Contract Name:
SpaceStationV2
Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity >= 0.6.2 < 0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns(bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size:= extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount } ("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns(bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns(bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns(bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns(bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value } (data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns(bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns(bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns(bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns(bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size:= mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.6.0 < 0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns(address) {
// Check the signature length
if (signature.length != 65) {
revert("ECDSA: invalid signature length");
}
// Divide the signature in r, s and v variables
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
// solhint-disable-next-line no-inline-assembly
assembly {
r:= mload(add(signature, 0x20))
s:= mload(add(signature, 0x40))
v:= byte(0, mload(add(signature, 0x60)))
}
return recover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover-bytes32-bytes-} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns(address) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
require(uint256(s) <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0, "ECDSA: invalid signature 's' value");
require(v == 27 || v == 28, "ECDSA: invalid signature 'v' value");
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
require(signer != address(0), "ECDSA: invalid signature");
return signer;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* replicates the behavior of the
* https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_sign[`eth_sign`]
* JSON-RPC method.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns(bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) internal {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = _getChainId();
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view virtual returns (bytes32) {
if (_getChainId() == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(bytes32 typeHash, bytes32 name, bytes32 version) private view returns (bytes32) {
return keccak256(
abi.encode(
typeHash,
name,
version,
_getChainId(),
address(this)
)
);
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", _domainSeparatorV4(), structHash));
}
function _getChainId() private view returns (uint256 chainId) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
// solhint-disable-next-line no-inline-assembly
assembly {
chainId := chainid()
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.6.0 < 0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns(uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns(uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns(bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns(uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns(bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns(bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
Copyright 2021 Project Galaxy.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.7.6;
/**
* @title IStarNFT
* @author Galaxy Protocol
*
* Interface for operating with StarNFTs.
*/
interface IStarNFT {
/* ============ Events =============== */
/* ============ Functions ============ */
function isOwnerOf(address, uint256) external view returns (bool);
function getNumMinted() external view returns (uint256);
// mint
function mint(address account, uint256 powah) external returns (uint256);
function mintBatch(address account, uint256 amount, uint256[] calldata powahArr) external returns (uint256[] memory);
function burn(address account, uint256 id) external;
function burnBatch(address account, uint256[] calldata ids) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.6.0 < 0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns(bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns(bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns(bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns(bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns(bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns(uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns(uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns(uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns(uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns(uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns(uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns(uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns(uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
/*
Copyright 2021 Project Galaxy.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.7.6;
import {Address} from "Address.sol";
import {SafeMath} from "SafeMath.sol";
import {IERC20} from "IERC20.sol";
import {EIP712} from "EIP712.sol";
import {ECDSA} from "ECDSA.sol";
import {IStarNFT} from "IStarNFT.sol"; //0.7.6
/**
* @title SpaceStation
* @author Galaxy Protocol
*
* Campaign contract that allows privileged DAOs to initiate campaigns for members to claim StarNFTs.
*/
contract SpaceStationV2 is EIP712 {
using Address for address;
using SafeMath for uint256;
/* ============ Events ============ */
event EventActivateCampaign(uint256 _cid);
event EventClaim(
uint256 _cid,
uint256 _dummyId,
uint256 _nftID,
IStarNFT _starNFT,
address _sender
);
event EventClaimCapped(
uint256 _cid,
uint256 _dummyId,
uint256 _nftID,
IStarNFT _starNFT,
address _sender,
uint256 _minted,
uint256 _cap
);
event EventClaimBatch(
uint256 _cid,
uint256[] _dummyIdArr,
uint256[] _nftIDArr,
IStarNFT _starNFT,
address _sender
);
event EventClaimBatchCapped(
uint256 _cid,
uint256[] _dummyIdArr,
uint256[] _nftIDArr,
IStarNFT _starNFT,
address _sender,
uint256 _minted,
uint256 _cap
);
event EventForge(
uint256 _cid,
uint256 _dummyId,
uint256 _nftID,
IStarNFT _starNFT,
address _sender
);
/* ============ Modifiers ============ */
/**
* Throws if the sender is not a campaign setter, gnosis
*/
modifier onlyCampaignSetter() {
_validateOnlyCampaignSetter();
_;
}
/**
* Throws if the sender is not a manager: pauser_role and upgrader_role, gnosis
*/
modifier onlyManager() {
_validateOnlyManager();
_;
}
/**
* Throws if the sender is not a Treasury's manager, gnosis safe
*/
modifier onlyTreasuryManager() {
_validateOnlyTreasuryManager();
_;
}
/**
* Throws if the contract paused
*/
modifier onlyNoPaused() {
_validateOnlyNotPaused();
_;
}
/* ============ Enums ================ */
/* ============ Structs ============ */
struct CampaignFeeConfig {
address erc20; // Address of token asset if required
uint256 erc20Fee; // Amount of token if required
uint256 platformFee; // Amount of fee for using the service if applicable
}
/* ============ State Variables ============ */
// Is contract paused.
bool public paused;
// The galaxy signer(EOA): used to verify EIP-712.
address public galaxy_signer;
// A campaign setter. TODO: mapping of EOAs to reduce multisig tx gas cost.
address public campaign_setter;
// The manager which has privilege to do upgrades, pause/unpause.
address public manager;
// Treasury manager which receives fees.
address public treasury_manager;
// Mapping that stores all fee requirements for a given activated campaign.
// If no fee is required at all, should set to all zero values except for `isActive`.
mapping(uint256 => CampaignFeeConfig) public campaignFeeConfigs;
// hasMinted(dummyID(signature) => bool) that records if the user account has already used the dummyID(signature).
mapping(uint256 => bool) public hasMinted;
// for capped campaign usage only
mapping(uint256 => uint256) public numMinted;
/* ============ Constructor ============ */
constructor(
address _galaxy_signer,
address _campaign_setter,
address _contract_manager,
address _treasury_manager
) EIP712("Galaxy", "1.0.0") {
// require(galaxy_signer != address(0), "Galaxy signer address must not be null address");
// require(campaign_setter != address(0), "Campaign setter address must not be null address");
// require(contract_manager != address(0), "Contract manager address must not be null address");
// require(treasury_manager != address(0), "Treasury manager address must not be null address");
galaxy_signer = _galaxy_signer;
campaign_setter = _campaign_setter;
manager = _contract_manager;
treasury_manager = _treasury_manager;
}
/* ============ External Functions ============ */
function activateCampaign(
uint256 _cid,
uint256 _platformFee,
uint256 _erc20Fee,
address _erc20
) external onlyCampaignSetter {
_setFees(_cid, _platformFee, _erc20Fee, _erc20);
emit EventActivateCampaign(_cid);
}
function claim(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
address _mintTo,
bytes calldata _signature
) public payable onlyNoPaused {
require(!hasMinted[_dummyId], "Already minted");
require(
_verify(
_hash(_cid, _starNFT, _dummyId, _powah, _mintTo),
_signature
),
"Invalid signature"
);
hasMinted[_dummyId] = true;
_payFees(_cid, 1);
uint256 nftID = _starNFT.mint(_mintTo, _powah);
emit EventClaim(_cid, _dummyId, nftID, _starNFT, _mintTo);
}
function claim(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
bytes calldata _signature
) external payable onlyNoPaused {
claim(_cid, _starNFT, _dummyId, _powah, msg.sender, _signature);
}
function claimBatch(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
address _mintTo,
bytes calldata _signature
) public payable onlyNoPaused {
require(
_dummyIdArr.length > 0,
"Array(_dummyIdArr) should not be empty"
);
require(
_powahArr.length == _dummyIdArr.length,
"Array(_powahArr) length mismatch"
);
for (uint256 i = 0; i < _dummyIdArr.length; i++) {
require(!hasMinted[_dummyIdArr[i]], "Already minted");
hasMinted[_dummyIdArr[i]] = true;
}
require(
_verify(
_hashBatch(_cid, _starNFT, _dummyIdArr, _powahArr, _mintTo),
_signature
),
"Invalid signature"
);
_payFees(_cid, _dummyIdArr.length);
uint256[] memory nftIdArr = _starNFT.mintBatch(
_mintTo,
_powahArr.length,
_powahArr
);
emit EventClaimBatch(_cid, _dummyIdArr, nftIdArr, _starNFT, _mintTo);
}
function claimBatch(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
bytes calldata _signature
) external payable onlyNoPaused {
claimBatch(_cid, _starNFT, _dummyIdArr, _powahArr, msg.sender, _signature);
}
function claimCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
uint256 _cap,
address _mintTo,
bytes calldata _signature
) public payable onlyNoPaused {
require(!hasMinted[_dummyId], "Already minted");
require(numMinted[_cid] < _cap, "Reached cap limit");
require(
_verify(
_hashCapped(_cid, _starNFT, _dummyId, _powah, _cap, _mintTo),
_signature
),
"Invalid signature"
);
hasMinted[_dummyId] = true;
numMinted[_cid] = numMinted[_cid] + 1;
_payFees(_cid, 1);
uint256 nftID = _starNFT.mint(_mintTo, _powah);
uint256 minted = numMinted[_cid];
emit EventClaimCapped(_cid, _dummyId, nftID, _starNFT, _mintTo, minted, _cap);
}
function claimCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
uint256 _cap,
bytes calldata _signature
) external payable onlyNoPaused {
claimCapped(_cid, _starNFT, _dummyId, _powah, _cap, msg.sender, _signature);
}
function claimBatchCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
uint256 _cap,
address _mintTo,
bytes calldata _signature
) public payable onlyNoPaused {
require(
_dummyIdArr.length > 0,
"Array(_dummyIdArr) should not be empty"
);
require(
_powahArr.length == _dummyIdArr.length,
"Array(_powahArr) length mismatch"
);
require(
numMinted[_cid] + _dummyIdArr.length <= _cap,
"Reached cap limit"
);
for (uint256 i = 0; i < _dummyIdArr.length; i++) {
require(!hasMinted[_dummyIdArr[i]], "Already minted");
hasMinted[_dummyIdArr[i]] = true;
}
require(
_verify(
_hashBatchCapped(
_cid,
_starNFT,
_dummyIdArr,
_powahArr,
_cap,
_mintTo
),
_signature
),
"Invalid signature"
);
numMinted[_cid] = numMinted[_cid] + _dummyIdArr.length;
_payFees(_cid, _dummyIdArr.length);
uint256[] memory nftIdArr = _starNFT.mintBatch(
_mintTo,
_powahArr.length,
_powahArr
);
uint256 minted = numMinted[_cid];
emit EventClaimBatchCapped(_cid, _dummyIdArr, nftIdArr, _starNFT, _mintTo, minted, _cap);
}
function claimBatchCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
uint256 _cap,
bytes calldata _signature
) external payable onlyNoPaused {
claimBatchCapped(_cid, _starNFT, _dummyIdArr, _powahArr, _cap, msg.sender, _signature);
}
function forge(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _nftIDs,
uint256 _dummyId,
uint256 _powah,
address _mintTo,
bytes calldata _signature
) public payable onlyNoPaused {
require(!hasMinted[_dummyId], "Already minted");
require(
_verify(
_hashForge(
_cid,
_starNFT,
_nftIDs,
_dummyId,
_powah,
_mintTo
),
_signature
),
"Invalid signature"
);
hasMinted[_dummyId] = true;
for (uint256 i = 0; i < _nftIDs.length; i++) {
require(
_starNFT.isOwnerOf(_mintTo, _nftIDs[i]),
"Not the owner"
);
}
_starNFT.burnBatch(_mintTo, _nftIDs);
_payFees(_cid, 1);
uint256 nftID = _starNFT.mint(_mintTo, _powah);
emit EventForge(_cid, _dummyId, nftID, _starNFT, _mintTo);
}
function forge(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _nftIDs,
uint256 _dummyId,
uint256 _powah,
bytes calldata _signature
) external payable onlyNoPaused {
forge(_cid, _starNFT, _nftIDs, _dummyId, _powah, msg.sender, _signature);
}
receive() external payable {
// anonymous transfer: to treasury_manager
(bool success, ) = treasury_manager.call{value: msg.value}(
new bytes(0)
);
require(success, "Transfer failed");
}
fallback() external payable {
if (msg.value > 0) {
// call non exist function: send to treasury_manager
(bool success, ) = treasury_manager.call{value: msg.value}(new bytes(0));
require(success, "Transfer failed");
}
}
/**
* PRIVILEGED MODULE FUNCTION. Function that update galaxy signer address.
*/
function updateGalaxySigner(address newAddress) external onlyManager {
require(
newAddress != address(0),
"Galaxy signer address must not be null address"
);
galaxy_signer = newAddress;
}
/**
* PRIVILEGED MODULE FUNCTION. Function that update galaxy signer address.
*/
function updateCampaignSetter(address newAddress) external onlyManager {
require(
newAddress != address(0),
"Campaign setter address must not be null address"
);
campaign_setter = newAddress;
}
/**
* PRIVILEGED MODULE FUNCTION. Function that update manager address.
*/
function updateManager(address newAddress) external onlyManager {
require(
newAddress != address(0),
"Manager address must not be null address"
);
manager = newAddress;
}
/**
* PRIVILEGED MODULE FUNCTION. Function that update treasure manager address.
*/
function updateTreasureManager(address payable newAddress)
external
onlyTreasuryManager
{
require(
newAddress != address(0),
"Treasure manager must not be null address"
);
treasury_manager = newAddress;
}
/**
* PRIVILEGED MODULE FUNCTION. Function that pause the contract.
*/
function setPause(bool _paused) external onlyManager {
paused = _paused;
}
/* ============ Internal Functions ============ */
function _hash(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
address _account
) public view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256(
"NFT(uint256 cid,address starNFT,uint256 dummyId,uint256 powah,address account)"
),
_cid,
_starNFT,
_dummyId,
_powah,
_account
)
)
);
}
function _hashCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256 _dummyId,
uint256 _powah,
uint256 _cap,
address _account
) public view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256(
"NFT(uint256 cid,address starNFT,uint256 dummyId,uint256 powah,uint256 cap,address account)"
),
_cid,
_starNFT,
_dummyId,
_powah,
_cap,
_account
)
)
);
}
function _hashBatch(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
address _account
) public view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256(
"NFT(uint256 cid,address starNFT,uint256[] dummyIdArr,uint256[] powahArr,address account)"
),
_cid,
_starNFT,
keccak256(abi.encodePacked(_dummyIdArr)),
keccak256(abi.encodePacked(_powahArr)),
_account
)
)
);
}
function _hashBatchCapped(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _dummyIdArr,
uint256[] calldata _powahArr,
uint256 _cap,
address _account
) public view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256(
"NFT(uint256 cid,address starNFT,uint256[] dummyIdArr,uint256[] powahArr,uint256 cap,address account)"
),
_cid,
_starNFT,
keccak256(abi.encodePacked(_dummyIdArr)),
keccak256(abi.encodePacked(_powahArr)),
_cap,
_account
)
)
);
}
// todo: change to internal on PRD
function _hashForge(
uint256 _cid,
IStarNFT _starNFT,
uint256[] calldata _nftIDs,
uint256 _dummyId,
uint256 _powah,
address _account
) public view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256(
"NFT(uint256 cid,address starNFT,uint256[] nftIDs,uint256 dummyId,uint256 powah,address account)"
),
_cid,
_starNFT,
keccak256(abi.encodePacked(_nftIDs)),
_dummyId,
_powah,
_account
)
)
);
}
// todo: change to internal on PRD
function _verify(bytes32 hash, bytes calldata signature)
public
view
returns (bool)
{
return ECDSA.recover(hash, signature) == galaxy_signer;
}
function _setFees(
uint256 _cid,
uint256 _platformFee,
uint256 _erc20Fee,
address _erc20
) private {
require(
(_erc20 == address(0) && _erc20Fee == 0) ||
(_erc20 != address(0) && _erc20Fee != 0),
"Invalid erc20 fee requirement arguments"
);
campaignFeeConfigs[_cid] = CampaignFeeConfig(
_erc20,
_erc20Fee,
_platformFee
);
}
function _payFees(uint256 _cid, uint256 amount) private {
require(amount > 0, "Must mint more than 0");
CampaignFeeConfig memory feeConf = campaignFeeConfigs[_cid];
// 1. pay platformFee if needed
if (feeConf.platformFee > 0) {
require(
msg.value >= feeConf.platformFee.mul(amount),
"Insufficient Payment"
);
(bool success, ) = treasury_manager.call{value: msg.value}(
new bytes(0)
);
require(success, "Transfer platformFee failed");
}
// 2. pay erc20_fee if needed
if (feeConf.erc20Fee > 0) {
// user wallet transfer <erc20> of <feeConf.erc20Fee> to <this contract>.
require(
IERC20(feeConf.erc20).transferFrom(
msg.sender,
treasury_manager,
feeConf.erc20Fee.mul(amount)
),
"Transfer erc20Fee failed"
);
}
}
/**
* Due to reason error bloat, internal functions are used to reduce bytecode size
*/
function _validateOnlyCampaignSetter() internal view {
require(msg.sender == campaign_setter, "Only campaignSetter can call");
}
function _validateOnlyManager() internal view {
require(msg.sender == manager, "Only manager can call");
}
function _validateOnlyTreasuryManager() internal view {
require(
msg.sender == treasury_manager,
"Only treasury manager can call"
);
}
function _validateOnlyNotPaused() internal view {
require(!paused, "Contract paused");
}
}