Contract Source Code:

pragma solidity ^0.4.11;

/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale.
 * Crowdsales have a start and end timestamps, where investors can make
 * token purchases and the crowdsale will assign them tokens based
 * on a token per ETH rate. Funds collected are forwarded to a wallet
 * as they arrive.
 */
 
 
library SafeMath {
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a * b;
    assert(a == 0 || c / a == b);
    return c;
  }

 function div(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b > 0); // Solidity automatically throws when dividing by 0
    uint256 c = a / b;
    assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return c;
  }

  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    assert(c >= a);
    return c;
  }
}

contract Ownable {
  address public owner;


  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  function Ownable() public {
    owner = msg.sender;
  }


  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }


  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) onlyOwner public {
    require(newOwner != address(0));
    OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }
}

/**
 * @title ERC20Standard
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Interface {
     function totalSupply() public constant returns (uint);
     function balanceOf(address tokenOwner) public constant returns (uint balance);
     function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
     function transfer(address to, uint tokens) public returns (bool success);
     function approve(address spender, uint tokens) public returns (bool success);
     function transferFrom(address from, address to, uint tokens) public returns (bool success);
     event Transfer(address indexed from, address indexed to, uint tokens);
     event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract EtheeraToken is ERC20Interface,Ownable {

    using SafeMath for uint256;
   
    mapping(address => uint256) tokenBalances;
    mapping (address => mapping (address => uint256)) allowed;
    uint256 public totalSupply;

    string public constant name = "ETHEERA";
    string public constant symbol = "ETA";
    uint256 public constant decimals = 18;

   uint256 public constant INITIAL_SUPPLY = 75000000000;

  /**
  * @dev transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(tokenBalances[msg.sender]>=_value);
    tokenBalances[msg.sender] = tokenBalances[msg.sender].sub(_value);
    tokenBalances[_to] = tokenBalances[_to].add(_value);
    Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) constant public returns (uint256 balance) {
    return tokenBalances[_owner];
  }
  
  
     /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= tokenBalances[_from]);
    require(_value <= allowed[_from][msg.sender]);

    tokenBalances[_from] = tokenBalances[_from].sub(_value);
    tokenBalances[_to] = tokenBalances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    Transfer(_from, _to, _value);
    return true;
  }
  
     /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   *
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    Approval(msg.sender, _spender, _value);
    return true;
  }

     // ------------------------------------------------------------------------
     // Total supply
     // ------------------------------------------------------------------------
     function totalSupply() public constant returns (uint) {
         return totalSupply  - tokenBalances[address(0)];
     }
     
    
     
     // ------------------------------------------------------------------------
     // Returns the amount of tokens approved by the owner that can be
     // transferred to the spender's account
     // ------------------------------------------------------------------------
     function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
         return allowed[tokenOwner][spender];
     }
     
     /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   *
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
    allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   *
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
    uint oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

     
     // ------------------------------------------------------------------------
     // Don't accept ETH
     // ------------------------------------------------------------------------
     function () public payable {
         revert();
     }   


  
   event Debug(string message, address addr, uint256 number);
   /**
   * @dev Contructor that gives msg.sender all of existing tokens.
   */
    function EtheeraToken(address wallet) public {
        owner = msg.sender;
        totalSupply = INITIAL_SUPPLY * 10 ** 18;
        tokenBalances[wallet] = totalSupply;   //Since we divided the token into 10^18 parts
    }

    function mint(address wallet, address buyer, uint256 tokenAmount) public onlyOwner {
      require(tokenBalances[wallet] >= tokenAmount);               // checks if it has enough to sell
      tokenBalances[buyer] = tokenBalances[buyer].add(tokenAmount);                  // adds the amount to buyer's balance
      tokenBalances[wallet] = tokenBalances[wallet].sub(tokenAmount);                        // subtracts amount from seller's balance
      Transfer(wallet, buyer, tokenAmount); 
      totalSupply = totalSupply.sub(tokenAmount); 
    }
    
   
}