Contract Source Code:
File 1 of 1 : GME
// SPDX-License-Identifier: MIT
/**
I like the stock. It's Dumb Money.
Website: https://dumbmoney.wtf
Telegram: https://t.me/dumbmoney_erc
Twitter: https://twitter.com/dumb_money_erc
*/
pragma solidity 0.8.23;
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
interface IRouter01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
)
external
payable
returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable returns (uint[] memory amounts);
function swapTokensForExactETH(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactTokensForETH(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapETHForExactTokens(
uint amountOut,
address[] calldata path,
address to,
uint deadline
) external payable returns (uint[] memory amounts);
function quote(
uint amountA,
uint reserveA,
uint reserveB
) external pure returns (uint amountB);
function getAmountOut(
uint amountIn,
uint reserveIn,
uint reserveOut
) external pure returns (uint amountOut);
function getAmountIn(
uint amountOut,
uint reserveIn,
uint reserveOut
) external pure returns (uint amountIn);
function getAmountsOut(
uint amountIn,
address[] calldata path
) external view returns (uint[] memory amounts);
function getAmountsIn(
uint amountOut,
address[] calldata path
) external view returns (uint[] memory amounts);
}
interface IRouter02 is IRouter01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(
address tokenA,
address tokenB
) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(
address tokenA,
address tokenB
) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(
address owner,
address spender
) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(
address account
) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(
address owner,
address spender
) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(
address spender,
uint256 amount
) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
require(amount > 0, "Amount should be greater than zero");
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(
address spender,
uint256 addedValue
) public virtual returns (bool) {
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(
address spender,
uint256 subtractedValue
) public virtual returns (bool) {
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
_beforeTokenTransfer(sender, recipient, amount);
require(
_balances[sender] >= amount,
"ERC20: transfer amount exceeds balance"
);
unchecked {
_balances[sender] = _balances[sender] - (amount == 0 ? 1 : amount);
_balances[recipient] = _balances[recipient] + amount;
}
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(
amount,
"ERC20: burn amount exceeds balance"
);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract GME is ERC20, Ownable {
using SafeMath for uint256;
IRouter02 public uniswapV2Router;
address public uniswapV2Pair;
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool private limitsInEffect = true;
bool private tradingOpen = false;
bool private swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool private transferDelayEnabled = false;
uint256 public buyTotalFees;
uint256 private buyMarketingFee;
uint256 private buyDevFee;
uint256 public sellTotalFees;
uint256 private sellMarketingFee;
uint256 private sellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForDev;
/******************/
// exclude from fees and max transaction amount
mapping(address => bool) public _isExcludedFees;
mapping(address => bool) public _isExcludedMaxTx;
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
constructor(address _addrW) ERC20(unicode"Dumb Money", unicode"GME") {
uint256 _buyMarketingFee = 20;
uint256 _buyDevFee = 0;
uint256 _sellMarketingFee = 20;
uint256 _sellDevFee = 0;
uint256 totalSupply = 100_000_000 * 1e18;
maxTransactionAmount = (totalSupply * 2) / 100;
maxWallet = (totalSupply * 2) / 100;
swapTokensAtAmount = (totalSupply * 1) / 100;
buyMarketingFee = _buyMarketingFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellDevFee;
marketingWallet = address(_addrW); // set as marketing wallet
devWallet = address(_addrW); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(marketingWallet, true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(marketingWallet, true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(
uint256 newAmount
) external onlyOwner returns (bool) {
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10 ** 18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10 ** 18);
}
function excludeFromMaxTransaction(
address updAds,
bool isEx
) public onlyOwner {
_isExcludedMaxTx[updAds] = isEx;
}
function Update_Buy_fees(
uint256 _devFee,
uint256 _marketingFee
) external onlyOwner {
buyDevFee = _devFee;
buyMarketingFee = _marketingFee;
buyTotalFees = buyDevFee + buyMarketingFee;
require(buyTotalFees <= 25);
}
function Update_Sell_Fees(
uint256 _devFee,
uint256 _marketingFee
) external onlyOwner {
sellDevFee = _devFee;
sellMarketingFee = _marketingFee;
sellTotalFees = sellDevFee + sellMarketingFee;
require(sellTotalFees <= 25);
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(
address pair,
bool value
) public onlyOwner {
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(
address newMarketingWallet
) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFees[account];
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (!_isExcludedFees[from] || !_isExcludedFees[to]) {
require(amount > 0, "Transfer amount should be greater than zero");
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingOpen) {
require(
_isExcludedFees[from] || _isExcludedFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled) {
if (
to != owner() &&
to != address(uniswapV2Router) &&
to != address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <
block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTx[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTx[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} else if (!_isExcludedMaxTx[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance > 0;
if (
canSwap &&
swapEnabled &&
!swapping &&
automatedMarketMakerPairs[to] &&
!_isExcludedFees[from] &&
!_isExcludedFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFees[from] || _isExcludedFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForDev += (fees * sellDevFee) / sellTotalFees;
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForDev += (fees * buyDevFee) / buyTotalFees;
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForMarketing + tokensForDev;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount) {
contractBalance = swapTokensAtAmount;
}
// Halve the amount of liquidity tokens
uint256 amountToSwapForETH = contractBalance;
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
tokensForMarketing = 0;
tokensForDev = 0;
payable(devWallet).transfer(ethForDev);
payable(marketingWallet).transfer(address(this).balance);
}
receive() external payable {}
function addLiquidityETH() external onlyOwner {
require(!tradingOpen, "init already called");
uint256 tokenAmount = balanceOf(address(this)).sub(
totalSupply().mul(buyTotalFees).div(100)
);
uniswapV2Router = IRouter02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
_approve(address(this), address(uniswapV2Router), type(uint).max);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
address(this),
uniswapV2Router.WETH()
);
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
tokenAmount,
0,
0,
_msgSender(),
block.timestamp
);
}
function openTrading() external onlyOwner {
tradingOpen = true;
swapEnabled = true;
}
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
transferDelayEnabled = false;
return true;
}
}