Contract Source Code:
File 1 of 1 : Folia
// File: openzeppelin-solidity/contracts/introspection/IERC165.sol
pragma solidity ^0.5.0;
/**
* @title IERC165
* @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-165.md
*/
interface IERC165 {
/**
* @notice Query if a contract implements an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @dev Interface identification is specified in ERC-165. This function
* uses less than 30,000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.5.0;
/**
* @title ERC721 Non-Fungible Token Standard basic interface
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract IERC721 is IERC165 {
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
function balanceOf(address owner) public view returns (uint256 balance);
function ownerOf(uint256 tokenId) public view returns (address owner);
function approve(address to, uint256 tokenId) public;
function getApproved(uint256 tokenId) public view returns (address operator);
function setApprovalForAll(address operator, bool _approved) public;
function isApprovedForAll(address owner, address operator) public view returns (bool);
function transferFrom(address from, address to, uint256 tokenId) public;
function safeTransferFrom(address from, address to, uint256 tokenId) public;
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.5.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
contract IERC721Receiver {
/**
* @notice Handle the receipt of an NFT
* @dev The ERC721 smart contract calls this function on the recipient
* after a `safeTransfer`. This function MUST return the function selector,
* otherwise the caller will revert the transaction. The selector to be
* returned can be obtained as `this.onERC721Received.selector`. This
* function MAY throw to revert and reject the transfer.
* Note: the ERC721 contract address is always the message sender.
* @param operator The address which called `safeTransferFrom` function
* @param from The address which previously owned the token
* @param tokenId The NFT identifier which is being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
public returns (bytes4);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @title SafeMath
* @dev Unsigned math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
pragma solidity ^0.5.0;
/**
* Utility library of inline functions on addresses
*/
library Address {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param account address of the account to check
* @return whether the target address is a contract
*/
function isContract(address account) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
}
// File: openzeppelin-solidity/contracts/introspection/ERC165.sol
pragma solidity ^0.5.0;
/**
* @title ERC165
* @author Matt Condon (@shrugs)
* @dev Implements ERC165 using a lookup table.
*/
contract ERC165 is IERC165 {
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* 0x01ffc9a7 ===
* bytes4(keccak256('supportsInterface(bytes4)'))
*/
/**
* @dev a mapping of interface id to whether or not it's supported
*/
mapping(bytes4 => bool) private _supportedInterfaces;
/**
* @dev A contract implementing SupportsInterfaceWithLookup
* implement ERC165 itself
*/
constructor () internal {
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev implement supportsInterface(bytes4) using a lookup table
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev internal method for registering an interface
*/
function _registerInterface(bytes4 interfaceId) internal {
require(interfaceId != 0xffffffff);
_supportedInterfaces[interfaceId] = true;
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.5.0;
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721 is ERC165, IERC721 {
using SafeMath for uint256;
using Address for address;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from token ID to owner
mapping (uint256 => address) private _tokenOwner;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to number of owned token
mapping (address => uint256) private _ownedTokensCount;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* 0x80ac58cd ===
* bytes4(keccak256('balanceOf(address)')) ^
* bytes4(keccak256('ownerOf(uint256)')) ^
* bytes4(keccak256('approve(address,uint256)')) ^
* bytes4(keccak256('getApproved(uint256)')) ^
* bytes4(keccak256('setApprovalForAll(address,bool)')) ^
* bytes4(keccak256('isApprovedForAll(address,address)')) ^
* bytes4(keccak256('transferFrom(address,address,uint256)')) ^
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) ^
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)'))
*/
constructor () public {
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
}
/**
* @dev Gets the balance of the specified address
* @param owner address to query the balance of
* @return uint256 representing the amount owned by the passed address
*/
function balanceOf(address owner) public view returns (uint256) {
require(owner != address(0));
return _ownedTokensCount[owner];
}
/**
* @dev Gets the owner of the specified token ID
* @param tokenId uint256 ID of the token to query the owner of
* @return owner address currently marked as the owner of the given token ID
*/
function ownerOf(uint256 tokenId) public view returns (address) {
address owner = _tokenOwner[tokenId];
require(owner != address(0));
return owner;
}
/**
* @dev Approves another address to transfer the given token ID
* The zero address indicates there is no approved address.
* There can only be one approved address per token at a given time.
* Can only be called by the token owner or an approved operator.
* @param to address to be approved for the given token ID
* @param tokenId uint256 ID of the token to be approved
*/
function approve(address to, uint256 tokenId) public {
address owner = ownerOf(tokenId);
require(to != owner);
require(msg.sender == owner || isApprovedForAll(owner, msg.sender));
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Gets the approved address for a token ID, or zero if no address set
* Reverts if the token ID does not exist.
* @param tokenId uint256 ID of the token to query the approval of
* @return address currently approved for the given token ID
*/
function getApproved(uint256 tokenId) public view returns (address) {
require(_exists(tokenId));
return _tokenApprovals[tokenId];
}
/**
* @dev Sets or unsets the approval of a given operator
* An operator is allowed to transfer all tokens of the sender on their behalf
* @param to operator address to set the approval
* @param approved representing the status of the approval to be set
*/
function setApprovalForAll(address to, bool approved) public {
require(to != msg.sender);
_operatorApprovals[msg.sender][to] = approved;
emit ApprovalForAll(msg.sender, to, approved);
}
/**
* @dev Tells whether an operator is approved by a given owner
* @param owner owner address which you want to query the approval of
* @param operator operator address which you want to query the approval of
* @return bool whether the given operator is approved by the given owner
*/
function isApprovedForAll(address owner, address operator) public view returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Transfers the ownership of a given token ID to another address
* Usage of this method is discouraged, use `safeTransferFrom` whenever possible
* Requires the msg sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function transferFrom(address from, address to, uint256 tokenId) public {
require(_isApprovedOrOwner(msg.sender, tokenId));
_transferFrom(from, to, tokenId);
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
*
* Requires the msg sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev Safely transfers the ownership of a given token ID to another address
* If the target address is a contract, it must implement `onERC721Received`,
* which is called upon a safe transfer, and return the magic value
* `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
* the transfer is reverted.
* Requires the msg sender to be the owner, approved, or operator
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes data to send along with a safe transfer check
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
transferFrom(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data));
}
/**
* @dev Returns whether the specified token exists
* @param tokenId uint256 ID of the token to query the existence of
* @return whether the token exists
*/
function _exists(uint256 tokenId) internal view returns (bool) {
address owner = _tokenOwner[tokenId];
return owner != address(0);
}
/**
* @dev Returns whether the given spender can transfer a given token ID
* @param spender address of the spender to query
* @param tokenId uint256 ID of the token to be transferred
* @return bool whether the msg.sender is approved for the given token ID,
* is an operator of the owner, or is the owner of the token
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
address owner = ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Internal function to mint a new token
* Reverts if the given token ID already exists
* @param to The address that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
require(to != address(0));
require(!_exists(tokenId));
_tokenOwner[tokenId] = to;
_ownedTokensCount[to] = _ownedTokensCount[to].add(1);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Internal function to burn a specific token
* Reverts if the token does not exist
* Deprecated, use _burn(uint256) instead.
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
require(ownerOf(tokenId) == owner);
_clearApproval(tokenId);
_ownedTokensCount[owner] = _ownedTokensCount[owner].sub(1);
_tokenOwner[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Internal function to burn a specific token
* Reverts if the token does not exist
* @param tokenId uint256 ID of the token being burned
*/
function _burn(uint256 tokenId) internal {
_burn(ownerOf(tokenId), tokenId);
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to transferFrom, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
require(ownerOf(tokenId) == from);
require(to != address(0));
_clearApproval(tokenId);
_ownedTokensCount[from] = _ownedTokensCount[from].sub(1);
_ownedTokensCount[to] = _ownedTokensCount[to].add(1);
_tokenOwner[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Internal function to invoke `onERC721Received` on a target address
* The call is not executed if the target address is not a contract
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
internal returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes4 retval = IERC721Receiver(to).onERC721Received(msg.sender, from, tokenId, _data);
return (retval == _ERC721_RECEIVED);
}
/**
* @dev Private function to clear current approval of a given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _clearApproval(uint256 tokenId) private {
if (_tokenApprovals[tokenId] != address(0)) {
_tokenApprovals[tokenId] = address(0);
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Enumerable.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract IERC721Enumerable is IERC721 {
function totalSupply() public view returns (uint256);
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);
function tokenByIndex(uint256 index) public view returns (uint256);
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Enumerable.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token with optional enumeration extension logic
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Enumerable is ERC165, ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => uint256[]) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* 0x780e9d63 ===
* bytes4(keccak256('totalSupply()')) ^
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) ^
* bytes4(keccak256('tokenByIndex(uint256)'))
*/
/**
* @dev Constructor function
*/
constructor () public {
// register the supported interface to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev Gets the token ID at a given index of the tokens list of the requested owner
* @param owner address owning the tokens list to be accessed
* @param index uint256 representing the index to be accessed of the requested tokens list
* @return uint256 token ID at the given index of the tokens list owned by the requested address
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
require(index < balanceOf(owner));
return _ownedTokens[owner][index];
}
/**
* @dev Gets the total amount of tokens stored by the contract
* @return uint256 representing the total amount of tokens
*/
function totalSupply() public view returns (uint256) {
return _allTokens.length;
}
/**
* @dev Gets the token ID at a given index of all the tokens in this contract
* Reverts if the index is greater or equal to the total number of tokens
* @param index uint256 representing the index to be accessed of the tokens list
* @return uint256 token ID at the given index of the tokens list
*/
function tokenByIndex(uint256 index) public view returns (uint256) {
require(index < totalSupply());
return _allTokens[index];
}
/**
* @dev Internal function to transfer ownership of a given token ID to another address.
* As opposed to transferFrom, this imposes no restrictions on msg.sender.
* @param from current owner of the token
* @param to address to receive the ownership of the given token ID
* @param tokenId uint256 ID of the token to be transferred
*/
function _transferFrom(address from, address to, uint256 tokenId) internal {
super._transferFrom(from, to, tokenId);
_removeTokenFromOwnerEnumeration(from, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
}
/**
* @dev Internal function to mint a new token
* Reverts if the given token ID already exists
* @param to address the beneficiary that will own the minted token
* @param tokenId uint256 ID of the token to be minted
*/
function _mint(address to, uint256 tokenId) internal {
super._mint(to, tokenId);
_addTokenToOwnerEnumeration(to, tokenId);
_addTokenToAllTokensEnumeration(tokenId);
}
/**
* @dev Internal function to burn a specific token
* Reverts if the token does not exist
* Deprecated, use _burn(uint256) instead
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
_removeTokenFromOwnerEnumeration(owner, tokenId);
// Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
_ownedTokensIndex[tokenId] = 0;
_removeTokenFromAllTokensEnumeration(tokenId);
}
/**
* @dev Gets the list of token IDs of the requested owner
* @param owner address owning the tokens
* @return uint256[] List of token IDs owned by the requested address
*/
function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
return _ownedTokens[owner];
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
_ownedTokensIndex[tokenId] = _ownedTokens[to].length;
_ownedTokens[to].push(tokenId);
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the _ownedTokensIndex mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
_ownedTokens[from].length--;
// Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occcupied by
// lasTokenId, or just over the end of the array if the token was the last one).
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length.sub(1);
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
_allTokens.length--;
_allTokensIndex[tokenId] = 0;
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/IERC721Metadata.sol
pragma solidity ^0.5.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract IERC721Metadata is IERC721 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Metadata.sol
pragma solidity ^0.5.0;
contract ERC721Metadata is ERC165, ERC721, IERC721Metadata {
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/**
* 0x5b5e139f ===
* bytes4(keccak256('name()')) ^
* bytes4(keccak256('symbol()')) ^
* bytes4(keccak256('tokenURI(uint256)'))
*/
/**
* @dev Constructor function
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
}
/**
* @dev Gets the token name
* @return string representing the token name
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev Gets the token symbol
* @return string representing the token symbol
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns an URI for a given token ID
* Throws if the token ID does not exist. May return an empty string.
* @param tokenId uint256 ID of the token to query
*/
function tokenURI(uint256 tokenId) external view returns (string memory) {
require(_exists(tokenId));
return _tokenURIs[tokenId];
}
/**
* @dev Internal function to set the token URI for a given token
* Reverts if the token ID does not exist
* @param tokenId uint256 ID of the token to set its URI
* @param uri string URI to assign
*/
function _setTokenURI(uint256 tokenId, string memory uri) internal {
require(_exists(tokenId));
_tokenURIs[tokenId] = uri;
}
/**
* @dev Internal function to burn a specific token
* Reverts if the token does not exist
* Deprecated, use _burn(uint256) instead
* @param owner owner of the token to burn
* @param tokenId uint256 ID of the token being burned by the msg.sender
*/
function _burn(address owner, uint256 tokenId) internal {
super._burn(owner, tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC721/ERC721Full.sol
pragma solidity ^0.5.0;
/**
* @title Full ERC721 Token
* This implementation includes all the required and some optional functionality of the ERC721 standard
* Moreover, it includes approve all functionality using operator terminology
* @dev see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
*/
contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
// solhint-disable-previous-line no-empty-blocks
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.5.0;
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: openzeppelin-solidity/contracts/access/Roles.sol
pragma solidity ^0.5.0;
/**
* @title Roles
* @dev Library for managing addresses assigned to a Role.
*/
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev give an account access to this role
*/
function add(Role storage role, address account) internal {
require(account != address(0));
require(!has(role, account));
role.bearer[account] = true;
}
/**
* @dev remove an account's access to this role
*/
function remove(Role storage role, address account) internal {
require(account != address(0));
require(has(role, account));
role.bearer[account] = false;
}
/**
* @dev check if an account has this role
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0));
return role.bearer[account];
}
}
// File: contracts/helpers/strings.sol
/*
* @title String & slice utility library for Solidity contracts.
* @author Nick Johnson <[email protected]>
*/
pragma solidity ^0.5.0;
library strings {
struct slice {
uint _len;
uint _ptr;
}
function memcpy(uint dest, uint src, uint len) private pure {
// Copy word-length chunks while possible
for (; len >= 32; len -= 32) {
assembly {
mstore(dest, mload(src))
}
dest += 32;
src += 32;
}
// Copy remaining bytes
uint mask = 256 ** (32 - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask))
let destpart := and(mload(dest), mask)
mstore(dest, or(destpart, srcpart))
}
}
/*
* @dev Returns a slice containing the entire string.
* @param self The string to make a slice from.
* @return A newly allocated slice containing the entire string.
*/
function toSlice(string memory self) internal pure returns (slice memory) {
uint ptr;
assembly {
ptr := add(self, 0x20)
}
return slice(bytes(self).length, ptr);
}
/*
* @dev Returns a newly allocated string containing the concatenation of
* `self` and `other`.
* @param self The first slice to concatenate.
* @param other The second slice to concatenate.
* @return The concatenation of the two strings.
*/
function concat(slice memory self, slice memory other) internal pure returns (string memory) {
string memory ret = new string(self._len + other._len);
uint retptr;
assembly {
retptr := add(ret, 32)
}
memcpy(retptr, self._ptr, self._len);
memcpy(retptr + self._len, other._ptr, other._len);
return ret;
}
}
// File: contracts/Metadata.sol
pragma solidity ^0.5.0;
/**
* Metadata contract is upgradeable and returns metadata about Token
*/
contract Metadata {
using strings for *;
function tokenURI(uint _tokenId) public pure returns (string memory _infoUrl) {
string memory base = "https://folia.app/v1/metadata/";
string memory id = uint2str(_tokenId);
return base.toSlice().concat(id.toSlice());
}
function uint2str(uint i) internal pure returns (string memory) {
if (i == 0) return "0";
uint j = i;
uint length;
while (j != 0) {
length++;
j /= 10;
}
bytes memory bstr = new bytes(length);
uint k = length - 1;
while (i != 0) {
uint _uint = 48 + i % 10;
bstr[k--] = toBytes(_uint)[31];
i /= 10;
}
return string(bstr);
}
function toBytes(uint256 x) public pure returns (bytes memory b) {
b = new bytes(32);
assembly { mstore(add(b, 32), x) }
}
}
// File: contracts/Folia.sol
pragma solidity ^0.5.0;
/**
* The Token contract does this and that...
*/
contract Folia is ERC721Full, Ownable {
using Roles for Roles.Role;
Roles.Role private _admins;
uint8 admins;
address public metadata;
address public controller;
modifier onlyAdminOrController() {
require((_admins.has(msg.sender) || msg.sender == controller), "DOES_NOT_HAVE_ADMIN_OR_CONTROLLER_ROLE");
_;
}
modifier onlyAdmin() {
require(_admins.has(msg.sender), "DOES_NOT_HAVE_ADMIN_ROLE");
_;
}
/**
* @dev Checks msg.sender can transfer a token, by being owner, approved, operator or controller
* @param _tokenId uint256 ID of the token to validate
*/
modifier canTransfer(uint256 _tokenId) {
require(_isApprovedOrOwner(msg.sender, _tokenId) || msg.sender == controller);
_;
}
constructor(string memory name, string memory symbol, address _metadata) public ERC721Full(name, symbol) {
metadata = _metadata;
_admins.add(msg.sender);
admins += 1;
}
function mint(address recepient, uint256 tokenId) public onlyAdminOrController {
_mint(recepient, tokenId);
}
function burn(uint256 tokenId) public onlyAdminOrController {
_burn(ownerOf(tokenId), tokenId);
}
function updateMetadata(address _metadata) public onlyAdminOrController {
metadata = _metadata;
}
function updateController(address _controller) public onlyAdminOrController {
controller = _controller;
}
function addAdmin(address _admin) public onlyOwner {
_admins.add(_admin);
admins += 1;
}
function removeAdmin(address _admin) public onlyOwner {
require(admins > 1, "CANT_REMOVE_LAST_ADMIN");
_admins.remove(_admin);
admins -= 1;
}
function tokenURI(uint _tokenId) external view returns (string memory _infoUrl) {
return Metadata(metadata).tokenURI(_tokenId);
}
/**
* @dev Moves Eth to a certain address for use in the CloversController
* @param _to The address to receive the Eth.
* @param _amount The amount of Eth to be transferred.
*/
function moveEth(address payable _to, uint256 _amount) public onlyAdminOrController {
require(_amount <= address(this).balance);
_to.transfer(_amount);
}
/**
* @dev Moves Token to a certain address for use in the CloversController
* @param _to The address to receive the Token.
* @param _amount The amount of Token to be transferred.
* @param _token The address of the Token to be transferred.
*/
function moveToken(address _to, uint256 _amount, address _token) public onlyAdminOrController returns (bool) {
require(_amount <= IERC20(_token).balanceOf(address(this)));
return IERC20(_token).transfer(_to, _amount);
}
}