Contract Name:
UlsTokenSupplier
Contract Source Code:
File 1 of 1 : UlsTokenSupplier
/*
_ _ _ _ ___ _____ ____
| | | | \ | |_ _|_ _/ ___|
| | | | \| || | | | \___ \
| |_| | |\ || | | | ___) |
\___/|_| \_|___| |_| |____/
_ ___ __ __ ___ _____ _____ ____
| | |_ _| \/ |_ _|_ _| ____| _ \
| | | || |\/| || | | | | _| | | | |
| |__ | || | | || | | | | |___| |_| |
|____|___|_| |_|___| |_| |_____|____/
____ _ _ ____ ____ _ __ __
/ ___|| | | | _ \| _ \| |\ \ / /
\___ \| | | | |_) | |_) | | \ V /
___) | |_| | __/| __/| |__| |
|____/ \___/|_| |_| |____|_|
*/
// Dependency file: @openzeppelin/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
// pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// Dependency file: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
// pragma solidity ^0.8.0;
// import "@openzeppelin/contracts/utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// Dependency file: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
// pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// Dependency file: @openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
// pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// Dependency file: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
// pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// Dependency file: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)
// pragma solidity ^0.8.0;
// import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
// import "@openzeppelin/contracts/utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
* 0 before setting it to a non-zero value.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// Dependency file: contracts/utils/Lib.sol
// pragma solidity 0.8.23;
/**
* @dev kinds of possible pools.
* @param DEFAULT_VALUE - dummy type for null value.
* @param PRIMARY - blockchain based staking. All rules are declared in the contracts.
*/
enum MintPool {
DEFAULT_VALUE,
PRIMARY
}
/**
* @dev current state of the schedule for each MintPool.
* @param time last invocation time.
* @param itemIndex index of current item in UlsTokenSchedule.items.
* @param yearIndex index of current year in current item in UlsTokenSchedule.items.
* @param yearStartTime start time of the current year.
* @param nextTickSupply amount of Token to be distributed next second.
*/
struct ScheduleState {
uint40 time;
uint8 itemIndex;
uint16 yearIndex;
uint40 yearStartTime;
uint128 nextTickSupply;
}
// Dependency file: contracts/utils/ABDKMath64x64.sol
/*
* ABDK Math 64.64 Smart Contract Library. Copyright © 2019 by ABDK Consulting.
* Author: Mikhail Vladimirov <[email protected]>
* https://github.com/abdk-consulting/abdk-libraries-solidity/blob/master/ABDKMath64x64.sol
*/
// pragma solidity ^0.8.0;
/**
* Smart contract library of mathematical functions operating with signed
* 64.64-bit fixed point numbers. Signed 64.64-bit fixed point number is
* basically a simple fraction whose numerator is signed 128-bit integer and
* denominator is 2^64. As long as denominator is always the same, there is no
* need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
* represented by int128 type holding only the numerator.
*/
library ABDKMath64x64 {
/*
* Minimum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;
/*
* Maximum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
/**
* Convert signed 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromInt(int256 x) internal pure returns (int128) {
unchecked {
require(x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
return int128(x << 64);
}
}
/**
* Convert signed 64.64 fixed point number into signed 64-bit integer number
* rounding down.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64-bit integer number
*/
function toInt(int128 x) internal pure returns (int64) {
unchecked {
return int64(x >> 64);
}
}
/**
* Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromUInt(uint256 x) internal pure returns (int128) {
unchecked {
require(x <= 0x7FFFFFFFFFFFFFFF);
return int128(int256(x << 64));
}
}
/**
* Convert signed 64.64 fixed point number into unsigned 64-bit integer
* number rounding down. Revert on underflow.
*
* @param x signed 64.64-bit fixed point number
* @return unsigned 64-bit integer number
*/
function toUInt(int128 x) internal pure returns (uint64) {
unchecked {
require(x >= 0);
return uint64(uint128(x >> 64));
}
}
/**
* Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
* number rounding down. Revert on overflow.
*
* @param x signed 128.128-bin fixed point number
* @return signed 64.64-bit fixed point number
*/
function from128x128(int256 x) internal pure returns (int128) {
unchecked {
int256 result = x >> 64;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Convert signed 64.64 fixed point number into signed 128.128 fixed point
* number.
*
* @param x signed 64.64-bit fixed point number
* @return signed 128.128 fixed point number
*/
function to128x128(int128 x) internal pure returns (int256) {
unchecked {
return int256(x) << 64;
}
}
/**
* Calculate x + y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function add(int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) + y;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate x - y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sub(int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) - y;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate x * y rounding down. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function mul(int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = (int256(x) * y) >> 64;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
* number and y is signed 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y signed 256-bit integer number
* @return signed 256-bit integer number
*/
function muli(int128 x, int256 y) internal pure returns (int256) {
unchecked {
if (x == MIN_64x64) {
require(
y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
y <= 0x1000000000000000000000000000000000000000000000000
);
return -y << 63;
} else {
bool negativeResult = false;
if (x < 0) {
x = -x;
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint256 absoluteResult = mulu(x, uint256(y));
if (negativeResult) {
require(
absoluteResult <=
0x8000000000000000000000000000000000000000000000000000000000000000
);
return -int256(absoluteResult); // We rely on overflow behavior here
} else {
require(
absoluteResult <=
0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
);
return int256(absoluteResult);
}
}
}
}
/**
* Calculate x * y rounding down, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y unsigned 256-bit integer number
* @return unsigned 256-bit integer number
*/
function mulu(int128 x, uint256 y) internal pure returns (uint256) {
unchecked {
if (y == 0) return 0;
require(x >= 0);
uint256 lo = (uint256(int256(x)) *
(y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
uint256 hi = uint256(int256(x)) * (y >> 128);
require(hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
hi <<= 64;
require(
hi <=
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -
lo
);
return hi + lo;
}
}
/**
* Calculate x / y rounding towards zero. Revert on overflow or when y is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function div(int128 x, int128 y) internal pure returns (int128) {
unchecked {
require(y != 0);
int256 result = (int256(x) << 64) / y;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate x / y rounding towards zero, where x and y are signed 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x signed 256-bit integer number
* @param y signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divi(int256 x, int256 y) internal pure returns (int128) {
unchecked {
require(y != 0);
bool negativeResult = false;
if (x < 0) {
x = -x; // We rely on overflow behavior here
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint128 absoluteResult = divuu(uint256(x), uint256(y));
if (negativeResult) {
require(absoluteResult <= 0x80000000000000000000000000000000);
return -int128(absoluteResult); // We rely on overflow behavior here
} else {
require(absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int128(absoluteResult); // We rely on overflow behavior here
}
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divu(uint256 x, uint256 y) internal pure returns (int128) {
unchecked {
require(y != 0);
uint128 result = divuu(x, y);
require(result <= uint128(MAX_64x64));
return int128(result);
}
}
/**
* Calculate -x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function neg(int128 x) internal pure returns (int128) {
unchecked {
require(x != MIN_64x64);
return -x;
}
}
/**
* Calculate |x|. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function abs(int128 x) internal pure returns (int128) {
unchecked {
require(x != MIN_64x64);
return x < 0 ? -x : x;
}
}
/**
* Calculate 1 / x rounding towards zero. Revert on overflow or when x is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function inv(int128 x) internal pure returns (int128) {
unchecked {
require(x != 0);
int256 result = int256(0x100000000000000000000000000000000) / x;
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function avg(int128 x, int128 y) internal pure returns (int128) {
unchecked {
return int128((int256(x) + int256(y)) >> 1);
}
}
/**
* Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
* Revert on overflow or in case x * y is negative.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function gavg(int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 m = int256(x) * int256(y);
require(m >= 0);
require(
m <
0x4000000000000000000000000000000000000000000000000000000000000000
);
return int128(sqrtu(uint256(m)));
}
}
/**
* Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y uint256 value
* @return signed 64.64-bit fixed point number
*/
function pow(int128 x, uint256 y) internal pure returns (int128) {
unchecked {
bool negative = x < 0 && y & 1 == 1;
uint256 absX = uint128(x < 0 ? -x : x);
uint256 absResult;
absResult = 0x100000000000000000000000000000000;
if (absX <= 0x10000000000000000) {
absX <<= 63;
while (y != 0) {
if (y & 0x1 != 0) {
absResult = (absResult * absX) >> 127;
}
absX = (absX * absX) >> 127;
if (y & 0x2 != 0) {
absResult = (absResult * absX) >> 127;
}
absX = (absX * absX) >> 127;
if (y & 0x4 != 0) {
absResult = (absResult * absX) >> 127;
}
absX = (absX * absX) >> 127;
if (y & 0x8 != 0) {
absResult = (absResult * absX) >> 127;
}
absX = (absX * absX) >> 127;
y >>= 4;
}
absResult >>= 64;
} else {
uint256 absXShift = 63;
if (absX < 0x1000000000000000000000000) {
absX <<= 32;
absXShift -= 32;
}
if (absX < 0x10000000000000000000000000000) {
absX <<= 16;
absXShift -= 16;
}
if (absX < 0x1000000000000000000000000000000) {
absX <<= 8;
absXShift -= 8;
}
if (absX < 0x10000000000000000000000000000000) {
absX <<= 4;
absXShift -= 4;
}
if (absX < 0x40000000000000000000000000000000) {
absX <<= 2;
absXShift -= 2;
}
if (absX < 0x80000000000000000000000000000000) {
absX <<= 1;
absXShift -= 1;
}
uint256 resultShift = 0;
while (y != 0) {
require(absXShift < 64);
if (y & 0x1 != 0) {
absResult = (absResult * absX) >> 127;
resultShift += absXShift;
if (absResult > 0x100000000000000000000000000000000) {
absResult >>= 1;
resultShift += 1;
}
}
absX = (absX * absX) >> 127;
absXShift <<= 1;
if (absX >= 0x100000000000000000000000000000000) {
absX >>= 1;
absXShift += 1;
}
y >>= 1;
}
require(resultShift < 64);
absResult >>= 64 - resultShift;
}
int256 result = negative ? -int256(absResult) : int256(absResult);
require(result >= MIN_64x64 && result <= MAX_64x64);
return int128(result);
}
}
/**
* Calculate sqrt (x) rounding down. Revert if x < 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sqrt(int128 x) internal pure returns (int128) {
unchecked {
require(x >= 0);
return int128(sqrtu(uint256(int256(x)) << 64));
}
}
/**
* Calculate binary logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function log_2(int128 x) internal pure returns (int128) {
unchecked {
require(x > 0);
int256 msb = 0;
int256 xc = x;
if (xc >= 0x10000000000000000) {
xc >>= 64;
msb += 64;
}
if (xc >= 0x100000000) {
xc >>= 32;
msb += 32;
}
if (xc >= 0x10000) {
xc >>= 16;
msb += 16;
}
if (xc >= 0x100) {
xc >>= 8;
msb += 8;
}
if (xc >= 0x10) {
xc >>= 4;
msb += 4;
}
if (xc >= 0x4) {
xc >>= 2;
msb += 2;
}
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
int256 result = (msb - 64) << 64;
uint256 ux = uint256(int256(x)) << uint256(127 - msb);
for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
ux *= ux;
uint256 b = ux >> 255;
ux >>= 127 + b;
result += bit * int256(b);
}
return int128(result);
}
}
/**
* Calculate natural logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function ln(int128 x) internal pure returns (int128) {
unchecked {
require(x > 0);
return
int128(
int256(
(uint256(int256(log_2(x))) *
0xB17217F7D1CF79ABC9E3B39803F2F6AF) >> 128
)
);
}
}
/**
* Calculate binary exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp_2(int128 x) internal pure returns (int128) {
unchecked {
require(x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
uint256 result = 0x80000000000000000000000000000000;
if (x & 0x8000000000000000 > 0)
result = (result * 0x16A09E667F3BCC908B2FB1366EA957D3E) >> 128;
if (x & 0x4000000000000000 > 0)
result = (result * 0x1306FE0A31B7152DE8D5A46305C85EDEC) >> 128;
if (x & 0x2000000000000000 > 0)
result = (result * 0x1172B83C7D517ADCDF7C8C50EB14A791F) >> 128;
if (x & 0x1000000000000000 > 0)
result = (result * 0x10B5586CF9890F6298B92B71842A98363) >> 128;
if (x & 0x800000000000000 > 0)
result = (result * 0x1059B0D31585743AE7C548EB68CA417FD) >> 128;
if (x & 0x400000000000000 > 0)
result = (result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8) >> 128;
if (x & 0x200000000000000 > 0)
result = (result * 0x10163DA9FB33356D84A66AE336DCDFA3F) >> 128;
if (x & 0x100000000000000 > 0)
result = (result * 0x100B1AFA5ABCBED6129AB13EC11DC9543) >> 128;
if (x & 0x80000000000000 > 0)
result = (result * 0x10058C86DA1C09EA1FF19D294CF2F679B) >> 128;
if (x & 0x40000000000000 > 0)
result = (result * 0x1002C605E2E8CEC506D21BFC89A23A00F) >> 128;
if (x & 0x20000000000000 > 0)
result = (result * 0x100162F3904051FA128BCA9C55C31E5DF) >> 128;
if (x & 0x10000000000000 > 0)
result = (result * 0x1000B175EFFDC76BA38E31671CA939725) >> 128;
if (x & 0x8000000000000 > 0)
result = (result * 0x100058BA01FB9F96D6CACD4B180917C3D) >> 128;
if (x & 0x4000000000000 > 0)
result = (result * 0x10002C5CC37DA9491D0985C348C68E7B3) >> 128;
if (x & 0x2000000000000 > 0)
result = (result * 0x1000162E525EE054754457D5995292026) >> 128;
if (x & 0x1000000000000 > 0)
result = (result * 0x10000B17255775C040618BF4A4ADE83FC) >> 128;
if (x & 0x800000000000 > 0)
result = (result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB) >> 128;
if (x & 0x400000000000 > 0)
result = (result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9) >> 128;
if (x & 0x200000000000 > 0)
result = (result * 0x10000162E43F4F831060E02D839A9D16D) >> 128;
if (x & 0x100000000000 > 0)
result = (result * 0x100000B1721BCFC99D9F890EA06911763) >> 128;
if (x & 0x80000000000 > 0)
result = (result * 0x10000058B90CF1E6D97F9CA14DBCC1628) >> 128;
if (x & 0x40000000000 > 0)
result = (result * 0x1000002C5C863B73F016468F6BAC5CA2B) >> 128;
if (x & 0x20000000000 > 0)
result = (result * 0x100000162E430E5A18F6119E3C02282A5) >> 128;
if (x & 0x10000000000 > 0)
result = (result * 0x1000000B1721835514B86E6D96EFD1BFE) >> 128;
if (x & 0x8000000000 > 0)
result = (result * 0x100000058B90C0B48C6BE5DF846C5B2EF) >> 128;
if (x & 0x4000000000 > 0)
result = (result * 0x10000002C5C8601CC6B9E94213C72737A) >> 128;
if (x & 0x2000000000 > 0)
result = (result * 0x1000000162E42FFF037DF38AA2B219F06) >> 128;
if (x & 0x1000000000 > 0)
result = (result * 0x10000000B17217FBA9C739AA5819F44F9) >> 128;
if (x & 0x800000000 > 0)
result = (result * 0x1000000058B90BFCDEE5ACD3C1CEDC823) >> 128;
if (x & 0x400000000 > 0)
result = (result * 0x100000002C5C85FE31F35A6A30DA1BE50) >> 128;
if (x & 0x200000000 > 0)
result = (result * 0x10000000162E42FF0999CE3541B9FFFCF) >> 128;
if (x & 0x100000000 > 0)
result = (result * 0x100000000B17217F80F4EF5AADDA45554) >> 128;
if (x & 0x80000000 > 0)
result = (result * 0x10000000058B90BFBF8479BD5A81B51AD) >> 128;
if (x & 0x40000000 > 0)
result = (result * 0x1000000002C5C85FDF84BD62AE30A74CC) >> 128;
if (x & 0x20000000 > 0)
result = (result * 0x100000000162E42FEFB2FED257559BDAA) >> 128;
if (x & 0x10000000 > 0)
result = (result * 0x1000000000B17217F7D5A7716BBA4A9AE) >> 128;
if (x & 0x8000000 > 0)
result = (result * 0x100000000058B90BFBE9DDBAC5E109CCE) >> 128;
if (x & 0x4000000 > 0)
result = (result * 0x10000000002C5C85FDF4B15DE6F17EB0D) >> 128;
if (x & 0x2000000 > 0)
result = (result * 0x1000000000162E42FEFA494F1478FDE05) >> 128;
if (x & 0x1000000 > 0)
result = (result * 0x10000000000B17217F7D20CF927C8E94C) >> 128;
if (x & 0x800000 > 0)
result = (result * 0x1000000000058B90BFBE8F71CB4E4B33D) >> 128;
if (x & 0x400000 > 0)
result = (result * 0x100000000002C5C85FDF477B662B26945) >> 128;
if (x & 0x200000 > 0)
result = (result * 0x10000000000162E42FEFA3AE53369388C) >> 128;
if (x & 0x100000 > 0)
result = (result * 0x100000000000B17217F7D1D351A389D40) >> 128;
if (x & 0x80000 > 0)
result = (result * 0x10000000000058B90BFBE8E8B2D3D4EDE) >> 128;
if (x & 0x40000 > 0)
result = (result * 0x1000000000002C5C85FDF4741BEA6E77E) >> 128;
if (x & 0x20000 > 0)
result = (result * 0x100000000000162E42FEFA39FE95583C2) >> 128;
if (x & 0x10000 > 0)
result = (result * 0x1000000000000B17217F7D1CFB72B45E1) >> 128;
if (x & 0x8000 > 0)
result = (result * 0x100000000000058B90BFBE8E7CC35C3F0) >> 128;
if (x & 0x4000 > 0)
result = (result * 0x10000000000002C5C85FDF473E242EA38) >> 128;
if (x & 0x2000 > 0)
result = (result * 0x1000000000000162E42FEFA39F02B772C) >> 128;
if (x & 0x1000 > 0)
result = (result * 0x10000000000000B17217F7D1CF7D83C1A) >> 128;
if (x & 0x800 > 0)
result = (result * 0x1000000000000058B90BFBE8E7BDCBE2E) >> 128;
if (x & 0x400 > 0)
result = (result * 0x100000000000002C5C85FDF473DEA871F) >> 128;
if (x & 0x200 > 0)
result = (result * 0x10000000000000162E42FEFA39EF44D91) >> 128;
if (x & 0x100 > 0)
result = (result * 0x100000000000000B17217F7D1CF79E949) >> 128;
if (x & 0x80 > 0)
result = (result * 0x10000000000000058B90BFBE8E7BCE544) >> 128;
if (x & 0x40 > 0)
result = (result * 0x1000000000000002C5C85FDF473DE6ECA) >> 128;
if (x & 0x20 > 0)
result = (result * 0x100000000000000162E42FEFA39EF366F) >> 128;
if (x & 0x10 > 0)
result = (result * 0x1000000000000000B17217F7D1CF79AFA) >> 128;
if (x & 0x8 > 0)
result = (result * 0x100000000000000058B90BFBE8E7BCD6D) >> 128;
if (x & 0x4 > 0)
result = (result * 0x10000000000000002C5C85FDF473DE6B2) >> 128;
if (x & 0x2 > 0)
result = (result * 0x1000000000000000162E42FEFA39EF358) >> 128;
if (x & 0x1 > 0)
result = (result * 0x10000000000000000B17217F7D1CF79AB) >> 128;
result >>= uint256(int256(63 - (x >> 64)));
require(result <= uint256(int256(MAX_64x64)));
return int128(int256(result));
}
}
/**
* Calculate natural exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp(int128 x) internal pure returns (int128) {
unchecked {
require(x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
return
exp_2(
int128(
(int256(x) * 0x171547652B82FE1777D0FFDA0D23A7D12) >> 128
)
);
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return unsigned 64.64-bit fixed point number
*/
function divuu(uint256 x, uint256 y) private pure returns (uint128) {
unchecked {
require(y != 0);
uint256 result;
if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
result = (x << 64) / y;
else {
uint256 msb = 192;
uint256 xc = x >> 192;
if (xc >= 0x100000000) {
xc >>= 32;
msb += 32;
}
if (xc >= 0x10000) {
xc >>= 16;
msb += 16;
}
if (xc >= 0x100) {
xc >>= 8;
msb += 8;
}
if (xc >= 0x10) {
xc >>= 4;
msb += 4;
}
if (xc >= 0x4) {
xc >>= 2;
msb += 2;
}
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
result = (x << (255 - msb)) / (((y - 1) >> (msb - 191)) + 1);
require(result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 hi = result * (y >> 128);
uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 xh = x >> 192;
uint256 xl = x << 64;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
lo = hi << 128;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
result += xh == hi >> 128 ? xl / y : 1;
}
require(result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return uint128(result);
}
}
/**
* Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
* number.
*
* @param x unsigned 256-bit integer number
* @return unsigned 128-bit integer number
*/
function sqrtu(uint256 x) private pure returns (uint128) {
unchecked {
if (x == 0) return 0;
else {
uint256 xx = x;
uint256 r = 1;
if (xx >= 0x100000000000000000000000000000000) {
xx >>= 128;
r <<= 64;
}
if (xx >= 0x10000000000000000) {
xx >>= 64;
r <<= 32;
}
if (xx >= 0x100000000) {
xx >>= 32;
r <<= 16;
}
if (xx >= 0x10000) {
xx >>= 16;
r <<= 8;
}
if (xx >= 0x100) {
xx >>= 8;
r <<= 4;
}
if (xx >= 0x10) {
xx >>= 4;
r <<= 2;
}
if (xx >= 0x4) {
r <<= 1;
}
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1; // Seven iterations should be enough
uint256 r1 = x / r;
return uint128(r < r1 ? r : r1);
}
}
}
}
// Dependency file: contracts/interfaces/ITokenSchedule.sol
// pragma solidity 0.8.23;
// import "contracts/utils/Lib.sol";
interface ITokenSchedule {
/**
* @dev Calculates changes in scheduleState based on the time passed from
* last update and returns updated state and amount of Token to be minted.
*/
function makeProgress(
ScheduleState memory scheduleState,
uint40 time,
MintPool pool
) external view returns (uint256 tokenSupply, ScheduleState memory);
}
// Dependency file: contracts/interfaces/ITokenSupplier.sol
// pragma solidity 0.8.23;
/**
* @dev Interface to got minted Token.
*/
interface ITokenSupplier {
/**
* @dev If caller is owner of any mint pool it will be supplied with UlsToken
* based on the schedule and time passed from the moment
* when the method was invoked by the same mint pool owner last time.
* @param maxTime The upper limit of the time to make calculations.
*/
function supplyToken(uint40 maxTime) external returns (uint256);
function supplyTokenView(
uint40 maxTime
) external view returns (uint256 supply);
}
// Root file: contracts/UlsTokenSupplier.sol
pragma solidity 0.8.23;
// import "@openzeppelin/contracts/access/Ownable.sol";
// import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
// import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
// import "contracts/utils/Lib.sol";
// import "contracts/utils/ABDKMath64x64.sol";
// import "contracts/interfaces/ITokenSchedule.sol";
// import "contracts/interfaces/ITokenSupplier.sol";
contract UlsTokenSupplier is Ownable, ITokenSupplier {
using ABDKMath64x64 for int128;
using SafeERC20 for IERC20;
// 365 days = 365 * 24 * 60 * 60 = 31536000 seconds
uint40 public constant YEAR_DURATION = 365 * 24 * 60 * 60;
/// @dev UlsToken contract
IERC20 public immutable token;
/// @dev UlsTokenSchedule contract
ITokenSchedule public immutable tokenSchedule;
ScheduleState public tokenScheduleState;
/// @dev UlsTokenStaking contract
address public tokenStaking;
int128 public immutable tokenStakingShare;
constructor(address token_, address tokenSchedule_) {
token = IERC20(token_);
tokenSchedule = ITokenSchedule(tokenSchedule_);
// ABDKMath64x64.fromInt(1) = 18446744073709551616
tokenStakingShare = 18446744073709551616;
tokenScheduleState.time = 0;
tokenScheduleState.yearStartTime = 0;
tokenScheduleState.nextTickSupply =
2_360_679_774997896964574700 /
YEAR_DURATION;
}
function setTokenStaking(address tokenStaking_) external onlyOwner {
require(
tokenStaking == address(0),
"UlsTokenSupplier: staking already set"
);
require(tokenStaking_ != address(0), "UlsTokenSupplier: zero address");
tokenStaking = tokenStaking_;
}
function setStartTime(uint40 startTime) external onlyOwner {
require(
tokenScheduleState.time == 0,
"UlsTokenSupplier: start time already set"
);
require(
startTime >= uint40(block.timestamp),
"UlsTokenSupplier: incorrect start time"
);
tokenScheduleState.time = startTime;
tokenScheduleState.yearStartTime = startTime;
}
function supplyToken(
uint40 maxTime
) external override returns (uint256 supply) {
if (_msgSender() != tokenStaking) return 0;
uint256 supplyTotal = _supplyToken(maxTime);
supply = ABDKMath64x64.mulu(tokenStakingShare, supplyTotal);
token.safeTransfer(_msgSender(), supply);
return supply;
}
function supplyTokenView(
uint40 maxTime
) external view override returns (uint256 supply) {
if (_msgSender() != tokenStaking) return 0;
uint256 supplyTotal = _supplyTokenView(maxTime);
supply = ABDKMath64x64.mulu(tokenStakingShare, supplyTotal);
return supply;
}
/**
* @dev if caller is owner of any mint pool it will be supplied with Token
* based on the schedule and time passed from the moment
* when the method was invoked by the same mint pool owner last time.
* @param maxTime the upper limit of the time to make calculations.
*/
function _supplyToken(uint40 maxTime) private returns (uint256) {
if (tokenScheduleState.time == 0) {
return 0;
}
if (maxTime > uint40(block.timestamp)) {
maxTime = uint40(block.timestamp);
}
(uint256 supply, ScheduleState memory newState) = tokenSchedule
.makeProgress(tokenScheduleState, maxTime, MintPool.PRIMARY);
tokenScheduleState = newState;
return supply;
}
function _supplyTokenView(uint40 maxTime) private view returns (uint256) {
if (tokenScheduleState.time == 0) {
return 0;
}
if (maxTime > uint40(block.timestamp)) {
maxTime = uint40(block.timestamp);
}
ScheduleState memory state = tokenScheduleState;
(uint256 supply, ) = tokenSchedule.makeProgress(
state,
maxTime,
MintPool.PRIMARY
);
return supply;
}
/// @dev View function to support displaying PRIMARY POOL daily supply on UI.
function rewardRate() external view returns (uint256) {
if (tokenScheduleState.time == 0) {
return 0;
}
(, ScheduleState memory newState) = tokenSchedule.makeProgress(
tokenScheduleState,
uint40(block.timestamp),
MintPool.PRIMARY
);
return uint256(newState.nextTickSupply);
}
}