Contract Source Code:

// SPDX-License-Identifier: MIT

/**

Website: https://www.recursiveprotocol.com
Docs:    https://docs.recursiveprotocol.com

Telegram:  https://t.me/recursiveprotocol
Twitter:   https://twitter.com/recursive_prtcl

*/

pragma solidity ^0.8.10;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */

abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint);

    function balanceOf(address owner) external view returns (uint);

    function allowance(
        address owner,
        address spender
    ) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);

    function transfer(address to, uint value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint);

    function permit(
        address owner,
        address spender,
        uint value,
        uint deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    function sync() external;
}

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(
        address tokenA,
        address tokenB
    ) external view returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(
        address tokenA,
        address tokenB
    ) external returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB, uint256 liquidity);

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);

    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);

    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);

    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);

    function getAmountsOut(
        uint256 amountIn,
        address[] calldata path
    ) external view returns (uint256[] memory amounts);

    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);

    function getAmountsIn(
        uint256 amountOut,
        address[] calldata path
    ) external view returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);

    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(
        uint256 a,
        uint256 b
    ) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(
        address owner,
        address spender
    ) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

contract RecursiveFi is Context, IERC20, Ownable {
    using SafeMath for uint256;

    string private _name = "Recursive Finance";
    string private _symbol = "RCS";
    uint8 private _decimals = 9;

    mapping(address => uint256) _balances;
    mapping(address => mapping(address => uint256)) private _allowances;

    mapping(address => bool) public checkExcludedFromFees;
    mapping(address => bool) public checkWalletLimitExcept;
    mapping(address => bool) public checkTxLimitExcept;
    mapping(address => bool) public checkMarketPair;

    uint256 public _liquidityShares = 0;
    uint256 public _marketingShares = 10;

    uint256 public _totalTaxIfBuying = 15;
    uint256 public _totalTaxIfSelling = 15;
    uint256 public _totalDistributionShares = 10;

    uint256 public _buyLiquidityFees = 0;
    uint256 public _buyMarketingFees = 15;

    uint256 public _sellLiquidityFees = 0;
    uint256 public _sellMarketingFees = 15;

    uint256 private _totalSupply = 100_000_000 * 10 ** 9;
    uint256 public maxTxAmount = (_totalSupply * 20) / 1000;
    uint256 public maxWallet = (_totalSupply * 20) / 1000;
    uint256 public maxTaxSwap = (_totalSupply * 2) / 1000;
    uint256 private minTokensToSwap = _totalSupply / 100000;

    address payable private taxWallet =
        payable(0xABB4B6A246eE4621c7E08845e9Eb33fE54489518);
    address public immutable DEAD = 0x000000000000000000000000000000000000dEaD;

    IUniswapV2Router02 public uniswapV2Router;
    address public uniswapV2Pair;

    bool inSwapAndLiquify;
    bool public swapAndLiquifyEnabled = false;
    bool public swapAndLiquifyByLimitOnly = false;
    bool public checkWalletLimit = true;
    bool public tradingOpen = false;

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );

    modifier lockTheSwap() {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

    constructor() {

        checkExcludedFromFees[owner()] = true;
        checkExcludedFromFees[taxWallet] = true;
        checkExcludedFromFees[address(this)] = true;

        checkWalletLimitExcept[owner()] = true;
        checkWalletLimitExcept[taxWallet] = true;
        checkWalletLimitExcept[address(this)] = true;

        checkTxLimitExcept[owner()] = true;
        checkTxLimitExcept[taxWallet] = true;
        checkTxLimitExcept[address(this)] = true;

        _balances[_msgSender()] = _totalSupply;

        emit Transfer(address(0), _msgSender(), _totalSupply);
    }

    function addLiquidityETH() external payable onlyOwner {
        uniswapV2Router = IUniswapV2Router02(
            0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
        );

        uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
            address(this),
            uniswapV2Router.WETH()
        );

        _approve(address(this), address(uniswapV2Router), _totalSupply);

        checkMarketPair[address(uniswapV2Pair)] = true;
        checkWalletLimitExcept[address(uniswapV2Pair)] = true;

        uniswapV2Router.addLiquidityETH{value: msg.value}(
            address(this),
            balanceOf(address(this)),
            0,
            0,
            owner(),
            block.timestamp
        );
    }

    function name() public view returns (string memory) {
        return _name;
    }

    function symbol() public view returns (string memory) {
        return _symbol;
    }

    function decimals() public view returns (uint8) {
        return _decimals;
    }

    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    function allowance(
        address owner,
        address spender
    ) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(
        address spender,
        uint256 amount
    ) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function enableTrading() external onlyOwner {
        require(!tradingOpen, "trading is already open");
        tradingOpen = true;
        swapAndLiquifyEnabled = true;        
    }

    function setBuyFees(
        uint256 newLiquidityTax,
        uint256 newMarketingTax
    ) external onlyOwner {
        _buyLiquidityFees = newLiquidityTax;
        _buyMarketingFees = newMarketingTax;

        _totalTaxIfBuying = _buyLiquidityFees.add(_buyMarketingFees);
        require(_totalTaxIfBuying <= 10);
    }

    function setSellFees(
        uint256 newLiquidityTax,
        uint256 newMarketingTax
    ) external onlyOwner {
        _sellLiquidityFees = newLiquidityTax;
        _sellMarketingFees = newMarketingTax;

        _totalTaxIfSelling = _sellLiquidityFees.add(_sellMarketingFees);
        require(_totalTaxIfSelling <= 20);
    }

    function setDistributionSettings(
        uint256 newLiquidityShare,
        uint256 newMarketingShare
    ) external onlyOwner {
        _liquidityShares = newLiquidityShare;
        _marketingShares = newMarketingShare;

        _totalDistributionShares = _liquidityShares.add(_marketingShares);
    }

    function setcheckWalletLimitExcept(
        address holder,
        bool exempt
    ) external onlyOwner {
        checkWalletLimitExcept[holder] = exempt;
    }

    function setWalletLimit(uint256 newLimit) external onlyOwner {
        maxWallet = newLimit;
    }

    function setTaxWallet(address newAddress) external onlyOwner {
        taxWallet = payable(newAddress);
    }

    function min(uint256 a, uint256 b) private pure returns (uint256){
      return (a>b)?b:a;
    }

    function removeLimits() external onlyOwner returns (bool) {
        _totalTaxIfBuying = 2;
        _totalTaxIfSelling = 2;

        _buyLiquidityFees = 0;
        _buyMarketingFees = 2;

        _sellLiquidityFees = 0;
        _sellMarketingFees = 2;

        maxWallet = ~uint256(0);
        maxTxAmount = ~uint256(0);

        return true;
    }

    function updateMaxTxAmount(uint256 maxTxAmount_) external onlyOwner {
        require(
            maxTxAmount_ >= _totalSupply / 100,
            "Max wallet should be more or equal to 1%"
        );
        maxTxAmount = maxTxAmount_;
    }

    function enableDisableWalletLimit(bool newValue) external onlyOwner {
        checkWalletLimit = newValue;
    }

    function setSwapAndLiquifyByLimitOnly(bool newValue) public onlyOwner {
        swapAndLiquifyByLimitOnly = newValue;
    }

    function getCirculatingSupply() public view returns (uint256) {
        return _totalSupply.sub(balanceOf(DEAD));
    }

    function swapAndLiquify(uint256 tAmount) private lockTheSwap {
        uint256 contractTokenBalance = balanceOf(address(this));

        uint256 amountToSwap = min(tAmount, min(contractTokenBalance, maxTaxSwap));

        swapTokensForEth(amountToSwap);

        uint256 amountETHMarketing = address(this).balance;

        transferToAddressETH(taxWallet, amountETHMarketing);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this), // The contract
            block.timestamp
        );
    }

    function takeFees(
        address sender,
        address recipient,
        uint256 amount
    ) internal view returns (uint256, uint256) {
        uint256 feeAmount = amount;

        if (checkExcludedFromFees[sender]) return (amount, feeAmount);

        if (checkMarketPair[sender]) {
            feeAmount = amount.mul(_totalTaxIfBuying).div(100);
        } else if (checkMarketPair[recipient]) {
            feeAmount = amount.mul(_totalTaxIfSelling).div(100);
        }

        return (amount.sub(feeAmount), feeAmount);
    }

    function transferToAddressETH(
        address payable recipient,
        uint256 amount
    ) private {
        recipient.transfer(amount);
    }

    function _basicTransfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal returns (bool) {
        _balances[sender] = _balances[sender].sub(
            amount,
            "Insufficient Balance"
        );
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
        return true;
    }

    //to recieve ETH from uniswapV2Router when swaping
    receive() external payable {}

    function transfer(
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(
                amount,
                "ERC20: transfer amount exceeds allowance"
            )
        );
        return true;
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) private returns (bool) {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "ERC20: transfer amount must greater than zero");

        require(
            tradingOpen ||
                checkExcludedFromFees[sender] ||
                checkExcludedFromFees[recipient],
            "Not Enabled"
        );

        if (inSwapAndLiquify || !swapAndLiquifyEnabled) {
            return _basicTransfer(sender, recipient, amount);
        } else {
            if (!checkTxLimitExcept[sender] && !checkTxLimitExcept[recipient]) {
                require(
                    amount <= maxTxAmount,
                    "Transfer amount exceeds the maxTxAmount."
                );
            }

            uint256 contractTokenBalance = balanceOf(address(this));
            
            bool overMinimumTokenBalance = contractTokenBalance >= minTokensToSwap;

            if (
                overMinimumTokenBalance &&
                !inSwapAndLiquify &&
                !checkExcludedFromFees[sender] &&
                checkMarketPair[recipient] &&
                amount >= minTokensToSwap &&
                swapAndLiquifyEnabled
            ) {
                if (swapAndLiquifyByLimitOnly)
                    contractTokenBalance = minTokensToSwap;
                swapAndLiquify(amount);
            }

            (uint256 finalAmount, uint256 feeAmount) = takeFees(
                sender,
                recipient,
                amount
            );

            address feeReceiver = feeAmount == amount ? sender : address(this);
            if (feeAmount > 0) {
                _balances[feeReceiver] = _balances[feeReceiver].add(feeAmount);
                emit Transfer(sender, feeReceiver, feeAmount);
            }

            _balances[sender] = _balances[sender].sub(
                amount,
                "Insufficient Balance"
            );

            if (checkWalletLimit && !checkWalletLimitExcept[recipient])
                require(balanceOf(recipient).add(finalAmount) <= maxWallet);

            _balances[recipient] = _balances[recipient].add(finalAmount);

            emit Transfer(sender, recipient, finalAmount);
            return true;
        }
    }
}