Contract Name:
SorareTokens
Contract Source Code:
File 1 of 1 : SorareTokens
pragma solidity 0.6.6;
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
interface IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of NFTs in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the NFT specified by `tokenId`.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
*
*
* Requirements:
* - `from`, `to` cannot be zero.
* - `tokenId` must be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this
* NFT by either {approve} or {setApprovalForAll}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
* another (`to`).
*
* Requirements:
* - If the caller is not `from`, it must be approved to move this NFT by
* either {approve} or {setApprovalForAll}.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
function approve(address to, uint256 tokenId) external;
function getApproved(uint256 tokenId) external view returns (address operator);
function setApprovalForAll(address operator, bool _approved) external;
function isApprovedForAll(address owner, address operator) external view returns (bool);
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
interface IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
interface IERC721Enumerable is IERC721 {
function totalSupply() external view returns (uint256);
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
function tokenByIndex(uint256 index) external view returns (uint256);
}
contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
return _get(map, key, "EnumerableMap: nonexistent key");
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint256(value)));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint256(_get(map._inner, bytes32(key), errorMessage)));
}
}
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = byte(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, _msgSender()));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
abstract contract IERC721Receiver {
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a {IERC721-safeTransferFrom}. This function MUST return the function selector,
* otherwise the caller will revert the transaction. The selector to be
* returned can be obtained as `this.onERC721Received.selector`. This
* function MAY throw to revert and reject the transfer.
* Note: the ERC721 contract address is always the message sender.
* @param operator The address which called `safeTransferFrom` function
* @param from The address which previously owned the token
* @param tokenId The NFT identifier which is being transferred
* @param data Additional data with no specified format
* @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
public virtual returns (bytes4);
}
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev Gets the balance of the specified address.
* @param owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev Gets the owner of the specified token ID.
* @param tokenId uint256 ID of the token to query the owner of
* @return address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev Gets the token name.
* @return string representing the token name
*/
function name() public view override returns (string memory) {
return _name;
}
/**
* @dev Gets the token symbol.
* @return string representing the token symbol
*/
function symbol() public view override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the URI for a given token ID. May return an empty string.
*
* If a base URI is set (via {_setBaseURI}), it is added as a prefix to the
* token's own URI (via {_setTokenURI}).
*
* If there is a base URI but no token URI, the token's ID will be used as
* its URI when appending it to the base URI. This pattern for autogenerated
* token URIs can lead to large gas savings.
*
* .Examples
* |===
* |`_setBaseURI()` |`_setTokenURI()` |`tokenURI()`
* | ""
* | ""
* | ""
* | ""
* | "token.uri/123"
* | "token.uri/123"
* | "token.uri/"
* | "123"
* | "token.uri/123"
* | "token.uri/"
* | ""
* | "token.uri/<tokenId>"
* |===
*
* Requirements:
*
* - `tokenId` must exist.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
// If there is no base URI, return the token URI.
if (bytes(_baseURI).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(_baseURI, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(_baseURI, tokenId.toString()));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view returns (string memory) {
return _baseURI;
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner.
* @param owner address owning the tokens list to be accessed
* @param index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev Gets the total amount of tokens stored by the contract.
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* Reverts if the index is greater or equal to the total number of tokens.
* @param index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev Approves another address to transfer the given token ID
* The zero address indicates there is no approved address.
* There can only be one approved address per token at a given time.
* Can only be called by the token owner or an approved operator.
* @param to address to be approved for the given token ID
* @param tokenId uint256 ID of the token to be approved
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* Reverts if the token ID does not exist.
* @param tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* An operator is allowed to transfer all tokens of the sender on their behalf.
* @param operator operator address to set the approval
* @param approved representing the status of the approval to be set
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev Tells whether an operator is approved by a given owner.
* @param owner owner address which you want to query the approval of
* @param operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address.
* Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
* Requires the msg.sender to be the owner, approved, or operator.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement {IERC721Receiver-onERC721Received},
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the _msgSender() to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg.sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether the specified token exists.
* @param tokenId uint256 ID of the token to query the existence of
* @return bool whether the token exists
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether the given spender can transfer a given token ID.
* @param spender address of the spender to query
* @param tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Internal function to safely mint a new token.
* Reverts if the given token ID already exists.
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
* @param _data bytes data to send along with a safe transfer check
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Internal function to mint a new token.
* Reverts if the given token ID already exists.
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Internal function to burn a specific token.
* Reverts if the token does not exist.
* @param tokenId uint256 ID of the token being burned
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to set the token URI for a given token.
*
* Reverts if the token ID does not exist.
*
* TIP: If all token IDs share a prefix (for example, if your URIs look like
* `https://api.myproject.com/token/<id>`), use {_setBaseURI} to store
* it and save gas.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = to.call(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
));
if (!success) {
if (returndata.length > 0) {
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert("ERC721: transfer to non ERC721Receiver implementer");
}
} else {
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
}
function _approve(address to, uint256 tokenId) private {
_tokenApprovals[tokenId] = to;
emit Approval(ownerOf(tokenId), to, tokenId);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - when `from` is zero, `tokenId` will be minted for `to`.
* - when `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract MinterAccess is Ownable, AccessControl {
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
modifier onlyMinter {
require(hasRole(MINTER_ROLE, _msgSender()), "Sender is not a minter");
_;
}
constructor() public {
_setupRole(DEFAULT_ADMIN_ROLE, msg.sender);
_setupRole(MINTER_ROLE, msg.sender);
}
function addMinter(address account) external {
grantRole(MINTER_ROLE, account);
}
function renounceMinter(address account) external {
renounceRole(MINTER_ROLE, account);
}
function revokeMinter(address account) external {
revokeRole(MINTER_ROLE, account);
}
}
interface ISorareCards {
function createCard(
uint256 playerId,
uint16 season,
uint8 scarcity,
uint16 serialNumber,
bytes32 metadata,
uint16 clubId
) external returns (uint256);
function getCard(uint256 _cardId)
external
view
returns (
uint256 playerId,
uint16 season,
uint256 scarcity,
uint16 serialNumber,
bytes memory metadata,
uint16 clubId
);
function getPlayer(uint256 playerId)
external
view
returns (
string memory name,
uint16 yearOfBirth,
uint8 monthOfBirth,
uint8 dayOfBirth
);
function getClub(uint16 clubId)
external
view
returns (
string memory name,
string memory country,
string memory city,
uint16 yearFounded
);
function cardExists(uint256 cardId) external view returns (bool);
}
contract RelayRecipient is Ownable {
address private _relayAddress;
constructor(address relayAddress) public {
require(relayAddress != address(0), "Custom relay address is required");
_relayAddress = relayAddress;
}
function blockRelay() public onlyOwner {
_relayAddress = address(this);
}
function getRelayAddress() public view returns (address) {
return _relayAddress;
}
/**
* @dev Replacement for msg.sender. Returns the actual sender of a transaction: msg.sender for regular transactions,
* and the end-user for relayed calls (where msg.sender is actually `Relay` contract).
*
* IMPORTANT: Contracts derived from {GSNRecipient} should never use `msg.sender`, and use {_msgSender} instead.
*/
// prettier-ignore
function _msgSender() internal override virtual view returns (address payable) {
if (msg.sender != _relayAddress) {
return msg.sender;
} else {
return _getRelayedCallSender();
}
}
/**
* @dev Replacement for msg.data. Returns the actual calldata of a transaction: msg.data for regular transactions,
* and a reduced version for relayed calls (where msg.data contains additional information).
*
* IMPORTANT: Contracts derived from {GSNRecipient} should never use `msg.data`, and use {_msgData} instead.
*/
// prettier-ignore
function _msgData() internal override virtual view returns (bytes memory) {
if (msg.sender != _relayAddress) {
return msg.data;
} else {
return _getRelayedCallData();
}
}
function _getRelayedCallSender()
private
pure
returns (address payable result)
{
// We need to read 20 bytes (an address) located at array index msg.data.length - 20. In memory, the array
// is prefixed with a 32-byte length value, so we first add 32 to get the memory read index. However, doing
// so would leave the address in the upper 20 bytes of the 32-byte word, which is inconvenient and would
// require bit shifting. We therefore subtract 12 from the read index so the address lands on the lower 20
// bytes. This can always be done due to the 32-byte prefix.
// The final memory read index is msg.data.length - 20 + 32 - 12 = msg.data.length. Using inline assembly is the
// easiest/most-efficient way to perform this operation.
// These fields are not accessible from assembly
bytes memory array = msg.data;
uint256 index = msg.data.length;
// solhint-disable-next-line no-inline-assembly
assembly {
// Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
result := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
return result;
}
function _getRelayedCallData() private pure returns (bytes memory) {
// RelayHub appends the sender address at the end of the calldata, so in order to retrieve the actual msg.data,
// we must strip the last 20 bytes (length of an address type) from it.
uint256 actualDataLength = msg.data.length - 20;
bytes memory actualData = new bytes(actualDataLength);
for (uint256 i = 0; i < actualDataLength; ++i) {
actualData[i] = msg.data[i];
}
return actualData;
}
}
library NFTClient {
bytes4 public constant interfaceIdERC721 = 0x80ac58cd;
function requireERC721(address _candidate) public view {
require(
IERC721Enumerable(_candidate).supportsInterface(interfaceIdERC721),
"IS_NOT_721_TOKEN"
);
}
function transferTokens(
IERC721Enumerable _nftContract,
address _from,
address _to,
uint256[] memory _tokenIds
) public {
for (uint256 index = 0; index < _tokenIds.length; index++) {
if (_tokenIds[index] == 0) {
break;
}
_nftContract.safeTransferFrom(_from, _to, _tokenIds[index]);
}
}
function transferAll(
IERC721Enumerable _nftContract,
address _sender,
address _receiver
) public {
uint256 balance = _nftContract.balanceOf(_sender);
while (balance > 0) {
_nftContract.safeTransferFrom(
_sender,
_receiver,
_nftContract.tokenOfOwnerByIndex(_sender, balance - 1)
);
balance--;
}
}
// /// @dev Pagination of owner tokens
// /// @param owner - address of the token owner
// /// @param page - page number
// /// @param rows - number of rows per page
function tokensOfOwner(
address _nftContract,
address owner,
uint8 page,
uint8 rows
) public view returns (uint256[] memory) {
requireERC721(_nftContract);
IERC721Enumerable nftContract = IERC721Enumerable(_nftContract);
uint256 tokenCount = nftContract.balanceOf(owner);
uint256 offset = page * rows;
uint256 range = offset > tokenCount
? 0
: min(tokenCount - offset, rows);
uint256[] memory tokens = new uint256[](range);
for (uint256 index = 0; index < range; index++) {
tokens[index] = nftContract.tokenOfOwnerByIndex(
owner,
offset + index
);
}
return tokens;
}
function min(uint256 a, uint256 b) private pure returns (uint256) {
return a > b ? b : a;
}
}
interface ISorareTokens {
function createCardAndMintToken(
uint256 playerId,
uint16 season,
uint8 scarcity,
uint16 serialNumber,
bytes32 metadata,
uint16 clubId,
address to
) external returns (uint256);
function mintToken(uint256 cardId, address to) external returns (uint256);
}
interface INextContract {
function migrateTokens(uint256[] calldata tokenIds, address to) external;
}
contract SorareTokens is
MinterAccess,
RelayRecipient,
ERC721("Sorare", "SOR"),
ISorareTokens
{
ISorareCards public sorareCards;
INextContract public nextContract;
constructor(address sorareCardsAddress, address relayAddress)
public
RelayRecipient(relayAddress)
{
require(
sorareCardsAddress != address(0),
"SorareCards address is required"
);
sorareCards = ISorareCards(sorareCardsAddress);
}
/// @dev Set the prefix for the tokenURIs.
function setTokenURIPrefix(string memory prefix) public onlyOwner {
_setBaseURI(prefix);
}
/// @dev Set the potential next version contract
function setNextContract(address nextContractAddress) public onlyOwner {
require(
address(nextContract) == address(0),
"NextContract already set"
);
nextContract = INextContract(nextContractAddress);
}
/// @dev Creates a new card in the Cards contract and mints the token
// prettier-ignore
function createCardAndMintToken(
uint256 playerId,
uint16 season,
uint8 scarcity,
uint16 serialNumber,
bytes32 metadata,
uint16 clubId,
address to
) public onlyMinter override returns (uint256) {
uint256 cardId = sorareCards.createCard(
playerId,
season,
scarcity,
serialNumber,
metadata,
clubId
);
_mint(to, cardId);
return cardId;
}
/// @dev Mints a token for an existing card
// prettier-ignore
function mintToken(uint256 cardId, address to)
public
override
onlyMinter
returns (uint256)
{
require(sorareCards.cardExists(cardId), "Card does not exist");
_mint(to, cardId);
return cardId;
}
/// @dev Migrates tokens to a potential new version of this contract
/// @param tokenIds - list of tokens to transfer
function migrateTokens(uint256[] calldata tokenIds) external {
require(address(nextContract) != address(0), "Next contract not set");
for (uint256 index = 0; index < tokenIds.length; index++) {
transferFrom(_msgSender(), address(this), tokenIds[index]);
}
nextContract.migrateTokens(tokenIds, _msgSender());
}
/// @dev Pagination of owner tokens
/// @param owner - address of the token owner
/// @param page - page number
/// @param rows - number of rows per page
function tokensOfOwner(address owner, uint8 page, uint8 rows)
public
view
returns (uint256[] memory)
{
return NFTClient.tokensOfOwner(address(this), owner, page, rows);
}
function getCard(uint256 tokenId)
public
view
returns (
uint256 playerId,
uint16 season,
uint256 scarcity,
uint16 serialNumber,
bytes memory metadata,
uint16 clubId
)
{
(
playerId,
season,
scarcity,
serialNumber,
metadata,
clubId
) = sorareCards.getCard(tokenId);
}
function getPlayer(uint256 playerId)
external
view
returns (
string memory name,
uint16 yearOfBirth,
uint8 monthOfBirth,
uint8 dayOfBirth
)
{
(name, yearOfBirth, monthOfBirth, dayOfBirth) = sorareCards.getPlayer(
playerId
);
}
// prettier-ignore
function getClub(uint16 clubId)
external
view
returns (
string memory name,
string memory country,
string memory city,
uint16 yearFounded
)
{
(name, country, city, yearFounded) = sorareCards.getClub(clubId);
}
// prettier-ignore
function _msgSender() internal view override(RelayRecipient, Context) returns (address payable) {
return RelayRecipient._msgSender();
}
// prettier-ignore
function _msgData() internal view override(RelayRecipient, Context) returns (bytes memory) {
return RelayRecipient._msgData();
}
}