Contract Source Code:

/**
 *Submitted for verification at Etherscan.io on 2019-12-16
*/

/**
 *Submitted for verification at Etherscan.io on 2018-09-01
*/

pragma solidity 0.5.8; 

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
    function totalSupply() public view returns (uint256);
    function balanceOf(address who) public view returns (uint256);
    function transfer(address to, uint256 value) public returns (bool);
    event Transfer(address indexed from, address indexed to, uint256 value);
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     *
     * _Available since v2.4.0._
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     *
     * _Available since v2.4.0._
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
    using SafeMath for uint256;

    mapping(address => uint256) balances;

    uint256 totalSupply_;

    /**
    * @dev total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return totalSupply_;
    }

    /**
    * @dev transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint256 _value) public returns (bool) {
        require(_to != address(0));
        require(_value <= balances[msg.sender]);

        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(_value);
        emit Transfer(msg.sender, _to, _value);
        return true;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public view returns (uint256) {
        return balances[_owner];
    }

}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender) public view returns (uint256);
  function transferFrom(address from, address to, uint256 value) public returns (bool);
  function approve(address spender, uint256 value) public returns (bool);
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   *
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(address _owner, address _spender) public view returns (uint256) {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   *
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
    allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   *
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
    uint oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

// File: openzeppelin-solidity/contracts/ownership/Ownable.sol

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
  address public owner;


  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0));
    emit OwnershipTransferred(owner, newOwner);
    owner = newOwner;
  }

}
// File: openzeppelin-solidity/contracts/token/ERC20/CappedToken.sol

/**
 * @title Capped token
 * @dev Mintable token with a token cap.
 */
contract CappedToken is StandardToken, Ownable{

    uint256 public cap;
    address public distributionContract;
    
    constructor(uint256 _cap, address _distributionContract) public {
        require(_cap > 0);
        cap = _cap;
        totalSupply_ = _cap;
        distributionContract = _distributionContract;
        balances[_distributionContract] = _cap;
    }

}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();

    bool public paused = false;


    /**
    * @dev Modifier to make a function callable only when the contract is not paused.
    */
    modifier whenNotPaused() {
        require(!paused);
        _;
    }

    /**
    * @dev Modifier to make a function callable only when the contract is paused.
    */
    modifier whenPaused() {
        require(paused);
        _;
    }

    /**
    * @dev called by the owner to pause, triggers stopped state
    */
    function pause() onlyOwner whenNotPaused public {
        paused = true;
        emit Pause();
    }

    /**
    * @dev called by the owner to unpause, returns to normal state
    */
    function unpause() onlyOwner whenPaused public {
        paused = false;
        emit Unpause();
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/PausableToken.sol

/**
 * @title Pausable token
 * @dev StandardToken modified with pausable transfers.
 **/
contract PausableToken is StandardToken, Pausable {

    function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
        return super.transfer(_to, _value);
    }

    function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
        return super.transferFrom(_from, _to, _value);
    }

    function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
        return super.approve(_spender, _value);
    }

    function increaseApproval(address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
        return super.increaseApproval(_spender, _addedValue);
    }

    function decreaseApproval(address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
        return super.decreaseApproval(_spender, _subtractedValue);
    }
}


// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <https://www.gnu.org/licenses/>.



contract TKNTToken is PausableToken, CappedToken {
    string public name = "TKNT";
    string public symbol = "TKNT";
    uint8 public decimals = 18;
    address public distributionContractAddress = 0xaaD926324e0E9C6b254049c00Fd16EBA9b034ad5;
    //                1 billion <---------|   |-----------------> 10^18
    uint256 constant TOTAL_CAP = 1000000000 * 1 ether;

    // FIXME: Here we've wanted to use constructor() keyword instead,
    // but solium/solhint lint softwares don't parse it properly as of
    // April 2018.
    constructor() public CappedToken(TOTAL_CAP, distributionContractAddress) {
        distributionContractAddress;
    }
}