Contract Name:
LofiOriginals3D
Contract Source Code:
File 1 of 1 : LofiOriginals3D
// SPDX-License-Identifier: MIT
// File: lo3d/IOperatorFilterRegistry.sol
pragma solidity ^0.8.13;
interface IOperatorFilterRegistry {
function isOperatorAllowed(address registrant, address operator) external view returns (bool);
function register(address registrant) external;
function registerAndSubscribe(address registrant, address subscription) external;
function registerAndCopyEntries(address registrant, address registrantToCopy) external;
function unregister(address addr) external;
function updateOperator(address registrant, address operator, bool filtered) external;
function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
function subscribe(address registrant, address registrantToSubscribe) external;
function unsubscribe(address registrant, bool copyExistingEntries) external;
function subscriptionOf(address addr) external returns (address registrant);
function subscribers(address registrant) external returns (address[] memory);
function subscriberAt(address registrant, uint256 index) external returns (address);
function copyEntriesOf(address registrant, address registrantToCopy) external;
function isOperatorFiltered(address registrant, address operator) external returns (bool);
function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
function filteredOperators(address addr) external returns (address[] memory);
function filteredCodeHashes(address addr) external returns (bytes32[] memory);
function filteredOperatorAt(address registrant, uint256 index) external returns (address);
function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
function isRegistered(address addr) external returns (bool);
function codeHashOf(address addr) external returns (bytes32);
}
// File: lo3d/OperatorFilterer.sol
pragma solidity ^0.8.13;
/**
* @title OperatorFilterer
* @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
* registrant's entries in the OperatorFilterRegistry.
* @dev This smart contract is meant to be inherited by token contracts so they can use the following:
* - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
* - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
*/
abstract contract OperatorFilterer {
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (subscribe) {
OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
} else {
OPERATOR_FILTER_REGISTRY.register(address(this));
}
}
}
}
modifier onlyAllowedOperator(address from) virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
// Allow spending tokens from addresses with balance
// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
// from an EOA.
if (from == msg.sender) {
_;
return;
}
if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), msg.sender)) {
revert OperatorNotAllowed(msg.sender);
}
}
_;
}
modifier onlyAllowedOperatorApproval(address operator) virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {
revert OperatorNotAllowed(operator);
}
}
_;
}
}
// File: lo3d/DefaultOperatorFilterer.sol
pragma solidity ^0.8.13;
/**
* @title DefaultOperatorFilterer
* @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.
*/
abstract contract DefaultOperatorFilterer is OperatorFilterer {
address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);
constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}
// File: lo3d/LofiOriginals3D.sol
pragma solidity ^0.8.13;
// File: contracts/Ownable.sol
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*
* Source: openzeppelin
*/
abstract contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(msg.sender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == msg.sender, "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() external virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) external virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: Strings.sol
/**
* Source: Openzeppelin
*/
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
}
// File: Address.sol
/**
* Source: Openzeppelin
*/
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
}
// File: IERC721Receiver.sol
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: IERC165.sol
// https://eips.ethereum.org/EIPS/eip-165
interface IERC165 {
/// @notice Query if a contract implements an interface
/// @param interfaceID The interface identifier, as specified in ERC-165
/// @dev Interface identification is specified in ERC-165. This function
/// uses less than 30,000 gas.
/// @return `true` if the contract implements `interfaceID` and
/// `interfaceID` is not 0xffffffff, `false` otherwise
function supportsInterface(bytes4 interfaceID) external view returns (bool);
}
// File: IERC2981.sol
/**
* Source: Openzeppelin
*/
/**
* @dev Interface for the NFT Royalty Standard
*/
interface IERC2981 is IERC165 {
/**
* @dev Called with the sale price to determine how much royalty is owed and to whom.
* @param tokenId - the NFT asset queried for royalty information
* @param salePrice - the sale price of the NFT asset specified by `tokenId`
* @return receiver - address of who should be sent the royalty payment
* @return royaltyAmount - the royalty payment amount for `salePrice`
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// File: ERC165.sol
/**
* Source: Openzeppelin
*/
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: IERC721.sol
// https://eips.ethereum.org/EIPS/eip-721, http://erc721.org/
/// @title ERC-721 Non-Fungible Token Standard
/// @dev See https://eips.ethereum.org/EIPS/eip-721
/// Note: the ERC-165 identifier for this interface is 0x80ac58cd.
interface IERC721 is IERC165 {
/// @dev This emits when ownership of any NFT changes by any mechanism.
/// This event emits when NFTs are created (`from` == 0) and destroyed
/// (`to` == 0). Exception: during contract creation, any number of NFTs
/// may be created and assigned without emitting Transfer. At the time of
/// any transfer, the approved address for that NFT (if any) is reset to none.
event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);
/// @dev This emits when the approved address for an NFT is changed or
/// reaffirmed. The zero address indicates there is no approved address.
/// When a Transfer event emits, this also indicates that the approved
/// address for that NFT (if any) is reset to none.
event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);
/// @dev This emits when an operator is enabled or disabled for an owner.
/// The operator can manage all NFTs of the owner.
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
/// @notice Count all NFTs assigned to an owner
/// @dev NFTs assigned to the zero address are considered invalid, and this
/// function throws for queries about the zero address.
/// @param _owner An address for whom to query the balance
/// @return The number of NFTs owned by `_owner`, possibly zero
function balanceOf(address _owner) external view returns (uint256);
/// @notice Find the owner of an NFT
/// @dev NFTs assigned to zero address are considered invalid, and queries
/// about them do throw.
/// @param _tokenId The identifier for an NFT
/// @return The address of the owner of the NFT
function ownerOf(uint256 _tokenId) external view returns (address);
/// @notice Transfers the ownership of an NFT from one address to another address
/// @dev Throws unless `msg.sender` is the current owner, an authorized
/// operator, or the approved address for this NFT. Throws if `_from` is
/// not the current owner. Throws if `_to` is the zero address. Throws if
/// `_tokenId` is not a valid NFT. When transfer is complete, this function
/// checks if `_to` is a smart contract (code size > 0). If so, it calls
/// `onERC721Received` on `_to` and throws if the return value is not
/// `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
/// @param data Additional data with no specified format, sent in call to `_to`
function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes memory data) external;
/// @notice Transfers the ownership of an NFT from one address to another address
/// @dev This works identically to the other function with an extra data parameter,
/// except this function just sets data to "".
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
function safeTransferFrom(address _from, address _to, uint256 _tokenId) external;
/// @notice Transfer ownership of an NFT -- THE CALLER IS RESPONSIBLE
/// TO CONFIRM THAT `_to` IS CAPABLE OF RECEIVING NFTS OR ELSE
/// THEY MAY BE PERMANENTLY LOST
/// @dev Throws unless `msg.sender` is the current owner, an authorized
/// operator, or the approved address for this NFT. Throws if `_from` is
/// not the current owner. Throws if `_to` is the zero address. Throws if
/// `_tokenId` is not a valid NFT.
/// @param _from The current owner of the NFT
/// @param _to The new owner
/// @param _tokenId The NFT to transfer
function transferFrom(address _from, address _to, uint256 _tokenId) external;
/// @notice Change or reaffirm the approved address for an NFT
/// @dev The zero address indicates there is no approved address.
/// Throws unless `msg.sender` is the current NFT owner, or an authorized
/// operator of the current owner.
/// @param _approved The new approved NFT controller
/// @param _tokenId The NFT to approve
function approve(address _approved, uint256 _tokenId) external;
/// @notice Enable or disable approval for a third party ("operator") to manage
/// all of `msg.sender`'s assets
/// @dev Emits the ApprovalForAll event. The contract MUST allow
/// multiple operators per owner.
/// @param _operator Address to add to the set of authorized operators
/// @param _approved True if the operator is approved, false to revoke approval
function setApprovalForAll(address _operator, bool _approved) external;
/// @notice Get the approved address for a single NFT
/// @dev Throws if `_tokenId` is not a valid NFT.
/// @param _tokenId The NFT to find the approved address for
/// @return The approved address for this NFT, or the zero address if there is none
function getApproved(uint256 _tokenId) external view returns (address);
/// @notice Query if an address is an authorized operator for another address
/// @param _owner The address that owns the NFTs
/// @param _operator The address that acts on behalf of the owner
/// @return True if `_operator` is an approved operator for `_owner`, false otherwise
function isApprovedForAll(address _owner, address _operator) external view returns (bool);
}
// File: IERC721Metadata.sol
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: ERC721.sol
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension
* Made for efficiancy!
*/
contract ERC721 is ERC165, IERC721, IERC721Metadata, DefaultOperatorFilterer, Ownable {
using Address for address;
using Strings for uint256;
uint16 public totalSupply;
address public proxyRegistryAddress;
string public baseURI;
// Mapping from token ID to owner address
mapping(uint256 => address) internal _owners;
// Mapping owner address to token count
mapping(address => uint256) internal _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(address _openseaProxyRegistry, string memory _baseURI) {
proxyRegistryAddress = _openseaProxyRegistry;
baseURI = _baseURI;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) external view override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() external pure override returns (string memory) {
return "Lofi Originals 3D";
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() external pure override returns (string memory) {
return "LO3D";
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) external view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
return string(abi.encodePacked(baseURI, tokenId.toString(), ".json"));
}
function setBaseURI(string memory uri) external onlyOwner {
baseURI = uri;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) external override onlyAllowedOperatorApproval(to) {
address owner = _owners[tokenId];
require(to != owner, "ERC721: approval to current owner");
require(
msg.sender == owner || isApprovedForAll(owner, msg.sender),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) external override onlyAllowedOperatorApproval(operator) {
_setApprovalForAll(msg.sender, operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view override returns (bool) {
// Whitelist OpenSea proxy contract for easy trading.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (address(proxyRegistry.proxies(owner)) == operator) {
return true;
}
return _operatorApprovals[owner][operator];
}
function setOpenseaProxyRegistry(address addr) external onlyOwner {
proxyRegistryAddress = addr;
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external override onlyAllowedOperatorApproval(from) {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(msg.sender, tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external override onlyAllowedOperator(from){
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override onlyAllowedOperator(from) {
require(_isApprovedOrOwner(msg.sender, tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = _owners[tokenId];
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(_owners[tokenId] == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
// Clear approvals from the previous owner
_approve(address(0), tokenId);
unchecked {
_balances[from]--;
_balances[to]++;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(msg.sender, from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
}
contract OwnableDelegateProxy {}
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
// File: LofiOriginals3D.sol
contract LofiOriginals3D is Ownable, IERC2981, ERC721 {
uint private EIP2981RoyaltyPercent;
constructor(
uint _royalty,
address _openseaProxyRegistry,
string memory _tempBaseURI
) ERC721(_openseaProxyRegistry, _tempBaseURI) {
EIP2981RoyaltyPercent = _royalty;
}
function batchMintFromReserve(uint[] memory amount, address[] memory to) external onlyOwner {
uint length = amount.length;
require(length == to.length, "array length missmatch");
uint tokenId = totalSupply;
uint total;
uint cAmount;
address cTo;
for (uint i; i < length;) {
assembly {
cAmount := mload(add(add(amount, 0x20), mul(i, 0x20)))
cTo := mload(add(add(to, 0x20), mul(i, 0x20)))
}
for (uint f; f < cAmount;) {
unchecked {
++tokenId;
++f;
}
_owners[tokenId] = cTo;
emit Transfer(address(0), cTo, tokenId);
}
unchecked {
_balances[cTo] += cAmount;
total += cAmount;
++i;
}
}
unchecked { totalSupply += uint16(total); }
}
/**
* @notice returns royalty info for EIP2981 supporting marketplaces
* @dev Called with the sale price to determine how much royalty is owed and to whom.
* @param tokenId - the NFT asset queried for royalty information
* @param salePrice - the sale price of the NFT asset specified by `tokenId`
* @return receiver - address of who should be sent the royalty payment
* @return royaltyAmount - the royalty payment amount for `salePrice`
*/
function royaltyInfo(uint tokenId, uint salePrice) external view override returns(address receiver, uint256 royaltyAmount) {
require(_exists(tokenId), "Royality querry for non-existant token!");
return(owner(), salePrice * EIP2981RoyaltyPercent / 10000);
}
/**
* @notice sets the royalty percentage for EIP2981 supporting marketplaces
* @dev percentage is in bassis points (parts per 10,000).
Example: 5% = 500, 0.5% = 50
* @param amount - percent amount
*/
function setRoyaltyPercent(uint256 amount) external onlyOwner {
EIP2981RoyaltyPercent = amount;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return
interfaceId == type(IERC2981).interfaceId ||
super.supportsInterface(interfaceId);
}
function tokensOfOwner(address owner) external view returns(uint[] memory) {
uint[] memory tokens = new uint[](_balances[owner]);
uint y = totalSupply + 1;
uint x;
for (uint i = 1; i < y;) {
if (ownerOf(i) == owner) {
tokens[x] = i;
unchecked{ ++x; }
}
unchecked{ ++i; }
}
return tokens;
}
}