Contract Name:
DejitaruBoHiya
Contract Source Code:
File 1 of 1 : DejitaruBoHiya
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _createInitialSupply(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
}
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
* 0 before setting it to a non-zero value.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() external virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function allPairsLength() external view returns (uint256);
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);
function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
interface ITsukaBurn {
function buyAndBurn(address tokenAddress, uint256 minOut) external payable;
}
contract DejitaruBoHiya is Context, ERC20, Ownable {
using SafeERC20 for IERC20;
using Address for address;
ITsukaBurn public TsukaBurn;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
_BohiyaWallets public BohiyaWallets;
_burnData public burnData;
_buyTaxes public buyTaxes;
_sellTaxes public sellTaxes;
mapping(address => bool) public pair;
mapping (address => bool) public _isExcludedFromFees;
address private TsukaBurnToken;
uint256 private start;
uint256 private end;
bool public starting;
bool public swapping;
uint256 private maxWalletTimer;
uint256 private started;
uint256 private maxWallet;
uint256 private _supply;
// @dev All wallets are multi-sig gnosis safe's
struct _BohiyaWallets {
address payable liquidityWallet;
address payable marketingWallet;
address payable devWallet;
}
struct _burnData {
uint256 burnTimer;
uint256 burnOverTime;
uint256 lastBurnTime;
uint256 amountToBurn;
}
struct _buyTaxes {
uint256 burnTsukaFee;
uint256 liquidityFee;
uint256 devFee;
uint256 marketingFee;
uint256 burnFee;
uint256 totalBuyFees;
}
struct _sellTaxes {
uint256 burnTsukaFee;
uint256 liquidityFee;
uint256 devFee;
uint256 marketingFee;
uint256 burnFee;
uint256 totalSellFees;
}
event swapRouterUpdated(
address newRouter
);
event TsukaBuyAndBurnAddressUpdated(
address TsukaBurnAddress
);
event TsukaBurnTokenUpdated(
address TsukaBurnToken
);
event TaxesSent(
address taxWallet,
uint256 ETHAmount
);
event SwapAndLiquify(
uint256 liquidityETH,
uint256 half
);
event FeesUpdated(
uint256 BurnTsukaFee,
uint256 LiquidityFee,
uint256 DevFee,
uint256 MarketingFee,
uint256 BurnFee
);
constructor(address payable _liquidityWallet, address payable _marketingWallet, address payable _devWallet, uint256 _end, uint256 _maxWalletTimer, uint256 _burnTimer) ERC20("Dejitaru Bo-Hiya", "BOHIYA") {
TsukaBurn = ITsukaBurn(payable(address(0xCC7D61F4F12802baaA6Aa317EA858552BB6B2E6e)));
TsukaBurnToken = address(0xc5fB36dd2fb59d3B98dEfF88425a3F425Ee469eD); // Tsuka Address
uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
address _pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
pair[_pair] = true;
uniswapV2Pair = address(0);
_setBuyFees(40,20,20,20,0);
_setSellFees(100,100,100,100,0);
_supply = 1 * 10 ** 9 * 10 ** decimals();
starting = true;
started = block.timestamp;
end = _end;
maxWallet = 1 * 10 ** 7 * 10 ** decimals();
maxWalletTimer = _maxWalletTimer;
BohiyaWallets.liquidityWallet = payable(_liquidityWallet);
BohiyaWallets.marketingWallet = payable(_marketingWallet);
BohiyaWallets.devWallet = payable(_devWallet);
burnData.burnOverTime = ((_supply * 400) / 1000);
burnData.amountToBurn = burnData.burnOverTime / 10;
burnData.burnTimer = _burnTimer;
burnData.lastBurnTime = started;
_isExcludedFromFees[address(this)] = true;
_isExcludedFromFees[owner()] = true;
_createInitialSupply(owner(), ((_supply * 550) / 1000)); // 55% of total supply, 45% for initial liquidity, 10% for CEX listing
_createInitialSupply(_marketingWallet, ((_supply * 35) / 1000)); // Tokens to be sent to marketing wallet 3.5% of total supply
_createInitialSupply(_devWallet, ((_supply * 15) / 1000)); // Tokens to be sent to development wallet 1.5& of total supply
_createInitialSupply(address(this), ((_supply * 400) / 1000)); // Tokens reserved in contract to be automatically burnt over time 40% of total supply
}
receive() external payable {
}
function setBuyFees(
uint256 _burnTsukaFee,
uint256 _liquidityFee,
uint256 _devFee,
uint256 _marketingFee,
uint256 _burnFee
) external onlyOwner {
_setBuyFees(_burnTsukaFee, _liquidityFee, _devFee, _marketingFee, _burnFee);
}
function _setBuyFees(
uint256 _burnTsukaFee,
uint256 _liquidityFee,
uint256 _devFee,
uint256 _marketingFee,
uint256 _burnFee
) internal {
buyTaxes.burnTsukaFee = _burnTsukaFee;
buyTaxes.liquidityFee = _liquidityFee;
buyTaxes.devFee = _devFee;
buyTaxes.marketingFee = _marketingFee;
buyTaxes.burnFee = _burnFee;
buyTaxes.totalBuyFees = (_burnTsukaFee + _liquidityFee + _devFee + _marketingFee + _burnFee);
emit FeesUpdated(_burnTsukaFee, _liquidityFee, _devFee, _marketingFee, _burnFee);
}
function setSellFees(
uint256 _burnTsukaFee,
uint256 _liquidityFee,
uint256 _devFee,
uint256 _marketingFee,
uint256 _burnFee
) external onlyOwner {
_setSellFees(_burnTsukaFee, _liquidityFee, _devFee, _marketingFee, _burnFee);
}
function _setSellFees(
uint256 _burnTsukaFee,
uint256 _liquidityFee,
uint256 _devFee,
uint256 _marketingFee,
uint256 _burnFee
) internal {
sellTaxes.burnTsukaFee = _burnTsukaFee;
sellTaxes.liquidityFee = _liquidityFee;
sellTaxes.devFee = _devFee;
sellTaxes.marketingFee = _marketingFee;
sellTaxes.burnFee = _burnFee;
sellTaxes.totalSellFees = (_burnTsukaFee + _liquidityFee + _devFee + _marketingFee + _burnFee);
emit FeesUpdated(_burnTsukaFee, _liquidityFee, _devFee, _marketingFee, _burnFee);
}
function burn(uint256 amount) public {
_burn(msg.sender, amount * 10 ** decimals());
}
function addPair(address toPair) public onlyOwner {
require(!pair[toPair], "This pair already exists");
pair[toPair] = true;
uniswapV2Pair = toPair;
}
function uupdateRouterAddress(address _router) public onlyOwner {
require(_router != address(uniswapV2Router), "This is already the router address");
uniswapV2Router = IUniswapV2Router02(_router);
emit swapRouterUpdated(_router);
}
function updateTsukaBurnPortal(address _TsukaBurnAddress) public onlyOwner {
require(_TsukaBurnAddress != address(TsukaBurn), "This is already the address of the burn portal");
TsukaBurn = ITsukaBurn(payable(address(_TsukaBurnAddress)));
emit TsukaBuyAndBurnAddressUpdated(_TsukaBurnAddress);
}
function updateBurnToken(address _TsukaBurnToken) public onlyOwner {
require(_TsukaBurnToken != address(TsukaBurnToken), "This is already the address of the burn token");
TsukaBurnToken = _TsukaBurnToken;
emit TsukaBurnTokenUpdated(_TsukaBurnToken);
}
function burnTokensOverTime() private {
if(burnData.burnOverTime > 0) {
if(block.timestamp >= (burnData.lastBurnTime + burnData.burnTimer)) {
_burn(address(this), burnData.amountToBurn);
burnData.lastBurnTime = block.timestamp;
burnData.burnOverTime -= burnData.amountToBurn;
}
}
}
function swapTokensAtAmount() public view returns (uint256 swapAmount) {
swapAmount = totalSupply() - burnData.burnOverTime;
swapAmount *= 5;
swapAmount /= 1000;
return swapAmount;
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
burnTokensOverTime();
if(starting) {
start = block.number;
starting = false;
}
uint256 current = block.number;
if((block.timestamp < (started + maxWalletTimer)) && to != address(0) && to != uniswapV2Pair && !_isExcludedFromFees[to] && !_isExcludedFromFees[from]) {
uint256 balance = balanceOf(to);
require(balance + amount <= maxWallet, "Transfer amount exceeds maximum wallet");
}
uint256 contractTokenBalance = (balanceOf(address(this)) - burnData.burnOverTime);
bool canSwap = contractTokenBalance >= swapTokensAtAmount();
if(canSwap && !swapping && pair[to] && from != address(uniswapV2Router) && from != owner() && to != owner() && !_isExcludedFromFees[to] && !_isExcludedFromFees[from]) {
contractTokenBalance = swapTokensAtAmount();
contractTokenBalance -= (((contractTokenBalance * sellTaxes.liquidityFee) / sellTaxes.totalSellFees) / 2);
contractTokenBalance -= ((contractTokenBalance * sellTaxes.burnFee) / sellTaxes.totalSellFees);
swapping = true;
if (sellTaxes.totalSellFees > 0) {
swapTokensForEth(contractTokenBalance);
if(sellTaxes.burnFee > 0) {
uint256 burnAmount = ((swapTokensAtAmount() * sellTaxes.burnFee) / sellTaxes.totalSellFees);
_burn(address(this), burnAmount);
}
if (sellTaxes.liquidityFee > 0) {
uint256 liquidityETH = ((address(this).balance * sellTaxes.liquidityFee) / sellTaxes.totalSellFees);
// add liquidity to uniswap
addLiquidity((((swapTokensAtAmount() * sellTaxes.liquidityFee) / sellTaxes.totalSellFees) / 2), liquidityETH);
emit SwapAndLiquify(liquidityETH, (((swapTokensAtAmount() * sellTaxes.liquidityFee) / sellTaxes.totalSellFees) / 2));
}
if (sellTaxes.burnTsukaFee > 0) {
uint256 TsukaETH = ((address(this).balance * sellTaxes.burnTsukaFee) / sellTaxes.totalSellFees);
TsukaBurn.buyAndBurn{value: TsukaETH}(TsukaBurnToken, 0);
}
if (sellTaxes.devFee > 0) {
uint256 devAmount = ((address(this).balance * sellTaxes.devFee) / sellTaxes.totalSellFees);
(bool success, ) = address(BohiyaWallets.devWallet).call{value: devAmount}("");
require(success, "Failed to send dev fee");
emit TaxesSent(address(BohiyaWallets.devWallet), devAmount);
}
if (sellTaxes.marketingFee > 0) {
uint256 marketingAmount = address(this).balance;
(bool success, ) = address(BohiyaWallets.marketingWallet).call{value: marketingAmount}("");
require(success, "Failed to send marketing fee");
emit TaxesSent(address(BohiyaWallets.marketingWallet), marketingAmount);
}
}
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
super._transfer(from, to, amount);
}
else if(current <= start + end && from != owner() && to != owner()) {
uint256 send = (amount * 10) / 1000;
amount -= send;
super._transfer(from, to, send);
super._transfer(from, address(this), amount);
_burn(address(this), amount);
}
else if(!pair[to] && !pair[from] && !_isExcludedFromFees[from] && !_isExcludedFromFees[to]) {
takeFee = false;
super._transfer(from, to, amount);
}
if(takeFee) {
uint256 BuyFees = ((amount * buyTaxes.totalBuyFees) / 1000);
uint256 SellFees = ((amount * sellTaxes.totalSellFees) / 1000);
// if sell
if(pair[to] && sellTaxes.totalSellFees > 0) {
amount -= SellFees;
super._transfer(from, address(this), SellFees);
super._transfer(from, to, amount);
}
// if buy transfer
else if(pair[from] && buyTaxes.totalBuyFees > 0) {
amount -= BuyFees;
if(buyTaxes.burnFee > 0) {
uint256 burnAmount = ((BuyFees * buyTaxes.burnFee) / buyTaxes.totalBuyFees);
BuyFees -= burnAmount;
_burn(address(this), burnAmount);
}
super._transfer(from, address(this), BuyFees);
super._transfer(from, to, amount);
}
else {
super._transfer(from, to, amount);
}
}
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(BohiyaWallets.liquidityWallet),
block.timestamp
);
}
}