Contract Name:
Gh0stlyGh0sts
Contract Source Code:
// File: contracts/interfaces/ILayerZeroUserApplicationConfig.sol
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
// @notice set the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _configType - type of configuration. every messaging library has its own convention.
// @param _config - configuration in the bytes. can encode arbitrary content.
function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
// @notice set the send() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setSendVersion(uint16 _version) external;
// @notice set the lzReceive() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setReceiveVersion(uint16 _version) external;
// @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
// @param _srcChainId - the chainId of the source chain
// @param _srcAddress - the contract address of the source contract at the source chain
function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// File: contracts/interfaces/ILayerZeroEndpoint.sol
pragma solidity >=0.5.0;
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
// @notice send a LayerZero message to the specified address at a LayerZero endpoint.
// @param _dstChainId - the destination chain identifier
// @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
// @param _payload - a custom bytes payload to send to the destination contract
// @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
// @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
// @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
// @notice used by the messaging library to publish verified payload
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source contract (as bytes) at the source chain
// @param _dstAddress - the address on destination chain
// @param _nonce - the unbound message ordering nonce
// @param _gasLimit - the gas limit for external contract execution
// @param _payload - verified payload to send to the destination contract
function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
// @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
// @notice get the outboundNonce from this source chain which, consequently, is always an EVM
// @param _srcAddress - the source chain contract address
function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
// @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
// @param _dstChainId - the destination chain identifier
// @param _userApplication - the user app address on this EVM chain
// @param _payload - the custom message to send over LayerZero
// @param _payInZRO - if false, user app pays the protocol fee in native token
// @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
// @notice get this Endpoint's immutable source identifier
function getChainId() external view returns (uint16);
// @notice the interface to retry failed message on this Endpoint destination
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
// @param _payload - the payload to be retried
function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
// @notice query if any STORED payload (message blocking) at the endpoint.
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
// @notice query if the _libraryAddress is valid for sending msgs.
// @param _userApplication - the user app address on this EVM chain
function getSendLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the _libraryAddress is valid for receiving msgs.
// @param _userApplication - the user app address on this EVM chain
function getReceiveLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the non-reentrancy guard for send() is on
// @return true if the guard is on. false otherwise
function isSendingPayload() external view returns (bool);
// @notice query if the non-reentrancy guard for receive() is on
// @return true if the guard is on. false otherwise
function isReceivingPayload() external view returns (bool);
// @notice get the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _userApplication - the contract address of the user application
// @param _configType - type of configuration. every messaging library has its own convention.
function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
// @notice get the send() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getSendVersion(address _userApplication) external view returns (uint16);
// @notice get the lzReceive() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// File: contracts/interfaces/ILayerZeroReceiver.sol
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
// @notice LayerZero endpoint will invoke this function to deliver the message on the destination
// @param _srcChainId - the source endpoint identifier
// @param _srcAddress - the source sending contract address from the source chain
// @param _nonce - the ordered message nonce
// @param _payload - the signed payload is the UA bytes has encoded to be sent
function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/NonblockingReceiver.sol
pragma solidity ^0.8.6;
abstract contract NonblockingReceiver is Ownable, ILayerZeroReceiver {
ILayerZeroEndpoint internal endpoint;
struct FailedMessages {
uint payloadLength;
bytes32 payloadHash;
}
mapping(uint16 => mapping(bytes => mapping(uint => FailedMessages))) public failedMessages;
mapping(uint16 => bytes) public trustedRemoteLookup;
event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload);
function lzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) external override {
require(msg.sender == address(endpoint)); // boilerplate! lzReceive must be called by the endpoint for security
require(_srcAddress.length == trustedRemoteLookup[_srcChainId].length && keccak256(_srcAddress) == keccak256(trustedRemoteLookup[_srcChainId]),
"NonblockingReceiver: invalid source sending contract");
// try-catch all errors/exceptions
// having failed messages does not block messages passing
try this.onLzReceive(_srcChainId, _srcAddress, _nonce, _payload) {
// do nothing
} catch {
// error / exception
failedMessages[_srcChainId][_srcAddress][_nonce] = FailedMessages(_payload.length, keccak256(_payload));
emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload);
}
}
function onLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) public {
// only internal transaction
require(msg.sender == address(this), "NonblockingReceiver: caller must be Bridge.");
// handle incoming message
_LzReceive( _srcChainId, _srcAddress, _nonce, _payload);
}
// abstract function
function _LzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) virtual internal;
function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _txParam) internal {
endpoint.send{value: msg.value}(_dstChainId, trustedRemoteLookup[_dstChainId], _payload, _refundAddress, _zroPaymentAddress, _txParam);
}
function retryMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes calldata _payload) external payable {
// assert there is message to retry
FailedMessages storage failedMsg = failedMessages[_srcChainId][_srcAddress][_nonce];
require(failedMsg.payloadHash != bytes32(0), "NonblockingReceiver: no stored message");
require(_payload.length == failedMsg.payloadLength && keccak256(_payload) == failedMsg.payloadHash, "LayerZero: invalid payload");
// clear the stored message
failedMsg.payloadLength = 0;
failedMsg.payloadHash = bytes32(0);
// execute the message. revert if it fails again
this.onLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
function setTrustedRemote(uint16 _chainId, bytes calldata _trustedRemote) external onlyOwner {
trustedRemoteLookup[_chainId] = _trustedRemote;
}
}
// File: contracts/GhostlyGhosts.sol
pragma solidity ^0.8.7;
// 0000KKK0000KKKKKKKKKKKKKKKKKKKKKKKKKKK0KKKKKKKKKKKKKK00000KKKKK0K000000000KKKKKKKK0KKK000KKK000KKKK000KKK00000KK0000000000000000KKKKKKKKKKK000KKKKK000
// 00KKK0000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK00000K0xlloxk000000KKKKKKKKKKK00000KK0000KKKK0000KKK0000K000000KK000000000KKKKKKKKKKK0000KKKK000KK
// KKK0000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK00000KOl. ..l000KKKKKKKKKKKKKK0KKK00000KKKK00KKKKKKKKK000000KKKK0000000KKKKKKKKKKK0000KKKKKKKKK00
// K0000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0KKKKKKKKKKKKKK0x;.... .,xKKKKKKKKKKKKK0klcodddddkO0Okkk0KKKKKKKKK00000KKKKKKKKK000KKKKKKKKKK0000KKKKKKKKKK000
// 0000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0KKKKKKKKKKKKKKK0l. .. .oKKKKKKKKKKKK0kc'..',,,,,'''....d0KKKKKK0000KKKKKKKKK0000KKKKKKKKKK00000KKKKKKKKK00KKK
// 00KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0l..;,. :OKKKKKKKKKKKx,'ccldxxxxd;. ....:k0KKKKKKKKKKKKKKK000000KKKKKKKKK0000KKKKKKKKKKKKKKK00
// KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKO, ,o:'''. .'ck0KOxlcclc'.lxxxxxxxxd:';oxdc,';d0KKKKKKKKKKK0000KKKKKKKKKKKK00KKKKKKKKKKK0KKKKK000
// KKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0000KKKKKKKKKKKKKKKKKKKk' ,dl,.:l:,...:c;;:loo:.,dxxxxxxxxxddxxxxxxo,.lkolok0KKK00000KKKKKKKKKKKKKKKKKKKKKKKKK0KKKK00000
// KKKKKKKKKKKKKKKKKKKKKKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKk, ;xdl;':xxdl' ,dxxxxc.,dxxxxxxxxxxxxxxxxxxl..... .l00000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK00000KK
// KKKKKKKKKKKKKKKKKKKKKKKKKK0000KKKKKKKKKK0KKKKKKKKKKKK0: 'xOxdl,:xOkxc. 'cdxxc.'oxxxxxxxxxxxxxxxxxo, .,;.'okk0KKKKKKKKKKKKKKKKKKK00KKKKK000KK00000KKK
// KKKKKKKKKKKKKKKKKKKKKKKK00000KKKKKKKKKK0KKKKKKKKKKKKKKo..ckOkkd,,dkxoc' 'coo;.'cdxxxxxxxxxxxxxxo,. . .....'d0KKKKKKKKKKKKKKKK000KKKK0000000000KKKKK
// KKKKKKKKKKKKKKKKKKKKKKK0000KKKKKKKKK000KKKKKKKKKKKKKKKO: .oOkkOd,'lxxddl,....''...,:ldxxxxxxxxdc..,,.'lc. ,, .oKKKKKKKKKKKKKKKKKKKKKK000KK00000KKKKKK0
// KKKKKKKKKKKKKKKKKKKKK00000KKKKKKKK0000KKKKKKKKKKKKKKKKKk, ,xOkOkx:.;okkOkdlc:,'.. ..,;;::;,. .';,''. .xk,.dKKKKKKKKKKKKKKKKKKKK0000KK0000KKKKKKK00
// KKKKKKKKKKKKKKKKKKKK0000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKo. ;xOkkkko,':dkOOOOOkxoc;;'.. .d0Ok;..;;.;kKKKKKKKKKKKKKKKKKKK000KKK000KKKKKKK0000
// KKKKKKKKKKKKKKKKKK0000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKd,..'dOkkkOkl;',:ldxkkkxolc:;;;;:c;,,,'. .lkkl' .. .:OKKKKKKKKKKKKKKKKK000KKKKKKKKKKKKK0000K
// K000KKKK0KKKKKKK0000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKd;lc..:oxOkkOkxl;'',,,;;;::;,,,'.... .c,.... .oKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK00000KKK
// 0000KK00KKKKKKK0000KKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKKKk;,c' 'coxkOOxc;::c;.......... .:dd:...... .::. .dKKKKKKKKKKKKKKKKKKKKKKKKKKKKK00000KKKK
// 000K000KKKKKK0000KKKKKKKKK00KKKKKKKKKKKKKKKKKKKKKKKKKK0ko,.,cxOd:'..',:cc:clooc;;:;,'..';lkXWMMWKo'... .;:'. .;x0KKKKKKKKKKKKKKKKKKKKKKKKKK00000KKKKKK
// 000000KKKKK00000KKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKK0x:',o0NMMMMWNKOxl;'''',,'',,'.';oOXWMMMMMMMMMXk:...;lc....,kKKKKKKKKKKKKKKKKK00KKKKKK0000KKKK00KK
// K000KKKKKK0000KKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKKKk:':kNMMMMMMMMMMMMMWNXKKXXXXXXXXNWMMMMMMMMMMMMMMMW0d;',,.',.'xKKKKKKKKKKKKKK0000KKKKKK000KKKKKK00KK
// 000KKKKKK00KKKKKKKKK0000KKKKKKKKKKKKKKKKKKKKKKKKK0o,;OWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWO:. .:ok0KKKKKKKKKKKKK0000KKKKK0000KKKKKKKKKKK
// 00KKKK00KKKKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKKK0l'oNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWXo. :OKKKKKKKKKKKKK0000KKKKKK000KKKKKKKKKKKKK
// KKKK000KKKKKKKKKK0000KKKKKKKKKKKKKKKKKKKKKKKKKK0l'oNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNd..dKKKKKKKKKKKK000KKKKKKK00KKKKKKKKKKKKKKK
// K00000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKo'lXMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWk',kKKKKKKKKKK00KKKKKKKKKKKKKKKKKKKKKKKKKK
// 00000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKKKK0OkO00d,cXMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWk''x00KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// 0000KKKKKKKKK000KKKKKKKKKKKKKKKKKKKKK0Kkc..,''..,ldOKWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWXl..o0KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// 00KKKKKKKKK0000KKKKKKKKKKKKKKKKKKKKKKKO:.'x0kddoc,...;xKNMMMMMMMMMMMMMMMMMMMMMMMMMMMMWWNXNNXXXKXNWMMMMWNXKOxlcll.'kKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// 0KKKKKKKKK0000KKKKKK00KKKKKKKKKKKK00K0c.:KNkc,,cxkOkdc:;;ckXNWMMMMMMMMMMMWXK0Odoolc:::::::cc:;;,,ckOxoc;,..,:oKWx.;OKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KKKKKKKK0000KKKKKKKKKKKKKKKKKKKK000KKo.;KXc .:ldkkkdc;',:x0KK00OxdddooooooddxxOO0KKKKK0OOx' .lolodkO0XNN0kx;.:O000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KKKKKKK0000KKKKKKKKKKKKKKKKKKKK00KKKk,,0Xc .':k0d:,',,...,cxKXOxdolcccccloodk0NWMWWWx'oXNWMMMWKxc'.;00,.:k00KKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KKKKK00000KKKKKKKKKKKKKKKKKKK000KKK0:.oWO' .OXkxOKO, 'OWNx,. .'l0NMMXddNMWXkl,..':xXWWk'.cOKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KKK00000KKKKKKKKKKKKKKKKKKKK0KKKKKK0l.:XNo. .xx. .::. :XNl .kWMMKdOKl'.'cd0NMMMMMWk,.cOKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KK0000KKKKKKKKKKKKKKKKKKKKK0KKKKKKKK0l,dWK, 'x:.lkd' ;0Mk. :XMMMX0kdx0NMMMMMMMMMMWk..l0KKKKKKKKKKKKKKKKKKKKKKKKKKKK0
// 00000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKc.lK0o, co.;XW0;.kWMx. ,KMMMMNXWMMMMMMMMMMMMMMNo.'xKKKKKKKKKKKKKKKKKKKKKKKKKK000
// 000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0Kd. :0NXOl'. 'dk'.kMMWd.,OWK, .oNMMWKol0MMMMMMMMMMMMMMMK: ,kKKKKKKKKKKKKKKKKKKKKKKKK000K
// KKKKKKKK00KKKKKKKKKKKKKKKKKKKKKKKKKK0KO,.',,:ldddxxxddxkOO:.lNMMMXl..dXO, .dNMMWk;.lXMMMMMMMMMMMMMMMMk. ;OKKKKKKKKKKKKKKKKKKKKKKKKKKK
// KKKK00000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKd.'0Xxlc;'.,cdl:;'.':kNMMMMWK: ,kKkolc:;,... ...,cxKWMMNo..c0WMMMMMMMMMMMMMMMMWd. :OKKKKKKKKKKKKKKKKKKKKKKKKKK
// KK00000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKo.,KMMMMWXOdc,';ldkKNMMMMMMMWXx;..:ONWWWWNX0OOO0KXWWMMMMNo..lOWMMMMMMMMMMMMMMMMMMNc .l0KKKKKKKKKKKKKKKKKKKKKKKKK
// 000000KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK0l ,KMMMMMMMMMWNWMMMMMMMMMMMMMMMNOo::::ccclc::ccccclooodxocoOXWMMMMMMMMMMMMMMMMMMMNo. 'xKKKKKKKKKKKKKKKKKKKKKKKKK
// 0000KKKKKKKKKKKKKK0Oxollcccodk0KKKKKK0l .OMMMMMMMMMMMMMMMMMMMMMMMMKdd0WMWNK0OOOOkkkkkkkk0KK00O0XMMMMMMMMMMMMMMMMMMMMMMMk' :OKKKKKKKKKKKKKKKKKKKKKKKK
// 000KKKKKKKKK0Okxdl:;;,;::ccl:;:lxOKKKKo.'0MMMMMMMMMMMMMMMMMMMMWWNKo..'lKMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNk; 'xKKKKKKKKKKKKKKKKKKKKKKKK
// 0KKKKKKKKKKk:',,;:coddddoollodo:oOKK00l.,KMMMMMMMMMMMMMMNklcc::;,,,ck0kXMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWx. .,x000KKKKKKKKKKKKKKKKKK00
// KKKKKKKKKKKd.:kkxxdxxddddxO0KKOlo0K00Ko.'0MMMMMMMMMMMMMMW0kkxxkO0KNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNd,.. .lO0KKKKKKKKKKKKKKKKKKK00
// K00KKKKKK0Kk':KWXKKKKKKKKKKKKKkco0K0KKo.,KMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNOdOKl..co. .,d0KKKK00KKKKKKKKKKKKK0
// 000KKKK0KKKO;,0WXKKKKKKKKKKKKKkloOKKKKo.:XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWX0KO, ':'.'x0: :0KKK00KKKKKKKKKKKK000
// 00KK00KKKKKKl.dNNKKKKKKKK00OOkl;ckKK0Kx.,0MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWXKXWMMO,..,..o;...lKd. ;xKKK00KKKKKKKKKKKKK000
// KK0000KKKKKKk,;KNKK0kkOO00Oxc,..,o0KKKx..OW0xdkKWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWx'..;oOo..:,..'. ..xK,.c0K000KKKKKKKKKKKKKKK00
// K000KKKKKKKKKo'dNOolcllccc:ccdkxokKKKKk'.kXl';:co0WMMMMMXdl0WMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWNWMMMMNc ,c:.'l:':,.c:. ,ldKNl ,kK0KKKKKKKKKKKKKKKK000
// 000KKKKKKKK00k,:0xcdkkdoodk0KKKOok0xddo'.dWd,lxdc:oKWMW0;. ;XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMW0:'cOkloOd.'odc.':. .:XNOkXMMMWx..o0KKKKKKKKKKKKKKKK0000
// 000KK0KKKK0000c,OX00000KKKKKKKKOdxc..',:;d0x;:ddddc:O0l. ,,,kMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMX; ''...ll'',. .. ..'lKMMMMMMM0' .lOKKKKKKKKKKKKK000000
// 0KKK00000000KKx;dXKKKKKKKKKKKKK0xd;.;oodl'....';lo:... .,:,.,OWMMMMMMWX0kx0NWMMMMMMMMMMMMMMWWK; ';. .'';OX0x, .. .'..oWMMMMMMK; .lKKKKKKKKKKKKK0000O0
// 0KK00000000KK0x,;o:;;::cllllloddlxx;.;cc, ;dl'...';:;..xXl...:OWMMW0c.. .;lodkNMMXxlodOKklccxx,',. ..'kWMWO;..':;,lKMMMMMMMWo. .c0KKKKKKKKKKKKKK0000
// K00O000000K0d;,,:l'.,:,'.. .,,;;;xK0xc'.....,,.. ,odxx, .;:,:xo;:kW0' ......;;cOWk',lc;..cd,'OO,. .''.:XMMMNOkKXXNWMMMMMMMMWo. ,kKKKKKKKKKKKKK00000
// 00O000000KOc.c0NO:..:dxOOo,.',';oOKKK0c ;oooc' 'okd,..,:o;'OWXd;cc. ,oo' ,od:cX0;,oc' .cl';Kklo'..:l,:KMMMMMMMMMMMMMMMMMMMNo ..oKK000KKKKKKKK0KKKK
// 00000000K0c.dNMMWOl;'',;;,,,,'.'dO00Kk, ,llc;;,'.... .oo;. 'cxOo..:'.,'. .'.:KNo.... .,OWxckc,xkod0WMMMMMMMMMMMMMMMMMMMWd. ..dK000KKKKKKKKKKKKKK
// 0000000KKk',KMMMMMMWNXXKKKKXNNOl',oOKx. oWWX000KK:.;:. .ldc. ..,;.'clc:. .;,'xWO'......'dWMXxolxNMMMMMMMMMMMMMMMMMMMMMMMMMO' 'xK00KKKKKKKKKKKKKKK
// 00000KKKKO,'0MMMMMMMMMMMMMMMMMMWKl';dd..xMMMMMMMWl'lo:;;:l;.';'.;xx:':ccc;',codooOWNkooxOo;cxO0NWMWWMMMMMMMMMMMMMMMMMMMMMMMMMMNl .x00KKKKKKKKKKKKKKKK
// 0000KKKKKKl.dWMMMMMMMMMMMMMMMMMMMWO;.,.'0MMMMMMMWo..cKWNXKxcloll0NXX0kxxxkXWWWNNWMMMMMW0c......';lxKWMMMMMMMMMMMMMMMMMMMMMMMMMMK; ;kKKKKKKKKKKKKKKKKK
// 000KKKKK0KO;'kWMMMMMMMMMMMMMMMMMMMMNx. ,KMMMMMMMWklkNMMMMMMNXXNMMMMMMMMMMMMMMMMMMMMMMWx,:xOO00koc;,;cdONMMMMMMMMMMMMMMMMMMMMMMMW0: .oOKKKKKKKKKKKKKK0
// 00KKKK0KKK0x,'OMMMMMMMMMMMMMMMMMMMMWO, .xMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWx'oNMMMMMMMMMWKOkddkXWMMMMMMMMMMMMMMMMMMMMMMXd. .l0KKKKKKKKKKKK00
// 0KKK00KKK000x,,OWMMMMMMMMMMMMMMMMMMNo. :KMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMX:,KMMMMMMMMMMMMMMWKdldKWMMMMMMMMMMMMMMMMMMMMMNk' .oKKKKKKKKKKKKKK
// KKK00KKK000KKk,'xNMMMMMMMMMMMMMMMMWk' .OMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMK;;XMMMMMMMMMMMMMMMMW0o:dKNWMMMMMMMMMMMMMMMMMMMWd. 'xKKKKKKKKKKKKK
// KK00KK0000KKKKx..kMMMMMMMMMMMMMMMWk' .dWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMK,'0MMMMMMMMMMMMMMMMMMWKxddKMMMMMMMMMMMMMMMMMMMMK, ;OKKKKKKKKKKK0
// KKKKK0000KKKKK0: :XMMMMMMMMMMMMMWk' oNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMK;.cxXMMMMMMMMMMMMMMMMMMMMWWMMMMMMMMMMMMMMMMMMMMWd. .l0KKKKKKKKK00
// KKKK0000KKKKKK0: .xWMMMMMMMMMMMWO' .cXMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWk,. lNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMXc .dKKKKKKKK000
// KKK00000KKKKKK0: :NMMMMMMMMMMW0; cNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMW0; .kWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWO' ;OKKKKK0000K
// KK000000KKKKKK0l .OMMMMMMMMMMXc ;KMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMK, :XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNl .dKKKK0000KK
// K0000000K00KK0Kx' .xMMMMMMMMMNd. ,0MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMx..kMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWx. .oKKK0000KKK
// K000000K000KKKK0l .dMMMMMMMMWO' 'OMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMX; :XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWO' c0K0000KKKK
// K00000K000KKKK0Kx. lNMMMMMMMK; .xWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWo .xMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMk. .lK000KKKKKK
// 00000K000KKKKK0Kx. ;XMMMMMMNo. cNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMd. lWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMk. c000KKKKKK0
// 000KK000KKKKK00Kx. .OMMMMMM0, '0MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMx. ;XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM0, :O0KKKKKK00
// 00K0000KKKKKKKKKx. oWMMMMNo. lNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMk. ;XMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMX: ;OKKKKKKK00
// 0K0000KKKKKK00KKd. ;XMMMMk. ,0MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMO. cNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMX: ;OK0KKKK000
// KK000KKKKKK000K0o. ,KMMMMd .dWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMO. oWMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMWMMMMMMMMMX: :0KKKKK00O0
contract Gh0stlyGh0sts is Ownable, ERC721, NonblockingReceiver {
address public _owner;
string private baseURI;
uint256 nextTokenId = 0;
uint256 MAX_MINT_ETHEREUM = 3084;
uint gasForDestinationLzReceive = 350000;
constructor(string memory baseURI_, address _layerZeroEndpoint) ERC721("Gh0stlyGh0sts", "gg") {
_owner = msg.sender;
endpoint = ILayerZeroEndpoint(_layerZeroEndpoint);
baseURI = baseURI_;
}
// mint function
// you can choose to mint 1 or 2
// mint is free, but payments are accepted
function mint(uint8 numTokens) external payable {
require(numTokens < 3, "GG: Max 2 NFTs per transaction");
require(nextTokenId + numTokens <= MAX_MINT_ETHEREUM, "GG: Mint exceeds supply");
_safeMint(msg.sender, ++nextTokenId);
if (numTokens == 2) {
_safeMint(msg.sender, ++nextTokenId);
}
}
// This function transfers the nft from your address on the
// source chain to the same address on the destination chain
function traverseChains(uint16 _chainId, uint tokenId) public payable {
require(msg.sender == ownerOf(tokenId), "You must own the token to traverse");
require(trustedRemoteLookup[_chainId].length > 0, "This chain is currently unavailable for travel");
// burn NFT, eliminating it from circulation on src chain
_burn(tokenId);
// abi.encode() the payload with the values to send
bytes memory payload = abi.encode(msg.sender, tokenId);
// encode adapterParams to specify more gas for the destination
uint16 version = 1;
bytes memory adapterParams = abi.encodePacked(version, gasForDestinationLzReceive);
// get the fees we need to pay to LayerZero + Relayer to cover message delivery
// you will be refunded for extra gas paid
(uint messageFee, ) = endpoint.estimateFees(_chainId, address(this), payload, false, adapterParams);
require(msg.value >= messageFee, "GG: msg.value not enough to cover messageFee. Send gas for message fees");
endpoint.send{value: msg.value}(
_chainId, // destination chainId
trustedRemoteLookup[_chainId], // destination address of nft contract
payload, // abi.encoded()'ed bytes
payable(msg.sender), // refund address
address(0x0), // 'zroPaymentAddress' unused for this
adapterParams // txParameters
);
}
function setBaseURI(string memory URI) external onlyOwner {
baseURI = URI;
}
function donate() external payable {
// thank you
}
// This allows the devs to receive kind donations
function withdraw(uint amt) external onlyOwner {
(bool sent, ) = payable(_owner).call{value: amt}("");
require(sent, "GG: Failed to withdraw Ether");
}
// just in case this fixed variable limits us from future integrations
function setGasForDestinationLzReceive(uint newVal) external onlyOwner {
gasForDestinationLzReceive = newVal;
}
// ------------------
// Internal Functions
// ------------------
function _LzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) override internal {
// decode
(address toAddr, uint tokenId) = abi.decode(_payload, (address, uint));
// mint the tokens back into existence on destination chain
_safeMint(toAddr, tokenId);
}
function _baseURI() override internal view returns (string memory) {
return baseURI;
}
}