Contract Source Code:
File 1 of 1 : MOMOM
// File: @openzeppelin/contracts/utils/math/Math.sol
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File: @openzeppelin/contracts/utils/cryptography/ECDSA.sol
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/security/Pausable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: contracts/Variables.sol
pragma solidity ^0.8.9;
contract Variables is Ownable{
//SET Variables
bool public customPrice = false;
uint256 public custom_price = 0.0011 ether;
bool public canRenounceOwnership = false;
//mint variables
bool public soldOut = false;
bool public freeClaimOpen = false;
bool public burnMomomCommomOpen = false;
bool public burnMomomUncommomOpen = false;
bool public burnMomomRareOpen = false;
bool public burnMomomEpicOpen = false;
bool public mintOpen = false;
bool public rewardAllMomomsOpen = false;
uint256 public maxQtyRewardAllMomom = 2;
uint256 public qtyRewardedAllMomom = 0;
uint256 public qtyMinBonusMint1 = 5;
uint256 public qtyBonusMint1 = 1;
uint256 public qtyMinBonusMint2 = 10;
uint256 public qtyBonusMint2 = 2;
bool public enableTsukiPrice = false;
uint256 public custom_price_tsuki = 0.0009 ether;
string public baseTokenURI;
//Set methods
function setCustomPriceTsuki(bool enable, uint256 value) public onlyOwner {
enableTsukiPrice = enable;
custom_price_tsuki = value;
}
function setBonusMint1(uint256 qtyMinBonusMint, uint qtyBonusMint) public onlyOwner {
qtyMinBonusMint1 = qtyMinBonusMint;
qtyBonusMint1 = qtyBonusMint;
}
function setBonusMint2(uint256 qtyMinBonusMint, uint qtyBonusMint) public onlyOwner {
qtyMinBonusMint2 = qtyMinBonusMint;
qtyBonusMint2 = qtyBonusMint;
}
function setBurnMomomCommomOpen(bool _state) public onlyOwner {
burnMomomCommomOpen = _state;
}
function setBurnMomomUncommomOpen(bool _state) public onlyOwner {
burnMomomUncommomOpen = _state;
}
function setBurnMomomRareOpen(bool _state) public onlyOwner {
burnMomomRareOpen = _state;
}
function setBurnMomomEpicOpen(bool _state) public onlyOwner {
burnMomomEpicOpen = _state;
}
function setMintOpen(bool _state) public onlyOwner {
mintOpen = _state;
}
function setRewardAllMomomsOpen(bool _state) public onlyOwner {
rewardAllMomomsOpen = _state;
}
function setFreeClaimOpen(bool _state) public onlyOwner {
freeClaimOpen = _state;
}
function setSoldOut(bool _state) public onlyOwner {
soldOut = _state;
}
function setMaxQtyRewardAllMomom(uint256 maxQtyReward) external onlyOwner {
maxQtyRewardAllMomom = maxQtyReward;
}
function setCustomPrice(bool isCustomPrice, uint256 price) external onlyOwner {
customPrice = isCustomPrice;
custom_price = price;
}
function setCanRenounceOwnership(bool _state) external onlyOwner {
canRenounceOwnership = _state;
}
}
// File: contracts/BurnTsuki.sol
pragma solidity ^0.8.7;
interface IERC721{
function ownerOf(uint256 _tokenId) external view returns (address);
function safeTransferFrom(address _from, address _to, uint256 _tokenId) external payable;
function transferFrom(address _from, address _to, uint256 _tokenId) external payable;
function setApprovalForAll(address _from, bool state) external;
function burn(uint256) external payable;
function getApproved(uint256 tokenId) external view returns (address operator);
function isApprovedForAll(address owner, address operator) external view returns (bool);
function balanceOf(address owner) external view returns (uint256);
}
contract BurnTsuki is Ownable {
//for burn
address public tsukiNftAddress=0x0000000000000000000000000000000000000000;
address public tsukiBurnAddress=0x0000000000000000000000000000000000000001;
bool public burnTsuki1Open = false;
bool public burnTsuki2Open = false;
bool public burnTsuki3Open = false;
bool public burnTsuki4Open = false;
bool public burnTsuki5Open = false;
constructor() {}
//Set methods
function setTsukiNftAddress(address _address) public onlyOwner {
tsukiNftAddress = _address;
}
function setTsukiBurnAddress(address _address) public onlyOwner {
tsukiBurnAddress = _address;
}
function setTsuki1Open(bool _state) public onlyOwner {
burnTsuki1Open = _state;
}
function setTsuki2Open(bool _state) public onlyOwner {
burnTsuki2Open = _state;
}
function setTsuki3Open(bool _state) public onlyOwner {
burnTsuki3Open = _state;
}
function setTsuki4Open(bool _state) public onlyOwner {
burnTsuki4Open = _state;
}
function setTsuki5Open(bool _state) public onlyOwner {
burnTsuki5Open = _state;
}
modifier callerIsUser() {
require(tx.origin == msg.sender, "Must from real wallet address");
_;
}
function getOwner(uint256 tsukiTokenId) public view returns (address){
return IERC721(tsukiNftAddress).ownerOf(tsukiTokenId);
}
function getBalaceOfTsuki() public view returns (uint256){
return IERC721(tsukiNftAddress).balanceOf(msg.sender);
}
function bT(uint256[] memory tsukiTokenIds)
public
callerIsUser
{
if(tsukiTokenIds.length==1){
require(burnTsuki1Open,"Burn 1 tsuki is not opened!");
}else if(tsukiTokenIds.length==2){
require(burnTsuki1Open,"Burn 2 tsuki is not opened!");
}else if(tsukiTokenIds.length==3){
require(burnTsuki1Open,"Burn 3 tsuki is not opened!");
}else if(tsukiTokenIds.length==4){
require(burnTsuki1Open,"Burn 4 tsuki is not opened!");
}else if(tsukiTokenIds.length==5){
require(burnTsuki1Open,"Burn 5 tsuki is not opened!");
}else{
require(false,"Burn Quant wrong!");
}
for (uint i = 0; i < tsukiTokenIds.length; i++) {
address owner = IERC721(tsukiNftAddress).ownerOf(tsukiTokenIds[i]);
require(msg.sender == owner, "Error: Not ERC721 owner");
IERC721(tsukiNftAddress).transferFrom(msg.sender,tsukiBurnAddress,tsukiTokenIds[i]);
}
}
function getBurnAddress() public view returns (address){
return address(this);
}
function isApprovedForAllBurn(address owner, address operator) external view returns (bool){
return IERC721(tsukiNftAddress).isApprovedForAll(owner, operator);
}
}
// File: contracts/CommitReveal.sol
pragma solidity ^0.8.9;
contract CommitReveal is Ownable {
uint public maxBlocksAhead = 250;
//setter
function setMaxBlocksAhead(uint qtd) public onlyOwner {
maxBlocksAhead = qtd;
}
struct Commit {
bytes32 commit;
uint256 block;
bool revealed;
}
mapping (address => Commit) public commits;
function saveGeneratedHash(bytes32 dataHash) public {
commits[msg.sender].commit = dataHash;
commits[msg.sender].block = uint256(block.number);
commits[msg.sender].revealed = false;
emit CommitHash(msg.sender,commits[msg.sender].commit,commits[msg.sender].block);
}
event CommitHash(address sender, bytes32 dataHash, uint256 block);
function generateRandom(bytes32 revealHash) public returns (uint){
//make sure it hasn't been revealeld yet and set it to revealed
require(commits[msg.sender].revealed==false,"Already revealed");
commits[msg.sender].revealed=true;
//require that they can produce the committed hash
require(getHash(revealHash)==commits[msg.sender].commit,"Revealed hash does not match commit");
//require that the block number is greater than the original block
require(uint64(block.number)>commits[msg.sender].block,"Reveal and commit happened on the same block");
//require that no more than 250 blocks have passed
require(uint64(block.number)<=commits[msg.sender].block+maxBlocksAhead,"Revealed too late");
//get the hash of the block that happened after they committed
bytes32 blockHash = blockhash(commits[msg.sender].block);
//hash that with their reveal that so miner shouldn't know and mod it with some max number you want
uint random = uint(keccak256(abi.encodePacked(blockHash,revealHash)));
/*emit RevealHash(msg.sender,revealHash,random);*/
return random;
}
function blockNumber() public view returns (uint256){
return uint256(block.number);
}
function getHash(bytes32 data) public view returns(bytes32){
return keccak256(abi.encodePacked(address(this), data));
}
}
// File: contracts/Random.sol
pragma solidity ^0.8.9;
contract Random is Ownable, CommitReveal {
// Initializing the state variable
uint randNonce = 0;
//setvariables
uint public lowerLegendary = 9900;
uint public upperLegendary = 9910;
uint public lowerEpic = 8000;
uint public upperEpic = 8200;
uint public lowerRare = 6000;
uint public upperRare = 6800;
uint public lowerUncommom = 3000;
uint public upperUncommom = 5500;
uint public qtdCommom = 60;
uint public qtdUncommom = 30;
uint public qtdRare = 15;
uint public qtdEpic = 5;
uint public qtdLegendary = 1;
//setter
function setQtdCommom(uint qtd) public onlyOwner {
qtdCommom = qtd;
}
function setQtdUncommom(uint qtd) public onlyOwner {
qtdUncommom = qtd;
}
function setQtdRare(uint qtd) public onlyOwner {
qtdRare = qtd;
}
function setQtdEpic(uint qtd) public onlyOwner {
qtdEpic = qtd;
}
function setQtdLegendary(uint qtd) public onlyOwner {
qtdLegendary = qtd;
}
function setProbLegendary(uint lower, uint upper) public onlyOwner {
upperLegendary = upper;
lowerLegendary = lower;
}
function setProbEpic(uint lower, uint upper) public onlyOwner {
upperEpic = upper;
lowerEpic = lower;
}
function setProbRare(uint lower, uint upper) public onlyOwner {
upperRare = upper;
lowerRare = lower;
}
function setProbUncommom(uint lower, uint upper) public onlyOwner {
upperUncommom = upper;
lowerUncommom = lower;
}
function validateCommom(uint256[] memory tsukiTokenIds) public view returns (bool) {
for (uint256 i = 0; i < tsukiTokenIds.length; i++) {
if(100>tsukiTokenIds[i] || tsukiTokenIds[i]>=(100+qtdCommom)){
return false;
}
}
return true;
}
function validateUncommom(uint256[] memory tsukiTokenIds) public view returns (bool) {
for (uint256 i = 0; i < tsukiTokenIds.length; i++) {
if(300>tsukiTokenIds[i] || tsukiTokenIds[i]>=(300+qtdUncommom)){
return false;
}
}
return true;
}
function validateRare(uint256[] memory tsukiTokenIds) public view returns (bool) {
for (uint256 i = 0; i < tsukiTokenIds.length; i++) {
if(400>tsukiTokenIds[i] || tsukiTokenIds[i]>=(400+qtdRare)){
return false;
}
}
return true;
}
function validateEpic(uint256[] memory tsukiTokenIds) public view returns (bool) {
for (uint256 i = 0; i < tsukiTokenIds.length; i++) {
if(500>tsukiTokenIds[i] || tsukiTokenIds[i]>=(500+qtdEpic)){
return false;
}
}
return true;
}
function getAllMomoms() public view returns (uint[] memory) {
uint[] memory momoms = new uint[](qtdCommom + qtdUncommom + qtdRare + qtdEpic + qtdLegendary);
uint256 pos = 0;
for (uint256 i = 0; i < qtdCommom; i++) {
momoms[pos] = 100+i;
pos++;
}
for (uint256 i = 0; i < qtdUncommom; i++) {
momoms[pos] = 300+i;
pos++;
}
for (uint256 i = 0; i < qtdRare; i++) {
momoms[pos] = 400+i;
pos++;
}
for (uint256 i = 0; i < qtdEpic; i++) {
momoms[pos] = 500+i;
pos++;
}
for (uint256 i = 0; i < qtdLegendary; i++) {
momoms[pos] = 600+i;
pos++;
}
return momoms;
}
function probLegerndary() public view returns (uint) {
return (upperLegendary - lowerLegendary);
}
function probEpic() public view returns (uint) {
return (upperEpic - lowerEpic);
}
function probRare() public view returns (uint) {
return (upperRare - lowerRare);
}
function probUncommom() public view returns (uint) {
return (upperUncommom - lowerUncommom);
}
function probCommom() public view returns (uint) {
return (10000 - probUncommom() - probRare() - probEpic() - probLegerndary());
}
// 1. Generate preimage off-chain and hash preimage
function hashPreimage(bytes32 _preimage) public pure returns(bytes32) {
return keccak256(abi.encodePacked(_preimage));
}
function random(bytes32 dataHash) public returns (uint) {
return generateRandom(dataHash);
/*randNonce++;
return uint(keccak256(abi.encodePacked(block.timestamp,msg.sender,randNonce)));*/
}
function randomPart(uint _random, uint _multiply) public pure returns (uint) {
uint ret = _random/_multiply;
return ret % 10000;
}
function getCard(uint number) public view returns (uint){
uint rarity = number % 10000;
if(lowerLegendary<rarity && rarity<=upperLegendary){
//legendary 0,1%
return (number%qtdLegendary)+600;
}else
if(lowerEpic<rarity && rarity<=upperEpic){
//epic 2%
return (number%qtdEpic)+500;
}else
if(lowerRare<rarity && rarity<=upperRare){
//rare 8%
return (number%qtdRare)+400;
}else
if(lowerUncommom<rarity && rarity<upperUncommom){
//uncommom 25%
return (number%qtdUncommom)+300;
}else{
//commom 64,5%
return (number%qtdCommom)+100;
}
}
function getCommom(uint number) public view returns (uint){
return (number%qtdCommom)+100;
}
function getUncommom(uint number) public view returns (uint){
return (number%qtdUncommom)+300;
}
function getRare(uint number) public view returns (uint){
return (number%qtdRare)+400;
}
function getEpic(uint number) public view returns (uint){
return (number%qtdEpic)+500;
}
function getLegendary(uint number) public view returns (uint){
return (number%qtdLegendary)+600;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC1155/ERC1155.sol
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: address zero is not a valid owner");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `ids` and `amounts` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
/**
* @dev Hook that is called after any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// File: @openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of ERC1155 that adds tracking of total supply per id.
*
* Useful for scenarios where Fungible and Non-fungible tokens have to be
* clearly identified. Note: While a totalSupply of 1 might mean the
* corresponding is an NFT, there is no guarantees that no other token with the
* same id are not going to be minted.
*/
abstract contract ERC1155Supply is ERC1155 {
mapping(uint256 => uint256) private _totalSupply;
/**
* @dev Total amount of tokens in with a given id.
*/
function totalSupply(uint256 id) public view virtual returns (uint256) {
return _totalSupply[id];
}
/**
* @dev Indicates whether any token exist with a given id, or not.
*/
function exists(uint256 id) public view virtual returns (bool) {
return ERC1155Supply.totalSupply(id) > 0;
}
/**
* @dev See {ERC1155-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual override {
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
if (from == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
_totalSupply[ids[i]] += amounts[i];
}
}
if (to == address(0)) {
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 supply = _totalSupply[id];
require(supply >= amount, "ERC1155: burn amount exceeds totalSupply");
unchecked {
_totalSupply[id] = supply - amount;
}
}
}
}
}
// File: @openzeppelin/contracts/token/ERC1155/extensions/ERC1155Burnable.sol
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/extensions/ERC1155Burnable.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC1155} that allows token holders to destroy both their
* own tokens and those that they have been approved to use.
*
* _Available since v3.1._
*/
abstract contract ERC1155Burnable is ERC1155 {
function burn(
address account,
uint256 id,
uint256 value
) public virtual {
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_burn(account, id, value);
}
function burnBatch(
address account,
uint256[] memory ids,
uint256[] memory values
) public virtual {
require(
account == _msgSender() || isApprovedForAll(account, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_burnBatch(account, ids, values);
}
}
// File: contracts/MOMOM.sol
pragma solidity ^0.8.9;
contract MOMOM is ERC1155, Ownable, Pausable, ERC1155Burnable, ERC1155Supply, Random, BurnTsuki, Variables {
//FOR PRODUCTION
uint256 public constant PUBLIC_SALES_PRICE = 0.003 ether;
uint256 public constant MAX_QTY_PER_MINT = 12;
mapping(uint256 => uint256) public tsukiClaimedMomom;
mapping(address => uint256) public preSalesMinterToTokenQty;
constructor() ERC1155("MOMOM") {}
//Set methods
function setPhaseTwoState(bool _state) public onlyOwner {
burnMomomCommomOpen = _state;
burnMomomUncommomOpen = _state;
burnMomomRareOpen = _state;
burnMomomEpicOpen = _state;
}
function setPhaseOneState(bool _state) public onlyOwner {
freeClaimOpen = _state;
burnTsuki1Open = _state;
burnTsuki2Open = _state;
burnTsuki3Open = _state;
burnTsuki4Open = _state;
burnTsuki5Open = _state;
}
function setURI(string memory newuri) public onlyOwner {
baseTokenURI = newuri;
_setURI(newuri);
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
//end of set methods
function getTokensOwnedByAddress() public view returns (uint[] memory) {
uint[] memory momoms = getAllMomoms();
uint[] memory momomsOwned = new uint[](momoms.length);
for (uint i = 0; i < momoms.length; i++) {
momomsOwned[i] = balanceOf(msg.sender,momoms[i]);
}
return momomsOwned;
}
function testGetCards(uint256 _mintQty, bytes32 dataHash) external onlyOwner returns (uint[] memory) {
uint[] memory cards = new uint[]((_mintQty)+1);
uint randNumber = random(dataHash);
for (uint i = 0; i < _mintQty; i++) {
uint number = randomPart(randNumber, ((i==0)?1:(10000**i)));
cards[i] = (number*100000)+getCard(number);
}
cards[_mintQty] = randNumber;
return cards;
}
function mint(uint256 _mintQty, bytes32 dataHash)
external
payable
returns (uint[] memory)
{
require(mintOpen,"Mint is not opened!");
require(tx.origin == msg.sender,"CONTRACTS_NOT_ALLOWED_TO_MINT");
require(_mintQty<=MAX_QTY_PER_MINT,"Max mint per mint is 10.");
require(msg.value >= _mintQty * getPrice(), "Incorrect ETH");
uint randNumber = random(dataHash);
uint bonusMintQty = bonusMint(_mintQty);
uint[] memory cards = new uint[](_mintQty+bonusMintQty);
for (uint i = 0; i < (_mintQty+ bonusMintQty); i++) {
uint number = randomPart(randNumber, ((i==0)?1:(10000**i)));
cards[i] = getCard(number);
_mint(msg.sender, cards[i], 1, "");
}
return cards;
}
function bonusMint(uint256 _mintQty) public view returns (uint) {
uint bonus = 0;
if(_mintQty>=qtyMinBonusMint1){
bonus = bonus+qtyBonusMint1;
}
if(_mintQty>=qtyMinBonusMint2){
bonus = bonus+qtyBonusMint2;
}
return bonus;
}
function claimMomon(uint256 tsukiTokenId, bytes32 dataHash)
external
returns (uint)
{
uint card;
require(freeClaimOpen,"Free Claim is not opened!");
require(tx.origin == msg.sender,"CONTRACTS_NOT_ALLOWED_TO_MINT");
require(tsukiClaimedMomom[tsukiTokenId]==0,"Tsuki already claimed momom!");
require(msg.sender == getOwner(tsukiTokenId), "Error: Not ERC721 owner");
tsukiClaimedMomom[tsukiTokenId] += 1;
uint randNumber = random(dataHash);
card = getCommom(randNumber);
_mint(msg.sender, card, 1, "");
return card;
}
function burnTsukiGetMomom(uint256[] memory tsukiTokenIds, bytes32 dataHash)
external
returns (uint)
{
uint card;
uint randNumber = random(dataHash);
bT(tsukiTokenIds);
if(tsukiTokenIds.length == 1 ){
card = getCommom(randNumber);
}else if(tsukiTokenIds.length == 2 ){
card = getUncommom(randNumber);
}else if(tsukiTokenIds.length == 3 ){
card = getRare(randNumber);
}else if(tsukiTokenIds.length == 4 ){
card = getEpic(randNumber);
}else if(tsukiTokenIds.length == 5 ){
card = getLegendary(randNumber);
}else{
require(false, "Wrong tsuki qty burn!");
}
_mint(msg.sender, card, 1, "");
return card;
}
function burn5MomomsTo1Better(uint256[] memory momomTokenIds, uint rarity, bytes32 dataHash)
external
returns (uint[] memory)
{
uint qtdMint = 0;
if(momomTokenIds.length == 5){
qtdMint = 1;
}else if(momomTokenIds.length == 10){
qtdMint = 2;
}else if(momomTokenIds.length == 15){
qtdMint = 3;
}else{
require(false, "You need 5, 10 or 15 Momoms to get 1, 2 or 3 more rare.");
}
if(rarity==3){
require(momomTokenIds.length == 5, "You can only burn 5 Epic Momoms to get 1 Legendary.");
}
uint[] memory cards = new uint[](qtdMint);
if(rarity==0){
require(burnMomomCommomOpen, "Burn Momom is not open!");
require(validateCommom(momomTokenIds), "You need 5 Commons to receive a Uncommom.");
for (uint256 i = 0; i < momomTokenIds.length; i++) {
_burn(msg.sender,momomTokenIds[i],1);
}
uint randNumber = random(dataHash);
for (uint i = 0; i < qtdMint; i++) {
uint number = randomPart(randNumber, ((i==0)?1:(10000**i)));
cards[i] = getUncommom(number);
_mint(msg.sender, cards[i], 1, "");
}
}else if(rarity==1){
require(burnMomomUncommomOpen, "Burn Momom is not open!");
require(validateUncommom(momomTokenIds), "You need 5 Uncommom to receive a Rare.");
for (uint256 i = 0; i < momomTokenIds.length; i++) {
_burn(msg.sender,momomTokenIds[i],1);
}
uint randNumber = random(dataHash);
for (uint i = 0; i < qtdMint; i++) {
uint number = randomPart(randNumber, ((i==0)?1:(10000**i)));
cards[i] = getRare(number);
_mint(msg.sender, cards[i], 1, "");
}
}else if(rarity==2){
require(burnMomomRareOpen, "Burn Momom is not open!");
require(validateRare(momomTokenIds), "You need 5 Rare to receive a Epic.");
for (uint256 i = 0; i < momomTokenIds.length; i++) {
_burn(msg.sender,momomTokenIds[i],1);
}
uint randNumber = random(dataHash);
for (uint i = 0; i < qtdMint; i++) {
uint number = randomPart(randNumber, ((i==0)?1:(10000**i)));
cards[i] = getEpic(number);
_mint(msg.sender, cards[i], 1, "");
}
}else if(rarity==3){
require(burnMomomEpicOpen, "Burn Momom is not open!");
require(validateEpic(momomTokenIds), "You need 5 Epic to receive a Legendary.");
for (uint256 i = 0; i < momomTokenIds.length; i++) {
_burn(msg.sender,momomTokenIds[i],1);
}
uint randNumber = random(dataHash);
cards[0] = getLegendary(randNumber);
_mint(msg.sender, cards[0], 1, "");
}else {
require(false, "Wrong rarity burn!");
}
return cards;
}
function rewardAllMomoms() external {
require(rewardAllMomomsOpen, "Reward all Momom is not open!");
require(qtyRewardedAllMomom < maxQtyRewardAllMomom, "Max reward reached! Wait for another reward!");
uint[] memory momoms = getAllMomoms();
for (uint256 i = 0; i < momoms.length; i++) {
_burn(msg.sender,momoms[i],1);
}
//700 is the pin for those who complete de album
_mint(msg.sender, 700, 1, "");
qtyRewardedAllMomom++;
}
function gift(address[] calldata receivers, uint256[] memory momomTokenIds) external onlyOwner {
for (uint256 i = 0; i < receivers.length; i++) {
_mint(receivers[i], momomTokenIds[i], 1, "");
}
}
function _beforeTokenTransfer(address operator, address from, address to, uint256[] memory ids, uint256[] memory amounts, bytes memory data)
internal
whenNotPaused
override(ERC1155, ERC1155Supply)
{
super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
}
//implemetation
function getPrice() public view returns (uint256) {
if(enableTsukiPrice && getBalaceOfTsuki()>0){
return custom_price_tsuki;
}
if(customPrice){
return custom_price;
}else{
return PUBLIC_SALES_PRICE;
}
}
function uri(uint256 id)
public
view
virtual
override
returns (string memory)
{
require(exists(id),
"URI query for nonexistent token"
);
return bytes(super.uri(id)).length > 0
? string(abi.encodePacked(super.uri(id), Strings.toString(id)))
: "";
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
function renounceOwnership() override public onlyOwner{
require(canRenounceOwnership,"Not the time to Renounce Ownership");
_transferOwnership(address(0));
}
}