Contract Name:
ERC20ByMetadrop
Contract Source Code:
File 1 of 1 : ERC20ByMetadrop
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@B7~&@@@@@@@@@@@@@@@@G!:&@@@@@@@@@@@@@@@&5~.&@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&P~ P@@@@@@@@@@@@&Y^ G@@@@@@@@@@@@#J: G@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#J: G@@@@@@@@@B7. G@@@@@@@@&G!. G@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@G!. G@@@@@&P~ B@@@@@&Y: G@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@&Y^ ~&&#J: ^#&B7. G@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@#7. &@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@G ^5&@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@J ^5&@&: ~P&@&: .7B@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@J .!G@@@@@@J .?B@@@@@@J :Y#@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@J :J#@@@@@@@@@J ^5&@@@@@@@@@? .~P&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@J ~P&@@@@@@@@@@@@J .7B@@@@@@@@@@@@@? :?#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@B^?B@@@@@@@@@@@@@@@@B~J#@@@@@@@@@@@@@@@@#!5&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//
// Telegram: t.me/asscoin_eth
// Twitter: twitter.com/asscoin_eth
// Website: https://asscoin.lol/
//
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@ @@
// @@ This token was launched using software provided by Metadrop. To learn more or to launch @@
// @@ your own token, visit: https://metadrop.com. See legal info at the end of this file. @@
// @@ @@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//
// SPDX-License-Identifier: BUSL-1.1
// Metadrop Contracts (v2.1.0)
//// Sources flattened with hardhat v2.17.2 https://hardhat.org
// File @openzeppelin/contracts/token/ERC20/[email protected]
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @uniswap/v2-periphery/contracts/interfaces/[email protected]
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// File @uniswap/v2-periphery/contracts/interfaces/[email protected]
pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/utils/structs/[email protected]
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```solidity
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// File @uniswap/v2-core/contracts/interfaces/[email protected]
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// File contracts/ERC20Factory/ERC20/IERC20ConfigByMetadrop.sol
// Metadrop Contracts (v2.1.0)
/**
*
* @title IERC20ByMetadrop.sol. Interface for metadrop ERC20 standard
*
* @author metadrop
*
*/
pragma solidity 0.8.21;
interface IERC20ConfigByMetadrop {
enum VaultType {
unicrypt,
metavault
}
struct ERC20Config {
bytes baseParameters;
bytes supplyParameters;
bytes taxParameters;
bytes poolParameters;
}
struct ERC20BaseParameters {
string name;
string symbol;
bool addLiquidityOnCreate;
bool usesDRIPool;
}
struct ERC20SupplyParameters {
uint256 maxSupply;
uint256 lpSupply;
uint256 projectSupply;
uint256 maxTokensPerWallet;
uint256 maxTokensPerTxn;
uint256 lpLockupInDays;
uint256 botProtectionDurationInSeconds;
address projectSupplyRecipient;
address projectLPOwner;
bool burnLPTokens;
}
struct ERC20TaxParameters {
uint256 projectBuyTaxBasisPoints;
uint256 projectSellTaxBasisPoints;
uint256 taxSwapThresholdBasisPoints;
uint256 metadropBuyTaxBasisPoints;
uint256 metadropSellTaxBasisPoints;
uint256 metadropTaxPeriodInDays;
address projectTaxRecipient;
address metadropTaxRecipient;
}
struct ERC20PoolParameters {
uint256 poolSupply;
uint256 poolStartDate;
uint256 poolEndDate;
uint256 poolVestingInDays;
uint256 poolMaxETH;
uint256 poolPerAddressMaxETH;
uint256 poolMinETH;
uint256 poolPerTransactionMinETH;
}
}
// File contracts/Global/IConfigStructures.sol
// Metadrop Contracts (v2.1.0)
/**
*
* @title IConfigStructures.sol. Interface for common config structures used accross the platform
*
* @author metadrop
*
*/
pragma solidity 0.8.21;
interface IConfigStructures {
enum DropStatus {
approved,
deployed,
cancelled
}
enum TemplateStatus {
live,
terminated
}
// The current status of the mint:
// - notEnabled: This type of mint is not part of this drop
// - notYetOpen: This type of mint is part of the drop, but it hasn't started yet
// - open: it's ready for ya, get in there.
// - finished: been and gone.
// - unknown: theoretically impossible.
enum MintStatus {
notEnabled,
notYetOpen,
open,
finished,
unknown
}
struct SubListConfig {
uint256 start;
uint256 end;
uint256 phaseMaxSupply;
}
struct PrimarySaleModuleInstance {
address instanceAddress;
string instanceDescription;
}
struct NFTModuleConfig {
uint256 templateId;
bytes configData;
bytes vestingData;
}
struct PrimarySaleModuleConfig {
uint256 templateId;
bytes configData;
}
struct ProjectBeneficiary {
address payable payeeAddress;
uint256 payeeShares;
}
struct VestingConfig {
uint256 start;
uint256 projectUpFrontShare;
uint256 projectVestedShare;
uint256 vestingPeriodInDays;
uint256 vestingCliff;
ProjectBeneficiary[] projectPayees;
}
struct RoyaltySplitterModuleConfig {
uint256 templateId;
bytes configData;
}
struct InLifeModuleConfig {
uint256 templateId;
bytes configData;
}
struct InLifeModules {
InLifeModuleConfig[] modules;
}
struct NFTConfig {
uint256 supply;
string name;
string symbol;
bytes32 positionProof;
bool includePriorPhasesInMintTracking;
bool singleMetadataCollection;
uint256 reservedAllocation;
uint256 assistanceRequestWindowInSeconds;
}
struct Template {
TemplateStatus status;
uint16 templateNumber;
uint32 loadedDate;
address payable templateAddress;
string templateDescription;
}
struct RoyaltyDetails {
address newRoyaltyPaymentSplitterInstance;
uint96 royaltyFromSalesInBasisPoints;
}
struct SignedDropMessageDetails {
uint256 messageTimeStamp;
bytes32 messageHash;
bytes messageSignature;
}
}
// File contracts/ERC20Factory/ERC20/IERC20ByMetadrop.sol
// Metadrop Contracts (v2.1.0)
pragma solidity 0.8.21;
/**
* @dev Metadrop core ERC-20 contract, interface
*/
interface IERC20ByMetadrop is
IConfigStructures,
IERC20,
IERC20ConfigByMetadrop,
IERC20Metadata
{
event AutoSwapThresholdUpdated(uint256 oldThreshold, uint256 newThreshold);
event ExternalCallError(uint256 identifier);
event InitialLiquidityAdded(uint256 tokenA, uint256 tokenB, uint256 lpToken);
event LimitsUpdated(
uint256 oldMaxTokensPerTransaction,
uint256 newMaxTokensPerTransaction,
uint256 oldMaxTokensPerWallet,
uint256 newMaxTokensPerWallet
);
event LiquidityLocked(uint256 lpTokens, uint256 lpLockupInDays);
event LiquidityBurned(uint256 lpTokens);
event LiquidityPoolCreated(address addedPool);
event LiquidityPoolAdded(address addedPool);
event LiquidityPoolRemoved(address removedPool);
event MetadropTaxBasisPointsChanged(
uint256 oldBuyBasisPoints,
uint256 newBuyBasisPoints,
uint256 oldSellBasisPoints,
uint256 newSellBasisPoints
);
event ProjectTaxBasisPointsChanged(
uint256 oldBuyBasisPoints,
uint256 newBuyBasisPoints,
uint256 oldSellBasisPoints,
uint256 newSellBasisPoints
);
event RevenueAutoSwap();
event ProjectTaxRecipientUpdated(address treasury);
event UnlimitedAddressAdded(address addedUnlimted);
event UnlimitedAddressRemoved(address removedUnlimted);
event ValidCallerAdded(bytes32 addedValidCaller);
event ValidCallerRemoved(bytes32 removedValidCaller);
/**
* @dev function {addInitialLiquidity}
*
* Add initial liquidity to the uniswap pair
*
* @param vaultFee_ The vault fee in wei. This must match the required fee from the external vault contract.
* @param lpLockupInDaysOverride_ The number of days to lock liquidity NOTE you can pass 0 to use the stored value.
* This value is an override, and will override a stored value which is LOWER that it. If the value you are passing is
* LOWER than the stored value the stored value will not be reduced.
*
* Example usage 1: When creating the coin the lpLockupInDays is set to 0. This means that on this call the
* user can set the lockup to any value they like, as all integer values greater than zero will be used to override
* that set in storage.
*
* Example usage 2: When using a DRI Pool the lockup period is set on this contract and the pool need not know anything
* about this setting. The pool can pass back a 0 on this call and know that the existing value stored on this contract
* will be used.
* @param burnLPTokensOverride_ If the LP tokens should be burned (otherwise they are locked). This is an override field
* that can ONLY be used to override a held value of FALSE with a new value of TRUE.
*
* Example usage 1: When creating the coin the user didn't add liquidity, or specify that the LP tokens were to be burned.
* So burnLPTokens is held as FALSE. When they add liquidity they want to lock tokens, so they pass this in as FALSE again,
* and it remains FALSE.
*
* Example usage 2: As above, but when later adding liquidity the user wants to burn the LP. So the stored value is FALSE
* and the user passes TRUE into this method. The TRUE overrides the held value of FALSE and the tokens are burned.
*
* Example uusage 3: The user is using a DRI pool and they have specified on the coin creation that the LP tokens are to
* be burned. This contract therefore holds TRUE for burnLPTokens. The DRI pool does not need to know what the user has
* selected. It can safely pass back FALSE to this method call and the stored value of TRUE will remain, resulting in the
* LP tokens being burned.
*/
function addInitialLiquidity(
uint256 vaultFee_,
uint256 lpLockupInDaysOverride_,
bool burnLPTokensOverride_
) external payable;
/**
* @dev function {isLiquidityPool}
*
* Return if an address is a liquidity pool
*
* @param queryAddress_ The address being queried
* @return bool The address is / isn't a liquidity pool
*/
function isLiquidityPool(address queryAddress_) external view returns (bool);
/**
* @dev function {liquidityPools}
*
* Returns a list of all liquidity pools
*
* @return liquidityPools_ a list of all liquidity pools
*/
function liquidityPools()
external
view
returns (address[] memory liquidityPools_);
/**
* @dev function {addLiquidityPool} onlyOwner
*
* Allows the manager to add a liquidity pool to the pool enumerable set
*
* @param newLiquidityPool_ The address of the new liquidity pool
*/
function addLiquidityPool(address newLiquidityPool_) external;
/**
* @dev function {removeLiquidityPool} onlyOwner
*
* Allows the manager to remove a liquidity pool
*
* @param removedLiquidityPool_ The address of the old removed liquidity pool
*/
function removeLiquidityPool(address removedLiquidityPool_) external;
/**
* @dev function {isUnlimited}
*
* Return if an address is unlimited (is not subject to per txn and per wallet limits)
*
* @param queryAddress_ The address being queried
* @return bool The address is / isn't unlimited
*/
function isUnlimited(address queryAddress_) external view returns (bool);
/**
* @dev function {unlimitedAddresses}
*
* Returns a list of all unlimited addresses
*
* @return unlimitedAddresses_ a list of all unlimited addresses
*/
function unlimitedAddresses()
external
view
returns (address[] memory unlimitedAddresses_);
/**
* @dev function {addUnlimited} onlyOwner
*
* Allows the manager to add an unlimited address
*
* @param newUnlimited_ The address of the new unlimited address
*/
function addUnlimited(address newUnlimited_) external;
/**
* @dev function {removeUnlimited} onlyOwner
*
* Allows the manager to remove an unlimited address
*
* @param removedUnlimited_ The address of the old removed unlimited address
*/
function removeUnlimited(address removedUnlimited_) external;
/**
* @dev function {isValidCaller}
*
* Return if an address is a valid caller
*
* @param queryHash_ The code hash being queried
* @return bool The address is / isn't a valid caller
*/
function isValidCaller(bytes32 queryHash_) external view returns (bool);
/**
* @dev function {validCallers}
*
* Returns a list of all valid caller code hashes
*
* @return validCallerHashes_ a list of all valid caller code hashes
*/
function validCallers()
external
view
returns (bytes32[] memory validCallerHashes_);
/**
* @dev function {addValidCaller} onlyOwner
*
* Allows the owner to add the hash of a valid caller
*
* @param newValidCallerHash_ The hash of the new valid caller
*/
function addValidCaller(bytes32 newValidCallerHash_) external;
/**
* @dev function {removeValidCaller} onlyOwner
*
* Allows the owner to remove a valid caller
*
* @param removedValidCallerHash_ The hash of the old removed valid caller
*/
function removeValidCaller(bytes32 removedValidCallerHash_) external;
/**
* @dev function {setProjectTaxRecipient} onlyOwner
*
* Allows the manager to set the project tax recipient address
*
* @param projectTaxRecipient_ New recipient address
*/
function setProjectTaxRecipient(address projectTaxRecipient_) external;
/**
* @dev function {setSwapThresholdBasisPoints} onlyOwner
*
* Allows the manager to set the autoswap threshold
*
* @param swapThresholdBasisPoints_ New swap threshold in basis points
*/
function setSwapThresholdBasisPoints(
uint16 swapThresholdBasisPoints_
) external;
/**
* @dev function {setProjectTaxRates} onlyOwner
*
* Change the tax rates, subject to only ever decreasing
*
* @param newProjectBuyTaxBasisPoints_ The new buy tax rate
* @param newProjectSellTaxBasisPoints_ The new sell tax rate
*/
function setProjectTaxRates(
uint16 newProjectBuyTaxBasisPoints_,
uint16 newProjectSellTaxBasisPoints_
) external;
/**
* @dev function {setLimits} onlyOwner
*
* Change the limits on transactions and holdings
*
* @param newMaxTokensPerTransaction_ The new per txn limit
* @param newMaxTokensPerWallet_ The new tokens per wallet limit
*/
function setLimits(
uint256 newMaxTokensPerTransaction_,
uint256 newMaxTokensPerWallet_
) external;
/**
* @dev function {limitsEnforced}
*
* Return if limits are enforced on this contract
*
* @return bool : they are / aren't
*/
function limitsEnforced() external view returns (bool);
/**
* @dev getMetadropBuyTaxBasisPoints
*
* Return the metadrop buy tax basis points given the timed expiry
*/
function getMetadropBuyTaxBasisPoints() external view returns (uint256);
/**
* @dev getMetadropSellTaxBasisPoints
*
* Return the metadrop sell tax basis points given the timed expiry
*/
function getMetadropSellTaxBasisPoints() external view returns (uint256);
/**
* @dev totalBuyTaxBasisPoints
*
* Provide easy to view tax total:
*/
function totalBuyTaxBasisPoints() external view returns (uint256);
/**
* @dev totalSellTaxBasisPoints
*
* Provide easy to view tax total:
*/
function totalSellTaxBasisPoints() external view returns (uint256);
/**
* @dev distributeTaxTokens
*
* Allows the distribution of tax tokens to the designated recipient(s)
*
* As part of standard processing the tax token balance being above the threshold
* will trigger an autoswap to ETH and distribution of this ETH to the designated
* recipients. This is automatic and there is no need for user involvement.
*
* As part of this swap there are a number of calculations performed, particularly
* if the tax balance is above MAX_SWAP_THRESHOLD_MULTIPLE.
*
* Testing indicates that these calculations are safe. But given the data / code
* interactions it remains possible that some edge case set of scenarios may cause
* an issue with these calculations.
*
* This method is therefore provided as a 'fallback' option to safely distribute
* accumulated taxes from the contract, with a direct transfer of the ERC20 tokens
* themselves.
*/
function distributeTaxTokens() external;
/**
* @dev function {withdrawETH} onlyOwner
*
* A withdraw function to allow ETH to be withdrawn by the manager
*
* This contract should never hold ETH. The only envisaged scenario where
* it might hold ETH is a failed autoswap where the uniswap swap has completed,
* the recipient of ETH reverts, the contract then wraps to WETH and the
* wrap to WETH fails.
*
* This feels unlikely. But, for safety, we include this method.
*
* @param amount_ The amount to withdraw
*/
function withdrawETH(uint256 amount_) external;
/**
* @dev function {withdrawERC20} onlyOwner
*
* A withdraw function to allow ERC20s (except address(this)) to be withdrawn.
*
* This contract should never hold ERC20s other than tax tokens. The only envisaged
* scenario where it might hold an ERC20 is a failed autoswap where the uniswap swap
* has completed, the recipient of ETH reverts, the contract then wraps to WETH, the
* wrap to WETH succeeds, BUT then the transfer of WETH fails.
*
* This feels even less likely than the scenario where ETH is held on the contract.
* But, for safety, we include this method.
*
* @param token_ The ERC20 contract
* @param amount_ The amount to withdraw
*/
function withdrawERC20(address token_, uint256 amount_) external;
/**
* @dev Destroys a `value` amount of tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 value) external;
/**
* @dev Destroys a `value` amount of tokens from `account`, deducting from
* the caller's allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `value`.
*/
function burnFrom(address account, uint256 value) external;
}
// File contracts/Global/IErrors.sol
// Metadrop Contracts (v2.1.0)
/**
*
* @title IErrors.sol. Interface for error definitions used across the platform
*
* @author metadrop
*
*/
pragma solidity 0.8.21;
interface IErrors {
enum BondingCurveErrorType {
OK, // No error
INVALID_NUMITEMS, // The numItem value is 0
SPOT_PRICE_OVERFLOW // The updated spot price doesn't fit into 128 bits
}
error AdapterParamsMustBeEmpty(); // The adapter parameters on this LZ call must be empty.
error AdditionToPoolIsBelowPerTransactionMinimum(); // The contribution amount is less than the minimum.
error AdditionToPoolWouldExceedPoolCap(); // This addition to the pool would exceed the pool cap.
error AdditionToPoolWouldExceedPerAddressCap(); // This addition to the pool would exceed the per address cap.
error AddressAlreadySet(); // The address being set can only be set once, and is already non-0.
error AllowanceDecreasedBelowZero(); // You cannot decrease the allowance below zero.
error AlreadyInitialised(); // The contract is already initialised: it cannot be initialised twice!
error ApprovalCallerNotOwnerNorApproved(); // The caller must own the token or be an approved operator.
error ApproveFromTheZeroAddress(); // Approval cannot be called from the zero address (indeed, how have you??).
error ApproveToTheZeroAddress(); // Approval cannot be given to the zero address.
error ApprovalQueryForNonexistentToken(); // The token does not exist.
error AuctionStatusIsNotEnded(); // Throw if the action required the auction to be closed, and it isn't.
error AuctionStatusIsNotOpen(); // Throw if the action requires the auction to be open, and it isn't.
error AuxCallFailed(
address[] modules,
uint256 value,
bytes data,
uint256 txGas
); // An auxilliary call from the drop factory failed.
error BalanceMismatch(); // An error when comparing balance amounts.
error BalanceQueryForZeroAddress(); // Cannot query the balance for the zero address.
error BidMustBeBelowTheFloorWhenReducingQuantity(); // Only bids that are below the floor can reduce the quantity of the bid.
error BidMustBeBelowTheFloorForRefundDuringAuction(); // Only bids that are below the floor can be refunded during the auction.
error BondingCurveError(BondingCurveErrorType error); // An error of the type specified has occured in bonding curve processing.
error BurnExceedsBalance(); // The amount you have selected to burn exceeds the addresses balance.
error BurnFromTheZeroAddress(); // Tokens cannot be burned from the zero address. (Also, how have you called this!?!)
error CallerIsNotDepositBoxOwner(); // The caller is not the owner of the deposit box.
error CallerIsNotFactory(); // The caller of this function must match the factory address in storage.
error CallerIsNotFactoryOrProjectOwner(); // The caller of this function must match the factory address OR project owner address.
error CallerIsNotFactoryProjectOwnerOrPool(); // The caller of this function must match the factory address, project owner or pool address.
error CallerIsNotTheOwner(); // The caller is not the owner of this contract.
error CallerIsNotTheManager(); // The caller is not the manager of this contract.
error CallerMustBeLzApp(); // The caller must be an LZ application.
error CallerIsNotPlatformAdmin(address caller); // The caller of this function must be part of the platformAdmin group.
error CallerIsNotSuperAdmin(address caller); // The caller of this function must match the superAdmin address in storage.
error CannotAddLiquidityOnCreateAndUseDRIPool(); // Cannot use both liquidity added on create and a DRIPool in the same token.
error CannotSetNewOwnerToTheZeroAddress(); // You can't set the owner of this contract to the zero address (address(0)).
error CannotSetToZeroAddress(); // The corresponding address cannot be set to the zero address (address(0)).
error CannotSetNewManagerToTheZeroAddress(); // Cannot transfer the manager to the zero address (address(0)).
error CannotWithdrawThisToken(); // Cannot withdraw the specified token.
error CanOnlyReduce(); // The given operation can only reduce the value specified.
error CollectionAlreadyRevealed(); // The collection is already revealed; you cannot call reveal again.
error ContractIsDecommissioned(); // This contract is decommissioned!
error ContractIsPaused(); // The call requires the contract to be unpaused, and it is paused.
error ContractIsNotPaused(); // The call required the contract to be paused, and it is NOT paused.
error DecreasedAllowanceBelowZero(); // The request would decrease the allowance below zero, and that is not allowed.
error DestinationIsNotTrustedSource(); // The destination that is being called through LZ has not been set as trusted.
error DeployerOnly(); // This method can only be called by the deployer address.
error DeploymentError(); // Error on deployment.
error DepositBoxIsNotOpen(); // This action cannot complete as the deposit box is not open.
error DriPoolAddressCannotBeAddressZero(); // The Dri Pool address cannot be the zero address.
error GasLimitIsTooLow(); // The gas limit for the LayerZero call is too low.
error IncorrectConfirmationValue(); // You need to enter the right confirmation value to call this funtion (usually 69420).
error IncorrectPayment(); // The function call did not include passing the correct payment.
error InitialLiquidityAlreadyAdded(); // Initial liquidity has already been added. You can't do it again.
error InitialLiquidityNotYetAdded(); // Initial liquidity needs to have been added for this to succedd.
error InsufficientAllowance(); // There is not a high enough allowance for this operation.
error InvalidAdapterParams(); // The current adapter params for LayerZero on this contract won't work :(.
error InvalidAddress(); // An address being processed in the function is not valid.
error InvalidEndpointCaller(); // The calling address is not a valid LZ endpoint. The LZ endpoint was set at contract creation
// and cannot be altered after. Check the address LZ endpoint address on the contract.
error InvalidMinGas(); // The minimum gas setting for LZ in invalid.
error InvalidOracleSignature(); // The signature provided with the contract call is not valid, either in format or signer.
error InvalidPayload(); // The LZ payload is invalid
error InvalidReceiver(); // The address used as a target for funds is not valid.
error InvalidSourceSendingContract(); // The LZ message is being related from a source contract on another chain that is NOT trusted.
error InvalidTotalShares(); // Total shares must equal 100 percent in basis points.
error LimitsCanOnlyBeRaised(); // Limits are UP ONLY.
error ListLengthMismatch(); // Two or more lists were compared and they did not match length.
error LiquidityPoolMustBeAContractAddress(); // Cannot add a non-contract as a liquidity pool.
error LiquidityPoolCannotBeAddressZero(); // Cannot add a liquidity pool from the zero address.
error LPLockUpMustFitUint88(); // LP lockup is held in a uint88, so must fit.
error NoTrustedPathRecord(); // LZ needs a trusted path record for this to work. What's that, you ask?
error MachineAddressCannotBeAddressZero(); // Cannot set the machine address to the zero address.
error ManagerUnauthorizedAccount(); // The caller is not the pending manager.
error MaxBidQuantityIs255(); // Validation: as we use a uint8 array to track bid positions the max bid quantity is 255.
error MaxPublicMintAllowanceExceeded(
uint256 requested,
uint256 alreadyMinted,
uint256 maxAllowance
); // The calling address has requested a quantity that would exceed the max allowance.
error MaxSupplyTooHigh(); // Max supply must fit in a uint128.
error MaxTokensPerWalletExceeded(); // The transfer would exceed the max tokens per wallet limit.
error MaxTokensPerTxnExceeded(); // The transfer would exceed the max tokens per transaction limit.
error MetadataIsLocked(); // The metadata on this contract is locked; it cannot be altered!
error MetadropFactoryOnlyOncePerReveal(); // This function can only be called (a) by the factory and, (b) just one time!
error MetadropModulesOnly(); // Can only be called from a metadrop contract.
error MetadropOracleCannotBeAddressZero(); // The metadrop Oracle cannot be the zero address (address(0)).
error MinGasLimitNotSet(); // The minimum gas limit for LayerZero has not been set.
error MintERC2309QuantityExceedsLimit(); // The `quantity` minted with ERC2309 exceeds the safety limit.
error MintingIsClosedForever(); // Minting is, as the error suggests, so over (and locked forever).
error MintToZeroAddress(); // Cannot mint to the zero address.
error MintZeroQuantity(); // The quantity of tokens minted must be more than zero.
error NewBuyTaxBasisPointsExceedsMaximum(); // Project owner trying to set the tax rate too high.
error NewSellTaxBasisPointsExceedsMaximum(); // Project owner trying to set the tax rate too high.
error NoETHForLiquidityPair(); // No ETH has been provided for the liquidity pair.
error TaxPeriodStillInForce(); // The minimum tax period has not yet expired.
error NoPaymentDue(); // No payment is due for this address.
error NoRefundForCaller(); // Error thrown when the calling address has no refund owed.
error NoStoredMessage(); // There is no stored message matching the passed parameters.
error NothingToClaim(); // The calling address has nothing to claim.
error NoTokenForLiquidityPair(); // There is no token to add to the LP.
error OperationDidNotSucceed(); // The operation failed (vague much?).
error OracleSignatureHasExpired(); // A signature has been provided but it is too old.
error OwnableUnauthorizedAccount(); // The caller is not the pending owner.
error OwnershipNotInitializedForExtraData(); // The `extraData` cannot be set on an uninitialized ownership slot.
error OwnerQueryForNonexistentToken(); // The token does not exist.
error ParametersDoNotMatchSignedMessage(); // The parameters passed with the signed message do not match the message itself.
error ParamTooLargeStartDate(); // The passed parameter exceeds the var type max.
error ParamTooLargeEndDate(); // The passed parameter exceeds the var type max.
error ParamTooLargeMinETH(); // The passed parameter exceeds the var type max.
error ParamTooLargePerAddressMax(); // The passed parameter exceeds the var type max.
error ParamTooLargeVestingDays(); // The passed parameter exceeds the var type max.
error ParamTooLargePoolSupply(); // The passed parameter exceeds the var type max.
error ParamTooLargePoolPerTxnMinETH(); // The passed parameter exceeds the var type max.
error PassedConfigDoesNotMatchApproved(); // The config provided on the call does not match the approved config.
error PauseCutOffHasPassed(); // The time period in which we can pause has passed; this contract can no longer be paused.
error PaymentMustCoverPerMintFee(); // The payment passed must at least cover the per mint fee for the quantity requested.
error PermitDidNotSucceed(); // The safeERC20 permit failed.
error PlatformAdminCannotBeAddressZero(); // We cannot use the zero address (address(0)) as a platformAdmin.
error PlatformTreasuryCannotBeAddressZero(); // The treasury address cannot be set to the zero address.
error PoolIsAboveMinimum(); // You required the pool to be below the minimum, and it is not
error PoolIsBelowMinimum(); // You required the pool to be above the minimum, and it is not
error PoolPhaseIsClosed(); // The block.timestamp is either before the pool is open or after it is closed.
error PoolPhaseIsNotAfter(); // The block.timestamp is either before or during the pool open phase.
error PoolVestingNotYetComplete(); // Tokens in the pool are not yet vested.
error ProjectOwnerCannotBeAddressZero(); // The project owner has to be a non zero address.
error ProofInvalid(); // The provided proof is not valid with the provided arguments.
error QuantityExceedsRemainingCollectionSupply(); // The requested quantity would breach the collection supply.
error QuantityExceedsRemainingPhaseSupply(); // The requested quantity would breach the phase supply.
error QuantityExceedsMaxPossibleCollectionSupply(); // The requested quantity would breach the maximum trackable supply
error ReferralIdAlreadyUsed(); // This referral ID has already been used; they are one use only.
error RequestingMoreThanAvailableBalance(); // The request exceeds the available balance.
error RequestingMoreThanRemainingAllocation(
uint256 previouslyMinted,
uint256 requested,
uint256 remainingAllocation
); // Number of tokens requested for this mint exceeds the remaining allocation (taking the
// original allocation from the list and deducting minted tokens).
error RoyaltyFeeWillExceedSalePrice(); // The ERC2981 royalty specified will exceed the sale price.
error ShareTotalCannotBeZero(); // The total of all the shares cannot be nothing.
error SliceOutOfBounds(); // The bytes slice operation was out of bounds.
error SliceOverflow(); // The bytes slice operation overlowed.
error SuperAdminCannotBeAddressZero(); // The superAdmin cannot be the sero address (address(0)).
error SupplyTotalMismatch(); // The sum of the team supply and lp supply does not match.
error SupportWindowIsNotOpen(); // The project owner has not requested support within the support request expiry window.
error TaxFreeAddressCannotBeAddressZero(); // A tax free address cannot be address(0)
error TemplateCannotBeAddressZero(); // The address for a template cannot be address zero (address(0)).
error TemplateNotFound(); // There is no template that matches the passed template Id.
error ThisMintIsClosed(); // It's over (well, this mint is, anyway).
error TotalSharesMustMatchDenominator(); // The total of all shares must equal the denominator value.
error TransferAmountExceedsBalance(); // The transfer amount exceeds the accounts available balance.
error TransferCallerNotOwnerNorApproved(); // The caller must own the token or be an approved operator.
error TransferFailed(); // The transfer has failed.
error TransferFromIncorrectOwner(); // The token must be owned by `from`.
error TransferToNonERC721ReceiverImplementer(); // Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
error TransferFromZeroAddress(); // Cannot transfer from the zero address. Indeed, this surely is impossible, and likely a waste to check??
error TransferToZeroAddress(); // Cannot transfer to the zero address.
error UnrecognisedVRFMode(); // Currently supported VRF modes are 0: chainlink and 1: arrng
error URIQueryForNonexistentToken(); // The token does not exist.
error ValueExceedsMaximum(); // The value sent exceeds the maximum allowed (super useful explanation huh?).
error VRFCoordinatorCannotBeAddressZero(); // The VRF coordinator cannot be the zero address (address(0)).
}
// File contracts/ERC20Factory/ERC20Factory/IERC20FactoryByMetadrop.sol
// Metadrop Contracts (v2.1.0)
pragma solidity 0.8.21;
/**
* @dev Metadrop ERC-20 factory, interface
*/
interface IERC20FactoryByMetadrop is
IConfigStructures,
IErrors,
IERC20ConfigByMetadrop
{
event DriPoolAddressUpdated(address oldAddress, address newAddress);
event ERC20Created(
string metaId,
address indexed deployer,
address contractInstance,
address driPoolInstance,
string symbol,
string name,
bytes constructorArgs
);
event MachineAddressUpdated(address oldAddress, address newAddress);
event OracleAddressUpdated(address oldAddress, address newAddress);
event MessageValidityInSecondsUpdated(
uint256 oldMessageValidityInSeconds,
uint256 newMessageValidityInSeconds
);
event PlatformTreasuryUpdated(address oldAddress, address newAddress);
/**
* @dev function {initialiseMachineAddress}
*
* Initialise the machine template address. This needs to be separate from
* the constructor as the machine needs the factory address on its constructor.
*
* This must ALWAYS be called as part of deployment.
*
* @param machineTemplate_ the machine address
*/
function initialiseMachineAddress(address machineTemplate_) external;
/**
* @dev function {decommissionFactory} onlySuperAdmin
*
* Make this factory unusable for creating new ERC20s, forever
*
*/
function decommissionFactory() external;
/**
* @dev function {setMetadropOracleAddress} onlyPlatformAdmin
*
* Set the metadrop trusted oracle address
*
* @param metadropOracleAddress_ Trusted metadrop oracle address
*/
function setMetadropOracleAddress(address metadropOracleAddress_) external;
/**
* @dev function {setMessageValidityInSeconds} onlyPlatformAdmin
*
* Set the validity period of signed messages
*
* @param messageValidityInSeconds_ Validity period in seconds for messages signed by the trusted oracle
*/
function setMessageValidityInSeconds(
uint256 messageValidityInSeconds_
) external;
/**
* @dev function {setPlatformTreasury} onlySuperAdmin
*
* Set the address that platform fees will be paid to / can be withdrawn to.
* Note that this is restricted to the highest authority level, the super
* admin. Platform admins can trigger a withdrawal to the treasury, but only
* the default admin can set or alter the treasury address. It is recommended
* that the default admin is highly secured and restrited e.g. a multi-sig.
*
* @param platformTreasury_ New treasury address
*/
function setPlatformTreasury(address platformTreasury_) external;
/**
* @dev function {setMachineAddress} onlyPlatformAdmin
*
* Set a new machine template address
*
* @param newMachineAddress_ the new machine address
*/
function setMachineAddress(address newMachineAddress_) external;
/**
* @dev function {setDriPoolAddress} onlyPlatformAdmin
*
* Set a new launch pool template address
*
* @param newDriPoolAddress_ the new launch pool address
*/
function setDriPoolAddress(address newDriPoolAddress_) external;
/**
* @dev function {withdrawETH} onlyPlatformAdmin
*
* A withdraw function to allow ETH to be withdrawn to the treasury
*
* @param amount_ The amount to withdraw
*/
function withdrawETH(uint256 amount_) external;
/**
* @dev function {withdrawERC20} onlyPlatformAdmin
*
* A withdraw function to allow ERC20s to be withdrawn to the treasury
*
* @param token_ The contract address of the token being withdrawn
* @param amount_ The amount to withdraw
*/
function withdrawERC20(IERC20 token_, uint256 amount_) external;
/**
* @dev function {createERC20}
*
* Create an ERC-20
*
* @param metaId_ The drop Id being approved
* @param salt_ Salt for create2
* @param erc20Config_ ERC20 configuration
* @param signedMessage_ The signed message object
* @param vaultFee_ The fee for the token vault
* @param deploymentFee_ The fee for deployment, if any
* @return deployedAddress_ The deployed ERC20 contract address
*/
function createERC20(
string calldata metaId_,
bytes32 salt_,
ERC20Config calldata erc20Config_,
SignedDropMessageDetails calldata signedMessage_,
uint256 vaultFee_,
uint256 deploymentFee_
) external payable returns (address deployedAddress_);
/**
* @dev function {createConfigHash}
*
* Create the config hash
*
* @param metaId_ The drop Id being approved
* @param salt_ Salt for create2
* @param erc20Config_ ERC20 configuration
* @param messageTimeStamp_ When the message for this config hash was signed
* @param vaultFee_ The fee for the token vault
* @param deploymentFee_ The fee for deployment, if any
* @param deployer_ Address performing the deployment
* @return configHash_ The bytes32 config hash
*/
function createConfigHash(
string calldata metaId_,
bytes32 salt_,
ERC20Config calldata erc20Config_,
uint256 messageTimeStamp_,
uint256 vaultFee_,
uint256 deploymentFee_,
address deployer_
) external pure returns (bytes32 configHash_);
}
// File contracts/Global/Revert.sol
// Metadrop Contracts (v2.1.0)
/**
*
* @title Revert.sol. For efficient reverts
*
* @author metadrop
*
*/
pragma solidity 0.8.21;
abstract contract Revert {
/**
* @dev For more efficient reverts.
*/
function _revert(bytes4 errorSelector) internal pure {
assembly {
mstore(0x00, errorSelector)
revert(0x00, 0x04)
}
}
}
// File contracts/Global/OZ/Ownable.sol
// Metadrop Contracts (v2.1.0)
// Metadrop based on OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity 0.8.21;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is IErrors, Revert, Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
_revert(CallerIsNotTheOwner.selector);
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
_revert(CannotSetNewOwnerToTheZeroAddress.selector);
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File contracts/Global/OZ/Ownable2Step.sol
// Metadrop Contracts (v2.1.0)
// Metadrop based on OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)
pragma solidity 0.8.21;
/**
* @dev Contract module which provides access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is specified at deployment time in the constructor for `Ownable`. This
* can later be changed with {transferOwnership} and {acceptOwnership}.
*
* This module is used through inheritance. It will make available all functions
* from parent (Ownable).
*/
abstract contract Ownable2Step is Ownable {
address private _pendingOwner;
event OwnershipTransferStarted(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Returns the address of the pending owner.
*/
function pendingOwner() public view virtual returns (address) {
return _pendingOwner;
}
/**
* @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
* Can only be called by the current owner.
*/
function transferOwnership(
address newOwner
) public virtual override onlyOwner {
_pendingOwner = newOwner;
emit OwnershipTransferStarted(owner(), newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual override {
delete _pendingOwner;
super._transferOwnership(newOwner);
}
/**
* @dev The new owner accepts the ownership transfer.
*/
function acceptOwnership() public virtual {
address sender = _msgSender();
if (pendingOwner() != sender) {
_revert(OwnableUnauthorizedAccount.selector);
}
_transferOwnership(sender);
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// File contracts/Global/OZ/SafeERC20.sol
// Metadrop Contracts (v2.1.0)
// Metadrop based on OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity 0.8.21;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(
token,
abi.encodeCall(token.transferFrom, (from, to, value))
);
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
forceApprove(token, spender, oldAllowance + value);
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
if (oldAllowance < value) {
revert IErrors.DecreasedAllowanceBelowZero();
}
forceApprove(token, spender, oldAllowance - value);
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
* 0 before setting it to a non-zero value.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
if (nonceAfter != (nonceBefore + 1)) {
revert IErrors.PermitDidNotSucceed();
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "call fail");
if ((returndata.length != 0) && !abi.decode(returndata, (bool))) {
revert IErrors.OperationDidNotSucceed();
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(
IERC20 token,
bytes memory data
) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success &&
(returndata.length == 0 || abi.decode(returndata, (bool))) &&
address(token).code.length > 0;
}
}
// File contracts/ThirdParty/Unicrypt/IUniswapV2Locker.sol
// Interface definition for UniswapV2Locker.sol
pragma solidity 0.8.21;
interface IERCBurn {
function burn(uint256 _amount) external;
function approve(address spender, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external returns (uint256);
function balanceOf(address account) external view returns (uint256);
}
interface IMigrator {
function migrate(
address lpToken,
uint256 amount,
uint256 unlockDate,
address owner
) external returns (bool);
}
interface IUniswapV2Locker {
struct UserInfo {
EnumerableSet.AddressSet lockedTokens; // records all tokens the user has locked
mapping(address => uint256[]) locksForToken; // map erc20 address to lock id for that token
}
struct TokenLock {
uint256 lockDate; // the date the token was locked
uint256 amount; // the amount of tokens still locked (initialAmount minus withdrawls)
uint256 initialAmount; // the initial lock amount
uint256 unlockDate; // the date the token can be withdrawn
uint256 lockID; // lockID nonce per uni pair
address owner;
}
struct FeeStruct {
uint256 ethFee; // Small eth fee to prevent spam on the platform
IERCBurn secondaryFeeToken; // UNCX or UNCL
uint256 secondaryTokenFee; // optional, UNCX or UNCL
uint256 secondaryTokenDiscount; // discount on liquidity fee for burning secondaryToken
uint256 liquidityFee; // fee on univ2 liquidity tokens
uint256 referralPercent; // fee for referrals
IERCBurn referralToken; // token the refferer must hold to qualify as a referrer
uint256 referralHold; // balance the referrer must hold to qualify as a referrer
uint256 referralDiscount; // discount on flatrate fees for using a valid referral address
}
function setDev(address payable _devaddr) external;
/**
* @notice set the migrator contract which allows locked lp tokens to be migrated to uniswap v3
*/
function setMigrator(IMigrator _migrator) external;
function setSecondaryFeeToken(address _secondaryFeeToken) external;
/**
* @notice referrers need to hold the specified token and hold amount to be elegible for referral fees
*/
function setReferralTokenAndHold(
IERCBurn _referralToken,
uint256 _hold
) external;
function setFees(
uint256 _referralPercent,
uint256 _referralDiscount,
uint256 _ethFee,
uint256 _secondaryTokenFee,
uint256 _secondaryTokenDiscount,
uint256 _liquidityFee
) external;
/**
* @notice whitelisted accounts dont pay flatrate fees on locking
*/
function whitelistFeeAccount(address _user, bool _add) external;
/**
* @notice Creates a new lock
* @param _lpToken the univ2 token address
* @param _amount amount of LP tokens to lock
* @param _unlock_date the unix timestamp (in seconds) until unlock
* @param _referral the referrer address if any or address(0) for none
* @param _fee_in_eth fees can be paid in eth or in a secondary token such as UNCX with a discount on univ2 tokens
* @param _withdrawer the user who can withdraw liquidity once the lock expires.
*/
function lockLPToken(
address _lpToken,
uint256 _amount,
uint256 _unlock_date,
address payable _referral,
bool _fee_in_eth,
address payable _withdrawer
) external payable;
/**
* @notice extend a lock with a new unlock date, _index and _lockID ensure the correct lock is changed
* this prevents errors when a user performs multiple tx per block possibly with varying gas prices
*/
function relock(
address _lpToken,
uint256 _index,
uint256 _lockID,
uint256 _unlock_date
) external;
/**
* @notice withdraw a specified amount from a lock. _index and _lockID ensure the correct lock is changed
* this prevents errors when a user performs multiple tx per block possibly with varying gas prices
*/
function withdraw(
address _lpToken,
uint256 _index,
uint256 _lockID,
uint256 _amount
) external;
/**
* @notice increase the amount of tokens per a specific lock, this is preferable to creating a new lock, less fees, and faster loading on our live block explorer
*/
function incrementLock(
address _lpToken,
uint256 _index,
uint256 _lockID,
uint256 _amount
) external;
/**
* @notice split a lock into two seperate locks, useful when a lock is about to expire and youd like to relock a portion
* and withdraw a smaller portion
*/
function splitLock(
address _lpToken,
uint256 _index,
uint256 _lockID,
uint256 _amount
) external payable;
/**
* @notice transfer a lock to a new owner, e.g. presale project -> project owner
*/
function transferLockOwnership(
address _lpToken,
uint256 _index,
uint256 _lockID,
address payable _newOwner
) external;
/**
* @notice migrates liquidity to uniswap v3
*/
function migrate(
address _lpToken,
uint256 _index,
uint256 _lockID,
uint256 _amount
) external;
function getNumLocksForToken(
address _lpToken
) external view returns (uint256);
function getNumLockedTokens() external view returns (uint256);
function getLockedTokenAtIndex(
uint256 _index
) external view returns (address);
// user functions
function getUserNumLockedTokens(
address _user
) external view returns (uint256);
function getUserLockedTokenAtIndex(
address _user,
uint256 _index
) external view returns (address);
function getUserNumLocksForToken(
address _user,
address _lpToken
) external view returns (uint256);
function getUserLockForTokenAtIndex(
address _user,
address _lpToken,
uint256 _index
)
external
view
returns (uint256, uint256, uint256, uint256, uint256, address);
// whitelist
function getWhitelistedUsersLength() external view returns (uint256);
function getWhitelistedUserAtIndex(
uint256 _index
) external view returns (address);
function getUserWhitelistStatus(address _user) external view returns (bool);
}
// File contracts/ThirdParty/WETH/IWETH.sol
pragma solidity 0.8.21;
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint256 wad) external;
}
// File contracts/ERC20Factory/ERC20/ERC20ByMetadrop.sol
// Metadrop Contracts (v2.1.0)
pragma solidity 0.8.21;
/**
* @dev Metadrop core ERC-20 contract
*
* @dev Implementation of the {IERC20} interface.
*
*/
contract ERC20ByMetadrop is Context, IERC20ByMetadrop, Ownable2Step {
bytes32 public constant x_META_ID_HASH =
0xa55621ecdf604079fd2196038df8869366a58f5548613256be0d68fa00ea403a;
using EnumerableSet for EnumerableSet.AddressSet;
using EnumerableSet for EnumerableSet.Bytes32Set;
using SafeERC20 for IERC20;
uint256 public constant x_CONST_VERSION = 100020001000000000;
uint256 internal constant CONST_BP_DENOM = 10000;
uint256 internal constant CONST_ROUND_DEC = 100000000000;
uint256 internal constant CONST_CALL_GAS_LIMIT = 50000;
uint256 internal constant CONST_MAX_SWAP_THRESHOLD_MULTIPLE = 20;
uint256 public immutable lpSupply;
uint256 public immutable projectSupply;
uint256 public immutable botProtectionDurationInSeconds;
address public immutable metadropTaxRecipient;
address public immutable uniswapV2Pair;
address public immutable driPool;
address public immutable lpOwner;
address public immutable projectSupplyRecipient;
address public immutable metadropFactory;
uint256 public immutable metadropTaxPeriodInDays;
bool internal immutable _tokenHasTax;
IUniswapV2Locker internal immutable _tokenVault;
IUniswapV2Router02 internal immutable _uniswapRouter;
VaultType public immutable vaultType;
/** @dev {Storage Slot 1} Vars read as part of transfers packed to a single
* slot for warm reads.
* Slot 1:
* 128
* 32
* 16 * 5
* 8 * 2
* ------
* 256
* ------ */
uint128 private _totalSupply;
uint32 public fundedDate;
uint16 public projectBuyTaxBasisPoints;
uint16 public projectSellTaxBasisPoints;
uint16 public metadropBuyTaxBasisPoints;
uint16 public metadropSellTaxBasisPoints;
uint16 public swapThresholdBasisPoints;
/** @dev {_autoSwapInProgress} We start with {_autoSwapInProgress} ON, as we don't want to
* call autoswap when processing initial liquidity from this address. We turn this OFF when
* liquidity has been loaded, and use this bool to control processing during auto-swaps
* from that point onwards. */
bool private _autoSwapInProgress = true;
/** @dev {Storage Slot 2} Vars read as part of transfers packed to a single
* slot for warm reads.
* Slot 1:
* 128
* 128
* ------
* 256
* ------ */
uint128 public maxTokensPerTransaction;
uint128 public maxTokensPerWallet;
/** @dev {Storage Slot 3} Not read / written in transfers (unless autoswap taking place):
* 160
* 88
* 8
* ------
* 256
* ------ */
address public projectTaxRecipient;
uint88 public lpLockupInDays;
bool public burnLPTokens;
/** @dev {Storage Slot 4} Potentially written in transfers:
* Slot 3:
* 128
* 128
* ------
* 256
* ------ */
uint128 public projectTaxPendingSwap;
uint128 public metadropTaxPendingSwap;
/** @dev {Storage Slot 5 to n} Not read as part of transfers etc. */
string private _name;
string private _symbol;
/** @dev {_balances} Addresses balances */
mapping(address => uint256) private _balances;
/** @dev {_allowances} Addresses allocance details */
mapping(address => mapping(address => uint256)) private _allowances;
/** @dev {_validCallerCodeHashes} Code hashes of callers we consider valid */
EnumerableSet.Bytes32Set private _validCallerCodeHashes;
/** @dev {_liquidityPools} Enumerable set for liquidity pool addresses */
EnumerableSet.AddressSet private _liquidityPools;
/** @dev {_unlimited} Enumerable set for addresses where limits do not apply */
EnumerableSet.AddressSet private _unlimited;
/**
* @dev {constructor}
*
* @param integrationAddresses_ The project owner, uniswap router, unicrypt vault, metadrop factory and pool template.
* @param baseParams_ configuration of this ERC20.
* @param supplyParams_ Supply configuration of this ERC20.
* @param taxParams_ Tax configuration of this ERC20
* @param taxParams_ Launch pool configuration of this ERC20
*/
constructor(
address[5] memory integrationAddresses_,
bytes memory baseParams_,
bytes memory supplyParams_,
bytes memory taxParams_,
bytes memory poolParams_
) {
_decodeBaseParams(integrationAddresses_[0], baseParams_);
_uniswapRouter = IUniswapV2Router02(integrationAddresses_[1]);
_tokenVault = IUniswapV2Locker(integrationAddresses_[2]);
metadropFactory = (integrationAddresses_[3]);
ERC20SupplyParameters memory supplyParams = abi.decode(
supplyParams_,
(ERC20SupplyParameters)
);
ERC20TaxParameters memory taxParams = abi.decode(
taxParams_,
(ERC20TaxParameters)
);
driPool = integrationAddresses_[4];
ERC20PoolParameters memory poolParams;
if (integrationAddresses_[4] != address(0)) {
poolParams = abi.decode(poolParams_, (ERC20PoolParameters));
}
_processSupplyParams(supplyParams, poolParams);
projectSupplyRecipient = supplyParams.projectSupplyRecipient;
lpSupply = supplyParams.lpSupply * (10 ** decimals());
projectSupply = supplyParams.projectSupply * (10 ** decimals());
maxTokensPerWallet = uint128(
supplyParams.maxTokensPerWallet * (10 ** decimals())
);
maxTokensPerTransaction = uint128(
supplyParams.maxTokensPerTxn * (10 ** decimals())
);
lpLockupInDays = uint88(supplyParams.lpLockupInDays);
botProtectionDurationInSeconds = supplyParams
.botProtectionDurationInSeconds;
lpOwner = supplyParams.projectLPOwner;
burnLPTokens = supplyParams.burnLPTokens;
_tokenHasTax = _processTaxParams(taxParams);
metadropTaxPeriodInDays = taxParams.metadropTaxPeriodInDays;
swapThresholdBasisPoints = uint16(taxParams.taxSwapThresholdBasisPoints);
projectTaxRecipient = taxParams.projectTaxRecipient;
metadropTaxRecipient = taxParams.metadropTaxRecipient;
vaultType = VaultType.unicrypt;
_mintBalances(
lpSupply,
projectSupply,
poolParams.poolSupply * (10 ** decimals())
);
uniswapV2Pair = _createPair();
}
/**
* @dev {onlyOwnerFactoryOrPool}
*
* Throws if called by any account other than the owner, factory or pool.
*/
modifier onlyOwnerFactoryOrPool() {
if (
metadropFactory != _msgSender() &&
owner() != _msgSender() &&
driPool != _msgSender()
) {
_revert(CallerIsNotFactoryProjectOwnerOrPool.selector);
}
_;
}
/**
* @dev function {_decodeBaseParams}
*
* Decode NFT Parameters
*
* @param projectOwner_ The owner of this contract
* @param encodedBaseParams_ The base params encoded into a bytes array
*/
function _decodeBaseParams(
address projectOwner_,
bytes memory encodedBaseParams_
) internal {
_transferOwnership(projectOwner_);
(_name, _symbol) = abi.decode(encodedBaseParams_, (string, string));
}
/**
* @dev function {_processSupplyParams}
*
* Process provided supply params
*
* @param erc20SupplyParameters_ The supply params
* @param erc20PoolParameters_ The pool params
*/
function _processSupplyParams(
ERC20SupplyParameters memory erc20SupplyParameters_,
ERC20PoolParameters memory erc20PoolParameters_
) internal {
if (
erc20SupplyParameters_.maxSupply !=
(erc20SupplyParameters_.lpSupply +
erc20SupplyParameters_.projectSupply +
erc20PoolParameters_.poolSupply)
) {
_revert(SupplyTotalMismatch.selector);
}
if (erc20SupplyParameters_.maxSupply > type(uint128).max) {
_revert(MaxSupplyTooHigh.selector);
}
if (erc20SupplyParameters_.lpLockupInDays > type(uint88).max) {
_revert(LPLockUpMustFitUint88.selector);
}
_unlimited.add(erc20SupplyParameters_.projectSupplyRecipient);
_unlimited.add(address(this));
_unlimited.add(address(0));
}
/**
* @dev function {_processTaxParams}
*
* Process provided tax params
*
* @param erc20TaxParameters_ The tax params
*/
function _processTaxParams(
ERC20TaxParameters memory erc20TaxParameters_
) internal returns (bool tokenHasTax_) {
/**
* @dev We use the immutable var {_tokenHasTax} to avoid unneccesary storage writes and reads. If this
* token does NOT have tax applied then there is no need to store or read these parameters, and we can
* avoid this simply by checking the immutable var. Pass back the value for this var from this method.
*/
if (
erc20TaxParameters_.projectBuyTaxBasisPoints == 0 &&
erc20TaxParameters_.projectSellTaxBasisPoints == 0 &&
erc20TaxParameters_.metadropBuyTaxBasisPoints == 0 &&
erc20TaxParameters_.metadropSellTaxBasisPoints == 0
) {
return false;
} else {
projectBuyTaxBasisPoints = uint16(
erc20TaxParameters_.projectBuyTaxBasisPoints
);
projectSellTaxBasisPoints = uint16(
erc20TaxParameters_.projectSellTaxBasisPoints
);
metadropBuyTaxBasisPoints = uint16(
erc20TaxParameters_.metadropBuyTaxBasisPoints
);
metadropSellTaxBasisPoints = uint16(
erc20TaxParameters_.metadropSellTaxBasisPoints
);
return true;
}
}
/**
* @dev function {_mintBalances}
*
* Mint initial balances
*
* @param lpMint_ The number of tokens for liquidity
* @param projectMint_ The number of tokens for the project treasury
* @param poolMint_ The number of tokens for the launch pool
*/
function _mintBalances(
uint256 lpMint_,
uint256 projectMint_,
uint256 poolMint_
) internal {
if (lpMint_ > 0) {
_mint(address(this), lpMint_);
}
if (projectMint_ > 0) {
_mint(projectSupplyRecipient, projectMint_);
}
if (poolMint_ > 0) {
_mint(driPool, poolMint_);
}
}
/**
* @dev function {_createPair}
*
* Create the uniswap pair
*
* @return uniswapV2Pair_ The pair address
*/
function _createPair() internal returns (address uniswapV2Pair_) {
if (_totalSupply > 0) {
uniswapV2Pair_ = IUniswapV2Factory(_uniswapRouter.factory()).createPair(
address(this),
_uniswapRouter.WETH()
);
_liquidityPools.add(uniswapV2Pair_);
emit LiquidityPoolCreated(uniswapV2Pair_);
}
_unlimited.add(address(_uniswapRouter));
_unlimited.add(uniswapV2Pair_);
return (uniswapV2Pair_);
}
/**
* @dev function {addInitialLiquidity}
*
* Add initial liquidity to the uniswap pair
*
* @param vaultFee_ The vault fee in wei. This must match the required fee from the external vault contract.
* @param lpLockupInDaysOverride_ The number of days to lock liquidity NOTE you can pass 0 to use the stored value.
* This value is an override, and will override a stored value which is LOWER that it. If the value you are passing is
* LOWER than the stored value the stored value will not be reduced.
*
* Example usage 1: When creating the coin the lpLockupInDays is set to 0. This means that on this call the
* user can set the lockup to any value they like, as all integer values greater than zero will be used to override
* that set in storage.
*
* Example usage 2: When using a DRI Pool the lockup period is set on this contract and the pool need not know anything
* about this setting. The pool can pass back a 0 on this call and know that the existing value stored on this contract
* will be used.
* @param burnLPTokensOverride_ If the LP tokens should be burned (otherwise they are locked). This is an override field
* that can ONLY be used to override a held value of FALSE with a new value of TRUE.
*
* Example usage 1: When creating the coin the user didn't add liquidity, or specify that the LP tokens were to be burned.
* So burnLPTokens is held as FALSE. When they add liquidity they want to lock tokens, so they pass this in as FALSE again,
* and it remains FALSE.
*
* Example usage 2: As above, but when later adding liquidity the user wants to burn the LP. So the stored value is FALSE
* and the user passes TRUE into this method. The TRUE overrides the held value of FALSE and the tokens are burned.
*
* Example uusage 3: The user is using a DRI pool and they have specified on the coin creation that the LP tokens are to
* be burned. This contract therefore holds TRUE for burnLPTokens. The DRI pool does not need to know what the user has
* selected. It can safely pass back FALSE to this method call and the stored value of TRUE will remain, resulting in the
* LP tokens being burned.
*/
function addInitialLiquidity(
uint256 vaultFee_,
uint256 lpLockupInDaysOverride_,
bool burnLPTokensOverride_
) external payable onlyOwnerFactoryOrPool {
uint256 ethForLiquidity;
if ((burnLPTokens == false) && (burnLPTokensOverride_ == true)) {
burnLPTokens = true;
}
if (burnLPTokens) {
if (msg.value == 0) {
_revert(NoETHForLiquidityPair.selector);
}
ethForLiquidity = msg.value;
} else {
if (vaultFee_ >= msg.value) {
// The amount of ETH MUST exceed the vault fee, otherwise what liquidity are we adding?
_revert(NoETHForLiquidityPair.selector);
}
ethForLiquidity = msg.value - vaultFee_;
}
if (lpLockupInDaysOverride_ > lpLockupInDays) {
lpLockupInDays = uint88(lpLockupInDaysOverride_);
}
_addInitialLiquidity(ethForLiquidity, vaultFee_);
}
/**
* @dev function {_addInitialLiquidity}
*
* Add initial liquidity to the uniswap pair (internal function that does processing)
*
* @param ethAmount_ The amount of ETH passed into the call
* @param vaultFee_ The vault fee in wei. This must match the required fee from the external vault contract.
*/
function _addInitialLiquidity(
uint256 ethAmount_,
uint256 vaultFee_
) internal {
// Funded date is the date of first funding. We can only add initial liquidity once. If this date is set,
// we cannot proceed
if (fundedDate != 0) {
_revert(InitialLiquidityAlreadyAdded.selector);
}
fundedDate = uint32(block.timestamp);
// Can only do this if this contract holds tokens:
if (balanceOf(address(this)) == 0) {
_revert(NoTokenForLiquidityPair.selector);
}
// Approve the uniswap router for an inifinite amount (max uint256)
// This means that we don't need to worry about later incrememtal
// approvals on tax swaps, as the uniswap router allowance will never
// be decreased (see code in decreaseAllowance for reference)
_approve(address(this), address(_uniswapRouter), type(uint256).max);
// Add the liquidity:
(uint256 amountA, uint256 amountB, uint256 lpTokens) = _uniswapRouter
.addLiquidityETH{value: ethAmount_}(
address(this),
balanceOf(address(this)),
0,
0,
address(this),
block.timestamp
);
emit InitialLiquidityAdded(amountA, amountB, lpTokens);
// We now set this to false so that future transactions can be eligibile for autoswaps
_autoSwapInProgress = false;
// Are we locking, or burning?
if (burnLPTokens) {
_burnLiquidity(lpTokens);
} else {
// Lock the liquidity:
_addLiquidityToVault(vaultFee_, lpTokens);
}
}
/**
* @dev function {_addLiquidityToVault}
*
* Lock initial liquidity on vault contract
*
* @param vaultFee_ The vault fee in wei. This must match the required fee from the external vault contract.
* @param lpTokens_ The amount of LP tokens to be locked
*/
function _addLiquidityToVault(uint256 vaultFee_, uint256 lpTokens_) internal {
IERC20(uniswapV2Pair).approve(address(_tokenVault), lpTokens_);
_tokenVault.lockLPToken{value: vaultFee_}(
uniswapV2Pair,
IERC20(uniswapV2Pair).balanceOf(address(this)),
block.timestamp + (lpLockupInDays * 1 days),
payable(address(0)),
true,
payable(lpOwner)
);
emit LiquidityLocked(lpTokens_, lpLockupInDays);
}
/**
* @dev function {_burnLiquidity}
*
* Burn LP tokens
*
* @param lpTokens_ The amount of LP tokens to be locked
*/
function _burnLiquidity(uint256 lpTokens_) internal {
IERC20(uniswapV2Pair).transfer(address(0), lpTokens_);
emit LiquidityBurned(lpTokens_);
}
/**
* @dev function {isLiquidityPool}
*
* Return if an address is a liquidity pool
*
* @param queryAddress_ The address being queried
* @return bool The address is / isn't a liquidity pool
*/
function isLiquidityPool(address queryAddress_) public view returns (bool) {
/** @dev We check the uniswapV2Pair address first as this is an immutable variable and therefore does not need
* to be fetched from storage, saving gas if this address IS the uniswapV2Pool. We also add this address
* to the enumerated set for ease of reference (for example it is returned in the getter), and it does
* not add gas to any other calls, that still complete in 0(1) time.
*/
return (queryAddress_ == uniswapV2Pair ||
_liquidityPools.contains(queryAddress_));
}
/**
* @dev function {liquidityPools}
*
* Returns a list of all liquidity pools
*
* @return liquidityPools_ a list of all liquidity pools
*/
function liquidityPools()
external
view
returns (address[] memory liquidityPools_)
{
return (_liquidityPools.values());
}
/**
* @dev function {addLiquidityPool} onlyOwner
*
* Allows the manager to add a liquidity pool to the pool enumerable set
*
* @param newLiquidityPool_ The address of the new liquidity pool
*/
function addLiquidityPool(address newLiquidityPool_) public onlyOwner {
// Don't allow calls that didn't pass an address:
if (newLiquidityPool_ == address(0)) {
_revert(LiquidityPoolCannotBeAddressZero.selector);
}
// Only allow smart contract addresses to be added, as only these can be pools:
if (newLiquidityPool_.code.length == 0) {
_revert(LiquidityPoolMustBeAContractAddress.selector);
}
// Add this to the enumerated list:
_liquidityPools.add(newLiquidityPool_);
emit LiquidityPoolAdded(newLiquidityPool_);
}
/**
* @dev function {removeLiquidityPool} onlyOwner
*
* Allows the manager to remove a liquidity pool
*
* @param removedLiquidityPool_ The address of the old removed liquidity pool
*/
function removeLiquidityPool(
address removedLiquidityPool_
) external onlyOwner {
// Remove this from the enumerated list:
_liquidityPools.remove(removedLiquidityPool_);
emit LiquidityPoolRemoved(removedLiquidityPool_);
}
/**
* @dev function {isUnlimited}
*
* Return if an address is unlimited (is not subject to per txn and per wallet limits)
*
* @param queryAddress_ The address being queried
* @return bool The address is / isn't unlimited
*/
function isUnlimited(address queryAddress_) public view returns (bool) {
return (_unlimited.contains(queryAddress_));
}
/**
* @dev function {unlimitedAddresses}
*
* Returns a list of all unlimited addresses
*
* @return unlimitedAddresses_ a list of all unlimited addresses
*/
function unlimitedAddresses()
external
view
returns (address[] memory unlimitedAddresses_)
{
return (_unlimited.values());
}
/**
* @dev function {addUnlimited} onlyOwner
*
* Allows the manager to add an unlimited address
*
* @param newUnlimited_ The address of the new unlimited address
*/
function addUnlimited(address newUnlimited_) external onlyOwner {
// Add this to the enumerated list:
_unlimited.add(newUnlimited_);
emit UnlimitedAddressAdded(newUnlimited_);
}
/**
* @dev function {removeUnlimited} onlyOwner
*
* Allows the manager to remove an unlimited address
*
* @param removedUnlimited_ The address of the old removed unlimited address
*/
function removeUnlimited(address removedUnlimited_) external onlyOwner {
// Remove this from the enumerated list:
_unlimited.remove(removedUnlimited_);
emit UnlimitedAddressRemoved(removedUnlimited_);
}
/**
* @dev function {isValidCaller}
*
* Return if an address is a valid caller
*
* @param queryHash_ The code hash being queried
* @return bool The address is / isn't a valid caller
*/
function isValidCaller(bytes32 queryHash_) public view returns (bool) {
return (_validCallerCodeHashes.contains(queryHash_));
}
/**
* @dev function {validCallers}
*
* Returns a list of all valid caller code hashes
*
* @return validCallerHashes_ a list of all valid caller code hashes
*/
function validCallers()
external
view
returns (bytes32[] memory validCallerHashes_)
{
return (_validCallerCodeHashes.values());
}
/**
* @dev function {addValidCaller} onlyOwner
*
* Allows the owner to add the hash of a valid caller
*
* @param newValidCallerHash_ The hash of the new valid caller
*/
function addValidCaller(bytes32 newValidCallerHash_) external onlyOwner {
_validCallerCodeHashes.add(newValidCallerHash_);
emit ValidCallerAdded(newValidCallerHash_);
}
/**
* @dev function {removeValidCaller} onlyOwner
*
* Allows the owner to remove a valid caller
*
* @param removedValidCallerHash_ The hash of the old removed valid caller
*/
function removeValidCaller(
bytes32 removedValidCallerHash_
) external onlyOwner {
// Remove this from the enumerated list:
_validCallerCodeHashes.remove(removedValidCallerHash_);
emit ValidCallerRemoved(removedValidCallerHash_);
}
/**
* @dev function {setProjectTaxRecipient} onlyOwner
*
* Allows the manager to set the project tax recipient address
*
* @param projectTaxRecipient_ New recipient address
*/
function setProjectTaxRecipient(
address projectTaxRecipient_
) external onlyOwner {
projectTaxRecipient = projectTaxRecipient_;
emit ProjectTaxRecipientUpdated(projectTaxRecipient_);
}
/**
* @dev function {setSwapThresholdBasisPoints} onlyOwner
*
* Allows the manager to set the autoswap threshold
*
* @param swapThresholdBasisPoints_ New swap threshold in basis points
*/
function setSwapThresholdBasisPoints(
uint16 swapThresholdBasisPoints_
) external onlyOwner {
uint256 oldswapThresholdBasisPoints = swapThresholdBasisPoints;
swapThresholdBasisPoints = swapThresholdBasisPoints_;
emit AutoSwapThresholdUpdated(
oldswapThresholdBasisPoints,
swapThresholdBasisPoints_
);
}
/**
* @dev function {setProjectTaxRates} onlyOwner
*
* Change the tax rates, subject to only ever decreasing
*
* @param newProjectBuyTaxBasisPoints_ The new buy tax rate
* @param newProjectSellTaxBasisPoints_ The new sell tax rate
*/
function setProjectTaxRates(
uint16 newProjectBuyTaxBasisPoints_,
uint16 newProjectSellTaxBasisPoints_
) external onlyOwner {
uint16 oldBuyTaxBasisPoints = projectBuyTaxBasisPoints;
uint16 oldSellTaxBasisPoints = projectSellTaxBasisPoints;
// Cannot increase, down only
if (newProjectBuyTaxBasisPoints_ > oldBuyTaxBasisPoints) {
_revert(CanOnlyReduce.selector);
}
// Cannot increase, down only
if (newProjectSellTaxBasisPoints_ > oldSellTaxBasisPoints) {
_revert(CanOnlyReduce.selector);
}
projectBuyTaxBasisPoints = newProjectBuyTaxBasisPoints_;
projectSellTaxBasisPoints = newProjectSellTaxBasisPoints_;
// If either rate has been reduced to zero we set the metadrop tax rate
// (if non zero) to zero as well:
if (
newProjectBuyTaxBasisPoints_ == 0 || newProjectSellTaxBasisPoints_ == 0
) {
uint16 oldMetadropBuyTaxBasisPoints = metadropBuyTaxBasisPoints;
uint16 oldMetadropSellTaxBasisPoints = metadropSellTaxBasisPoints;
uint16 newMetadropBuyTaxBasisPoints = oldMetadropBuyTaxBasisPoints;
uint16 newMetadropSellTaxBasisPoints = oldMetadropSellTaxBasisPoints;
if (newProjectBuyTaxBasisPoints_ == 0) {
newMetadropBuyTaxBasisPoints = 0;
metadropBuyTaxBasisPoints = 0;
}
if (newProjectSellTaxBasisPoints_ == 0) {
newMetadropSellTaxBasisPoints = 0;
metadropSellTaxBasisPoints = 0;
}
emit MetadropTaxBasisPointsChanged(
oldMetadropBuyTaxBasisPoints,
newMetadropBuyTaxBasisPoints,
oldMetadropSellTaxBasisPoints,
newMetadropSellTaxBasisPoints
);
}
emit ProjectTaxBasisPointsChanged(
oldBuyTaxBasisPoints,
newProjectBuyTaxBasisPoints_,
oldSellTaxBasisPoints,
newProjectSellTaxBasisPoints_
);
}
/**
* @dev function {setLimits} onlyOwner
*
* Change the limits on transactions and holdings
*
* @param newMaxTokensPerTransaction_ The new per txn limit
* @param newMaxTokensPerWallet_ The new tokens per wallet limit
*/
function setLimits(
uint256 newMaxTokensPerTransaction_,
uint256 newMaxTokensPerWallet_
) external onlyOwner {
uint256 oldMaxTokensPerTransaction = maxTokensPerTransaction;
uint256 oldMaxTokensPerWallet = maxTokensPerWallet;
// Limit can only be increased:
if (
(oldMaxTokensPerTransaction == 0 && newMaxTokensPerTransaction_ != 0) ||
(oldMaxTokensPerWallet == 0 && newMaxTokensPerWallet_ != 0)
) {
_revert(LimitsCanOnlyBeRaised.selector);
}
if (
((newMaxTokensPerTransaction_ != 0) &&
newMaxTokensPerTransaction_ < oldMaxTokensPerTransaction) ||
((newMaxTokensPerWallet_ != 0) &&
newMaxTokensPerWallet_ < oldMaxTokensPerWallet)
) {
_revert(LimitsCanOnlyBeRaised.selector);
}
maxTokensPerTransaction = uint128(newMaxTokensPerTransaction_);
maxTokensPerWallet = uint128(newMaxTokensPerWallet_);
emit LimitsUpdated(
oldMaxTokensPerTransaction,
newMaxTokensPerTransaction_,
oldMaxTokensPerWallet,
newMaxTokensPerWallet_
);
}
/**
* @dev function {limitsEnforced}
*
* Return if limits are enforced on this contract
*
* @return bool : they are / aren't
*/
function limitsEnforced() public view returns (bool) {
// Limits are not enforced if
// this is renounced AND after then protection end date
// OR prior to LP funding:
// The second clause of 'fundedDate == 0' isn't strictly needed, since with a funded
// date of 0 we would always expect the block.timestamp to be less than 0 plus
// the botProtectionDurationInSeconds. But, to cover the miniscule chance of a user
// selecting a truly enormous bot protection period, such that when added to 0 it
// is more than the current block.timestamp, we have included this second clause. There
// is no permanent gas overhead (the logic will be returning from the first clause after
// the bot protection period has expired). During the bot protection period there is a minor
// gas overhead from evaluating the fundedDate == 0 (which will be false), but this is minimal.
if (
(owner() == address(0) &&
block.timestamp > fundedDate + botProtectionDurationInSeconds) ||
fundedDate == 0
) {
return false;
} else {
// LP has been funded AND we are within the protection period:
return true;
}
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev getMetadropBuyTaxBasisPoints
*
* Return the metadrop buy tax basis points given the timed expiry
*/
function getMetadropBuyTaxBasisPoints() public view returns (uint256) {
// If we are outside the metadrop tax period this is ZERO
if (block.timestamp > (fundedDate + (metadropTaxPeriodInDays * 1 days))) {
return 0;
} else {
return metadropBuyTaxBasisPoints;
}
}
/**
* @dev getMetadropSellTaxBasisPoints
*
* Return the metadrop sell tax basis points given the timed expiry
*/
function getMetadropSellTaxBasisPoints() public view returns (uint256) {
// If we are outside the metadrop tax period this is ZERO
if (block.timestamp > (fundedDate + (metadropTaxPeriodInDays * 1 days))) {
return 0;
} else {
return metadropSellTaxBasisPoints;
}
}
/**
* @dev totalBuyTaxBasisPoints
*
* Provide easy to view tax total:
*/
function totalBuyTaxBasisPoints() public view returns (uint256) {
return projectBuyTaxBasisPoints + getMetadropBuyTaxBasisPoints();
}
/**
* @dev totalSellTaxBasisPoints
*
* Provide easy to view tax total:
*/
function totalSellTaxBasisPoints() public view returns (uint256) {
return projectSellTaxBasisPoints + getMetadropSellTaxBasisPoints();
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(
address account
) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(
address to,
uint256 amount
) public virtual override(IERC20) returns (bool) {
address owner = _msgSender();
_transfer(
owner,
to,
amount,
(isLiquidityPool(owner) || isLiquidityPool(to))
);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(
address owner,
address spender
) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(
address spender,
uint256 amount
) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount, (isLiquidityPool(from) || isLiquidityPool(to)));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(
address spender,
uint256 addedValue
) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(
address spender,
uint256 subtractedValue
) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance < subtractedValue) {
_revert(AllowanceDecreasedBelowZero.selector);
}
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount,
bool applyTax
) internal virtual {
_beforeTokenTransfer(from, to, amount);
// Perform pre-tax validation (e.g. amount doesn't exceed balance, max txn amount)
uint256 fromBalance = _pretaxValidationAndLimits(from, to, amount);
// Perform autoswap if eligible
_autoSwap(from, to);
// Process taxes
uint256 amountMinusTax = _taxProcessing(applyTax, to, from, amount);
// Perform post-tax validation (e.g. total balance after post-tax amount applied)
_posttaxValidationAndLimits(from, to, amountMinusTax);
_balances[from] = fromBalance - amount;
_balances[to] += amountMinusTax;
emit Transfer(from, to, amountMinusTax);
_afterTokenTransfer(from, to, amount);
}
/**
* @dev function {_pretaxValidationAndLimits}
*
* Perform validation on pre-tax amounts
*
* @param from_ From address for the transaction
* @param to_ To address for the transaction
* @param amount_ Amount of the transaction
*/
function _pretaxValidationAndLimits(
address from_,
address to_,
uint256 amount_
) internal view returns (uint256 fromBalance_) {
// This can't be a transfer to the liquidity pool before the funding date
// UNLESS the from address is this contract. This ensures that the initial
// LP funding transaction is from this contract using the supply of tokens
// designated for the LP pool, and therefore the initial price in the pool
// is being set as expected.
//
// This protects from, for example, tokens from a team minted supply being
// paired with ETH and added to the pool, setting the initial price, BEFORE
// the initial liquidity is added through this contract.
if (to_ == uniswapV2Pair && from_ != address(this) && fundedDate == 0) {
_revert(InitialLiquidityNotYetAdded.selector);
}
if (from_ == address(0)) {
_revert(TransferFromZeroAddress.selector);
}
if (to_ == address(0)) {
_revert(TransferToZeroAddress.selector);
}
fromBalance_ = _balances[from_];
if (fromBalance_ < amount_) {
_revert(TransferAmountExceedsBalance.selector);
}
if (
limitsEnforced() &&
(maxTokensPerTransaction != 0) &&
((isLiquidityPool(from_) && !isUnlimited(to_)) ||
(isLiquidityPool(to_) && !isUnlimited(from_)))
) {
// Liquidity pools aren't always going to round cleanly. This can (and does)
// mean that a limit of 5,000 tokens (for example) will trigger on a transfer
// of 5,000 tokens, as the transfer is actually for 5,000.00000000000000213.
// While 4,999 will work fine, it isn't hugely user friendly. So we buffer
// the limit with rounding decimals, which in all cases are considerably less
// than one whole token:
uint256 roundedLimited;
unchecked {
roundedLimited = maxTokensPerTransaction + CONST_ROUND_DEC;
}
if (amount_ > roundedLimited) {
_revert(MaxTokensPerTxnExceeded.selector);
}
}
return (fromBalance_);
}
/**
* @dev function {_posttaxValidationAndLimits}
*
* Perform validation on post-tax amounts
*
* @param to_ To address for the transaction
* @param amount_ Amount of the transaction
*/
function _posttaxValidationAndLimits(
address from_,
address to_,
uint256 amount_
) internal view {
if (
limitsEnforced() &&
(maxTokensPerWallet != 0) &&
!isUnlimited(to_) &&
// If this is a buy (from a liquidity pool), we apply if the to_
// address isn't noted as unlimited:
(isLiquidityPool(from_) && !isUnlimited(to_))
) {
// Liquidity pools aren't always going to round cleanly. This can (and does)
// mean that a limit of 5,000 tokens (for example) will trigger on a max holding
// of 5,000 tokens, as the transfer to achieve that is actually for
// 5,000.00000000000000213. While 4,999 will work fine, it isn't hugely user friendly.
// So we buffer the limit with rounding decimals, which in all cases are considerably
// less than one whole token:
uint256 roundedLimited;
unchecked {
roundedLimited = maxTokensPerWallet + CONST_ROUND_DEC;
}
if ((amount_ + balanceOf(to_) > roundedLimited)) {
_revert(MaxTokensPerWalletExceeded.selector);
}
}
}
/**
* @dev function {_taxProcessing}
*
* Perform tax processing
*
* @param applyTax_ Do we apply tax to this transaction?
* @param to_ The reciever of the token
* @param from_ The sender of the token
* @param sentAmount_ The amount being send
* @return amountLessTax_ The amount that will be recieved, i.e. the send amount minus tax
*/
function _taxProcessing(
bool applyTax_,
address to_,
address from_,
uint256 sentAmount_
) internal returns (uint256 amountLessTax_) {
amountLessTax_ = sentAmount_;
unchecked {
if (_tokenHasTax && applyTax_ && !_autoSwapInProgress) {
uint256 tax;
// on sell
if (isLiquidityPool(to_) && totalSellTaxBasisPoints() > 0) {
if (projectSellTaxBasisPoints > 0) {
uint256 projectTax = ((sentAmount_ * projectSellTaxBasisPoints) /
CONST_BP_DENOM);
projectTaxPendingSwap += uint128(projectTax);
tax += projectTax;
}
uint256 metadropSellTax = getMetadropSellTaxBasisPoints();
if (metadropSellTax > 0) {
uint256 metadropTax = ((sentAmount_ * metadropSellTax) /
CONST_BP_DENOM);
metadropTaxPendingSwap += uint128(metadropTax);
tax += metadropTax;
}
}
// on buy
else if (isLiquidityPool(from_) && totalBuyTaxBasisPoints() > 0) {
if (projectBuyTaxBasisPoints > 0) {
uint256 projectTax = ((sentAmount_ * projectBuyTaxBasisPoints) /
CONST_BP_DENOM);
projectTaxPendingSwap += uint128(projectTax);
tax += projectTax;
}
uint256 metadropBuyTax = getMetadropBuyTaxBasisPoints();
if (metadropBuyTax > 0) {
uint256 metadropTax = ((sentAmount_ * metadropBuyTax) /
CONST_BP_DENOM);
metadropTaxPendingSwap += uint128(metadropTax);
tax += metadropTax;
}
}
if (tax > 0) {
_balances[address(this)] += tax;
emit Transfer(from_, address(this), tax);
amountLessTax_ -= tax;
}
}
}
return (amountLessTax_);
}
/**
* @dev function {_autoSwap}
*
* Automate the swap of accumulated tax fees to native token
*
* @param from_ The sender of the token
* @param to_ The recipient of the token
*/
function _autoSwap(address from_, address to_) internal {
if (_tokenHasTax) {
uint256 contractBalance = projectTaxPendingSwap + metadropTaxPendingSwap;
uint256 swapBalance = contractBalance;
uint256 swapThresholdInTokens = (_totalSupply *
swapThresholdBasisPoints) / CONST_BP_DENOM;
if (_eligibleForSwap(from_, to_, swapBalance, swapThresholdInTokens)) {
// Store that a swap back is in progress:
_autoSwapInProgress = true;
// Check if we need to reduce the amount of tokens for this swap:
if (
swapBalance >
swapThresholdInTokens * CONST_MAX_SWAP_THRESHOLD_MULTIPLE
) {
swapBalance =
swapThresholdInTokens *
CONST_MAX_SWAP_THRESHOLD_MULTIPLE;
}
// Perform the auto swap to native token:
_swapTaxForNative(swapBalance, contractBalance);
// Flag that the autoswap is complete:
_autoSwapInProgress = false;
}
}
}
/**
* @dev function {_eligibleForSwap}
*
* Is the current transfer eligible for autoswap
*
* @param from_ The sender of the token
* @param to_ The recipient of the token
* @param taxBalance_ The current accumulated tax balance
* @param swapThresholdInTokens_ The swap threshold as a token amount
*/
function _eligibleForSwap(
address from_,
address to_,
uint256 taxBalance_,
uint256 swapThresholdInTokens_
) internal view returns (bool) {
return (taxBalance_ >= swapThresholdInTokens_ &&
!_autoSwapInProgress &&
!isLiquidityPool(from_) &&
from_ != address(_uniswapRouter) &&
to_ != address(_uniswapRouter));
}
/**
* @dev function {_swapTaxForNative}
*
* Swap tokens taken as tax for native token
*
* @param swapBalance_ The current accumulated tax balance to swap
* @param contractBalance_ The current accumulated total tax balance
*/
function _swapTaxForNative(
uint256 swapBalance_,
uint256 contractBalance_
) internal {
uint256 preSwapBalance = address(this).balance;
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _uniswapRouter.WETH();
// Wrap external calls in try / catch to handle errors
try
_uniswapRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
swapBalance_,
0,
path,
address(this),
block.timestamp + 600
)
{
uint256 postSwapBalance = address(this).balance;
uint256 balanceToDistribute = postSwapBalance - preSwapBalance;
uint256 totalPendingSwap = projectTaxPendingSwap + metadropTaxPendingSwap;
uint256 projectBalanceToDistribute = (balanceToDistribute *
projectTaxPendingSwap) / totalPendingSwap;
uint256 metadropBalanceToDistribute = (balanceToDistribute *
metadropTaxPendingSwap) / totalPendingSwap;
// We will not have swapped all tax tokens IF the amount was greater than the max auto swap.
// We therefore cannot just set the pending swap counters to 0. Instead, in this scenario,
// we must reduce them in proportion to the swap amount vs the remaining balance + swap
// amount.
//
// For example:
// * swap Balance is 250
// * contract balance is 385.
// * projectTaxPendingSwap is 300
// * metadropTaxPendingSwap is 85.
//
// The new total for the projectTaxPendingSwap is:
// = 300 - ((300 * 250) / 385)
// = 300 - 194
// = 106
// The new total for the metadropTaxPendingSwap is:
// = 85 - ((85 * 250) / 385)
// = 85 - 55
// = 30
//
if (swapBalance_ < contractBalance_) {
// Calculate the project tax spending swap reduction amount:
uint256 projectTaxPendingSwapReduction = (projectTaxPendingSwap *
swapBalance_) / contractBalance_;
projectTaxPendingSwap -= uint128(projectTaxPendingSwapReduction);
// The metadrop tax pending swap reduction is therefore the total swap amount minus the
// project tax spending swap reduction:
metadropTaxPendingSwap -= uint128(
swapBalance_ - projectTaxPendingSwapReduction
);
} else {
(projectTaxPendingSwap, metadropTaxPendingSwap) = (0, 0);
}
// Distribute to treasuries:
bool success;
address weth;
uint256 gas;
if (projectBalanceToDistribute > 0) {
// If no gas limit was provided or provided gas limit greater than gas left, just use the remaining gas.
gas = (CONST_CALL_GAS_LIMIT == 0 || CONST_CALL_GAS_LIMIT > gasleft())
? gasleft()
: CONST_CALL_GAS_LIMIT;
// We limit the gas passed so that a called address cannot cause a block out of gas error:
(success, ) = projectTaxRecipient.call{
value: projectBalanceToDistribute,
gas: gas
}("");
// If the ETH transfer fails, wrap the ETH and send it as WETH. We do this so that a called
// address cannot cause this transfer to fail, either intentionally or by mistake:
if (!success) {
if (weth == address(0)) {
weth = _uniswapRouter.WETH();
}
try IWETH(weth).deposit{value: projectBalanceToDistribute}() {
try
IERC20(address(weth)).transfer(
projectTaxRecipient,
projectBalanceToDistribute
)
{} catch {
// Dont allow a failed external call (in this case to WETH) to stop a transfer.
// Emit that this has occured and continue.
emit ExternalCallError(1);
}
} catch {
// Dont allow a failed external call (in this case to WETH) to stop a transfer.
// Emit that this has occured and continue.
emit ExternalCallError(2);
}
}
}
if (metadropBalanceToDistribute > 0) {
// If no gas limit was provided or provided gas limit greater than gas left, just use the remaining gas.
gas = (CONST_CALL_GAS_LIMIT == 0 || CONST_CALL_GAS_LIMIT > gasleft())
? gasleft()
: CONST_CALL_GAS_LIMIT;
(success, ) = metadropTaxRecipient.call{
value: metadropBalanceToDistribute,
gas: gas
}("");
// If the ETH transfer fails, wrap the ETH and send it as WETH. We do this so that a called
// address cannot cause this transfer to fail, either intentionally or by mistake:
if (!success) {
if (weth == address(0)) {
weth = _uniswapRouter.WETH();
}
try IWETH(weth).deposit{value: metadropBalanceToDistribute}() {
try
IERC20(address(weth)).transfer(
metadropTaxRecipient,
metadropBalanceToDistribute
)
{} catch {
// Dont allow a failed external call (in this case to WETH) to stop a transfer.
// Emit that this has occured and continue.
emit ExternalCallError(3);
}
} catch {
// Dont allow a failed external call (in this case to WETH) to stop a transfer.
// Emit that this has occured and continue.
emit ExternalCallError(4);
}
}
}
} catch {
// Dont allow a failed external call (in this case to uniswap) to stop a transfer.
// Emit that this has occured and continue.
emit ExternalCallError(5);
}
}
/**
* @dev distributeTaxTokens
*
* Allows the distribution of tax tokens to the designated recipient(s)
*
* As part of standard processing the tax token balance being above the threshold
* will trigger an autoswap to ETH and distribution of this ETH to the designated
* recipients. This is automatic and there is no need for user involvement.
*
* As part of this swap there are a number of calculations performed, particularly
* if the tax balance is above CONST_MAX_SWAP_THRESHOLD_MULTIPLE.
*
* Testing indicates that these calculations are safe. But given the data / code
* interactions it remains possible that some edge case set of scenarios may cause
* an issue with these calculations.
*
* This method is therefore provided as a 'fallback' option to safely distribute
* accumulated taxes from the contract, with a direct transfer of the ERC20 tokens
* themselves.
*/
function distributeTaxTokens() external {
if (projectTaxPendingSwap > 0) {
uint256 projectDistribution = projectTaxPendingSwap;
projectTaxPendingSwap = 0;
_transfer(address(this), projectTaxRecipient, projectDistribution, false);
}
if (metadropTaxPendingSwap > 0) {
uint256 metadropDistribution = metadropTaxPendingSwap;
metadropTaxPendingSwap = 0;
_transfer(
address(this),
metadropTaxRecipient,
metadropDistribution,
false
);
}
}
/**
* @dev function {withdrawETH} onlyOwner
*
* A withdraw function to allow ETH to be withdrawn by the manager
*
* This contract should never hold ETH. The only envisaged scenario where
* it might hold ETH is a failed autoswap where the uniswap swap has completed,
* the recipient of ETH reverts, the contract then wraps to WETH and the
* wrap to WETH fails.
*
* This feels unlikely. But, for safety, we include this method.
*
* @param amount_ The amount to withdraw
*/
function withdrawETH(uint256 amount_) external onlyOwner {
(bool success, ) = _msgSender().call{value: amount_}("");
if (!success) {
_revert(TransferFailed.selector);
}
}
/**
* @dev function {withdrawERC20} onlyOwner
*
* A withdraw function to allow ERC20s (except address(this)) to be withdrawn.
*
* This contract should never hold ERC20s other than tax tokens. The only envisaged
* scenario where it might hold an ERC20 is a failed autoswap where the uniswap swap
* has completed, the recipient of ETH reverts, the contract then wraps to WETH, the
* wrap to WETH succeeds, BUT then the transfer of WETH fails.
*
* This feels even less likely than the scenario where ETH is held on the contract.
* But, for safety, we include this method.
*
* @param token_ The ERC20 contract
* @param amount_ The amount to withdraw
*/
function withdrawERC20(address token_, uint256 amount_) external onlyOwner {
if (token_ == address(this)) {
_revert(CannotWithdrawThisToken.selector);
}
IERC20(token_).safeTransfer(_msgSender(), amount_);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
if (account == address(0)) {
_revert(MintToZeroAddress.selector);
}
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += uint128(amount);
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
if (account == address(0)) {
_revert(BurnFromTheZeroAddress.selector);
}
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
if (accountBalance < amount) {
_revert(BurnExceedsBalance.selector);
}
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= uint128(amount);
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
if (owner == address(0)) {
_revert(ApproveFromTheZeroAddress.selector);
}
if (spender == address(0)) {
_revert(ApproveToTheZeroAddress.selector);
}
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < amount) {
_revert(InsufficientAllowance.selector);
}
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Destroys a `value` amount of tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 value) public virtual {
_burn(_msgSender(), value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, deducting from
* the caller's allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `value`.
*/
function burnFrom(address account, uint256 value) public virtual {
_spendAllowance(account, _msgSender(), value);
_burn(account, value);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
receive() external payable {}
}
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
// @@ @@
// @@ Metadrop has no affiliation with and does not endorse this token or its creators in any @@
// @@ way, unless otherwise stated. For all terms and conditions associated with tokens launched @@
// @@ using Metadrop software, refer to the terms published at metadrop[dot]com/legal. @@
// @@ @@
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@