Contract Source Code:
File 1 of 1 : Wearables
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be aplied to your functions to restrict their use to
* the owner.
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* > Note: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: multi-token-standard/contracts/interfaces/IERC165.sol
pragma solidity ^0.5.12;
/**
* @title ERC165
* @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-165.md
*/
interface IERC165 {
/**
* @notice Query if a contract implements an interface
* @dev Interface identification is specified in ERC-165. This function
* uses less than 30,000 gas
* @param _interfaceId The interface identifier, as specified in ERC-165
*/
function supportsInterface(bytes4 _interfaceId)
external
view
returns (bool);
}
// File: multi-token-standard/contracts/utils/SafeMath.sol
pragma solidity ^0.5.12;
/**
* @title SafeMath
* @dev Unsigned math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath#mul: OVERFLOW");
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, "SafeMath#div: DIVISION_BY_ZERO");
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath#sub: UNDERFLOW");
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath#add: OVERFLOW");
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, "SafeMath#mod: DIVISION_BY_ZERO");
return a % b;
}
}
// File: multi-token-standard/contracts/interfaces/IERC1155TokenReceiver.sol
pragma solidity ^0.5.12;
/**
* @dev ERC-1155 interface for accepting safe transfers.
*/
interface IERC1155TokenReceiver {
/**
* @notice Handle the receipt of a single ERC1155 token type
* @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeTransferFrom` after the balance has been updated
* This function MAY throw to revert and reject the transfer
* Return of other amount than the magic value MUST result in the transaction being reverted
* Note: The token contract address is always the message sender
* @param _operator The address which called the `safeTransferFrom` function
* @param _from The address which previously owned the token
* @param _id The id of the token being transferred
* @param _amount The amount of tokens being transferred
* @param _data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
*/
function onERC1155Received(address _operator, address _from, uint256 _id, uint256 _amount, bytes calldata _data) external returns(bytes4);
/**
* @notice Handle the receipt of multiple ERC1155 token types
* @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeBatchTransferFrom` after the balances have been updated
* This function MAY throw to revert and reject the transfer
* Return of other amount than the magic value WILL result in the transaction being reverted
* Note: The token contract address is always the message sender
* @param _operator The address which called the `safeBatchTransferFrom` function
* @param _from The address which previously owned the token
* @param _ids An array containing ids of each token being transferred
* @param _amounts An array containing amounts of each token being transferred
* @param _data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
*/
function onERC1155BatchReceived(address _operator, address _from, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external returns(bytes4);
/**
* @notice Indicates whether a contract implements the `ERC1155TokenReceiver` functions and so can accept ERC1155 token types.
* @param interfaceID The ERC-165 interface ID that is queried for support.s
* @dev This function MUST return true if it implements the ERC1155TokenReceiver interface and ERC-165 interface.
* This function MUST NOT consume more than 5,000 gas.
* @return Wheter ERC-165 or ERC1155TokenReceiver interfaces are supported.
*/
function supportsInterface(bytes4 interfaceID) external view returns (bool);
}
// File: multi-token-standard/contracts/interfaces/IERC1155.sol
pragma solidity ^0.5.12;
interface IERC1155 {
// Events
/**
* @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
* Operator MUST be msg.sender
* When minting/creating tokens, the `_from` field MUST be set to `0x0`
* When burning/destroying tokens, the `_to` field MUST be set to `0x0`
* The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
* To broadcast the existence of a token ID with no initial balance, the contract SHOULD emit the TransferSingle event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
*/
event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _amount);
/**
* @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
* Operator MUST be msg.sender
* When minting/creating tokens, the `_from` field MUST be set to `0x0`
* When burning/destroying tokens, the `_to` field MUST be set to `0x0`
* The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
* To broadcast the existence of multiple token IDs with no initial balance, this SHOULD emit the TransferBatch event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
*/
event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _amounts);
/**
* @dev MUST emit when an approval is updated
*/
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
/**
* @dev MUST emit when the URI is updated for a token ID
* URIs are defined in RFC 3986
* The URI MUST point a JSON file that conforms to the "ERC-1155 Metadata JSON Schema"
*/
event URI(string _amount, uint256 indexed _id);
/**
* @notice Transfers amount of an _id from the _from address to the _to address specified
* @dev MUST emit TransferSingle event on success
* Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
* MUST throw if `_to` is the zero address
* MUST throw if balance of sender for token `_id` is lower than the `_amount` sent
* MUST throw on any other error
* When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155Received` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* @param _from Source address
* @param _to Target address
* @param _id ID of the token type
* @param _amount Transfered amount
* @param _data Additional data with no specified format, sent in call to `_to`
*/
function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes calldata _data) external;
/**
* @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
* @dev MUST emit TransferBatch event on success
* Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
* MUST throw if `_to` is the zero address
* MUST throw if length of `_ids` is not the same as length of `_amounts`
* MUST throw if any of the balance of sender for token `_ids` is lower than the respective `_amounts` sent
* MUST throw on any other error
* When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155BatchReceived` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* Transfers and events MUST occur in the array order they were submitted (_ids[0] before _ids[1], etc)
* @param _from Source addresses
* @param _to Target addresses
* @param _ids IDs of each token type
* @param _amounts Transfer amounts per token type
* @param _data Additional data with no specified format, sent in call to `_to`
*/
function safeBatchTransferFrom(address _from, address _to, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external;
/**
* @notice Get the balance of an account's Tokens
* @param _owner The address of the token holder
* @param _id ID of the Token
* @return The _owner's balance of the Token type requested
*/
function balanceOf(address _owner, uint256 _id) external view returns (uint256);
/**
* @notice Get the balance of multiple account/token pairs
* @param _owners The addresses of the token holders
* @param _ids ID of the Tokens
* @return The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
*/
function balanceOfBatch(address[] calldata _owners, uint256[] calldata _ids) external view returns (uint256[] memory);
/**
* @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
* @dev MUST emit the ApprovalForAll event on success
* @param _operator Address to add to the set of authorized operators
* @param _approved True if the operator is approved, false to revoke approval
*/
function setApprovalForAll(address _operator, bool _approved) external;
/**
* @notice Queries the approval status of an operator for a given owner
* @param _owner The owner of the Tokens
* @param _operator Address of authorized operator
* @return True if the operator is approved, false if not
*/
function isApprovedForAll(address _owner, address _operator) external view returns (bool isOperator);
}
// File: multi-token-standard/contracts/utils/Address.sol
/**
* Copyright 2018 ZeroEx Intl.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
pragma solidity ^0.5.12;
/**
* Utility library of inline functions on addresses
*/
library Address {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account address of the account to check
* @return whether the target address is a contract
*/
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
// File: multi-token-standard/contracts/tokens/ERC1155/ERC1155.sol
pragma solidity ^0.5.12;
/**
* @dev Implementation of Multi-Token Standard contract
*/
contract ERC1155 is IERC165 {
using SafeMath for uint256;
using Address for address;
/***********************************|
| Variables and Events |
|__________________________________*/
// onReceive function signatures
bytes4 constant internal ERC1155_RECEIVED_VALUE = 0xf23a6e61;
bytes4 constant internal ERC1155_BATCH_RECEIVED_VALUE = 0xbc197c81;
// Objects balances
mapping (address => mapping(uint256 => uint256)) internal balances;
// Operator Functions
mapping (address => mapping(address => bool)) internal operators;
// Events
event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _amount);
event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _amounts);
event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
event URI(string _uri, uint256 indexed _id);
/***********************************|
| Public Transfer Functions |
|__________________________________*/
/**
* @notice Transfers amount amount of an _id from the _from address to the _to address specified
* @param _from Source address
* @param _to Target address
* @param _id ID of the token type
* @param _amount Transfered amount
* @param _data Additional data with no specified format, sent in call to `_to`
*/
function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes memory _data)
public
{
require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeTransferFrom: INVALID_OPERATOR");
require(_to != address(0),"ERC1155#safeTransferFrom: INVALID_RECIPIENT");
// require(_amount >= balances[_from][_id]) is not necessary since checked with safemath operations
_safeTransferFrom(_from, _to, _id, _amount);
_callonERC1155Received(_from, _to, _id, _amount, _data);
}
/**
* @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
* @param _from Source addresses
* @param _to Target addresses
* @param _ids IDs of each token type
* @param _amounts Transfer amounts per token type
* @param _data Additional data with no specified format, sent in call to `_to`
*/
function safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
public
{
// Requirements
require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeBatchTransferFrom: INVALID_OPERATOR");
require(_to != address(0), "ERC1155#safeBatchTransferFrom: INVALID_RECIPIENT");
_safeBatchTransferFrom(_from, _to, _ids, _amounts);
_callonERC1155BatchReceived(_from, _to, _ids, _amounts, _data);
}
/***********************************|
| Internal Transfer Functions |
|__________________________________*/
/**
* @notice Transfers amount amount of an _id from the _from address to the _to address specified
* @param _from Source address
* @param _to Target address
* @param _id ID of the token type
* @param _amount Transfered amount
*/
function _safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount)
internal
{
// Update balances
balances[_from][_id] = balances[_from][_id].sub(_amount); // Subtract amount
balances[_to][_id] = balances[_to][_id].add(_amount); // Add amount
// Emit event
emit TransferSingle(msg.sender, _from, _to, _id, _amount);
}
/**
* @notice Verifies if receiver is contract and if so, calls (_to).onERC1155Received(...)
*/
function _callonERC1155Received(address _from, address _to, uint256 _id, uint256 _amount, bytes memory _data)
internal
{
// Check if recipient is contract
if (_to.isContract()) {
bytes4 retval = IERC1155TokenReceiver(_to).onERC1155Received(msg.sender, _from, _id, _amount, _data);
require(retval == ERC1155_RECEIVED_VALUE, "ERC1155#_callonERC1155Received: INVALID_ON_RECEIVE_MESSAGE");
}
}
/**
* @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
* @param _from Source addresses
* @param _to Target addresses
* @param _ids IDs of each token type
* @param _amounts Transfer amounts per token type
*/
function _safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts)
internal
{
require(_ids.length == _amounts.length, "ERC1155#_safeBatchTransferFrom: INVALID_ARRAYS_LENGTH");
// Number of transfer to execute
uint256 nTransfer = _ids.length;
// Executing all transfers
for (uint256 i = 0; i < nTransfer; i++) {
// Update storage balance of previous bin
balances[_from][_ids[i]] = balances[_from][_ids[i]].sub(_amounts[i]);
balances[_to][_ids[i]] = balances[_to][_ids[i]].add(_amounts[i]);
}
// Emit event
emit TransferBatch(msg.sender, _from, _to, _ids, _amounts);
}
/**
* @notice Verifies if receiver is contract and if so, calls (_to).onERC1155BatchReceived(...)
*/
function _callonERC1155BatchReceived(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
internal
{
// Pass data if recipient is contract
if (_to.isContract()) {
bytes4 retval = IERC1155TokenReceiver(_to).onERC1155BatchReceived(msg.sender, _from, _ids, _amounts, _data);
require(retval == ERC1155_BATCH_RECEIVED_VALUE, "ERC1155#_callonERC1155BatchReceived: INVALID_ON_RECEIVE_MESSAGE");
}
}
/***********************************|
| Operator Functions |
|__________________________________*/
/**
* @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
* @param _operator Address to add to the set of authorized operators
* @param _approved True if the operator is approved, false to revoke approval
*/
function setApprovalForAll(address _operator, bool _approved)
external
{
// Update operator status
operators[msg.sender][_operator] = _approved;
emit ApprovalForAll(msg.sender, _operator, _approved);
}
/**
* @notice Queries the approval status of an operator for a given owner
* @param _owner The owner of the Tokens
* @param _operator Address of authorized operator
* @return True if the operator is approved, false if not
*/
function isApprovedForAll(address _owner, address _operator)
public view returns (bool isOperator)
{
return operators[_owner][_operator];
}
/***********************************|
| Balance Functions |
|__________________________________*/
/**
* @notice Get the balance of an account's Tokens
* @param _owner The address of the token holder
* @param _id ID of the Token
* @return The _owner's balance of the Token type requested
*/
function balanceOf(address _owner, uint256 _id)
public view returns (uint256)
{
return balances[_owner][_id];
}
/**
* @notice Get the balance of multiple account/token pairs
* @param _owners The addresses of the token holders
* @param _ids ID of the Tokens
* @return The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
*/
function balanceOfBatch(address[] memory _owners, uint256[] memory _ids)
public view returns (uint256[] memory)
{
require(_owners.length == _ids.length, "ERC1155#balanceOfBatch: INVALID_ARRAY_LENGTH");
// Variables
uint256[] memory batchBalances = new uint256[](_owners.length);
// Iterate over each owner and token ID
for (uint256 i = 0; i < _owners.length; i++) {
batchBalances[i] = balances[_owners[i]][_ids[i]];
}
return batchBalances;
}
/***********************************|
| ERC165 Functions |
|__________________________________*/
/**
* INTERFACE_SIGNATURE_ERC165 = bytes4(keccak256("supportsInterface(bytes4)"));
*/
bytes4 constant private INTERFACE_SIGNATURE_ERC165 = 0x01ffc9a7;
/**
* INTERFACE_SIGNATURE_ERC1155 =
* bytes4(keccak256("safeTransferFrom(address,address,uint256,uint256,bytes)")) ^
* bytes4(keccak256("safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)")) ^
* bytes4(keccak256("balanceOf(address,uint256)")) ^
* bytes4(keccak256("balanceOfBatch(address[],uint256[])")) ^
* bytes4(keccak256("setApprovalForAll(address,bool)")) ^
* bytes4(keccak256("isApprovedForAll(address,address)"));
*/
bytes4 constant private INTERFACE_SIGNATURE_ERC1155 = 0xd9b67a26;
/**
* @notice Query if a contract implements an interface
* @param _interfaceID The interface identifier, as specified in ERC-165
* @return `true` if the contract implements `_interfaceID` and
*/
function supportsInterface(bytes4 _interfaceID) external view returns (bool) {
if (_interfaceID == INTERFACE_SIGNATURE_ERC165 ||
_interfaceID == INTERFACE_SIGNATURE_ERC1155) {
return true;
}
return false;
}
}
// File: multi-token-standard/contracts/tokens/ERC1155/ERC1155Metadata.sol
pragma solidity ^0.5.11;
/**
* @notice Contract that handles metadata related methods.
* @dev Methods assume a deterministic generation of URI based on token IDs.
* Methods also assume that URI uses hex representation of token IDs.
*/
contract ERC1155Metadata {
// URI's default URI prefix
string internal baseMetadataURI;
event URI(string _uri, uint256 indexed _id);
/***********************************|
| Metadata Public Function s |
|__________________________________*/
/**
* @notice A distinct Uniform Resource Identifier (URI) for a given token.
* @dev URIs are defined in RFC 3986.
* URIs are assumed to be deterministically generated based on token ID
* Token IDs are assumed to be represented in their hex format in URIs
* @return URI string
*/
function uri(uint256 _id) public view returns (string memory) {
return string(abi.encodePacked(baseMetadataURI, _uint2str(_id), ".json"));
}
/***********************************|
| Metadata Internal Functions |
|__________________________________*/
/**
* @notice Will emit default URI log event for corresponding token _id
* @param _tokenIDs Array of IDs of tokens to log default URI
*/
function _logURIs(uint256[] memory _tokenIDs) internal {
string memory baseURL = baseMetadataURI;
string memory tokenURI;
for (uint256 i = 0; i < _tokenIDs.length; i++) {
tokenURI = string(abi.encodePacked(baseURL, _uint2str(_tokenIDs[i]), ".json"));
emit URI(tokenURI, _tokenIDs[i]);
}
}
/**
* @notice Will emit a specific URI log event for corresponding token
* @param _tokenIDs IDs of the token corresponding to the _uris logged
* @param _URIs The URIs of the specified _tokenIDs
*/
function _logURIs(uint256[] memory _tokenIDs, string[] memory _URIs) internal {
require(_tokenIDs.length == _URIs.length, "ERC1155Metadata#_logURIs: INVALID_ARRAYS_LENGTH");
for (uint256 i = 0; i < _tokenIDs.length; i++) {
emit URI(_URIs[i], _tokenIDs[i]);
}
}
/**
* @notice Will update the base URL of token's URI
* @param _newBaseMetadataURI New base URL of token's URI
*/
function _setBaseMetadataURI(string memory _newBaseMetadataURI) internal {
baseMetadataURI = _newBaseMetadataURI;
}
/***********************************|
| Utility Internal Functions |
|__________________________________*/
/**
* @notice Convert uint256 to string
* @param _i Unsigned integer to convert to string
*/
function _uint2str(uint256 _i) internal pure returns (string memory _uintAsString) {
if (_i == 0) {
return "0";
}
uint256 j = _i;
uint256 ii = _i;
uint256 len;
// Get number of bytes
while (j != 0) {
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint256 k = len - 1;
// Get each individual ASCII
while (ii != 0) {
bstr[k--] = byte(uint8(48 + ii % 10));
ii /= 10;
}
// Convert to string
return string(bstr);
}
}
// File: multi-token-standard/contracts/tokens/ERC1155/ERC1155MintBurn.sol
pragma solidity ^0.5.12;
/**
* @dev Multi-Fungible Tokens with minting and burning methods. These methods assume
* a parent contract to be executed as they are `internal` functions
*/
contract ERC1155MintBurn is ERC1155 {
/****************************************|
| Minting Functions |
|_______________________________________*/
/**
* @notice Mint _amount of tokens of a given id
* @param _to The address to mint tokens to
* @param _id Token id to mint
* @param _amount The amount to be minted
* @param _data Data to pass if receiver is contract
*/
function _mint(address _to, uint256 _id, uint256 _amount, bytes memory _data)
internal
{
// Add _amount
balances[_to][_id] = balances[_to][_id].add(_amount);
// Emit event
emit TransferSingle(msg.sender, address(0x0), _to, _id, _amount);
// Calling onReceive method if recipient is contract
_callonERC1155Received(address(0x0), _to, _id, _amount, _data);
}
/**
* @notice Mint tokens for each ids in _ids
* @param _to The address to mint tokens to
* @param _ids Array of ids to mint
* @param _amounts Array of amount of tokens to mint per id
* @param _data Data to pass if receiver is contract
*/
function _batchMint(address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
internal
{
require(_ids.length == _amounts.length, "ERC1155MintBurn#batchMint: INVALID_ARRAYS_LENGTH");
// Number of mints to execute
uint256 nMint = _ids.length;
// Executing all minting
for (uint256 i = 0; i < nMint; i++) {
// Update storage balance
balances[_to][_ids[i]] = balances[_to][_ids[i]].add(_amounts[i]);
}
// Emit batch mint event
emit TransferBatch(msg.sender, address(0x0), _to, _ids, _amounts);
// Calling onReceive method if recipient is contract
_callonERC1155BatchReceived(address(0x0), _to, _ids, _amounts, _data);
}
/****************************************|
| Burning Functions |
|_______________________________________*/
/**
* @notice Burn _amount of tokens of a given token id
* @param _from The address to burn tokens from
* @param _id Token id to burn
* @param _amount The amount to be burned
*/
function _burn(address _from, uint256 _id, uint256 _amount)
internal
{
//Substract _amount
balances[_from][_id] = balances[_from][_id].sub(_amount);
// Emit event
emit TransferSingle(msg.sender, _from, address(0x0), _id, _amount);
}
/**
* @notice Burn tokens of given token id for each (_ids[i], _amounts[i]) pair
* @param _from The address to burn tokens from
* @param _ids Array of token ids to burn
* @param _amounts Array of the amount to be burned
*/
function _batchBurn(address _from, uint256[] memory _ids, uint256[] memory _amounts)
internal
{
require(_ids.length == _amounts.length, "ERC1155MintBurn#batchBurn: INVALID_ARRAYS_LENGTH");
// Number of mints to execute
uint256 nBurn = _ids.length;
// Executing all minting
for (uint256 i = 0; i < nBurn; i++) {
// Update storage balance
balances[_from][_ids[i]] = balances[_from][_ids[i]].sub(_amounts[i]);
}
// Emit batch mint event
emit TransferBatch(msg.sender, _from, address(0x0), _ids, _amounts);
}
}
// File: contracts/Strings.sol
pragma solidity ^0.5.11;
library Strings {
// via https://github.com/oraclize/ethereum-api/blob/master/oraclizeAPI_0.5.sol
function strConcat(string memory _a, string memory _b, string memory _c, string memory _d, string memory _e) internal pure returns (string memory) {
bytes memory _ba = bytes(_a);
bytes memory _bb = bytes(_b);
bytes memory _bc = bytes(_c);
bytes memory _bd = bytes(_d);
bytes memory _be = bytes(_e);
string memory abcde = new string(_ba.length + _bb.length + _bc.length + _bd.length + _be.length);
bytes memory babcde = bytes(abcde);
uint k = 0;
for (uint i = 0; i < _ba.length; i++) babcde[k++] = _ba[i];
for (uint i = 0; i < _bb.length; i++) babcde[k++] = _bb[i];
for (uint i = 0; i < _bc.length; i++) babcde[k++] = _bc[i];
for (uint i = 0; i < _bd.length; i++) babcde[k++] = _bd[i];
for (uint i = 0; i < _be.length; i++) babcde[k++] = _be[i];
return string(babcde);
}
function strConcat(string memory _a, string memory _b, string memory _c, string memory _d) internal pure returns (string memory) {
return strConcat(_a, _b, _c, _d, "");
}
function strConcat(string memory _a, string memory _b, string memory _c) internal pure returns (string memory) {
return strConcat(_a, _b, _c, "", "");
}
function strConcat(string memory _a, string memory _b) internal pure returns (string memory) {
return strConcat(_a, _b, "", "", "");
}
function uint2str(uint _i) internal pure returns (string memory _uintAsString) {
if (_i == 0) {
return "0";
}
uint j = _i;
uint len;
while (j != 0) {
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint k = len - 1;
while (_i != 0) {
bstr[k--] = byte(uint8(48 + _i % 10));
_i /= 10;
}
return string(bstr);
}
}
// File: contracts/ERC1155Tradable.sol
pragma solidity ^0.5.11;
contract OwnableDelegateProxy { }
contract ProxyRegistry {
mapping(address => OwnableDelegateProxy) public proxies;
}
/**
* @title ERC1155Tradable
* ERC1155Tradable - ERC1155 contract that whitelists an operator address, has create and mint functionality, and supports useful standards from OpenZeppelin,
like _exists(), name(), symbol(), and totalSupply()
*/
contract ERC1155Tradable is ERC1155, ERC1155MintBurn, ERC1155Metadata, Ownable {
using Strings for string;
address proxyRegistryAddress;
uint256 private _currentTokenID = 0;
mapping (uint256 => address) public creators;
mapping (uint256 => uint256) public tokenSupply;
// Contract name
string public name;
// Contract symbol
string public symbol;
/**
* @dev Require msg.sender to be the creator of the token id
*/
modifier creatorOnly(uint256 _id) {
require(creators[_id] == msg.sender, "ERC1155Tradable#creatorOnly: ONLY_CREATOR_ALLOWED");
_;
}
/**
* @dev Require msg.sender to own more than 0 of the token id
*/
modifier ownersOnly(uint256 _id) {
require(balances[msg.sender][_id] > 0, "ERC1155Tradable#ownersOnly: ONLY_OWNERS_ALLOWED");
_;
}
constructor(
string memory _name,
string memory _symbol,
address _proxyRegistryAddress
) public {
name = _name;
symbol = _symbol;
proxyRegistryAddress = _proxyRegistryAddress;
}
function uri(
uint256 _id
) public view returns (string memory) {
require(_exists(_id), "ERC721Tradable#uri: NONEXISTENT_TOKEN");
return Strings.strConcat(
baseMetadataURI,
Strings.uint2str(_id)
);
}
/**
* @dev Returns the total quantity for a token ID
* @param _id uint256 ID of the token to query
* @return amount of token in existence
*/
function totalSupply(
uint256 _id
) public view returns (uint256) {
return tokenSupply[_id];
}
/**
* @dev Will update the base URL of token's URI
* @param _newBaseMetadataURI New base URL of token's URI
*/
function setBaseMetadataURI(
string memory _newBaseMetadataURI
) public onlyOwner {
_setBaseMetadataURI(_newBaseMetadataURI);
}
/**
* @dev Creates a new token type and assigns _initialSupply to an address
* NOTE: remove onlyOwner if you want third parties to create new tokens on your contract (which may change your IDs)
* @param _initialOwner address of the first owner of the token
* @param _initialSupply amount to supply the first owner
* @param _uri Optional URI for this token type
* @param _data Data to pass if receiver is contract
* @return The newly created token ID
*/
function create(
address _initialOwner,
uint256 _initialSupply,
string calldata _uri,
bytes calldata _data
) external onlyOwner returns (uint256) {
uint256 _id = _getNextTokenID();
_incrementTokenTypeId();
creators[_id] = msg.sender;
if (bytes(_uri).length > 0) {
emit URI(_uri, _id);
}
_mint(_initialOwner, _id, _initialSupply, _data);
tokenSupply[_id] = _initialSupply;
return _id;
}
/**
* @dev Mints some amount of tokens to an address
* @param _to Address of the future owner of the token
* @param _id Token ID to mint
* @param _quantity Amount of tokens to mint
* @param _data Data to pass if receiver is contract
*/
function mint(
address _to,
uint256 _id,
uint256 _quantity,
bytes memory _data
) public creatorOnly(_id) {
_mint(_to, _id, _quantity, _data);
tokenSupply[_id] += _quantity;
}
/**
* @dev Mint tokens for each id in _ids
* @param _to The address to mint tokens to
* @param _ids Array of ids to mint
* @param _quantities Array of amounts of tokens to mint per id
* @param _data Data to pass if receiver is contract
*/
function batchMint(
address _to,
uint256[] memory _ids,
uint256[] memory _quantities,
bytes memory _data
) public {
for (uint256 i = 0; i < _ids.length; i++) {
uint256 _id = _ids[i];
require(creators[_id] == msg.sender, "ERC1155Tradable#batchMint: ONLY_CREATOR_ALLOWED");
uint256 quantity = _quantities[i];
tokenSupply[_id] += quantity;
}
_batchMint(_to, _ids, _quantities, _data);
}
/**
* Override isApprovedForAll to whitelist user's OpenSea proxy accounts to enable gas-free listings.
*/
function isApprovedForAll(
address _owner,
address _operator
) public view returns (bool isOperator) {
// Whitelist OpenSea proxy contract for easy trading.
ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
if (address(proxyRegistry.proxies(_owner)) == _operator) {
return true;
}
return ERC1155.isApprovedForAll(_owner, _operator);
}
/**
* @dev Returns whether the specified token exists by checking to see if it has a creator
* @param _id uint256 ID of the token to query the existence of
* @return bool whether the token exists
*/
function _exists(
uint256 _id
) internal view returns (bool) {
return creators[_id] != address(0);
}
/**
* @dev calculates the next token ID based on value of _currentTokenID
* @return uint256 for the next token ID
*/
function _getNextTokenID() private view returns (uint256) {
return _currentTokenID.add(1);
}
/**
* @dev increments the value of _currentTokenID
*/
function _incrementTokenTypeId() private {
_currentTokenID++;
}
}
// File: contracts/Wearables.sol
pragma solidity ^0.5.11;
/**
* @title MyCollectible
* MyCollectible - a contract for my semi-fungible tokens.
*/
contract Wearables is ERC1155Tradable {
constructor(address _proxyRegistryAddress) ERC1155Tradable(
"Cryptovoxel Wearables",
"WEAR",
_proxyRegistryAddress
) public {
_setBaseMetadataURI("https://www.cryptovoxels.com/w/");
}
}