Contract Source Code:
// SPDX-License-Identifier: MIT
// solhint-disable no-inline-assembly
pragma solidity >=0.6.9;
import "./interfaces/IRelayRecipient.sol";
/**
* A base contract to be inherited by any contract that want to receive relayed transactions
* A subclass must use "_msgSender()" instead of "msg.sender"
*/
abstract contract BaseRelayRecipient is IRelayRecipient {
/*
* Forwarder singleton we accept calls from
*/
address private _trustedForwarder;
function trustedForwarder() public virtual view returns (address){
return _trustedForwarder;
}
function _setTrustedForwarder(address _forwarder) internal {
_trustedForwarder = _forwarder;
}
function isTrustedForwarder(address forwarder) public virtual override view returns(bool) {
return forwarder == _trustedForwarder;
}
/**
* return the sender of this call.
* if the call came through our trusted forwarder, return the original sender.
* otherwise, return `msg.sender`.
* should be used in the contract anywhere instead of msg.sender
*/
function _msgSender() internal override virtual view returns (address ret) {
if (msg.data.length >= 20 && isTrustedForwarder(msg.sender)) {
// At this point we know that the sender is a trusted forwarder,
// so we trust that the last bytes of msg.data are the verified sender address.
// extract sender address from the end of msg.data
assembly {
ret := shr(96,calldataload(sub(calldatasize(),20)))
}
} else {
ret = msg.sender;
}
}
/**
* return the msg.data of this call.
* if the call came through our trusted forwarder, then the real sender was appended as the last 20 bytes
* of the msg.data - so this method will strip those 20 bytes off.
* otherwise (if the call was made directly and not through the forwarder), return `msg.data`
* should be used in the contract instead of msg.data, where this difference matters.
*/
function _msgData() internal override virtual view returns (bytes calldata ret) {
if (msg.data.length >= 20 && isTrustedForwarder(msg.sender)) {
return msg.data[0:msg.data.length-20];
} else {
return msg.data;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0;
/**
* a contract must implement this interface in order to support relayed transaction.
* It is better to inherit the BaseRelayRecipient as its implementation.
*/
abstract contract IRelayRecipient {
/**
* return if the forwarder is trusted to forward relayed transactions to us.
* the forwarder is required to verify the sender's signature, and verify
* the call is not a replay.
*/
function isTrustedForwarder(address forwarder) public virtual view returns(bool);
/**
* return the sender of this call.
* if the call came through our trusted forwarder, then the real sender is appended as the last 20 bytes
* of the msg.data.
* otherwise, return `msg.sender`
* should be used in the contract anywhere instead of msg.sender
*/
function _msgSender() internal virtual view returns (address);
/**
* return the msg.data of this call.
* if the call came through our trusted forwarder, then the real sender was appended as the last 20 bytes
* of the msg.data - so this method will strip those 20 bytes off.
* otherwise (if the call was made directly and not through the forwarder), return `msg.data`
* should be used in the contract instead of msg.data, where this difference matters.
*/
function _msgData() internal virtual view returns (bytes calldata);
function versionRecipient() external virtual view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @notice Contract that enables a single call to call multiple methods on itself.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/Multicallable.sol)
/// @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/Multicallable.sol)
/// @dev WARNING!
/// Multicallable is NOT SAFE for use in contracts with checks / requires on `msg.value`
/// (e.g. in NFT minting / auction contracts) without a suitable nonce mechanism.
/// It WILL open up your contract to double-spend vulnerabilities / exploits.
/// See: (https://www.paradigm.xyz/2021/08/two-rights-might-make-a-wrong/)
abstract contract Multicallable {
function multicall(bytes[] calldata data) public payable returns (bytes[] memory results) {
assembly {
if data.length {
results := mload(0x40) // Point `results` to start of free memory.
mstore(results, data.length) // Store `data.length` into `results`.
results := add(results, 0x20)
// `shl` 5 is equivalent to multiplying by 0x20.
let end := shl(5, data.length)
// Copy the offsets from calldata into memory.
calldatacopy(results, data.offset, end)
// Pointer to the top of the memory (i.e. start of the free memory).
let memPtr := add(results, end)
end := add(results, end)
// prettier-ignore
for {} 1 {} {
// The offset of the current bytes in the calldata.
let o := add(data.offset, mload(results))
// Copy the current bytes from calldata to the memory.
calldatacopy(
memPtr,
add(o, 0x20), // The offset of the current bytes' bytes.
calldataload(o) // The length of the current bytes.
)
if iszero(delegatecall(gas(), address(), memPtr, calldataload(o), 0x00, 0x00)) {
// Bubble up the revert if the delegatecall reverts.
returndatacopy(0x00, 0x00, returndatasize())
revert(0x00, returndatasize())
}
// Append the current `memPtr` into `results`.
mstore(results, memPtr)
results := add(results, 0x20)
// Append the `returndatasize()`, and the return data.
mstore(memPtr, returndatasize())
returndatacopy(add(memPtr, 0x20), 0x00, returndatasize())
// Advance the `memPtr` by `returndatasize() + 0x20`,
// rounded up to the next multiple of 32.
memPtr := and(add(add(memPtr, returndatasize()), 0x3f), 0xffffffffffffffe0)
// prettier-ignore
if iszero(lt(results, end)) { break }
}
// Restore `results` and allocate memory for it.
results := mload(0x40)
mstore(0x40, memPtr)
}
}
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
/*//////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
/*//////////////////////////////////////////////////////////////
METADATA STORAGE
//////////////////////////////////////////////////////////////*/
string public name;
string public symbol;
uint8 public immutable decimals;
/*//////////////////////////////////////////////////////////////
ERC20 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/*//////////////////////////////////////////////////////////////
EIP-2612 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 internal immutable INITIAL_CHAIN_ID;
bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;
mapping(address => uint256) public nonces;
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
INITIAL_CHAIN_ID = block.chainid;
INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
}
/*//////////////////////////////////////////////////////////////
ERC20 LOGIC
//////////////////////////////////////////////////////////////*/
function approve(address spender, uint256 amount) public virtual returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address to, uint256 amount) public virtual returns (bool) {
balanceOf[msg.sender] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(msg.sender, to, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.
if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;
balanceOf[from] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(from, to, amount);
return true;
}
/*//////////////////////////////////////////////////////////////
EIP-2612 LOGIC
//////////////////////////////////////////////////////////////*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");
// Unchecked because the only math done is incrementing
// the owner's nonce which cannot realistically overflow.
unchecked {
address recoveredAddress = ecrecover(
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR(),
keccak256(
abi.encode(
keccak256(
"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
),
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
),
v,
r,
s
);
require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");
allowance[recoveredAddress][spender] = value;
}
emit Approval(owner, spender, value);
}
function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
}
function computeDomainSeparator() internal view virtual returns (bytes32) {
return
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name)),
keccak256("1"),
block.chainid,
address(this)
)
);
}
/*//////////////////////////////////////////////////////////////
INTERNAL MINT/BURN LOGIC
//////////////////////////////////////////////////////////////*/
function _mint(address to, uint256 amount) internal virtual {
totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
balanceOf[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "../tokens/ERC20.sol";
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
/*//////////////////////////////////////////////////////////////
ETH OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferETH(address to, uint256 amount) internal {
bool success;
assembly {
// Transfer the ETH and store if it succeeded or not.
success := call(gas(), to, amount, 0, 0, 0, 0)
}
require(success, "ETH_TRANSFER_FAILED");
}
/*//////////////////////////////////////////////////////////////
ERC20 OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
)
}
require(success, "TRANSFER_FROM_FAILED");
}
function safeTransfer(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "TRANSFER_FAILED");
}
function safeApprove(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "APPROVE_FAILED");
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.16;
/// @author Open Zeppelin
interface IERC4626 {
event Deposit(address indexed caller, address indexed owner, uint256 assets, uint256 shares);
event Withdraw(
address indexed caller, address indexed receiver, address indexed owner, uint256 assets, uint256 shares
);
/**
* @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
*
* - MUST be an ERC-20 token contract.
* - MUST NOT revert.
*/
function asset() external view returns (address assetTokenAddress);
/**
* @dev Returns the total amount of the underlying asset that is “managed” by Vault.
*
* - SHOULD include any compounding that occurs from yield.
* - MUST be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT revert.
*/
function totalAssets() external view returns (uint256 totalManagedAssets);
/**
* @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
* scenario where all the conditions are met.
*
* - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT show any variations depending on the caller.
* - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
* - MUST NOT revert.
*
* NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
* “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
* from.
*/
function convertToShares(uint256 assets) external view returns (uint256 shares);
/**
* @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
* scenario where all the conditions are met.
*
* - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT show any variations depending on the caller.
* - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
* - MUST NOT revert.
*
* NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
* “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
* from.
*/
function convertToAssets(uint256 shares) external view returns (uint256 assets);
/**
* @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
* through a deposit call.
*
* - MUST return a limited value if receiver is subject to some deposit limit.
* - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
* - MUST NOT revert.
*/
function maxDeposit(address receiver) external view returns (uint256 maxAssets);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
* current on-chain conditions.
*
* - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
* call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
* in the same transaction.
* - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
* deposit would be accepted, regardless if the user has enough tokens approved, etc.
* - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewDeposit(uint256 assets) external view returns (uint256 shares);
/**
* @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
*
* - MUST emit the Deposit event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* deposit execution, and are accounted for during deposit.
* - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
*/
function deposit(uint256 assets, address receiver) external returns (uint256 shares);
/**
* @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
* - MUST return a limited value if receiver is subject to some mint limit.
* - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
* - MUST NOT revert.
*/
function maxMint(address receiver) external view returns (uint256 maxShares);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
* current on-chain conditions.
*
* - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
* in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
* same transaction.
* - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
* would be accepted, regardless if the user has enough tokens approved, etc.
* - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by minting.
*/
function previewMint(uint256 shares) external view returns (uint256 assets);
/**
* @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
*
* - MUST emit the Deposit event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
* execution, and are accounted for during mint.
* - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
*/
function mint(uint256 shares, address receiver) external returns (uint256 assets);
/**
* @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
* Vault, through a withdraw call.
*
* - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
* - MUST NOT revert.
*/
function maxWithdraw(address owner) external view returns (uint256 maxAssets);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
* given current on-chain conditions.
*
* - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
* call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
* called
* in the same transaction.
* - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
* the withdrawal would be accepted, regardless if the user has enough shares, etc.
* - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewWithdraw(uint256 assets) external view returns (uint256 shares);
/**
* @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
*
* - MUST emit the Withdraw event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* withdraw execution, and are accounted for during withdraw.
* - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);
/**
* @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
* through a redeem call.
*
* - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
* - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
* - MUST NOT revert.
*/
function maxRedeem(address owner) external view returns (uint256 maxShares);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
* given current on-chain conditions.
*
* - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
* in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
* same transaction.
* - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
* redemption would be accepted, regardless if the user has enough shares, etc.
* - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by redeeming.
*/
function previewRedeem(uint256 shares) external view returns (uint256 assets);
/**
* @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
*
* - MUST emit the Withdraw event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* redeem execution, and are accounted for during redeem.
* - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.16;
interface IWETH {
function deposit() external payable;
function transfer(address to, uint256 value) external returns (bool);
function withdraw(uint256) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.16;
import {ERC4626RouterBase, SafeTransferLib, ERC20, IERC4626} from "./ERC4626RouterBase.sol";
/// @title ERC4626Router contract
contract ERC4626Router is ERC4626RouterBase {
using SafeTransferLib for ERC20;
constructor(string memory name) {}
function depositToVault(IERC4626 vault, address to, uint256 amount, uint256 minSharesOut)
external
payable
returns (uint256 sharesOut)
{
ERC20(vault.asset()).safeTransferFrom(_msgSender(), address(this), amount);
return deposit(vault, to, amount, minSharesOut);
}
function withdrawToDeposit(
IERC4626 fromVault,
IERC4626 toVault,
address to,
uint256 amount,
uint256 maxSharesIn,
uint256 minSharesOut
) external payable returns (uint256 sharesOut) {
withdraw(fromVault, address(this), amount, maxSharesIn);
return deposit(toVault, to, amount, minSharesOut);
}
function redeemToDeposit(IERC4626 fromVault, IERC4626 toVault, address to, uint256 shares, uint256 minSharesOut)
external
payable
returns (uint256 sharesOut)
{
uint256 amount = redeem(fromVault, address(this), shares, 0);
return deposit(toVault, to, amount, minSharesOut);
}
function depositMax(IERC4626 vault, address to, uint256 minSharesOut) public payable returns (uint256 sharesOut) {
ERC20 asset = ERC20(vault.asset());
uint256 assetBalance = asset.balanceOf(_msgSender());
uint256 maxDeposit = vault.maxDeposit(to);
uint256 amount = maxDeposit < assetBalance ? maxDeposit : assetBalance;
ERC20(vault.asset()).safeTransferFrom(_msgSender(), address(this), amount);
return deposit(vault, to, amount, minSharesOut);
}
function redeemMax(IERC4626 vault, address to, uint256 minAmountOut) public payable returns (uint256 amountOut) {
uint256 shareBalance = ERC20(address(vault)).balanceOf(_msgSender());
uint256 maxRedeem = vault.maxRedeem(_msgSender());
uint256 amountShares = maxRedeem < shareBalance ? maxRedeem : shareBalance;
return redeem(vault, to, amountShares, minAmountOut);
}
function approve(ERC20 token, address to, uint256 amount) public payable {
token.safeApprove(to, amount);
}
function versionRecipient() external view virtual override returns (string memory) {
return "1";
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.16;
import {ERC20} from "solmate/src/tokens/ERC20.sol";
import {SafeTransferLib} from "solmate/src/utils/SafeTransferLib.sol";
import {IERC4626} from "src/interfaces/IERC4626.sol";
import {Multicallable} from "solady/src/utils/Multicallable.sol";
import {BaseRelayRecipient} from "@opengsn/contracts/src/BaseRelayRecipient.sol";
/// @title ERC4626 Router Base Contract
abstract contract ERC4626RouterBase is Multicallable, BaseRelayRecipient {
using SafeTransferLib for ERC20;
error MinAmountError();
/// @notice thrown when amount of shares received is below the min set by caller
error MinSharesError();
/// @notice thrown when amount of assets received is above the max set by caller
error MaxAmountError();
/// @notice thrown when amount of shares received is above the max set by caller
error MaxSharesError();
function mint(IERC4626 vault, address to, uint256 shares, uint256 maxAmountIn)
public
payable
virtual
returns (uint256 amountIn)
{
if ((amountIn = vault.mint(shares, to)) > maxAmountIn) {
revert MaxAmountError();
}
}
function deposit(IERC4626 vault, address to, uint256 amount, uint256 minSharesOut)
public
payable
virtual
returns (uint256 sharesOut)
{
if ((sharesOut = vault.deposit(amount, to)) < minSharesOut) {
revert MinSharesError();
}
}
function withdraw(IERC4626 vault, address to, uint256 amount, uint256 maxSharesOut)
public
payable
virtual
returns (uint256 sharesOut)
{
if ((sharesOut = vault.withdraw(amount, to, _msgSender())) > maxSharesOut) {
revert MaxSharesError();
}
}
function redeem(IERC4626 vault, address to, uint256 shares, uint256 minAmountOut)
public
payable
virtual
returns (uint256 amountOut)
{
if ((amountOut = vault.redeem(shares, to, _msgSender())) < minAmountOut) {
revert MinAmountError();
}
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.16;
import {ERC4626Router} from "./ERC4626Router.sol";
import {IWETH} from "src/interfaces/IWETH.sol";
contract Router is ERC4626Router {
constructor(string memory name, address forwarder, IWETH _weth) ERC4626Router(name) {
_setTrustedForwarder(forwarder);
weth = _weth;
}
IWETH public immutable weth;
function depositNative() external payable {
weth.deposit{value: msg.value}();
}
function versionRecipient() external view virtual override returns (string memory) {
return "1";
}
}