Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/extensions/IERC20Metadata.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 amount) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
/**
* @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
/**
* @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
* calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
*/
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
/**
* @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 oldAllowance = token.allowance(address(this), spender);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
}
/**
* @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful.
*/
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
}
}
/**
* @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
* non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
* 0 before setting it to a non-zero value.
*/
function forceApprove(IERC20 token, address spender, uint256 value) internal {
bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);
if (!_callOptionalReturnBool(token, approvalCall)) {
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
_callOptionalReturn(token, approvalCall);
}
}
/**
* @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
* Revert on invalid signature.
*/
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*
* This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
*/
function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
// and not revert is the subcall reverts.
(bool success, bytes memory returndata) = address(token).call(data);
return
success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*
* Furthermore, `isContract` will also return true if the target contract within
* the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
* which only has an effect at the end of a transaction.
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableMap.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableMap.js.
pragma solidity ^0.8.0;
import "./EnumerableSet.sol";
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```solidity
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* The following map types are supported:
*
* - `uint256 -> address` (`UintToAddressMap`) since v3.0.0
* - `address -> uint256` (`AddressToUintMap`) since v4.6.0
* - `bytes32 -> bytes32` (`Bytes32ToBytes32Map`) since v4.6.0
* - `uint256 -> uint256` (`UintToUintMap`) since v4.7.0
* - `bytes32 -> uint256` (`Bytes32ToUintMap`) since v4.7.0
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableMap, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableMap.
* ====
*/
library EnumerableMap {
using EnumerableSet for EnumerableSet.Bytes32Set;
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct Bytes32ToBytes32Map {
// Storage of keys
EnumerableSet.Bytes32Set _keys;
mapping(bytes32 => bytes32) _values;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(Bytes32ToBytes32Map storage map, bytes32 key, bytes32 value) internal returns (bool) {
map._values[key] = value;
return map._keys.add(key);
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToBytes32Map storage map, bytes32 key) internal returns (bool) {
delete map._values[key];
return map._keys.remove(key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool) {
return map._keys.contains(key);
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function length(Bytes32ToBytes32Map storage map) internal view returns (uint256) {
return map._keys.length();
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToBytes32Map storage map, uint256 index) internal view returns (bytes32, bytes32) {
bytes32 key = map._keys.at(index);
return (key, map._values[key]);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bool, bytes32) {
bytes32 value = map._values[key];
if (value == bytes32(0)) {
return (contains(map, key), bytes32(0));
} else {
return (true, value);
}
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToBytes32Map storage map, bytes32 key) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), "EnumerableMap: nonexistent key");
return value;
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToBytes32Map storage map,
bytes32 key,
string memory errorMessage
) internal view returns (bytes32) {
bytes32 value = map._values[key];
require(value != 0 || contains(map, key), errorMessage);
return value;
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(Bytes32ToBytes32Map storage map) internal view returns (bytes32[] memory) {
return map._keys.values();
}
// UintToUintMap
struct UintToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToUintMap storage map, uint256 key, uint256 value) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToUintMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToUintMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToUintMap storage map, uint256 index) internal view returns (uint256, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToUintMap storage map, uint256 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToUintMap storage map, uint256 key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key)));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToUintMap storage map, uint256 key, string memory errorMessage) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(key), errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(UintToUintMap storage map) internal view returns (uint256[] memory) {
bytes32[] memory store = keys(map._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintToAddressMap
struct UintToAddressMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
UintToAddressMap storage map,
uint256 key,
string memory errorMessage
) internal view returns (address) {
return address(uint160(uint256(get(map._inner, bytes32(key), errorMessage))));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(UintToAddressMap storage map) internal view returns (uint256[] memory) {
bytes32[] memory store = keys(map._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressToUintMap
struct AddressToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(AddressToUintMap storage map, address key, uint256 value) internal returns (bool) {
return set(map._inner, bytes32(uint256(uint160(key))), bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(AddressToUintMap storage map, address key) internal returns (bool) {
return remove(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(AddressToUintMap storage map, address key) internal view returns (bool) {
return contains(map._inner, bytes32(uint256(uint160(key))));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(AddressToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressToUintMap storage map, uint256 index) internal view returns (address, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (address(uint160(uint256(key))), uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(AddressToUintMap storage map, address key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, bytes32(uint256(uint160(key))));
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(AddressToUintMap storage map, address key) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
AddressToUintMap storage map,
address key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, bytes32(uint256(uint160(key))), errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(AddressToUintMap storage map) internal view returns (address[] memory) {
bytes32[] memory store = keys(map._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// Bytes32ToUintMap
struct Bytes32ToUintMap {
Bytes32ToBytes32Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(Bytes32ToUintMap storage map, bytes32 key, uint256 value) internal returns (bool) {
return set(map._inner, key, bytes32(value));
}
/**
* @dev Removes a value from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(Bytes32ToUintMap storage map, bytes32 key) internal returns (bool) {
return remove(map._inner, key);
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool) {
return contains(map._inner, key);
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(Bytes32ToUintMap storage map) internal view returns (uint256) {
return length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the map. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32ToUintMap storage map, uint256 index) internal view returns (bytes32, uint256) {
(bytes32 key, bytes32 value) = at(map._inner, index);
return (key, uint256(value));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function tryGet(Bytes32ToUintMap storage map, bytes32 key) internal view returns (bool, uint256) {
(bool success, bytes32 value) = tryGet(map._inner, key);
return (success, uint256(value));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(Bytes32ToUintMap storage map, bytes32 key) internal view returns (uint256) {
return uint256(get(map._inner, key));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(
Bytes32ToUintMap storage map,
bytes32 key,
string memory errorMessage
) internal view returns (uint256) {
return uint256(get(map._inner, key, errorMessage));
}
/**
* @dev Return the an array containing all the keys
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the map grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function keys(Bytes32ToUintMap storage map) internal view returns (bytes32[] memory) {
bytes32[] memory store = keys(map._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```solidity
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/interfaces/IERC20Metadata.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
interface IERC1644 is IERC20 {
// Controller Events
event ControllerTransfer(
address _controller,
address indexed _from,
address indexed _to,
uint256 _value,
bytes _data,
bytes _operatorData
);
event ControllerRedemption(
address _controller,
address indexed _tokenHolder,
uint256 _value,
bytes _data,
bytes _operatorData
);
// Controller Operation
function isControllable() external view returns (bool);
function controllerTransfer(address _from, address _to, uint256 _value, bytes calldata _data, bytes calldata _operatorData) external;
function controllerRedeem(address _tokenHolder, uint256 _value, bytes calldata _data, bytes calldata _operatorData) external;
}
interface IERC1643 {
// Document Events
event DocumentRemoved(bytes32 indexed _name, string _uri, bytes32 _documentHash);
event DocumentUpdated(bytes32 indexed _name, string _uri, bytes32 _documentHash);
// Document Management
function getDocument(bytes32 _name) external view returns (string memory, bytes32, uint256);
function setDocument(bytes32 _name, string calldata _uri, bytes32 _documentHash) external;
function removeDocument(bytes32 _name) external;
function getAllDocuments() external view returns (bytes32[] memory);
}
interface IERC1594 is IERC20 {
// Issuance / Redemption Events
event Issued(address indexed _operator, address indexed _to, uint256 _value, bytes _data);
event Redeemed(address indexed _operator, address indexed _from, uint256 _value, bytes _data);
// Transfers
function transferWithData(address _to, uint256 _value, bytes calldata _data) external;
function transferFromWithData(address _from, address _to, uint256 _value, bytes calldata _data) external;
// Token Issuance
function isIssuable() external view returns (bool);
function issue(address _tokenHolder, uint256 _value, bytes calldata _data) external;
// Token Redemption
function redeem(uint256 _value, bytes calldata _data) external;
function redeemFrom(address _tokenHolder, uint256 _value, bytes calldata _data) external;
// Transfer Validity
function canTransfer(address _to, uint256 _value, bytes calldata _data) external view returns (bool, uint8, bytes32);
function canTransferFrom(address _from, address _to, uint256 _value, bytes calldata _data) external view returns (bool, uint8, bytes32);
}
struct Permission {
bool sendAllowed; // default: true
bool receiveAllowed;
// Address holder’s KYC will be validated till this time, after that the holder needs to re-KYC.
uint64 expiryTime; // default:0 validated forever
}
interface ISTBT is IERC20, IERC20Metadata, IERC1594, IERC1643, IERC1644 {
event InterestsDistributed(int interest, uint newTotalSupply, uint interestFromTime, uint interestToTime);
event TransferShares(address indexed from, address indexed to, uint256 sharesValue);
function issuer() external view returns (address);
function controller() external view returns (address);
function moderator() external view returns (address);
function totalShares() external view returns (uint);
function allowance(address _owner, address _spender) external view returns (uint256);
function permissions(address addr) external view returns (bool sendAllowed,
bool receiveAllowed,
uint64 expiryTime);
function lastDistributeTime() external view returns (uint64);
function minDistributeInterval() external view returns (uint64);
function maxDistributeRatio() external view returns (uint64);
function setIssuer(address _issuer) external;
function setController(address _controller) external;
function setModerator(address _moderator) external;
function setMinDistributeInterval(uint64 interval) external;
function setMaxDistributeRatio(uint64 ratio) external;
function setPermission(address addr, Permission calldata permission) external;
function distributeInterests(int256 _distributedInterest, uint interestFromTime, uint interestToTime) external;
function increaseAllowance(address _spender, uint256 _addedValue) external returns (bool);
function decreaseAllowance(address _spender, uint256 _subtractedValue) external returns (bool);
function sharesOf(address _account) external view returns (uint256);
function getSharesByAmount(uint256 _amount) external view returns (uint256 result);
function getSharesByAmountRoundUp(uint256 _amount) external view returns (uint256 result);
function getAmountByShares(uint256 _shares) external view returns (uint256 result);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.0;
interface IStbtTimelockController {
function schedule(
address target,
uint256 value,
bytes calldata data,
bytes32 predecessor,
bytes32 salt,
uint256 /*delay*/
) external;
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableMap.sol";
import "./interfaces/ISTBT.sol";
import "./interfaces/IStbtTimelockController.sol";
contract Minter is Ownable {
using SafeERC20 for IERC20;
using EnumerableMap for EnumerableMap.AddressToUintMap;
struct DepositConfig {
bool needDivAdjust;
uint96 adjustUnit;
uint96 minimumDepositAmount;
}
struct RedeemConfig {
bool needDivAdjust;
uint96 adjustUnit;
uint96 minimumRedeemAmount;
}
address public timeLockContract;
address public targetContract;
address public poolAccount;
uint64 public nonceForRedeem;
uint64 public virtualCountOfRedeemSettled;
uint64 public nonceForMint;
mapping(address => DepositConfig) public depositConfigMap;
mapping(address => RedeemConfig) public redeemConfigMap;
mapping(address => uint) public redeemFeeRateMap;
mapping(uint => address) public redeemTargetMap;
uint public depositPeriod;
uint public redeemPeriod;
EnumerableMap.AddressToUintMap private purchaseInfoMap;
uint private constant UNIT = 10**18;
event Mint(address indexed requestor, address indexed token, uint indexed nonce,
uint depositAmount, uint proposeAmount, bytes32 salt, bytes data);
event Redeem(address indexed requestor, address indexed token, uint indexed nonce, uint amount,
bytes32 salt, bytes data);
event Settle(address indexed target, address indexed token, uint indexed nonce, uint amount,
bytes32 redeemTxId, uint redeemServiceFeeRate, uint executionPrice);
constructor(address _timeLockContract, address _targetContract, address _poolAccount) Ownable() {
timeLockContract = _timeLockContract;
targetContract = _targetContract;
poolAccount = _poolAccount;
uint64 _nonceStart = uint64(1000 * block.timestamp);
nonceForMint = _nonceStart;
nonceForRedeem = _nonceStart;
virtualCountOfRedeemSettled = _nonceStart;
}
function setCoinInfo(address token, uint receiverAndRate) onlyOwner external {
require(uint96(receiverAndRate) < UNIT, "MINTER: FEE_RATE_TOO_LARGE");
purchaseInfoMap.set(token, receiverAndRate);
}
function getCoinInfo(address coin) external view returns (uint) {
return purchaseInfoMap.get(coin);
}
function getCoinsInfo() external view returns (address[] memory coinList, uint[] memory receiverAndRateList) {
coinList = new address[](purchaseInfoMap.length());
receiverAndRateList = new uint[](purchaseInfoMap.length());
for(uint i=0; i<coinList.length; i++) {
(address coin, uint reveiverAndRate) = purchaseInfoMap.at(i);
coinList[i] = coin;
receiverAndRateList[i] = reveiverAndRate;
}
}
function setDepositConfig(address token, DepositConfig calldata config) onlyOwner external {
depositConfigMap[token] = config;
}
function setRedeemConfig(address token, RedeemConfig calldata config) onlyOwner external {
redeemConfigMap[token] = config;
}
function setRedeemFeeRate(address token, uint r) onlyOwner external {
redeemFeeRateMap[token] = r;
}
function setDepositPeriod(uint p) onlyOwner external {
depositPeriod = p;
}
function setRedeemPeriod(uint p) onlyOwner external {
redeemPeriod = p;
}
function setTimeLockContract(address _timeLockContract) onlyOwner external {
timeLockContract = _timeLockContract;
}
function setTargetContract(address _targetContract) onlyOwner external {
targetContract = _targetContract;
}
function setPoolAccount(address _poolAccount) onlyOwner external {
poolAccount = _poolAccount;
}
// token: which token to deposit?
// depositAmount: how much to deposit?
// minProposedAmount: the sender use this value to protect against sudden rise of feeRate
// salt: a random number that can affect TimelockController's input salt
// extraData: will be used to call STBT's issue function
function mint(address token, uint depositAmount, uint minProposedAmount, bytes32 salt,
bytes calldata extraData) external {
{
(, bool receiveAllowed, uint64 expiryTime) = ISTBT(targetContract).permissions(msg.sender);
require(receiveAllowed, 'MINTER: NO_RECEIVE_PERMISSION');
require(expiryTime == 0 || expiryTime > block.timestamp, 'MINTER: RECEIVE_PERMISSION_EXPIRED');
}
uint receiverAndRate = purchaseInfoMap.get(token);
require(receiverAndRate != 0, "MINTER: TOKEN_NOT_SUPPORTED");
address receiver = address(uint160(receiverAndRate>>96));
uint feeRate = uint96(receiverAndRate);
DepositConfig memory config = depositConfigMap[token];
require(config.minimumDepositAmount != 0 &&
depositAmount >= config.minimumDepositAmount, "MINTER: DEPOSIT_AMOUNT_TOO_SMALL");
uint proposeAmount = depositAmount*(UNIT-feeRate)/UNIT;
proposeAmount = config.needDivAdjust? proposeAmount / config.adjustUnit : proposeAmount * config.adjustUnit;
require(proposeAmount >= minProposedAmount, "MINTER: PROPOSE_AMOUNT_TOO_SMALL");
IERC20(token).safeTransferFrom(msg.sender, receiver, depositAmount);
bytes memory data = abi.encodeWithSignature("issue(address,uint256,bytes)",
msg.sender, proposeAmount, extraData);
uint64 _nonceForMint = nonceForMint;
salt = keccak256(abi.encodePacked(salt, _nonceForMint));
nonceForMint = _nonceForMint + 1;
IStbtTimelockController(timeLockContract).schedule(targetContract, 0, data, bytes32(""), salt, 0);
emit Mint(msg.sender, token, _nonceForMint, depositAmount, proposeAmount, salt, data);
}
// token: which token to receive after redeem?
// amount: how much STBT to deposit?
// salt: a random number that can affect TimelockController's input salt
// extraData: will be used to call STBT's redeemFrom function
function redeem(uint amount, address token, bytes32 salt, bytes calldata extraData) external {
RedeemConfig memory config = redeemConfigMap[token];
require(config.minimumRedeemAmount != 0 &&
amount >= config.minimumRedeemAmount, "MINTER: REDEEM_AMOUNT_TOO_SMALL");
IERC20(targetContract).safeTransferFrom(msg.sender, poolAccount, amount);
bytes memory data = abi.encodeWithSignature("redeemFrom(address,uint256,bytes)",
poolAccount, amount, extraData);
uint adjusted = config.needDivAdjust? amount / config.adjustUnit : amount * config.adjustUnit;
salt = keccak256(abi.encodePacked(salt, nonceForRedeem));
IStbtTimelockController(timeLockContract).schedule(targetContract, 0, data, bytes32(""), salt, 0);
redeemTargetMap[nonceForRedeem] = msg.sender;
emit Redeem(msg.sender, token, nonceForRedeem, adjusted, salt, data);
nonceForRedeem = nonceForRedeem + 1;
}
// token: which token to refund the customer?
// amount: how much to refund?
// nonce: the nonce assigned to this redeem operation
// redeemTxId: at which tx did the customer call 'redeem'?
// redeemServiceFeeRate: some of the refunded tokens will be deducted as fee
// executionPrice: the price of STBT measure by 'token'
function redeemSettle(address token, uint amount, uint64 nonce, bytes32 redeemTxId,
uint redeemServiceFeeRate, uint executionPrice) onlyOwner external {
virtualCountOfRedeemSettled++;
address target = redeemTargetMap[nonce];
require(target != address(0), "MINTER: NULL_TARGET");
delete redeemTargetMap[nonce];
IERC20(token).safeTransfer(target, amount);
emit Settle(target, token, nonce, amount, redeemTxId, redeemServiceFeeRate, executionPrice);
}
// the rescue ETH or ERC20 tokens which were accidentally sent to this contract
function rescue(address token, address receiver, uint amount) onlyOwner external {
require(virtualCountOfRedeemSettled == nonceForRedeem, "MINTER: PENDING_REDEEM");
IERC20(token).safeTransfer(receiver, amount);
}
}