Contract Source Code:
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive vaults via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(
data
);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value)
private
view
returns (bool)
{
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index)
private
view
returns (bytes32)
{
require(
set._values.length > index,
"EnumerableSet: index out of bounds"
);
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value)
internal
returns (bool)
{
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index)
internal
view
returns (address)
{
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value)
internal
returns (bool)
{
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value)
internal
view
returns (bool)
{
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index)
internal
view
returns (uint256)
{
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
import "./IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(
initializing || isConstructor() || !initialized,
"Contract instance has already been initialized"
);
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly {
cs := extcodesize(self)
}
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
interface ITokenManager {
function mint(address _receiver, uint256 _amount) external;
function issue(uint256 _amount) external;
function assign(address _receiver, uint256 _amount) external;
function burn(address _holder, uint256 _amount) external;
function assignVested(
address _receiver,
uint256 _amount,
uint64 _start,
uint64 _cliff,
uint64 _vested,
bool _revokable
) external returns (uint256);
function revokeVesting(address _holder, uint256 _vestingId) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./EnumerableSet.sol";
import "./Ownable.sol";
import "./SafeMath.sol";
import "./IXToken.sol";
import "./IERC721.sol";
import "./EnumerableSet.sol";
interface IXStore {
struct FeeParams {
uint256 ethBase;
uint256 ethStep;
}
struct BountyParams {
uint256 ethMax;
uint256 length;
}
struct Vault {
address xTokenAddress;
address nftAddress;
address manager;
IXToken xToken;
IERC721 nft;
EnumerableSet.UintSet holdings;
EnumerableSet.UintSet reserves;
mapping(uint256 => address) requester;
mapping(uint256 => bool) isEligible;
mapping(uint256 => bool) shouldReserve;
bool allowMintRequests;
bool flipEligOnRedeem;
bool negateEligibility;
bool isFinalized;
bool isClosed;
FeeParams mintFees;
FeeParams burnFees;
FeeParams dualFees;
BountyParams supplierBounty;
uint256 ethBalance;
uint256 tokenBalance;
bool isD2Vault;
address d2AssetAddress;
IERC20 d2Asset;
uint256 d2Holdings;
}
function isExtension(address addr) external view returns (bool);
function randNonce() external view returns (uint256);
function vaultsLength() external view returns (uint256);
function xTokenAddress(uint256 vaultId) external view returns (address);
function nftAddress(uint256 vaultId) external view returns (address);
function manager(uint256 vaultId) external view returns (address);
function xToken(uint256 vaultId) external view returns (IXToken);
function nft(uint256 vaultId) external view returns (IERC721);
function holdingsLength(uint256 vaultId) external view returns (uint256);
function holdingsContains(uint256 vaultId, uint256 elem)
external
view
returns (bool);
function holdingsAt(uint256 vaultId, uint256 index)
external
view
returns (uint256);
function reservesLength(uint256 vaultId) external view returns (uint256);
function reservesContains(uint256 vaultId, uint256 elem)
external
view
returns (bool);
function reservesAt(uint256 vaultId, uint256 index)
external
view
returns (uint256);
function requester(uint256 vaultId, uint256 id)
external
view
returns (address);
function isEligible(uint256 vaultId, uint256 id)
external
view
returns (bool);
function shouldReserve(uint256 vaultId, uint256 id)
external
view
returns (bool);
function allowMintRequests(uint256 vaultId) external view returns (bool);
function flipEligOnRedeem(uint256 vaultId) external view returns (bool);
function negateEligibility(uint256 vaultId) external view returns (bool);
function isFinalized(uint256 vaultId) external view returns (bool);
function isClosed(uint256 vaultId) external view returns (bool);
function mintFees(uint256 vaultId) external view returns (uint256, uint256);
function burnFees(uint256 vaultId) external view returns (uint256, uint256);
function dualFees(uint256 vaultId) external view returns (uint256, uint256);
function supplierBounty(uint256 vaultId)
external
view
returns (uint256, uint256);
function ethBalance(uint256 vaultId) external view returns (uint256);
function tokenBalance(uint256 vaultId) external view returns (uint256);
function isD2Vault(uint256 vaultId) external view returns (bool);
function d2AssetAddress(uint256 vaultId) external view returns (address);
function d2Asset(uint256 vaultId) external view returns (IERC20);
function d2Holdings(uint256 vaultId) external view returns (uint256);
function setXTokenAddress(uint256 vaultId, address _xTokenAddress) external;
function setNftAddress(uint256 vaultId, address _assetAddress) external;
function setManager(uint256 vaultId, address _manager) external;
function setXToken(uint256 vaultId) external;
function setNft(uint256 vaultId) external;
function holdingsAdd(uint256 vaultId, uint256 elem) external;
function holdingsRemove(uint256 vaultId, uint256 elem) external;
function reservesAdd(uint256 vaultId, uint256 elem) external;
function reservesRemove(uint256 vaultId, uint256 elem) external;
function setRequester(uint256 vaultId, uint256 id, address _requester)
external;
function setIsEligible(uint256 vaultId, uint256 id, bool _bool) external;
function setShouldReserve(uint256 vaultId, uint256 id, bool _shouldReserve)
external;
function setAllowMintRequests(uint256 vaultId, bool isAllowed) external;
function setFlipEligOnRedeem(uint256 vaultId, bool flipElig) external;
function setNegateEligibility(uint256 vaultId, bool negateElig) external;
function setIsFinalized(uint256 vaultId, bool _isFinalized) external;
function setIsClosed(uint256 vaultId, bool _isClosed) external;
function setMintFees(uint256 vaultId, uint256 ethBase, uint256 ethStep)
external;
function setBurnFees(uint256 vaultId, uint256 ethBase, uint256 ethStep)
external;
function setDualFees(uint256 vaultId, uint256 ethBase, uint256 ethStep)
external;
function setSupplierBounty(uint256 vaultId, uint256 ethMax, uint256 length)
external;
function setEthBalance(uint256 vaultId, uint256 _ethBalance) external;
function setTokenBalance(uint256 vaultId, uint256 _tokenBalance) external;
function setIsD2Vault(uint256 vaultId, bool _isD2Vault) external;
function setD2AssetAddress(uint256 vaultId, address _assetAddress) external;
function setD2Asset(uint256 vaultId) external;
function setD2Holdings(uint256 vaultId, uint256 _d2Holdings) external;
////////////////////////////////////////////////////////////
function setIsExtension(address addr, bool _isExtension) external;
function setRandNonce(uint256 _randNonce) external;
function addNewVault() external returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./IERC20.sol";
interface IXToken is IERC20 {
function owner() external returns (address);
function burn(uint256 amount) external;
function burnFrom(address account, uint256 amount) external;
function mint(address to, uint256 amount) external;
function changeName(string calldata name) external;
function changeSymbol(string calldata symbol) external;
function setVaultAddress(address vaultAddress) external;
function transferOwnership(address newOwner) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./Context.sol";
import "./Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context, Initializable {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function initOwnable() internal virtual initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./Initializable.sol";
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
contract ReentrancyGuard is Initializable {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the revault on every call to nonReentrant will be lower in
// amount. Since revaults are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full revault coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
function initReentrancyGuard() internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a revault is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./IERC20.sol";
import "./SafeMath.sol";
import "./Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transfer.selector, to, value)
);
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value)
internal
{
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, value)
);
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value)
internal
{
uint256 newAllowance = token.allowance(address(this), spender).add(
value
);
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value)
internal
{
uint256 newAllowance = token.allowance(address(this), spender).sub(
value,
"SafeERC20: decreased allowance below zero"
);
_callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(
data,
"SafeERC20: low-level call failed"
);
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(
abi.decode(returndata, (bool)),
"SafeERC20: ERC20 operation did not succeed"
);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage)
internal
pure
returns (uint256)
{
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage)
internal
pure
returns (uint256)
{
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage)
internal
pure
returns (uint256)
{
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./Ownable.sol";
import "./ITokenManager.sol";
contract TokenAppController is Ownable {
ITokenManager public tokenManager;
address public tokenManagerAddr;
function initTAC() internal {
initOwnable();
}
function setTokenManager(address tokenManagerAddress) internal onlyOwner {
tokenManagerAddr = tokenManagerAddress;
tokenManager = ITokenManager(tokenManagerAddr);
}
function callMint(address _receiver, uint256 _amount) internal onlyOwner {
tokenManager.mint(_receiver, _amount);
}
function callIssue(uint256 _amount) internal onlyOwner {
tokenManager.issue(_amount);
}
function callAssign(address _receiver, uint256 _amount) internal onlyOwner {
tokenManager.assign(_receiver, _amount);
}
function callBurn(address _holder, uint256 _amount) internal onlyOwner {
tokenManager.burn(_holder, _amount);
}
function callAssignVested(
address _receiver,
uint256 _amount,
uint64 _start,
uint64 _cliff,
uint64 _vested,
bool _revokable
) internal returns (uint256) {
return
tokenManager.assignVested(
_receiver,
_amount,
_start,
_cliff,
_vested,
_revokable
);
}
function callRevokeVesting(address _holder, uint256 _vestingId)
internal
onlyOwner
{
tokenManager.revokeVesting(_holder, _vestingId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./TokenAppController.sol";
import "./IERC20.sol";
import "./IERC721.sol";
import "./IXStore.sol";
import "./SafeMath.sol";
import "./SafeERC20.sol";
import "./ReentrancyGuard.sol";
contract XBounties is TokenAppController, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
uint256 public constant BASE = 10**18;
uint256 public interval = 15 * 60; // 15 minutes
uint256 public start = 1608667200; // Tue Dec 22 2020, 12pm PST
uint64 public vestedUntil = 1609876800; // Tue, Jan 5 2021, 12pm PST
IERC20 public nftxToken;
address payable public daoMultiSig;
struct Bounty {
address tokenContract;
uint256 nftxPrice;
uint256 paidOut;
uint256 payoutCap;
}
event NewBountyAdded(uint256 bountyId);
event BountyFilled(
uint256 bountyId,
uint256 nftxAmount,
uint256 assetAmount,
address sender,
uint64 start,
uint64 cliff,
uint64 vested
);
event NftxPriceSet(uint256 bountyId, uint256 newNftxPrice);
event PayoutCapSet(uint256 bountyId, uint256 newCap);
event BountyClosed(uint256 bountyId);
event EthWithdrawn(uint256 amount);
event Erc20Withdrawn(address tokenContract, uint256 amount);
event Erc721Withdrawn(address nftContract, uint256 tokenId);
Bounty[] internal bounties;
constructor(
address _tokenManager,
address payable _daoMultiSig,
address _nftxToken,
address _xStore
) public {
initTAC();
setTokenManager(_tokenManager);
daoMultiSig = _daoMultiSig;
nftxToken = IERC20(_nftxToken);
IXStore xStore = IXStore(_xStore);
createEthBounty(130 * BASE, 65000 * BASE);
createEthBounty(65 * BASE, 65000 * BASE);
createEthBounty(BASE.mul(130).div(3), 65000 * BASE);
createBounty(
xStore.xTokenAddress(0), // PUNK-BASIC
390 * BASE,
31200 * BASE
);
createBounty(
xStore.xTokenAddress(15), // PUNK-FEMALE
520 * BASE,
15600 * BASE
);
createBounty(
xStore.xTokenAddress(1), // PUNK-ATTR-4
585 * BASE,
14625 * BASE
);
createBounty(
xStore.xTokenAddress(2), // PUNK-ATTR-5
1950 * BASE,
15600 * BASE
);
createBounty(
xStore.xTokenAddress(3), // PUNK-ZOMBIE
8450 * BASE,
16900 * BASE
);
createBounty(
xStore.xTokenAddress(4), // AXIE-ORIGIN
130 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(5), // AXIE-MYSTIC-1
780 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(6), // AXIE-MYSTIC-2
3900 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(7), // KITTY-GEN-0
325 * BASE.div(10),
6760 * BASE
);
createBounty(
xStore.xTokenAddress(8), // KITTY-GEN-0-F
39 * BASE,
6240 * BASE
);
createBounty(
xStore.xTokenAddress(9), // KITTY-FOUNDER
6175 * BASE,
6175 * BASE
);
createBounty(
xStore.xTokenAddress(10), // AVASTR-BASIC
195 * BASE.div(10),
7800 * BASE
);
createBounty(
xStore.xTokenAddress(11), // AVASTR-RANK-30
26 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(12), // AVASTR-RANK-60
195 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(13), // GLYPH
1300 * BASE,
23400 * BASE
);
createBounty(
xStore.xTokenAddress(14), // JOY
650 * BASE,
11700 * BASE
);
}
function setStart(uint256 newStart) public onlyOwner {
start = newStart;
}
function setInterval(uint256 newInterval) public onlyOwner {
interval = newInterval;
}
function setVestedUntil(uint64 newTime) public onlyOwner {
vestedUntil = newTime;
}
function getBountyInfo(uint256 bountyId)
public
view
returns (address, uint256, uint256, uint256)
{
require(bountyId < bounties.length, "Invalid bountyId");
return (
bounties[bountyId].tokenContract,
bounties[bountyId].nftxPrice,
bounties[bountyId].paidOut,
bounties[bountyId].payoutCap
);
}
function getMaxPayout() public view returns (uint256) {
uint256 tMinus4 = start.sub(interval.mul(4));
uint256 tMinus3 = start.sub(interval.mul(3));
uint256 tMinus2 = start.sub(interval.mul(2));
uint256 tMinus1 = start.sub(interval.mul(1));
uint256 tm4Max = 0;
uint256 tm3Max = 50 * BASE;
uint256 tm2Max = 500 * BASE;
uint256 tm1Max = 5000 * BASE;
uint256 tm0Max = 50000 * BASE;
if (now < tMinus4) {
return 0;
} else if (now < tMinus3) {
uint256 progressBigNum = now.sub(tMinus4).mul(BASE).div(interval);
uint256 addedPayout = tm3Max.sub(tm4Max).mul(progressBigNum).div(
BASE
);
return tm4Max.add(addedPayout);
} else if (now < tMinus2) {
uint256 progressBigNum = now.sub(tMinus3).mul(BASE).div(interval);
uint256 addedPayout = tm2Max.sub(tm3Max).mul(progressBigNum).div(
BASE
);
return tm3Max.add(addedPayout);
} else if (now < tMinus1) {
uint256 progressBigNum = now.sub(tMinus2).mul(BASE).div(interval);
uint256 addedPayout = tm1Max.sub(tm2Max).mul(progressBigNum).div(
BASE
);
return tm2Max.add(addedPayout);
} else if (now < start) {
uint256 progressBigNum = now.sub(tMinus1).mul(BASE).div(interval);
uint256 addedPayout = tm0Max.sub(tm1Max).mul(progressBigNum).div(
BASE
);
return tm1Max.add(addedPayout);
} else {
return tm0Max;
}
}
function getBountiesLength() public view returns (uint256) {
return bounties.length;
}
function getIsEth(uint256 bountyId) public view returns (bool) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].tokenContract == address(0);
}
function getTokenContract(uint256 bountyId) public view returns (address) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].tokenContract;
}
function getNftxPrice(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].nftxPrice;
}
function getPayoutCap(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].payoutCap;
}
function getPaidOut(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].paidOut;
}
function setNftxPrice(uint256 bountyId, uint256 newPrice) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].nftxPrice = newPrice;
emit NftxPriceSet(bountyId, newPrice);
}
function setPayoutCap(uint256 bountyId, uint256 newCap) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].payoutCap = newCap;
emit PayoutCapSet(bountyId, newCap);
}
function createEthBounty(uint256 nftxPricePerEth, uint256 amountOfEth)
public
onlyOwner
{
createBounty(address(0), nftxPricePerEth, amountOfEth);
}
function createBounty(address token, uint256 nftxPrice, uint256 payoutCap)
public
onlyOwner
{
Bounty memory newBounty;
newBounty.tokenContract = token;
newBounty.nftxPrice = nftxPrice;
newBounty.payoutCap = payoutCap;
bounties.push(newBounty);
uint256 bountyId = bounties.length.sub(1);
emit NewBountyAdded(bountyId);
}
function closeBounty(uint256 bountyId) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].payoutCap = bounties[bountyId].paidOut;
emit BountyClosed(bountyId);
}
function fillBounty(uint256 bountyId, uint256 amountBeingSent)
public
payable
nonReentrant
{
_fillBountyCustom(
bountyId,
amountBeingSent,
vestedUntil - 2,
vestedUntil - 1,
vestedUntil
);
}
/* function fillBountyCustom(
uint256 bountyId,
uint256 donationSize,
uint64 _start,
uint64 cliff,
uint64 vested
) public payable nonReentrant {
_fillBountyCustom(bountyId, donationSize, _start, cliff, vested);
} */
function _fillBountyCustom(
uint256 bountyId,
uint256 donationSize,
uint64 _start,
uint64 cliff,
uint64 vested
) internal {
require(cliff >= vestedUntil - 1 && vested >= vestedUntil, "Not valid");
require(bountyId < bounties.length, "Invalid bountyId");
Bounty storage bounty = bounties[bountyId];
uint256 rewardCap = getMaxPayout();
require(rewardCap > 0, "Must wait for cap to be lifted");
uint256 remainingNftx = bounty.payoutCap.sub(bounty.paidOut);
require(remainingNftx > 0, "Bounty is already finished");
uint256 requestedNftx = donationSize.mul(bounty.nftxPrice).div(BASE);
uint256 willGive = remainingNftx < requestedNftx
? remainingNftx
: rewardCap < requestedNftx
? rewardCap
: requestedNftx;
uint256 willTake = donationSize.mul(willGive).div(requestedNftx);
if (getIsEth(bountyId)) {
require(msg.value >= willTake, "Value sent is insufficient");
if (msg.value > willTake) {
address payable _sender = msg.sender;
_sender.transfer(msg.value.sub(willTake));
}
daoMultiSig.transfer(willTake);
} else {
IERC20 fundToken = IERC20(bounty.tokenContract);
fundToken.safeTransferFrom(msg.sender, daoMultiSig, willTake);
}
if (now > vested) {
nftxToken.safeTransfer(msg.sender, willGive);
} else {
nftxToken.safeTransfer(tokenManagerAddr, willGive);
callAssignVested(
msg.sender,
willGive,
_start,
cliff,
vested,
false
);
}
bounty.paidOut = bounty.paidOut.add(willGive);
emit BountyFilled(
bountyId,
willGive,
willTake,
msg.sender,
_start,
cliff,
vested
);
}
function withdrawEth(uint256 amount) public onlyOwner {
address payable sender = msg.sender;
sender.transfer(amount);
emit EthWithdrawn(amount);
}
function withdrawErc20(address tokenContract, uint256 amount)
public
onlyOwner
{
IERC20 token = IERC20(tokenContract);
token.safeTransfer(msg.sender, amount);
emit Erc20Withdrawn(tokenContract, amount);
}
function withdrawErc721(address nftContract, uint256 tokenId)
public
onlyOwner
{
IERC721 nft = IERC721(nftContract);
nft.safeTransferFrom(address(this), msg.sender, tokenId);
emit Erc721Withdrawn(nftContract, tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.8;
import "./TokenAppController.sol";
import "./IERC20.sol";
import "./IERC721.sol";
import "./IXStore.sol";
import "./SafeMath.sol";
import "./SafeERC20.sol";
import "./ReentrancyGuard.sol";
contract XBountiesRinkeby is TokenAppController, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
uint256 public constant BASE = 10**18;
uint256 public interval = 15 * 60; // 15 minutes
uint256 public start = 1608580800; // Mon, Dec 21 2020, 12pm PST
uint64 public vestedUntil = 1609876800; // Tue, Jan 5 2021, 12pm PST
IERC20 public nftxToken;
address payable public daoMultiSig;
struct Bounty {
address tokenContract;
uint256 nftxPrice;
uint256 paidOut;
uint256 payoutCap;
}
event NewBountyAdded(uint256 bountyId);
event BountyFilled(
uint256 bountyId,
uint256 nftxAmount,
uint256 assetAmount,
address sender,
uint64 start,
uint64 cliff,
uint64 vested
);
event NftxPriceSet(uint256 bountyId, uint256 newNftxPrice);
event PayoutCapSet(uint256 bountyId, uint256 newCap);
event BountyClosed(uint256 bountyId);
event EthWithdrawn(uint256 amount);
event Erc20Withdrawn(address tokenContract, uint256 amount);
event Erc721Withdrawn(address nftContract, uint256 tokenId);
Bounty[] internal bounties;
constructor(
address _tokenManager,
address payable _daoMultiSig,
address _nftxToken,
address _xStore
) public {
initTAC();
setTokenManager(_tokenManager);
daoMultiSig = _daoMultiSig;
nftxToken = IERC20(_nftxToken);
IXStore xStore = IXStore(_xStore);
createEthBounty(130 * BASE, 65000 * BASE);
createEthBounty(65 * BASE, 65000 * BASE);
createEthBounty(BASE.mul(130).div(3), 65000 * BASE);
createBounty(
xStore.xTokenAddress(0), // PUNK-BASIC
390 * BASE,
31200 * BASE
);
createBounty(
xStore.xTokenAddress(1), // PUNK-ATTR-4
585 * BASE,
14625 * BASE
);
createBounty(
xStore.xTokenAddress(2), // PUNK-ATTR-5
1950 * BASE,
15600 * BASE
);
createBounty(
xStore.xTokenAddress(3), // PUNK-ZOMBIE
8450 * BASE,
16900 * BASE
);
createBounty(
xStore.xTokenAddress(4), // AXIE-ORIGIN
130 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(5), // AXIE-MYSTIC-1
780 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(6), // AXIE-MYSTIC-2
3900 * BASE,
7800 * BASE
);
createBounty(
xStore.xTokenAddress(7), // KITTY-GEN-0
26 * BASE,
5850 * BASE
);
createBounty(
xStore.xTokenAddress(8), // KITTY-GEN-0-F
39 * BASE,
5850 * BASE
);
createBounty(
xStore.xTokenAddress(9), // KITTY-FOUNDER
6175 * BASE,
6175 * BASE
);
createBounty(
xStore.xTokenAddress(10), // AVASTR-BASIC
20 * BASE,
6175 * BASE
);
createBounty(
xStore.xTokenAddress(11), // AVASTR-RANK-30
26 * BASE,
6175 * BASE
);
createBounty(
xStore.xTokenAddress(12), // AVASTR-RANK-60
195 * BASE,
6175 * BASE
);
createBounty(
xStore.xTokenAddress(13), // GLYPH
1300 * BASE,
26000 * BASE
);
createBounty(
xStore.xTokenAddress(14), // JOY
455 * BASE,
10010 * BASE
);
}
function setStart(uint256 newStart) public onlyOwner {
start = newStart;
}
function setInterval(uint256 newInterval) public onlyOwner {
interval = newInterval;
}
function setVestedUntil(uint64 newTime) public onlyOwner {
vestedUntil = newTime;
}
function getBountyInfo(uint256 bountyId)
public
view
returns (address, uint256, uint256, uint256)
{
require(bountyId < bounties.length, "Invalid bountyId");
return (
bounties[bountyId].tokenContract,
bounties[bountyId].nftxPrice,
bounties[bountyId].paidOut,
bounties[bountyId].payoutCap
);
}
function getMaxPayout() public view returns (uint256) {
uint256 tMinus4 = start.sub(interval.mul(4));
uint256 tMinus3 = start.sub(interval.mul(3));
uint256 tMinus2 = start.sub(interval.mul(2));
uint256 tMinus1 = start.sub(interval.mul(1));
uint256 tm4Max = 0;
uint256 tm3Max = 50 * BASE;
uint256 tm2Max = 500 * BASE;
uint256 tm1Max = 5000 * BASE;
uint256 tm0Max = 50000 * BASE;
if (now < tMinus4) {
return 0;
} else if (now < tMinus3) {
uint256 progressBigNum = now.sub(tMinus4).mul(BASE).div(interval);
uint256 addedPayout = tm3Max.sub(tm4Max).mul(progressBigNum).div(
BASE
);
return tm4Max.add(addedPayout);
} else if (now < tMinus2) {
uint256 progressBigNum = now.sub(tMinus3).mul(BASE).div(interval);
uint256 addedPayout = tm2Max.sub(tm3Max).mul(progressBigNum).div(
BASE
);
return tm3Max.add(addedPayout);
} else if (now < tMinus1) {
uint256 progressBigNum = now.sub(tMinus2).mul(BASE).div(interval);
uint256 addedPayout = tm1Max.sub(tm2Max).mul(progressBigNum).div(
BASE
);
return tm2Max.add(addedPayout);
} else if (now < start) {
uint256 progressBigNum = now.sub(tMinus1).mul(BASE).div(interval);
uint256 addedPayout = tm0Max.sub(tm1Max).mul(progressBigNum).div(
BASE
);
return tm1Max.add(addedPayout);
} else {
return tm0Max;
}
}
function getBountiesLength() public view returns (uint256) {
return bounties.length;
}
function getIsEth(uint256 bountyId) public view returns (bool) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].tokenContract == address(0);
}
function getTokenContract(uint256 bountyId) public view returns (address) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].tokenContract;
}
function getNftxPrice(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].nftxPrice;
}
function getPayoutCap(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].payoutCap;
}
function getPaidOut(uint256 bountyId) public view returns (uint256) {
require(bountyId < bounties.length, "Invalid bountyId");
return bounties[bountyId].paidOut;
}
function setNftxPrice(uint256 bountyId, uint256 newPrice) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].nftxPrice = newPrice;
emit NftxPriceSet(bountyId, newPrice);
}
function setPayoutCap(uint256 bountyId, uint256 newCap) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].payoutCap = newCap;
emit PayoutCapSet(bountyId, newCap);
}
function createEthBounty(uint256 nftxPricePerEth, uint256 amountOfEth)
public
onlyOwner
{
createBounty(address(0), nftxPricePerEth, amountOfEth);
}
function createBounty(address token, uint256 nftxPrice, uint256 payoutCap)
public
onlyOwner
{
Bounty memory newBounty;
newBounty.tokenContract = token;
newBounty.nftxPrice = nftxPrice;
newBounty.payoutCap = payoutCap;
bounties.push(newBounty);
uint256 bountyId = bounties.length.sub(1);
emit NewBountyAdded(bountyId);
}
function closeBounty(uint256 bountyId) public onlyOwner {
require(bountyId < bounties.length, "Invalid bountyId");
bounties[bountyId].payoutCap = bounties[bountyId].paidOut;
emit BountyClosed(bountyId);
}
function fillBounty(uint256 bountyId, uint256 amountBeingSent)
public
payable
nonReentrant
{
_fillBountyCustom(
bountyId,
amountBeingSent,
vestedUntil - 2,
vestedUntil - 1,
vestedUntil
);
}
/* function fillBountyCustom(
uint256 bountyId,
uint256 donationSize,
uint64 _start,
uint64 cliff,
uint64 vested
) public payable nonReentrant {
_fillBountyCustom(bountyId, donationSize, _start, cliff, vested);
} */
function _fillBountyCustom(
uint256 bountyId,
uint256 donationSize,
uint64 _start,
uint64 cliff,
uint64 vested
) internal {
require(cliff >= vestedUntil - 1 && vested >= vestedUntil, "Not valid");
require(bountyId < bounties.length, "Invalid bountyId");
Bounty storage bounty = bounties[bountyId];
uint256 rewardCap = getMaxPayout();
require(rewardCap > 0, "Must wait for cap to be lifted");
uint256 remainingNftx = bounty.payoutCap.sub(bounty.paidOut);
require(remainingNftx > 0, "Bounty is already finished");
uint256 requestedNftx = donationSize.mul(bounty.nftxPrice).div(BASE);
uint256 willGive = remainingNftx < requestedNftx
? remainingNftx
: rewardCap < requestedNftx
? rewardCap
: requestedNftx;
uint256 willTake = donationSize.mul(willGive).div(requestedNftx);
if (getIsEth(bountyId)) {
require(msg.value >= willTake, "Value sent is insufficient");
if (msg.value > willTake) {
address payable _sender = msg.sender;
_sender.transfer(msg.value.sub(willTake));
}
daoMultiSig.transfer(willTake);
} else {
IERC20 fundToken = IERC20(bounty.tokenContract);
fundToken.safeTransferFrom(msg.sender, daoMultiSig, willTake);
}
if (now > vested) {
nftxToken.safeTransfer(msg.sender, willGive);
} else {
nftxToken.safeTransfer(tokenManagerAddr, willGive);
callAssignVested(
msg.sender,
willGive,
_start,
cliff,
vested,
false
);
}
bounty.paidOut = bounty.paidOut.add(willGive);
emit BountyFilled(
bountyId,
willGive,
willTake,
msg.sender,
_start,
cliff,
vested
);
}
function withdrawEth(uint256 amount) public onlyOwner {
address payable sender = msg.sender;
sender.transfer(amount);
emit EthWithdrawn(amount);
}
function withdrawErc20(address tokenContract, uint256 amount)
public
onlyOwner
{
IERC20 token = IERC20(tokenContract);
token.safeTransfer(msg.sender, amount);
emit Erc20Withdrawn(tokenContract, amount);
}
function withdrawErc721(address nftContract, uint256 tokenId)
public
onlyOwner
{
IERC721 nft = IERC721(nftContract);
nft.safeTransferFrom(address(this), msg.sender, tokenId);
emit Erc721Withdrawn(nftContract, tokenId);
}
}