/SignatureChecker.sol)
pragma solidity ^0.8.0;
import "./ECDSAUpgradeable.sol";
import "../../interfaces/IERC1271Upgradeable.sol";
/**
* @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA
* signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like
* Argent and Gnosis Safe.
*
* _Available since v4.1._
*/
library SignatureCheckerUpgradeable {
/**
* @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
* signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.
*
* NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
* change through time. It could return true at block N and false at block N+1 (or the opposite).
*/
function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {
(address recovered, ECDSAUpgradeable.RecoverError error) = ECDSAUpgradeable.tryRecover(hash, signature);
return
(error == ECDSAUpgradeable.RecoverError.NoError && recovered == signer) ||
isValidERC1271SignatureNow(signer, hash, signature);
}
/**
* @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
* against the signer smart contract using ERC1271.
*
* NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
* change through time. It could return true at block N and false at block N+1 (or the opposite).
*/
function isValidERC1271SignatureNow(
address signer,
bytes32 hash,
bytes memory signature
) internal view returns (bool) {
(bool success, bytes memory result) = signer.staticcall(
abi.encodeWithSelector(IERC1271Upgradeable.isValidSignature.selector, hash, signature)
);
return (success &&
result.length >= 32 &&
abi.decode(result, (bytes32)) == bytes32(IERC1271Upgradeable.isValidSignature.selector));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal onlyInitializing {
}
function __ERC165_init_unchained() internal onlyInitializing {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library MathUpgradeable {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
// Solidity will revert if denominator == 0, unlike the div opcode on its own.
// The surrounding unchecked block does not change this fact.
// See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1, "Math: mulDiv overflow");
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10 ** 64) {
value /= 10 ** 64;
result += 64;
}
if (value >= 10 ** 32) {
value /= 10 ** 32;
result += 32;
}
if (value >= 10 ** 16) {
value /= 10 ** 16;
result += 16;
}
if (value >= 10 ** 8) {
value /= 10 ** 8;
result += 8;
}
if (value >= 10 ** 4) {
value /= 10 ** 4;
result += 4;
}
if (value >= 10 ** 2) {
value /= 10 ** 2;
result += 2;
}
if (value >= 10 ** 1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 256, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard signed math utilities missing in the Solidity language.
*/
library SignedMathUpgradeable {
/**
* @dev Returns the largest of two signed numbers.
*/
function max(int256 a, int256 b) internal pure returns (int256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two signed numbers.
*/
function min(int256 a, int256 b) internal pure returns (int256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two signed numbers without overflow.
* The result is rounded towards zero.
*/
function average(int256 a, int256 b) internal pure returns (int256) {
// Formula from the book "Hacker's Delight"
int256 x = (a & b) + ((a ^ b) >> 1);
return x + (int256(uint256(x) >> 255) & (a ^ b));
}
/**
* @dev Returns the absolute unsigned value of a signed value.
*/
function abs(int256 n) internal pure returns (uint256) {
unchecked {
// must be unchecked in order to support `n = type(int256).min`
return uint256(n >= 0 ? n : -n);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/MathUpgradeable.sol";
import "./math/SignedMathUpgradeable.sol";
/**
* @dev String operations.
*/
library StringsUpgradeable {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = MathUpgradeable.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `int256` to its ASCII `string` decimal representation.
*/
function toString(int256 value) internal pure returns (string memory) {
return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMathUpgradeable.abs(value))));
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, MathUpgradeable.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
/**
* @dev Returns true if the two strings are equal.
*/
function equal(string memory a, string memory b) internal pure returns (bool) {
return keccak256(bytes(a)) == keccak256(bytes(b));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* ==== Security Considerations
*
* There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
* expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
* considered as an intention to spend the allowance in any specific way. The second is that because permits have
* built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
* take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
* generally recommended is:
*
* ```solidity
* function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
* try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
* doThing(..., value);
* }
*
* function doThing(..., uint256 value) public {
* token.safeTransferFrom(msg.sender, address(this), value);
* ...
* }
* ```
*
* Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
* `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
* {SafeERC20-safeTransferFrom}).
*
* Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
* contracts should have entry points that don't rely on permit.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*
* CAUTION: See Security Considerations above.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
* to be set to zero before setting it to a non-zero value, such as USDT.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
interface IDNTStrategy {
function getMakerPayoff(uint256[2] memory anchorPrices, uint256[2] memory settlePrices, uint256 maxPayoff) external pure returns (uint256);
function getMinterPayoff(uint256[2] memory anchorPrices, uint256[2] memory settlePrices, uint256 maxPayoff) external pure returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
interface IFeeCollector {
function tradingFeeRate() external view returns (uint256);
function settlementFeeRate() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
interface IHlOracle {
function settlePrices(uint256, uint256) external view returns (uint256);
function settle() external;
function getHlPrices(uint256 term, uint256 expiry) external view returns (uint256[2] memory);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// Minimal Permit2 interface, derived from
// https://github.com/Uniswap/permit2/blob/main/src/interfaces/ISignatureTransfer.sol
interface IPermit2 {
// Token and amount in a permit message.
struct TokenPermissions {
// Token to transfer.
IERC20 token;
// Amount to transfer.
uint256 amount;
}
// The permit2 message.
struct PermitTransferFrom {
// Permitted token and amount.
TokenPermissions permitted;
// Unique identifier for this permit.
uint256 nonce;
// Expiration for this permit.
uint256 deadline;
}
// Transfer details for permitTransferFrom().
struct SignatureTransferDetails {
// Recipient of tokens.
address to;
// Amount to transfer.
uint256 requestedAmount;
}
// Consume a permit2 message and transfer tokens.
function permitTransferFrom(
PermitTransferFrom calldata permit,
SignatureTransferDetails calldata transferDetails,
address owner,
bytes calldata signature
) external;
function nonceBitmap(address owner, uint256 wordPos) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
interface IWETH {
function balanceOf(address) external view returns (uint256);
function deposit() external payable;
function withdraw(uint256) external;
function approve(address guy, uint256 wad) external returns (bool);
function transferFrom(
address src,
address dst,
uint256 wad
) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
contract SignatureBitMap {
mapping(uint256 => uint256) private signatures;
function consumeSignature(bytes memory signature) internal {
uint256 signatureInt = uint256(keccak256(signature));
uint256 wordIndex = signatureInt / 256;
uint256 bitIndex = signatureInt % 256;
signatures[wordIndex] |= (1 << bitIndex);
}
function isSignatureConsumed(bytes memory signature) internal view returns (bool) {
uint256 signatureInt = uint256(keccak256(signature));
uint256 wordIndex = signatureInt / 256;
uint256 bitIndex = signatureInt % 256;
uint256 mask = (1 << bitIndex);
return (signatures[wordIndex] & mask) == mask;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC1155/ERC1155Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/cryptography/SignatureCheckerUpgradeable.sol";
import {IPool} from "@aave/core-v3/contracts/interfaces/IPool.sol";
import {DataTypes} from "@aave/core-v3/contracts/protocol/libraries/types/DataTypes.sol";
import {ReserveLogic} from "@aave/core-v3/contracts/protocol/libraries/logic/ReserveLogic.sol";
import {IAToken} from "@aave/core-v3/contracts/interfaces/IAToken.sol";
import "../interfaces/IWETH.sol";
import "../interfaces/IPermit2.sol";
import "../interfaces/IDNTStrategy.sol";
import "../interfaces/IHlOracle.sol";
import "../interfaces/IFeeCollector.sol";
import "../utils/SignatureBitMap.sol";
contract AAVEDNTVault is Initializable, ContextUpgradeable, ERC1155Upgradeable, ReentrancyGuardUpgradeable, SignatureBitMap {
using SafeERC20 for IERC20Metadata;
using ReserveLogic for DataTypes.ReserveData;
using SignatureCheckerUpgradeable for address;
struct Product {
uint256 term;
uint256 expiry;
uint256[2] anchorPrices;
uint256 collateralAtRiskPercentage;
uint256 isMaker;
}
struct MintParams {
uint256 expiry;
uint256[2] anchorPrices;
uint256 collateralAtRisk;
uint256 makerCollateral;
uint256 deadline;
address maker;
bytes makerSignature;
}
bytes32 public DOMAIN_SEPARATOR;
// bytes32 public constant EIP712DOMAIN_TYPEHASH = keccak256(
// "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
// );
bytes32 public constant EIP712DOMAIN_TYPEHASH = 0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f;
// bytes32 public constant MINT_TYPEHASH = keccak256(
// "Mint(address minter,uint256 totalCollateral,uint256 expiry,uint256[2] anchorPrices,uint256 collateralAtRisk,uint256 makerCollateral,uint256 deadline,address vault)"
// );
bytes32 public constant MINT_TYPEHASH = 0xbbb96bd81b8359e3021ab4bd0188b2fb99443a6debe51f7cb0a925a398f17117;
// Aave Referral Code
uint16 private constant REFERRAL_CODE = 0;
// Aave Share Multiplier
uint256 private constant SHARE_MULTIPLIER = 1e18;
string public name;
string public symbol;
IWETH public weth;
IPermit2 public permit2;
IDNTStrategy public strategy;
IERC20Metadata public collateral;
IPool public pool;
IAToken public aToken;
IHlOracle public oracle;
uint256 totalSupply;
uint256 public totalFee;
address public feeCollector;
// Events
event Minted(address minter, address maker, address referral, uint256 totalCollateral, uint256 term, uint256 expiry, uint256[2] anchorPrices, uint256 makerCollateral, uint256 collateralAtRiskPercentage);
event Burned(address operator, uint256 productId, uint256 amount, uint256 payoff);
event BatchBurned(address operator, uint256[] productIds, uint256[] amounts, uint256[] payoffs);
event FeeCollected(address collector, uint256 amount);
modifier onlyETHVault() {
require(address(collateral) == address(weth), "Vault: only ETH vault");
_;
}
receive() external payable {}
function initialize(
string memory name_,
string memory symbol_,
IPermit2 permit_,
IDNTStrategy strategy_,
address weth_,
address collateral_,
IPool pool_,
address feeCollector_,
IHlOracle oracle_
) initializer external {
name = name_;
symbol = symbol_;
weth = IWETH(weth_);
permit2 = permit_;
strategy = strategy_;
collateral = IERC20Metadata(collateral_);
oracle = oracle_;
pool = pool_;
aToken = IAToken(pool_.getReserveData(address(collateral_)).aTokenAddress);
DOMAIN_SEPARATOR = keccak256(
abi.encode(
EIP712DOMAIN_TYPEHASH,
keccak256("Vault"),
keccak256("1.0"),
block.chainid,
address(this)
)
);
feeCollector = feeCollector_;
// Approve once for max amount
collateral.safeApprove(address(pool_), type(uint256).max);
__Context_init();
__ERC1155_init("");
__ReentrancyGuard_init();
}
function mint(
uint256 totalCollateral,
MintParams calldata params,
bytes calldata minterPermitSignature,
uint256 nonce,
address referral
) external {
// transfer collateral
uint256 depositAmount = totalCollateral - params.makerCollateral;
permit2.permitTransferFrom(
IPermit2.PermitTransferFrom({
permitted: IPermit2.TokenPermissions({
token: collateral,
amount: depositAmount
}),
nonce: nonce,
deadline: params.deadline
}),
IPermit2.SignatureTransferDetails({
to: address(this),
requestedAmount: depositAmount
}),
_msgSender(),
minterPermitSignature
);
_mint(totalCollateral, params, referral);
}
function mint(
MintParams calldata params,
address referral
) external payable onlyETHVault {
weth.deposit{value: msg.value}();
_mint(
params.makerCollateral + msg.value,
params,
referral
);
}
function _mint(uint256 totalCollateral, MintParams memory params, address referral) internal nonReentrant {
require(block.timestamp < params.deadline, "Vault: deadline");
require(block.timestamp < params.expiry, "Vault: expired");
// require expiry must be 8:00 UTC
require(params.expiry % 86400 == 28800, "Vault: invalid expiry");
require(params.anchorPrices[0] < params.anchorPrices[1], "Vault: invalid strike prices");
require(!isSignatureConsumed(params.makerSignature), "Vault: signature consumed");
require(referral != _msgSender(), "Vault: invalid referral");
{
// verify maker's signature
bytes32 digest =
keccak256(abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR,
keccak256(abi.encode(MINT_TYPEHASH,
_msgSender(),
totalCollateral,
params.expiry,
keccak256(abi.encodePacked(params.anchorPrices)),
params.collateralAtRisk,
params.makerCollateral,
params.deadline,
address(this)))
));
require(params.maker.isValidSignatureNow(digest, params.makerSignature), "Vault: invalid maker signature");
consumeSignature(params.makerSignature);
// transfer makercollateral
collateral.safeTransferFrom(params.maker, address(this), params.makerCollateral);
}
// calculate atoken shares
uint256 term;
uint256 tradingFee = IFeeCollector(feeCollector).tradingFeeRate() * (params.collateralAtRisk - params.makerCollateral) / 1e18;
uint256 collateralAtRiskPercentage = params.collateralAtRisk * 1e18 / (totalCollateral - tradingFee);
require(collateralAtRiskPercentage > 0 && collateralAtRiskPercentage <= 1e18, "Vault: invalid collateral");
{
uint256 aTokenShare;
pool.supply(address(collateral), totalCollateral, address(this), REFERRAL_CODE);
uint256 aTokenBalance = aToken.balanceOf(address(this));
if (totalSupply > 0) {
aTokenShare = totalCollateral * totalSupply / (aTokenBalance - totalCollateral);
} else {
aTokenShare = totalCollateral * SHARE_MULTIPLIER;
}
totalSupply += aTokenShare;
// trading fee
uint256 tradingFeeShare = aTokenShare * tradingFee / totalCollateral;
aTokenShare -= tradingFeeShare;
totalFee += tradingFeeShare;
// mint product
// startDate = ((expiry-28800)/86400+1)*86400+28800
term = (params.expiry - (((block.timestamp - 28800) / 86400 + 1) * 86400 + 28800)) / 86400;
require(term > 0, "Vault: invalid term");
uint256 productId = getProductId(term, params.expiry, params.anchorPrices, collateralAtRiskPercentage, uint256(0));
uint256 makerProductId = getProductId(term, params.expiry, params.anchorPrices, collateralAtRiskPercentage, uint256(1));
_mint(_msgSender(), productId, aTokenShare, "");
_mint(params.maker, makerProductId, aTokenShare, "");
}
emit Minted(_msgSender(), params.maker, referral, totalCollateral, term, params.expiry, params.anchorPrices, params.makerCollateral, collateralAtRiskPercentage);
}
function burn(uint256 term, uint256 expiry, uint256[2] calldata anchorPrices, uint256 collateralAtRiskPercentage, uint256 isMaker) external {
uint256 payoff = _burn(term, expiry, anchorPrices, collateralAtRiskPercentage, isMaker);
if (payoff > 0) {
require(pool.withdraw(address(collateral), payoff, _msgSender()) > 0, "Vault: withdraw failed");
}
}
function ethBurn(uint256 term, uint256 expiry, uint256[2] calldata anchorPrices, uint256 collateralAtRiskPercentage, uint256 isMaker) external onlyETHVault {
uint256 payoff = _burn(term, expiry, anchorPrices, collateralAtRiskPercentage, isMaker);
if (payoff > 0) {
require(pool.withdraw(address(collateral), payoff, address(this)) > 0, "Vault: withdraw failed");
weth.withdraw(payoff);
(bool success, ) = _msgSender().call{value: payoff, gas: 100_000}("");
require(success, "Failed to send ETH");
}
}
function _burn(uint256 term, uint256 expiry, uint256[2] memory anchorPrices, uint256 collateralAtRiskPercentage, uint256 isMaker) internal nonReentrant returns (uint256 payoff) {
(uint256 latestTerm, uint256 latestExpiry, bool _isBurnable) = isBurnable(term, expiry, anchorPrices);
require(_isBurnable, "Vault: not burnable");
// check if settled
require(oracle.settlePrices(latestExpiry, 1) > 0, "Vault: not settled");
uint256 productId = getProductId(term, expiry, anchorPrices, collateralAtRiskPercentage, isMaker);
uint256 amount = balanceOf(_msgSender(), productId);
require(amount > 0, "Vault: zero amount");
// calculate payoff by strategy
uint256 payoffShare;
if (isMaker == 1) {
payoffShare = getMakerPayoff(latestTerm, latestExpiry, anchorPrices, collateralAtRiskPercentage, amount);
} else {
uint256 settlementFee;
(payoffShare, settlementFee) = getMinterPayoff(latestTerm, latestExpiry, anchorPrices, collateralAtRiskPercentage, amount);
if (settlementFee > 0) {
totalFee += settlementFee;
}
}
// check self balance of collateral and transfer payoff
if (payoffShare > 0) {
payoff = payoffShare * aToken.balanceOf(address(this)) / totalSupply;
totalSupply -= payoffShare;
emit Burned(_msgSender(), productId, amount, payoff);
} else {
emit Burned(_msgSender(), productId, amount, 0);
}
// burn product
_burn(_msgSender(), productId, amount);
}
function burnBatch(Product[] calldata products) external {
uint256 totalPayoff = _burnBatch(products);
if (totalPayoff > 0) {
require(pool.withdraw(address(collateral), totalPayoff, _msgSender()) > 0, "Vault: withdraw failed");
}
}
function ethBurnBatch(Product[] calldata products) external onlyETHVault {
uint256 totalPayoff = _burnBatch(products);
if (totalPayoff > 0) {
require(pool.withdraw(address(collateral), totalPayoff, address(this)) > 0, "Vault: withdraw failed");
weth.withdraw(totalPayoff);
(bool success, ) = _msgSender().call{value: totalPayoff, gas: 100_000}("");
require(success, "Failed to send ETH");
}
}
function _burnBatch(Product[] calldata products) internal nonReentrant returns (uint256 totalPayoff) {
uint256 totalPayoffShare = 0;
uint256[] memory productIds = new uint256[](products.length);
uint256[] memory amounts = new uint256[](products.length);
uint256[] memory payoffs = new uint256[](products.length);
uint256 aTokenBalance = aToken.balanceOf(address(this));
uint256 settlementFee;
for (uint256 i = 0; i < products.length; i++) {
Product memory product = products[i];
(uint256 latestTerm, uint256 latestExpiry, bool _isBurnable) = isBurnable(product.term, product.expiry, product.anchorPrices);
require(_isBurnable, "Vault: not burnable");
// check if settled
require(oracle.settlePrices(latestExpiry, 1) > 0, "Vault: not settled");
uint256 productId = getProductId(product.term, product.expiry, product.anchorPrices, product.collateralAtRiskPercentage, product.isMaker);
uint256 amount = balanceOf(_msgSender(), productId);
require(amount > 0, "Vault: zero amount");
// calculate payoff by strategy
uint256 payoffShare;
if (product.isMaker == 1) {
payoffShare = getMakerPayoff(latestTerm, latestExpiry, product.anchorPrices, product.collateralAtRiskPercentage, amount);
} else {
uint256 fee;
(payoffShare, fee) = getMinterPayoff(latestTerm, latestExpiry, product.anchorPrices, product.collateralAtRiskPercentage, amount);
if (fee > 0) {
settlementFee += fee;
}
}
if (payoffShare > 0) {
totalPayoffShare += payoffShare;
}
productIds[i] = productId;
amounts[i] = amount;
payoffs[i] = payoffShare * aTokenBalance / totalSupply;
}
if (settlementFee > 0) {
totalFee += settlementFee;
}
// check self balance of collateral and transfer payoff
if (totalPayoffShare > 0) {
totalPayoff = totalPayoffShare * aTokenBalance / totalSupply;
totalSupply -= totalPayoffShare;
}
// burn product
_burnBatch(_msgSender(), productIds, amounts);
emit BatchBurned(_msgSender(), productIds, amounts, payoffs);
}
// withdraw fee
function harvest() external {
uint256 fee = totalFee;
require(fee > 0, "Vault: zero fee");
totalFee = 0;
uint256 payoff = fee * aToken.balanceOf(address(this)) / totalSupply;
totalSupply -= fee;
require(pool.withdraw(address(collateral), payoff, feeCollector) > 0, "Vault: withdraw failed");
emit FeeCollected(_msgSender(), payoff);
}
function getMakerPayoff(uint256 term, uint256 expiry, uint256[2] memory anchorPrices, uint256 collateralAtRiskPercentage, uint256 amount) public view returns (uint256 payoffShare) {
uint256 maxPayoff = amount * collateralAtRiskPercentage / 1e18;
payoffShare = strategy.getMakerPayoff(anchorPrices, oracle.getHlPrices(term, expiry), maxPayoff);
}
function getMinterPayoff(uint256 term, uint256 expiry, uint256[2] memory anchorPrices, uint256 collateralAtRiskPercentage, uint256 amount) public view returns (uint256 payoffShare, uint256 fee) {
uint256 maxPayoff = amount * collateralAtRiskPercentage / 1e18;
uint256 payoffShareWithFee = strategy.getMinterPayoff(anchorPrices, oracle.getHlPrices(term, expiry), maxPayoff);
fee = payoffShareWithFee * IFeeCollector(feeCollector).settlementFeeRate() / 1e18;
payoffShare = payoffShareWithFee - fee + (amount * 1e18 - amount * collateralAtRiskPercentage) / 1e18;
}
// get product id by term, expiry and strike prices
function getProductId(uint256 term, uint256 expiry, uint256[2] memory anchorPrices, uint256 collateralAtRiskPercentage, uint256 isMaker) public pure returns (uint256) {
return uint256(keccak256(abi.encodePacked(term, expiry, anchorPrices, collateralAtRiskPercentage, isMaker)));
}
// get decimals
function decimals() external view returns (uint8) {
return collateral.decimals();
}
// check if the product is burnable
function isBurnable(uint256 term, uint256 expiry, uint256[2] memory anchorPrices)
public
view
returns (uint256, uint256, bool)
{
if (expiry <= block.timestamp) {
return (term, expiry, true);
} else {
uint256 latestExpiry = (block.timestamp - 28800) / 86400 * 86400 + 28800;
uint256 termGap = (expiry - latestExpiry) / 86400;
if (termGap > term) {
return (term, latestExpiry, false);
} else {
uint256 latestTerm = term - termGap;
uint256[2] memory prices = oracle.getHlPrices(latestTerm, latestExpiry);
return(latestTerm, latestExpiry, prices[0] <= anchorPrices[0] || prices[1] >= anchorPrices[1]);
}
}
}
uint256[50] private __gap;
}