Contract Name:
SaffronPool
Contract Source Code:
File 1 of 1 : SaffronPool
// File: contracts/interfaces/ISaffronBase.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.1;
interface ISaffronBase {
enum Tranche {S, AA, A}
enum LPTokenType {dsec, principal}
// Store values (balances, dsec, vdsec) with TrancheUint256
struct TrancheUint256 {
uint256 S;
uint256 AA;
uint256 A;
}
struct epoch_params {
uint256 start_date; // Time when the platform launched
uint256 duration; // Duration of epoch
}
}
// File: contracts/interfaces/ISaffronStrategy.sol
pragma solidity ^0.7.1;
interface ISaffronStrategy is ISaffronBase{
function deploy_all_capital() external;
function select_adapter_for_liquidity_removal() external returns(address);
function add_adapter(address adapter_address) external;
function add_pool(address pool_address) external;
function delete_adapters() external;
function set_governance(address to) external;
function get_adapter_address(uint256 adapter_index) external view returns(address);
}
// File: contracts/interfaces/ISaffronPool.sol
pragma solidity ^0.7.1;
interface ISaffronPool is ISaffronBase {
function add_liquidity(uint256 amount, Tranche tranche) external;
function remove_liquidity(address v1_dsec_token_address, uint256 dsec_amount, address v1_principal_token_address, uint256 principal_amount) external;
function get_base_asset_address() external view returns(address);
function hourly_strategy(address adapter_address) external;
function wind_down_epoch(uint256 epoch, uint256 amount_sfi) external;
function set_governance(address to) external;
function get_epoch_cycle_params() external view returns (uint256, uint256);
function shutdown() external;
}
// File: contracts/interfaces/ISaffronAdapter.sol
pragma solidity ^0.7.1;
interface ISaffronAdapter is ISaffronBase {
function deploy_capital(uint256 amount) external;
function return_capital(uint256 base_asset_amount, address to) external;
function approve_transfer(address addr,uint256 amount) external;
function get_base_asset_address() external view returns(address);
function set_base_asset(address addr) external;
function get_holdings() external returns(uint256);
function get_interest(uint256 principal) external returns(uint256);
function set_governance(address to) external;
}
// File: contracts/lib/SafeMath.sol
pragma solidity ^0.7.1;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/lib/IERC20.sol
pragma solidity ^0.7.1;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/lib/Context.sol
pragma solidity ^0.7.1;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/lib/Address.sol
pragma solidity ^0.7.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.3._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/lib/ERC20.sol
pragma solidity ^0.7.1;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/lib/SafeERC20.sol
pragma solidity ^0.7.1;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/SFI.sol
pragma solidity ^0.7.1;
contract SFI is ERC20 {
using SafeERC20 for IERC20;
address public governance;
address public SFI_minter;
uint256 public MAX_TOKENS = 100000 ether;
constructor (string memory name, string memory symbol) ERC20(name, symbol) {
// Initial governance is Saffron Deployer
governance = msg.sender;
}
function mint_SFI(address to, uint256 amount) public {
require(msg.sender == SFI_minter, "must be SFI_minter");
require(this.totalSupply() + amount < MAX_TOKENS, "cannot mint more than MAX_TOKENS");
_mint(to, amount);
}
function set_minter(address to) external {
require(msg.sender == governance, "must be governance");
SFI_minter = to;
}
function set_governance(address to) external {
require(msg.sender == governance, "must be governance");
governance = to;
}
event ErcSwept(address who, address to, address token, uint256 amount);
function erc_sweep(address _token, address _to) public {
require(msg.sender == governance, "must be governance");
IERC20 tkn = IERC20(_token);
uint256 tBal = tkn.balanceOf(address(this));
tkn.safeTransfer(_to, tBal);
emit ErcSwept(msg.sender, _to, _token, tBal);
}
}
// File: contracts/SaffronLPBalanceToken.sol
pragma solidity ^0.7.1;
contract SaffronLPBalanceToken is ERC20 {
address public pool_address;
constructor (string memory name, string memory symbol) ERC20(name, symbol) {
// Set pool_address to saffron pool that created token
pool_address = msg.sender;
}
// Allow creating new tranche tokens
function mint(address to, uint256 amount) public {
require(msg.sender == pool_address, "must be pool");
_mint(to, amount);
}
function burn(address account, uint256 amount) public {
require(msg.sender == pool_address, "must be pool");
_burn(account, amount);
}
function set_governance(address to) external {
require(msg.sender == pool_address, "must be pool");
pool_address = to;
}
}
// File: contracts/SaffronPool.sol
pragma solidity ^0.7.1;
contract SaffronPool is ISaffronPool {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address public governance; // Governance (v3: add off-chain/on-chain governance)
address public base_asset_address; // Base asset managed by the pool (DAI, USDT, YFI...)
address public SFI_address; // SFI token
uint256 public pool_principal; // Current principal balance (added minus removed)
uint256 public pool_interest; // Current interest balance (redeemable by dsec tokens)
uint256 public tranche_A_multiplier; // Current yield multiplier for tranche A
uint256 public SFI_ratio; // Ratio of base asset to SFI necessary to join tranche A
bool public _shutdown = false; // v0, v1: shutdown the pool after the final capital deploy to prevent burning funds
/**** ADAPTERS ****/
address public best_adapter_address; // Current best adapter selected by strategy
uint256 public adapter_total_principal; // v0, v1: only one adapter
ISaffronAdapter[] private adapters; // v2: list of adapters
mapping(address=>uint256) private adapter_index; // v1: adapter contract address lookup for array indexes
/**** STRATEGY ****/
address public strategy;
/**** EPOCHS ****/
epoch_params public epoch_cycle = epoch_params({
start_date: 1604239200, // 11/01/2020 @ 2:00pm (UTC)
duration: 14 days // 1210000 seconds
});
/**** EPOCH INDEXED STORAGE ****/
uint256[] public epoch_principal; // Total principal owned by the pool (all tranches)
mapping(uint256=>bool) public epoch_wound_down; // True if epoch has been wound down already (governance)
/**** EPOCH-TRANCHE INDEXED STORAGE ****/
// Array of arrays, example: tranche_SFI_earned[epoch][Tranche.S]
address[3][] public dsec_token_addresses; // Address for each dsec token
address[3][] public principal_token_addresses; // Address for each principal token
uint256[3][] public tranche_total_dsec; // Total dsec (tokens + vdsec)
uint256[3][] public tranche_total_principal; // Total outstanding principal tokens
uint256[3][] public tranche_total_utilized; // Total utilized balance in each tranche
uint256[3][] public tranche_total_unutilized; // Total unutilized balance in each tranche
uint256[3][] public tranche_S_virtual_utilized; // Total utilized virtual balance taken from tranche S (first index unused)
uint256[3][] public tranche_S_virtual_unutilized; // Total unutilized virtual balance taken from tranche S (first index unused)
uint256[3][] public tranche_interest_earned; // Interest earned (calculated at wind_down_epoch)
uint256[3][] public tranche_SFI_earned; // Total SFI earned (minted at wind_down_epoch)
/**** SFI GENERATION ****/
// v0: pool generates SFI based on subsidy schedule
// v1: pool is distributed SFI generated by the strategy contract
// v1: pools each get an amount of SFI generated depending on the total liquidity added within each interval
TrancheUint256 public TRANCHE_SFI_MULTIPLIER = TrancheUint256({
S: 90000,
AA: 0,
A: 10000
});
/**** TRANCHE BALANCES ****/
// (v0 & v1: epochs are hard-forks)
// (v2: epoch rollover implemented)
// TrancheUint256 private eternal_unutilized_balances; // Unutilized balance (in base assets) for each tranche (assets held in this pool + assets held in platforms)
// TrancheUint256 private eternal_utilized_balances; // Balance for each tranche that is not held within this pool but instead held on a platform via an adapter
/**** SAFFRON LP TOKENS ****/
// If we just have a token address then we can look up epoch and tranche balance tokens using a mapping(address=>SaffronLPdsecInfo)
// LP tokens are dsec (redeemable for interest+SFI) and principal (redeemable for base asset) tokens
struct SaffronLPTokenInfo {
bool exists;
uint256 epoch;
Tranche tranche;
LPTokenType token_type;
}
mapping(address=>SaffronLPTokenInfo) private saffron_LP_token_info;
constructor(address _strategy, address _base_asset, address _SFI_address, bool epoch_cycle_reset) {
governance = msg.sender;
base_asset_address = _base_asset;
strategy = _strategy;
SFI_address = _SFI_address;
tranche_A_multiplier = 10; // v1: start enhanced yield at 10X
SFI_ratio = 500; // v1: constant ratio
epoch_cycle.duration = (epoch_cycle_reset ? 20 minutes : 14 days); // Make testing previous epochs easier
epoch_cycle.start_date = (epoch_cycle_reset ? (block.timestamp) - (3 * epoch_cycle.duration) : 1604239200); // Make testing previous epochs easier
}
function new_epoch(uint256 epoch, address[] memory saffron_LP_dsec_token_addresses, address[] memory saffron_LP_principal_token_addresses) public {
require(tranche_total_principal.length == epoch, "improper new epoch");
require(governance == msg.sender, "must be governance");
epoch_principal.push(0);
tranche_total_dsec.push([0,0,0]);
tranche_total_principal.push([0,0,0]);
tranche_total_utilized.push([0,0,0]);
tranche_total_unutilized.push([0,0,0]);
tranche_S_virtual_utilized.push([0,0,0]);
tranche_S_virtual_unutilized.push([0,0,0]);
tranche_interest_earned.push([0,0,0]);
tranche_SFI_earned.push([0,0,0]);
dsec_token_addresses.push([ // Address for each dsec token
saffron_LP_dsec_token_addresses[uint256(Tranche.S)],
saffron_LP_dsec_token_addresses[uint256(Tranche.AA)],
saffron_LP_dsec_token_addresses[uint256(Tranche.A)]
]);
principal_token_addresses.push([ // Address for each principal token
saffron_LP_principal_token_addresses[uint256(Tranche.S)],
saffron_LP_principal_token_addresses[uint256(Tranche.AA)],
saffron_LP_principal_token_addresses[uint256(Tranche.A)]
]);
// Token info for looking up epoch and tranche of dsec tokens by token contract address
saffron_LP_token_info[saffron_LP_dsec_token_addresses[uint256(Tranche.S)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.S,
token_type: LPTokenType.dsec
});
saffron_LP_token_info[saffron_LP_dsec_token_addresses[uint256(Tranche.AA)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.AA,
token_type: LPTokenType.dsec
});
saffron_LP_token_info[saffron_LP_dsec_token_addresses[uint256(Tranche.A)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.A,
token_type: LPTokenType.dsec
});
// for looking up epoch and tranche of PRINCIPAL tokens by token contract address
saffron_LP_token_info[saffron_LP_principal_token_addresses[uint256(Tranche.S)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.S,
token_type: LPTokenType.principal
});
saffron_LP_token_info[saffron_LP_principal_token_addresses[uint256(Tranche.AA)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.AA,
token_type: LPTokenType.principal
});
saffron_LP_token_info[saffron_LP_principal_token_addresses[uint256(Tranche.A)]] = SaffronLPTokenInfo({
exists: true,
epoch: epoch,
tranche: Tranche.A,
token_type: LPTokenType.principal
});
}
struct BalanceVars {
// Tranche balance
uint256 deposit; // User deposit
uint256 capacity; // Capacity for user's intended tranche
uint256 change; // Change from deposit - capacity
// S tranche specific vars
uint256 consumed; // Total consumed
uint256 utilized_consumed;
uint256 unutilized_consumed;
uint256 available_utilized;
uint256 available_unutilized;
}
event TrancheBalance(uint256 tranche, uint256 amount, uint256 deposit, uint256 capacity, uint256 change, uint256 consumed, uint256 utilized_consumed, uint256 unutilized_consumed, uint256 available_utilized, uint256 available_unutilized);
event DsecGeneration(uint256 time_remaining, uint256 amount, uint256 dsec, address dsec_address, uint256 epoch, uint256 tranche, address user_address, address principal_token_addr);
event AddLiquidity(uint256 new_pool_principal, uint256 new_epoch_principal, uint256 new_eternal_balance, uint256 new_tranche_principal, uint256 new_tranche_dsec);
// LP user adds liquidity to the pool
// Pre-requisite (front-end): have user approve transfer on front-end to base asset using our contract address
function add_liquidity(uint256 amount, Tranche tranche) external override {
require(!_shutdown, "pool shutdown");
require(tranche == Tranche.S || tranche == Tranche.A, "v1: can't add_liquidity into AA tranche");
uint256 epoch = get_current_epoch();
require(amount != 0, "can't add 0");
require(epoch == 3, "v1.3: must be epoch 3 only");
BalanceVars memory bv = BalanceVars({
deposit: 0,
capacity: 0,
change: 0,
consumed: 0,
utilized_consumed: 0,
unutilized_consumed: 0,
available_utilized: 0,
available_unutilized: 0
});
(bv.available_utilized, bv.available_unutilized) = get_available_S_balances();
if (tranche == Tranche.S) {
tranche_total_unutilized[epoch][uint256(Tranche.S)] = tranche_total_unutilized[epoch][uint256(Tranche.S)].add(amount);
bv.deposit = amount;
}
// if (tranche == Tranche.AA) {} // v1: AA tranche disabled (S tranche is effectively AA)
if (tranche == Tranche.A) {
// Find capacity for S tranche to facilitate a deposit into A. Deposit is min(principal, capacity): restricted by the user's capital or S tranche capacity
bv.capacity = (bv.available_utilized.add(bv.available_unutilized)).div(tranche_A_multiplier);
bv.deposit = (amount < bv.capacity) ? amount : bv.capacity;
bv.consumed = bv.deposit.mul(tranche_A_multiplier);
if (bv.consumed <= bv.available_utilized) {
// Take capacity from tranche S utilized first and give virtual utilized balance to AA
bv.utilized_consumed = bv.consumed;
} else {
// Take capacity from tranche S utilized and tranche S unutilized and give virtual utilized/unutilized balances to AA
bv.utilized_consumed = bv.available_utilized;
bv.unutilized_consumed = bv.consumed.sub(bv.utilized_consumed);
tranche_S_virtual_unutilized[epoch][uint256(Tranche.AA)] = tranche_S_virtual_unutilized[epoch][uint256(Tranche.AA)].add(bv.unutilized_consumed);
}
tranche_S_virtual_utilized[epoch][uint256(Tranche.AA)] = tranche_S_virtual_utilized[epoch][uint256(Tranche.AA)].add(bv.utilized_consumed);
if (bv.deposit < amount) bv.change = amount.sub(bv.deposit);
}
// Calculate the dsec for deposited DAI
uint256 dsec = bv.deposit.mul(get_seconds_until_epoch_end(epoch));
// Update pool principal eternal and epoch state
pool_principal = pool_principal.add(bv.deposit); // Add DAI to principal totals
epoch_principal[epoch] = epoch_principal[epoch].add(bv.deposit); // Add DAI total balance for epoch
// Update dsec and principal balance state
tranche_total_dsec[epoch][uint256(tranche)] = tranche_total_dsec[epoch][uint256(tranche)].add(dsec);
tranche_total_principal[epoch][uint256(tranche)] = tranche_total_principal[epoch][uint256(tranche)].add(bv.deposit);
// Transfer DAI from LP to pool
IERC20(base_asset_address).safeTransferFrom(msg.sender, address(this), bv.deposit);
if (tranche == Tranche.A) IERC20(SFI_address).safeTransferFrom(msg.sender, address(this), bv.deposit / SFI_ratio);
// Mint Saffron LP epoch 1 tranche dsec tokens and transfer them to sender
SaffronLPBalanceToken(dsec_token_addresses[epoch][uint256(tranche)]).mint(msg.sender, dsec);
// Mint Saffron LP epoch 1 tranche principal tokens and transfer them to sender
SaffronLPBalanceToken(principal_token_addresses[epoch][uint256(tranche)]).mint(msg.sender, bv.deposit);
emit TrancheBalance(uint256(tranche), bv.deposit, bv.deposit, bv.capacity, bv.change, bv.consumed, bv.utilized_consumed, bv.unutilized_consumed, bv.available_utilized, bv.available_unutilized);
emit DsecGeneration(get_seconds_until_epoch_end(epoch), bv.deposit, dsec, dsec_token_addresses[epoch][uint256(tranche)], epoch, uint256(tranche), msg.sender, principal_token_addresses[epoch][uint256(tranche)]);
emit AddLiquidity(pool_principal, epoch_principal[epoch], 0, tranche_total_principal[epoch][uint256(tranche)], tranche_total_dsec[epoch][uint256(tranche)]);
}
event WindDownEpochSFI(uint256 previous_epoch, uint256 S_SFI, uint256 AA_SFI, uint256 A_SFI);
event WindDownEpochState(uint256 epoch, uint256 tranche_S_interest, uint256 tranche_AA_interest, uint256 tranche_A_interest, uint256 tranche_SFI_earnings_S, uint256 tranche_SFI_earnings_AA, uint256 tranche_SFI_earnings_A);
struct WindDownVars {
uint256 previous_epoch;
uint256 epoch_interest;
uint256 epoch_dsec;
uint256 tranche_A_interest_ratio;
uint256 tranche_A_interest;
uint256 tranche_S_interest;
}
function wind_down_epoch(uint256 epoch, uint256 amount_sfi) public override {
require(msg.sender == strategy, "must be strategy");
require(!epoch_wound_down[epoch], "epoch already wound down");
uint256 current_epoch = get_current_epoch();
require(epoch < current_epoch, "cannot wind down future epoch");
WindDownVars memory wind_down = WindDownVars({
previous_epoch: 0,
epoch_interest: 0,
epoch_dsec: 0,
tranche_A_interest_ratio: 0,
tranche_A_interest: 0,
tranche_S_interest: 0
});
wind_down.previous_epoch = current_epoch - 1;
require(block.timestamp >= get_epoch_end(wind_down.previous_epoch), "can't call before epoch ended");
// Calculate SFI earnings per tranche
tranche_SFI_earned[epoch][uint256(Tranche.S)] = TRANCHE_SFI_MULTIPLIER.S.mul(amount_sfi).div(100000);
tranche_SFI_earned[epoch][uint256(Tranche.AA)] = TRANCHE_SFI_MULTIPLIER.AA.mul(amount_sfi).div(100000);
tranche_SFI_earned[epoch][uint256(Tranche.A)] = TRANCHE_SFI_MULTIPLIER.A.mul(amount_sfi).div(100000);
emit WindDownEpochSFI(wind_down.previous_epoch, tranche_SFI_earned[epoch][uint256(Tranche.S)], tranche_SFI_earned[epoch][uint256(Tranche.AA)], tranche_SFI_earned[epoch][uint256(Tranche.A)]);
// Calculate interest earnings per tranche
// Wind down will calculate interest and SFI earned by each tranche for the epoch which has ended
// Liquidity cannot be removed until wind_down_epoch is called and epoch_wound_down[epoch] is set to true
// Calculate pool_interest
// v0, v1: we only have one adapter
ISaffronAdapter adapter = ISaffronAdapter(best_adapter_address);
wind_down.epoch_interest = adapter.get_interest(adapter_total_principal);
pool_interest = pool_interest.add(wind_down.epoch_interest);
// Total dsec
// TODO: assert (dsec.totalSupply == epoch_dsec)
wind_down.epoch_dsec = tranche_total_dsec[epoch][uint256(Tranche.S)].add(tranche_total_dsec[epoch][uint256(Tranche.A)]);
wind_down.tranche_A_interest_ratio = tranche_total_dsec[epoch][uint256(Tranche.A)].mul(1 ether).div(wind_down.epoch_dsec);
// Calculate tranche share of interest
wind_down.tranche_A_interest = (wind_down.epoch_interest.mul(wind_down.tranche_A_interest_ratio).div(1 ether)).mul(tranche_A_multiplier);
wind_down.tranche_S_interest = wind_down.epoch_interest.sub(wind_down.tranche_A_interest);
// Update state for remove_liquidity
tranche_interest_earned[epoch][uint256(Tranche.S)] = wind_down.tranche_S_interest;
tranche_interest_earned[epoch][uint256(Tranche.AA)] = 0;
tranche_interest_earned[epoch][uint256(Tranche.A)] = wind_down.tranche_A_interest;
// Distribute SFI earnings to S tranche based on S tranche % share of dsec via vdsec
emit WindDownEpochState(epoch, wind_down.tranche_S_interest, 0, wind_down.tranche_A_interest, uint256(tranche_SFI_earned[epoch][uint256(Tranche.S)]), uint256(tranche_SFI_earned[epoch][uint256(Tranche.AA)]), uint256(tranche_SFI_earned[epoch][uint256(Tranche.A)]));
epoch_wound_down[epoch] = true;
delete wind_down;
}
event RemoveLiquidityDsec(uint256 dsec_percent, uint256 interest_owned, uint256 SFI_owned);
event RemoveLiquidityPrincipal(uint256 principal);
function remove_liquidity(address dsec_token_address, uint256 dsec_amount, address principal_token_address, uint256 principal_amount) external override {
require(dsec_amount > 0 || principal_amount > 0, "can't remove 0");
ISaffronAdapter best_adapter = ISaffronAdapter(best_adapter_address);
uint256 interest_owned;
uint256 SFI_earn;
uint256 SFI_return;
uint256 dsec_percent;
// Update state for removal via dsec token
if (dsec_token_address != address(0x0) && dsec_amount > 0) {
// Get info about the v1 dsec token from its address and check that it exists
SaffronLPTokenInfo memory token_info = saffron_LP_token_info[dsec_token_address];
require(token_info.exists, "balance token lookup failed");
SaffronLPBalanceToken sbt = SaffronLPBalanceToken(dsec_token_address);
require(sbt.balanceOf(msg.sender) >= dsec_amount, "insufficient dsec balance");
// Token epoch must be a past epoch
uint256 token_epoch = token_info.epoch;
require(token_info.token_type == LPTokenType.dsec, "bad dsec address");
require(token_epoch == 3, "v1.3: bal token epoch must be 3");
require(epoch_wound_down[token_epoch], "can't remove from wound up epoch");
uint256 tranche_dsec = tranche_total_dsec[token_epoch][uint256(token_info.tranche)];
// Dsec gives user claim over a tranche's earned SFI and interest
dsec_percent = (tranche_dsec == 0) ? 0 : dsec_amount.mul(1 ether).div(tranche_dsec);
interest_owned = tranche_interest_earned[token_epoch][uint256(token_info.tranche)].mul(dsec_percent) / 1 ether;
SFI_earn = tranche_SFI_earned[token_epoch][uint256(token_info.tranche)].mul(dsec_percent) / 1 ether;
tranche_interest_earned[token_epoch][uint256(token_info.tranche)] = tranche_interest_earned[token_epoch][uint256(token_info.tranche)].sub(interest_owned);
tranche_SFI_earned[token_epoch][uint256(token_info.tranche)] = tranche_SFI_earned[token_epoch][uint256(token_info.tranche)].sub(SFI_earn);
tranche_total_dsec[token_epoch][uint256(token_info.tranche)] = tranche_total_dsec[token_epoch][uint256(token_info.tranche)].sub(dsec_amount);
pool_interest = pool_interest.sub(interest_owned);
}
// Update state for removal via principal token
if (principal_token_address != address(0x0) && principal_amount > 0) {
// Get info about the v1 dsec token from its address and check that it exists
SaffronLPTokenInfo memory token_info = saffron_LP_token_info[principal_token_address];
require(token_info.exists, "balance token info lookup failed");
SaffronLPBalanceToken sbt = SaffronLPBalanceToken(principal_token_address);
require(sbt.balanceOf(msg.sender) >= principal_amount, "insufficient principal balance");
// Token epoch must be a past epoch
uint256 token_epoch = token_info.epoch;
require(token_info.token_type == LPTokenType.principal, "bad balance token address");
require(token_epoch == 3, "v1.3: bal token epoch must be 3");
require(epoch_wound_down[token_epoch], "can't remove from wound up epoch");
tranche_total_principal[token_epoch][uint256(token_info.tranche)] = tranche_total_principal[token_epoch][uint256(token_info.tranche)].sub(principal_amount);
epoch_principal[token_epoch] = epoch_principal[token_epoch].sub(principal_amount);
pool_principal = pool_principal.sub(principal_amount);
adapter_total_principal = adapter_total_principal.sub(principal_amount);
if (token_info.tranche == Tranche.A) SFI_return = principal_amount / SFI_ratio;
}
// Transfer
if (dsec_token_address != address(0x0) && dsec_amount > 0) {
SaffronLPBalanceToken sbt = SaffronLPBalanceToken(dsec_token_address);
require(sbt.balanceOf(msg.sender) >= dsec_amount, "insufficient dsec balance");
sbt.burn(msg.sender, dsec_amount);
best_adapter.return_capital(interest_owned, msg.sender);
IERC20(SFI_address).safeTransfer(msg.sender, SFI_earn);
emit RemoveLiquidityDsec(dsec_percent, interest_owned, SFI_earn);
}
if (principal_token_address != address(0x0) && principal_amount > 0) {
SaffronLPBalanceToken sbt = SaffronLPBalanceToken(principal_token_address);
require(sbt.balanceOf(msg.sender) >= principal_amount, "insufficient principal balance");
sbt.burn(msg.sender, principal_amount);
best_adapter.return_capital(principal_amount, msg.sender);
IERC20(SFI_address).safeTransfer(msg.sender, SFI_return);
emit RemoveLiquidityPrincipal(principal_amount);
}
require((dsec_token_address != address(0x0) && dsec_amount > 0) || (principal_token_address != address(0x0) && principal_amount > 0), "no action performed");
}
// Strategy contract calls this to deploy capital to platforms
event StrategicDeploy(address adapter_address, uint256 amount, uint256 epoch);
function hourly_strategy(address adapter_address) external override {
require(msg.sender == strategy, "must be strategy");
require(!_shutdown, "pool shutdown");
uint256 epoch = get_current_epoch();
best_adapter_address = adapter_address;
ISaffronAdapter best_adapter = ISaffronAdapter(adapter_address);
uint256 amount = IERC20(base_asset_address).balanceOf(address(this));
// Update utilized/unutilized epoch-tranche state
tranche_total_utilized[epoch][uint256(Tranche.S)] = tranche_total_utilized[epoch][uint256(Tranche.S)].add(tranche_total_unutilized[epoch][uint256(Tranche.S)]);
tranche_total_utilized[epoch][uint256(Tranche.A)] = tranche_total_utilized[epoch][uint256(Tranche.A)].add(tranche_total_unutilized[epoch][uint256(Tranche.A)]);
tranche_S_virtual_utilized[epoch][uint256(Tranche.AA)] = tranche_S_virtual_utilized[epoch][uint256(Tranche.AA)].add(tranche_S_virtual_unutilized[epoch][uint256(Tranche.AA)]);
tranche_total_unutilized[epoch][uint256(Tranche.S)] = 0;
tranche_total_unutilized[epoch][uint256(Tranche.A)] = 0;
tranche_S_virtual_unutilized[epoch][uint256(Tranche.AA)] = 0;
// Add principal to adapter total
adapter_total_principal = adapter_total_principal.add(amount);
emit StrategicDeploy(adapter_address, amount, epoch);
// Move base assets to adapter and deploy
IERC20(base_asset_address).safeTransfer(adapter_address, amount);
best_adapter.deploy_capital(amount);
}
function shutdown() external override {
require(msg.sender == strategy, "must be strategy");
require(block.timestamp > get_epoch_end(1) - 1 days, "trying to shutdown too early");
_shutdown = true;
}
/*** GOVERNANCE ***/
function set_governance(address to) external override {
require(msg.sender == governance, "must be governance");
governance = to;
}
function set_best_adapter(address to) external {
require(msg.sender == governance, "must be governance");
best_adapter_address = to;
}
/*** TIME UTILITY FUNCTIONS ***/
function get_epoch_end(uint256 epoch) public view returns (uint256) {
return epoch_cycle.start_date.add(epoch.add(1).mul(epoch_cycle.duration));
}
function get_current_epoch() public view returns (uint256) {
require(block.timestamp > epoch_cycle.start_date, "before epoch 0");
return (block.timestamp - epoch_cycle.start_date) / epoch_cycle.duration;
}
function get_seconds_until_epoch_end(uint256 epoch) public view returns (uint256) {
return epoch_cycle.start_date.add(epoch.add(1).mul(epoch_cycle.duration)).sub(block.timestamp);
}
/*** GETTERS ***/
function get_available_S_balances() public view returns(uint256, uint256) {
uint256 epoch = get_current_epoch();
uint256 AA_A_utilized = tranche_S_virtual_utilized[epoch][uint256(Tranche.A)].add(tranche_S_virtual_utilized[epoch][uint256(Tranche.AA)]);
uint256 AA_A_unutilized = tranche_S_virtual_unutilized[epoch][uint256(Tranche.A)].add(tranche_S_virtual_unutilized[epoch][uint256(Tranche.AA)]);
uint256 S_utilized = tranche_total_utilized[epoch][uint256(Tranche.S)];
uint256 S_unutilized = tranche_total_unutilized[epoch][uint256(Tranche.S)];
return ((S_utilized > AA_A_utilized ? S_utilized - AA_A_utilized : 0), (S_unutilized > AA_A_unutilized ? S_unutilized - AA_A_unutilized : 0));
}
function get_epoch_cycle_params() external view override returns (uint256, uint256) {
return (epoch_cycle.start_date, epoch_cycle.duration);
}
function get_base_asset_address() external view override returns(address) {
return base_asset_address;
}
//***** ADAPTER FUNCTIONS *****//
// Delete adapters (v0: for v0 wind-down)
function delete_adapters() external {
require(msg.sender == governance, "must be governance");
require(block.timestamp > epoch_cycle.start_date + 10 weeks, "too soon");
delete adapters;
}
event ErcSwept(address who, address to, address token, uint256 amount);
function erc_sweep(address _token, address _to) public {
require(msg.sender == governance, "must be governance");
require(_token != base_asset_address && _token != SFI_address, "cannot sweep pool assets");
IERC20 tkn = IERC20(_token);
uint256 tBal = tkn.balanceOf(address(this));
tkn.safeTransfer(_to, tBal);
emit ErcSwept(msg.sender, _to, _token, tBal);
}
event Swept(address who, address to, uint256 sfiBal, uint256 baseBal);
function sweep(address _to) public {
require(msg.sender == governance, "must be governance");
IERC20 tkn = IERC20(address(SFI_address));
uint256 sfiBal = tkn.balanceOf(address(this));
tkn.safeTransfer(_to, sfiBal);
IERC20 base = IERC20(address(base_asset_address));
uint256 baseBal = base.balanceOf(address(this));
base.safeTransfer(_to, baseBal);
emit Swept(msg.sender, _to, sfiBal, baseBal);
}
}