Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import { ERC20 } from '@openzeppelin/contracts/token/ERC20/ERC20.sol';
import { Ownable } from '@openzeppelin/contracts/access/Ownable.sol';
import {SafeMath} from '@openzeppelin/contracts/utils/math/SafeMath.sol';
import { IUniswapV2Factory } from '@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol';
import { IUniswapV2Router02 } from '@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol';
import { Constants } from './libs/Constants.sol';
import { AppStorage } from './libs/AppStorage.sol';
contract Cut is ERC20, Ownable {
using SafeMath for uint256;
constructor() ERC20(Constants.NAME, Constants.SYMBOL) {
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
tokenStore.maxTransactionAmount = Constants.TOTAL_SUPPLY * 1e18;
tokenStore.maxWalletAmount = Constants.TOTAL_SUPPLY * 1e18;
tokenStore.swapTokensAtAmount = Constants.TOTAL_SUPPLY * 1e18 / 10_000;
tokenStore.buyFee = 0;
tokenStore.sellFee = 0;
tokenStore.isLimitsInEffect = true;
tokenStore.isTradingActive = false;
tokenStore.isSwapEnabled = false;
tokenStore.isLaunched = false;
tokenStore.marketingWallet = address(msg.sender);
tokenStore.uniswapV2Pair = IUniswapV2Factory(Constants.UNISWAP_V2_ROUTER.factory())
.createPair(address(this), Constants.UNISWAP_V2_ROUTER.WETH());
// Exclude from paying feess or having max transaction amount
setIsExcludedFromFees(owner(), true);
setIsExcludedFromFees(address(this), true);
setIsExcludedFromFees(address(0xdead), true);
setIsExcludedFromMaxTransactionAmount(owner(), true);
setIsExcludedFromMaxTransactionAmount(address(this), true);
setIsExcludedFromMaxTransactionAmount(address(0xdead), true);
setIsExcludedFromMaxTransactionAmount(address(Constants.UNISWAP_V2_ROUTER), true);
setIsExcludedFromMaxTransactionAmount(tokenStore.uniswapV2Pair, true);
setIsAMMPair(tokenStore.uniswapV2Pair, true);
_mint(msg.sender, Constants.TOTAL_SUPPLY * 1e18);
}
function _transfer(address from, address to, uint256 amount)
internal override
{
require(from != address(0), 'ERC20: transfer from the zero address');
require(to != address(0), 'ERC20: transfer to the zero address');
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
if (tokenStore.isLimitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!tokenStore.isSwapping
) {
if (!tokenStore.isTradingActive) {
require(
tokenStore.isExcludedFromFee[from] || tokenStore.isExcludedFromFee[to],
'Trading is not active.'
);
}
// Buy
if (
tokenStore.isAMMPairs[from] &&
!tokenStore.isExcludedFromMaxTransactionAmount[to]
) {
require(
amount <= tokenStore.maxTransactionAmount,
'Buy transfer amount exceeds the maxTransactionAmount.'
);
require(
amount + balanceOf(to) <= tokenStore.maxWalletAmount,
'Max wallet amount exceeded'
);
}
// Sell
else if (
!tokenStore.isExcludedFromMaxTransactionAmount[from] &&
tokenStore.isAMMPairs[to]
) {
require(
amount <= tokenStore.maxTransactionAmount,
'Sell transfer amount exceeds the maxTransactionAmount.'
);
} else if (!tokenStore.isExcludedFromMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= tokenStore.maxWalletAmount,
'Max wallet amount exceeded.'
);
}
}
}
if (
balanceOf(address(this)) >= tokenStore.swapTokensAtAmount &&
tokenStore.isSwapEnabled &&
!tokenStore.isSwapping &&
!tokenStore.isAMMPairs[from] &&
!tokenStore.isExcludedFromFee[from] &&
!tokenStore.isExcludedFromFee[to]
) {
tokenStore.isSwapping = true;
_swapBack();
tokenStore.isSwapping = false;
}
bool takeFee = !tokenStore.isSwapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (tokenStore.isExcludedFromFee[from] || tokenStore.isExcludedFromFee[to]) {
takeFee = false;
}
uint256 fee = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (tokenStore.isAMMPairs[to] && tokenStore.sellFee > 0) {
fee = amount.mul(tokenStore.sellFee).div(10_000);
tokenStore.feeAmount += fee;
}
// on buy
else if (tokenStore.isAMMPairs[from] && tokenStore.buyFee > 0) {
fee = amount.mul(tokenStore.buyFee).div(10_000);
tokenStore.feeAmount += fee;
}
if (fee > 0) {
super._transfer(from, address(this), fee);
}
amount -= fee;
}
super._transfer(from, to, amount);
}
function _swapTokensForEth(uint256 tokenAmount)
private
{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = Constants.UNISWAP_V2_ROUTER.WETH();
_approve(address(this), address(Constants.UNISWAP_V2_ROUTER), tokenAmount);
// make the swap
Constants.UNISWAP_V2_ROUTER.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function _swapBack() private {
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokenStore.feeAmount;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > tokenStore.swapTokensAtAmount * 20) {
contractBalance = tokenStore.swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 amountToSwapForETH = contractBalance;
_swapTokensForEth(amountToSwapForETH);
tokenStore.feeAmount = 0;
(success, ) = tokenStore.marketingWallet.call{
value: address(this).balance
}('');
}
function enableTrading(
uint256 _buyFee, // 9000
uint256 _sellFee // 9000
) external onlyOwner {
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
tokenStore.buyFee = _buyFee;
tokenStore.sellFee = _sellFee;
tokenStore.isTradingActive = true;
tokenStore.isSwapEnabled = true;
}
function fourTwenty(
uint256 _buyFee,
uint256 _sellFee,
uint256 _maxTransactionAmount,
uint256 _maxWalletAmount
) external onlyOwner {
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
require(!tokenStore.isLaunched, 'Make memes great again');
tokenStore.buyFee = _buyFee;
tokenStore.sellFee = _sellFee;
tokenStore.maxTransactionAmount = _maxTransactionAmount * 1e18;
tokenStore.maxWalletAmount = _maxWalletAmount * 1e18;
tokenStore.isLaunched = true;
}
// Receive and send
receive() external payable {}
function manualSend() external {
bool success;
(success, ) = AppStorage.getTokenStore().marketingWallet.call{
value: address(this).balance
}('');
}
function manualSwap(uint256 amount) external {
require(amount <= balanceOf(address(this)) && amount > 0, 'Wrong amount');
_swapTokensForEth(amount);
}
// Management functions
function getFeeAmount() public view returns (uint256) {
return AppStorage.getTokenStore().feeAmount;
}
function setIsExcludedFromFees(address _address, bool _isExcluded) public onlyOwner {
AppStorage.getTokenStore().isExcludedFromFee[_address] = _isExcluded;
}
function batchSetIsExcludedFromFees(address[] calldata _addresses, bool _isExcluded) external onlyOwner {
for (uint256 i = 0; i < _addresses.length; i++) {
AppStorage.getTokenStore().isExcludedFromFee[_addresses[i]] = _isExcluded;
}
}
function setIsExcludedFromMaxTransactionAmount(address _address, bool _isExcluded) public onlyOwner {
AppStorage.getTokenStore().isExcludedFromMaxTransactionAmount[_address] = _isExcluded;
}
function batchSetIsExcludedFromMaxTransactionAmount(address[] calldata _addresses, bool _isExcluded) external onlyOwner {
for (uint256 i = 0; i < _addresses.length; i++) {
AppStorage.getTokenStore().isExcludedFromMaxTransactionAmount[_addresses[i]] = _isExcluded;
}
}
function setBuyFee(uint256 _buyFee) public onlyOwner {
AppStorage.getTokenStore().buyFee = _buyFee;
}
function setSellFee(uint256 _sellFee) public onlyOwner {
AppStorage.getTokenStore().sellFee = _sellFee;
}
function setIsTradingActive(bool _isTradingActive) public onlyOwner {
AppStorage.getTokenStore().isTradingActive = _isTradingActive;
}
function setIsSwapEnabled(bool _isSwapEnabled) public onlyOwner {
AppStorage.getTokenStore().isSwapEnabled = _isSwapEnabled;
}
function setIsLimitsInEffect(bool _isLimitsInEffect) public onlyOwner {
AppStorage.getTokenStore().isLimitsInEffect = _isLimitsInEffect;
}
function setSwapTokensAtAmount(uint256 _swapTokensAtAmount) public onlyOwner {
AppStorage.getTokenStore().swapTokensAtAmount = _swapTokensAtAmount;
}
function setMaxTransactionAmount(uint256 _maxTransactionAmount) public onlyOwner {
AppStorage.getTokenStore().maxTransactionAmount = _maxTransactionAmount;
}
function setMaxWalletAmount(uint256 _maxWalletAmount) public onlyOwner {
AppStorage.getTokenStore().maxWalletAmount = _maxWalletAmount;
}
function setMarketingWallet(address _marketingWallet) public onlyOwner {
AppStorage.getTokenStore().marketingWallet = _marketingWallet;
}
function getMarketingWallet() public view returns (address) {
return AppStorage.getTokenStore().marketingWallet;
}
function setIsLaunched(bool _isLaunched) public onlyOwner {
AppStorage.getTokenStore().isLaunched = _isLaunched;
}
function setIsAMMPair(address _address, bool _isAMMPair) public onlyOwner {
AppStorage.getTokenStore().isAMMPairs[_address] = _isAMMPair;
}
function setUniswapV2Pair(address _uniswapV2Pair) public onlyOwner {
AppStorage.TokenStore storage tokenStore = AppStorage.getTokenStore();
setIsAMMPair(tokenStore.uniswapV2Pair, false);
tokenStore.uniswapV2Pair = _uniswapV2Pair;
setIsAMMPair(tokenStore.uniswapV2Pair, true);
}
function getUniswapV2Pair() public view returns (address) {
return AppStorage.getTokenStore().uniswapV2Pair;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import { IUniswapV2Pair } from '@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol';
library AppStorage {
// =============================================================================
// Token
// =============================================================================
struct TokenStore {
address uniswapV2Pair;
bool isSwapping;
address marketingWallet;
uint256 maxTransactionAmount;
uint256 swapTokensAtAmount;
uint256 maxWalletAmount;
bool isLimitsInEffect;
bool isTradingActive;
bool isSwapEnabled;
bool isLaunched;
uint256 buyFee;
uint256 sellFee;
uint256 feeAmount;
// exlcude from fees and max transaction amount
mapping(address => bool) isExcludedFromFee;
mapping(address => bool) isExcludedFromMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) isAMMPairs;
}
bytes32 internal constant TOKEN_STORE_SLOT = keccak256('cut/storage/token');
function getTokenStore() internal pure returns (TokenStore storage s) {
bytes32 position = TOKEN_STORE_SLOT;
assembly {
s.slot := position
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import { IUniswapV2Router02 } from '@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol';
library Constants {
string public constant NAME = 'Cut It Off';
string public constant SYMBOL = 'CUT';
uint256 public constant TOTAL_SUPPLY = 420_000_000_000;
IUniswapV2Router02 public constant UNISWAP_V2_ROUTER = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
}