Contract Source Code:

// File: node_modules\@openzeppelin\contracts\GSN\Context.sol

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal virtual view returns (address payable) {
    return msg.sender;
  }

  function _msgData() internal virtual view returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// File: node_modules\@openzeppelin\contracts\token\ERC20\IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender)
    external
    view
    returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: node_modules\@openzeppelin\contracts\math\SafeMath.sol

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   *
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, 'SafeMath: addition overflow');

    return c;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return sub(a, b, 'SafeMath: subtraction overflow');
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b <= a, errorMessage);
    uint256 c = a - b;

    return c;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   *
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
    if (a == 0) {
      return 0;
    }

    uint256 c = a * b;
    require(c / a == b, 'SafeMath: multiplication overflow');

    return c;
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return div(a, b, 'SafeMath: division by zero');
  }

  /**
   * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b > 0, errorMessage);
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold

    return c;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    return mod(a, b, 'SafeMath: modulo by zero');
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts with custom message when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b != 0, errorMessage);
    return a % b;
  }
}

// File: node_modules\@openzeppelin\contracts\utils\Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies in extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.

    uint256 size;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');

    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(
      success,
      'Address: unable to send value, recipient may have reverted'
    );
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain`call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data)
    internal
    returns (bytes memory)
  {
    return functionCall(target, data, 'Address: low-level call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return _functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return
      functionCallWithValue(
        target,
        data,
        value,
        'Address: low-level call with value failed'
      );
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(
      address(this).balance >= value,
      'Address: insufficient balance for call'
    );
    return _functionCallWithValue(target, data, value, errorMessage);
  }

  function _functionCallWithValue(
    address target,
    bytes memory data,
    uint256 weiValue,
    string memory errorMessage
  ) private returns (bytes memory) {
    require(isContract(target), 'Address: call to non-contract');

    // solhint-disable-next-line avoid-low-level-calls
    (bool success, bytes memory returndata) = target.call{value: weiValue}(
      data
    );
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly

        // solhint-disable-next-line no-inline-assembly
        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}

// File: @openzeppelin\contracts\token\ERC20\ERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
  using SafeMath for uint256;
  using Address for address;

  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;
  uint8 private _decimals;

  /**
   * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
   * a default value of 18.
   *
   * To select a different value for {decimals}, use {_setupDecimals}.
   *
   * All three of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name, string memory symbol) public {
    _name = name;
    _symbol = symbol;
    _decimals = 18;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5,05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
   * called.
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view returns (uint8) {
    return _decimals;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public override view returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(address account) public override view returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `recipient` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(address recipient, uint256 amount)
    public
    virtual
    override
    returns (bool)
  {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(address owner, address spender)
    public
    virtual
    override
    view
    returns (uint256)
  {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(address spender, uint256 amount)
    public
    virtual
    override
    returns (bool)
  {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20};
   *
   * Requirements:
   * - `sender` and `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   * - the caller must have allowance for ``sender``'s tokens of at least
   * `amount`.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(
      sender,
      _msgSender(),
      _allowances[sender][_msgSender()].sub(
        amount,
        'ERC20: transfer amount exceeds allowance'
      )
    );
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(address spender, uint256 addedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].add(addedValue)
    );
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].sub(
        subtractedValue,
        'ERC20: decreased allowance below zero'
      )
    );
    return true;
  }

  /**
   * @dev Moves tokens `amount` from `sender` to `recipient`.
   *
   * This is internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `sender` cannot be the zero address.
   * - `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   */
  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal virtual {
    require(sender != address(0), 'ERC20: transfer from the zero address');
    require(recipient != address(0), 'ERC20: transfer to the zero address');

    _beforeTokenTransfer(sender, recipient, amount);

    _balances[sender] = _balances[sender].sub(
      amount,
      'ERC20: transfer amount exceeds balance'
    );
    _balances[recipient] = _balances[recipient].add(amount);
    emit Transfer(sender, recipient, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements
   *
   * - `to` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: mint to the zero address');

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply = _totalSupply.add(amount);
    _balances[account] = _balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: burn from the zero address');

    _beforeTokenTransfer(account, address(0), amount);

    _balances[account] = _balances[account].sub(
      amount,
      'ERC20: burn amount exceeds balance'
    );
    _totalSupply = _totalSupply.sub(amount);
    emit Transfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), 'ERC20: approve from the zero address');
    require(spender != address(0), 'ERC20: approve to the zero address');

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Sets {decimals} to a value other than the default one of 18.
   *
   * WARNING: This function should only be called from the constructor. Most
   * applications that interact with token contracts will not expect
   * {decimals} to ever change, and may work incorrectly if it does.
   */
  function _setupDecimals(uint8 decimals_) internal {
    _decimals = decimals_;
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be to transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}

// File: contracts\StonkERC20.sol

pragma solidity >=0.6.0;

contract StonkERC20 is ERC20 {
  constructor(uint256 amount) public ERC20('STONK', 'STONK') {
    _mint(msg.sender, amount);
  }
}