Contract Name:
EmptyBunnies
Contract Source Code:
File 1 of 1 : EmptyBunnies
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
////// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [////IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* ////IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "./IERC721.sol";
////import "./IERC721Receiver.sol";
////import "./extensions/IERC721Metadata.sol";
////import "../../utils/Address.sol";
////import "../../utils/Context.sol";
////import "../../utils/Strings.sol";
////import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
external
view
returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../ERC721.sol";
////import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721Burnable: caller is not owner nor approved"
);
_burn(tokenId);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../utils/Address.sol";
////import "../utils/Context.sol";
////import "../utils/math/SafeMath.sol";
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*/
contract PaymentSplitter is Context {
event PayeeAdded(address account, uint256 shares);
event PaymentReleased(address to, uint256 amount);
event PaymentReceived(address from, uint256 amount);
uint256 private _totalShares;
uint256 private _totalReleased;
mapping(address => uint256) private _shares;
mapping(address => uint256) private _released;
address[] private _payees;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/
constructor(address[] memory payees, uint256[] memory shares_) payable {
require(
payees.length == shares_.length,
"PaymentSplitter: payees and shares length mismatch"
);
require(payees.length > 0, "PaymentSplitter: no payees");
for (uint256 i = 0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/
receive() external payable virtual {
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/
function totalShares() public view returns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/
function totalReleased() public view returns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the amount of shares held by an account.
*/
function shares(address account) public view returns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/
function released(address account) public view returns (uint256) {
return _released[account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/
function payee(uint256 index) public view returns (address) {
return _payees[index];
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/
function release(address payable account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 totalReceived = address(this).balance + _totalReleased;
uint256 payment = (totalReceived * _shares[account]) /
_totalShares -
_released[account];
require(payment != 0, "PaymentSplitter: account is not due payment");
_released[account] = _released[account] + payment;
_totalReleased = _totalReleased + payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/
function _addPayee(address account, uint256 shares_) private {
require(
account != address(0),
"PaymentSplitter: account is the zero address"
);
require(shares_ > 0, "PaymentSplitter: shares are 0");
require(
_shares[account] == 0,
"PaymentSplitter: account already has shares"
);
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
pragma solidity ^0.8.0;
////import "../ERC721.sol";
////import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721)
returns (bool)
{
return
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721.balanceOf(owner),
"ERC721Enumerable: owner index out of bounds"
);
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(
index < ERC721Enumerable.totalSupply(),
"ERC721Enumerable: global index out of bounds"
);
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId)
private
{
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
/**
* SourceUnit: d:\repos\NFTurbo\contracts\emptybunnies\emptybunnies.sol
*/
//
// * ( ) ) ) ( (
// ( ` )\ ) * ) ( /( ( ( /( ( /( )\ ) )\ )
// ( )\))( (()/(` ) /( )\()) ( )\ ( )\()) )\())(()/( ( (()/(
// )\ ((_)()\ /(_))( )(_))((_)\ )((_) )\ ((_)\ ((_)\ /(_)))\ /(_))
// ((_) (_()((_)(_)) (_(_())__ ((_) ((_)_ _ ((_) _((_) _((_)(_)) ((_) (_))
// | __|| \/ || _ \|_ _|\ \ / / | _ )| | | || \| || \| ||_ _|| __|/ __|
// | _| | |\/| || _/ | | \ V / | _ \| |_| || .` || .` | | | | _| \__ \
// |___)|_( |_||_| |_| |_| |___/ \___/ |_|\_||_|\_||___||___||___/
//
// ( /( )\ ) * )
// )\())(()/( ` ) /(
// ((_)\ /(_)) ( )(_))
// _((_)(_))_|(_(_())
// | \| || |_ |_ _|
// | .` || __| | |
// |_|\_||_| |_|
//
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOOkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxk0KXNWWXOkO00KKKXKOxxxxxxxxxxxxxxxxxxxxoc;cdxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOKXNNXOdxXWXKK0Okkxx0Kkxxxxxxxxxxxxxxxdoc;,'.,oxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxOKNNKOdc:;oOkdocc:;:lxKX0kxxxxxxxxxxxxdc;,''',''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkkkOOOOOOKNNOlc:cc;;cc:ccccokKXXK0XKkxxxxxxxxxdc,'''..''''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkkOKKXK0Okxddxxko:ccccc::cccc;,:odolc:cOXkxxxxxxxxo;.'.....''''lxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkOKXXKOxoc;;,'....';:::::ccc::::;;;::cc:ckNXOkxxxxxxd:......''''.,oxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxO00Odc;,''','..',;:cllccc:::clooddooolc:',oOXNX0kxxxxd;......''''':dxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdl:,,,;,'..................'''''''',;::;,,;;;,'...;oOOOxdddd;.....''..'cdxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxxxdl;'...............'''''''''''''''';:c::;;:,...........',,,,;;'.......':oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxxdl;..'''''......'..''''''''''',,,,,;cc:cc::,;:::,''''''''''''''... .....'cdxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxxd:'.'''''''''''''''''''''''''''clc::cc;,;:::::;;c:,,,,,,,''''''''....'''..';lxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxxd;...'''''''''...''''....''''''',cc;;::::''';l:;:c;'''',,,,,''''......'''','.;dxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxxd:................................';;:c:;:::,;ll:;,'''''',,,,,,,''......'''''.;dxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxxxkl..........''.';::cc:'........,clcccccclllllcc:,'........'''''''''...........'lxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxxx00c..'',,'';::;;okOOOko;,''.....,oOOOOOOOOOOOkkkxd;................'''.........:xxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxxk0NXc';:cc;;ccc:;lllxOkl;,'........,dOOOOOOOOOOOOOOl.........''';:,.............;oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxxkKWNx::ccc;;cccc;cl;:xkl,,,..........ckOOOOOOOOOOOOx,.........',,:dkl,.'.......':oxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxxkKWNx:cccc;;:lcc::oodkOo;,,...........,xOOOOOOOOOOOOl...........';,:xOxoo;. ...'cdxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxxk0NNd:cccc;;:cccc;cdxOOx;,;'...........'oOOOOOOOOOOOk:............,;,lkOkd:......':oxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxxx0NNx:cccc;,:cccc:;okOOOl,;,.............lOOOOOOOOOOOk;.............;,;dOOko........;oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxx0NWk::ccc;';ccccc,:xOOOx;,;'.............lOOOOOOOOOOOx;.............';,cOOOkc.......'cxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxxOXWOc:ccc;',ccccc:':kOOOo,;,.............'lOOOOOOOOOOOk:.............';,:xOOOd'......'lxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxxkKWKl:ccc;',:ccccc;.:kOOkc,;'.............'oOOOOOOOOOOOk:..............,;;dOOOdcc:..'.,oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxx0NNd:ccc:,,;cccccc;.ckOOk:,;'.............,xOOOOOOOOOOOOl..............,;;lOOOdo0Ko,'.,oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxxOXWOc:cc:,,;:cccccc;':kOOx:;;..............:kOOOOOOOOOOOOd,.............';;lOOOddXXOdl;:oxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxk0NXo:ccc;;;;ccccccc;,:xOOx:;,.............'oOOOOOOOOOOOOOk:.............';;lOOOoxXKkxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxxOXWk::cc;;;;:ccccccc;,;oOOx:,,.............;xOOOOOOOOOOOOOOo'............';;lOOkoOXOxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxx0NXo:cc:;;;;cccccccc;;;ckOk:,,............'oOOOOOOOOOOOOOOOk:............',,lOOdd00kxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxkKW0c:cc:;:;;cccccccc;;:;oOkc,,'...........ckOOOOOxcoxllkOOOOd,...........',;dOkokKkxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxOXWx:ccc;;:;;cccccccc;:c::xOd;,'..........:xOOOOxo:,ox:,lkOOOOo,..........,,ckOdd0Oxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxx0NNo:cc:;::;:ccccccc:;:cc;ckkl,'.........:xOOOOkc,,;oxc,;oOOOOOo,........',;dOddOOxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxk0WKl:cc:;::;:ccccccc:;:ccc;lkxc''......'ckOOOOOkxdlcdkocokOOOOOOd;.......',okxdkOkxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkKWO::cc:;c:;:ccccccc:;ccccc:lkxc,....':dOOOOOOOOOOOOOOOOOOOOOOOOOkl,....';okxdOOkxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk::cc::c:;:ccccccc::c:;:cc:lxkxolloxkOkxxkOOOOOOOOOOOOOOOOOOkxkOOkdlcldkkxdOOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk:ccc::c:;:ccccccc:::,',:cc;cddodxxkkkkxxkOOOOOOOOOOOOOOOOOOkxxkkkxxdddxddkkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWk::cc:cc:;:ccccc:;::,.',;::lOOdc,,:ccc:cdkkOkxkkdxkkkdxkxkkkko:ccc;,;okOkkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkXWO::cccccc;;ccc:,;:;;'.,;;;l0KkkOxl:;::;;cc:lc;cl::loc;c::lc:l:,,;;cd0XKOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxkKWXl:cccccc:;:c:;,',;,';:c:l0XOxxxkOkdl:,,:::::::::::c:::::;::c;,:dOKK0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxx0NNx:cccccc:,;:::,'''',:c:l0XOxxxxxxkO0klccc:cl;:loloxool;cl::cloOXKOkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxOXW0c:cccc::c::c::;;,,:c:dKXOxxxxxxxxxxdldxo:ldl:clddddoc:odccdxloxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// dxxxxxxxxxxkKWNd:ccc:lOXx:cc::cc;;ckKKkxxxxxxxxxxxk0KOxolc:,,;:::;'',coxO0Okxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxOXWKl;coOXNWXd:cccc::d0KOxxxxxxxxxxxk0NW0oc:::;'',:c:,''.,:coKWN0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxOXWKOKNXKO0NXxc:clxO0OkxxxxxxxxxxxOXWNOc:cccc:;;;;;,,'',:cc:cOWWKkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxk0KK0Okxxk0XNKO000Oxxxxxxxxxxxxk0NMNxc:c::cc,;llc;;'.'::::c:ckNWXOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxkO00OkxxxxxxxxxxxxxkKWMXd:cc:,,;,':olc;;;,,;:,,:cc:dXWNOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx0WWKl:ccc;';;,;,..,:lc;,:c;':ccc:oKWXkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdx0WW0l:ccc;,::,;;'..,cccllc:,;ccc:l0WNOxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkKWWKo;;:;;ccc:;,,;:cclccc:;;:;;oKWN0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxkKWMNd;:;,;cccccccccccccccc;,;::xNWXkxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxONWNOc:c;,;:::::::::::::::::,:c:cON0kxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxOKKOxooolcllllllllllllllllllccllcdkxdxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
//
// ╔═╗╔╦╗╔═╗╦═╗╔╦╗ ╔═╗╔═╗╔╗╔╔╦╗╦═╗╔═╗╔═╗╔╦╗ ╔═╗╦═╗╔═╗╦ ╦╦╔╦╗╔═╗╔╦╗ ╔╗ ╦ ╦
// ╚═╗║║║╠═╣╠╦╝ ║ ║ ║ ║║║║ ║ ╠╦╝╠═╣║ ║ ╠═╝╠╦╝║ ║╚╗╔╝║ ║║║╣ ║║ ╠╩╗╚╦╝
// ╚═╝╩ ╩╩ ╩╩╚═ ╩ ╚═╝╚═╝╝╚╝ ╩ ╩╚═╩ ╩╚═╝ ╩ ╩ ╩╚═╚═╝ ╚╝ ╩═╩╝╚═╝═╩╝ ╚═╝ ╩ooo
//
// ╔╗╔╔═╗╔╦╗╦ ╦╦═╗╔╗ ╔═╗ ╔═╗╦═╗╦ ╦╔═╗╔╦╗╔═╗ ╔═╗╦═╗╔╦╗╦╔═╗╔╦╗╔═╗ ╔═╗╔═╗╔═╗╔╗╔╔═╗╦ ╦
// ║║║╠╣ ║ ║ ║╠╦╝╠╩╗║ ║ ║ ╠╦╝╚╦╝╠═╝ ║ ║ ║ ╠═╣╠╦╝ ║ ║╚═╗ ║ ╚═╗ ╠═╣║ ╦║╣ ║║║║ ╚╦╝
// ╝╚╝╚ ╩ ╚═╝╩╚═╚═╝╚═╝ ╚═╝╩╚═ ╩ ╩ ╩ ╚═╝ ╩ ╩╩╚═ ╩ ╩╚═╝ ╩ ╚═╝ ╩ ╩╚═╝╚═╝╝╚╝╚═╝ ╩
//
// ╔╗╔╔═╗╔╦╗╦ ╦╦═╗╔╗ ╔═╗ ╦╔═╗
// ─── ║║║╠╣ ║ ║ ║╠╦╝╠╩╗║ ║ ║║ ║ ───
// ╝╚╝╚ ╩ ╚═╝╩╚═╚═╝╚═╝ o ╩╚═╝
pragma solidity 0.8.7;
////import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
////import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
////import "@openzeppelin/contracts/access/Ownable.sol";
////import "@openzeppelin/contracts/finance/PaymentSplitter.sol";
////import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol";
contract EmptyBunnies is
ERC721Enumerable,
ERC721Burnable,
ReentrancyGuard,
Ownable,
PaymentSplitter
{
// Sale begins:
// GMT: Tuesday, October 19, 2021 1:30:00 AM
// Monday, October 18, 2021 6:30:00 PM GMT-07:00
uint256 public saleTime = 1634607000;
uint256 public price = 40000000000000000;
uint256 public supplyCap = 6000;
uint256 public perTxLimit = 20;
uint256 public reservedMints = 35;
uint256 private tokenCounter = 0;
uint256[] private _teamShares = [36, 50, 13, 1];
string public provenanceHash = "";
string private baseTokenURI = "";
address[] private _team = [
0xa0260d525e841D5FbA772D69860dF59713992E95,
0x23D4AA98cb89166D8d5043CA6E8d0aE0B7f70495,
0x3097617CbA85A26AdC214A1F87B680bE4b275cD0,
0x14679b51D4043B5C2BD16E83b26bFC4F662d8Bfa
];
constructor(string memory _baseTokenURI)
payable
PaymentSplitter(_team, _teamShares)
ERC721("Empty Bunnies NFT", "BUNS")
{
baseTokenURI = _baseTokenURI;
}
// Method which is used to mint during the standard minting window
function mint(uint256 _amountMinted, address _recipient)
public
payable
nonReentrant
{
if (owner() != _msgSender()) {
require(
saleTime != 0 && saleTime <= block.timestamp,
"ERC721: Sale is paused..."
);
}
require(totalSupply() < supplyCap, "ERC721: Sale is finished.");
require(
_amountMinted > 0 && _amountMinted <= perTxLimit,
"ERC721: You may only mint up to 20 Empty Buns."
);
require(
totalSupply() + _amountMinted < supplyCap,
"ERC721: Transaction would exceed supply cap."
);
require(
msg.value >= getTokenPrice(true) * _amountMinted,
"ERC721: Incorrect value sent."
);
// Prevent nefarious contracts from bypassing limits
require(
tx.origin == _msgSender(),
"ERC721: The caller is another contract."
);
for (uint256 i = 0; i < _amountMinted; i++) {
_safeMint(_recipient, tokenCounter);
tokenCounter++;
}
}
// Setters-----------------------------
// Owner only method which sets token price
function setSaleTime(uint256 _saleTime) external onlyOwner {
saleTime = _saleTime;
}
// Owner only method which sets provenance hash
function setProvenanceHash(string memory _provenanceHash) public onlyOwner {
provenanceHash = _provenanceHash;
}
// Owner only method which sets token price
function setTokenPrice(uint256 _price) public onlyOwner {
price = _price;
}
// Owner only method which sets baseUri
function setBaseURI(string memory baseURI) public onlyOwner {
baseTokenURI = baseURI;
}
// Owner only method which sets baseUri
function setReservedMints(uint256 _reservedMints) public onlyOwner {
reservedMints = _reservedMints;
}
// Public method which retrieves token price
function getTokenPrice(bool showFree) public view returns (uint256) {
if (!showFree) {
return price;
}
if (totalSupply() < reservedMints) {
return 0;
}
return price;
}
// Public method which retrieves holders inventory of tokens
function getHoldersTokens(address _holder)
public
view
returns (uint256[] memory)
{
uint256 tokenCount = balanceOf(_holder);
uint256[] memory tokensId = new uint256[](tokenCount);
for (uint256 i; i < tokenCount; i++) {
tokensId[i] = tokenOfOwnerByIndex(_holder, i);
}
return tokensId;
}
// ----------- Overrides to satisfy openzeppelin ERC721 dependencies:
function _baseURI() internal view virtual override returns (string memory) {
return baseTokenURI;
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) {
super._beforeTokenTransfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}