Contract Source Code:
File 1 of 1 : Commodity
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
contract Initializable {
bool inited = false;
modifier initializer() {
require(!inited, "already inited");
_;
inited = true;
}
}
contract EIP712Base is Initializable {
struct EIP712Domain {
string name;
string version;
address verifyingContract;
bytes32 salt;
}
string public constant ERC712_VERSION = "1";
bytes32 internal constant EIP712_DOMAIN_TYPEHASH =
keccak256(
bytes(
"EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
)
);
bytes32 internal domainSeperator;
function _initializeEIP712(string memory name) internal initializer {
_setDomainSeperator(name);
}
function _setDomainSeperator(string memory name) internal {
domainSeperator = keccak256(
abi.encode(
EIP712_DOMAIN_TYPEHASH,
keccak256(bytes(name)),
keccak256(bytes(ERC712_VERSION)),
address(this),
bytes32(getChainId())
)
);
}
function getDomainSeperator() public view returns (bytes32) {
return domainSeperator;
}
function getChainId() public view returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
function toTypedMessageHash(bytes32 messageHash)
internal
view
returns (bytes32)
{
return keccak256(abi.encode(getDomainSeperator(), messageHash));
}
}
contract NativeMetaTransaction is EIP712Base {
bytes32 private constant META_TRANSACTION_TYPEHASH =
keccak256(
bytes(
"MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
)
);
event MetaTransactionExecuted(
address userAddress,
address payable relayerAddress,
bytes functionSignature
);
mapping(address => uint256) nonces;
struct MetaTransaction {
uint256 nonce;
address from;
bytes functionSignature;
}
function executeMetaTransaction(
address userAddress,
bytes memory functionSignature,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) external payable returns (bytes memory) {
MetaTransaction memory metaTx = MetaTransaction({
nonce: nonces[userAddress],
from: userAddress,
functionSignature: functionSignature
});
require(
verify(userAddress, metaTx, sigR, sigS, sigV),
"Signer and signature do not match"
);
nonces[userAddress] += 1;
emit MetaTransactionExecuted(
userAddress,
payable(msg.sender),
functionSignature
);
(bool success, bytes memory returnData) = address(this).call(
abi.encodePacked(functionSignature, userAddress)
);
require(success, "Function call not successful");
return returnData;
}
function hashMetaTransaction(MetaTransaction memory metaTx)
internal
pure
returns (bytes32)
{
return
keccak256(
abi.encode(
META_TRANSACTION_TYPEHASH,
metaTx.nonce,
metaTx.from,
keccak256(metaTx.functionSignature)
)
);
}
function getNonce(address user) public view returns (uint256 nonce) {
nonce = nonces[user];
}
function verify(
address signer,
MetaTransaction memory metaTx,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) internal view returns (bool) {
require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
return
signer ==
ecrecover(
toTypedMessageHash(hashMetaTransaction(metaTx)),
sigV,
sigR,
sigS
);
}
}
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
abstract contract ContextMixin {
function msgSender() internal view returns (address payable sender) {
if (msg.sender == address(this)) {
bytes memory array = msg.data;
uint256 index = msg.data.length;
assembly {
sender := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
} else {
sender = payable(msg.sender);
}
return sender;
}
}
abstract contract ProxyRegistry {
mapping(address => address) public proxies;
}
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
function _baseURI() internal view virtual returns (string memory) {
return "";
}
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
/**
* @title ERC721Tradable
* ERC721Tradable - ERC721 contract that whitelists a trading address, and has minting functionality.
*/
abstract contract ERC721Tradable is
ERC721,
ContextMixin,
Pausable,
NativeMetaTransaction,
Ownable
{
using Address for address;
using SafeMath for uint256;
using Counters for Counters.Counter;
// tokendcount
Counters.Counter private _nextTokenId;
address public proxyRegistryAddress;
mapping(address => uint256) private _balances;
mapping(uint256 => address) private _owners;
mapping(uint256 => address) private _tokenApprovals;
constructor(string memory _name, string memory _symbol)
ERC721(_name, _symbol)
{
proxyRegistryAddress = _msgSender();
_nextTokenId.increment();
_initializeEIP712(_name);
}
modifier onlyOwnerOrProxy() {
require(
_isOwnerOrProxy(_msgSender()),
"ERC721Tradable#onlyOwner: CALLER_IS_NOT_OWNER"
);
_;
}
modifier onlyApproved(address _from) {
require(
_from == _msgSender() || isApprovedForAll(_from, _msgSender()),
"ERC721Tradable#onlyApproved: CALLER_NOT_ALLOWED"
);
_;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner,
"ERC721: approve caller is not owner nor approved for all"
);
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
function pause() external onlyOwnerOrProxy {
_pause();
}
function unpause() external onlyOwnerOrProxy {
_unpause();
}
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
function exists(uint256 tokenId) public view returns (bool) {
return _owners[tokenId] != address(0);
}
function totalSupply() public view returns (uint256) {
return _nextTokenId.current() - 1;
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override whenNotPaused {
require(
_isOwnerOrProxy(_msgSender()) ||
ownerOf(tokenId) == from ||
isApprovedForAll(ownerOf(tokenId), _msgSender()),
"ERC721: transfer of token that is not own or Proxy"
);
require(to != address(0), "ERC721: transfer to the zero address");
if (from != ownerOf(tokenId)) {
from = ownerOf(tokenId);
}
_beforeTokenTransfer(from, to, tokenId);
_tokenApprovals[tokenId] = address(0);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
require(
checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
emit Transfer(from, to, tokenId);
}
function mintTo(address _to, bytes memory _data) internal whenNotPaused {
uint256 currentTokenId = _nextTokenId.current();
_nextTokenId.increment();
require(!_exists(currentTokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), _to, currentTokenId);
_balances[_to] += 1;
_owners[currentTokenId] = _to;
require(
checkOnERC721Received(address(0), _to, currentTokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
emit Transfer(address(0), _to, currentTokenId);
}
function burn(uint256 tokenId) internal whenNotPaused {
address owner = ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
function checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function _isOwnerOrProxy(address operator) internal view returns (bool) {
return owner() == operator || _isProxyForUser(owner(), operator);
}
function _isProxyForUser(address owner, address operator)
internal
view
returns (bool)
{
if (!proxyRegistryAddress.isContract()) {
return false;
}
return
address(ProxyRegistry(proxyRegistryAddress).proxies(owner)) ==
operator;
}
function baseTokenURI() public view virtual returns (string memory);
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
return
string(
abi.encodePacked(baseTokenURI(), Strings.toString(_tokenId))
);
}
function _msgSender() internal view override returns (address sender) {
return ContextMixin.msgSender();
}
function _exists(uint256 tokenId)
internal
view
virtual
override
returns (bool)
{
return _owners[tokenId] != address(0);
}
}
contract AssetContract is ERC721Tradable, ReentrancyGuard {
using SafeMath for uint256;
using Strings for uint256;
event PermanentURI(string _value, uint256 indexed _id);
string public templateURI;
uint256 public PRODUCE_TOKEN_MAX = 1;
address public mineAcceptAddr;
address public mintAddr;
mapping(string => uint256[]) private _tokenSell;
mapping(string => uint256) private tokenPrice;
mapping(uint256 => string) private _idTokenType;
mapping(string => uint256) private _tokenTypeProduce;
mapping(uint256 => string) private _tokenURI;
mapping(uint256 => bool) private _isPermanentURI;
constructor(
string memory _name,
string memory _symbol,
uint256 _tokenPrice,
string memory _tokentype,
string memory _templateURI,
address _mintAddr
) ERC721Tradable(_name, _symbol) {
if (bytes(_templateURI).length > 0) {
setTemplateURI(_templateURI);
}
mintAddr = _mintAddr;
mineAcceptAddr = _msgSender();
putSell(_tokentype, PRODUCE_TOKEN_MAX, _tokenPrice);
}
modifier onlyOwnerOrThis() {
require(
owner() == _msgSender() || address(this) == _msgSender(),
"Ownable: caller is not the owner"
);
_;
}
function functionCall(
address target,
bytes memory data,
uint256 value
) public payable onlyOwnerOrProxy returns (bytes memory) {
return Address.functionCallWithValue(target, data, value);
}
function changeAcceptAddr(address acceptAddr) public onlyOwnerOrProxy {
mineAcceptAddr = acceptAddr;
}
function setTemplateURI(string memory _uri) public onlyOwnerOrProxy {
templateURI = _uri;
}
function tokenPriceOf(string memory _tokenType)
public
view
returns (uint256)
{
return tokenPrice[_tokenType];
}
function balanceOf(address _owner) public view override returns (uint256) {
return
_isOwnerOrProxy(_owner)
? super.totalSupply()
: super.balanceOf(_owner);
}
function ownerOf(uint256 tokenId) public view override returns (address) {
return super.ownerOf(tokenId);
}
modifier onlyTokenAmountOwned(address _from, uint256 _id) {
require(
_ownsTokenAmount(_from, _id),
"AssetContract#onlyTokenAmountOwned: ONLY_TOKEN_AMOUNT_OWNED_ALLOWED"
);
_;
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
function safeTransferFrom(
address _from,
address _to,
uint256 _id
) public virtual override {
safeTransferFrom(_from, _to, _id, "");
}
function safeTransferFrom(
address _from,
address _to,
uint256 _id,
bytes memory _data
) public virtual override {
require(
_ownsTokenAmount(_msgSender(), _id),
"AssetContract#onlyTokenAmountOwned: ONLY_TOKEN_AMOUNT_OWNED_ALLOWED"
);
if (_isOwnerOrProxy(_msgSender())) {
_from = ownerOf(_id);
}
require(_from != _to, "AssetContract#ownerOfToken: from equal to addr");
super.safeTransferFrom(_from, _to, _id, _data);
}
function tokenSell(string memory _tokenType, uint256 index)
public
view
returns (uint256)
{
return _tokenSell[_tokenType][index];
}
function tokenTypeOf(string memory tokenType)
public
view
returns (uint256)
{
return _tokenTypeProduce[tokenType];
}
function mintTo(
string memory _tokenType,
uint256 numberOfTokens,
bytes memory _data
) public payable nonReentrant {
require(
tokenPrice[_tokenType].mul(numberOfTokens) == msg.value,
"Ether value is not correct"
);
_mint(_tokenType, numberOfTokens, _data);
payable(mineAcceptAddr).transfer(msg.value);
}
function tokenMake(string memory _tokenType, uint256 numberOfTokens)
public
payable
nonReentrant
{
require(
tokenPrice[_tokenType].mul(numberOfTokens) == msg.value,
"Ether value is not correct"
);
uint256 count = tokenTypeOf(_tokenType);
require(count >= numberOfTokens, " token number surplus not enough");
uint256 index = 1;
for (uint256 i = numberOfTokens; i > 0; i--) {
require(i >= 0, " token number i not enough");
uint256 tokenId = _tokenSell[_tokenType][count - index];
super.safeTransferFrom(owner(), _msgSender(), tokenId, "");
index++;
}
_tokenTypeProduce[_tokenType] = count - numberOfTokens;
payable(mineAcceptAddr).transfer(msg.value);
}
function setTokenPriceOf(string memory _tokenType, uint256 _tokenPrice)
public
onlyOwnerOrProxy
returns (uint256)
{
return tokenPrice[_tokenType] = _tokenPrice;
}
function putSell(
string memory _tokenType,
uint256 numberOfTokens,
uint256 _tokenPrice
) public onlyOwnerOrProxy {
tokenPrice[_tokenType] = _tokenPrice;
_tokenTypeProduce[_tokenType] = numberOfTokens;
_mint(_tokenType, numberOfTokens, bytes(baseTokenURI()));
}
function _mint(
string memory _tokenType,
uint256 numberOfTokens,
bytes memory _data
) private {
uint256[] memory array = new uint256[](numberOfTokens);
for (uint256 i = 0; i < numberOfTokens; i++) {
_idTokenType[totalSupply() + 1] = _tokenType;
array[i] = totalSupply() + 1;
mintTo(mintAddr, _data);
}
_tokenSell[_tokenType] = array;
}
function burn(address _from, uint256 _id)
public
onlyTokenAmountOwned(_from, _id)
{
super.burn(_id);
}
function _ownsTokenAmount(address _from, uint256 _id)
internal
view
returns (bool)
{
return
_isOwnerOrProxy(_from)
? true
: (ownerOf(_id) == _from ||
isApprovedForAll(ownerOf(_id), _msgSender()));
}
modifier onlyImpermanentURI(uint256 id) {
require(
!isPermanentURI(id),
"AssetContract#onlyImpermanentURI: URI_CANNOT_BE_CHANGED"
);
_;
}
function setPermanentURI(uint256 _id, string memory _uri)
public
onlyOwnerOrProxy
onlyImpermanentURI(_id)
{
_setPermanentURI(_id, _uri);
}
function isPermanentURI(uint256 _id) public view returns (bool) {
return _isPermanentURI[_id];
}
function tokenURI(uint256 tokenId)
public
view
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory tokenUri = _tokenURI[tokenId];
if (bytes(baseTokenURI()).length == 0) {
return tokenUri;
}
if (bytes(tokenUri).length > 0) {
return string(tokenUri);
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return
string(
abi.encodePacked(
baseTokenURI(),
(_idTokenType[tokenId]),
"/",
(tokenId.toString())
)
);
}
function setURI(uint256 _id, string memory _uri)
public
onlyOwnerOrProxy
onlyImpermanentURI(_id)
{
_tokenURI[_id] = _uri;
}
function _setPermanentURI(uint256 _id, string memory _uri) internal {
require(
bytes(_uri).length > 0,
"AssetContract#setPermanentURI: ONLY_VALID_URI"
);
_isPermanentURI[_id] = true;
_setURI(_id, _uri);
emit PermanentURI(_uri, _id);
}
function _setURI(uint256 _id, string memory _uri) internal {
_tokenURI[_id] = _uri;
}
function baseTokenURI() public view override returns (string memory) {
return templateURI;
}
}
contract Commodity is AssetContract {
constructor()
AssetContract(
"THING",
"THING",
10 * 10**18,
"hotsales",
"http://164.155.49.105/api/thing/info/",
0x85FE87E86024B24dBc64DbaE43882bA56f302726
)
{}
}