Contract Name:
GmStudioPlasticity
Contract Source Code:
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
/**
@title SignatureChecker
@notice Additional functions for EnumerableSet.Addresset that require a valid
ECDSA signature of a standardized message, signed by any member of the set.
*/
library SignatureChecker {
using EnumerableSet for EnumerableSet.AddressSet;
/**
@notice Requires that the message has not been used previously and that the
recovered signer is contained in the signers AddressSet.
@dev Convenience wrapper for message generation + signature verification
+ marking message as used
@param signers Set of addresses from which signatures are accepted.
@param usedMessages Set of already-used messages.
@param signature ECDSA signature of message.
*/
function requireValidSignature(
EnumerableSet.AddressSet storage signers,
bytes memory data,
bytes calldata signature,
mapping(bytes32 => bool) storage usedMessages
) internal {
bytes32 message = generateMessage(data);
require(
!usedMessages[message],
"SignatureChecker: Message already used"
);
usedMessages[message] = true;
requireValidSignature(signers, message, signature);
}
/**
@notice Requires that the message has not been used previously and that the
recovered signer is contained in the signers AddressSet.
@dev Convenience wrapper for message generation + signature verification.
*/
function requireValidSignature(
EnumerableSet.AddressSet storage signers,
bytes memory data,
bytes calldata signature
) internal view {
bytes32 message = generateMessage(data);
requireValidSignature(signers, message, signature);
}
/**
@notice Requires that the message has not been used previously and that the
recovered signer is contained in the signers AddressSet.
@dev Convenience wrapper for message generation from address +
signature verification.
*/
function requireValidSignature(
EnumerableSet.AddressSet storage signers,
address a,
bytes calldata signature
) internal view {
bytes32 message = generateMessage(abi.encodePacked(a));
requireValidSignature(signers, message, signature);
}
/**
@notice Common validator logic, checking if the recovered signer is
contained in the signers AddressSet.
*/
function validSignature(
EnumerableSet.AddressSet storage signers,
bytes32 message,
bytes calldata signature
) internal view returns (bool) {
return signers.contains(ECDSA.recover(message, signature));
}
/**
@notice Requires that the recovered signer is contained in the signers
AddressSet.
@dev Convenience wrapper that reverts if the signature validation fails.
*/
function requireValidSignature(
EnumerableSet.AddressSet storage signers,
bytes32 message,
bytes calldata signature
) internal view {
require(
validSignature(signers, message, signature),
"SignatureChecker: Invalid signature"
);
}
/**
@notice Generates a message for a given data input that will be signed
off-chain using ECDSA.
@dev For multiple data fields, a standard concatenation using
`abi.encodePacked` is commonly used to build data.
*/
function generateMessage(bytes memory data)
internal
pure
returns (bytes32)
{
return ECDSA.toEthSignedMessageHash(data);
}
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
import "../thirdparty/opensea/OpenSeaGasFreeListing.sol";
import "../utils/OwnerPausable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Pausable.sol";
import "@openzeppelin/contracts/utils/Context.sol";
/**
@notice An ERC721 contract with common functionality:
- OpenSea gas-free listings
- OpenZeppelin Pausable
- OpenZeppelin Pausable with functions exposed to Owner only
*/
contract ERC721Common is Context, ERC721Pausable, OwnerPausable {
constructor(string memory name, string memory symbol)
ERC721(name, symbol)
{}
/// @notice Requires that the token exists.
modifier tokenExists(uint256 tokenId) {
require(ERC721._exists(tokenId), "ERC721Common: Token doesn't exist");
_;
}
/// @notice Requires that msg.sender owns or is approved for the token.
modifier onlyApprovedOrOwner(uint256 tokenId) {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721Common: Not approved nor owner"
);
_;
}
/// @notice Overrides _beforeTokenTransfer as required by inheritance.
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/// @notice Overrides supportsInterface as required by inheritance.
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
/**
@notice Returns true if either standard isApprovedForAll() returns true or
the operator is the OpenSea proxy for the owner.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return
super.isApprovedForAll(owner, operator) ||
OpenSeaGasFreeListing.isApprovedForAll(owner, operator);
}
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
interface IPaymentSplitterFactory {
/// @notice Deploys a minimal contract proxy to a PaymentSplitter.
function deploy(address[] memory payees, uint256[] memory shares)
external
returns (address);
/**
@notice Deploys a minimal contract proxy to a PaymentSplitter, at a
deterministic address.
@dev Use predictDeploymentAddress() with the same salt to predit the address
before calling deployDeterministic(). See OpenZeppelin's proxy/Clones.sol
for details and caveats, primarily that this will revert if a salt is
reused.
*/
function deployDeterministic(
bytes32 salt,
address[] memory payees,
uint256[] memory shares
) external returns (address);
/**
@notice Returns the address at which a new PaymentSplitter will be deployed
if using the same salt as passed to this function.
*/
function predictDeploymentAddress(bytes32 salt)
external
view
returns (address);
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
import "./IPaymentSplitterFactory.sol";
/**
@notice Convenience library for using ethier's PaymentSplitterFactory for cheap
deployment of OpenZeppelin PaymentSplitters via minimal proxy contracts. A
single factory contract is deployed on supported chains, the respective
addresses of which are determined via the chainid() and returned by this
library's instance() function.
*/
library PaymentSplitterDeployer {
/***
@notice Returns the ethier PaymentSplitterFactory instance for the current
chain.
*/
function instance() internal view returns (IPaymentSplitterFactory) {
address factory;
assembly {
switch chainid()
case 1 {
// mainnet
factory := 0xf034d6a4b1a64f0e6038632d87746ca24b79d325
}
case 4 {
// Rinkeby
factory := 0x633dc916D9f59cf4aA117dE2Bb8edF7752270EC0
}
case 1337 {
// The geth SimulatedBackend iff used with the ethier
// factorytest package.
factory := 0xa516d2c64ED7Fe2004A93Bc123854B229F3Bb738
}
}
require(
factory != address(0),
"PaymentSplitterFactory: not deployed on current chain"
);
return IPaymentSplitterFactory(factory);
}
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
// Inspired by BaseOpenSea by Simon Fremaux (@dievardump) but without the need
// to pass specific addresses depending on deployment network.
// https://gist.github.com/dievardump/483eb43bc6ed30b14f01e01842e3339b/
import "./ProxyRegistry.sol";
/// @notice Library to achieve gas-free listings on OpenSea.
library OpenSeaGasFreeListing {
/**
@notice Returns whether the operator is an OpenSea proxy for the owner, thus
allowing it to list without the token owner paying gas.
@dev ERC{721,1155}.isApprovedForAll should be overriden to also check if
this function returns true.
*/
function isApprovedForAll(address owner, address operator)
internal
view
returns (bool)
{
address proxy = proxyFor(owner);
return proxy != address(0) && proxy == operator;
}
/**
@notice Returns the OpenSea proxy address for the owner.
*/
function proxyFor(address owner) internal view returns (address) {
address registry;
uint256 chainId;
assembly {
chainId := chainid()
switch chainId
// Production networks are placed higher to minimise the number of
// checks performed and therefore reduce gas. By the same rationale,
// mainnet comes before Polygon as it's more expensive.
case 1 {
// mainnet
registry := 0xa5409ec958c83c3f309868babaca7c86dcb077c1
}
case 137 {
// polygon
registry := 0x58807baD0B376efc12F5AD86aAc70E78ed67deaE
}
case 4 {
// rinkeby
registry := 0xf57b2c51ded3a29e6891aba85459d600256cf317
}
case 80001 {
// mumbai
registry := 0xff7Ca10aF37178BdD056628eF42fD7F799fAc77c
}
case 1337 {
// The geth SimulatedBackend iff used with the ethier
// openseatest package. This is mocked as a Wyvern proxy as it's
// more complex than the 0x ones.
registry := 0xE1a2bbc877b29ADBC56D2659DBcb0ae14ee62071
}
}
// Unlike Wyvern, the registry itself is the proxy for all owners on 0x
// chains.
if (registry == address(0) || chainId == 137 || chainId == 80001) {
return registry;
}
return address(ProxyRegistry(registry).proxies(owner));
}
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
/// @notice A minimal interface describing OpenSea's Wyvern proxy registry.
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
/**
@dev This pattern of using an empty contract is cargo-culted directly from
OpenSea's example code. TODO: it's likely that the above mapping can be changed
to address => address without affecting anything, but further investigation is
needed (i.e. is there a subtle reason that OpenSea released it like this?).
*/
contract OwnableDelegateProxy {
}
// SPDX-License-Identifier: MIT
// Copyright (c) 2021 the ethier authors (github.com/divergencetech/ethier)
pragma solidity >=0.8.0 <0.9.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
/// @notice A Pausable contract that can only be toggled by the Owner.
contract OwnerPausable is Ownable, Pausable {
/// @notice Pauses the contract.
function pause() public onlyOwner {
Pausable._pause();
}
/// @notice Unpauses the contract.
function unpause() public onlyOwner {
Pausable._unpause();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/extensions/ERC721Pausable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../security/Pausable.sol";
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: UNLICENSED
// Copyright (c) 2022 gmDAO
pragma solidity >=0.8.0 <0.9.0;
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@divergencetech/ethier/contracts/erc721/ERC721Common.sol";
import "@divergencetech/ethier/contracts/crypto/SignatureChecker.sol";
import "@divergencetech/ethier/contracts/factories/PaymentSplitterDeployer.sol";
import "../../utils/ERC2981SinglePercentual.sol";
// __ __ __
// | \ | \ \
// ______ ______ ____ _______ _| ▓▓_ __ __ ____| ▓▓\▓▓ ______
// / \| \ \ / \ ▓▓ \ | \ | \/ ▓▓ \/ \
// | ▓▓▓▓▓▓\ ▓▓▓▓▓▓\▓▓▓▓\ | ▓▓▓▓▓▓▓\▓▓▓▓▓▓ | ▓▓ | ▓▓ ▓▓▓▓▓▓▓ ▓▓ ▓▓▓▓▓▓\
// | ▓▓ | ▓▓ ▓▓ | ▓▓ | ▓▓ \▓▓ \ | ▓▓ __| ▓▓ | ▓▓ ▓▓ | ▓▓ ▓▓ ▓▓ | ▓▓
// | ▓▓__| ▓▓ ▓▓ | ▓▓ | ▓▓__ _\▓▓▓▓▓▓\ | ▓▓| \ ▓▓__/ ▓▓ ▓▓__| ▓▓ ▓▓ ▓▓__/ ▓▓
// \▓▓ ▓▓ ▓▓ | ▓▓ | ▓▓ \ | ▓▓ \▓▓ ▓▓\▓▓ ▓▓\▓▓ ▓▓ ▓▓\▓▓ ▓▓
// _\▓▓▓▓▓▓▓\▓▓ \▓▓ \▓▓\▓▓ \▓▓▓▓▓▓▓ \▓▓▓▓ \▓▓▓▓▓▓ \▓▓▓▓▓▓▓\▓▓ \▓▓▓▓▓▓
// | \__| ▓▓
// \▓▓ ▓▓
// \▓▓▓▓▓▓
//
contract GmStudioPlasticity is
ERC721Common,
ReentrancyGuard,
ERC2981SinglePercentual
{
using EnumerableSet for EnumerableSet.AddressSet;
using SignatureChecker for EnumerableSet.AddressSet;
using Address for address payable;
/// @notice Price for minting
uint256 public constant MINT_PRICE = 0.15 ether;
/// @notice Splits payments between the Studio and the artist.
address payable public immutable paymentSplitter;
/// @notice Splits payments between the Studio and the artist.
address payable public immutable paymentSplitterRoyalties;
/// @notice Total maximum amount of tokens
uint32 public constant MAX_NUM_TOKENS = 555;
/// @notice Max number of mints per transaction.
/// @dev Only for public mints.
uint32 public constant MAX_MINT_PER_TX = 1;
/// @notice True if desired to prevent Flashbots from executing more than
/// one transaction per block
bool internal constant FLASHBOTS_PROTECTION = true;
/// @notice Number of mints throught the signed minting interface.
uint32 internal constant NUM_SIGNED_MINTS = 555;
/// @notice Number of mints for reserved the studio.
uint32 internal constant NUM_RESERVED_MINTS = 1;
/// @notice Currently minted supply of tokens
uint32 public totalSupply;
/// @notice Counter for the remaining signed mints
uint32 internal numSignedMintsRemaining;
/// @notice Locks the mintReserve function
bool internal reserveMinted;
/// @notice Timestamps to enables/eisables minting interfaces
/// @dev The following order is assumed
/// signedMintOpeningTimestamp < publicMintOpeningTimestamp < mintClosingTimestamp
struct MintConfig {
uint64 signedMintOpeningTimestamp;
uint64 publicMintOpeningTimestamp;
uint64 mintClosingTimestamp;
}
/// @notice The minting configuration
MintConfig public mintConfig;
/// @notice Stores the number of tokens minted from a signature
/// @dev Used in mintSigned
mapping(bytes32 => uint256) public numSignedMintsFrom;
/// @notice Signature signers for the early access phase.
/// @dev Removing signers invalidates the corresponding signatures.
EnumerableSet.AddressSet private _signers;
/// @notice tokenURI() base path.
/// @dev Without trailing slash
string internal _baseTokenURI;
/// @notice Keeps track when a given sender made the last tx.
/// @dev This is used and incremented by the `onlyOncePerBlock` modifier.
mapping(address => uint256) private _lastTxBlockBy;
/// @notice Token seeds for the artwork generation code determined at mint.
/// @dev Determined by `_computeSeed`.
mapping(uint256 => bytes32) private _seeds;
constructor(
address newOwner,
address signer,
string memory baseTokenURI,
address[] memory payees,
uint256[] memory shares,
uint256[] memory sharesRoyalties
) ERC721Common("Plasticity by p4stoboy", "PLAST") {
_signers.add(signer);
_baseTokenURI = baseTokenURI;
paymentSplitter = payable(
PaymentSplitterDeployer.instance().deploy(payees, shares)
);
paymentSplitterRoyalties = payable(
PaymentSplitterDeployer.instance().deploy(payees, sharesRoyalties)
);
_setRoyaltyPercentage(750);
_setRoyaltyReceiver(paymentSplitterRoyalties);
numSignedMintsRemaining = NUM_SIGNED_MINTS;
transferOwnership(newOwner);
}
// -------------------------------------------------------------------------
//
// Minting
//
// -------------------------------------------------------------------------
/// @notice Toggle minting relevant flags.
function setMintConfig(MintConfig calldata config) external onlyOwner {
mintConfig = config;
}
/* solhint-disable not-rely-on-time */
/// @dev Reverts if we are not in the signed minting window or the if
/// `mintConfig` has not been set yet.
modifier onlyDuringSignedMintingPeriod() {
if (
// solhint-disable-next-line not-rely-on-time
block.timestamp < mintConfig.signedMintOpeningTimestamp ||
block.timestamp > mintConfig.publicMintOpeningTimestamp
) revert MintDisabled();
_;
}
/// @dev Reverts if we are not in the public minting window or the if
/// `mintConfig` has not been set yet.
modifier onlyDuringPublicMintingPeriod() {
if (
block.timestamp < mintConfig.publicMintOpeningTimestamp ||
block.timestamp > mintConfig.mintClosingTimestamp
) revert MintDisabled();
_;
}
/* solhint-enable not-rely-on-time */
/// @dev Reverts if called more than once per block. Only applies to
/// contracts.
modifier onlyOncePerBlock() {
/* solhint-disable-next-line avoid-tx-origin */
if (FLASHBOTS_PROTECTION || tx.origin != msg.sender) {
if (block.number <= _lastTxBlockBy[msg.sender])
revert OnlyOneTxPerBlock();
_lastTxBlockBy[msg.sender] = block.number;
}
_;
}
/// @notice Mints tokens to a given address using a signed message.
/// @dev The minter might be different than the receiver.
/// @param to Token receiver
/// @param num Number of tokens to be minted.
/// @param numMax Max number of tokens that can be minted to the receiver
/// @param signature to prove that the receiver is allowed to get mints.
/// @dev The signed messages is generated from `to || numMax`.
function mintSigned(
address to,
uint16 num,
uint16 numMax,
uint16 nonce,
bytes calldata signature
) external payable nonReentrant onlyDuringSignedMintingPeriod {
bytes32 message = ECDSA.toEthSignedMessageHash(
abi.encodePacked(to, numMax, nonce)
);
if (num + numSignedMintsFrom[message] > numMax)
revert TooManyMintsRequested();
if (num > numSignedMintsRemaining)
revert InsufficientTokensRemanining();
if (num * MINT_PRICE != msg.value) revert InvalidPayment();
_signers.requireValidSignature(message, signature);
numSignedMintsFrom[message] += num;
numSignedMintsRemaining -= num;
_processPayment();
_processMint(to, num);
}
/// @notice Mints tokens to the sender.
/// @dev The minter might be different than the receiver.
/// @param num Number of tokens to be minted.
function mintPublic(uint32 num)
external
payable
onlyDuringPublicMintingPeriod
onlyOncePerBlock
{
if (num > MAX_MINT_PER_TX) revert TooManyMintsRequested();
uint256 numRemaining = MAX_NUM_TOKENS - totalSupply;
if (num > numRemaining) revert InsufficientTokensRemanining();
if (num * MINT_PRICE != msg.value) revert InvalidPayment();
_processPayment();
_processMint(msg.sender, num);
}
/// @notice Receiver of reserve mints.
/// @dev `to` corresponds to the address of the receiver and `num` to the
/// number of tokens to be minted.
struct ReserveReceiver {
address to;
uint32 num;
}
/// @notice Mints the initial token reserve.
/// @param receivers Array of token receivers
/// @dev The minter might be different than the receiver.
/// @dev Reverts if the number of minted tokens does not equal
/// NUM_RESERVED_MINTS
function mintReserve(ReserveReceiver[] calldata receivers)
external
onlyOwner
{
if (reserveMinted) revert MintDisabled();
reserveMinted = true;
uint256 numReceivers = receivers.length;
uint256 minted = 0;
for (uint256 idx = 0; idx < numReceivers; ++idx) {
minted += receivers[idx].num;
_processMint(receivers[idx].to, receivers[idx].num);
}
if (minted != NUM_RESERVED_MINTS) revert WrongNumberOfReserveMints();
}
/// @notice Mints new tokens for the recipient.
function _processMint(address to, uint32 num) internal {
uint32 nextTokenId = totalSupply;
for (uint256 i = 0; i < num; i++) {
if (MAX_NUM_TOKENS <= nextTokenId) revert SoldOut();
ERC721._safeMint(to, nextTokenId);
_seeds[nextTokenId] = _computeSeed(to, nextTokenId);
nextTokenId++;
}
totalSupply = nextTokenId;
}
/// @notice Computes a pseudorandom seed for a given token.
/// @dev Even though this process can be gamed in principle, it is extremly
/// difficult to do so in practise. Therefore we can still rely on this to
/// derive fair seeds.
function _computeSeed(address to, uint32 tokenId)
internal
view
returns (bytes32)
{
return
keccak256(
abi.encodePacked(
address(this),
block.difficulty,
blockhash(block.number - 1),
to,
tokenId
)
);
}
// -------------------------------------------------------------------------
//
// Signature validataion
//
// -------------------------------------------------------------------------
/// @notice Removes and adds addresses to the set of allowed signers.
/// @dev Removal is performed before addition.
function changeSigners(
address[] calldata delSigners,
address[] calldata addSigners
) external onlyOwner {
for (uint256 idx; idx < delSigners.length; ++idx) {
_signers.remove(delSigners[idx]);
}
for (uint256 idx; idx < addSigners.length; ++idx) {
_signers.add(addSigners[idx]);
}
}
/// @notice Returns the addresses that are used for signature verification
function getSigners() external view returns (address[] memory signers) {
uint256 len = _signers.length();
signers = new address[](len);
for (uint256 idx = 0; idx < len; ++idx) {
signers[idx] = _signers.at(idx);
}
}
// -------------------------------------------------------------------------
//
// Payment
//
// -------------------------------------------------------------------------
/// @notice Processes an incoming payment and sends it to the payment
/// splitter.
function _processPayment() internal {
paymentSplitter.sendValue(msg.value);
}
// -------------------------------------------------------------------------
//
// Metadata
//
// -------------------------------------------------------------------------
/// @notice Change tokenURI() base path.
/// @param uri The new base path (must not contain trailing slash)
function setBaseTokenURI(string calldata uri) external onlyOwner {
_baseTokenURI = uri;
}
/// @notice Returns the URI for token metadata.
function tokenURI(uint256 tokenId)
public
view
override
tokenExists(tokenId)
returns (string memory)
{
return
string(
abi.encodePacked(
_baseTokenURI,
"/",
Strings.toString(tokenId),
".json"
)
);
}
/// @notice Returns the seed of a token.
function tokenSeed(uint256 tokenId)
public
view
tokenExists(tokenId)
returns (bytes32)
{
return _seeds[tokenId];
}
// -------------------------------------------------------------------------
//
// Internals
//
// -------------------------------------------------------------------------
/// @dev See {IERC165-supportsInterface}.
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721Common, ERC2981)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
// -------------------------------------------------------------------------
//
// Errors
//
// -------------------------------------------------------------------------
error MintDisabled();
error TooManyMintsRequested();
error InsufficientTokensRemanining();
error InvalidPayment();
error SoldOut();
error OnlyOneTxPerBlock();
error WrongNumberOfReserveMints();
}
// SPDX-License-Identifier: MIT
// Copyright 2021 David Huber (@cxkoda)
pragma solidity >=0.8.0 <0.9.0;
import "./IERC2981.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
/**
* @notice ERC2981 royalty info base contract
* @dev Implements `supportsInterface`
*/
abstract contract ERC2981 is IERC2981, ERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC2981).interfaceId ||
super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// Copyright 2021 David Huber (@cxkoda)
pragma solidity >=0.8.0 <0.9.0;
import "./ERC2981.sol";
/**
* @notice ERC2981 royalty info implementation for a single beneficiary
* receving a percentage of sales prices.
* @author David Huber (@cxkoda)
*/
contract ERC2981SinglePercentual is ERC2981 {
/**
* @dev The royalty percentage (in units of 0.01%)
*/
uint96 private _percentage;
/**
* @dev The address to receive the royalties
*/
address private _receiver;
/**
* @dev See {IERC2981-royaltyInfo}.
*/
function royaltyInfo(uint256, uint256 salePrice)
external
view
override
returns (address receiver, uint256 royaltyAmount)
{
royaltyAmount = (salePrice / 10000) * _percentage;
receiver = _receiver;
}
/**
* @dev Sets the royalty percentage (in units of 0.01%)
*/
function _setRoyaltyPercentage(uint96 percentage_) internal {
_percentage = percentage_;
}
/**
* @dev Sets the address to receive the royalties
*/
function _setRoyaltyReceiver(address receiver_) internal {
_receiver = receiver_;
}
}
// SPDX-License-Identifier: None
pragma solidity >=0.8.0 <0.9.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard
* @author Taken from https://eips.ethereum.org/EIPS/eip-2981
*/
interface IERC2981 is IERC165 {
/**
* @notice Called with the sale price to determine how much royalty
* is owed and to whom.
* @param tokenId - the NFT asset queried for royalty information
* @param salePrice - the sale price of the NFT asset specified by _tokenId
* @return receiver - address of who should be sent the royalty payment
* @return royaltyAmount - the royalty payment amount for _salePrice
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}